Screenshots January 27 SP-AMS

Laser

Menus

Menu 1, 2, 3

Menu 4 Laser On high m/z

Voltages For V mode (positive ion mode!!)

Analog/Digital Tab (laser off)

DIO5 =1, DIO6=0

Analog/Digital Tab Laser on

DIO5 =0, DIO6=0

Pumps Inlet Valve Closed

Lens P = 0

Back P = 0.78

Pumps Inlet Valve Open

Lens P = 1.28

Back P = 4.99

Heater and General Info

• HB V mode = 40.5 in the menu, 38 on readout

• Heater T Readout = 490C, 4.3V, 1.28A

• Filament emission = 1.25 mA

• Flow rate 1.35

TPS V menus(last saved after Bill retuned it)

120126_v_41.set_f3.set

120126_v_41.set_f3.set

Bitwise V

TD settings

Laser on - V

Laser off

Vmode m/z calibration

W mode first tuning

Jan 28, 6 pm – N winds, fullerenes from the power plant ?

Servo check