Mortice locksfor timber doors
Series 300 / 200
DORMA
Mortice locks
2
Contents
Page
Mortice locks 300/200Benefits / Features 3
Mortice locks 300/200Classification EN 12209 / Lock details 4
Mortice locks 300/200Handing 5
Mortice locks 300/200Application 5
Mortice locks 300/200Summary 6
Mortice locks 300 CE Premier 8
Mortice locks 300 Project 16
Mortice locks 200 CE Contract 20
Mortice locks 200 Standard 25
Strike plates 36
DORMA locks Compatibility 37
Specification text 300 CE, 300, 200 CE, 200 38/39
Figure: DORMA lock series 300 DORMA lever handle PREMIUM 8906
3
DORMA locks offer the very highest standard of quality and functional reliability.With the use of high-grade materials, precise production techniques and a compre-hensive quality management
system, all DORMA locks meet demanding technical specifications. Additionally, locks conforming to the technical requirements of DIN 18251 and EN 12209 also offer unbeatable ease of use and security features.
Locks from DORMA are also offered as a set. The package contains the Mortice lock with screws and strike plate.
Further information, specification textsAdditional information, e.g. specification texts, drawings, and installation instructions on many products, can be accessed via electronic media (Internet).
DORMA Mortice locks for timber doors – a complete range of high quality products
For the architect3 The high quality satin
stainless steel surface finish satisfies very high demands with respect to the appearance of the door furniture.
For the trade3 The package contains the
Mortice lock with screws and strike plate
3 Non-handed lock version to reduce storage space
3 Identical fixing screws for lock and strike plate simplify material manage-ment
3 Having been assigned category of use grade 2 and 3 per EN 12209 the
locks can also be reliably installed in buildings sub-ject to heavy pedestrian traffic frequencies
3 Optimated processes because DORMA locks and fittings are from one hand
3 Not provided for fire-rated doors in Germany
3 All the DORMA Mortice locks have following variations:
backset 55 mm 60 mm 65 mm 70 mm 80 mm forend 20 mm, square 20 mm, rounded 24 mm, square 24 mm, rounded
For the installer 3 DORMA locks offer their
precision by a simple, compatible assembling in standard door cuts.
3 DORMA locks have consis-tently uniform sizes each and are interchangeable, also between each series.
3 DORMA locks can be used universally by changing the latch handing, without using a tool.
3 DORMA locks achieve a long life because of a robust maintenance-free lock mechanism, even under difficult operating conditions.
3 DORMA locks can be commonly used with stan-dard fittings, e.g. standard lever handles, profile cylinders, roses/escut-cheons/backplastes etc.
3 DORMA locks are subject to strict quality require-ments and are tested and certified according to EN 12209. For applica-tions with increased security requirements the locks are tested and certi-fied in accordance with national and international standards.
Grade EN 12209 3 3 2 2
CE x – x –
DIN 18251-1 x x x x
Door Application for: Public Public Office Office
Latch handing Reversible Reversible Reversible Reversible
Latch Satin stainless Satin stainless Satin stainless Solid metal steel steel steel nickel plated
Follower 8 mm Clamp Clamp Standard Standard
Follower bearing Steel bushes Steel bushes Formed Formed
Dead bolt Satin stainless Satin stainless Satin stainless Solid metal steel steel steel nickel plated
Anti-saw protection x x – –
Anti-picking shield x x – –
Fixing holes Bushed Bushed Unbushed Unbushed
Forend Screwed Screwed Screwed Screwed
Forend SSS AISI 316 AISI 316 AISI 304 AISI 304
Features 300 CE 300 200 CE 200 Premier Project Contract Standard
Benefits at a glance
x yes – no
DORMA
Mortice locks
4
Category of use e.g. office doors
Key identification no requirement
Example Classification code to EN 12209 for the 271 lock
Durability 200.000 cycl./50 N load on latch bolt
Door Mass above 200 kg, closing force 25 N
Fire / smoke doors not approved
Safety no requirements
Corrosion resisistance very high resistance, NSS 120 h, –20 °C to + 80 °C
Type of spindle operation for unsprung lever handle
Key operation and locking Cylinder manually with intermediate
Door application Hinged door
Security-drill resistance medium no drill resistance
Mortice locks 271
Latch
Deadbolt
Backset
WCPZ
Cent
er t
o ce
nter
dis
tanc
ec/
c
Follower
Clamp Standard
Lockcase
Strike plate
Forend
Lock details
Category of use e.g. doors in public buildings
Key identification no requirement
Example Classification code to EN 12209 for the 381 CE lock
Durability 200.000 cycl./120 N load on latch bolt
Door Mass above 200 kg, closing force 25 N
Fire / smoke doors approved
Safety no requirements
Corrosion resisistance very high resistance, NSS 120 h, –20 °C to + 80 °C
Type of spindle operation for unsprung lever handle
Key operation and locking Cylinder manually with intermediate
Door application Hinged door supported
Security-drill resistance medium no drill resistance
Mortice locks 381
2 S 8 0 0 G 3 B C 2 0
3 X 8 1 0 G 4 H C 2 0
5
Handing data for entrance door sets
Outside
Inside
Outside
Inside
RH door LH door
Outside Outside
Inside Inside
LH door RH door
A B
C D
Application with DORMA Beschlagtechnik lever handles
DORMA locks are prepared to be used with the DORMA Beschlagtechnik Premium, Plus and Pure ranges.
CR EA TE
Giving shape to an idea. Please do not hesitate to contact us.
Premium for Projects with high demands on function and design
Plus for functional doors
Pure for standard doors
With sleeves
black painted
clamp followerin stainlesssteel
anti-saw pinsanti-picking shield
stainlesssteel316
DORMA
Mortice locks
6
Series 300/300 CE
Latch type standard x x – x
Latch retractable by handle x x – x
by cylinder x – – –
Dead bolt double throw 20 mm x – x –
single throw 10 mm – x – –
Dead bolt operable by cylinder EPC x – x –
by thumbturn – x – –
Centers 72 mm x – x x
78 mm – x – –
Backset 55–80 55–80 55–80 55–80
Forend 20 mm rounded / square x / x x / x x / x x / x
24 mm rounded / square x / x x / x x / x x / x
More information on page: 16 17 18 19
PROJECT series 300 371 375 378 379
Latch type standard x x – x antithrust antithrust classroom x
Latch retractable by handle x x – x x x x x
by cylinder x – – – x – – x
Dead bolt double throw 20 mm x – x – x – – x
single throw 10 mm – x – – – – – –
Dead bolt operable by cylinder EPC x – x – x – – x
by thumbturn – x – – – – – –
Centers 72 mm x – x x x x x –
78 mm – x – – – – – –
85 mm – – – – – – – x
Backset 55–80 55–80 55–80 55–80 55–80 55–80 55–60 45
Forend 20 mm rounded / square x / x x / x x / x x / x x / x x / x x / x x / x
24 mm rounded / square x / x x / x x / x x / x x / x x / x x / x x / x
More information on page: 8 9 10 11 12 13 14 15
PREMIER series 300 CE 381 385 388 389 391 392 393 394
black painted
stainlesssteel316
anti-saw pins
clamp followerin stainlesssteel
anti-picking shield
391, 392, 393, 394
x yes – no
stainless steel 304
Zinc plated
stainlesssteel304
7
Latch type standard x x – x x
Latch retractable by handle x x – x x
by cylinder x – – – x
Dead bolt double throw 20 mm x – x – –
single throw 10 mm – x – – –
Dead bolt operable by cylinder EPC x – x – –
by thumbturn – x – – –
Centers 72 mm x – x x x
78 mm – x – – –
Backset 55–80 55–80 55–80 55–80 55–80
Forend 20 mm rounded / square x / x x / x x / x x / x x / x
24 mm rounded / square x / x x / x x / x x / x x / x
More information on page: 20 21 22 23 24
CONTRACT series 200 CE 281 285 288 289 290
Latch type standard x x – x – x roller – x x
Latch retractable by handle x x – x – x – – x x
by cylinder x – – – – – – – – –
Dead bolt double throw 20 mm x – x – x – x – – –
single throw 10 mm – x – – – – – x – x
Dead bolt operable by cylinder EPC x – x – x – x – –
by thumbturn – x – – – – – x – x
Centers 72 mm x – x x – – x – x x
78 mm – x – – – – – x – –
85 mm – – – – – – – – – –
Backset 55–80 55–80 55–80 55–80 55 55 55–80 55–80 55–80 55–80
Forend 20 mm rounded / square x / x x / x x / x x / x x / x x / x x / – x / x x / x x / x
24 mm rounded / square x / x x / x x / x x / x x / x x / x – / x x / x x / x x / x
More information on page: 25 26 27 28 29 30 31 32 33 34
STANDARD series 200 271 275 278 279 208 209 232 233 234 235
Series 200 CE
lockable follower
Zinc plated
stainless steel 304
steelnickelplated
Series 200
x yes – no
8
DORMA
Mortice locks PREMIER
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
X
98
3112
.536
.535
235
12
20
3
15
3516
5
6372
8
4621
.5
38
38
209
13
Y
12.5
8
Mortice lock 381
Locks for interior and exterior doors, e.g. in public buildings
Features
Grade 3 – EN 12209,approved for fire-rated doors with CE certificate– Lock case size DIN 18251-1, closed case with sleeves,
zinc plated,black painted– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– latch handing is reversible– latch and dead bolt, stainless steel, satin– Security dead bolt with hardened anti-saw pins,
anti-picking shield– clamp follower, stainless steel, 8 mm square hole,
with separate bush bearing– centred forend, satin stainless steel 1.4401 / AISI 316
Recommended Strike plate: 20 side: non-handed
3 X 8 1 0 G 4 H C 2 0
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
9
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
X
98
3112
.536
.535
235
12
10
3
15
3516
5
6378
4621
.5
38
38
209
13
Y
12.5
8
Mortice lock 385
Locks for bathroom doors, e.g. in public buildings
Features
Grade 3 – EN 12209,approved for fire-rated doors with CE certificate– Lock case size DIN 18251-1, closed case with sleeves,
zinc plated,black painted– lock case prepared for thumbturn
and standard fittings– latch handing is reversible– latch and dead bolt, stainless steel, satin– Security dead bolt with hardened anti-saw pins,
anti-picking shield– clamp follower, stainless steel, 8 mm square hole,
with separate bush bearing and 8 mm bathroom follower– centred forend, satin stainless steel 1.4401 / AISI 316
Recommended Strike plate: 20 side: non-handed
3 X 8 1 0 G 4 H G 2 0
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
10
DORMA
Mortice locks PREMIER
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
X
98
36
.5
23
5
35
38
38
35
63
72
8
16
5
20
9
46
21
.5
3
15
8
Y
13
20
Mortice lock 388
Locks for interior and exterior doors, e.g. in public buildings
Features
Grade 3 – EN 12209,approved for fire-rated doors with CE certificate– Lock case size DIN 18251-1, closed case with sleeves,
zinc plated,black painted– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– dead bolt, stainless steel, satin– Security dead bolt with hardened anti-saw pins,
anti-picking shield– centred forend, satin stainless steel 1.4401 / AISI 316
Recommended Strike plate: 21 side: non-handed
3 X 8 1 0 G 4 H C 2 0
Classification EN 12209
11
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
X
98
3112
.5
235
12
3
15
3516
5
6372
8
4621
.5
38
38
209
13
Y
12.5
Mortice lock 389
Locks for interior and exterior doors, e.g. in public buildings
Features
Grade 3 – EN 12209,approved for fire-rated doors with CE certificate– Lock case size DIN 18251-1, closed case with sleeves,
zinc plated,black painted– lock case prepared for standard fittings– latch handing is reversible– latch, stainless steel, satin– clamp follower, stainless steel, 8 mm square hole,
with separate bush bearing– centred forend, satin stainless steel 1.4401 / AISI 316
Recommended Strike plate: 23 side: non-handed
3 X 8 1 0 G 4 H 0 2 0
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
12
DORMA
Mortice locks PREMIER
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Xsquare 20 mm 24 mmrounded 20 mm 24 mm
3
8
23
5
13
13
8
Y
12
20
38 38
49
32
52
23
5
72
30X
8
16
521
,54
61
71
5,5
– 0
,5
12
10
35
3
Mortice lock 391
Locks for interior and exterior doors, e.g. in public buildings
Features
Grade 3 – EN 12209 approved for fire-rated doors with CE certificate– Lock case size DIN 18251-1, closed case, zinc plated,
black painted– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– latch handing is reversible– anti-thrust latch, with snib– latch and dead bolt, stainless steel, satin– Security dead bolt with hardened anti-saw pins,
anti-picking shield– follower, stainless steel, 8 mm square hole,
mounted in drawn steel bushes– centred forend, satin stainless steel 1.4401 / AISI 316
Recommended Strike plate: 20 side: non-handed
3 S 8 1 0 G 3 H C 2 0
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
13
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
3
8
23
5
13
13
Y
12
38
32
52
23
5
72
30X
8
16
521
,54
61
71
5,5
– 0
,5
12
10
35
3
Mortice lock 392
Locks for interior and exterior doors, e.g. in project buildings
Features
Grade 3 – EN 12209 approved for fire-rated doors with CE certificate– Lock case size DIN 18251-1, closed case, zinc plated,
black painted– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– latch handing is reversible– anti-trust latch with snib– latch, stainless steel, satin– follower, stainless steel, 8 mm square hole,
mounted in drawn steel bushes– centred forend, satin stainless steel 1.4401 / AISI 316
Recommended Strike plate: 23 side: non-handed
3 S 8 1 0 G 3 H 0 2 0
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
14
Possible variation
Backset: X 55 mm 60 mm
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
3
8
23
5
13
13
Y
12
38
32
52
23
5
72
30X
8
16
521
,54
61
71
5,5
– 0
,5
12
10
35
3
Mortice lock 393
Locks for classroom doors
Features
Grade 3 – EN 12209 approved for fire-rated doors with CE certificate– Lock case size DIN 18251-1, closed case, zinc plated,
black painted– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– latch handing is reversible– anti-trust latch with snib– latch, stainless steel, satin– Split follower, stainless steel, 8 mm square hole,
mounted in drawn steel bushes, outside follower, lockable by cylinder
– centred forend, satin stainless steel 1.4401 / AISI 316– delivered with split spindle (8 x 110 mm)
Recommended Strike plate: 23 side: non-handed
3 S 8 1 0 G 3 H 0 2 0
Classification EN 12209
DORMA
Mortice locks PREMIER
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
15
Possible variation
Backset: X 45 mm
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
Mortice lock 394
Locks for interior and exterior doors, e.g. in public buildings
Features
Grade 3 – EN 12209 approved for fire-rated doors with CE certificate– Lock case size DIN 18251-1, closed case, zinc plated,
black painted– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– latch handing is reversible– latch and dead bolt, stainless steel, satin– follower, stainless steel, 8 mm square hole,
mounted in drawn steel bushes– centred forend, satin stainless steel 1.4401 / AISI 316
Recommended Strike plate: 20 side: non-handed
12
20
35 38
62
27
52
24
0
85
30X
8
17
0
24
0
21
,54
69
15
8
Y
12
15
15
,5 –
0,5
35
3
3 X 8 1 0 G 3 H C 2 0
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
16
DORMA
Mortice locks PROJECT
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
Mortice lock 371
Locks for interior and exterior doors, e.g. in public buildings
Features
Grade 3 – EN 12209– Lock case size DIN 18251-1, closed case with sleeves,
zinc plated,black painted– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– latch handing is reversible– latch and dead bolt, stainless steel, satin– Security dead bolt with hardened anti-saw pins,
anti-picking shield– clamp follower, stainless steel, 8 mm square hole,
with separate bush bearing– centred forend, satin stainless steel 1.4401 / AISI 316
Recommended Strike plate: 20 side: non-handed
3 X 8 0 0 G 4 H C 2 0
X
98
3112
.536
.535
235
12
20
3
15
3516
5
6372
8
4621
.5
38
38
209
13
Y
12.5
8
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
17
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
Mortice lock 375
Locks for bathroom doors, e.g. in public buildings
Features
Grade 3 – EN 12209– Lock case size DIN 18251-1, closed case with sleeves,
zinc plated,black painted– lock case prepared for thumbturn
and standard fittings– latch handing is reversible– latch and dead bolt, stainless steel, satin– Security dead bolt with hardened anti-saw pins,
anti-picking shield– clamp follower, stainless steel, 8 mm square hole,
with separate bush bearing, and 8 mm bathroom follower– centred forend, satin stainless steel 1.4401 / AISI 316
Recommended Strike plate: 20 side: non-handed
3 X 8 0 0 G 4 H G 2 0
X
98
3112
.536
.535
235
12
10
3
15
3516
5
6378
4621
.5
38
38
209
13
Y
12.5
8
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
1818
DORMA
Mortice locks PROJECT
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
Mortice lock 378
Locks for interior and exterior doors, e.g. in public buildings
Features
Grade 3 – EN 12209– Lock case size DIN 18251-1, closed case with sleeves,
zinc plated,black painted– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– dead bolt, stainless steel, satin– Security dead bolt with hardened anti-saw pins,
anti-picking shield– centred forend, satin stainless steel 1.4401 / AISI 316
Recommended Strike plate: 21 side: non-handed
3 X 8 0 0 G 4 H C 0 0
X
98
36
.5
23
5
35
38
38
35
63
72
8
16
5
20
9
46
21
.5
3
15
8
Y
13
20
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
1919
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
Mortice lock 379
Locks for interior and exterior doors, e.g. in public buildings
Features
Grade 2 – EN 12209– Lock case size DIN 18251-1, closed case with sleeves,
zinc plated,black painted– lock case prepared for standard fittings– latch handing is reversible– latch, stainless steel, satin– clamp follower, stainless steel, 8 mm square hole,
mounted in drawn steel bushes– centred forend, satin stainless steel 1.4401 / AISI 316,
changeable
Recommended Strike plate: 23 side: non-handed
3 X 8 0 0 G 4 H 0 2 0
X
98
3112
.5
235
12
3
15
3516
5
6372
8
4621
.5
38
38
209
13
Y
12.5
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
2020
DORMA
300 CE / 300
300 CE 300
Category of use Grade EN 12209 3 3
CE x -
Lock case size DIN 18251-1 x x
Door application for Public Public
Latch handing Reversible Reversible
Latch Satin stainless steel Solid metal nickel plated
Follower, 8mm Clamp Clamp
Follower bearing with seperate bush bearing with seperate bush bearing
Dead bolt Satin stainless steel Solid metal nickel plated
Dead bolt operable by Cylinder EPC x x
by thumbturn x x
Anti-saw protection x x
Anti-picking shield x x
Fixing holes Bushed Bushed
Forend Screwed Screwed
Forend SSS AISI 316 AISI 316
x The high quality satin stainless steel surface finish satisfies very high demands with respect to the appearance of the door furniture.
x The package contains the Mortice lock with screws and strike plate
x Non-handed lock version to reduce storage space
x Identical fixing screws for lock and strike plate sim-plify material management
x Having been assigned category of use grade 3 per EN 12209 the locks can also be reliably instal-led in buildings subject to heavy pedestrian traffic frequencies
x Anti-saw protection and anti-picking shield increase the security demands
x All the DORMA Morticelocks have following variations:
backset 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
forend 20 mm, square 20 mm, rounded 24 mm, square 24 mm, rounded
x DORMA locks achieve a long life because of a robust maintenance-free lock mechanism, even under difficult operating conditions.
x DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
Highlights of the 300 series
x yes – no
2121
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
23
5
13
13
8
12
Y
12
20
38 38
49
32
52
23
5
72
30X
8
16
53
5
21
,54
61
71
5,5
– 0
,5
3
Mortice lock 281
Locks for interior and exterior doors, e.g. in office buildings
Features
Grade 2 – EN 12209 approved for fire-rated doors with CE certificate– Lock case size DIN 18251-1, closed case, zinc plated– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– latch handing is reversible– latch and dead bolt, stainless steel, satin– follower, stainless steel, 8 mm square hole,
mounted in drawn steel bushes– centred forend, satin stainless steel 1.4301 / AISI 304
Recommended Strike plate: 20 side: non-handed
2 S 8 1 0 G 3 H C 2 0
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
DORMA
Mortice locks CONTRACT
2222
DORMA
Mortice locks CONTRACT
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
12
10
38
49
32
52
23
5
15
,5 –
0,5
X 30
78
16
521
,54
61
7
35
23
5
13
13
8
12
Y
3
38
Mortice lock 285
Locks for bathroom doors, e.g. in office buildings
Features
Grade 2 – EN 12209 approved for fire-rated doors with CE certificate– Lock case size DIN 18251-1, closed case, zinc plated– lock case prepared for thumbturn
and standard fittings– latch handing is reversible– latch and dead bolt, stainless steel, satin– follower, stainless steel, 8 mm square hole,
mounted in drawn steel bushes and 8 mm bathroom follower
– centred forend, satin stainless steel 1.4301 / AISI 304
Recommended Strike plate: 20 side: non-handed
2 S 8 1 0 G 3 H G 2 0
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
2323
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
20
38 38
13
3
23
5
72
30X
8
16
5
23
5
21
,54
61
7
13
8
Y
13
15
,5 –
0,5
35
3
Mortice lock 288
Locks for interior and exterior doors, e.g. in office buildings
Features
Grade 2 – EN 12209 approved for fire-rated doors with CE certificate– Lock case size DIN 18251-1, closed case, zinc plated– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– dead bolt, stainless steel, satin– centred forend, satin stainless steel 1.4301 / AISI 304
Recommended Strike plate: 21 side: non-handed
2 S 8 1 0 G 3 H C 2 0
Classification EN 12209
2424
DORMA
Mortice locks CONTRACT
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
12
23
5
15
,5 –
0,5
38
X 30
17
16
53
5
21
,54
6
12
Y
13
13
23
5
32
52
3
Mortice lock 289
Locks for interior and exterior doors, e.g. in office buildings
Features
Grade 2 – EN 12209 approved for fire-rated doors with CE certificate– Lock case size DIN 18251-1, closed case, zinc plated– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– latch handing is reversible– latch, stainless steel, satin– follower, stainless steel, 8 mm square hole,
mounted in drawn steel bushes– centred forend, satin stainless steel 1.4301 / AISI 304
Recommended Strike plate: 23 side: non-handed
2 S 8 1 0 G 3 H 0 2 0
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
2525
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
Mortice lock 290
Locks for interior and exterior doors, e.g. in office buildings
Features
Grade 2 – EN 12209 approved for fire-rated doors with CE certificate– Lock case size DIN 18251-1, closed case, zinc plated– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– latch handing is reversible, with night latch function– latch, stainless steel, satin– follower, stainless steel, 8 mm square hole,
mounted in drawn steel bushes– centred forend, satin stainless steel 1.4301 / AISI 304
Recommended Strike plate: 23 side: non-handed
12
23
5
15
,5 –
0,5
38
X 30
17
16
53
5
21
,54
6
12
Y
13
13
23
5
32
52
3
2 S 8 1 0 G 3 H 0 2 0
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
2626
DORMA
Mortice locks STANDARD
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
23
5
13
13
8
12
Y
12
20
38 38
49
32
52
23
5
72
30X
8
16
53
5
21
,54
61
71
5,5
– 0
,5
3
Mortice lock 271
Locks for interior and exterior doors, e.g. in office buildings
Features
Grade 2 – EN 12209– Lock case size DIN 18251-1, closed case, zinc plated– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– latch handing is reversible– latch and dead bolt, zinc, nickel plated– follower, steel blade, 8 mm square hole,
mounted in drawn steel bushes– centred forend, satin stainless steel 1.4301 / AISI 304,
changeable
Recommended Strike plate: 20 side: non-handed
2 S 8 0 0 G 3 H C 2 0
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
2727
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
12
10
38
49
32
52
23
5
15
,5 –
0,5
X 30
78
16
521
,54
61
7
35
23
5
13
13
8
12
Y
3
38
Mortice lock 275
Locks for bathroom doors, e.g. in office buildings
Features
Grade 2 – EN 12209– Lock case size DIN 18251-1, closed case, zinc plated– lock case prepared for thumbturn
and standard fittings– latch handing is reversible– latch and dead bolt, zinc, nickel plated– follower, steel blade, 8 mm square hole,
mounted in drawn steel bushes and 8 mm bathroom follower
– centred forend, satin stainless steel 1.4301 / AISI 304, changeable
Recommended Strike plate: 20 side: non-handed
2 S 8 0 0 G 3 H G 2 0
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
2828
DORMA
Mortice locks STANDARD
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
20
38 38
13
3
23
5
72
30X
8
16
53
5
23
5
21
,54
61
7
13
8
Y
13
15
,5 –
0,5
3
Mortice lock 278
Locks for interior and exterior doors, e.g. in office buildings
Features
Grade 2 – EN 12209– Lock case size DIN 18251-1, closed case, zinc plated– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– dead bolt, zinc, nickel plated– centred forend, satin stainless steel 1.4301 / AISI 304,
changeable
Recommended Strike plate: 21 side: non-handed
2 S 8 0 0 G 3 H C 2 0
Classification EN 12209
2929
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
12
23
5
15
,5 –
0,5
38
X 30
17
16
53
5
21
,54
6
12
Y
13
13
23
5
52
32
3
Mortice lock 279
Locks for interior and exterior doors, e.g. in office buildings
Features
Grade 2 – EN 12209– Lock case size DIN 18251-1, closed case, zinc plated– lock case prepared for standard fittings– latch handing is reversible– latch, zinc, nickel plated– follower, steel blade, 8 mm square hole,
mounted in drawn steel bushes– centred forend, satin stainless steel 1.4301 / AISI 304,
changeable
Recommended Strike plate: 23 side: non-handed
2 S 8 0 0 G 3 H O 2 0
Classification EN 12209
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
3030
DORMA
Mortice locks STANDARD
Possible variation
Backset: X 55 mm
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
2010
13
8 35
49
84
Y
8
X
38
3
15
850
.514
.5
95
11
81
0
Mortice lock 208
Locks for interior doors, e.g. in office buildings
Features
Grade 2 – EN 12209– closed lock case, zinc plated– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– dead bolt, zinc, nickel plated– centred forend, satin stainless steel 1.4301 / AISI 304,
changeable
Recommended Strike plate: 21 side: non-handed
2 S 8 0 0 G 3 H C 0 0
Classification EN 12209
3131
Possible variation
Backset: X 55 mm
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
31
44
.5
12
84
X
38
16
46
3
15
Y
10
11
8
12
Mortice lock 209
Locks for interior doors, e.g. in office buildings
Features
Grade 2 – EN 12209– closed lock case, zinc plated– lock case prepared for standard fittings– latch handing is reversible– latch, zinc, nickel plated– follower, steel blade, 8 mm square hole,
mounted in drawn steel bushes– centred forend, satin stainless steel 1.4301 / AISI 304,
changeable
Recommended Strike plate: 23 side: non-handed
2 S 8 0 0 G 3 H 0 2 0
Classification EN 12209
3232
DORMA
Mortice locks STANDARD
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
15
3
23
5
98
27
.53
6.5
14.2
35
20
8.5
38
38
87
26
3
21
.54
6
16
5
20
91
3
35
Y
14
8
X
Mortice lock 232
Locks for interior and exterior swing doors, e.g. in office buildings
Features
Grade 2 – EN 12209– Lock case size DIN 18251-1, closed case, zinc plated– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– Roller latch (protrusion adjustable) and dead bolt,
solid metal alloy, nickel plated– centred forend, satin stainless steel 1.4301 / AISI 304,
changeable
Recommended Strike plate: 27 side: non-handed
2 S 8 0 0 G 3 H C 0 0
Classification EN 12209
3333
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
10
38
38
13
3
23
5
72
30X
8
16
5
23
5
21
,54
61
7
13
8
Y
13
15
,5 –
0,5
35
3
Mortice lock 233
Locks for bathroom doors, e.g. in office buildings
Features
Grade 2 – EN 12209– Lock case size DIN 18251-1, closed case, zinc plated– lock case prepared for thumbturn 8 mm
and standard fittings– dead bolt, zinc, nickel plated– centred forend, satin stainless steel 1.4301 / AISI 304,
changeable
Recommended Strike plate: 21 side: non-handed
Classification EN 12209
2 S 8 0 0 G 3 H G 0 0
3434
DORMA
Mortice locks STANDARD
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
12
23
5
15
,5 –
0,5
38
X 30
17
16
53
5
21
,54
6
12
Y
13
13
23
5
32
52
3
72
8
Mortice lock 234
Locks for interior doors, e.g. in office buildings
Features
Grade 2 – EN 12209– Lock case size DIN 18251-1, closed case, zinc plated– lock case prepared for Euro profile cylinder (DIN18252)
and standard fittings– latch handing is reversible– latch, zinc, nickel plated– follower, steel blade, 8 mm square hole,
mounted in drawn steel bushes– follower lockable by cylinder– centred forend, satin stainless steel 1.4301 / AISI 304,
changeable
Recommended Strike plate: 23 side: non-handed
Classification EN 12209
2 S 8 0 0 G 3 H O 2 0
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
3535
Possible variation
Backset: X 55 mm 60 mm 65 mm 70 mm* 80 mm**on request
Dimension of forend: Ysquare 20 mm 24 mmrounded 20 mm 24 mm
12
10
38
49
32
52
23
5
15
,5 –
0,5
38
X 30
8
72
16
521
,54
61
7
35
23
5
13
13
8
12
Y
3
Mortice lock 235
Locks for bathroom doors, e.g. in office buildings
Features
Grade 2 – EN 12209– Lock case size DIN 18251-1, closed case, zinc plated– lock case prepared for thumbturn
and standard fittings (c/c 72 mm)– latch handing is reversible– latch and dead bolt, zinc, nickel plated– follower, steel blade, 8 mm square hole,
mounted in drawn steel bushes and 8 mm bathroom follower
– centred forend, satin stainless steel 1.4301 / AISI 304, changeable
Recommended Strike plate: 20 side: non-handed
Classification EN 12209
2 S 8 0 0 G 3 H G 2 0
DORMA locks are prepared to be used with the levers of DORMA Beschlagtechnik
3636
DORMA
Strike plates
Strike plates Type 020
Material: satin stainless steel
451.524
10
9
50
45
16
5
Strike plates Type 021
24
54
1.5
l 5.6
Strike plates Type 020-1
Strike plates Type 023
4524
45
1.5
l 5.6
451.524
10
9
50
45
16
5
Material: satin stainless steel
Material: satin stainless steel Material: satin stainless steel
3737
Compatibility with the previous program
381 151-F385 191-F388 132-F389 115-F
391 210392 117394 781
371 151375 191378 132379 115
New program Previous program
300 CE
300
281 752-F285 790-F288 532-F289 515-F290 116
271 771275 775278 778279 779
200 CE
200
Locks of the previous program can be easily replaced by the locks of the new program. The dimensions as well as the functions of the two programs are similar. The figure below shows the compatibility of the two programs.
38
DORMA
Specification text
DORMA Mortice CE lock – PREMIER
Locks for interior and exterior doors and fire-rated doors, intended for public buildings, Grade 3 – EN 12209, appro-ved for fire-rated doors with CE-certificate, Lock case size DIN 18251-1, Latch handing is reversible, Lock case pre-pared for standard fittings, closed case, zinc plated, black painted, Latch and deadbolt satin stainless steel, Reinforced deadbolt with hardened anti-saw pins and anti-picking shield, Deadbolt projection double throw 20 mm (bathroom / WC 10 mm), Clamp follower 8 mm, stainless steel, with separate bush bearing, Centred forend, satin stainless steel AISI 316
Lock type( ) Europrofile cylinder with night latch function, 72 mm
centres, with sleeves (381)( ) Bathroom/WC, for WC knob – 8 mm, 78 mm centres,
with sleeves (385)( ) Deadbolt lock, Europrofile cylinder, with sleeves (388)( ) Latch lock, with sleeves (389)( ) Europrofile cylinder, anti-thrust latch and deadbolt,
72 mm centres (391)( ) Europrofile cylinder, anti-thrust latch, 72 mm centres (392)( ) Europrofile cylinder, anti-thrust latch, split follower,
classroom function, 72 mm centres (393)( ) Europrofile cylinder, with night latch function, backset
45 mm only, 85 mm centres (394)
Backset: Forend width Forend design( ) 45 mm* ( ) 20 mm ( ) Rounded ends ( ) 55 mm ( ) 24 mm ( ) Square ends( ) 60 mm ( ) 65 mm ( ) 70 mm*( ) 80 mm*
*on request
DORMA Mortice lock – PROJECT
Locks for interior and exterior doors, intended for public buildings, Grade 3 – EN 12209, lock case size DIN 18251-1, Latch handing is reversible, Lock case prepared for standard fittings, closed case with sleeves, zinc plated, black painted, Latch and deadbolt satin stainless steel, Reinforced dead-bolt with hardened anti-saw pins and anti-picking shield, Deadbolt projection double throw 20 mm (bathroom / WC 10 mm), Clamp follower 8 mm, stainless steel, with separate bush bearing, Centred forend, satin stainless steel AISI 316
Lock type( ) Europrofile cylinder with night latch function, 72 mm
centres (371)( ) Bathroom/WC, for WC knob – 8 mm, 78 mm centres (375)( ) Deadbolt lock, Europrofile cylinder (378)( ) Latch lock (379)
Backset: Forend width Forend design( ) 55 mm ( ) 20 mm ( ) Rounded ends ( ) 60 mm ( ) 24 mm ( ) Square ends( ) 65 mm ( ) 70 mm* ( ) 80 mm*
*on request
39
DORMA Mortice CE lock – CONTRACT
Locks for interior and exterior doors and fire-rated doors, intended for office buildings, Grade 2 – EN 12209, approved for fire-rated doors with CE-certificate, Lock case size DIN 18251-1, Latch handing is reversible, Lock case prepared for standard fittings, closed case, zinc plated, Latch and deadbolt satin stainless steel, Deadbolt projection double throw 20 mm (bathroom / WC 10 mm), Clamp follower 8 mm, stainless steel, mounted in drawn steel bushes, Centred forend, satin stainless steel AISI 304
Lock type( ) Europrofile cylinder with night latch function, 72 mm
centres (281)( ) Bathroom/WC, for WC knob – 8 mm, 78 mm centres (285)( ) Deadbolt lock, Europrofile cylinder (288)( ) Latch lock (289)( ) Latch lock, Europrofile cylinder with night latch function,
72 mm centres (290)
Backset: Forend width Forend design( ) 55 mm ( ) 20 mm ( ) Rounded ends ( ) 60 mm ( ) 24 mm ( ) Square ends( ) 65 mm ( ) 70 mm* ( ) 80 mm*
*on request
DORMA Mortice lock – STANDARD
Locks for interior and exterior doors, intended for office buildings, Grade 2 – EN 12209, lock case size DIN 18251-1, Latch handing is reversible, Lock case prepared for standard fittings, closed case, zinc plated, Latch and deadbolt zinc, nickel plated, Deadbolt projection double throw 20 mm (bathroom / WC 10 mm), Follower 8 mm, steel blade, mounted in drawn steel bushes, Centred forend, satin stainless steel AISI 304
Lock type( ) Europrofile cylinder with night latch function, 72 mm
centres (271)( ) Bathroom/WC, for WC knob – 8 mm, 78 mm centres (275)( ) Deadbolt lock, Europrofile cylinder (278)( ) Latch lock (279)( ) Deadbolt lock, small case, 55 mm backset only,
Europrofile cylinder, latch and deadbolt satin stainless steel (208)
( ) Latch lock, small case, 55 mm backset only, latch and deadbolt satin stainless steel (209)
( ) Europrofile cylinder, roller latch and deadbolt, 72 mm centres (232)
( ) Deadbolt lock, for WC knob – 8 mm (233)( ) Europrofile cylinder, latch and lockable handle, 72 mm
centres (234)( ) Bathroom/WC, for WC knob – 8 mm, 72 mm centres (235)
Backset: Forend width Forend design( ) 55 mm ( ) 20 mm ( ) Rounded ends ( ) 60 mm ( ) 24 mm ( ) Square ends( ) 65 mm( ) 70 mm*( ) 80 mm*
*on request
Door Control
Automatic
Glass Fittings and Accessories
Security/Timeand Access (STA)
Movable Walls
WN
05
3 7
94
51
53
2,
08
/10
, M
orti
ce L
ocks
, G
B,
x. D
D.
xx/1
0
· S
ubje
ct t
o ch
ange
wit
hout
not
ice
www.dorma.com
Door Control Division worldwide
Central Europe DORMA GmbH + Co. KG DORMA Platz 1 D-58256 Ennepetal Tel. +49 2333 793-0Fax +49 2333 793-495
Australasia DORMA Door Controls Pty. Ltd. 52, Abbott Road Hallam/Victoria 3803 Australia Tel. +61 3 8795 0666 Fax +61 3 8795 0280
China/Hong Kong DORMA Door Controls (Suzhou) Co. Ltd. No. 9, Hong Feng Road Suzhou Singapore Industrial Park Suzhou, 215021 P.R. of China Tel. +86 512 67612481 Fax +86 512 67614582
DORMA Door Controls Pte. Ltd. Room 701, Technology Plaza 651 King’s Road North Point Hong Kong Tel. +852 25034632 Fax +852 28875370
Emerging Markets DORMA GmbH + Co. KG DORMA Platz 1 D-58256 Ennepetal Tel. +49 2333 793-0Fax +49 2333 793-495
DORMA Door Controls (Pty.) Ltd. Kings Court 4A Mineral Crescent ZA-2000 Crown/Gauteng South AfricaTel. +27 11 8300280 Fax +27 11 8300291
Far East DORMA Far East Pte. Ltd.No. 31 Gul Lane Singapore 629425 Tel. +65 6268 7633 Fax +65 6265 7995
France DORMA France S.A.S. Zone Europarc Immeuble Mega 42 42, Rue Eugène Dupuis F-94046 Créteil Cedex Tel. +33 1 41942400 Fax +33 1 41942401
Gulf DORMA Gulf Door Controls FZE Jebel Ali Free Zone South Plot No. S 20135 Road No. SW 301 G P.O. Box 17268 Dubai – United Arab Emirates Tel. +971 4 8020400Fax +971 4 8869100 / 8869101
North America DORMA Architectural Hardware DORMA Drive, Drawer AC Reamstown, PA 17567-0411 Tel. +1 800 5238483 Fax +1 800 2749724
Scanbalt DORMA Danmark A/S Sindalvej 6–8 DK-2610 Rødovre Tel. +45 44 543000 Fax +45 44 543001
South America DORMA Sistemas de Controles para Portas Ltda. Av. Piracema, 1400 Centro Empresarial Tambore CEP 06400-933 Barueri/ São Paulo, Brasil Tel. +55 11 46899280 Fax +55 11 46899215
South-East Europe DORMA AUSTRIA GmbH Pebering Strass 22 A-5301 Eugendorf Tel. +43 6225 284880 Fax +43 6225 28491
South Europe DORMA Italiana S.r.l. Via. Canova 44/46 I-20035 Lissone (MI) Tel. +39 039 244031 Fax +39 039 24403310
DORMA Ibérica, S.A. Camino San Martin de la Vega, 4 E-28500 Arganda del Rey (Madrid) Tel. +34 91 8757850 Fax +34 91 8757881
UK/Ireland DORMA UK Ltd. Wilbury Way Hitchin GB-Hertfordshire SG4 0AB Great Britain Tel. +44 1462 477600 Fax +44 1462 477601