September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
Government Interface & Corporate Outreach
September 2013
ASTM Virtual Officers Training Workshop
Anthony Quinn & Sarah Petre
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
U.S. Standards System
• Voluntary and led by the private sector • Requires cooperation among stakeholders
– Standards organizations– Industry, consumers, and users– Government representatives– Academia
• Meets stakeholders’ needs– Protect safety, health, and environment– Improve industry competitiveness– Facilitate global trade and market access
2
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
ASTM International
• About ASTM International– Non-governmental, not-for-profit and international organization
– Develops voluntary, consensus standards
– Provides certification programs on limited basis
– Does not provide accreditation services
• ASTM’s objectives– Promotes public health and safety, and the overall quality of life
– Contributes to the reliability of materials, products, systems and services
– Facilitates national, regional, and international commerce
3
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
WTO Principles for Standards
ASTM International principles:
– Transparency
– Openness
– Impartiality and consensus
– Effectiveness and relevance
– Coherence
– Consideration of developing
nations’ views and concerns
WTO principles:
– Transparency
– Openness
– Impartiality and consensus
– Effectiveness and relevance
– Coherence
– Consideration of developing
nations’ views and concerns
4
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
I. Government Interface
5
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
ASTM in Washington, DC
• Connects ASTM’s work and builds awareness among policymakers.
• Represents ASTM before Congress, Federal agencies, ANSI, other SDOs, and trade associations.
• Engages in legislative, regulatory, and trade matters.– Ensure proper recognition of ASTM standards in laws and regulations.
• Strengthens relationships with ASTM stakeholders, including private companies, embassy officials based in Washington, DC, industry associations, and international non-governmental organizations (NGOs)
6
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
U.S. Legal and Policy Framework• National Technology Transfer and Advancement Act
of 1995 (NTTAA)
– Requires federal government agencies to use standards
developed by voluntary consensus standards organization when
possible
– Encourages federal government agencies to participate in
standards development organizations
• OMB Circular No. A-119
– Reinforces goals of National Technology Transfer and
Advancement Act
– Discourages federal agencies from using government-unique
standards7
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
Other U.S. Laws of Interest
• Consumer Product Safety Improvement Act– 15,000 different types of consumer products
• Food and Drug Administration (FDA) Modernization Act of 1997– Food safety, drugs, and cosmetic products
• Occupational Safety and Health Act of 1970– Workplace safety and health
8
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
U.S. Government Use of Voluntary Consensus Standards
• All ASTM standards are voluntary unless they are used by the federal
government in the following ways:
– Procurement and Contracts with the Federal Government• Standards are furnished to ensure that materials and services are obtained in an effective manner and in compliance with the
provisions of applicable Federal statutes and executive orders
– Regulation that incorporates standard by reference• An agency may adopt a voluntary standard (without changes) by incorporating the standard in a regulation by listing (or
referencing) the standard by title.• This approach eliminates the cost to the agency of creating a new standard
– Regulation based on existing standard• An agency reviews an existing standard and makes changes to match its goal or need.
• Agency conducts rulemaking process to solicit public opinion and stakeholder input
– Statute references standard
9
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
Federal Agencies & ASTM Standards
• U.S. Federal Register– Provides public notification of standards adoptions
and instructions for public comments
• U.S. Code of Federal Regulations (CFR)
– Over 10,000 references to voluntary consensus
standards in federal law
– Over 2,250 references to ASTM standards listed in
CFR for regulations and procurement
10
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
Top 10 Regulatory SDOs in US
11 Source: http://standards.gov
Standards Developing Organization Acronym Number
American Society for Testing and Materials ASTM 2254
American National Standards Institute ANSI 573
American Society of Mechanical Engineers ASME 555
U.S. Environmental Protection Agency EPA 472
Society of Automotive Engineers SAE 436
National Fire Protection Association NFPA 420
International Maritime Organization IMO 316
American Petroleum Institute API 280
Insulated Cable Engineers Association ICEA 274
AOAC International AOAC 246
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
Benefits to the U.S. Government
• Eliminate/reduce costs of developing standards
• Decrease costs of good purchased – Commercial off the shelf procurement
• Promotes efficiency and economic competition
• Relies on the private sector to meet needs– Access to industry experts and technology– Process is faster and more dynamic
12
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
U.S. Government Participation in ASTM
• U.S. Government is a partner and key stakeholder– Active U.S. Government participation in 93% of ASTM committees
– Broad range of federal agencies represented on ASTM committees
– Over 1400 representatives from the U.S. Government participate in ASTM committees
13
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
U.S. Government Participation in ASTM
14
U.S. Federal Agency
ASTM Members
Agriculture 17
Commerce (incl. NIST) 190
CPSC 39
Defense 308
Energy 135
EPA 108
FAA 12
HHS (incl. FDA) 136
HUD 4
U.S. Federal Agency
ASTM Members
Interior 27
Justice 21
NASA 52
NRC 16
OSHA 13
Transportation 90
Treasury 13
VA 12
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
Facts and Challenges•Standards are not always a top priority
– Constant educational process •Agencies must use lengthy rulemaking process to update or revise references•Roles and attitudes vary across federal agencies •At the U.S. state-level, no NTTAA-like policy exists
ASTM Strategy•Communicate •Understand agency needs, concerns and goals, and how ASTM fits into their agenda•Seek advice from agency reps and other committees•No one size-fits-all approach
– Be flexible to meet the needs of agencies
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
ASTM Initiatives with U.S. Government
• Educate about the U.S. system standardization, current relevant policies, and the value of ASTM standards
• Ensure proper reference to current ASTM standards– Regular review of the Code of Federal Regulations and Congressional
Record
– Coordinate technical committee communications to policymakers
• Understand agencies’ procurement and regulatory standards needs– Review of Regulatory Plan and Agenda
– Encourage government liaison with and participation in committee activities
16
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
17
II. Corporate Outreach
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
ASTM Objective
• “Promote a greater corporate awareness regarding the importance of standards and the
value of ASTM.” – ASTM 2006 objectives approved by the Board.
18
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
Challenges
• Executives lack standards knowledge
– Casual knowledge of international standardization
– View it as technical issue instead of trade barrier
• Preconceived notions and misinformation
– Confusion about what makes an ‘international
standard’
• Often make quick standards decisions
– Easiest or cheapest rather than strategic
19
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
ASTM Engages Decision-makers
• Raise awareness of standards and ASTM • Identify opportunities for collaboration on policy (regulatory
and trade) issues of mutual interest
• Seek industry feedback on activities and challenges– including the removal of global barriers to the acceptance and use of ASTM
standards
• Ensure ASTM is meeting stakeholder needs– ASTM Board and Staff completed meetings with industry, trade associations,
consumer groups, and other stakeholders around the world• Washington, Stockholm, New York City, Moscow, Mexico City, Brussels,
Beijing, London, Tokyo
20
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
Benefits to Industry
• Minimize safety hazards • Manage liability while reducing risk• Satisfy regulations and laws • Facilitate global trade• Reduce internal company specifications
21
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
ASTM Standards Impact the Global Economy
• Standards facilitate trade and boost GDP • The U.S. Commerce Department estimates that standards-related
issues impacted 80% of world commodity trade.
• ASTM standards impact the global economy• 7,000 ASTM standards are used in regulation or adopted as national
standards around the world.
22
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
Helping Industry Meet Global Challenges
• ASTM’s MOUs with 80 developing countries and 3 with regional bodies
– MOUs facilitate the use of ASTM standards directly into the national portfolios and technical regulations
• ASTM standards open doors and open markets
– The ability to export products made and tested to ASTM standards
23
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
III. Questions and Discussion
24
September 2013ASTM Officers Training WorkshopSeptember 2013ASTM Officers Training Workshop
Contact Information Anthony Quinn
Director, International Trade and Public Policy [email protected], 202 223-8484
Sarah Petre Manager, Federal and Industry Affairs
[email protected], 202-223-8399
1850 M Street, NW, Suite 1030Washington, DC 20036 USA
25