SECTION ONE
sealants & tapes
1
SEALA
NTS &
TAPES
sealants& tapes
NEUTRAL SILICONE
Sanitary Silicone One part, high modulus, long skin time neutral cure sanitary silicone sealant. Resists mildew even when exposed to prolonged hot and humid environments. Suitable for glass, ceramics, aluminium, masonry, stone, concrete, most metals and many plastics.Colours available: Clear, White, Almond. 300ml.
CODE
SCS2600
Silicone N-10Neutral, one-part moisture curing silicone. Designed for general purpose glazing and sealing applications. Weathering and UV resistance is excellent. It is unaffected by high and low temperature. Suitable for glass, ceramics, aluminium, GRP, granite, concrete, galvanised steel, and many plastics.Colours available: Clear, Black, White, Light Grey, Dark Grey, Aluminium Grey, Brown, Off White, Sandstone. 300ml.
CODE
SCS2700
Silicone NOne part, low modulus, fast cure, neutral cure silicone sealant. Forsealing and weather proofing all building, glazing, roofing, rainwaterand cladding joints. Recommended for use with Zincalume, Galvabond,Colourbond and Marviplate. Adheres to glass, aluminium, ceramics,masonry, concrete, stone, most metals and most painted and plasticsurfaces. Suitable for kitchen splashbacks, butt glazing.Colours available: Clear, Black, White, Aluminium Grey. 300ml.
CODE
SCS2500
2
Gla
zing
&Fa
bric
atio
n
SEA
LAN
TS &
TA
PES
NEUTRAL SILICONE
GEN10GEN10 is a one part, neutral cure silicone sealant. For sealing and weather proofing all building, glazing, roofing, rainwater and cladding joints. It is recommended for use with Zincalume, Galvabond, Colorbond and Marviplate. It is potable water approved. Adheres to glass, aluminium, ceramics, masonry, concrete, stone, most metals and most painted and plastic surfaces. Colours available: Clear, Black, White, Grey. 300ml.
CODE
GEN10
Plumbers SiliconeOne part premium quality neutral cure silicone sealant. Designed for plumbers & roofers for spouting, guttering, flashing, wall cladding and rainwater. Applications where long term reliability is required. Unaffected by high and low temperatures and its superior physical properties are retained after many years of exposure. Recommended for use with Zincalume, Galvabond, Colourbond and Marviplate. Potable water approval. Suitable for coated steel, aluminium, metal water tanks, metal lap joints, wall cladding, masonry ceramic tiles, cement roof tiles and air-conditioning units.Colours available: clear, grey. 300ml.
CODE
PMATE
Sealproof 2000Weatherproofing one part silicone sealant for use in most common weatherproofing applications on a wide variety of materials. A low modulus, long life, formed in place silicone rubber building joint and glazing sealant giving 50%± joint movement. Also used to seal assemblies of metals, masonry, concrete, coated surfaces, plastics, wood and other common construction materials. Colours available: Black, White & Grey. 300ml.
CODE
SCS2000
3
SEALA
NTS &
TAPES
sealants& tapes
Construction Silicone - Acetic cureOne part sealant widely used for new construction, remedial work and maintenance. No primer required on glass but may be required on other substrates. Proven performance, high strength and outstanding adhesion and long life.Colours available: Clear. 300ml.
CODE
SCS1200
OTHER SEALANTS & ADHESIVESGap-SealPaintable acrylic sealant - water washup. For sealing masonry, plasterboard,Door and wall cracks, cornice cracks, window and door cracks. Adheres toWood, concrete, brick, plasterboard & many other surfaces. Colours available: White. 300ml.
CODE
GE91A
Bond-FastConstruction adhesive, fast drying, high strength. Suitable for floor & wallpanels, wood, plasterboard & chip board, aluminium, iron and steel. Concrete, cement sheeting, masonry & many other substrates. 300ml.
CODE
BONDFAST
ACETIC SILICONE
Contractors Silicone - Acetic cureOne part silicone. For general purpose glazing and sealing applications. It is unaffected by high and low temperatures and its superior physical properties are retained after many years of exposure.Colours available: Clear, Black, White. 300ml.
CODE
SCS1000
Sanitary Silicone - Acetic cureSealant resists mildew even when exposed to prolonged hot and humid environments. The sealant does not provide or maintain a nutrient surface for fungus. This sealant effectively seals around bathtubs, shower stalls, wall fixtures, rimless sinks, kitchen and bathroom fixtures and may be used for ceramic tile grouting and spotting. For maintenance Sanitary Sealant may be used outdoors. Colours available: Clear, White. 300ml.
CODE
SCS1700
4
Gla
zing
&Fa
bric
atio
n
SEA
LAN
TS &
TA
PES
SILICONE - INDUSTRIAL GRADE
High Temperature Industrial Grade Adhesive SealantOne part, high temperature application, acetic cure industrial grade sealant. Cures to a flexible rubber when exposed to moisture in the air. Has excellent resistance to weathering, temperature extremes (-60°C to + 260°C, intermittently +315°C), moisture, vibration, ultra-voilet and many chemicals. Primeless adhesion to many metals including aluminium, stainless steel, glass. ceramics and many plastics. 300ml.Colours available: Red only.
CODE COLOUR
RTV106R RED
Neutral Cure Industrial Grade Adhesive SealantOne-component, silicone rubber that cures on exposure to atmospheric moisture at room temperature. Seals vertical joints bonding dissimilar materials such as metal to plastic and glass to aluminum electrical insulation of wires and terminals and formed-in-place gasketing. Primerless adhesion to many metals and plastics. Non-corrosive to aluminum and steel per MIL-A-46146A+. Lower odour cure than conventional silicone sealants. Retains elastomeric properties at temperatures of -60°C(-75°F) to 204°C (400°F) for long periods and to 260°C (500°F) for short periods. Excellent weatherability, ozone, and chemical resistance.
CODE COLOUR
RTV128 CLEAR
Acetic Cure Industrial Grade Adhesive SealantExtremely versatile. Cures to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Capability to cure at room temperature and ambient humidity. Low temperature flexibility, high temperature performance. excellent weatherability and ozone and chemical resistance. Retains elastomeric properties at temperatures of -60°C(-75°F) to 204°C (400°F) for long periods and to 260°C (500°F) for short periods. Excellent for gasketing and general industrial applications.
CODE COLOUR
RTV102 WHITE
RTV103 BLACK
RTV108 CLEAR
5
SEALA
NTS &
TAPES
sealants& tapes
Sika Boom FRSika Boom®-FR is a one part, high yield, fire rated, polyurethane foam.Sika Boom-FR can be used for filling gaps and voids. blocking out dust, noise and draft. Thermal installation of window and door frames.Thermal insulation of pipes. Joint fire rating can only be achieved when designed with respect to the fire report (please see report for various joint orientations). High yield, easy application suitable for application at lower temperatures (+5ºC) Fast curing, excellent thermal insulation. Age resistant, CFC/HFC free, resistant to temperatures ranging from -40ºC to +100ºC
CODE
SIKABOOMFR
Sika Boom APSika Boom-AP is a fast curing expanding foam. It can be used as a fixing and insulating foam. It can be used for filling gaps and voids, blocking out dust, noise and draft, installation of window and door frames, insulation of pipes. Can be used when held upside down. Suitable for use outside. Can be cut, sanded and painted. Has excellent adhesion to most substrates. Quick and easy gap filler. Reaches difficult access areas that need to be filled.
CODE
SIKABOOM
Sikaflex-11FCHigh strength polyurethane formula, provides a highly effective bonding and sealing product, which demonstrates excellent flexibility, long life and weather proofing qualities. Substrates must be clean, dry and free of oil, grease and loose particles. Badly adhering coatings and friable surfaces must be ground off and the joint to be blown out with oil free compressed air. Available in 310ml or 600ml.Colours available: Black, Beige, Grey and White.
CODE
SIKA11FC
Sikaflex-PROCures to a tough, durable, flexible consistency and will last much longer then silicone and acrylic sealants when used in harsh weather conditions. Badly adhering coatings and friable surfaces must be ground off and the joint to be blown out with oil free compressed air. 310ml.Colours available: Black, Grey, Beige, Off White, White, Pale Brown, Dark Grey, Dark Amber, Redwood, Brick Red and Sandstone. Available in 310ml or 600ml.
CODE
SIKAPRO
SIKA SEALANTS
6
Gla
zing
&Fa
bric
atio
n
SEA
LAN
TS &
TA
PES
Sikaflex-252Sikaflex-252 is a non-sag, 1 component polyurethane adhesive of stiff, paste-like consistency that cures on exposure to atmospheric moisture to form a durable elastomer. Sikaflex-252 exhibits excellent adhesive properties and a high degree of mechanical strength. Sikaflex-252 is suitable for structural joints that will be subjected to high dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminium (including anodized finishes). Colours black & white. 300ml.
CODE
SIKA252
Sikaflex-221High quality multi purpose, non-sag 1-C polyurethane sealant that cures on exposure to atmospheric humidity to form a durable elastomer. 1-C formulation elastic, low odour, resistant to ageing and weathering exposure, non-corrosive, can be overpainted, can be sanded, NSF-approved for incidental food contact. Bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength such as metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics. 300ml cartridge or 600ml sausage.Colours available: White, Grey or Black.
CODE
SIKA221
Sikasil SG-20 Structural Glazing SiliconeNeutral curing silicone adhesive, which combines mechanical strength with high elongation. It adheres to a wide range of substrates. Meets requirements of EOTA ETAG 002 (carries ETA), EN 13022, ASTM C 1184 Fire rated (EN 11925-2 / DIN 4102-B1) Outstanding UV and weathering resistance excellent adhesion to glass, metals, coated metals, plastics and wood, used for structural sealant glazing, bonding of solar modules and other high demanding industrial applications.300ml cartridge or 600ml sausage.
CODE COLOUR
SIKASG20 BLACK
SIKA SEALANTS
Sikaflex-227One component polyurethane sealant designed for automotive body repair and maintenance. Suitable for sealing, seam sealing, simple bonding and vibration and sound deadening in crash body repairs. Bonds to metals, painted and non painted plastics. Resistant to fresh water, aqueous cleaning solutions and mineral oils. Drip free, low odour and can be painted over. Colours available: Black & White.
CODE
SIKA227
7
SEALA
NTS &
TAPES
sealants& tapes
SIKA SEALANTS
Sikasil WS305CNNeutral curing silicone sealant with a high movement capability and excellent adhesion to a wide range of substrates. Can be used for weatherproofing and sealing applications where durability under severe conditions is required. Particularly suited as a weather seal for curtain walling and windows. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.Colours available: Black, White, Grey, Clear, Beige & Grey 300mL.Black only in 600mL.
CODE
SIKA305
SikabondHigh strength contact adhesive that will not slump on vertical surfaces. It can be used as a one way liquid adhesive or a two contact adhesive on a variety of building materials. Excellent adhesion to wall and floor panels, wood, plasterboard and chipboard, aluminium, iron, steel, concrete, cement sheeting (CFC) and masonry with fast drying time.
CODE
SIKABOND
Anchorfix 1Solvent and styrene free polyester based 2-component anchoring adhesive. Suitable to be used as an anchor adhesive for reinforced bar, threaded rod, anchor bolts and fastening systems. Fast curing (as low as 25 mins, hardens in 3-5 mins). Easy to apply using a standard cartridge gun. Consistent mixing through static nozzle. Excellent adhesion to concrete, natural stone, solid rock, hollow and solid masonry. Can be used close to concrete edges and for close anchor spacing.
CODE
SIKA1CTG
Sikasil COne part neutral curing silicone sealant suitable for indoor andoutdoor applications. Suitable for glazing and weatherproofing applications of glass, metals, painted surfaces, wood, acrylics, polycarbonates, ceramic tiles and for most sanitary applications. Provides primerless adhesion to a wide range of substrates. Long term resistance to fungus. Very good UV and weathering resistance, low odour, non corrosive, high elasticity and flexibility.Colours available: Black, White, Clear, Grey & Mid-grey 300mL.
CODE
SIKASILC
8
Gla
zing
&Fa
bric
atio
n
SEA
LAN
TS &
TA
PES
Backing RodAllows moisture & air access to the front & back of the joint allowing faster, uniform curing times. Gases can escape through the open cell rod preventing gas release into the sealant which causes bubbling.
Orange - Open CellOpen cell foam rod.
CODE DESCRIPTION
FBROR-10 OPEN CELL 10mm x 200M
FBROR-16 OPEN CELL 16mm x 150M
FBROR-22 OPEN CELL 22mm x 100M
FBROR-29 OPEN CELL 29mm x 60M
FBROR-38 OPEN CELL 38mm x 30M
FBROR-50 OPEN CELL 50mm x 20M
SikaBond® -TechGripHigh strength multipurpose polyurethane glue. Super strong bond. Sandable, paintable and stainable. 100% waterproof. Excellent adhesion to timbers, metals, glass, ceramics, rubber, concrete, cement, stone and styrene. Environmentally friendly. Great resistance against corrosion from solvents and chemicals.
CODE DESCRIPTION
418051 SikaBond®-TechGrip 125g
418052 SikaBond®-TechGrip 500g
White - Closed CellClosed cell foam rod used in applications where a joint filler is required. Typical applications include shop fronts and curtain wall construction. Can also be used for dust sealing, draught sealing, sealing skylights etc. Provides water proofing under 30% compression, is highly resistant to weathering, ultraviolet rays.
CODE DESCRIPTION
LITLON-06W CLOSED CELL 6mm x 250M
LITLON-10W CLOSED CELL 10mm x 150M
LITLON-25W CLOSED CELL 25mm x 50M
LITLON-13W50 CLOSED CELL 13mm x 50M
LITLON-15W50 CLOSED CELL 15mm x 50M
LITLON-20W50 CLOSED CELL 20mm x 50M
LITLON-30W50 CLOSED CELL 30mm x 50M
SIKA SEALANTS
9
SEALA
NTS &
TAPES
sealants& tapes
V1300 Mounting Tape
CODE DESCRIPTION
V1330 0.8mm x 61M
V1362 1.6mm x 61M
V13124 3.2mm x 30.5M
White polyurethane mounting tape, pressure sensitive acrylic adhesive both sides. All internal and external mounting. Absorbs vibration and mitigates effects of expansion and contraction. Suitable for mirror mounting in conjunction with silicone.
V2800 Mounting Tape
CODE DESCRIPTION
V2830 0.80mm x 61M
V2845 1.14mm x 61M
V2862 1.60mm x 61M
V2890H 2.3mm x 45.7M
V28120H 3.2mm x 15.2M
Energy dissipating closed cell polyurethane, high performance acrylic adhesive both sides. External mounting in automotive. Dissipates vibrations and distributes stresses. Internal & external mounting. Common uses: Colonial bars, dissimilar metals, metal to metal, glass to metal.
V2000 Mounting Tape
CODE DESCRIPTION
V2020 0.6mm x 61M
Black high density closed cell polyurethane, high performance acrylic adhesive both sides. All internal and external mounting. Vibration dampening. High shear strength and superior aging qualities. Die cut gasket.
FIRM
MED/FIRM
FIRM
MED/FIRM
EZA1000 - High Performance Acrylic Tape
CODE DESCRIPTION
EZA1062 1.5mm x 33M
EZA1090 2.3mm x 16.5M
Grey, high bond performance, double sided tape withstands heat & cold, wind loading. Faster to apply than silicone : ready to use, no mixing, no curing. Pre apply to framing and stiffeners in inventory. Clean, neat, no mess to clean up. Replaces mechanical fasteners & welded studs. EZ release liner protects the adhesive until you’re ready to use it. Long shelf life, 2.3mm suitable for aluminium cladding panels.
MINIMUM SLITTING WIDTH: 6mm
DOUBLE SIDED ADHESIVE TAPES
10
Gla
zing
&Fa
bric
atio
n
SEA
LAN
TS &
TA
PES
FIRM
DOUBLE SIDED ADHESIVE TAPES
V2200 Structural Glazing Tape
CODE DESCRIPTION
V2204 3.2mm x 15.2M
V2206 4.8mm x 15.2M
V2208 6.4mm x 15.2M
V2210 8mm x 7.6M
V2212 9.5mm x 7.6M
Black, semi-rigid open cell polyurethane spacer, PSA both sides. Vertical only structural applications.Density: 352kg.Note: Open cell allows for silicone curing, cannot be used as a seal against water & air.
V2100 Structural Glazing Tape
CODE DESCRIPTION
V2104 3.2mm x 15.2M
V2106 4.8mm x 15.2M
V2108 6.4mm x 15.2M
V2110 8mm x 7.6M
V2112 9.5mm x 7.6M
Dark grey/black high strength, rigid, open cell polyurethane spacer, pressure sensitive adhesive (PSA) both sides. (Also available in single sided application). Vertical and horizontal structural applications. Density: 497kg.Note: Open cell allows for silicone curing, cannot be used as a seal against water & air.
V990 Standard Glazing Tape
CODE DESCRIPTION
V992 1.6mm x 61M
V994 3.2mm x 30.5M
V996 4.8mm x 15.2M
V998 6.4mm x 15.2M
Black closed cell PVC, PSA both sides. Also available in white upon request. Interior and exterior glazing sealant. High movement residential and commercial glazing. Heating and ventilation systems. Vibration dampening. Die cut gaskets. Note: Not recommended for use in conjunction with silicone or structural window glazing systems.
MEDIUM
VERY FIRM
11
SEALA
NTS &
TAPES
sealants& tapes
V710
CODE DESCRIPTION
V712 1.6mm x 61M
V714 3.2mm x 30.5M
V716 4.8mm x 15.2M
V718 6.4mm x 15.2M
V7112 9.5mm x 7.6M
Soft, swirl-free grey closed cell PVC. Water seal, low-rise, residential glazing. Ideal for die cut gaskets and use with screws.
V760
CODE DESCRIPTION
V762 1.6mm x 61M
V764 3.2mm x 30.5M
V766 4.8mm x 15.2M
V768 6.4mm x 15.2M
Firm grey closed cell PVC. Critical water seals under extreme conditions, vibration dampening. Domestic/commercial window glazing tape. Die cut gaskets.
FIRM
V740
CODE DESCRIPTION
V742G/B 1.6mm x 61M GREY/BLACK
V744G/B 3.2mm x 30.5M GREY/BLACK
V746G/B 4.8mm x 15.2M GREY/BLACK
V748G/B 6.4mm x 15.2M GREY/BLACK
V7412G/B 9.5mm x 7.6M GREY/BLACK
V7416G/B 12.7mm x 7.6M GREY/BLACK
Medium black or grey closed cell PVC. Domestic window glazing tape, die cut gaskets and general sealing.
MEDIUM
MEDIUM
V730
CODE DESCRIPTION
V734 3.2mm x 30.5M
V736 4.8mm x 15.2M
V738 6.4mm x 15.2M
V7312 9.5mm x 7.6M
V7316 12.7mm x 7.6M
V7324 19.0mm x 4.6M
Soft grey closed cell PVC. Light, dust, air and water seal for irregular and flimsy substrates. Acoustic applications. Air conditioning or coldroom seals.
SOFT
PVC SINGLE SIDED ADHESIVE TAPES
12
Gla
zing
&Fa
bric
atio
n
SEA
LAN
TS &
TA
PES
V820
CODE DESCRIPTION
V824 3.2mm x 30.5M
V826 4.8mm x 15.2M
V828 6.4mm x 15.2M
V8212 9.5mm x 7.6M
V8216 12.7mm x 7.6M
V8224 19mm x 6.1M
V8229 22mm x 4M
Super soft black semi-closed cell PVC. Very irregular and flimsy substrates. Meets FMVS302 flammability standard. Ceiling & wall system, partitioning, dissimilar metals, 16mm non adhesive also available. Patio to frame back channel tape.
V780
CODE DESCRIPTION
V782 1.6mm x 61M
V784 3.2mm x 30.5M
V786 4.8mm x 15.2M
V788 6.4mm x 15.2M
V7812 9.5mm x 7.6M
Medium to firm black closed cell PVC excellent weathering properties. Critical water seals under extreme conditions. Automotive approved. Meets FMVS302 flammability standard. Air conditioning flange seals, acoustic partitions, dissimilar metals.
MEDIUM
V770
CODE DESCRIPTION
V774 3.2mm x 30.5M
V776 4.8mm x 15.2M
V778 6.4mm x 15.2M
V7712 9.5mm x 7.6M
V7716 12.7mm x 7.6M
Soft black closed cell PVC. Light, dust, air and water seal for irregular and flimsy substrates. Meets FMVS302 flammability standard. Ceiling & wall systems. Closed cell black air conditioner flange seals, acoustic partitions, dissimilar metals.
SOFT
VERY SOFT
V860
CODE DESCRIPTION
V862 1.6mm x 46M
V864 3.2mm x 22.8M
V866 4.8mm x 15.2M
V868 6.4mm x 15.2M
V8612 9.5mm x 7.6M
Firm/high density, black, closed cell. Critical water seals under extreme conditions. Vibration dampening. Die cut gaskets.
FIRM
PVC SINGLE SIDED ADHESIVE FOAM TAPES
13
SEALA
NTS &
TAPES
sealants& tapes
FS470 - Nitrile/Neoprene
CODE DESCRIPTION
FS471 1.6mm x 25M
FS473 3.0mm x 25.0M
FS476 6.0mm x 12.5M
FS479 9.0mm x 8M
FS4712 12.0mm x 6M
FS4716 16mm x 6M
Firm black closed blend of nitrile and neoprene. Water seal for extreme conditions. Switchboard closures with UL94 approval. High temperature critical closures. All closure applications requiring constant opening and closing. Automotive gaskets and seals. Insulation and weather stripping.
FS480 - Nitrile/Neoprene
CODE DESCRIPTION
FS483 3.0mm x 15M
FS486 6.0mm x 10M
FS489 9.0mm x 9M
FS4812 12.0mm x 7.5M
Medium hardness, black, closed cell blend of vinyl and nitrile and neoprene. General water seal and closure applications. Switchboard and thermal applications. Automotive gaskets and seals. Insulation and weather stripping.
CLOSURE TAPES
FIRM
FS630 - Ethylene propylene diene monomer (EPDM)
CODE DESCRIPTION
FS633 3mm x 15M
FS636 6mm x 10M
FS639 9mm x 10M
FS6312 12mm x 7.5M
Closed cell black. Water, air & dust seal for extreme conditions requiring higher temperature tolerance in closure applications, automotive gaskets and seals, insulation etc. Excellent shape retaining memory.Density: 80kg. Temperature tolerance: 120°C max.
FS640 - EPDM - Ethylene propylene diene monomer (EPDM)
CODE DESCRIPTION
FS643 3mm x 15M
FS646 6mm x 10M
FS649 9mm x 10M
FS6412 12mm x 7.5M
Closed cell black. Water, air & dust seal for extreme conditions requiring higher temperature tolerance with firmer, higher density tape in closure applications, automotive gaskets and seals, insulation etc. Excellent shape retaining memory. Density: 120kg. Temperature tolerance: 120°C max.
FIRM
MEDIUM
MEDIUM
14
Gla
zing
&Fa
bric
atio
n
SEA
LAN
TS &
TA
PES
PU600 - Xpand PUR Sealing Tape
CODE DESCRIPTION
PU6001 6-15 x 4.3M
PU6002 9-20 x 3.3M
PU6003 11-25 x 2.6M
PU6004 18-34 x 3.3M
PU626 26-42 x 2.6M
PUR sealing tape impregnated with a fire resistant polymeric dispersion. Specially designed for joints in buildings up to 328ft high, in accordance with DIN 18055.
BCF - Butyl Coated Foam Tape
CODE DESCRIPTION
BCF6 6mm x 17M
BCF8 8mm x 13M
BCF10 10mm x 11M
BCF12 12mm x 8M
Compressible PVC foam inner core with coating of high tack butyl. Conforms to corner radiusing and irregular contours. Resists cold without cracking, low moisture vapour transmission rate. Seals against water penetration. Easy release liner for clean application. Typical applications include appliance seals, automotive seals, commercial refrigeration, metal building, prefabricated construction, marine sealing, recreational vehicle window and roof seals, fixed modular windows and cabinet duct seals.
SS200A - Silicone Strip’N’Stick Sponge Tape
CODE DESCRIPTION
SS200A2 1.6mm x 9.1M
SS200A4 3.2mm x 9.1M
SS200A6 4.8mm x 4.6M
Orange/tan silicone sponge tape with acrylic adhesive on one side. Instant gasket, offering superior service life, excellent conformability and flexibility low compression set with high adhesion to various substrates. Excellent for low and high temperature resistance, gasketing, dampening and thermal insulation etc. Temperature range 200°C+.
SS512AF - Silicone Strip’N’Stick Foam Tape
CODE DESCRIPTION
SS512AF2 1.6mm x 9.1M
SS512AF4 3.2mm x 9.1M
SS512AF6 4.8mm x 4.6M
SS512AF8 6.4mm x 4.6M
SS512AF12 9.5mm x 4.6M
SS512AF16 12.7mm x 4.6M
Grey, modified cell, COHRlastic silicone fire blocking foam with a film supported acrylic adhesive to one side. Superior service life, low compression set, excellent conformability and flexibility, excellent for low and high temperature resistance, gasketing and dampening etc. Foam backing meets UL guide JMST2 file MH12835 gasket material. Temperature range 200°C+.
SPECIALTY TAPES
15
SEALA
NTS &
TAPES
sealants& tapes
APPLICATION GUIDESINGLE/DOUBLE SIDED MOUNTING TAPES
To ensure maximum adhesion of your product you must carry out the following steps.1. Always test all products under actual application conditions prior to commercial use.
2. Material should be stored at 21°C.3. Product must be applied at the application temperature recommended on the product data sheet. This should be a minimum of 20°C. If a temperature-controlled environment is not obtainable in cold weather, we recommend a hair dryer be used to warm the product
and the contact surface.4. For maximum adhesive performance, preparing the contact surface correctly is crucial.
Always prepare the contact surface by removing dirt, wax or moisture with a cleaning solvent. A typical cleaning solvent is a 50/50 isopropyl alcohol/water mixture. For added
adhesion, it may be necessary to seal and/or prime the contact surface with Saint Gobain’s Tite-R-Bond.
5. Peel a fraction of the liner from the tape and stick this to the surface. Continue to apply the tape to the first surface while pulling the liner back at the same time. When all tape is applied
firmly rub down with full pressure to ensure full adhesive to surface contact.6. Although bond strength is dependent on the substrate surface, application temperature
and dwell time, it is recommended that 24 hours dwell time at room temperature be allowed before loading.
DOUBLE SIDED FOAM TAPES5. Apply the tape to the first surface with the liner on, and then firmly rub down. Remove the liner just prior to bonding surfaces together and apply full pressure to ensure full adhesive to
surface contact.6. Although bond strength is dependent on the substrate surface, application temperature
and dwell time, it is recommended that 24 hours dwell time at room temperature be allowed before loading.
FOAM Sealant Pty Ltd distributes NORTON® foam tapes and mounting products.Do not hesitate to call us on (03) 9706 7784 if any assistance is required.
APPLICATION GUIDE
16
Gla
zing
&Fa
bric
atio
n
SEA
LAN
TS &
TA
PES
Green Glue - Noise Proof SealantUsed to seal gaps between drywall and floors as well as spaces around electrical boxes, light fixtures, or any spots in the wall where the drywall ends. Formulated to never dry out or crack, allowing for a lifetime of leak free walls. Can be mudded and painted over a few short hours after application.
CODE DESCRIPTION
GGSC-1 NOISEPROOFING SEALANT 828ML
Green Glue - Noise Proofing CompoundCan be used in walls, ceilings and floors to drastically dampen vibrations which reduces the amount of sound transferring from one side of the structure to the other. Green Glue always remains tacky and will not dry out and become rigid like conventional adhesives.
Green Glue is a viscoelastic damping compound that, when sandwiched between two layers of rigid material greatly reduces the amount of sound transmitted through walls or ceilings and reduces the amount fo noise generated from impacts on floors.
Green Glue has a low VOC (5G/L) that meets 100% of VOC regulations. 100% recycled packaging meaning near zero waste during production. No hazardous materials, does not promote mould and fire tested.
CODE DESCRIPTION
GGC-1 NOISEPROOFING COMPOUND 828ML
Green Glue tested on a 24” OC wood stud wall with fibreglass insulation in the cavities. The soundboard assembly was 2 layers of 5/8” drywall on each side with Green Glue Noiseproofing Compound sandwiched between
Green Glue compared to a drywall adhesive and silicone caulk, not typically used for sound control. Ridgid drywall adhesive can actually worsen the condition of the wall.
NOISE PROOFING
17
SEALA
NTS &
TAPES
sealants& tapes
Norton CST Tape V494
PHYSICAL PROPERTY TYPICAL VALUE TEST METHOD
FLAME SPREAD CLASSIFICATION 15 (CLASS I) ASTM E-84/UL723
SMOKE DEVELOPED CLASSIFICATION
10 (CLASS I) ASTM E-84/UL723
FIRE RATING OF WOODEN FLOOR SYSTEMS
NO NEGATIVE IMPACT ASTM E-119CAN/ULC S101
OXIDATION RESISTANCE PASSED (300 PSI @ 158°F DURING 96h
*APA 5.7.2.2
AIR PERMEABILITY @ 30% COMPRESSION
0 (IMPERMEABLE) *NTP-122
THERMAL CONDUCTIVITY (BTU (.in)/Sq. Ft. (hr) F)
.28 ASTM C-518
RECOMMENDED SERVICE TEMP. -29°C TO 71°C
RECOMMENDED APPLICATION TEMP 4°C TO 52°C
MAX IMPACT NOISE REDUCTION -10dB (STEEL) @ 1250Hz-8dB (WOOD) @ 1250Hz
ASTM E-989ASTM E-492
MAX AIRBORNE SOUND REDUCTION (THROUGH FLOORS)
-14dB (WOOD) @ 700Hz-19dB (STEEL) @ 125Hz
ASTM E-90
MAX AIRBORNE SOUND REDUCTION (THROUGH WALLS)
-16dB (WOOD) @ 500Hz-19dB (STEEL) @ 500Hz
ASTM E-90
* NTP - Norton Test Procedures
* APA - American Plywood Association
applicationSurfaces must be clean of dirt, water and ice. NORTON CST is used in place of sub-floor glue - do not use any additional glue. Structural code requirements: use ‘nail-only’ data when calculating joist spans (contrary to ‘glue-nailed’ floors, no span increase is permitted). Use ring-shanked nails or screws as mechanical fasteners. Do not peel off liner (top surface).
Standard Sizes Thickness: 3.2mmLength: 30.5MWidth: up to 1397mm
CODE
V494
Green Glue - Noise Proof ClipsA great way to isolate structural vibrations. Clips attach to the stud or joist. Hat channel clips to them, providing a place for drywall screws to anchor to. Clips can safely support up to 3 layers of 5/8” drywall.
CODE DESCRIPTION
GGWHISPERCLIP NOISEPROOFING CLIPS
NOISE PROOFING