PROLINE®DESIGNER SERIES®ARCHITECT SERIES®
Pella 2007 Architectural Design Manual • Division 08 – Openings • Windows and Doors • www.PellaADM.com 8-9
IN-SWING FRENCH
8–IN-SW
ING
FREN
CH
Scale 1/8" = 1' 0"
(1) Clad units also available with grilles-between-the-glass on these sizes.
All doors and sidelights are glazed with tempered glass.
Left-hand single doors shown, right-hand and fixed also available.
Wood and Aluminum EnduraClad ® Exterior6' 8" and 6' 10"
Size Tables
Traditional grille patterns shown.See Grille Types page for additional patterns and profiles.
PROLINE®DESIGNER SERIES®ARCHITECT SERIES®
Pella 2007 Architectural Design Manual • Division 08 – Openings • Windows and Doors • www.PellaADM.com8-10
IN-SWING FRENCH
8–IN
-SW
ING
FR
ENC
H
Scale 1/8" = 1' 0"
(1) Clad units also available with grilles-between-the-glass on these sizes.
All doors and sidelights are glazed with tempered glass.
Left-hand single doors shown, right-hand and fixed also available.
Wood and Aluminum EnduraClad® Exterior7' 2" and 8' 0"Size Tables
PROLINE®DESIGNER SERIES®ARCHITECT SERIES®
Pella 2007 Architectural Design Manual • Division 08 – Openings • Windows and Doors • www.PellaADM.com 8-11
IN-SWING FRENCH
8–IN-SW
ING
FREN
CH
Scale 1/8" = 1' 0"
Frame Width Frame Height
Minimum Maximum Minimum Maximum
Single Door 25-3/8" 37-7/8" 80-1/8" 95-1/2"
Double Door 50" 75-1/16" 80-1/8" 95-1/2"
Transom 25-1/4" 75-3/4" 17" 25"
Sidelight 18" 18" 80-1/8" 95-1/2"
(1) Available within size range shown.
Keep frame dimensions to the nearest 1/8" increment.
Special Size Frame Dimensions 1
T Tempered glass is standard.
Wood and Aluminum EnduraClad ® ExteriorTransom
Size Tables
Contact your local Pella sales representative for new transom designs available February 2007.
Go to www.PellaADM.comfor complete illustrationsand downloadable CAD details
PROLINE®DESIGNER SERIES®ARCHITECT SERIES®
Pella 2007 Architectural Design Manual • Division 08 – Openings • Windows and Doors • www.PellaADM.com8-12
IN-SWING FRENCH
8–IN
-SW
ING
FR
ENC
H
Grille Profiles
Integral Light Technology with Clad Exterior1
(1) Available in Pine, Mahogany, Alder or Douglas Fir to match complete unit.
Grille TypesIntegral Light Technology and Removable Interior
Scale 3" = 1' 0"
Removable Interior Pine Bars
Integral Light Technology with Wood Exterior2
(2) Available in Pine or Mahogany to match complete unit.
PROLINE®DESIGNER SERIES®ARCHITECT SERIES®
Pella 2007 Architectural Design Manual • Division 08 – Openings • Windows and Doors • www.PellaADM.com 8-13
IN-SWING FRENCH
8–IN-SW
ING
FREN
CH
Prairie Lite Patterns
All sidelights and transoms will have 9 lights.
Standard corner lite dimension for Prairie patterns = 3-1/2" VG.
ILT – 9-Lite available in all standard and special sizes.
14-Lite available in units > 2' 1-1/2" width.
Removable Grilles – 9-Lite available in units < 7' 1-3/4" height.
12-Lite available in units > 6' 11-1/2" height.
Typical Grille PatternsFor traditional pattern, see size tables.
Other Available Patterns
Top Row – Standard visible glass to separator bar = 14" or half of total visible glass height, whichever is smaller.
Cross – Standard visible glass to separator bar = one-quarter of total visible glass height.
New England – Standard visible glass to separator bar = half of total visible glass height.
VG = Visible Glass
Lite dimensions noted can vary.
Custom configurations are available; for details contact your local Pella sales representative.
Grille TypesIntegral Light Technology and Removable Interior
PROLINE®DESIGNER SERIES®ARCHITECT SERIES®
Pella 2007 Architectural Design Manual • Division 08 – Openings • Windows and Doors • www.PellaADM.com8-14
IN-SWING FRENCH
8–IN
-SW
ING
FR
ENC
H
Shape 4Z Shape CZ Shape 12 Shape 03
Shape BZShape AZShape 3Z Shape 2Z
Shape 14 Shape 13 Shape 05 Shape 04
Shape 4Z Shape CZ Shape 03 Shape 12
Pella Architect Series In-Swing French doors are available in custom shapes shown below, and additional shapes per drawing. For specifications, size limitations, and details on these units, contact your local Pella sales representative.
Wood and Aluminum EnduraClad ® ExteriorCustom Shapes
PROLINE®DESIGNER SERIES®ARCHITECT SERIES®
Pella 2007 Architectural Design Manual • Division 08 – Openings • Windows and Doors • www.PellaADM.com 8-15
IN-SWING FRENCH
8–IN-SW
ING
FREN
CH
(1) All dimensions are approximate to the nearest 1/16". The second value, where shown, provides the clear opening for the active panel only.
To convert areas to square meters (m2), multiply square feet by 0.0929.
Wood and Aluminum EnduraClad® ExteriorDesign Data
Unit
Single and
Double Doors
Clear OpeningPerformance
Class and Grade
Width (172°)
Width (90°)
Standard Sill Unit Height
ADA Sill Unit Height
Vent Area (Standard
Sill)
Vent Area (ADA Sill)
Visible Glass Ft2
Frame Area Ft2
6' 8" DOORS3081 F — — 76-5/8 78-11/16 — — 7.8 16.7 R253681 F — — 76-5/8 78-11/16 — — 10.4 20.0 R252681 L / R 22-3/8 20-1/8 76-5/8 78-11/16 11.9 12.2 5.7 14.1 R253081 L / R 27 24-3/4 76-5/8 78-11/16 14.4 14.7 7.8 16.7 R253481 L / R 30-1/2 28-1/4 76-5/8 78-11/16 16.2 16.7 9.3 18.6 R253681 L / R 33 30-3/4 76-5/8 78-11/16 17.6 18.0 10.4 20.0 R253881 L / R 34-7/8 32-5/8 76-5/8 78-11/16 18.6 19.0 11.2 21.1 R255081 PA / AP 47 / 22-3/8 42-9/16 / 20-1/8 76-5/8 78-11/16 25.0 25.9 11.4 27.8 R256081 PA / AP 56-1/4 / 26-15/16 51-13/16 / 24-3/4 76-5/8 78-11/16 29.9 30.7 15.5 33.0 R256781 PA / AP 63-1/4 / 30-7/16 58-13/16 / 28-1/4 76-5/8 78-11/16 33.6 34.6 18.7 36.9 R257281 PA / AP 68-1/4 / 32-15/16 63-13/16 / 30-3/4 76-5/8 78-11/16 36.3 37.3 20.8 39.6 R257581 PA / AP 72-1/16 / 34-7/8 67-5/8 / 32-5/8 76-5/8 78-11/16 38.3 39.4 22.5 41.8 R256' 10" DOORS3082 F — — 77-15/16 79-9/16 — — 7.9 17.0 R253682 F — — 77-15/16 79-9/16 — — 10.6 20.4 R252682 L / R 22-3/8 20-1/8 77-15/16 79-9/16 12.1 12.4 5.9 14.4 R253082 L / R 27 24-3/4 77-15/16 79-9/16 14.6 14.9 7.9 17.0 R253482 L / R 30-1/2 28-1/4 77-15/16 79-9/16 16.5 16.9 9.5 19.0 R253682 L / R 33 30-3/4 77-15/16 79-9/16 17.9 18.2 10.6 20.4 R253882 L / R 34-7/8 32-5/8 77-15/16 79-9/16 18.9 19.3 11.5 21.4 R255082 PA / AP 47 / 22-3/8 42-9/16 / 20-1/8 77-15/16 79-9/16 25.4 26.0 11.7 28.3 R256082 PA / AP 56-1/4 / 26-15/16 51-13/16 / 24-3/4 77-15/16 79-9/16 30.4 31.1 15.8 33.5 R256782 PA / AP 63-1/4 / 30-7/16 58-13/16 / 28-1/4 77-15/16 79-9/16 34.2 35.0 19.1 37.5 R257282 PA / AP 68-1/4 / 32-15/16 63-13/16 / 30-3/4 77-15/16 79-9/16 36.9 37.7 21.3 40.3 R257582 PA / AP 72-1/16 / 34-7/8 67-5/8 / 32-5/8 77-15/16 79-9/16 39.0 39.8 23.0 42.5 R257' 2" DOORS3086 F — — 82-7/16 84-1/16 — — 8.5 17.9 R253686 F — — 82-7/16 84-1/16 — — 11.4 21.5 R252686 L / R 22-3/8 20-1/8 82-7/16 84-1/16 12.8 13.1 6.3 15.2 R253086 L / R 27 24-3/4 82-7/16 84-1/16 15.4 15.8 8.5 17.9 R253486 L / R 30-1/2 28-1/4 82-7/16 84-1/16 17.5 17.8 10.2 20.0 R253686 L / R 33 30-3/4 82-7/16 84-1/16 18.9 19.3 11.4 21.5 R253886 L / R 34-7/8 32-5/8 82-7/16 84-1/16 20.0 20.4 12.3 22.6 R255086 PA / AP 47 / 22-3/8 42-9/16 / 20-1/8 82-7/16 84-1/16 26.9 27.4 12.5 29.9 R256086 PA / AP 56-1/4 / 26-15/16 51-13/16 / 24-3/4 82-7/16 84-1/16 32.2 32.8 17.0 35.4 R256786 PA / AP 63-1/4 / 30-7/16 58-13/16 / 28-1/4 82-7/16 84-1/16 36.2 36.9 20.4 39.6 R257286 PA / AP 68-1/4 / 32-15/16 63-13/16 / 30-3/4 82-7/16 84-1/16 39.1 39.8 22.8 42.6 R257586 PA / AP 72-1/16 / 34-7/8 67-5/8 / 32-5/8 82-7/16 84-1/16 41.3 42.1 24.6 44.8 R258' DOORS3096 F — — 91-15/16 93-9/16 — — 9.6 19.9 R253696 F — — 91-15/16 93-9/16 — — 12.9 23.9 R252696 L / R 22-3/8 20-1/8 91-15/16 93-9/16 14.2 14.5 7.1 16.8 R253096 L / R 27 24-3/4 91-15/16 93-9/16 17.2 17.5 9.6 19.9 R253496 L / R 30-1/2 28-1/4 91-15/16 93-9/16 19.5 19.8 11.5 22.2 R253696 L / R 33 30-3/4 91-15/16 93-9/16 21.1 21.4 12.9 23.9 R253896 L / R 34-7/8 32-5/8 91-15/16 93-9/16 22.3 22.7 13.9 25.1 R255096 PA / AP 47 / 22-3/8 42-9/16 / 20-1/8 91-15/16 93-9/16 30.0 30.5 14.2 33.2 R256096 PA / AP 56-1/4 / 26-15/16 51-13/16 / 24-3/4 91-15/16 93-9/16 35.9 36.5 19.3 39.3 R256796 PA / AP 63-1/4 / 30-7/16 58-13/16 / 28-1/4 91-15/16 93-9/16 40.4 41.1 23.2 43.9 R257296 PA / AP 68-1/4 / 32-15/16 63-13/16 / 30-3/4 91-15/16 93-9/16 43.6 44.3 25.8 47.3 R257596 PA / AP 72-1/16 / 34-7/8 67-5/8 / 32-5/8 91-15/16 93-9/16 46.0 46.8 27.9 49.8 R25
PROLINE®DESIGNER SERIES®ARCHITECT SERIES®
Pella 2007 Architectural Design Manual • Division 08 – Openings • Windows and Doors • www.PellaADM.com8-16
IN-SWING FRENCH
8–IN
-SW
ING
FR
ENC
H
UnitVisible
Glass Ft2
Frame Area Ft2
TRANSOMS
2617 0.9 3.0
2625 1.6 4.4
3017 1.2 3.5
3025 2.2 5.2
3417 1.5 4.0
3425 2.6 5.8
3617 1.6 4.2
3625 2.9 6.2
3817 1.7 4.4
3825 3.2 6.5
5017 2.6 5.9
5025 4.7 8.7
6017 3.3 7.0
6025 5.9 10.3
6717 3.8 7.8
6725 6.8 11.5
7217 4.2 8.4
7225 7.4 12.4
7517 4.4 8.8
7525 7.8 13.0
SIDELIGHTS
1881 4.9 10.0
1882 5.1 10.2
1886 5.4 10.8
1896 6.1 11.9
To convert areas to square meters (m2), multiply square feet by 0.0929.
Contact your local Pella sales representative for new transom designs available February 2007.
CLEAR OPENING SCHEMATIC
Wood and Aluminum EnduraClad® ExteriorDesign Data
Doors Transoms Sidelights
Visible Glass
Width (Single Door) = Frame – 12-15/32"Width (Double Door) = (Frame – 24-1/4") / 2Height = Frame – 16-1/4"
Width = Frame – 3-1/4"Height = Frame – 3-1/4"
Width = Frame – 9-1/16"Height = Frame – 16-1/4"
Actual Glass
Width (Single Door) = Frame – 11-9/32"Width (Double Door) = (Frame – 21-7/8") / 2Height = Frame – 15-1/16"
Width = Frame – 2"Height = Frame – 2"
Width = Frame – 7-7/8" Height = Frame – 15-1/16"
Clad and Wood
Width Height
Clear Opening(@ 90º)
Width (Double Door—Active Panel) = (Frame / 2) – 4-3/8"Width (Double Door—Both Panels) = Frame – 6-21/32"Width (Single Door) = Frame – 4-15/16"
Height = Frame – 3-1/4"
Clear Opening(@ 172º)
Width (Double Door—Active Panel) = (Frame Width / 2) – 2-7/16"Width (Double Door—Both Panels) = Frame – 3-5/32"Width (Single Door) = Frame – 3"
Height = Frame – 3-1/4"
Miscellaneous Formulas