8/13/2019 Schematics Update User Bulletin
1/26
Schematics Update
Release 12.0.SP6
User Bulletin
8/13/2019 Schematics Update User Bulletin
2/26
Disclaimer
Information of a technical nature, and particulars of the product and its use, is given by AVEVASolutions Ltd. without warranty. However, it is acknowledged that there may be errors or omissions inthis publication.
Neither the author nor AVEVA Solutions Ltd. shall be liable to any person or entity for any actions,claims, loss, or damage arising from the use or possession of any information, particulars, or errors inthis publication, or any incorrect use of the product, whatsoever.
Copyright
All rights reserved. The information contained in this document is commercially sensitive, and shall notbe copied, reproduced, stored in a retrieval system, or transmitted without the prior written permission ofAVEVA Solutions Ltd. Where such permission is granted, it expressly requires that this Disclaimer andCopyright notice is prominently displayed at the beginning of every copy that is made.
Neither whole nor part of the product described in this publication may be adapted, reproduced, reverseengineered, or copied in any material or electronic form without the prior written permission of AVEVASolutions Ltd.
Neither whole nor part of the product described in this publication may be incorporated into any third-party software, product, machine, or system without the prior written permission of AVEVA SolutionsLtd.
The AVEVA products described in this guide are to be installed and operated strictly in accordance withthe terms and conditions of the respective license agreements, and in accordance with the relevant UserDocumentation. Unauthorised or unlicensed use of the product is strictly prohibited.
First published 2010.
AVEVA Solutions Ltd and its subsidiaries.
AVEVA Solutions Ltd, High Cross, Madingley Road, Cambridge, CB3 0HB, United Kingdom.
TrademarksAVEVA is the registered trademark of AVEVA Solutions Ltd. Unauthorised use of the AVEVA trademarkis strictly forbidden.
Microsoft, Windows, and Windows XP are trademarks or registered trademarks of the MicrosoftCorporation, registered in the USA and elsewhere.
Intel is a trademark or registered trademark of the Intel Corporation, registered in the USA andelsewhere.
Any other product name or logo is the copyright, trademark, or registered trademark of its respectiveowner.
8/13/2019 Schematics Update User Bulletin
3/26
12/10/2010 3
Contents
Schematics Update Release 1Release 12.0.SP6 1User Bu l let in 11. In t roduct ion 4
1.1 About this Software Release 41.2 About this Manual 41.3 Software Distribution & Installation 41.4 AVEVA Schematic Model Products Portfolio 51.5 Operating Environment 5
1.5.1 PC hardware configuration 51.6 Upgrading from the 12.0.SP6 Release 5
2. AVEVA Diagrams 72.1 Flow Direction Enhancements 72.2 Area Shapes 82.3 Auto Formatting Rules 92.4 Release Diagram Sheets to 3D and Performance of the SaveWork Command10 2.5 Update of Multiple Diagrams 112.6 Save As with Copy of DB Data 122.7 Session defaults 132.8
DWG File Export Enhancements 14
2.9 New Excel Import / Export Function 152.10 Export Consistency Check Result to File 16
3. Schematic 3D Integrator 173.1 Line List Comparison 173.2 Comparison Colour Key 183.3 Print Compare Report and Export Compare Report to Excel 193.4 New Diagram Viewer 20
4. Schemat ic Model Manager 214.1 New Excel Import / Export function 214.2 New Diagram Viewer 22
5. AVEVA Instrum entat ion Data Update Ad d-in 235.1 Filtering Function 235.2 Cable Data Interface 24
http://sena1_offline/users/lena.strand/Release%20Documentation/Bulletins/12.0.SP6_Bulletin/User%20Bulletin%20Schematics%20Add-on%20Pack%20for%20120sp6_v3.doc%23_Toc274214207http://sena1_offline/users/lena.strand/Release%20Documentation/Bulletins/12.0.SP6_Bulletin/User%20Bulletin%20Schematics%20Add-on%20Pack%20for%20120sp6_v3.doc%23_Toc274214207http://sena1_offline/users/lena.strand/Release%20Documentation/Bulletins/12.0.SP6_Bulletin/User%20Bulletin%20Schematics%20Add-on%20Pack%20for%20120sp6_v3.doc%23_Toc274214208http://sena1_offline/users/lena.strand/Release%20Documentation/Bulletins/12.0.SP6_Bulletin/User%20Bulletin%20Schematics%20Add-on%20Pack%20for%20120sp6_v3.doc%23_Toc274214208http://sena1_offline/users/lena.strand/Release%20Documentation/Bulletins/12.0.SP6_Bulletin/User%20Bulletin%20Schematics%20Add-on%20Pack%20for%20120sp6_v3.doc%23_Toc274214209http://sena1_offline/users/lena.strand/Release%20Documentation/Bulletins/12.0.SP6_Bulletin/User%20Bulletin%20Schematics%20Add-on%20Pack%20for%20120sp6_v3.doc%23_Toc274214209http://sena1_offline/users/lena.strand/Release%20Documentation/Bulletins/12.0.SP6_Bulletin/User%20Bulletin%20Schematics%20Add-on%20Pack%20for%20120sp6_v3.doc%23_Toc274214209http://sena1_offline/users/lena.strand/Release%20Documentation/Bulletins/12.0.SP6_Bulletin/User%20Bulletin%20Schematics%20Add-on%20Pack%20for%20120sp6_v3.doc%23_Toc274214208http://sena1_offline/users/lena.strand/Release%20Documentation/Bulletins/12.0.SP6_Bulletin/User%20Bulletin%20Schematics%20Add-on%20Pack%20for%20120sp6_v3.doc%23_Toc2742142078/13/2019 Schematics Update User Bulletin
4/26
12/10/2010 4
1. Introduction
1.1 About this Software ReleaseThe 12.0.SP6 Schematics Update Release is supplied on a DVD-R, which self-installs using
standard Microsoft installation procedures. The full software suite is usually loaded onto individual
PCs running Windows, with the license server and file loaded onto a networked Windows server.
The 12.0.SP6 Schematics Update Release is deployed as fix release no 8 on top of either AVEVA
PDMS 12.0.SP6.or AVEVA Hull & Outfitting 12.0.SP6. So it is a pre-requisite to first install 12.0.SP6
before applying the 12.0.SP6 Schematics Update Release. Any error corrections and minor
improvements delivered as part of previous hotfixes have been rolled up and are included into the
12.0.SP6 Schematics Update Release. In addition to this the 12.0.SP6 Schematics Update
Release also includes a number of new features for the Schematics applications, which are
AVEVA Diagrams, AVEVA Schematic Model Manager and AVEVA Schematic 3D Integrator.
Please note that 12.0.SP6 onwards requires Flexman 5 and an appropriate licenseit will notwork with Flexman 3 or 4. For further details of Flexman License Server releases, please seehttp://support.aveva.com/support/United_Kingdom/Flexman/Flexman_Software_Profiles.htm.
1.2 About this Manual
This manual gives an overview of changes in the Schematic Model Applications since the
12.0.SP6 Service Pack. It is primarily aimed at users upgrading from that release. Users that
upgrade from previous releases will have to also refer the User Bulletins for 12.0.SP6 to obtain a
complete understanding of the full functional scope of this release.
1.3 Software Distribution & Installation
Please note that the installation process has been changed for 12.0.SP4 onwards. The installers
now use standard Microsoft Installer (MSI) technology, which facilitates silent installations through
standard MSI means. They are usually triggered by use of a setup.exe file.
http://support.aveva.com/support/United_Kingdom/Flexman/Flexman_Software_Profiles.htmhttp://support.aveva.com/support/United_Kingdom/Flexman/Flexman_Software_Profiles.htmhttp://support.aveva.com/support/United_Kingdom/Flexman/Flexman_Software_Profiles.htm8/13/2019 Schematics Update User Bulletin
5/26
12/10/2010 5
1.4 AVEVA Schematic Model Products Portfolio
The AVEVA Schematic Model Product portfolio consists of the following products all based on the
AVEVA Design Platform and Dabacon database technologies. These are add-on applications to
12.0.SP6 as follows.
AVEVA Diagrams Used for creating P&IDs, HVAC and Cable diagrams. It saves both
the diagram and the engineering objects in the Schematic Model
database.
AVEVA Schematic
Model Manager
Provides unrivalled features for the consolidation of all P&ID data
for a project, independently of the P&ID authoring tool.
AVEVA Schematic 3D
Integrator
Provides an integrated Schematic / 3D environment that allows
customers to build their 3D model in a controlled manner, directly
from the information on a P&ID, and enables consistency checks
between the Schematic model and the 3D model.
1.5 Operating Environment
1.5.1 PC hardware configuration
Please refer to the Minimum Systems Requirements Manual.
1.6 Upgrading from the 12.0.SP6 Release
The 12.0.SP6 Schematics Update Release is fully compatible with 12.0.SP6 data with the followingexception:
8/13/2019 Schematics Update User Bulletin
6/26
12/10/2010 6
Note!:The following settings files for AVEVA Diagrams will need to be manually upgraded:
DiagramsAttributePresentation.xml
DiagramsDefaultSettings.xml
The files that are included in the 12.0.SP6 delivery may contain additional settings that have been
added in this release. If these files will be manually overwritten with the previous files holdingapplication settings done by users, the new settings will no longer be visible in e.g. the Diagrams
Options dialogue.
Recommended procedure:
1. Back up the current versions of these files
2. Install the 12.0.SP6 Schematics Update Release
3. Merge the files by either copying and inserting new settings from the new files into the old
ones or by copying and applying user settings from the old files into the new ones. It is
recommended to use an XML merging tool for this task. One example of an XML merge
tool is XMLDiffMerge from IBM.
8/13/2019 Schematics Update User Bulletin
7/26
8/13/2019 Schematics Update User Bulletin
8/26
12/10/2010 8
2.2 Area Shapes
The new Area Shape function allows the assignment of attribute values to schematic items based
on their location in the diagram drawing. An area shape can for instance represent a room, a
package, a spec or any other entity.
By dropping a schematic item inside the border of the area, the attribute value associated with the
area shape will be applied to the schematic item. For example, the Location attribute of an
equipment item can receive a value of 202 when the item is dropped or moved into the area
representing room 202.
For More Information
See also User GuideAVEVA Diagrams / Working with Diagrams / Area Shape.
8/13/2019 Schematics Update User Bulletin
9/26
8/13/2019 Schematics Update User Bulletin
10/26
12/10/2010 10
2.4 Release Diagram Sheets to 3D and Performance ofthe SaveWork Command
A new function for releasing diagrams to 3D is now available. This function will allow users to
selectively create SVG viewer files and set release status for a diagram or sheet at a time.
Together with this function there is also a new option for Savework behaviour, whereby it is
possible to specify that SVG files should not be created on SaveWork and only by the Release
Diagram to 3D function. If this feature is enabled, then the performance of Savework can be
significantly improved, as the creation of SVG files may take some time to execute.
For More Information
See also User GuideAVEVA Diagrams / Working with Diagrams / File Handling / Save Work andSVG Creation.
8/13/2019 Schematics Update User Bulletin
11/26
8/13/2019 Schematics Update User Bulletin
12/26
12/10/2010 12
2.6 Save As with Copy of DB Data
In previous releases, the user would manually have to redefine the items on a diagram created by
the SaveAs function. A new possibility has now been introduced to get a copy of all related
database items when a diagram is created by the SaveAs function. An options dialogue provides apossibility to affect how some special cases will be handled.
For More Information
See also User GuideAVEVA Diagrams / Working with Diagrams / File Handling / Save As with
Copy of Data.
8/13/2019 Schematics Update User Bulletin
13/26
12/10/2010 13
2.7 Session defaults
A new Default Attributes feature has been introduced for assigning default values to items created
during the program session. Values will be set for any items where the chosen attribute is
applicable.
Also, the previously available Default Groups and Default System functions have been combined
together with Session Defaults into a common dialogue. This dialogue is available from the
Session Defaults panel in the status bar at the bottom right hand corner of the application window.
For More Information
See also User GuideAVEVA Diagrams / Getting Started / Making Settings for the Program
Session / Set Up Default Groups, Default System and Default Attributes.
8/13/2019 Schematics Update User Bulletin
14/26
12/10/2010 14
2.8 DWG File Export Enhancements
The DWG export function has been enhanced with a possibility to manage layers. Any layers
created in the Visio drawing will be preserved into the created DWG file. It is also possible to
configure the usage of ByLayer for colours, line widths and line patterns.
For More Information
See also User GuideAVEVA Diagrams / Utilities / DWG Export.
8/13/2019 Schematics Update User Bulletin
15/26
12/10/2010 15
2.9 New Excel Import / Export Function
A new Excel Import / Export function is available in Diagrams as well as Schematic Model
Manager. This function can be used for importing data from Excel files into a Schematic Model
database. It includes a possibility to configure element types and attribute mappings. Suchconfigurations can be named and saved for re-use at a later time. During import there is also
highlighting of changes with Accept / Reject options for each record or attribute.
For More Information
See also User GuideAVEVA Diagrams / Working with Diagrams / Importing and Exporting Data to
the DB.
8/13/2019 Schematics Update User Bulletin
16/26
12/10/2010 16
2.10 Export Consistency Check Result to File
A new feature has been added to allow the export of a consistency check result. After having done
a consistency check for a diagram, the user can right click and choose Export to. In the Save
As dialog it is possible to choose text file format or Excel file format.
For More Information
See also User GuideAVEVA Diagrams / Working with Diagrams / Main Gui Components /
Message Log and Working with Diagrams / Main Gui Components / Consistency Check.
8/13/2019 Schematics Update User Bulletin
17/26
12/10/2010 17
3. Schematic 3D Integrator
Here follows a list of new enhancements included in the 12.0.SP6 Schematics Update Release
release. For more information about these features, please refer to the Schematic 3D IntegratorUser Guide.
3.1 Line List Comparison
In addition to the existing capabilities for Schematic P&ID3D comparison, there is now also a
new possibility for line list comparison. In case the schematic model is loaded with line list data
rather than the full P&ID-based connectivity model, then this data can now be compared against
3D model data. This includes comparison of From/To line list attributes against 3D connectivity, as
well as comparison of other attribute values between lines and 3D pipes.
For More InformationSee also User GuideSchematic 3D Integrator / Integrator Controls / How to use the Bar
Menu / Line List Options.
8/13/2019 Schematics Update User Bulletin
18/26
12/10/2010 18
3.2 Comparison Colour Key
A colour key window for comparison colours is now available. This window shows an explanation
for the colours used for presenting differences in the 3D and Schematics views.
For More Information
See also User GuideSchematic 3D Integrator / Integrator Controls / How to use the Bar
Menu / Display.
8/13/2019 Schematics Update User Bulletin
19/26
12/10/2010 19
3.3 Print Compare Report and Export Compare Report toExcel
The integrator compare report can now be printed and exported to Excel. These functions operateson the list view found in the Details tab of the comparison report and allow the main results of
comparison to be printed or exported to a single Excel worksheet. This worksheet will show a side-
by-side match of objects and includes comparison status and comparison comment.
For More Information
See also User GuideSchematic 3D Integrator / How Integrator Compares Schematic and
3D Data / Example Compare Report.
8/13/2019 Schematics Update User Bulletin
20/26
12/10/2010 20
3.4 New Diagram Viewer
The SVG format diagram viewer included in Schematic 3D Integrator and Schematic Model
Manager has been replaced by a new viewer developed by AVEVA. This means that it is no longer
required to separately download and install the Adobe SVG viewer. In addition to not beingdependent on the Adobe viewer, the new viewer also provides an improved overlay of compare
colours and line graphics as well as a generally clearer view of diagram graphics.
For More Information
See also User GuideSchematic 3D Integrator / Integrator Controls / How to Use the
Diagram Viewer.
Ado be SVG viewer
AVEVA SVG viewer
8/13/2019 Schematics Update User Bulletin
21/26
12/10/2010 21
4. Schematic Model Manager
Here follows a list of new enhancements included in the 12.0.SP6 Schematics Update Release
release. For more information about these features, please refer to the Schematic Model Manager
User Guide.
4.1 New Excel Import / Export function
A new Excel Import / Export function is available in Schematic Model Manager as well as
Diagrams. This function can be used for importing data from Excel files into a Schematic Model
database. It includes a possibility to configure element types and attribute mappings. Such
configurations can be named and saved for re-use at a later time. During import there is also
highlighting of changes with Accept / Reject options for each record or attribute.
For More Information
See also User GuideDesign Common Functionality / Excel Import and Export.
8/13/2019 Schematics Update User Bulletin
22/26
12/10/2010 22
4.2 New Diagram Viewer
The SVG format diagram viewer included in Schematic Model Manager and Schematic 3D
Integrator has been replaced by a new viewer developed by AVEVA. This means that it is no
longer required to separately download and install the Adobe SVG viewer. In addition to not beingdependent on the Adobe viewer, the new viewer also provides a generally clearer view of diagram
graphics.
For More Information
See also User GuideSchematic Model Manager / Previewing Diagrams before Export
/Schematic Model Manager Diagram Viewer.
Ado be SVG viewer
AVEVA SVG viewer
8/13/2019 Schematics Update User Bulletin
23/26
12/10/2010 23
5. AVEVA Instrumentation Data Update Add-in
Here follows a list of new enhancements included in the 12.0.SP6 Schematics Update Release.
For more information about these features, please refer to the AVEVA Instrumentation DataUpdate Add-in User Guide.
5.1 Filtering Function
A filtering function has been added to the AVEVA Instrumentation Data Update Add-in. This
provides a way to pre-filter the data coming from AVEVA Instrumentation before displaying it in the
grid, and allows users to compare a subset of the entire AVEVA Instrumentation project against
Schematic Model data.
For More Information
See also User GuideInstrumentation Data Update / Compare and Update Data / Filter.
8/13/2019 Schematics Update User Bulletin
24/26
12/10/2010 24
5.2 Cable Data Interface
The Instrumentation Data Update Add-in can now also be used for transferring cable and
equipment data from AVEVA Instrumentation to the PDMS catalogue and to 3D cable design. In
addition to Diagrams and Schematic Model Manager, this Add-in can now also be hosted inParagon, in Design and in Outfitting Design, and is capable of accessing Cable and Equipment
data stored in AVEVA Instrumentation.
Please note that this functionality requires AVEVA Instrumentation 12.0.SP5 to be installed.
For More Information
See also User GuideInstrumentation Data Update / Compare and Update Data / Update
the Target Database / Update the Design Database.
8/13/2019 Schematics Update User Bulletin
25/26
12/10/2010 25
This page left blank intentionally
8/13/2019 Schematics Update User Bulletin
26/26
AVEVA Solutions Ltd., High Cross, Madingley Rd, Cambridge CB3 0HB, UK