+ All Categories
Transcript

Solar PV | Inverters and UPS19

Solar PV | Inverters and UPS20

Bi-Directional Inverter / ChargersDesign your hybrid solar system using high quality Swiss made battery inverters, battery management and MPPT chargers. Suitable for a variety of system types, these high grade components are among the best in the world.

XTS (0.9-> 1.4kVA) XTM (1.5-> 1.4kVA) XTH (3-> 8kVA)

Features and performance

• True sine wave voltage• Reliable and silent with any kind of load• Outstanding overload capabilities• AC and DC coupled solar solutions• Parallel single phase and 3 phase confi gurations

easily confi gured

• Multi-stage programmable battery charger with PFC (Power Factor Correction)

• Stand-by level adjustable over a large range and from a very low threshold

• Ultra-fast transfer relay• Control by digital signal processors (DSP)• High effi ciency• 5-year warranty

Product Code Power P30 / Pnom [Va] Battery Voltage Unom [V]

Current Transfer Imax [A]

Charger Current Imax [A]

XTS 900-12 900** / 500 12 16 35

XTS 1200-24 1200** / 650 24 16 25

XTS 1400-48 1400** / 750 48 16 12

XTM 1500-12 1500 / 1500 12 50 70

XTM 2000-12 2000 / 2000 12 50 100

XTM 2400-24 2400 / 2000 24 50 55

XTM 2600-48 2600 / 2000 48 50 30

XTM 3500-24 3500 / 3000 24 50 90

XTM 4000-48 4000 / 3500 48 50 50

XTH 3000-12 3000 / 2500 12 50 160

XTH 5000-24 5000 / 4500 24 50 140

XTH 6000-48 6000 / 5000 48 50 100

XTH 8000-48 8000 / 7000 48 50 120

** Additional power with the ECF-01 fan module, as an option

Parallel 3 phase operation, up to 27kW per phase Single phase DC coupled confi guration with generator backup

XTS

XTM

XTH

19Solar PV | Inverters and UPS

20www.rubiconsa.com

MPPT Solar Charge ControllersVarioString series VarioTrack series

MPPT solar charge controllers for systems with solar PV capacity from 1 - 75kWp (with 15 in parallel), a PV input voltage up to 150V DC, and 12V, 24V or 48V battery banks.

Max. 150V DC / 5kWp 12, 24, 48V

MPPT

Product Code Recommended PV Power [W]

Battery Voltage Unom [V]

PV Voltage U [V] Max Charge Current Imax [A]

VT-65 1000 (12V) 2000 (24V) 4000 (48V)

12V / 24V / 48V 80 (12V) / 150 (24-48V)

65

VT-80 1250 (12V) 2500 (24V) 5000 (48V)

12V / 24V / 48V 80 (12V) / 150 (24-48V)

80

VarioString SeriesMPPT solar charge controllers for systems with solar PV capacity from 3 - 105kWp (with 15 in parallel), a PV input voltage up to 900V DC and 48V battery banks. Includes galvanic isolation between the PV and battery circuits.

Max 900VDC / 7kWp 48V

MPPT

Product Code Recommended PV Power [W]

Battery Voltage Unom [V]

PV Voltage U [V]

Max Charge Current Imax [A]

VS-120 7000 48 250-500 parallel / 500-750 series

120

VS-70 4200 48 250-500 70

Accessories: Remote Control And Programming CentreThe RCC-02 enables user supervision and control of the system via the many parameter settings.

Product Code Mounting Dimensions (HxLxl)

RCC-02 Surface mounted 170x168x43.5mm

RCC-03 Flush mounted 170x168x43.5mm

For use with Xtender, VarioTrack and VarioString systems.

Accessories: Battery Status ProcessorFor precise battery measurements and an algorithm that calculates the state of charge in the most accurate way.

Product Code Shunt Dimensions (HxLxl)

BSP 500 500A shunt 110.5x75x26mm

BSP 1200 1200A shunt 110.5x75x26mm

Also requires: either RCC-02 or RCC-03 | For use with Xtender, VarioTrack and VarioString systems.

VS

VT

RCC-02

BSP*

Solar PV | Inverters and UPS21

Solar PV | Inverters and UPS22

Accessories: Communication Module Xcom-232IXcom-232i is an RS232 serial bridge for communications access to a Studer system consisting of one or more Xtenders, VarioTracks or VarioStrings from any host.

Product Code Dimension (HxLxl)

BSP 500 110.5x75x26mm

For use with Xtender, VarioTrack and VarioString systems.

Accessories: Communication SetsFor Internet communication to the Studer Internet Portal, from where all parameters, real time system details and the last 30 days of log fi les can be viewed. Full system control as if from as RCC-02/03.

Product Code Description

Xcom-LAN (1 x Ethernet port and all necessary accessories)

Xcom-GSM (GSM modem and all necessary accessories)

For use with Xtender, VarioTrack and VarioString systems.

Accessories: Communication Module Xcom-CanFor communication with Lithium BMSs. (List of compatible batteries available on request)

Product Code Xcom-CAN

Accessories: X-Connect Multi Xtender System

Communication Cable

The pre-wired mounting off ers a fl exible and cost eff ective solution for high power systems (up to 63kVA) based on the XTH inverter/charger.

Connect Xtenders, VarioTracks and the VarioStrings together to build multi-unit systems.

BTS-01 Battery Temperature SensorAccurately adapt the charge thresholds to the battery temperature.

Product Code Dimensions (HXLXW)

BTS-01 58x51,5x22mm

BSP 500

Xcom- LAN

Xcom-GSM

Xcom-CAN

BTS-01


Top Related