Minigraph A2M 200
CODE NO. 3768 MINIGRAPH A2M 200
The Minigraph A2M 200 is the new manual foot operated frame assembly machine with a simplified design.
The technology applied for the mechanical components ensures the same heavy duty and reliability performances as all the other machine in the Alfamacchine range.
The A2M 200 is well suited for low levels of production, the hobby trade, beginners or areas where noise is a major concern.
The only manual machine which can join moulding up to 180mm wide, it offers a lot of advantages such as
1. Tilting bench,2. Front or rear operating mode,3. Minimum servicing,4. Easy to use and reduced weight.
The machine is delivered in an assembly kit box and is easily assembled in a few minutes for use.
Technical Specification
Moulding thickness 6 mm to 90 mm Moulding width Up to 180mm ( 7inch.) Type Pedestal Weight 38 Kgs. Dimension 380 X 600 X 1150 mm
Manual bench disk sander
Manual Bench disk sander, allows to recover perfectly cutting faults setting up the angle at 45 degrees.
It utilizes 30 cm (12") abrasive disks. The Disk Sander consistence of construction and its working easiness, are the safe-life for a
long term duration. Suitable in different working environments from handcraft to mass production.
Technical Specification
Working Angle 45°
Clamping type Mechanical
Movement Manual
Dimension body 500 x 700 x 80mm
Fly-wheel diameter 30 cm (12") in dia.
LOGAN
Logan Mount Cutter
HANDHELD MAT CUTTER 1100
Cut unique shapes and designs into matboard using the Logan Freestyle handheld mat cutter. It's easy to use with either your left or right hand, and is Logan's most affordable mat cutter. Follow traced designs by pushing or pulling the cutter. Available in red or silver.
LOGAN handheld mat cutter 1100
Use Logan 324 Blade
TEAM SYSTEM
Get it all once. This practical combo system includes a 40’’ / 1016 mm straight edge and a LOGAN HANDHELD MAT CUTTER for accurate, high quality mat cutting. Just mark your borders using the rule red straight edge, attach the cutting head, and cut from line to line. All models include a non -slip rubberized base, US or metric ruled straight edge, and a LOGAN HANDHELD MAT CUTTER. Can also be used with LOGAN GLASS CUTTER or Straight Cutter.LOGAN 40’’ with
LOGAN 2000 push style Handheld Mat Cutter
Use Logan 270 Blade
INTER MEDIATE
An economical, all purpose, 40’’/1016mm mat cutting system capable of cutting full 32’’ x 40’’ sheet of mat board. Includes parallel mat guide for setting border widths up to 4 1/4’’, 90° - degree squaring bar for true corners, straight cutting head. Designed for Artists, photographers, crafters
and framers. Includes creative matting instruction and five extra Blades.
LOGAN Intermediate 401 mat Cutter 40’’
Use Logan 270 Blade
LOGAN FRAMER'S EDGE MOUNT CUTTER
Heavy-duty construction, rich features, and an attractive look make the Framer’s Edge the preferred system for framers and serious artists. Handles high production mat as well as small projects. Teflon coated cutting bar provides smooth cutting and need no lubrication. Parallel mat guide slides smoothly in aluminum channels and enables quick, accurate border measurements up to 5 ¼" ‘’(133 mm ). Fully scaled 27’’ squaring arm hold mats perfectly square. Base is 3/4’’ durable composite board laminated surface, easy to clean laminate. Includes production stop, 10 extra blades, dual straight & bevel cutting heads, and fully illustrated mat cutting manual.
Bevel Cutting Head
‘’ Start ” and “ Stop ” indicator movable production stop lets you cut all sides without readjusting stops or marking mat.
Comfortable ergonomic handle
Straight Cutting Head
Automatic lock-down pin holds blade in cutting position
Comfortable ergonomic handle 3 position depth adjustment
LOGAN 655 Professional Mat Cutter (48"/122cm) Uses Logan M-269 blade
SIMPLEX MAT CUTTER
Provides the quality and ease of use of a professional mat cutter at a fraction of the price. Features include dual guide rail stops for fast production mat cutting, a 27" (68.6cm) squaring arm for easy material downsizing, parallel mat guide for setting border widths up to 5-1/2" (13.97cm), durable laminated surface, straight cutting head, and bevel cutting head. Also available in a 60" (152cm) model. Includes creative matting instructions and five extra blades.
LOGAN 750 (40"/101cm)
LOGAN 760 (60"/152cm)
Uses Logan 270 blade
LOGAN COMPACT MOUNT CUTTEC
Versatile, portable 32" (81cm) mat cutter provides affordable and professional results. Open ended guide rail allows bevel Cuts in mat boards of any size. Downsize Mat board up to 29-1/2" (74.93cm). Includes parallel mat guide for setting border widths from 3/4" (1.9cm) to 4-1/4" (10.8cm), safety lock to keep mat guide secure during cutting, spring loaded, serrated aluminum guide rail, five extra blades, and a fully illustrated matting instruction guide. Includes bevel and straight cutting heads.
LOGAN Compact Mount Cutter
Uses Logan 270 blade
BEVEL CUTTING HEAD
“Start" and “stop" indicator push style blade action retractable blade holder adjustable blade depth patented blade slot.
STRAIGHT CUTTING HEAD
3 blade settings (safety, matboard, Foamboard) Larger, ergonomic, comfortable handle "start" and "stop" indicator safety blade cover.
Fletcher Mutli material cutter 3100
Fletcher Multi Material Cutter can cut:
Glass up to 6mm (requires steel glass wheels set-02-120) Foam Board, Gator Board, Mount Board, Card Board up to 12mm (requires knife
blade set-05-004) MDF Board/ Hard Board up to 3mm (requires MDF/ Hard Board cutting wheels
set-05-715) Acrylic/ Plastic/ PVC sheets up to 6mm (requires plastic scoring blades-05-712/
plastic cutting clades 05-711) Aluminium Sheet up to 1mm (requires Aluminium cutting set-05-716) Vertical cutting capacity 63” (1.60mtr) to any width.
Features:
Wall mounted space saving.
Single hand operation of head. Glass and Plastic are broken out with single hand operation. Cut’s debris-free no secondary cutting. Cuts wide range of materials
F3100 unit comes with-
Pillar post for Mount Board/ Foam Board/ MDF/ Plastic & Glass. Mount Board/ Foam Board blades, Plastic blades, Steel 120º Glass wheel unit, MDF Cutting wheel set, Measuring stop.
Optional Heads
12-224 Aluminium Pillar post with wheels. 12-225 PVC cutting Pillar post 04-110 Site line laser assembly. 04-101 Optional Mount stand.
ACCESSORIES
CUTTING MATS
A range of top quality self-healing, cutting mats, available in two sizes. Made of a 3-ply Polypropylene construction, this, as well as offering a non-slip surface, will allow a blade to be run across it without causing permanent damage.
SIZE ( 24” x 35”) SIZE ( 40” x 60”)
VACU FOAM CODE NO. A2208
A thin grey foam, specially designed for use with Vacuum Presses.
PIERCING TOOL CODE NO. A2236
Used to perforate unpierced PVC heat seal films before laminating.A special roller with sharp spikes
HOT PRESS FILM DISPENSER
Hot Press Film Dispenser is designed to be fitted either on Hot Press Stand or can be mounted on wall. It can hold upto 6 rolls of any Films & Mounting tissues
HOT PRESS STAND
This is designed to install Hot Press machine on the stand safely. It has one drawer & a shelf where one can store art work & consumables.
HGP 260HGP 360
Wooden plaque
This imaginative process is less expensive & alternative to framing.
Wooden plaque is designed for laminating Photo Graphs, Prints, Posters, Drawings, Certificates...
Wooden Plaque offers a clean professional look and a wide range of possible surface finishes and textures.
It is ideal for high humidity environment Protects from moisture, heat & dirt, resist scratching, non reflective, safe-no glass. Special ultraviolet, inhibitor reduces fading, cleans easily with soap & water. Available in standard sizes. Colour available : Black colour available in stock.
Golden, Silver & Rosewood colour also available on request.
------------ Standard Wooden Plaque ------------
------------- Name Plate Plaque -------------
4” X 8.5”
10" X 10"
8" X 10" 8" X 11"
------------- Photo Plaque ------------- WOODEN PLAQUE
WOODEN PLAQUE WITHMETAL ROD
WOODEN PLAQUE WITH OUTMETAL ROD
Size Size
2” X 3” 10” X 15”
3” X 4” 12” X 15”
3.5” X 5” 12” X 16”
4” X 6” 12” X 17”
5” X 7” 12” X 18”
6” X 8” 12” X 24”
6” X 9” 12” X 30”
8” X 10” 12” X 36”
8” X 11”
8” X 12”
10” X 12”
NAME PLATE PLAQUE
Size
3” X 12”
4” X 12”
4” X 18”
PHOTO PLAQUE
Size Window IMAGE
4” X 8.5” Single
8” X 10” Single
8” X 11” Double
10” x 10” 4 Window