SH
OTC
RET
E &
SM
ALL
LIN
E
SHOTCRETE & SMALL LINE PRODUCTS & ACCESSORIES
L E A D I N G T H E W A Y I N C O N C R E T E P U MP
I NG
SY
ST
EM
S
AN INDUSTRY LEADER FOR OVER 50 YEARS
Delivering Performance, Profitability and Safety
Con Forms, the only manufacturer of concrete placing systems in the United States, is located in the heartland of America and employs over 200
people in the USA, the United Kingdom, Asia and Europe to reinforce global service offerings and support projects both domestically and internationally. We provide state-of-the-art automated manufacturing processes, heat-treating and testing facilities, a full metallurgy lab, and in-house engineering staff to ensure every customer understands their options and ideal solutions as well as receive products of the highest
quality and lowest total cost of ownership (TCO).
Unrivaled Product Quality, Selection and Service
Con Forms offers a vast product line that covers everything from the pump to the point of placement on a concrete pour – including backend kits for all pump
manufacturers, boom kits, laydown lines, couplings, hose and accessories. The full line of placing equipment includes tunnel placers, deck placers, bridge deck spreaders and self-propelled Spider Placer units, which can be engineered to fit any application requirements.
The company’s expert technical sales and in-house engineering staff has decades of hands-on experience solving almost every conceivable global high-rise pumping application. They understand the risks, costs, and performance demands bringing exceptional solutions to high-rise jobsites. Through this process, the company delivers the industry’s leading abrasion resistant pipe, unique bends, custom valves, placing equipment and laydown systems that are tailored to the requirements of each individual project.
Much more than a Vendor
Con Forms is a true value creating partner to its customers and the industry – a manufacturer that listens to customers and works with the industry to develop world-class products specific to their needs. Con Forms’ sales engineers have seen thousands of projects from the planning phase through to completion. The company’s design and manufacturing capabilities, technology, safety standards, and service have consistently provided quality products and added value unrivaled in the industry.
The Con Forms’ dedication to excellence grows with every year of business and with customers served. Don’t trust the safety of your employees and success of your business with unproven, unsupported and unreliable products. Put your trust with a guaranteed solutions provider that backs their product and supports customer efforts every step of the way. Trust Con Forms.
THE CF ADVANTAGE
GLOBAL ENGINEERING, TESTING AND MANUFACTURING HEADQUARTERS - PORT
WAS
HING
TON,
WI,
USA
THE CF ADVANTAGE
THE CF ADVANTAGE
CONSISTENT HARDNESS = INDUSTRY’S BEST ABRASION RESISTANCE &
PRO
DUCT
PER
FORM
ANCE
CONSISTENT WELD QUALITY = INDUSTRY’S BEST PRODUCT SAF
ETY
& PE
RFOR
MAN
CE
Mining, swimming pool construction, skate parks and shoring are the typical application for
shotcrete. Small line is less technical, block fill, backyard patios, housing pads, sidewalks, etc.
■ Pool Construction
■ Skate Parks
■ Shoring
■ Block Fill
■ Patios
■ Housing Pads
SHOTCRETE PARTS & COMPONENTS
For additional information or to place an order, please call 800.223.3676 Visit us online at www.conforms.com4 5
Discharge hose with four layers of woven wire reinforcement and an extruded rubber tube. Manufacturer, size, weight and working pressure embossed on outer wrapper.
Part # Size (in/mm) Mfg. Min. Burst (bar/psi)
Working Pressure (bar/psi)
Weight (lbs/kg)
F.W.C per ft. (lbs/kg)
H15N1_ _K 1-1/2 / 38 200 / 2900 100 / 1450 0.8 / .36 2.7 / 1.2
H20N1_ _K 2 / 51 200 / 2900 100 / 1450 1.5 / .68 4.7 / 2.1
H25N1_ _K 2-1/2 / 63.5 200 / 2900 100 / 1450 2.6 / 1.2 7.9 / 3.6
H30N1_ _K 3 / 76 125 / 1800 70 / 1000 3.3 / 1.5 10.7 / 4.9
N1 TRELLEBORG DISCHARGE HOSE
Discharge hose with woven fiber reinforcement and an extruded rubber tube. Our new Flex-Bond 1250 line has high-performance textile reinforcement layers with innovative weave design for increased textile strength, pressure rating, and stiffness to reduce hose kinks.
FLEX-BOND 1250 HOSE
Part # Size (in/mm) Mfg. Min. Burst (bar/psi)
Working Pressure (bar/psi)
Weight (lbs/kg)
F.W.C per ft. (lbs/kg)
H12FB_ _ _ _C 1-1/4 / 32 170 / 2465 85 / 1233 0.71 / .32 1.99 / .9
H15FB_ _ _ _C 1-1/2 / 38 170 / 2465 85 / 1233 0.93 / .42 2.77 / 1.25
H20FB_ _ _ _C 2 / 51 170 / 2465 85 / 1233 1.18 / .54 4.45 / 2.02
H25FB_ _ _ _C 2-1/2 / 63.5 170 / 2465 85 / 1233 1.67 / .76 6.78 / 3.08
H30FB_ _ _ _C 3 / 76 170 / 2465 85 / 1233 2.51 / 1.14 9.87 / 4.47
Boom hose with four layers of woven wire reinforcement and an extruded rubber tube. Manufacture size, weight and working pressure are embossed on the outer wrapper.
STEEL-BOND 1250 BOOM HOSE
Part # Size (in/mm) Mfg. Min. Burst (bar/psi)
Working Pressure (bar/psi)
Weight (lbs/kg)
F.W.C per ft. (lbs/kg)
H15SB_ _C 1-1/2 / 38 170 / 2500 85 / 1233 1.22 / .56 3.1 / 1.4
H20SB_ _C 2 / 51 170 / 2500 85 / 1233 1.54 / .70 4.8 / 2.2
H25SB_ _C 2-1/2 / 63.5 170 / 2500 85 / 1233 2.24 / 1.0 7.4 / 3.3
H30SB_ _C 3 / 76 170 / 2500 85 / 1233 4.29 / 1.9 11.7 / 5.3
Boom hose with four layers of woven wire reinforcement and an extruded rubber tube, available in 3 to 6 inch diameters.
N2 TRELLEBORG BOOM HOSE
Part # Size (in/mm) Mfg. Min. Burst (bar/psi)
Working Pressure (bar/psi)
Weight (lbs/kg)
F.W.C per ft. (lbs/kg)
H30N2_ _K 3 / 76 200 / 2940 85 / 1233 3.7 / 1.7 11.1 / 5.0
H35N2_ _K 3-1/2 / 89 200 / 2940 85 / 1233 4.8 / 2.2 15.1 / 6.8
SMALL LINE HOSE
For additional information or to place an order, please call 800.223.3676 Visit us online at www.conforms.com4 5
Hose with four layers of woven wire reinforcement and an extruded rubber tube. Manufacturer, size, weight and working pressure embossed on outer wrapper.
HIGH-PRESSURE STEEL WIRE HOSE
Part # Size (in/mm) Mfg. Min. Burst (bar/psi)
Working Pressure (bar/psi)
Weight (lbs/kg)
F.W.C per ft. (lbs/kg)
H20HW_ _C 2 / 51 275 / 4000 85 / 1233 2.67 / 1.2 5.94 / 2.69
Part # Size (in/mm) Mfg. Min. Burst (bar/psi)
Working Pres-sure (bar/psi)
Weight (lbs/kg)
F.W.C per ft. (lbs/kg)
H10PG_ _C 1 / 25 120 / 1800 40 / 600 .06 / .27 1.1 / .5
H15PG_ _C 1-1/2 / 35 120 / 1800 40 / 600 .97 / .44 2.2 / 1.0
H20PG_ _C 2 / 50 120 / 1800 40 / 600 1.2 / .54 4.3 / 1.9
Plaster & Grout Discharge Hose with four layers of high strength synthetic cord with 40 bar working pressure 3:1 SF. Hose supplied with European cam-lock ends.
PLASTER & GROUT DISCHARGE HOSE
Discharge hose with two layers of woven cable reinforcement and an extruded rubber tube. Manufacturer, size, weight and working pressure embossed on outer wrapper.
N3 IVG DISCHARGE HOSE
Part # Size (in/mm) Mfg. Min. Burst (bar/psi)
Working Pressure (bar/psi)
Weight (lbs/kg)
F.W.C per ft. (lbs/kg)
H20N3_ _C 2 / 51 170 / 2500 85 / 1233 1.9 / .86 5.2 / 2.36
6 7 For additional information or to place an order, please call 800.223.3676 Visit us online at www.conforms.com
Full 9.5mm wall throughout with Hevi-Duty™ ends.
Part # Inlet Size (in) Outlet Size (in) Length (in/mm) Weight (lbs/kg)
186P18277 3.0 2.0 28 / 711 30 / 13.6
Part # Size (in/mm) Length (in/mm) End Type End Type
R201224DF 2.0 1.13 24 / 609 7.7 / 3.5
R201512D 2.0 1.5 12 / 304 5.0 / 2.3
R201518D 2.0 1.5 18 / 457 6.1 / 2.8
R252028D 2.5 2.0 28 / 711 17.5 / 7.9
R302028D 3.0 2.0 28 / 711 18.5 / 8.4
R302028DG 3.0 2.0 28 / 711 18.5 / 8.5
R302528D 3.0 2.5 28 / 711 18.5 / 8.4
R302036D 3.0 2.0 36 / 914 21.5 / 9.8
R302036DG 3.0 2.0 36 / 914 20 / 9.1
R403036D 4.0 3.0 36 / 914 32 / 14.5
R504036D 5.0 4.0 36 / 914 37 / 17
SHOTCRETE HARDENED CAST REDUCER
SHOTCRETE STEEL REDUCER
One and two port manifold shotcrete nozzles.
Part # Size (in.) Notes Replacement Nozzle w/Hardware
194-11387_ 1.25 --- 194-11984 No
194-19691_ 1.50 3/16" holes drilled in nozzle body 194P11869 No
194-19978 1.50 Dual port 194P11869 No
194-10499_ 2.00 Hi-Velocity, with ball valve fitting 194P09797 No
194-29842 2.00 Nozzle with Hi-Vel Head Tip, HD End 194P17895 No
194-31552D 2.00 Nozzle with Hi-Vel Head Tip, HD End 194P17895 Yes
194-20890_ 2.00 Hi-Velocity dual ports, 1/2” NPT 194P17895 No
194-15264_ 2.50 --- 194P10512 No
194-15264_2 2.50 with 2” inlet 194P10512 No
194-11091_ 3.00 with 2 port manifold n/a No
SHOTCRETE NOZZLE
SHOTCRETE & SMALL LINE COMPONENTS
Part # Description
V50ASC-RC12 Universal Remote Control Unit for Air Cuff
V30FAC-12R 3"Air Cuff Hose Shut-Off Valve-12V with Remote
V30FAC-A 3" Fabric Air Cuff Assembly with Valve
V30FAC-MAN Fabric Air Cuff Assembly with Manual Valve
V30FAC-MSL Manual Valve Assembly for Fabric Air Cuff
V30FAC-REBUILD 3"Fabric Air Cuff rebuild kit
The simple to use and patented Air-CuffTM is ideally suited for 1.5” to 3” hoses to control and shut-off the flow of concrete. It is a safe, lightweight (≤7 lbs.) and durable solution with a replaceable bladder for extended use. Meets CPMA standards. The unit is available with manual or wireless shut-off for use on all pumps and can be left installed to save time with set-up and breakdown.
LIGHT WEIGHT FABRIC AIR-CUFF™ HOSE SHUT-OFF VALVE
6 7 For additional information or to place an order, please call 800.223.3676 Visit us online at www.conforms.com
Part # Extra Gaskets Part # Size (in/mm) End Type Weight (lbs/kg)
C15SG CG15G 1.5/38 Grooved 1.6 / .73
C15SD CG15D 1.5/38 Hevi-Duty™ 3.0 / 1.4
C20SG CG20G 2/50.8 Grooved 2.4 / 1.1
C20SD CG20D 2/50.8 Hevi-Duty™ 4.8 / 2.2
C25SD CG25D 2.5/63.5 Hevi-Duty™ 5.0 / 2.3
C30SD CG30D 3/76 Hevi-Duty™ 8.5 / 3.9
C40SD CG40D 4/102 Hevi-Duty™ 10.9 / 4.9
C50SD CG50D 5/127 Hevi-Duty™ 13.5 / 6.1
SMALL LINE COUPLINGS
Section 1
H = HoseSection 5: End Style
M1 = Metric (1 end)D1 = Hevi-Duty™ (1 end)M2 = Metric (2 ends)D2 = Hevi-Duty (2 ends)TM = Tapered MetricTD = Tapered Hevi-DutyRD = Tapered Neck Hevi-DutyRM = Tapered Metric
Section 2: Inside Diameter
10 = 1”12 = 1.25”15 = 1.5”20 = 2”25 = 2.5”30 = 3”35 = 3.5”40 = 4”45 = 4.5”50 = 5”60 = 6”
Section 6
C = Steel Bond / Flex BondK = Trelleborg / Kleber
Section 3: Hose Type
FB = Flex Bond DischargeSB = Steel Bond 1250N1 = Trelleborg DischargeN2 = Trelleborg BoomN3 = IVG / TrelleborgRN = Ruff-Neck ReducingHW = 2” High PressurePG = Plaster & Grout
Section 4: Overall Length (feet)
03 = 3’04 = 4’05 = 5’06 = 6’07 = 7’08 = 8’09 = 9’10 = 10’11 = 11’12 = 12’99 = 99’100 = 100’
*H50S110D2C = 10’ length of 5.0” I.D. Steel-bond Discharge Hose with 2 Hevi-Duty Ends
HSection 1
50Section 2
N1Section 3
10Section 4
D2Section 5
CSection 6
BUILD YOUR PART NUMBERGUIDE TO CON FORMS HOSE
* Custom hose lengths available. Contact factory for details.
North America
Europe
800-223-3676
777 MARITIME DRPORT WASHINGTON, WI 53074
WWW.CONFORMS.COM
Major global markets served
© Con Forms - 02.2021.SLC.REV2