Notes to instructorsIntroduction
The following ideas and information are provided to assist the instructor in the design and implementationof the course. Traditionally this course is taught at Washington State University and the University of Idaho as athree-credit semester course which means 3 hours of lecture per week for 15 weeks. Basically the rst 11 chaptersand Chapter 13 (Flow Measurements) are covered in Mechanical Engineering. Chapters 12 (Compressible Flow)and Chapter 14 (Turbomachinery) may be covered depending on the time available and exposure to compressibleow in other courses (Thermodynamics). Open channel ow (Chapter 15) is generally not covered in MechanicalEngineering. When the text is used in Civil Engineering, Chapters 1-11 and 13 are nominally covered and Chapters14 and 15 may be included if time permits and exposure to open channel ow may not be available in other courses.The book can be used for 10-week quarter courses by selecting the chapters, or parts of the chapters, most appropriatefor the course.
Author Contact
Every e!ort has been made to insure that the solution manual is error free. If errors are found (and theywill be!) please contact Professors Crowe or Elger.
Donald Elger Clayton CroweMechanical Engineering Dept School of Mechanical Eng. & Matl. ScienceUniversity of Idaho Washington State UniversityMoscow, ID 83844-0902 Pullman, WA 99164-2920Phone (208) 885-7889 Phone (509) 335-3214Fax (208) 885-9031 Fax (509) 335-4662e-mail: [email protected] e-mail: [email protected]
Design and Computer Problems
Design problems (marked in the text in blue) are those problems that require engineering practices suchas estimation, making asummptions and considering realistic materials and components. These problems provide aplatform for student discussion and group activity. One approach is to divide the class into small groups of three orfour and have these groups work on the design problems together. Each group can then report on their design tothe rest of the class. The role of the professor is to help the student learn the practices of the design review—that is,teach the student to ask in-depth questions and teach them how to develop meaningful and in-depth answers. Thisdialogue stimulates interest and class discussion. Solutions to most design problems are included in the solutionmanual.
Computer-oriented problems (marked in the text is blue) are those problems may best be solved usingsoftware such as spreadsheets, TK Solver or MathCad. The choice is left to the student. The answer book alsoincludes the results for the computer-oriented problems.
1
PROBLEM 2.1
Situation: An engineer needs density for an experiment with a glider.Local temperature = 74.3 !F = 296!7K!Local pressure = 27.3 in.-Hg = 92!45 kPa!
Find: (a) Calculate density using local conditions.(b) Compare calculated density with the value from Table A.2, and make a recom-mendation.
Properties: From Table A.2, "air = 287 Jkg·K , # = 1!22 kg$m
3!
APPROACH
Apply the ideal gas law for local conditions.
ANALYSIS
a.) Ideal gas law
# =%
"&
=92' 450N$m2
(287 kg$m3) (296!7K)
= 1!086 kg/m3
# = 1!09 kg/m3 (local conditions)
b.) Table value. From Table A.2
# = 1!22 kg/m3 (table value)
COMMENTS
1. The density di!erence (local conditions versus table value) is about 12%. Mostof this di!erence is due to the e!ect of elevation on atmospheric pressure.
2. Answer ! Recommendation—use the local value of density because the e!ectsof elevation are signicant.
1
PROBLEM 2.2
Situation: Carbon dioxide is at 300 kPa and 60oC.
Find: Density and specic weight of CO2!
Properties: From Table A.2, "CO2 = 189 J/kg·K.
APPROACH
First, apply the ideal gas law to nd density. Then, calculate specic weight using( = #)!
ANALYSIS
Ideal gas law
#CO2 =*
"&
=300' 000
189(60 + 273)
= 4!767 kg/m3
Specic weight( = #)
Thus
(CO2 = #CO2 × )= 4!767× 9!81= 46.764 N/m3
2
PROBLEM 2.3
Situation: Methane is at 500 kPa and 60oC.
Find: Density and specic weight.
Properties: From Table A.2, "Methane = 518 Jkg·K .
APPROACH
First, apply the ideal gas law to nd density. Then, calculate specic weight using( = #)!
ANALYSIS
Ideal gas law
#He =*
"&
=500' 000
518(60 + 273)
= 2.89 kg/m3
Specic weight( = #)
Thus
(He = #He × )= 2!89× 9!81= 28.4 N/m3
3
PROBLEM 2.4
Situation: Natural gas (10 !C) is stored in a spherical tank. Atmospheric pressure is100 kPa.Initial tank pressure is 100 kPa-gage. Final tank pressure is 200 kPa-gage.Temperature is constant at 10 !C!
Find: Ratio of nal mass to initial mass in the tank.
APPROACH
Use the ideal gas law to develop a formula for the ratio of nal mass to initial mass.
ANALYSIS
Mass+ = #, (1)
Ideal gas law
# =%
"&(2)
Combine Eqs. (1) and (2)
+ = #,"= (%$"& ),"
Volume and gas temperature are constant so
+2
+1=%2%1
and
+2
+1=
300 kPa200 kPa
= 1.5
4
PROBLEM 2.5
Situation: Water and air are at & = 100o- and % = 5 atm.
Find: Ratio of density of water to density of air.
Properties: From Table A.2, "air = 287 J/kg·K. From Table A.5, #water = 958 kg/m3!
APPROACH
Apply the ideal gas to air. Look up the density of water in Table A.5.
ANALYSIS
Ideal gas law
#air =%
"&
=506' 600
287(100 + 273)
= 4!73 kg/m3
For water#water = 958 kg/m
3
Ratio
#water#air
=958
4!73
= 202
5
PROBLEM 2.6
Situation: Oxygen (% = 400 psia, & = 70 !F)lls a tank. Tank volume = 10 ft3! Tankweight =100 lbf.
Find: Weight (tank plus oxygen).
Properties: From Table A.2, "O2 = 1555 ft·lbf/(slug ·o ") !
APPROACH
Apply the ideal gas law to nd density of oxygen. Then nd the weight of the oxygenusing specic weight (() and add this to the weight of the tank.
ANALYSIS
Ideal gas law
%abs. = 400 psia× 144 psf/psi = 57' 600 psf& = 460 + 70 = 530!"
# =%
"&
=57' 600
1555× 530= 0!0699 slugs/ft3
Specic weight (oxygen)
( = #)
= 0!0699× 32!2= 2!25 lbf/ft3
Weight of lled tank
.oxygen = 2!25 lbf/ft3 × 10 ft3
= 22!5 lbf
.total = .oxygen +.tank
= 22!5 lbf + 100 lbf
.total = 122.5 lbf
COMMENTS
For compressed gas in a tank, pressures are often very high and the ideal gas assump-tion is invalid. For this problem the pressure is about 27 atmospheres—it is a goodidea to check a Thermodynamics reference to analyze whether or not real gas e!ectsare signicant.
6
PROBLEM 2.7
Situation: Air is at an absolute pressure of % = 600 kPa and a temperature of& = 50oC.
Find: (a) Specic weight, and (b) density
Properties: From Table A.2, " = 287 Jkg·K !
APPROACH
First, apply the ideal gas law to nd density. Then, calculate specic weight using( = #)!
ANALYSIS
Ideal gas law
#air =*
"&
=600' 000
287(50 + 273)
= 6.47 kg/m3
Specic weight
(air = #air × )= 6!47× 9!81= 63.5 N/m3
7
PROBLEM 2.8
Situation: Consider a mass of air with a volume of 1 cubic mile.
Find: Mass of air in a volume of 1 mi3. Express the answer using units of slugs andkg.
Properties: From Table A.2, #air = 0!00237 slugs/ft3!
Assumptions: The density of air is the value at sea level for standard conditions.
ANALYSIS
Units of slugs
+ = #,
= 0!00237 slugft3× (5280)3 ft3
+ = 3!49× 108 slugs
Units of kg
+ =¡3!49× 108 slug
¢×µ14!59
kg
slug
¶
+ = 5!09× 109 kg
COMMENTS
The mass will probably be somewhat less than this because density decreases withaltitude.
8
PROBLEM 2.9
Situation: This problem involves the e!ects of temperature on the properties of air.The application is a bicyclist.
Find: a.) Plot air density versus temperature for a range of -10oC to 50oC.b.) Plot tire pressure versus temperature for the same temperature range.
Properties: From Table A.2, "air = 287 J/kg/K.
Assumptions: For part b, assume that the bike tire was initially inated to %tire = 450kPa, abs at & = 20oC.
APPROACH
Apply the ideal gas law.
ANALYSIS
Ideal gas law
# =%
"&=
101000
287× (273 + & )
Temperature (o C)
-20 -10 0 10 20 30 40 50 601.05
1.10
1.15
1.20
1.25
1.30
1.35
1.40
Den
sity
(kg/
m)3
with density constant
% = %!&
&!
9
Temperature, oC
-20 -10 0 10 20 30 40 50 60380
400
420
440
460
480
500
520
Tire
pre
ssur
e, k
Pa
10
PROBLEM 2.10
Situation: A design team needs to know how much CO2 is needed to inate a rubberraft.Raft is shown in the sketch below.Ination pressure is 3 psi above local atmospheric pressure. Thus, ination pressureis 17.7 psi = 122 kPa.
Find: (a)Estimate the volume of the raft.(b) Calculate the mass of CO2 in grams to inate the raft.
Properties: From Table A.2, RCO2 = 189 J/kgK.
Assumptions: 1.) Assume that the CO2 in the raft is at 62 !F = 290K!2.) Assume that the volume of the raft can be approximated by a cylinder of diameter0.45 m and a length of 16 m (8 meters for the length of the sides and 8 meters forthe lengths of the ends plus center tubes).
APPROACH
Mass is related to volume by / = ##Volume. Density can be found using the idealgas law.
ANALYSIS
Volume contained in the tubes.
!,— =012
4× 2
=
µ0 × 0!452
4× 16
¶m3
= 2!54m3
!,— = 2!54m3
Ideal gas law
# =%
"&
=122' 000N$m2
(189 J$ kg · K) (290K)= 2!226 kg/m3
11
Mass of CO2
/ = #×Volume=
¡2!226 kg/m3
¢×¡2!54m3
¢
= 5!66 kg
/ = 5!66 kg
COMMENTS
The nal mass (5.66 kg = 12.5 lbm) is large. This would require a large and poten-tially expensive CO2 tank. Thus, this design idea may be impractical for a productthat is driven by cost.
12
PROBLEM 2.11
Situation: The application is a helium lled balloon of radius 3 = 1!3m!% = 0!89 bar = 89 kPa!& = 22 !C = 295!2K!
Find: Weight of helium inside balloon.
Properties: From Table A.2, RHe = 2077 J/kg·K.
APPROACH
Weight is given by . = /)! Mass is related to volume by / = ##Volume. Densitycan be found using the ideal gas law.
ANALYSIS
Volume in a sphere
Volume =4
3033
=4
301!33m3
= 9!203m3
Ideal gas law
# =%
"&
=89' 000N$m2
(2077 J$ kg · K) (295!2K)= 0!145 kg/m3
Weight of helium
. = #×Volume× )=
¡0!145 kg/m3
¢×¡9!203m3
¢×¡9!81m$ s2
¢
= 13!10N
Weight = 13.1 N
13
PROBLEM 2.12
Situation: In the wine and beer industries, fermentation involves glucose (-641256)being converted to ethyl alcohol (-43-4254) plus carbon dioxide gas that escapesfrom the vat.
-641256 $ 2(-43-4254) + 2(-52)
The initial specic gravity is 1.08.Specic gravity of alcohol is 0.80.Saturated solution (water + sugar) has a specic gravity of 1.59.
Find: (a.) Final specic gravity of the wine.(b.) Percent alcohol content by volume after fermentation.
Assumptions: All of the sugar is converted to alcohol.
APPROACH
Imagine that the initial mixture is pure water plus saturated sugar solution and thenuse this visualization to nd the mass of sugar that is initially present (per unitof volume). Next, apply conservation of mass to nd the mass of alcohol that isproduced (per unit of volume). Then, solve for the problem unknowns.
ANALYSIS
The initial density of the mixture is
#"#$ =#%,% + #&,&
,!
where #% and #& are the densities of water and sugar solution (saturated), ,! is theinitial volume of the mixture, and ,& is the volume of sugar solution. The totalvolume of the mixture is the volume of the pure water plus the volume of saturatedsolution
,% + ,& = ,!
The specic gravity is initially 1.08. Thus
6# =#"#$#%
= (1",&,!) +
#&#%
,&,!
1!08 = (1",&,!) + 1!59
,&,!
,&,!
= 0!136
Thus, the mass of sugar per unit volume of mixture
/&
,!= 1!59× 0!136
= 0!216 kg/m3
14
The molecular weight of glucose is 180 and ethyl alcohol 46. Thus 1 kg of glucoseconverts to 0.51 kg of alcohol so the nal density of alcohol is
/'
,!= 0!216× 0!51
= 0!110 kg/m3
The density of the nal mixture based on the initial volume is
/(
,!= (1" 0!136) + 0!110
= 0!974 kg/m3
The nal volume is altered because of conversion
,(,!
=/%
#%,!+/'
#',!
=,%,!+0!51/&
#',!
=,%,!+0!51#&#'
,&,!
= 0!864 +0!51× 1!59
0!8× 0!136
= 1!002
The nal density is
/(
,(=
/(
,!×,!,(
= 0!974×1
1!002= 0!972 kg/m3
The nal specic gravity is6( = 0!972
The alcohol content by volume
,',(
=/'
#',(
=/'
,!
1
#'
,!,(
= 0!110×1
0!8×
1
1!002= 0!137
Thus,Percent alcohol by volume = 13.7%
15
PROBLEM 2.13
Situation: This problem involves the viscosity and density of air and water.
Find: (a)Change in viscosity and density of water for a temperature change of 10!Cto 70!C.(b)Change in viscosity and density of air for a temperature change of 10!C to 70!C.
APPROACH
For water, use data from Table A.5. For air, use data from Table A.3
ANALYSIS
Water
770 = 4!04× 10"4N·s/m2710 = 1!31× 10"3N·s/m2
!7=-9. 06×10"4 8 · 9$/2
#70 = 978 kg/m3
#10 = 1000 kg/m3
!#=-22 kg/m3
Air
770 = 2!04× 10"5 N · s/m2
710 = 1!76× 10"5 N · s/m2
!7 = 2! 8× 10"6 8 ·9$/2
#70 = 1!03 kg/m3
#10 = 1!25 kg/m3
!# = "0!22 kg/m3
16
PROBLEM 2.14
Situation: Air at 10oC and 60oC.
Find: Change in kinematic viscosity from 10oC to 60oC.
Properties: From table A.3, :60 = 1!89× 10"5 m2/s, :10 = 1!41× 10"5 m2/s.
APPROACH
Use properties found in table A.3.
ANALYSIS
!;air,10#60 = (1!89" 1!41)× 10"5 = 4.8×10"6 m2/s
17
PROBLEM 2.15
Situation: This problem involves viscosity of SAE 10W-30 oil, kerosene and water.
Find: Dynamic and kinematic viscosity of each uid at 38!C.
APPROACH
Use property data found in Table A.4, Fig. A.2 and Table A.5.
ANALYSIS
Oil (SAE 10W-30) kerosene water
7(N · s/m2) 6.7×10"2 1.4×10"3 (Fig. A-2) 6.8×10"4
#(kg/m3) 880 993
:(m2/s) 7.6×10"5 1.7×10"6 (Fig. A-2) 6.8×10"7
18
PROBLEM 2.16
Situation: Air and water at 20!C.
Find: (a)Ratio of dynamic viscosity of air to that of water.(b)Ratio of kinematic viscosity of air to that of water.
Properties: From Table A.3, 7air,20!) = 1!81× 10"5 N·s/m2; : = 1!51× 10"5 m2/sFrom Table A.5, 7water,20!) = 1!00× 10"3 N·s/m2; : = 1!00× 10"6 m2/s
ANALYSIS
7air$7water =1!81× 10"5N · s$m2
1!00× 10"3N · s$m2= 1.81×10"2
:air$:water =1!51× 10"5m2$ s1!00× 10"6m2$ s
= 15.1
19
PROBLEM 2.17 Computer Problem - no solution is provided.
20
PROBLEM 2.18
Situation: Sutherland’s equation and the ideal gas law describe behaviors of commongases.
Find: Develop an expression for the kinematic viscosity ratio :$:!, where : is attemperature & and pressure %!
Assumptions: Assume a gas is at temperature &! and pressure %!, where the subscript”o” denes the reference state.
APPROACH
Combine the ideal gas law and Sutherland’s equation.
ANALYSIS
The ratio of kinematic viscosities is
:
:!=
7
7!
#!#=
µ&
&!
¶3*2&! + 6
& + 6
%!%
&
&!
++!=,!
,
³--!
´5*2-!+.-+.
21
PROBLEM 2.19
Situation: The viscosity of air is 7air (15o-) = 1!78× 10"5 N·s/m2!
Find: Dynamic viscosity 7 of air at 200 !C using Sutherland’s equation.
Properties: From Table A.2, 6 = 111<.
ANALYSIS
Sutherland’s equation
7
7!=
µ&
&!
¶3*2&! + 6
& + 6
=
µ473
288
¶3*2288 + 111
473 + 111= 1!438
Thus
7 = 1!4387!= 1!438×
¡1!78× 10"5N · s$m2
¢
7 = 2!56× 10"5 N·s/m2
22
PROBLEM 2.20
Situation: Kinematic viscosity of methane at 15!C and 1 atm is 1!59× 10"5m2$ s!
Find: Kinematic viscosity of methane at 200!C and 2 atm.
Properties: From Table A.2, 6 = 198 K.
APPROACH
Apply the ideal gas law and Sutherland’s equation.
ANALYSIS
: =7
#:
:!=
7
7!
#!#
Ideal-gas law:
:!=7
7!
%!%
&
&!
Sutherland’s equation
:
:!=%!%
µ&
&!
¶5*2&! + 6
& + 6
so
:
:!=
1
2
µ473
288
¶5*2288 + 198
473 + 198= 1!252
and
: = 1!252× 1!59× 10"5 m2/s
= 1!99× 10"5m2$ s
23
PROBLEM 2.21
Situation: Nitrogen at 59!F has a dynamic viscosity of 3!59× 10"7 lbf · s$ ft2!
Find: 7 at 200oF using Sutherland’s equation.
Properties: From Table A.2, 6 =192!R.
ANALYSIS
Sutherland’s equation
7
7!=
µ&
&!
¶3*2&! + 6
& + 6
=
µ660
519
¶3*2519 + 192
660 + 192= 1!197
7 = 1!197×µ3!59× 10"7
lbf · sft2
¶
= 4! 297× 10"7
7 = 4!30× 10"7 lbf-s/ft2
24
PROBLEM 2.22
Situation: Helium at 59!F has a kinematic viscosity of 1!22× 10"3 ft2$ s!
Find: Kinematic viscosity at 30oF and 1.5 atm using Sutherland’s equation.
Properties: From Table A.2, 6 =143!R.
APPROACH
Combine the ideal gas law and Sutherland’s equation.
ANALYSIS
:
:!=
%!%
µ&
&!
¶5*2&! + 6
& + 6
=1!5
1
µ490
519
¶5*2519 + 143
490 + 143= 1!359
: = 1!359×µ1!22× 10"3
ft2
s
¶
= 1! 658× 10"3ft2
s
: = 1!66× 10"3 ft2$ s
25
PROBLEM 2.23
Situation: Information about propane is provided in the problem statement.
Find: Sutherland’s constant.
ANALYSIS
Sutherland’s equation
6
&!=
//!
¡-!-
¢1*2 " 1
1" //!
¡-!-
¢3*2
Also
7
7!= 1!72
&!&
=373
673
Thus
6
&!= 0!964
6 = 360 K
26
PROBLEM 2.24
Situation: Information about ammonia is provided in the problem statement.
Find: Sutherland’s constant.
ANALYSIS
Sutherland’s equation
6
&!=
//!
¡-!-
¢1*2 " 1
1" //!
¡-!-
¢3*2 (1)
Calculations
7
7!=
3!46× 10"7
2!07× 10"7= 1!671 (a)
&!&
=528
852= 0!6197 (b)
Substitute (a) and (b) into Eq. (1)
6
&!= 1!71
6 = 903 oR
27
PROBLEM 2.25
Situation: Information about SAE 10W30 motor oil is provided in the problem state-ment.
Find: The viscosity of motor oil at 60 !C' 7(60oC), using the equation 7 = -=0*- .
APPROACH
Use algebra and known values of viscosity (7) to solve for the constant b. Then,solve for the unknown value of viscosity.
ANALYSIS
Viscosity variation of a liquid can be expressed as 7 = -=0*- ! Thus, evaluate 7 attemperatures & and &! and take the ratio:
7
7!= exp
·>(1
&"1
&!)
¸
Take the logarithm and solve for >!
> =ln (7$7!)
( 1-" 1
-!)
Data
7$7! = 0!011$0!067 = 0!164
& = 372
&! = 311
Solve for >> = 3430 (K)
Viscosity ratio at 60oC
7
7!= exp[3430(
1
333"
1
311)
= 0!4833
7 = 0!4833× 0!067
= 0!032 N · s$m2
28
PROBLEM 2.26
Situation: Information about grade 100 aviation oil is provided in the problem state-ment
Find: 7(150oF), using the equation 7 = -=0*- .
APPROACH
Use algebra and known values of viscosity (7) to solve for the constant b. Then,solve for the unknown value of viscosity.
ANALYSIS
Viscosity variation of a liquid can be expressed as 7 = -=0*- ! Thus, evaluate 7 attemperatures & and &! and take the ratio:
7
7!= exp
·>(1
&"1
&!)
¸
Take the logarithm and solve for >
> =ln (7$7!)
( 1-" 1
-!)
Data
7
7!=
0!39× 10"3
4!43× 10"3= 0!08804
& = 670
&! = 560
Solve for >> = 8293 (!R)
Viscosity ratio at 150!F
7
7!= exp[8293(
1
610"
1
560)
= 0!299
7 = 0!299×µ4!43× 10"3
lbf · sft2
¶
= 1!32× 10"3 lbf-s/ft2
29
PROBLEM 2.27
Situation: This problem involves the creation of a computer program to nd Suther-land’s constant and application to CO2!
Find: Develop a computer program and carry out the activities described in thetextbook.
ANALYSIS
Sutherland’s constant
6
273=
//!
¡273-
¢1*2 " 1
1" //!
¡273-
¢3*2 (1)
Program Eq. (1), process data and take the average
6 = 127 K
Dene error
error = 100×
¯¯¯
//!" /
/!|1'21
//!
¯¯¯
The results are
T(K) 260 270 280 290 300 350 500 1000 1500//!|1'21 .9606 .991 1.021 1.050 1.079 1.217 1.582 2.489 3.168
error(%) .013 .039 .084 .118 .108 .366 .486 1.17 3.56
COMMENTS
The error is less than 0.5% for temperatures up to 500 K. The error is greater than3.5% for temperatures above 1500K.
30
PROBLEM 2.28
Situation: Oil (SAE 10W30) lls the space between two plates. Plate spacing is!? = 1$8 = 0!125 in!Lower plate is at rest. Upper plate is moving with a speed @ = 25 ft$ s.
Find: Shear stress.
Properties: Oil (SAE 10W30 @ 150 !F) from Figure A.2: 7 = 5!2× 10"4 lbf·s$ft2!
Assumptions: 1.) Assume oil is a Newtonian uid. 2.) Assume Couette ow (linearvelocity prole).
ANALYSIS
Rate of strain
A@
A?=
!@
!?
=25 ft$ s
(0!125$12) ft
= 2400 s"1
Newton’s law of viscosity
B = 7
µA@
A?
¶
=
µ5!2× 10"4
lbf · sft2
¶×µ2400
1
s
¶
= 1! 248lbf
ft2
B = 1!25 lbf$ ft2
31
PROBLEM 2.29
Situation: Air and water at 40 !C and absolute pressure of 170 kPa
Find: Kinematic and dynamic viscosities of air and water.
Properties: Air data from Table A.3, 7air = 1!91× 10"5 N·s/m2Water data from Table A.5, 7water = 6!53× 10"4 N·s/m2, #water = 992 kg/m3.
APPROACH
Apply the ideal gas law to nd density. Find kinematic viscosity as the ratio ofdynamic and absolute viscosity.
ANALYSIS
A.) AirIdeal gas law
#air =%
"&
=170' 000
287× 313!2= 1!89 kg/m3
7air = 1!91× 10"5 N· sm2
: =7
#
=1!91× 10"5
1!89
:air = 10!1× 10"6m2$ s
B.) water7water = 6!53× 10"5 N·s/m2
: =7
#
: =6!53× 10"4
992
:water = 6!58× 10"7 m2/s
32
PROBLEM 2.30
Situation: Water ows near a wall. The velocity distribution is
@(?) = C³?>
´1*6
where C = 10m$ s, > = 2mm and ? is the distance from the wall in units of mm.
Find: Shear stress in the water at ? = 1 mm.
Properties: Table A.5 (water at 20 !C): 7 = 1!00× 10"3N · s$m2.
ANALYSIS
Rate of strain (algebraic equation)
A@
A?=
A
A?
·C³?>
´1*6¸
=C
>1*61
6?5*6
=C
6>
µ>
?
¶5*6
Rate of strain (at ? = 1mm)
A@
A?=
C
6>
µ>
?
¶5*6
=10m$ s
6× 0!002m
µ2mm
1mm
¶5*6
= 1485 s"1
Shear Stress
B 3=1mm = 7A@
A?
=
µ1!00× 10"3
N · sm2
¶¡1485 s"1
¢
= 1!485Pa
B (? = 1mm) = 1!49Pa
33
PROBLEM 2.31
Situation: Information is provided in problem statement.
Find: Shear stress at walls.
ANALYSIS
Velocity distribution@ = 100?(0!1" ?) = 10? " 100?2
Rate of strain
A@$A? = 10" 200?(A@$A?)3=0 = 10 s"2 (A@$A?)3=041 = "10 s"1
Shear stress
B 0 = 7A@
A?= (8× 10"5)× 10 = 8× 10"4 lbf/ft2
B 041 = 8× 10"4 lbf/ft2
Plot
0.00
0.02
0.04
0.06
0.08
0.10
Dis
tanc
e
Velocity
34
PROBLEM 2.32
Situation: Information is provided in problem statement.
Find: (a) Maximum and minimum shear stress.(b) Maximum shear stress at wall.
ANALYSIS
B = 7A,$A?
Bmax % 7(!,$!?) next to wall
Bmax = (10"3N · s/m2)((1 m/s)$0!001 m) = 1.0 N/m2
The minimum shear stress will be zero, midway between the two walls, where thevelocity gradient is zero.
35
PROBLEM 2.33
Situation: Glycerin is owing in between two stationary plates. The plate spacing isD = 5cm!The velocity distribution is
@ = "1
27
A%
AE
¡D? " ?2
¢
where the pressure gradient is A%$AE = "1!6 kN$m3Pressure gradient
Find:a.) Velocity and shear stress at12 mm from wall (i.e. at ? = 12mm).b.) Velocity and shear stress at the wall (i.e. at ? = 0mm).
Properties: Glycerin at 20 !C from Table A.4: 7 = 1!41N · s$m2.
APPROACH
Find velocity by direct substitution into the specied velocity distribution. Findshear stress using B = 7 (A@$A?), where the rate-of-strain (i.e. the derivative A@$A?)is found by di!erentiating the velocity distribution.
ANALYSIS
a.) Velocity (at ? = 12mm)
@ = "1
27
A%
AE
¡D? " ?2
¢
= "1
2 (1!41N · s$m2)¡"1600N$m3
¢ ¡(0!05m) (0!012m)" (0!012m)2
¢
= 0!258 7m
s
@ (? = 12mm) = 0!259m$ s
Rate of strain (general expression)
A@
A?=
A
A?
µ"1
27
A%
AE
¡D? " ?2
¢¶
=
µ"1
27
¶µA%
AE
¶A
A?
¡D? " ?2
¢
=
µ"1
27
¶µA%
AE
¶(D " 2?)
36
Rate of strain (at ? = 12mm)
A@
A?=
µ"1
27
¶µA%
AE
¶(D " 2?)
=
µ"
1
2 (1!41N · s$m2)
¶µ"1600
N
m3
¶(0!05m" 2× 0!012m)
= 14!75 s"1
Shear stress
B = 7A@
A?
=
µ1!41
N · sm2
¶¡14!75 s"1
¢
= 20! 798Pa
B (? = 12mm) = 20!8Pa
b.) Velocity (at ? = 0mm)
@ = "1
27
A%
AE
¡D? " ?2
¢
= "1
2 (1!41N · s$m2)¡"1600N$m3
¢ ¡(0!05m) (0m)" (0m)2
¢
= 0!00m
s
@ (? = 0mm) = 0m$ s
Rate of strain (at ? = 0mm)
A@
A?=
µ"1
27
¶µA%
AE
¶(D " 2?)
=
µ"
1
2 (1!41N · s$m2)
¶µ"1600
N
m3
¶(0!05m" 2× 0m)
= 28!37 s"1
Shear stress (at ? = 0mm)
B = 7A@
A?
=
µ1!41
N · sm2
¶¡28!37 s"1
¢
= 40!00Pa
B (? = 0mm) = 40!0Pa
COMMENTS
37
1. As expected, the velocity at the wall (i.e. at ? = 0) is zero due to the no slipcondition.
2. As expected, the shear stress at the wall is larger than the shear stress awayfrom the wall. This is because shear stress is maximum at the wall and zeroalong the centerline (i.e. at ? = D$2).
38
PROBLEM 2.34
Situation: Laminar ow occurs between two parallel plates–details are provided inthe problem statement.
Find: Is the maximum shear greater at the moving plate or the stationary plate?
ANALYSIS
B = 7A@$A?
7A@$A? = "7(1$27)(A%$A9)(4 " 2?) + @57$4Evaluate B at ? = 4 :
B6 = "(1$2)(A%$A9)(4 " 24) + @57$4= (1$2)(A%$A9)4 + @57$4
Evaluate B at ? = 0
B 0 = "(1$2)(A%$A9)4 + @57$4
Observation of the velocity gradient lets one conclude that the pressure gradient A%$A9is negative. Also @5 is negative. Therefore |B7| F |B 0| ! The maximum shear stressoccurs at ? = 4!
Maximum shear stress occur along the moving plate where ? = 4 .
39
PROBLEM 2.35
Situation: Laminar ow occurs between two parallel plates–details are provided inthe problem statement.
Find: Position (?) of zero shear stress.
ANALYSIS
B = 7A@$A?
= "7(1$27)(A%$A9)(4 " 2?) + @57$4= "(1$2)(A%$A9)(4 " 2?) + @57$4
Set B = 0 and solve for ?
0 = "(1$2)(A%$A9)(4 " 2?) + @57$4
? = (4$2)" (7@5$(4A%$A9))
40
PROBLEM 2.36
Situation: Laminar ow occurs between two parallel plates–details are provided inthe problem statement.
Find: Derive an expression for plate speed (@5) to make the shear stress zero at ? = 0!
ANALYSIS
From solution to 2.34
B = 7A@$A? = 0 at ? = 0
A@$A? = "(1$27)(A%$A9)(4 " 2?) + @5$4Then, at ? = 0 : A@$A? = 0 = "(1$27)(A%$A9)4 + @5$4
Solve for @5 : @5 = (1$27)(A%$A9)42
Note : because A%$A9 G 0' @5 G 0!
41
PROBLEM 2.37
Situation: A damping device is described in the problem statement.
Find: Torque on shaft.
Properties: From Table A.4, 7(38oC)=3!6× 10"2 N·s/m2!
ANALYSIS
Rd! !R
"R
Rsin
A& = 3AH
A& = 3BAI
where B = 7(A,$A?) = 7(!,$!")
= 7(J" sin K$!")
= 3!6× 10"2 N · s/m2)(10× 20$60) rad/s(0!05 m sin K$10"3 m)= 1!885 sin K N/m2
AI = 20" sin K"AK
= 20"2 sin K"AK
= 20"2 sin KAK
3 = " sin K
Then
A& = " sin K(1!885 sin K)(20"2 sin KAK)
A& = 11!84"3 sin3 KAK
& = 11!84"38Z
0
sin3 KAK
= 11!84(0!05)3["(1$3) cos K(sin2 K + 2)]80= 11!84(0!05)3["(1$3)("1)(2)" ("1$3)(1)(2)]
Torque =1!97× 10"3N · m
42
PROBLEM 2.38
Situation: Oxygen at 50 !F and 100 !F.
Find: Ratio of viscosities: /100/50.
ANALYSIS
Because the viscosity of gases increases with temperature 7100$750 F 1. Correctchoice is (c) .
43
PROBLEM 2.39
Situation: This problem involves a cylinder falling inside a pipe that is lled with oil.
Find: Speed at which the cylinder slides down the pipe.
Properties: SAE 20W oil from Figure A.2: 7(10oC) = 0.35 N·s/m2!
ANALYSIS
B = 7A,$A?
.$(0AL) = 7,fall$[(1 " A)$2],fall = . (1 " A)$(20AL7),fall = 20(0!5× 10"3)$(20 × 0!1× 0!2× 3!5× 10"1)
= 0.23 m/s
44
PROBLEM 2.40
Situation: This problem involves a cylinder falling inside a pipe–details are providedin problem statement.
Find: Weight of cylinder.
Properties: From Figure A.2, 7(10oC)=0.35 N·s/m2!
ANALYSIS
Newton’s second law". + HB = /C
". + 0AL7,$[(1 " A)$2] = (.$)) C". + (0 × 0!1× 0!2× 3!5× 10"1, )$(0!5× 10"3$2) =.C$9!81
Substituting , = 0!5 m/s and C = 14 m/s2 and solving yields . = 18!1N
45
PROBLEM 2.41
Situation: A disk is rotated very close to a solid boundary–details are provided inproblem statement.
Find: (a) Ratio of shear stress at 3 = 2 cm to shear stress at 3 = 3 cm.(b) Speed of oil at contact with disk surface.(c) Shear stress at disk surface.
Assumptions: Linear velocity distribution: A,$A? = ,$? = J3$?!
ANALYSIS
B = 7A,$A? = 7J3$?
B 2$B 3 = (7× 1× 2$?)$(7× 1× 3$?) = 2$3 = 0.667
, = J3 = 2× 0!03 = 0.06 m/s
B = 7A,$A? = 0!01× 0!06$0!002 = 0.30 N/m2
46
PROBLEM 2.42
Situation: A disk is rotated very close to a solid boundary–details are provided inproblem statement.
Find: Torque to rotate disk.
Assumptions: Linear velocity distribution: A,$A? = ,$? = J3$?!
ANALYSIS
B = 7A,$A?
B = 7J3$?
= 0!01× 5× 3$0!002 = 253 N/m2
A Torque = 3BAI
= 3(103)203A3 = 50033A3
Torque =
0405Z
0
50033A3 = 50034$4¯0450
Torque =2.45×10"4 N·m
47
PROBLEM 2.43
Situation: In order to provide damping for an instrument, a disk is rotated in acontainer of oil.
Find: Derive an equation for damping torque as a function of 1'6' J and 7!
APPROACH
Apply the Newton’s law of viscosity.
ANALYSIS
Shear stress
B = 7A,
A?
=73J
9
Find di!erential torque–on an elemental strip of area of radius 3 the di!erentialshear force will be BAI or B(203A3). The di!erential torque will be the product ofthe di!erential shear force and the radius 3.
A&one side = 3[B(203A3)]
= 3[(73J$9)(203A3)]
= (207J$9)33A3
A&both sides = 4(307J$9)33A3
Integrate
& =
9*2Z
0
(407J$9)33A3
= (1/16)07J14$9
48
PROBLEM 2.44
Situation: One type of viscometer involves the use of a rotating cylinder inside a xedcylinder. The temperature range is 50 to 200!F.
Find: (a) Design a viscometer that can be used to measure the viscosity of motor oil.
Assumptions:
1. Motor oil is SAE 10W-30. Data from Fig A-2: 7 will vary from about 2 ×10"4lbf-s/ft2 to 8× 10"3lbf-s/ft2!
2. Assume the only signicant shear stress develops between the rotating cylinderand the xed cylinder.
3. Assume we want the maximum rate of rotation (J) to be 3 rad/s.
ANALYSIS
One possible design solution is given below.Design decisions:
1. Let M = 4!0 in. = 0.333 ft
2. Let I.D. of xed cylinder = 9.00 in. = 0.7500 ft.
3. Let O.D. of rotating cylinder = 8.900 in. = 0.7417 ft.
Let the applied torque, which drives the rotating cylinder, be produced by a forcefrom a thread or small diameter monolament line acting at a radial distance 3&!Here 3& is the radius of a spool on which the thread of line is wound. The appliedforce is produced by a weight and pulley system shown in the sketch below.
h rc
"rW
Pulley
The relationship between 7' 3&' J' M' and . is now developed.
& = 31H& (1)
where & = applied torque31 = outer radius of rotating cylinder
49
H& = shearing force developed at the outer radius of the rotating cylinder but H& =BI& where I& = area in shear = 2031M
B = 7A,$A? % 7!,$!3 where !, = 31J and !3 = spacing
Then & = 31(7!,$!3)(2031M)
= 317(31J$!3)(2031M) (2)
But the applied torque & =.3& so Eq. (2) become
.3& = 3317J(20)M$!3
Or
7 = (.3&!3)$(20JM331) (3)
The weight. will be arbitrarily chosen (say 2 or 3 oz.) and J will be determined bymeasuring the time it takes the weight to travel a given distance. So 3&J = ,fall orJ = ,fall$3&! Equation (3) then becomes
7 = (.$,()(32&$3
31)(!3$(20M))
In our design let 3& = 2 in. = 0.1667 ft. Then
7 = (.$H()(0!16672$!37083)(0!004167$(20 × !3333)
7 = (.$,()(!02779$!05098)
7 = (.$,()(1!085× 10"3) lbf · s$ft2
Example: If . = 2oz. = 0.125lb. and ,( is measured to be 0.24 ft/s then
7 = (0!125$0!24)(1!085× 10"3)= 0!564× 10"4 lbf · s$ ft2
COMMENTS Other things that could be noted or considered in the design:
1. Specify dimensions of all parts of the instrument.
2. Neglect friction in bearings of pulley and on shaft of cylinder.
3. Neglect weight of thread or monolament line.
4. Consider degree of accuracy.
5. Estimate cost of the instrument.
50
PROBLEM 2.45
Situation: Water in a 1000 cm3 volume is subjected to a pressure of 2× 106N$m2!
Find: Volume after pressure applied.
Properties: From Table A.5, N = 2!2× 109 Pa
ANALYSIS
Modulus of elasticity
N = "!%,—!,—
!,— = "!%
N,—
= "·(2× 106) Pa(2!2× 109) Pa
¸1000 cm3
= "0!9091 cm3
Final volume
,—(#:'2 = ,—+!,—
= (1000" 0!9091) cm3
= 999!1 cm3
,—(#:'2 = 999 cm3
51
PROBLEM 2.46
Situation: Water is subjected to an increase in pressure.
Find: Pressure increase needed to reduce volume by 1%.
Properties: From Table A.5, N = 2!2× 109 Pa!
ANALYSIS
Modulus of elasticity
N = "!%,—!,—
!% = N!,—,—
= "¡2!2× 109 Pa
¢µ"0!01× ,—,—
¶
=¡2!2× 109 Pa
¢(0!01)
= 2! 2× 107 Pa
!% = 22MPa
52
PROBLEM 2.47
Situation: Very small spherical droplet of water.
Find: Pressure inside.
ANALYSIS
Refer to Fig. 2-6(a). The surface tension force, 203O, will be resisted by the pressureforce acting on the cut section of the spherical droplet or
%(032) = 203O
% = 2O$3
= 4O$A
53
PROBLEM 2.48
Situation: A spherical soap bubble has an inside radius ", a wall-thickness P, andsurface tension O.
Find: (a) Derive a formula for the pressure di!erence across the bubble(b) Pressure di!erence for a bubble with a radius of 4 mm.
Assumptions: The e!ect of thickness is negligible, and the surface tension is that ofpure water.
APPROACH
Apply equilibrium, then the surface tension force equation.
ANALYSIS
Force balance
p
2 x 2 R# $
Surface tension force
XH = 0
!%0"2 " 2(20"O) = 0
!% = 4O$"
!%4mm rad. = (4× 7!3× 10"2 N/m)$0!004 m = 73.0 N/m2
54
PROBLEM 2.49
Situation: A water bug with 6 legs, each with a contact length of 5 mm, is balancedon the surface of a water pond.
Find: Maximum mass of bug to avoid sinking.
Properties: Surface tension of water, from Table A.5, O = 0!073 N/m.
APPROACH
Apply equilibrium, then the surface tension force equation.
ANALYSIS
Force equilibrium
Upward force due to surface tension = Weight of Bug
H- = /)
To nd the force of surface tension (H- ), consider the cross section of one leg of thebug:
!
F F
Surface tensionforce on oneside of leg
Cross sectionof bug leg
Assume is smallThen cos =1; F cos = F
!! !
Surface tension force
H- = (2$leg)(6 legs)OL
= 12OL
= 12(0!073 N/m)(0!005 m)
= 0!00438N
Apply equilibrium
H- "/) = 0
/ =H-)=0!00438N
9!81m2$ s
= 0!4465× 10"3 kg
/ = 0!447× 10"3 kg
55
PROBLEM 2.50
Situation: A water column in a glass tube is used to measure pressure.Part of the water column height is due to pressure in a pipe, and part is due tocapillary rise.Additional details are provided in the problem statement.
Find: Height of water column due to surface tension e!ects.
Properties: From Table A.5: surface tension of water is 0.005 lbf/ft.
ANALYSIS
Surface tension force
!M = 4O$((A) = 4× 0!005$(62!4× A) = 3!21× 10"4$A ft.A = 1$4 in. = 1$48 ft.; !M = 3!21× 10"4$(1$48) = 0!0154 ft. = 0.185 in.
A = 1$8 in. = 1$96 ft.; !M = 3!21× 10"4$(1$96) = 0!0308 ft. = 0.369 in.
A = 1$32 in. = 1$384 ft.; !M = 3!21× 10"4$(1$384) = 0!123 ft.= 1.48 in.
56
PROBLEM 2.51
Situation: Two vertical glass plates are spaced 1 mm apart.
Find: Capillary rise (M) between the plates.
Properties: From Table A.5, surface tension of water is 7!3× 10"2 N/m.
APPROACH
Apply equilibrium, then the surface tension force equation.
ANALYSIS
!
$$y
y
Equilibrium
XH3 = 0
Force due to surface tension = Weight of uid that has been pulled upward
(2L)O = (MLP) (
Solve for capillary rise (M)
2OL" MLP( = 0
M =2O
(P
M =2× (7!3× 10"2)9810× 0!0010
= 0!0149 m
= 14.9 mm
57
PROBLEM 2.52
Situation: A spherical water drop has a diameter of 1-mm.
Find: Pressure inside the droplet.
Properties: From Table A.5, surface tension of water is 7!3× 10"2 N/m
APPROACH
Apply equilibrium, then the surface tension force equation.
ANALYSIS
Equilibrium (half the water droplet)
Force due to pressure = Force due to surface tension
%I = O2
!%0"2 = 20"O
Solve for pressure
!% = 2O$"
!% = 2× 7!3× 10"2$(0!5× 10"3) = 292 N/m2
58
PROBLEM 2.53
Situation: A tube employing capillary rise is used to measure temperature of water.
Find: Size the tube (this means specify diameter and length).
APPROACH
Apply equilibrium and the surface tension force equation.
ANALYSIS
The elevation in a column due to surface tension is
!M =4O
(A
where ( is the specic weight and A is the tube diameter. For the change in surfacetension due to temperature, the change in column elevation would be
!M =4!O
(A=4× 0!01679810× A
=6!8× 10"6
A
The change in column elevation for a 1-mm diameter tube would be 6.8 mm . Spe-cial equipment, such the optical system from a microscope, would have to be used tomeasure such a small change in deection It is unlikely that smaller tubes made oftransparent material can be purchased to provide larger deections.
59
PROBLEM 2.54
Situation: A glass tube is immersed in a pool of mercury–details are provided in theproblem statement.
Find: Depression distance of mercury: A
APPROACH
Apply equilibrium and the surface tension force equation.
ANALYSIS
cos K0AO = !M(0A2
4
Solving for !M results in
!M =4 cos KO
(A
Substitute in values
!M =4× cos 40× 0!514
(13!6× 9810)× 0!001= 0!0118m
!M = 11!8mm
60
PROBLEM 2.55
Situation: A soap bubble and a droplet of water both with a diameter of 2mm, fallingin air. The value of surface tension is equal.
Find: Which has the greater pressure inside.
ANALYSIS
The soap bubble will have the greatest pressure because there are two surfaces (twosurface tension forces) creating the pressure within the bubble. The correct choice isa)
61
PROBLEM 2.56
Situation: A hemispherical drop of water at 20oC is suspended under a surface.
Find: Diameter of droplet just before separation
Properties: Table A.5 (water at 20 !C): ( = 9790N$m3'[for surface tension, seefootnote (2)] O = 0!073N$m! .
ANALYSIS
Equilibrium.
Weight of droplet = Force due to surface tensionµ013
12
¶( = (01)O
Solve for 1
12 =12O
(
=12× (0!073 N/m)9790 N/m3
= 8! 948× 10"5m2
1 = 9! 459× 10"3m
1 = 9!46mm
62
PROBLEM 2.57
Situation: Surface tension is being measured by suspending liquid from a ring witha mass of 10 grams, an outside diameter of 10 cm and an inside diameter of 9.5 cm.Force to pull ring is weight corresponding to 14 gms.
Find: Surface tension
ANALYSIS
Equilibrium.
(Upward force) = (Weight of uid) + (Force due to surface tension)
H = . + O(01# + 01!)
Solve for surface tension
O =H ".
0(1# +1!)
=(0!014" 0!010) kg× 9!81m$ s2
0(0!1 + 0!095)m
= 6! 405× 10"2kg
s2
O = 0!0641 N/m
63
PROBLEM 2.58
Situation: The boiling temperature of water decreases with increasing elevation.Change in vapor pressure with temperature is "341 kPa!)
!Atmospheric pressure (3000 m) is 69 kPa.
Find: Boiling temperature at an altitude of 3000 m.
Properties: Vapor pressure of water at 100!C is 101 kN$m2.
Assumptions: Assume that vapor pressure versus boiling temperature is a linearrelationship.
APPROACH
Develop a linear equation for boiling temperature as a function of elevation.
ANALYSIS
Let D& = "Boiling Temperature." Then, D& as a function of elevation is
D& (3000 m) = BT (0 m) +µ!D&
!%
¶!%
Thus,
D& (3000 m) = 100 !C+
µ"1!0 !C3!1 kPa
¶(101" 69) kPa
= 89! 677 !C
Boiling Temperature (3000 m) = 89!7 !C
64
PROBLEM 3.1
Situation: A Crosby gage tester is applied to calibrate a pressure gage.A weight of 140 N results in a reading of 200 kPa.The piston diameter is 30 mm.
Find: Percent error in gage reading.
APPROACH
Calculate the pressure that the gage should be indicating (true pressure). Comparethis true pressure with the actual pressure.
ANALYSIS
True pressure
%true =H
I
=140N
(0$4× 0!032) m2= 198' 049 kPa
Percent error
% Error =(%recorded " %true) 100
%true
=(200" 198) 100
198= 1!0101%
% Error = 1!01%
65
PROBLEM 3.2
Situation: Two hemispherical shells are sealed together.Exterior pressure is %atm = 14!5 psia! Interior pressure is 0.1patm!Inner radius is 6 in. Outer radius is 6.25 in.Seal is located halfway between the inner and outer radius.
Find: Force required to separate the two shells.
APPROACH
Apply equilibrium to a free body comprised of one shell plus the air inside.
ANALYSIS
Free body diagram
pinsideA
patmAFpull
Equilibrium.
PH3 = 0
Hpull + %#I" %atmI = 0
Solve for force
Hpull = (%atm " %#)I= (1" 0!1)
¡14!5 lbf$ in2
¢ ¡0 × 6!1252 in2
¢
= 1538 lbf
Hpull = 1540 lbf
66
PROBLEM 3.3
Situation: This is an applied problem. To work the problem, we recorded data froma parked vehicle. Relevant information:
• Left front tire of a parked VW Passat 2003 GLX Wagon (with 4-motion).
• Bridgestone snow tires on the vehicle.
• Ination pressure = 36 psig. This value was found by using a conventional"stick-type" tire pressure gage.
• Contact Patch: 5!88 in × 7!5 in. The 7.5 inch dimension is across the tread.These data were found by measuring with a ruler.
• Weight on the front axle = 2514 lbf. This data was recorded from a stickeron the driver side door jamb. The owners manual states that this is maximumweight (car + occupants + cargo).
Assumptions:
1. The weight on the car axle without a load is 2000 lbf. Thus, the load actingon the left front tire is 1000 lbf.
2. The thickness of the tire tread is 1 inch. The thickness of the tire sidewall is1/2 inch.
3. The contact path is at and rectangular.
4. Neglect any tensile force carried by the material of the tire.
Find:(a) Apply engineering principles to estimate the size of the contact patch.(b) Compare the estimated area of contact with the measured area of contact.
APPROACH
To estimate the area of contact, apply equilibrium to the contact patch.
ANALYSIS
Equilibrium in the vertical direction applied to a section of the car tire
%#I# = Hpavement
67
where %# is the ination pressure, I# is the area of the contact patch on the inside ofthe tire and Hpavement is the normal force due to the pavement. Thus,
I# =Hpavement%#
=1000 lbf
36 lbf$ in2
= 27!8 in2
Comparison. The actual contact patch has an area I! = 5!88 in×7!5 in = 44!1 in2!Using the assumed thickness of rubber, this would correspond to an inside contactarea of I! = 4!88 in× 5!5 in = 26!8 in2!Thus, the predicted contact area
¡27!8 in2
¢and the measured contact area
¡26!8 in2
¢
agree to within about 1 part in 25 or about 4%.
COMMENTS
The comparison between predicted and measured contact area is highly dependenton the assumptions made.
68
PROBLEM 3.4
Situation: An air chamber is described in the problem statement.
Find: Number of bolts required at section B-B.
Assumptions: Same force per bolt at B-B.
ANALYSIS
Hydrostatic force
H per bolt at I"I = %(0$4)12$20
%(0$4)12$20 = %(0$4)A2$Q
Q = 20× (A$1)2
= 20× (1$2)2
Q = 5
69
PROBLEM 3.5
Situation: A glass tube is inserted into water.Tube length is 2 = 10 cm! Tube diameter is A = 0!5mm!Depth of insertion is 2 cm. Atmospheric pressure is %atm = 100 kPa.
Find: Location of water line in tube.
Properties: Density of water is # = 1000 kg$m3! Surface tension (from Table A.5;see footnote 2) is O = 0!073N$m!
ANALYSIS
p Ai
p Al
2 cm l
Equilibrium (system is a very thin layer of uid)X
H; = 0
"%#I+ %<I+ O0A = 0 (1)
where %# is the pressure inside the tube and %< is the pressure in water at depth L!
Ideal gas law (constant temperature)
%#,"# = %atm,"tube%# = %atm(,"tube $,"#)
= %atm(0!10Itube$((!08 + L)(Itube))
%# = %atm(0!10$(!08 + L)) (2)
Hydrostatic equation (location 1 is the free surface of the water; location 2 is at adepth L)
%< = %atm + #)L (3)
Solve Eqs. (1) to (3) simultaneously for L' %# and %< (we used TK Solver)
L = 0!019233m
%# = 100772Pa
%< = 100189Pa
L = 1!92 cm
70
PROBLEM 3.6
Situation: A reservoir is described in the problem statement.
Find: Describe the gage pressure along a vertical line.
ANALYSIS
Correct graph is (b).
71
PROBLEM 3.7
Situation: A closed tank with Bourdon-tube gages tapped into it is described in theproblem statement.
Find:(a) Specic gravity of oil.(b) Pressure at C.
APPROACH
Apply the hydrostatic equation.
ANALYSIS
Hydrostatic equation (from oil surface to elevation B)
%= + (R= = %> + (R>
50' 000 N/m2 + (oil (1 m ) = 58,530 N/m2 + (oil (0 m)
(oil = 8530 N/m2
Specic gravity
6 =(oil(water
=8530 N/m2
9810 N/m2
6oil = 0!87
Hydrostatic equation (in water)
%1 = (%btm of oil) + (water (1m)
Hydrostatic equation (in oil)
%btm of oil = (58' 530Pa + (oil × 0!5m)
Combine equations
%1 = (58' 530Pa + (oil × 0!5m) + (water (1m)= (58' 530 + 8530× 0!5) + 9810 (1)= 72' 605 N/m2
%1 = 72!6 kPa
72
PROBLEM 3.8
Situation: A manometer is described in the problem statement.
Find: Water surface level in the left tube as compared to the right tube.
ANALYSIS
(a) The water surface level in the left tube will be higher because of greater surfacetension e!ects for that tube.
73
PROBLEM 3.9
Situation: A force is applied to a piston—additional details are provided in the problemstatement.
Find: Force resisted by piston.
APPROACH
Apply the hydrostatic equation and equilibrium.
ANALYSIS
Equilibrium (piston 1)
H1 = %1I1
%1 =H1I1
=4× 200N0 · 0!042m2
= 1!592× 105 Pa
Hydrostatic equation
%2 + (R2 = %1 + (R1
%2 = %1 + (6(water) (R1 " R2)= 1!592× 105 Pa +
¡0!85× 9810N$m3
¢("2m)
= 1!425× 105 Pa
Equilibrium (piston 2)
H2 = %2I2
=¡1!425× 105N$m2
¢Ã0 (0!1m)2
4
!
= 1119N
H2 = 1120 N
74
PROBLEM 3.10
Situation: A diver goes to a depth of 50 meters.
Find: (a) Gage pressure.(b) Ratio of pressure to normal atmospheric pressure.
APPROACH
Apply the hydrostatic equation.
ANALYSIS
Hydrostatic equation
% = (!R = 9790× 50= 489' 500 N/m2
% = 489!5 kPa gage
Calculate pressure ratio
%50%atm
=489!5 + 101!3
101!3
%50$%atm = 5!83
75
PROBLEM 3.11
Situation: Water and kerosene are in a tank. & = 20 !C!The water layer is 1 m deep. The kerosene layer is 0.5 m deep.
Find: Gage pressure at bottom of tank.
Properties: From Table A.5: (water = 9790 N/m3 (kerosene = 8010 N/m
3!
APPROACH
Apply the manometer equation.
ANALYSIS
Manometer equation (add up pressure from the top of the tank to the bottom of thetank).
%atm + (k (0!5m) + (w (1!0m) = %btm
Solve equation
%btm = 0 + (k (0!5m) + (w (1!0m)
=¡8010N$m3
¢(0!5m) +
¡9790N$m3
¢(1!0m)
= 13!8 kPa
%btm = 13!8 kPa-gage
76
PROBLEM 3.12
Situation: A hydraulic lift is being designed.Capacity = 20,000 lbf (10 tons). Weight of lift = 1000 lbf.Lift speed = 6 feet in 20 seconds. D = 2 to 8 inches.Piston pump data. Pressure range 200 to 3000 psig. Capacity = 5, 10 and 15 gpm.
Find: (a) Select a hydraulic pump capacity (gpm).(b) Select a cylinder diameter (1)
APPROACH
Apply equilibrium to nd the smallest bore diameter (D) that works. Then nd thelargest bore diameter that works by considering the lift speed requirement. Selectbore and pump combinations that meet the desired specications.
ANALYSIS
Equilibrium (piston)H = %I
where H = 21' 000 lbf is the load that needs to be lifted and % is the pressure on thebottom of the piston. Maximum pressure is 3000 psig so minimum bore area is
Imin =H
%max
=21' 000 lbf
3000 in2
= 7!0 in2
77
Corresponding minimum bore diameter is
1 =
r4
0I
1min = 2!98 in
The pump needs to provide enough ow to raise the lift in 20 seconds.
I!2 = ,!P
where I is the bore area, !2 is stroke (lift height), , is the volume/time of uidprovided by the pump, and !P is the time. Thus, the maximum bore area is
Imax =,!P
!2
Conversion from gallons to cubic feet¡ft3¢: 7.48 gal=1 ft3! Thus, the maximum
bore diameter for three pumps (to meet the lift speed specication) is given in thetable below.
pump (gpm) pump (cfm) A (ft2) Dmax (in)5 0.668 0.037 2.6110 1.337 0.074 3.6815 2.01 0.116 4.61
Since the minimum bore diameter is 2.98 in., the 5 gpm pump will not work. The 10gpm pump can be used with a 3 in. bore. The 15 gpm pump can be used with a 3or 4 in. bore.
1.) The 10 gpm pump will work with a bore diameter between 3.0 and 3.6 inches.
2.) The15 gpm pump will work with a bore diameter between 3.0 and 4.6 inches.
COMMENTS
1. These are preliminary design values. Other issues such as pressure drop in thehydraulic lines and valves would have to be considered.
2. We recommend selecting the 15 gpm pump and a 4.5 inch bore to providelatitude to handle pressure losses, and to reduce the maximum system pressure.
78
PROBLEM 3.13
Situation: A liquid occupies an open tank.At a depth of 5m' pressure is % = 75 kPa!
Find: Specic weight and specic gravity of the liquid.
APPROACH
Apply the hydrostatic equation between the top surface and a depth of 5 m.
ANALYSIS
Hydrostatic equation. (location 1 is on the top surface; location 2 is at depth of 5m).
%1(+ R1 =
%2(+ R2
%atm(+ 5m =
%2(+ 0m
Since %atm = 0
( =%2(5m)
=75' 000N$m2
(5m)
( = 15 kN$m3
Specic gravity
6 =15 kN$m3
9!8 kN$m3
6 = 1!53
79
PROBLEM 3.14
Situation: A tank with an attached manometer is described in the problem statement.
Find: Increase of water elevation in manometer.
Properties: From Table A.5, (w=9790 N/m3!
Assumptions: Ideal gas.
APPROACH
Apply the hydrostatic equation and the ideal gas law.
ANALYSIS
Ideal gas law (mole form; apply to air in the manometer tube)
%," = Q<&
Because the number of moles (Q) and temperature (& ) are constants, the ideal gasreduces to Boyle’s equation.
%1,"1 = %2,"2 (1)
State 1 (before air is compressed)
%1 = 100' 000 N/m2 abs
,"1 = 1 m×Itube(a)
State 2 (after air is compressed)
%2 = 100' 000 N/m2 + (w(1 m"!L)
,"2 = (1 m"!L)Itube(b)
Substitute (a) and (b) into Eq. (1)
%1,"1 = %2,"2¡100' 000N$m2
¢(1 m×Itube) =
¡100' 000 N/m2 + (w(1 m"!L)
¢(1 m"!L)Itube
100' 000 = (100' 000 + 9810 (1"!L)) (1"!L)
Solving for !L!L = 0!0826 m
80
PROBLEM 3.15
Situation: A tank tted with a manometer is described in the problem statement.
Find: Deection of the manometer.(!M)
APPROACH
Apply the hydrostatic principle to the water and then to the manometer uid.
ANALYSIS
Hydrostatic equation (location 1 is on the free surface of the water; location 2 is theinterface)
%1(water
+ R1 =%2(water
+ R2
0Pa
9810N$m3+ 0!15m =
%29810N$m3
+ 0m
%2 = (0!15m)¡9810N$m3
¢
= 1471!5Pa
Hydrostatic equation (manometer uid; let location 3 be on the free surface)
%2(man. uid
+ R2 =%3
(man. uid+ R3
1471!5Pa
3 (9810N$m3)+ 0m =
0Pa
(man. uid+!M
Solve for !M
!M =1471!5Pa
3 (9810N$m3)= 0!0500m
!M = 5!00 cm
81
PROBLEM 3.16
Situation: An odd tank is described in the problem statement.
Find:(a) Maximum gage pressure.(b) Where will maximum pressure occur.(c) Hydrostatic force on side C-D.
APPROACH
Apply the hydrostatic equation, and then the hydrostatic force equation.
ANALYSIS
Hydrostatic equation
0 + 4× (H2O + 3× 3(H2O = %max
%max = 13× 9' 810= 127' 530 N/m2
%max = 127!5 kPa
Answer ! Maximum pressure will be at the bottom of the liquid that has a specicgravity of 6 = 3.
Hydrostatic force
H)9 = %I
= (127' 530" 1× 3× 9810)× 1 m2
H)9 = 98!1 kN
82
PROBLEM 3.17
Situation: Sea water at a point 6 km deep is described in the problem statement.
Find: % di!erence in sea water density.
APPROACH
Apply the hydrostatic equation to nd the change in pressure. Use bulk modulus torelate change in pressure to change in density.
ANALYSIS
Hydrostatic equation
!% = ( (!M)
= 10' 070× 6× 103
Bulk modulus
N? = !%$(A#$#)
(A#$#) = !%$N@
= (10' 070× 6× 103)$(2!2× 109)= 27!46× 10"3
A#$# = 2!75%
83
PROBLEM 3.18
Situation: A steel pipe and chamber weigh 600 lbf!The dimension L = 2!5 ft!
Find: Force exerted on chamber by bolts (H>)
APPROACH
Apply equilibrium and the hydrostatic equation.
ANALYSIS
Equilibrium. (system is the steel structure plus the liquid within)
(Force exerted by bolts) + (Weight of the liquid) +
(Weight of the steel) = (Pressure force acting on the bottom of the free body )
H> +.liquid +.& = %2I2 (1)
Hydrostatic equation. (location 1 is on surface; location 2 at the bottom)
%1(+ R1 =
%2(liquid
+ R2
0 + 5L =%2
1!2(water+ 0
%2 = 1!2(water5L
= 1!2× 62!4× 5× 2!5= 936 psfg
Area
I2 =012
4=0L2
4
=0 × 2!52
4= 4!909 ft2
Weight of liquid
.liquid =
µI2L+
0A2
44L
¶(liquid
=
µI2L+
0L3
16
¶(1!2) (water
=
á4!909 ft2
¢(2!5 ft) +
0 (2!5 ft)3
16
!(1!2)
µ62!4
lbf
ft3
¶
= 1148! 7 lbf
84
Substitute numbers into Eq. (1)
H> + (1148! 7 lbf) + (600 lbf) =¡936 lbf$ ft2
¢ ¡4!909 ft2
¢
H> = 2846! 1
H> = 2850 lbf
85
PROBLEM 3.19
Situation: A metal dome with water is described in the problem statement.
Find: Force exerted by bolts.
APPROACH
Apply equilibrium and the hydrostatic equation.
ANALYSIS
Equilibrium (system is comprised of the dome/pipe apparatus plus the water within)
XH; = 0
Hbolt = Hpressure ".H2O ".metal (1)
Weight of water
.H2O = (2$3)063 × 62!4 + 12× (0$4)× (3$4)2 × 62!4= 28' 559 lbf
Hydrostatic equation (location 1 is on free surface; location 2 is at the bottom of thedome).
% (bottom) = (R = (6L
= (62!4) (6) (3)
= 1123!2 lbf$ ft2
Pressure force
HPressure = % (bottom)I
= (1123!2)¡0 · 62
¢
= 127' 030 lbf
Substitute numbers into Eq. (1)
Hbolt = Hpressure ".H2O ".metal
= 127' 030 lbf " 28' 559 lbf " 1300 lbf= 97171
Hbolt = 97' 200 lbf downward
86
PROBLEM 3.20
Situation: A metal dome with water is described in the problem statement.
Find: Force exerted by the bolts.
APPROACH
Apply equilibrium and the hydrostatic equation.
ANALYSIS
XH; = 0
%bottomIbottom + Hbolts ".H2O ".dome = 0
where %bottomIbottom = 4!8× 9' 810× 0 × 1!62 = 378!7 kN.H2O = 9' 810(3!2× (0$4)× 0!22 + (2$3)0 × 1!63)
= 85!1 kN
Then Hbolts = "378!7 + 85!1 + 6Hbolts = "287!6 kN
87
PROBLEM 3.21
Situation: A tank under pressure with a dome on top is described in the problemstatement.2 = 2 ft! 6 = 1!5! %= = 5 psig. .dome = 1000 lbf!
Find: (a) Vertical component of force in metal at the base of the dome.(b) Is the metal in tension or compression?
APPROACH
Apply equilibrium to a free body comprised of the dome plus the water within. Applythe hydrostatic principle to nd the pressure at the base of the dome.
ANALYSIS
Equilibrium
1000 lbf
WlFdFd
pB
XH; = 0 (1)
HA + %>I".liquid ".dome = 0 (4)
Hydrostatic equation%> + (R> = %= + (R=
%> = %= "¡(62B
¢6!R
= (5 psig)¡144 in2$ ft2
¢"¡62!4 lbf$ ft3
¢(1!5) (3 ft)
= 439!2 psfg
Weight of the liquid
.liquid =¡(62B
¢(6) (Volume)
=¡62!4 lbf$ ft3
¢(1!5)
µ2
3023 ft3
¶
= 1568 lbf
Pressure Force
H> = %>I
= (439!2 psfg)¡0 × 22 ft2
¢
= 5519 lbf
88
Substitute into Eq. (1).
HA = "H> +.liquid +.dome
= " (5519 lbf) + (1568 lbf) + (1000 lbf)= "2951 lbf
HA = 2950 lbf (metal is in tension)
89
PROBLEM 3.22
Situation: A piston system is described in the problem statement.
Find: Volume of oil to be added to raise piston by 1 in.
ANALYSIS
h
Volumeadded
Volume added is shown in the gure. First get pressure at bottom of piston
Hydrostatic force
%,I, = 10 lbf
%, = 10$I,
= 10$((0$4)× 42)= 0!796 psig = 114!6 psfg
Hydrostatic equation
(oilM = 114!6 psfg
M = 114!6$(62!4× 0!85) = 2!161 ft = 25.9 in
Finally
,"added = (0$4)(42 × 1 + 12 × 26!9)
,"added = 33!7 in.3
90
PROBLEM 3.23
Situation: An air bubble rises from the bottom of a lake.
Find: Ratio of the density of air within the bubble at 34 ft to the density at 8 ft.
Assumptions: a.) Air is ideal gas. b.) Temperature is constant. c.) Neglect surfacetension e!ects.
APPROACH
Apply the hydrostatic equation and the ideal gas law.
ANALYSIS
Ideal gas law
# =%
"&
#34 =%34"&
; #8 =%8"&
#34#8
=%34%8
where % is absolute pressure (required in ideal gas law).
Hydrostatic equation
%8 = %atm + ( (8 ft)
= 2120 lbf$ ft2 +¡62!4 lbf/ft3
¢(8 ft)
= 2619 lbf/ft2
%34 = %atm + ( (34 ft)
= 2120 lbf$ ft2 +¡62!4 lbf/ft3
¢(34 ft)
= 4241!6 lbf/ft2
Density ratio
#34#8
=4241!6 lbf/ft2
2619 lbf/ft2
= 1! 620
#34$#8 = 1!62
91
PROBLEM 3.24
Situation: A liquid’s mass density property is described in the problem statement.
Find: Gage pressure at 10 m depth.
ANALYSIS
# = #water(1 + 0!01A)
or ( = (water(1 + 0!01A)
A%$AR = "(A%$AA = (water(1 + 0!01A)
Integrating% = (water(A+ 0!01A
2$2) + -
For boundary condition %gage = 0 when A = 0 gives - = 0!
% (A = 10m) = (water(10 + 0!01× 102$2)% (A = 10m) = 103 kPa
92
PROBLEM 3.25
Situation: A liquid’s mass density property is described in the problem statement.
Find: Depth where pressure is 60 kPa.
ANALYSIS
# = #water(1 + 0!01A)
or ( = (water(1 + 0!01A)
A%$AR = "(A%$AA = (water(1 + 0!01A)
Integrating% = (water(A+ 0!01A
2$2) + -
For boundary condition %gage = 0 when A = 0 gives - = 0!
% = (water(A+ 0!01 A2$2)
60' 000 N/m2 = (9810 N/m3)(A+ !005 A2)
Solving the above equation for A yields
A = 5!94m
93
PROBLEM 3.26
Situation: A liquid’s mass density property is described in the problem statement.
Find: Pressure at depth of 20 ft.
ANALYSIS
A%$AR = "(= "(50" 0!1 R)
% = ""20Z
0
(50" 0!1 R) AR
= "50 R + 0!1 R2$2 |"200
= 1000 + 0!1× 400$2
% = 1020 psfg
94
PROBLEM 3.27
Situation: A pipe system is described in the problem statement.
Find: Gage pressure at pipe center.
APPROACH
Apply the manometer equation.
ANALYSIS
Manometer equation. (add up pressures from the pipe center to the open end of themanometer)
%pipe + (0!5 ft)(62!4 lbf/ft3) + (1 ft)(2× 62!4 lbf/ft3)
"(2!5 ft)(62!4 lbf/ft3) = 0
%pipe = (2!5" 2" 0!5) ft (62!4 lbf/ft3) = 0
% (center of pipe) = 0!0 lbf$ ft2
95
PROBLEM 3.28
Situation: A pipe system is described in the problem statement.
Find: Gage pressure at pipe center.
APPROACH
Apply the manometer equation.
ANALYSIS
Manometer equation (from A to the open end of the manometer)
%= + (2!0 ft)(62!3 lbf/ft3)" (2$12 ft)(847 lbf/ft3) = 0
%= = "124!6 lbf/ft2 + 141!2 lbf/ft2 = +16!6 lbf/ft2
%= = +0!12 psi
96
PROBLEM 3.29
Situation: A piezometer (A = 0!5mm) is connected to a pipe. The uid is waterSurface tension is relevant. Liquid level in the piezometer is 15 cm
Find: Estimate gage pressure in pipe A.
Properties: From Table A-5: (62B = 9790N$m3! From the footnote in Table A-5,
O62B = 0!073N$m!
Assumptions: For capillary rise, assume a small contact angle—cos K % 1!
APPROACH
Apply equilibrium to a free body comprised of a 15 cm column of water.
ANALYSIS
Equilibrium (vertical direction)
%=I". + HC = 0 (1)
Weight of the water column. = (
¡0A2$4
¢2 (2)
Force due to surface tensionHC = O0A (3)
Combine Eqs. (1) to (3):
%=¡0A2$4
¢" (
¡0A2$4
¢2+ O0A = 0
Thus%= = (2"
4O
A
Calculations:
%= =¡9790N$m3
¢(0!15m)"
4 (0!073N$m)
0!0005m= 884Pa-gage
%= = 884Pa-gage
97
PROBLEM 3.30
Situation: A pipe system is described in the problem statement.
Find: Pressure at the center of pipe B.
APPROACH
Apply the manometer equation.
ANALYSIS
Manometer equation (add up pressures from the open end of the manometer to thecenter of pipe B).
%> = 0
+¡0!30m× 20' 000N$m3
¢
"¡0!1m× 20' 000N$m3
¢
"¡0!5m× 10' 000N$m3
¢
= "1000Pa
%> = "1!00 kPa-gage
98
PROBLEM 3.31
Situation: A container is described in the problem statement.
Find: Pressure in the air within the container
APPROACH
Apply conservation of mass to nd the decrease in liquid level in the container. Then,apply the hydrostatic equation.
ANALYSIS
Conservation of mass (applied to liquid)
Gain in mass of liq. in tube = Loss of mass of liq. in container
(Volume change in tube) #liquid = (Volume change in container ) #liquid,"tube = ,"container
(0$4)12tube × L = (0$4)12
container × (!M)container
(!M)container =
µ1tube1container
¶2L
(!M)container = (1$8)2 × 40= 0!625 cm
Hydrostatic equation
%container = (L sin 10! +!M)#)
= (40 sin 10! + 0!625)× 10"2 × 800× 9!81
%container = 594 Pa
99
PROBLEM 3.32
Situation: A container is described in the problem statement.
Find: Pressure in the air within the container
APPROACH
Apply conservation of mass to nd the decrease in liquid level in the container. Then,apply the hydrostatic equation.
ANALYSIS
Conservation of mass (applied to liquid)
Gain in mass of liq. in tube = Loss of mass of liq. in container
(Volume change in tube) #liquid = (Volume change in container ) #liquid,"tube = ,"container
(0$4)12tube × L = (0$4)12
container × (!M)container
(!M)container =
µ1tube1container
¶2L
(!M)container = (1$10)2 × 3= 0!03 ft
Hydrostatic equation
%container = (L sin 10! +!M)(
= (3 sin 10! + !03)× 50= 27! 548 lbf$ ft2
%container = 27!5 psfg
100
PROBLEM 3.33
Situation: A piston scale is described in the problem statement.
Find: Select a piston size and standpipe diameter.
ANALYSIS
First of all neglect the weight of the piston and nd the piston area which will givereasonable manometer deections. Equating the force on the piston, the piston areaand the deection of the manometer gives
. = !M(I
where ( is the specic weight of the water. Thus, solving for the area one has
I =.
(!M
For a four foot person weighing 60 lbf, the area for a 4 foot deection (manometernear eye level of person) would be
I =60
62!4× 4= 0!24 ft2
while for a 250 lbf person 6 feet tall would be
I =250
62!4× 6= 0!66 ft2
It will not be possible to maintain the manometer at the eye level for each person sotake a piston area of 0.5 ft2! This would give a deection of 1.92 ft for the 4-foot, 60lbf person and 8 ft for the 6-foot, 250 lbf person. This is a good compromise.
The size of the standpipe does not a!ect the pressure. The pipe should be big enoughso the person can easily see the water level and be able to read the calibration onthe scale. A 1/2 inch diameter tube would probably su"ce. Thus the ratio of thestandpipe area to the piston area would be
IpipeIpiston
=0!785× 0!52
0!5× 144= 0!0027
This means that when the water level rises to 8 ft, the piston will only have movedby 0!0027× 8 = 0!0216 ft or 0.26 inches.The weight of the piston will cause an initial deection of the manometer. If thepiston weight is 5 lbf or less, the initial deection of the manometer would be
!M! =.piston
(Ipiston= 0!16 ft or 1.92 inches
This will not signicantly a!ect the range of the manometer (between 2 and 8 feet).The system would be calibrated by putting knows weights on the scale and markingthe position on the standpipe. The scale would be linear.
101
PROBLEM 3.34
Situation: A pipe system is described in the problem statement.
Find: Gage pressure at center of pipe A.(a) units of pounds per square inch(b) units of kilopascals.
APPROACH
Apply the manometer equation.
ANALYSIS
Manometer equation
%= = 1!31× 847" 4!59× 62!4= 823!2 psf
%= = 5!72 psig
%= = 0!4× 1!33× 105 " 1!4× 9810%= = 39!5 kPa gage
102
PROBLEM 3.35
Situation: A U-tube manometer is described in the problem statement.
Find: Specic weight of unknown uid.
ANALYSIS
Volume of unknown liquid is V–= (0$4)A2L = 2 cm3
," = (0$4)(0!5)2L = 2
L = 10!186 cm
Manometer equation (from water surface in left leg to liquid surface in right leg)
0 + (10!186 cm - 5 cm)(10"2 m/cm)(9,810 N/m3)"(10!186 cm)(10"2 m/cm)(liq. = 0
508!7 Pa " 0!10186(liq. = 0
(liq. = 4' 995 N/m3
103
PROBLEM 3.36
Situation: A U-tube is described in the problem statement.
Find: (a) Locate the water surface.(b) Locate the mercury surfaces.(c) Find the maximum pressure in tube.
Properties: (a) Mercury from Table A.4: (6D = 847 lbf$ ft3! (b) Water from Table
A.4: (620 = 62!4 lbf$ ft3
APPROACH
Since the mercury column has a length of 1.0 ft, write an equation that involves?E and ?F! Apply the manometer equation to develop a second equation, and thensolve the two equations simultaneously. Apply the hydrostatic equation to nd themaximum pressure.
ANALYSIS
Water
1.5 ft
Hg
y L
yR
Since the column of mercury is 1.0 ft long:
?E + ?F = 1 ft"8 in
12 in$ ft(1)
= 0!333 ft
Manometer equation
0 + (1!0× 62!4) + (?E × 847)" (?F × 847) = 0 (2)
?E " ?F = "0!0737 ft
Combine eqns. (1) and (2):
2?E = 0!333" 0!0737?E = 0!130 ft
104
The water/mercury interface is 0.13 ft above the horizontal leg.
The air/water interface is 1.13 ft above the horizontal leg.
?F = 0!333" ?E= 0!203 ft
The air/mercury interface is 0.203 ft above the horizontal leg.
Hydrostatic Equation.
%max = 0!203× 847%max = 172 psfg
105
PROBLEM 3.37
Situation: A U-tube is described in the problem statement.
Find: (a) Design the manometer.(b) Predict probable degree of accuracy.
ANALYSIS
Consider the manometer shown in the gure.
! h
• Use a manometer uid that is heavier than water. The specic weight of themanometer uid is identied as ("!
• Then !Mmax = !%max$((" " (H2O)!
• If the manometer uid is carbon-tetrachloride ((" = 15' 600)'!Mmax = 60 ×103$(15' 600" 9' 180) = 13!36 m –(too large).
• If the manometer uid is mercury ((" = 133' 000)'!Mmax = 60×103$(1333' 000"9' 810) = 0!487 m–(O.K.). Assume the manometer can be read to ±2 mm.Then % error = ±2$487 = ±0!004 = ±0!4%. The probable accuracy for fulldeection (0.5m) is about 99.6%. For smaller pressure di!erences the possibledegree of error would vary inversely with the manometer deection. For ex-ample, if the deection were 10 cm = 0.1 m, then the possible degree of errorwould be ±2% and the expected degree of accuracy would be about 98%.
COMMENTS
Error analysis is much more sophisticated than presented above; however, this simpletreatment should be enough to let the student have an appreciation for the subject.
106
PROBLEM 3.38
Situation: A manometer is described in the problem statement.
Find: Design a apparatus to measure specic weights from 50 lbf$ ft3 to 100 lbf$ ft3
ANALYSIS
One possible apparatus might be a simple glass U-tube. Have each leg of the U-tubeequipped with a scale so that liquid levels in the tube could be read. The proceduremight be as described in steps below:
1. Pour water into the tube so that each leg is lled up to a given level (for exampleto 15 in. level).
2. Pour liquid with unknown specic weight into the right leg until the water inthe left leg rises to a given level (for example to 27 in. level).
3. Measure the elevation of the liquid surface and interface between the two liquidsin the right tube. Let the distance between the surface and interface be L ft.
4. The hydrostatic relationship will be (H2O(20) = (<L or (< = 2SH2O$L.
5. To accommodate the range of ( specied the tube would have to be about 3 or4 ft. high.
The errors that might result could be due to:
1. error in reading liquid level
2. error due to di!erent surface tension
(a) di!erent surface tension because of di!erent liquids in each leg
(b) one leg may have slightly di!erent diameter than the other one; therefore,creating di!erent surface tension e!ect.
Sophisticated error analysis is not expected from the student. However, thestudent should sense that an error in reading a surface level in the manometerwill produce an error in calculation of specic weight. For example, assumethat in one test the true value of L were 0.28 ft. but it was actually read as 0.29ft. Then just by plugging in the formula one would nd the true value of (would be 7.14 (H2O but the value obtained by using the erroneous reading wouldbe found to be 6.90 (H2O. Thus the manometer reading produced a -3.4% errorin calculated value of (. In this particular example the focus of attention wason the measurement of L. However, the setting of the water surface in the leftleg of the manometer would also involve a possible reading error, etc.
107
COMMENTS
Other things that could be considered in the design are:
1. Diameter of tubing
2. Means of support
3. Cost
4. How to empty and clean tube after test is made.
108
PROBLEM 3.39
Situation: A pipe system is described in the problem statement.
Find: Pressure at center of pipe A.
ANALYSIS
Manometer equation
%= = (0!9 + 0!6× 13!6" 1!8× 0!8 + 1!5)9' 810 = 89' 467 Pa%= = 89!47 kPa
109
PROBLEM 3.40
Situation: A pipe system is described in the problem statement.
Find: (a) Di!erence in pressure between points A and B.(b) Di!erence in piezometric head between points A and B.
APPROACH
Apply the manometer equation.
ANALYSIS
Manometer equation
%= " (1m)¡0!85× 9810N$m3
¢+ (0!5m)
¡0!85× 9810N$m3
¢= %>
%= " %> = 4169Pa
%= " %> = 4!169 kPa
Piezometric head
M= " M> = (%=(+ R=)" (
%>(+ R>)
=%= " %>(
+ (R= " R>)
=4169N$m2
0!85× 9810N$m3" 1m
= "0!5 m
M= " M> = "0!50 m
110
PROBLEM 3.41
Situation: A manometer is described in the problem statement.
Find: Manometer deection when pressure in tank is doubled.
ANALYSIS
%" %'5" = (M
For 150 kPa absolute pressure and an atmospheric pressure of 100 kPa,
(M = 150" 100 = 50 kPa
For an absolute pressure of 300 kPa
(M:G% = 300" 100 = 200 kPa
Divide equations to eliminate the specic weight
M:G%M
=200
50= 4!0
soM:G% = 4!0M
111
PROBLEM 3.42
Situation: A manometer tapped into a vertical conduit is described in the problemstatement.
Find: (a) Di!erence in pressure between points A and B(b) Piezometric pressure between points A and B .
Properties: From Table A.4, (HD = 847 lbf/ft3!
(oil = (0!95)(62!4 lbf/ft3)
= 59!28 lbf/ft3
ANALYSIS
Manometer equation
%= + (18$12) ft ((oil) + (2$12) ft. (oil + (3$12) ft (oil"(3$12) ft (Hg " (2$12) ft (oil = %>
thus
%= " %> = ("1!75 ft.)(59.28 lbf/ft3) + (0!25 ft.)(847 lbf/ft3)
%= " %> = 108!01 lbf/ft2
Piezometric head
M= " M> = (%= " %>)$(oil + R= " R>M= " M> = (108!01 lbf/ft)/(59.28 lbf/ft3) + (1!5" 0)
M= " M> = 3!32 ft.
112
PROBLEM 3.43
Situation: Two manometers attached to an air tank are described in the problemstatement.
Find: Di!erence in deection between manometers.
ANALYSIS
The pressure in the tank using manometer > is
%5 = %'5" " (%!M0
and using manometer C is%5 = 0!9%'5" " (%!M'
Combine equations%'5" " (%!M0 = 0!9%'5" " (%!M'
or0!1%'5" = (%(!M0 "!M')
Solve for the di!erence in deection
!M0 "!M' =0!1%'5"(%
=0!1× 105
9!81× 103
!M0 "!M' = 1!02 m
113
PROBLEM 3.44
Situation: A manometer measuring pressure di!erence is described in the problemstatement.
Find: (a) Pressure di!erence.(b) Piezometric pressure di!erence between points A and B.
APPROACH
Apply the manometer equation and the hydrostatic equation.
ANALYSIS
Manometer equation
%> = %= + 0!03(( " 0!03(" " 0!1((
or%> " %= = 0!03((( " (")" 0!1((
Substitute in values
%> " %= = 0!03(9810" 3× 9810)" 0!1× 9810
%> " %= = "1!57 kPa
Change in piezometric pressure
%;> " %;= = %> + ((R> " (%= + ((R=)= %> " %= + (((R> " R=)
But R> " R= is equal to 0.1 m so from equation above
%;> " %;= = %> " %= + 0!1((= 0!03(9810" 3× 9810)= "588!6 Pa
%;> " %;= = "0!589 kPa
114
PROBLEM 3.45
Situation: A tank has a small air tube in it to measure the surface level of theliquid—additional details are provided in the problem statement.
Find: Depth of liquid in tank.
Assumptions: Neglect the change of pressure due to the column of air in the tube.
ANALYSIS
%gage " (A" 1)(liquid = 0
20' 000" ((A" 1)× 0!85× 9' 810) = 0
A = (20' 000$(0!85× 9' 810)) + 1
A = 3!40 m
115
PROBLEM 3.46
Situation: The atmosphere is described in the problem statement.
Find: The correct statement.
ANALYSIS
A%$AR = (
Because ( becomes smaller with an increase in elevation the ratio of (A%$AR)’s willhave a value greater than 1.
116
PROBLEM 3.47
Situation: The boiling point of water is described in the problem statement.&sea level = 296 K= 23!C
Find: Boiling point of water at 1500 and 3000 m for standard atmospheric conditions.
APPROACH
Apply the atmosphere pressure variation equation that applies to the troposphere.
ANALYSIS
For standard atmosphereAtmosphere pressure variation (troposphere)
% = %0[(&0 " T(R " R0))$&0]D*HF
= 101!3[296" 5!87(R " R0))$296]D*HF
where)$T" = 9!81$(5!87× 10"3 × 287) = 5!823
So%1I500 = 101!3[(296" 5!87(1!5))$296]54823 = 84!9 kPa%3I000 = 101!3[(296" 5!87(3!0))$296]54823 = 70!9 kPa
From table A-5,
&boiling, 1,500 m ! 95 !C (interpolated)
&boiling, 3,000 m ! 90 !C (interpolated)
117
PROBLEM 3.48
Situation: This problem involves pressure variation from a depth of 10m in a lake to4000m in the atmosphere.
Find: Plot pressure variation.
Assumptions: Atmospheric pressure is 101 kPa. The lake surface is at sea level.
ANALYSIS
Atmosphere pressure variation (troposphere)
%= = 101!3
µ1"
5!87× 10"3 × R296
¶54823
Pressure in water%% = 101!3 + 9!810× R
P re s s u re (k P a )
4 0 6 0 8 0 1 0 0 1 2 0 1 4 0 1 6 0 1 8 0 2 0 0 2 2 0
0
1 0 0 0
2 0 0 0
3 0 0 0
4 0 0 0
118
PROBLEM 3.49
Situation: A woman breathing is described in the problem statement.
Find: Breathing rate at 18,000 ft.
Assumptions: Volume drawn in per breath is the same.Air is an ideal gas.
ANALYSIS
Let bV–# = constant where > = breathing rate = number of breaths for each unit oftime, V–= volume per breath, and # = mass density of air. Assume 1 is sea level andpoint 2 is 18,000 ft. elevation. Then
>1,"1 #1 = >2,"2 #2>2 = >1(,"1 $,"2)(#1$#2)
then >2 = >1(#1$#2) but # = (%$"& )
Thus, >2 = >1(%1$%2)(&2$&1)
%2 = %1(&2$&1)D*HF
%1$%2 = (&2$&1)"D*HF
Then >2 = >1(&2$&1)1"D*HF
Since the volume drawn in per breath is the same
>2 = >1(#1$#2)
Ideal gas law>2 = >1(%1$%2)(&2$&1)%1$%2 = (&2$&1)
"D*HF
>2 = >1(&2$&1)1"D*HF
where >1 = 16 breaths per minute and &1 = 59!H = 519!"
&2 = &1 " T(R2 " R1) = 519" 3!221× 10"3(18' 000" 0) = 461!0 oR>2 = 16(461!0$519)1"3242*(34221×10
"3×1I715)
>2 = 28!4 breaths per minute
119
PROBLEM 3.50
Situation: A pressure gage in an airplane is described in the problem statement.
Find: Elevation and temperature when pressure is 75 kPa.
ANALYSIS
Atmosphere pressure variation (troposphere)
% = %0[(&0 " T(R " R0))$&0]D*HF
75 = 95[(283" 5!87(R " 1))$283]9481*(5487×10"3×287)
R = 2!91 km
& = &0 " T(R " R0)= 10" 5!87(2!91" 1)
& = "1!21oC
120
PROBLEM 3.51
Situation: A pressure gage in an airplane is described in the problem statement.
Find: Elevation when pressure is 10 psia.
ANALYSIS
Atmosphere pressure variation (troposphere)
% = %0[(&0 " T(R " R0))$&0]D*HF
10 = 13!6[((70 + 460)" 3!221× 10"3(R " 2' 000))$(70 + 460)]3242*(34221×10"3×1I715)
R = 10' 452 ft
121
PROBLEM 3.52
Situation: Denver, CO (the mile-high city) is described in the problem statement.
Find: (a) Pressure in both SI and traditional units.(b) Temperature in both SI and traditional units.(c) Density in both SI and traditional units.
ANALYSIS
Atmosphere pressure variation (troposphere)
& = &0 " T(R " R0)= 533" 3!221× 10"3(5' 280" 0) = 516!R= 296" 5!87× 10"3(1' 609" 0)
& = 287 K = 516 !R
% = %0(&$&0)D*HF
= 14!7(516$533)54823
% = 12!2 psia
%' = 101!3(287$296)9481*(5487×10"3×287)
%' = 86!0 kPa = 12!2 psia
Ideal gas law
# = %$"&
= (12!2× 144)$1' 715× 516)= 0.00199 slugs/ft3
# = 86' 000$(287× 287)
# = 1!04 kg/m3 = 0.00199 slugs/ft3
122
PROBLEM 3.53
This problem involves the Martian atmosphere. Some relevant data.
• Temperature at the Martian surface is & = "63 !C = 210K The pressure atthe Martian surface is % = 7 mbar.
• The atmosphere consists primarily of CO2 (95.3%) with small amounts of ni-trogen and argon.
• Acceleration due to gravity on the surface is 3.72 m/s2.
• Temperature distribution. Approximately constant from surface to 14 km.Temperature decreases linearly at a lapse rate of 1.5oC/km from 14 to 34 km.
Find: Pressure at an elevation of 8 km.Pressure at an elevation of 30 km.
Assumptions: Assume the atmosphere is totally carbon dioxide.
Properties: CO2 (from Table A.2): the gas constant is " =189 J/kg·K.
APPROACH
Derive equations for atmospheric pressure variation from rst principles.
ANALYSIS
A.) Elevation of 8 km.
Di!erential equation describing pressure variation in a hydrostatic uid
A%
AR= "#) (1)
Ideal gas law# =
%
"&(2)
Combine Eqs. (1) and (2)A%
AR= "
%
"&) (3)
Integrate Eq. (3) for constant temperature
ln%
%!= "
(R " R!))"&
(4)
Substitute in values
ln%
%!= "
(8000m) (3!72m$ s2)
(189 J$ kg · K) (210K)= "0!7498
123
Thus
%
%!= exp("0!7498)
= 0!4725
and
% = (7mbar)× 0!4725= 3!308 mbar
%(R = 8km) = 3!31mbar
B.) Elevation of 30 km.
Apply Eq. (4) to nd the pressure at R = 14 km
%14 km%!
= exp
·"(14000m) (3!72m$ s2)
(189 J$ kg · K) (210K)
¸
= exp("1!3122)= 0!2692
%14 km = (7mbar) (0!2692)
= 1! 884 mbar
In the region of varying temperature Eq. (3) becomes
A%
AR=
%)
"[&! + T(R " R!)]
where the subscript U refers to the conditions at 14 km and T is the lapse rate above14 km. Integrating gives
%
%!=
·&! " T(R " R!)
&!
¸D*HF
Calculations for R = 30km!
%
(1! 884 mbar)=
·210" 0!0015(30000" 14000)
210
¸3472*(040015×189)
= 0!2034
% = (1! 884 mbar) 0!2034
= 0!3832mbar
%(R = 30 km) = 0!383mbar
124
PROBLEM 3.54
Situation: Standard atmospheric conditions are described in the problem statement.
Find: (a) Pressure at 30 km altitude.(b) Density at 30 km altitude.
ANALYSIS
The equation for pressure variation where the temperature increases with altitude is
A%
AR= "( =
%)
"[&! + T(R " R!)]
where the subscript U refers to the conditions at 16.8 km and T is the lapse rate above16.8 km. Integrating this equation gives
%
%!=
·&! + T(R " R!)
&!
¸"D*HF
Substituting in the values gives
%
%!=
·215!5 + 1!38× (30" 16!8)
215!5
¸"9481*(1438×04287)
= 1!084"2448
= 0!134
Thus the pressure is
% = 0!134× 9!85= 1!32 kPa.
Ideal gas law
# =%
"&
=1!32
0!287× 234# = 0!0197 kg/m3
125
PROBLEM 3.55
Situation: The US standard atmosphere from 0 to 30 km is described in the problemstatement.
Find: Design a computer program that calculates the pressure and density.
ANALYSIS
The following are sample values obtained using computer calculations.
altitude (km) temperature (!C) pressure (kPa) density (kg/m3)10 -35.7 27.9 0.40915 -57.5 12.8 0.20825 -46.1 2.75 0.042
126
PROBLEM 3.56
Situation: A submerged gate is described in the problem statement.
Find: (a) Net force on gate.(b) Moment required to keep gate closed.
ANALYSIS
Hydrostatic forceForce of slurry on gate = %&I and it acts to the right. Force of water on gate = %%Iand it acts to the left
Hnet = (%& " %%)I= (8(& " 8(%)I= (8 ft)(16 ft2)(150 lbf/ft3 " 60 lbf/ft3)
Hnet = 11' 520 lbf
Because the pressure is uniform along any horizontal line the moment on the gate iszero; therefore, the moment required to keep the gate closed is zero.
127
PROBLEM 3.57
Situation: Two submerged gates are described in the problem statement.
Find: How the torque changes with increasing water depth 4!
APPROACH
Apply hydrostatic force equation.
ANALYSIS
Let the horizontal gate dimension be given as > and the vertical dimension, M!
Torque (gate A)&= = H (?1, " ?)
where H = the hydrostatic force acting on the gate and (?1, " ?) is the distancebetween the center of pressure and the centroid of the gate. Thus
&= = ((4 " (M$2))(>M)(V$?I)= ((4 " (M$2))(>M)(>M3$12)$(4 " (M$2))(>M))
&= = (>M3$12
Therefore, &= does not change with 4.
Torque (gate B)
&> = H ((M$2) + ?1, " ?)= ((4 " (M$2))(>M)((M$2) + ?1, " ?)= ((4 " (M$2))(>M)((M$2) + V(?I))= ((4 " (M$2))(>M)[(M$2) + (>M3$12)$((4 " (M$2))>M)]= ((4 " (M$2))>M2$2 + (>M3$12
Thus, &= is constant but &> increases with 4.
Case (b) is a correct choice.
Case (c) is a correct choice.
128
PROBLEM 3.58
Situation: Two submerged gates are described in the problem statement.
Find: Choose the statements that are valid.
ANALYSIS
The correct answers obtained by looking at the solution to problem 3.57 are thata, b, and e are valid statements.
129
PROBLEM 3.59
Situation: A submerged gate is described in the problem statement.
Find: Force of gate on block.
ANALYSIS
Hydrostatic force
Hhs = %I
= ?(I
= (10m)ס9810N$m3
¢× (4× 4) m2
= 1! 569 6× 106N
Center of pressure
?1, " ? =V
?I
=>M3$12
?I
=(4× 43$12) m4
(10m) (4× 4) m2= 0!133 33m
Equilibrium (sum moments about the pivot)
Hhs (?1, " ?)" Hblock (2m) = 0¡1! 569 6× 106N
¢(0!133 33m)" Hblock (2m) = 0
Hblock = 1!046× 105N (acts to the left)
Hgate = 105 kN (acts to the right)
130
PROBLEM 3.60
Situation: Concrete forms are described in the problem statement.
Find:a.) Hydrostatic force per foot on formb.) Force exerted on bottom tie.
ANALYSIS
Hydrostatic force
Hhs = %I = ?(I
= 4!5 ft× 150 lbf$ ft3 × (9 ft)
Hhs = 6075lbfft
Center of pressure
?1, = ? +V
?I
= 4!5 +(1× 93)$124!5× 9
= 6!00 ft
Equilibrium (sum moments about the top tie)
Hbottom tie =Hhs × ?1,
M
=2 ft× 6075 lbf$ ft× 6!00 ft
9 ft8100 lbf
Hbottom tie = 8100 lbf (tension)
131
PROBLEM 3.61
Situation: A rectangular gate is hinged at the water line. The gate is 4 ft high by12 ft wide.
Find: Force to keep gate closed.
Properties: From Table A.4, (Water = 62!4 lbf/ft3
ANALYSIS
Hydrostatic Force (magnitude):
HJ = %I
=¡(H2O × ?
¢ ¡48 ft2
¢
=¡62!4 lbf$ ft3 × 2 ft
¢ ¡48 ft2
¢
= 5950 lbf
Center of pressure. Since the gate extends from the free surface of the water, HJacts at 2/3 depth or 8/3 ft. below the water surface.
Equilibrium. ( moment center is the hinge)
X+ = 0
(HJ × 8$3 ft)" (4 ft)H = 0
H =5950 lbf × 8$3 ft
4 ft
H = 3970 lbf to the left
132
PROBLEM 3.62
Situation: A submerged gate is described in the problem statement. The gate is 6 ftby 6 ft.
Find: Reaction at point A.
APPROACH
Find the hydrostatic force and the center of pressure. Since the gate is in equilibrium,sum moments about the stop.
ANALYSIS
Hydrostatic force (magnitude)
H = %I
= (3 m + 3 m× cos 30!)(9810 N/m3)× 36 m2
H = 1' 977' 000 N
Center of pressure
? = 3 + 3$ cos 30o
= 6!464 m
?1, " ? =V
?I
=(64$12)m4
6!464 m× 24 m2= 0!696 m
Equilibrium.Take moments about the stop
X+stop = 0
6"= " (3" 0!696)× 1' 977' 000 = 0
"= = 759' 000N
Reaction at point A = 759 kN . This force is normal to gate and acting at an angleof 30! below the horizontal.
133
PROBLEM 3.63
Situation: A submerged gate is described in the problem statement.
Find: Force * required to begin to open gate.
ANALYSIS
The length of gate is&42 + 32 = 5 m
Hydrostatic force
H = %I = ?(I
= (3)(9810)(2× 5)= 294!3 kN
Center of pressure
?1, " ? =V
?I
=(2× 53) $12(3) (2× 5)
= 0!694 4 m
Equilibrium.
X+hinge = 0
294!3× (2!5 + 0!694 4)" 3* = 0
* = 313 kN
134
PROBLEM 3.64
Situation: A submerged gate opens when the water level reaches a certain value.Other details are given in the problem statement.
Find: M in terms of L to open gate.
APPROACH
As depth of water increase, the center of pressure will move upward. The gate willopen when the center of pressure reaches the pivot..
ANALYSIS
Center of pressure (when the gate opens)
?1, " ? = 0!60L" 0!5L= 0!10L (1)
Center of pressure (formula)
?1, " ? =V
?I
=(L× L3) $12(M+ L$2)L2
(2)
Combine Eqs. (1) and (2)
0!10L =(L× L3) $12(M+ L$2)L2
0!10 =L
12(M+ L$2)
M =5
6L"
1
2L
=1
3L
M = L$3
135
PROBLEM 3.65
Situation: A buttery valve is described in the problem statement.
Find: Torque required to hold valve in position.
ANALYSIS
Hydrostatic force
H = %I = ?(I
= (30 ft× 62!4 lb/ft3)(0 ×12$4) ft2)
= (30× 62!4× 0 × 102$4) lb= 147' 027 lb
Center of pressure
?1, " ? = V$?I
= (034$4)$(?032)
= (52$4)$(30$!866)
= 0!1804 ft
Torque
Torque = 0!1804× 147' 027& = 26' 520 ft-lbf
136
PROBLEM 3.66
Situation: A submerged gate is described in the problem statement.
Find: Will gate fall or stay in position.
ANALYSIS
Hydrostatic force
H = %I
= (1 + 1!5)9' 810× 1× 3×&2
= 104' 050
Center of pressure
?1, " ? =V
?I
=
¡1× (3
&2)3¢$12
(2!5×&2)(1× 3
&2)
= 0!4243 m
Overturning moment
+1 = 90' 000× 1!5= 135' 000 N ·m
Restoring moment
+2 = 104' 050× (3&2$2" 0!424)
= 176' 606N · mF +1
So the gate will stay in position.
137
PROBLEM 3.67
Situation: A submerged gate is described in the problem statement.
Find: Will gate fall or stay in position.
ANALYSIS
H = (4 + 3!535)62!4× (3× 7!07&2) = 14' 103 lbf
?1, " ? = 3× (7!07&2)3$(12× 7!535
&2× 3× 7!07
&2)
= 0!782 ft
Overturning moment +1 = 18' 000× 7!07$2 = 63' 630 N ·mRestoring moment +2 = 14' 103(7!07
&2$2" 0!782)
= 59' 476 N ·mG+1
So the gate will fall.
138
PROBLEM 3.68
Situation: A submerged gate is described in the problem statement.
Find: (a) Hydrostatic force (H ) on gate, (b) Ratio ("-$H ) of the reaction force tothe hydrostatic force.
ANALYSIS
H = %I
= (M+ 2M$3)((.M$ sin 60!)$2
H = 5(.M2$3&3
?1, " ? = V$?I =. (M$ sin 60!)3$(36× (5M$(3 sin 60!))× (.M$2 sin 60!))= M$(15
&3)
"+ = 0
"-M$ sin 60! = H [(M$(3 sin 60!))" (M$15
&3)]
"-$H = 3$10
139
PROBLEM 3.69
Situation: A submerged gate is described in the problem statement.
Find: (a) Magnitude of reaction at A.(b) Comparison to that for a plane gate.
ANALYSIS
a)
H63AK = %I = (0!25L+ 0!5L× 0!707)× W.L = 0!6036(.L2
?1, " ? = V$?I = (.L3$12)$(((0!25L$0!707) + 0!5L)×.L)?1, " ? = 0!0976LX
+hinge = 0
Then " 0!70"=L+ (0!5L+ 0!0976L)× 0!6036(.L2 = 0
"= = 0!510(.L2
b) The reaction here will be less because if one thinks of the applied hydrostaticforce in terms of vertical and horizontal components, the horizontal component willbe the same in both cases, but the vertical component will be less because there isless volume of liquid above the curved gate.
140
PROBLEM 3.70
Situation: A submerged gate is described in the problem statement.
Find: Force required to hold gate in place.
APPROACH
To develop an equation for the force * , apply equilibrium by summing moments aboutthe hinge. Solving this equation requires the hydrostatic force. The hydrostatic forcecan be found by calculating the pressure at the depth of the centroid and by ndingthe line of action. To nd the line of action, calculate the equivalent depth of liquidthat account for the pressure acting the free surface.
ANALYSIS
Hydrostatic equation (from free surface of the liquid to centroid of the gate)
%1(liquid
+ R1 =%2(liquid
+ R2
%16(water
+³?1 +
?22
´=
%26(water
+ 0
(5× 144) lbf$ ft2
0!8ס62!4 lbf$ ft3
¢ +µ1 ft +
10 ft
2
¶=
%2
0!8ס62!4 lbf$ ft3
¢
%2 = 1019!5 lbf$ ft2
Hydrostatic force
H = %I = %2I
=¡1019!5 lbf$ ft2
¢(10 ft× 6 ft)
= 61170 lbf
Line of action of hydrostatic force
?1, " ? =V
?I(1)
V =>M3
12=6 ft (10 ft)3
12= 500 ft4
I = (10 ft× 6 ft) = 60 ft2
To nd ? in Eq. (1), apply the hydrostatic equation to locate an equivalent freesurface where pressure is zero.
0
(liquid+ Mequivalent =
%1(liquid
+ 0
Mequivalent =(5× 144) lbf$ ft2
0!8ס62!4 lbf$ ft3
¢
= 14! 423 ft
141
? = Mequivalent +10 ft
2= 14! 423 ft +
10 ft
2= 19! 423 ft
Back to Eq. (1)
?1, " ? =V
?I
=500 ft4
(19! 423 ft) 60 ft2
= 0!429 ft
Equilibrium. (sum moments about the hinge)
"*?2 + H³?22+ 0!429 ft
´= 0
* = H
µ1
2+0!429 ft
?2
¶
= 61170 lbf
µ1
2+0!429 ft
10 ft
¶
= 33209 lbf
* = 33' 200 lbf
142
PROBLEM 3.71
Situation: A concrete form is described in the problem statement.
Find: Moment at base of form per meter of length.
ANALYSIS
H = %I = (1!5$2)24' 000× (1!5$ sin 60!) = 31' 177 N?1, " ? = V$?I
= 1× (1!5$ sin 60!)3$(12× (1!5$2 sin 60!))× (1!5$ sin 60!))= 0!2887 m
Sum moment at base
+ = 31' 177× (1!5$2 sin 60! " 0!2887)= 18' 000 N ·m/m
+ = 18 kN·m/m
143
PROBLEM 3.72
Situation: A submerged gate is described in the problem statement.
Find: Gate is stable or unstable.
ANALYSIS
?1, = (2$3)× (8$ cos 45!) = 7!54 m
Point D is (8/cos 45!) m-3.5 m=7.81 m along the gate from the water surface; there-fore, the gate is unstable.
144
PROBLEM 3.73
Situation: A submerged gate is described in the problem statement.
Find: Minimum volume of concrete to keep gate in closed position.
ANALYSIS
H = %I = 1× 9' 810× 2× 1 = 19' 620 N?1, " ? = V$?I = (1× 23)$(12× 1× 2× 1) = 0!33 m
. = 19' 620× (1" 0!33)$2!5 = 5' 258 N," = 5' 258$(23' 600" 9' 810)
," = 0!381 m3
145
PROBLEM 3.74
Situation: A submerged gate is described in the problem statement.
Find: Minimum volume of concrete to keep gate in closed position..
ANALYSIS
H = 2!0× 62!4× 2× 4 = 998!4 lbf?1, " ? = (2× 43)$(12× 2!0× 2× 4) = 0!667 ft
. = 998!4(2!0" 0!667)$5 = 266 lbf," = 266$(150" 62!4)
," = 3!04 ft3
146
PROBLEM 3.75
Situation: A submerged gate is described in the problem statement.
Find: Length of chain so that gate just on verge of opening.
APPROACH
Apply hydrostatic force equations and then sum moments about the hinge.
ANALYSIS
Hydrostatic force
H6 = %I = 10× 9' 810× 012$4
= 98' 100× 0(12$4)= 77' 048 N
?1, " ? = V$(?I)
= (034$4)$(10× 012$4)
?1, " ? = 32$40 = 0!00625 m
EquilibriumX
+Hinge = 0
H6 × (0!00625 m)" 1× H = 0
But H = Hbuoy ".= I(10 m" L)(H2O " 200= (0$4)(!252)(10" L)(9' 810)" 200= 4815!5 N" 481!5L N" 200 N= (4615!5" 481!5L) N
where L = length of chain
77' 048× 0!00625" 1× (4615!5" 481!5L) = 0
481!55" 4615!5 + 481!5L = 0
L = 8!59 m
cpy -y
F
FH
147
PROBLEM 3.76
Situation: Three submerged gates are described in the problem statement.
Find: Which wall requires the greatest resisting moment.
ANALYSIS
The horizontal component of force acting on the walls is the same for each wall.However, walls I"I0 and - "- 0 have vertical components that will require greaterresisting moments than the wall D"D0. If one thinks of the vertical component as aforce resulting from buoyancy, it can be easily shown that there is a greater ”buoyant”force acting on wall I"I0 than on - 0- 0. Thus,
wall I"I0 will require the greatest resisting moment.
148
PROBLEM 3.77
Situation: A radial gate is described in the problem statement.
Find: Where the resultant of the pressure force acts.
ANALYSIS
dF=pdA
Consider all the di!erential pressure forces acting on the radial gate as shown. Be-cause each di!erential pressure force acts normal to the di!erential area, then eachdi!erential pressure force must act through the center of curvature of the gate. Be-cause all the di!erential pressure forces will be acting through the center of curvature(the pin), the resultant must also pass through this same point (the pin).
149
PROBLEM 3.78
Situation: A curved surface is described in the problem statement.
Find: (a) Vertical hydrostatic force.(b) Horizontal hydrostatic force.(c) Resultant force.
ANALYSIS
H? = 1× 9' 810× 1×+(1$4)0 × (1)2 × 1× 9' 810
H? = 17' 515 N
E = +0$H?
= 1× 1× 1× 9' 810× 0!5 + 1× 9' 810×1Z
0
&1" E2EAE$17' 515
= 0.467 m
H6 = %I
= (1 + 0!5)9' 810× 1× 1
H6 = 14' 715 N
?1, = ? + V$?I
= 1!5 + (1× 13)$(12× 1!5× 1× 1)?1, = 1!555 m
HF =p(14' 715)2 + (17' 515)2
HF = 22' 876 N
tan K = 14' 715$17' 515
K = 40!20
150
PROBLEM 3.79
Situation: A radial gate is described in the problem statement.
Find: Hydrostatic force acting on gate.
ANALYSIS
x
y
60o
From the reasoning given in the solution to problem 3.94, we know the resultantmust pass through the center of curvature of the gate. The horizontal component ofhydrostatic force acting on the gate will be the hydrostatic force acting on the verticalprojection of the gate or:Hydrostatic force
H6 = %I
= 25 ft× 62!4 lb/ft3 × 40 ft× 50 ftH6 = 3' 120' 000 lb
The vertical component of hydrostatic force will be the buoyant force acting on theradial gate. It will be equal in magnitude to the weight of the displaced liquid (theweight of water shown by the cross-hatched volume in the above Fig.).Thus,
H? = (,"where ," = [(60$360)0 × 502 ft2 " (1$2)50× 50 cos 30! ft2]× 40 ft
= 226!5 ft2 × 40 ft= 9600 ft3
Then H? = (62!4 lbf/ft3)(9060 ft3) = 565' 344 lbs
Hresult = 3' 120' 000 i + 565' 344 j lbf
acting through the center of curvature of the gate.
151
PROBLEM 3.80
Situation: A metal surface with liquid inside is described in the problem statement.
Find: Magnitude, direction, and location of horizontal and vertical components.
ANALYSIS
H6 = %I
= "2!5× 50× (3× 1)
H6 = "375 lbf/ft
(force acts to the right)
H? = ," ( = (1× 3 + 0 × 32 ×1
4)50
H? = 503!4 lbf/ft (downward)
?1, = 2!5 + 1× 33$(12× 2!5× 1× 3)?1, = 2!8 ft above the water surface
152
PROBLEM 3.81
Situation: A plug is described in the problem statement.
Find: Horizontal and vertical forces on plug.
ANALYSIS
Hydrostatic force
H7 = %I
= (RI
= 9810× 2× 0 × 0!22
H7 = 2465 N
The vertical force is simply the buoyant force.
H@ = (,"
= 9810×4
6× 0 × 0!253
H@ = 321 N
153
PROBLEM 3.82
Situation: A dome below the water surface is described in the problem statement.
Find: Magnitude and direction of force to hold dome in place.
ANALYSIS
H6 = (1 + 1)9810× 0 × (1)2
= 61' 640 N = 61!64 kN
This 61.64 kN force will act horizontally to the left to hold the dome in place.
(?1, " ?) = V$?I
= (0 × 14$4)$(2× 0 × 12)= 0!125 m
The line of action lies 0.125 m below the center of curvature of the dome.
H? = (1$2)(40 × 13$3)9' 810= 20' 550 N
H? = 20!55 kN
To be applied downward to hold the dome in place.
154
PROBLEM 3.83
Situation: A dome below the water surface is described in the problem statement.
Find: Force on the dome.
ANALYSIS
(4/3)(r/"#
Vertical projection
The horizontal component of the hydrostatic force acting on the dome will be thehydrostatic force acting on the vertical projection of the bottom half of the dome.
Hydrostatic force
H6 = %I
% = (4$3)(5$0) ft (62.4 lbf/ft3)
= 132!4 lbf/ft2
H6 = (132!4 lbf/ft2)(0$8)(102) ft2 = 5' 199 lbf
The vertical component of force will be the buoyant force acting on the dome. Itwill be the weight of water represented by the cross-hatched region shown in the Fig.(below).
Dome
Thus,
H? = (,"= (62!4 lbf/ft3)((1$6)013$4) ft3
H? = 8' 168 lbf
The resultant force is then given below. This force acts through the center of curva-ture of the dome.
Fresult = 5' 199i+ 8' 168j lbf
155
PROBLEM 3.84
Situation: A block of material is described in the problem statement.
Find: Specic weight and volume of material.
ANALYSIS
.in air = 700 N = ," (block (1)
.in water = 400 N = (," (block " ," (water) (2)
(water = 9810 N/m3 (3)
SolveEqs. (1), (2), and (3)
," = 0!0306 m3
(block = 22' 900 N/m3
156
PROBLEM 3.85
Situation: A weather balloon is described in the problem statement.
Find: Maximum altitude of balloon.
Assumptions: &0 = 288 K
ANALYSIS
Initial Volume
,"0 = (0$6)130
= (0$6) (1m)3
= 0!524 m3
Ideal gas law
#0IHe =%0IHe"He&0
=111' 300
(2077)(288)
= 0!186 kg/m3
Conservation of mass/0 = /alt.
,"0 #0IHe = ,"alt. #He,"alt. = ,"0
L0"HeLHe
EquilibriumX
H; = 0
Hbuoy. ". = 0
,"alt. #air) " (/) + .He) = 0
Eliminate V–alt.
(,"0 #0$#He)#air) = (/) + ,"0 #0IHe))
Eliminate #’s with equation of state
(,0#0)(%alt.$"air))
(%alt. + 10' 000)$("He)= (mg + ,0#0))
(0!524)(0!186)(9!81)(2077)%alt.(%alt. + 10' 000)(287)
= (0!1)(9!81) + (0!524)(0!186)(9!81)
Solve%alt. = 3888 Pa
157
Check to see if %alt. is in the troposphere or stratosphere. Using Eq. (3.15) solve forpressure at top of troposphere.
% = %0
·&0 " T(R " R0)
&0
¸D*HF
= 101' 300[(296" 5!87× 10"3)(13' 720)$296]54823
= 15' 940 Pa
Because %alt. G %at top of troposphere we know that %alt. occurs above the stratosphere.The stratosphere extends to 16.8 km where the temperature is constant at -57.5oC.The pressure at the top of the stratosphere is given by Eq. (3.16)
% = %0="(;";0)D*F-
= 15!9 exp("(16' 800" 13' 720)× 9!81$(287× 215!5))= 9!75 kPa
Thus the balloon is above the stratosphere where the temperature increases linearlyat 1.387oC/km. In this region the pressure varies as
% = %0
·&0 + T(R " R0)
&0
¸"D*HF
Using this equation to solve for the altitude, we have
3888
9750=
·215!5 + 1!387× (R " 16!8)
215!5
¸"9481*(04001387×287)
0!399 = [1 + 0!00644× (R " 16!8)]"2446
R = 22!8 km
158
PROBLEM 3.86
Situation: A rock is described in the problem statement.
Find: Volume of rock.
ANALYSIS
," ( = 918 N
," (( " 9' 810) = 609 N
," = (918" 609)$9' 810
," = 0!0315 m3
159
PROBLEM 3.87
Situation: A rod is described in the problem statement.
Find: Describe the liquid.
ANALYSIS
Rod weight = (22I(M + 2I(2#M )))
= 42I(M)
= 42I(M
Buoyancy force
Buoyant force G ," (Liq = 32I(LiqRod weight = Buoyant force
42I(M G 32I(Liq(Liq F (4$3)(M .
The liquid is more dense than water so is answer c).
160
PROBLEM 3.88
Situation: A person oating is a boat with an aluminum anchor.
Find: Change of water level in pond in the pond.
ANALYSIS
Weight anchor = 0.50 ft3 × (2!2× 62!4 lb/ft3) = 68!65 lb.The water displaced by boat due to weight of anchor
= 68!65 lb/(62.4 lb/ft3) = 1!100 ft3
Therefore, when the anchor is removed from the boat, the boat will rise and the waterlevel in the pond will drop:
!M = 1!10 ft3$500 ft2 = 0!0022 ft
However, when the anchor is dropped into the pond, the pond will rise because of thevolume taken up by the anchor. This change in water level in the pond will be:
!M = 0!500 ft3$500 ft2 = !001 ft
Net change =-.0022 ft + .001 ft = -.0012 ft = -.0144 in.The pond level will drop 0.0144 inches.
161
PROBLEM 3.89
Situation: An inverted cone containing water is described in the problem statement.
Find: Change of water level in cone.
ANALYSIS
6 = 0!6 =! (block = 0!6(water
Weight of displaced water = weight of block
,"M (M = ,"0 (0,"M = ((0$(M ),"0,"M = 0!6,"0 = 120 cm3
Then the total volume below water surface when block is oating in water = V–MIorg. + 120 cm3
,"MIorig. = (0$3)(10 cm)3
= 1047!2 cm3
,"nal = 1047!2 cm3 + 120 cm3
(0$3)M3nal = 1167!2 cm3
Mnal = 10!368 cm
!M = 0!368 cm
162
PROBLEM 3.90
Situation: Concrete cylindrical shells are described in the problem statement.
Find: Height above water when erected.
ANALYSIS
The same relative volume will be unsubmerged whatever the orientation; therefore,
$ L
h
sV
usV
,"u.s.,"s
=MI
2I=2Iu.s.2I
or M$2 = Iu.s.$I
Also,
cos K = 50$100 = 0!50
K = 60! and 2K = 120!
SoIu.s. = (1$3)0"
2 "" cos 60!" sin 60!
Therefore
M$2 = "2 [((1$3)0)" sin 60! cos 60!)] $0"2 = 0.195
M = 7!80 m
163
PROBLEM 3.91
Situation: A cylindrical tank is described in the problem statement.
Find: Change of water level in tank.
ANALYSIS
!,"M (M = . block
!,"M = 2 lbf/(62.4 lbf/ft3) = 0!03205 ft3
! !MI- = !,"M!M = !,"M $IN = 0!03205 ft3$((0$4)(12) ft2)!M = 0!0408 ft
Water in tank will rise 0.0408 ft.
164
PROBLEM 3.92
Situation: A oating platform is described in the problem statement.
Find: Length of cylinder so that it oats 1 m above water surface.
ANALYSIS
XH3 = 0
"30' 000" 4× 1' 0002+ 4× (0$4)× 12 × 10' 000(2" 1) = 0
2 = 2!24 m
165
PROBLEM 3.93
Situation: A oating block is described in the problem statement.
Find: Depth block will oat.
Assumptions: The block will sink a distance ? into the uid with 6 = 1!2.
ANALYSIS
XH3 = 0
". + %I = 0
"(62)2 × 32× 0!8(water + (2× (water + ? × 1!2(M )3622 = 0
? = 1!1672
A = 2!1672
166
PROBLEM 3.94
Situation: A cylindrical tank holds water. Water depth is 2 ft (before addition ofice). Cylinder is 4 ft high and 2 ft in diameter. A 5 lbm chunk of ice is added tothe tank.
Find: (a) Change of water level in tank after ice is added, (b) change in water levelafter the ice melts, (c) explain all processes.
ANALYSIS
Change in water level (due to addition of ice)
.ice = Hbuoyancy
= !,—M(M
So
!,—M =.ice
(M=
5 lbf
62!4 lbf$ ft3
= 0!0801 ft3
Rise of water in tank (due to addition of ice)
!M =!,—MIcyl
=0!0801 ft3
(0$4)(2 ft)2= 0!02550 ft = 0!3060 in
!M = 0!306 in G== (due to addition of ice)
Answer ! When the ice melts, the melted water will occupy the same volume ofwater that the ice originally displaced; therefore, there will be no change in watersurface level in the tank after the ice melts.
167
PROBLEM 3.95
Situation: A partially submerged wood pole is described in the problem statement.
Find: Density of wood.
ANALYSIS
+= = 0
".wood × (0!52 cos 30!) + H>. × (5$6)2 cos 30! = 0
"(wood ×I2× (0!52 cos 30!) + ((1$3)I2(H2O)× (5$6)2 cos 30
! = 0
(wood = (10$18)(H2O(wood = 5' 450 N/m
3
#wood = 556 kg/m3
168
PROBLEM 3.96
Situation: A partially submerged wood pole is described in the problem statement.
Find: If pole will rise or fall.
ANALYSIS
Sum moments about I to see if pole will rise or fall. The forces producing momentsabout I will be the weight of the pole and the buoyant force.
W
FB
X+= = "(1$2)(2 cosT)(2(,I) + (3$4)(2 cosT)(2$2)(liqI
= 22I cosT["(1$2)(, + (3$8)(liq]= <("80 + 75)
A negative moment acts on the pole; therefore, it will fall.
169
PROBLEM 3.97
Situation: A oating ship is described in the problem statement.
Find: How much the ship will rise or settle.
ANALYSIS
Draft = (38' 000× 2' 000)$40' 000(
=1900
(ft
Since ( of salt water is greater than ( of fresh water, the ship will take a greater draftin fresh water.
(1900$62!4)" (1900$64!1) = 0.808 ft
170
PROBLEM 3.98
Situation: A submerged spherical buoy is described in the problem statement.
Find: Weight of scrap iron to be sealed in the buoy.
ANALYSIS
XH? = 0;H> " H& " H% " H1 = 0H& = H> " H% " H1
= (4$3)0(0!6)3 × 10' 070" 1600" 4' 500
H& = 3010 N of scrap
171
PROBLEM 3.99
Situation: A balloon used to carry instruments is described in the problem statement.
Find: Diameter of spherical balloon.
Assumptions: Standard atmospheric temperature condition.
APPROACH
Apply buoyancy force and the ideal gas law.
ANALYSIS
W
FB
WI
Ideal gas law
& = 533" 3!221× 10"3 × 15' 000 = 485"#air = (8!3× 144)$(1' 715× 485)
= 0!001437 slugs/ft3
#He = (8!3× 144)$(12' 429× 485)= 0!000198 slugs/ft3
Equilibrium
XH = 0
= HE " H0 " H#= (1$6)013)(#air " #He)" 01
2(0!01)" 10= 13 × 16!88(14!37" 1!98)10"4 "12 × 3!14× 10"2 " 10
1 = 8!35 ft
172
PROBLEM 3.100
Situation: A buoy is described in the problem statement.
Find: Location of water level.
ANALYSIS
The buoyant force is equal to the weight.
H> =.
The weight of the buoy is 9!81× 460 = 4512 N.The volume of the hemisphere at the bottom of the buoy is
, =1
2
0
613 =
0
1213 =
0
12m3
The buoyant force due to the hemisphere is
H> =0
12(9!81)(1010) = 2594 N
Since this is less than the buoy weight, the water line must lie above the hemisphere.Let M is the distance from the top of the buoy. The volume of the cone which liesbetween the top of the hemisphere and the water line is
, =0
332!M! "
0
332M =
0
3(0!52 × 0!866" M3 tan2 30)
= 0!2267" 0!349M3
The additional volume needed to support the weight is
, =4512" 25949!81× 1010
= 0!1936 m3
Equating the two volumes and solving for M gives
M3 =0!0331
0!349= 0!0948 m3
M = 0!456 m
173
PROBLEM 3.101
Situation: A hydrometer is described in the problem statement.
Find: Weight of hydrometer.
ANALYSIS
Hbuoy. = . .
," (M = .
(1 cm3 + (5!3 cm)(0.01 cm2))(0!13) m3$cm3((M ) = . .
(1!53 cm3)(10"6 m3$cm3)(9810 N/m3) = . .
. = 1!50× 10"2 N
174
PROBLEM 3.102
Situation: A hydrometer is described in the problem statement.
Find: Specic gravity of oil.
ANALYSIS
Hbuoy. = .
(1 cm3 + (6!3 cm)(0.1 cm2))(0!013) m3$cm3(oil = 0!015 N
(1 + 0!63)× 10"6 m3(oil = 0!015 N
(oil = 9202 N/m3
6 = (oil$(M= 9202$9810
6 = 0!938
175
PROBLEM 3.103
Situation: A hydrometer is described in the problem statement.
Find: Weight of each ball.
ANALYSIS
Equilibrium (for a ball to just oat, the buoyant force equals the weight)
H> =. (1)
Buoyancy force
H> =
µ013
6
¶(uid (2)
Combine Eq. (1) and (2) and let 1 = 0!01m!
. =
µ013
6
¶6(water
=
Ã0 (0!01)3
6
!6 (9810)
= 5!136× 10"36 (3)
The following table (from Eq. 3) shows the weights of the balls needed for the requiredspecic gravity intervals.
ball number 1 2 3 4 5 6sp. gr. 1!01 1!02 1!03 1!04 1!05 1!06
weight (mN) 5!19 5!24 5!29 5!34 5!38 5!44
176
PROBLEM 3.104
Situation: A hydrometer is described in the problem statement.
Find: Range of specic gravities.
ANALYSIS
When only the bulb is submerged;
H> = . .
(0$4)£0!022 × 0!08
¤× 9810× 6 = 0!035× 9!81
6 = 1!39
When the full stem is submerged;
(0$4)£(0!02)2 × (0!08) + (0!01)2 × (0!08)
¤9' 810× 6
= 0!035× 9!816 = 1!114
Range 1.114 to 1.39
177
PROBLEM 3.105
Situation: A hydrometer is described in the problem statement.
Find: Design a hydrometer to measure the specic weight of liquids.
Assumptions: The hydrometer will consist of a stem mounted on a spherical ball asshown in the diagram. Assume also for purposes of design than the diameter of thestem is 0.5 in and the maximum change in depth is 2 in.
ANALYSIS
½ in
2 in
Since the weight of the hydrometer is constant, the volumes corresponding to thelimiting uid specic weights can be calculated from
. = (60,"60 = (70,"70or
,"70,"60
=60
70= 0!857
The change in volume can be written as
,"60 ","70 = ,"60 (1","70,"60
) = 0!143,"60
The change in volume is related to the displacement of the uid on the stem by
I!M
,"60= 0!143
For the parameters given above the volume of the hydrometer when immersed inthe 60 lbf/ft3 liquid is 2.74 in3! Assume there is one inch of stem between the lowermarking and the top of the spherical ball so the volume of the spherical ball would be2.55 in3 which corresponds to a ball diameter of 1.7 in. The weight of the hydrometerwould have to be
. = (60,"60 = 0!0347 lbf/in3 × 2!74 in3 = 0!095 lbf
If one could read the displacement on the stem to within 1/10 in, the error would inthe reading would be 5%.Other designs are possible. If one used a longer stem displacement, a larger volumehydrometer would be needed but it would give better accuracy. The design willdepend on other constraints like the volume of uid and space available.
178
PROBLEM 3.106
Situation: A barge is described in the problem statement.
Find: Stability of barge.
ANALYSIS
Draft = 400' 000$(50× 20× 62!4)= 6!41 ft G 8 ft
GM = V00$,""CG=
£(50× 203$12)$(6!41× 50× 20)
¤" (8" 3!205)
= 0!40 ft
Will oat stable
179
PROBLEM 3.107
Situation: A oating body is described in the problem statement.
Find: Location of water line for stability and specic gravity of material.
ANALYSIS
For neutral stability, the distance to the metacenter is zero. In other words
X+ =V!!,""X- = 0
where X- is the distance from the center of gravity to the center of buoyancy.
Moment of inertia at the waterline
V!! =Y32
12
where 2 is the length of the body. The volume of liquid displaced is MY2 so
X- =Y32
12MY2=Y2
12M
The value for X- is the distance from the center of buoyancy to the center of gravity,or
X- =Y
2"M
2
SoY
2"M
2=Y2
12Mor µ
M
Y
¶2"M
Y+1
6= 0
Solving for M$Y gives 0.789 and 0.211. The rst root gives a physically unreasonablesolution. Therefore
M
Y= 0!211
The weight of the body is equal to the weight of water displaced.
(0,0 = ((,
Therefore
6 =(0((=YM2
Y22=M
Y= 0.211
The the specic gravity is smaller than this value, the body will be unstable (oatstoo high).
180
PROBLEM 3.108
Situation: A block of wood is described in the problem statement.
Find: Stability.
ANALYSIS
draft = 1× 7500$9' 810 = 0!7645 mZfrom bottom = 0!7645$2 = 0!3823m
Metacentric height
X = 0!500 m; CG = 0!500" 0!3823 = 0!1177 mX+ = (V$,")"CG
= ((0"4$4)$(0!7645× 0"2))" 0!1177= 0!0818 m" 0!1177 m (negative)
Thus, block is unstable with axis vertical.
181
PROBLEM 3.109
Situation: A block of wood is described in the problem statement.
Find: Stability.
ANALYSIS
draft = 5,000/9,810
= 0.5097 m
Metacentric height
GM = V00$,""CG=
£(0 × 0!54$4)$(0!5097× 0 × 0!52)
¤" (0!5" 0!5097$2)
= "0!122 m, negative
So will not oat stable with its ends horizontal.
182
PROBLEM 3.110
Situation: A oating block is described in the problem statement.
Find: Stability.
ANALYSIS
Analyze longitudinal axis
GM = V00$,""CG= (34(24)3$(12×4 × 24 × 34))"4$2= "4$6
Not stable about longitudinal axis.
Analyze transverse axis.
GM = (24 × (34)3$(12×4 × 24 × 34))" 34$4= 0
Neutrally stable about transverse axis.Not stable
183
PROBLEM 4.1
Situation: The valve in a system is gradually opened to have a constant rate ofincrease in discharge.
Find: Describe the ow at points A and B.
ANALYSIS
B: Non-uniform, unsteady.
A: Unsteady, uniform.
184
PROBLEM 4.2
Situation: Water ows in a passage with ow rate decreasing with time.
Find: Describe the ow.
ANALYSIS
(b) Unsteady and (d) non-uniform.
(a) Local and (b) convective acceleration.
185
PROBLEM 4.3
Situation: A ow pattern has converging streamlines.
Find: Classify the ow.
ANALYSIS
Non-uniform; steady or unsteady.
186
PROBLEM 4.4
Situation: A uid ows in a straight conduit. The conduit has a section with constantdiameter, followed by a section with changing diameter.
Find: Match the given ow labels with the mathematical descriptions.
ANALYSIS
Steady ow corresponds to [,&$[P = 0Unsteady ow corresponds to [,&$[P 6= 0Uniform ow corresponds to ,&[,&$[9 = 0Non-uniform ow corresponds to ,&[,&$[9 6= 0
187
PROBLEM 4.5
Situation: Pathlines are shown in gure. Discharge is constant and ow is nonturbu-lent.
Find: Describe the ow.
ANALYSIS
True statements: (a), (c).
188
PROBLEM 4.6
Situation: Dye is injected into a ow eld. The streakline is shown.
Find: Draw a pathline of the particle.
ANALYSIS
The streakline shows that the velocity eld was originally in the horizontal directionto the right and then the ow eld changed upward to the left. The pathline startso! to the right and then continues upward to the left.
189
PROBLEM 4.7
Situation: A hypothetical ow has the following characteristics:For 0 ' P ' 5 seconds, @ = 2 m/s, ; = 0For 5 G P ' 10 seconds, @ = 3 m/s, ; = "4 m/s
At time zero a dye streak was started, and a particle was released.
Find: For P = 10 s, draw to scale the streakline, pathline of the particle, and stream-lines.
ANALYSIS
From 0GtG5, the dye in the streakline moved to the right for a distance of 10 m. Atthe same time a particle is released from the origin and travels 10 m to the right.Then from 5GtG10, the original line of dye is transported in whole downward to theright while more dye is released from the origin. The pathline of the particle proceedsfrom its location at t=5 sec downward to the right.At 10 sec, the streamlines are downward to the right.
190
PROBLEM 4.8
Situation: A dye streak is produced in a ow that has a constant speed. The originof the streak is point A, and the streak was produced during a 10 s interval.
Find: (a) Sketch a streamline at P = 8 s.(b) Sketch a particle pathline at P = 10 s (for a particle that was released from pointA at time P = 2 s).
ANALYSIS
At 8 seconds (near 10 sec) the streamlines of the ow are horizontal to the right.
Streamlines at P = 8 s
Initially the ow is downward to the right and then switches to the horizontal directionto the right. Thus one has the following pathline.
Particle pathline for a particle released at P = 2 s
191
PROBLEM 4.9
Situation: A periodic ow eld is described in which streamline pattern changes everysecond and repeats every two seconds.
Find: Sketch a streakline at P = 2!5 s.
ANALYSIS
From time P = 0 to P = 1 s dye is emitted from point A and will produce a streakthat is 10 meters long (up and to the right of A). See Fig. A below. In the nextsecond the rst streak will be transported down and to the right 10 meters and a newstreak, 10 ft. long, will be generated down and to the right of point A (see Fig. Bbelow). In the next 0.5 s streaks in Fig. B will move up and to the right a distanceof 5 meters and a new streak 5 meters in length will be generated as shown in Fig.C.
192
PROBLEM 4.10
Situation: The gure below shows a pathline and a particle line for a ow. Theuid particle was released from point A at P = 0 s. The streakline was produced byreleasing dye from point A from P = 0 to 5 s.
Find: (a)Sketch a streamline for P = 0 s.(b) Describe the ow as steady or unsteady.
ANALYSIS
In the above sketch, the dye released at P = 0 s is now at point B. Therefore, astreamline corresponding to P = 0 s should be tangent to the streakline at point B.We can reach the same conclusion by using the pathline.
In the above sketch, the path of a uid particle at P = 0 s is shown by the dotted lineat point A. There, a streamline corresponding to P = 0 s should be tangent to thepathline at point A. Thus, streamlines at P = 0 appear as shown below:
The ow is unsteady because the streakline, streamlines and pathlines di!er.
193
PROBLEM 4.11
Situation: A velocity eld is dened by @ = 5 m/s and ; = "2P m/s, where t is time.
Find: (a) Sketch a streakline for P = 0 to 5 s.(b) Sketch a pathline for a particle for P = 0 to 5 s. The particle is released from thesame point as the dye source.(c) Sketch streamlines at P = 5 s.
ANALYSIS
Particle pathline.Since @ = AE$AP, we may write AE = @AP! This can be integrated to give the x-positionof a particle at any time P:
E = E! +
Z@AP = E! +
Z5AP
E = E! + 5P
Similarly,
? = ?! +
Z;AP = 0 +
Z"2PAP
? = ?! " P2
Letting E! = ?! = 0'we can construct a table of coordinates
t (s) x (m) y(m)0 0 01 5 -12 10 -43 15 -94 20 -165 25 -25
The (E' ?) data from this table are plotted in the gure below
194
Streakline.
To construct the streakline, solve for the displacement of dye particles. The dyeparticle released at time P = 1 s will reach a position given by
E = E! +
Z 5
1
@AP
= 0 +
Z 5
1
5AP = 21
? = ?! +
Z 5
1
;AP
= 0 +
Z 5
1
"2PAP = 0" P2|51 = "24
The dye particle released at time P = 2 s will reach a position given by
E = 0 +
Z 5
2
5AP = 15
? = 0 +
Z 5
2
"2PAP = "21
Performing similar calculations for each time yields the coordinates of the streakline.These results are plotted in the above gure.Streamlines (at P = 5 s)
Dye released at P = 5 s is at point A in the sketch above. Therefore,a streamlinecorresponding to P = 5 s should be tangent to the streakline at point A. We can reachthe same conclusion by using the pathline. The path of a uid particle at P = 5 s isat point B. There, a streamline corresponding to P = 0 s should be tangent to thepathline at point B. The streamlines are shown below
Animation An animation of the solution can be found athttp://www.justask4u.com/csp/crowe.
195
PROBLEM 4.12
Situation: Fluid ows along a circular path. It rst moves in the clockwise directionat 0 rad/s for 1 second and then reverses direction with the same rate.
Find: (a) Draw a pathline at time P = 2 s!(b) Draw a streakline at time P = 2 s!
ANALYSIS
Pathline
For the rst second the particle will follow the circular streamline (clockwise) throughan angle of 0 radians (1/2 circle). Then for the 2nd second the particle reverses itsoriginal path and nally ends up at the starting point. Thus, the pathline will beshown:
Streakline
For the rst second a stream of dye will be emitted from staring point and the streakfrom this dye will be generated clockwise along the streamline until the entire top halfcircle will have a steak of dye at the end of 1 second. When the ow reverses a newdye streak will be generated on the bottom half of the circle and it will be superposedon top of the streak that was generated in the rst second. The streakline is shownfor t=1/2 sec., 1 sec. & 2 sec.
Animation An animation of the solution can be found athttp://www.justask4u.com/csp/crowe.
196
PROBLEM 4.13
Situation: Fluid ows in a three-dimensional ow eld. The uid moves in each ofcoordinate directions at 1 m/s for one second.
Find: (a) Sketch a pathline on a three dimensional coordinate at time P = 3 s!(b) Sketch a streakline at time P = 2 s!
ANALYSIS
The nal pathline and streakline are shown below.
x x
y y
z zPathline Streakline
197
PROBLEM 4.14
Situation: A droplet moves from location A to B in a uniform ow eld leaving atrail of vapor.
Find: Sketch the location of the vapor trail.
ANALYSIS
The vapor will produce a vapor trail as shown.
A
Vapor is transport from the droplet in the ow direction as the droplet proceedsupward to the right.
198
PROBLEM 4.15
Situation: Fluid ows in a two dimensional ow eld with @ = 20P2 and ; = 30P1*2!The period of time is 0 ' P ' 1! The pathline and streakline begin at the origin.
Find: Write a computer program to give the coordinates of (a) streakline and (b)pathline.
ANALYSIS
The computed streaklines and pathline are shown below.
x-coordinate
0 2 4 6 8
y co
ordi
nate
0
5
10
15
20
25
Pathline
Streakline
In FORTRAN:Dimension statementsInitial valuesdo 10 i=1,Nt=t+dtu=20*t**2v=30*sqrt(t)xp(i+1)=xp(i)+u*dtyp(i+1)=yp(i)+v*dtdo 20 j=i,1,-1xs(j+1)=xs(j)+u*dtys(j+1)=ys(j)+v*dt
20 continue10 continue
199
PROBLEM 4.16
Situation: A series of ows are described in the problem statement.
Find: Classify the ows as one dimensional, two dimensional, or three dimensional.
ANALYSIS
a. Two dimensional e. Three dimensionalb. One dimensional f. Three dimensionalc. One dimensional g. Two dimensionald. Two dimensional
200
PROBLEM 4.17
Situation: Flow past a circular cylinder with constant approach velocity.
Find: Describe the ow as:(a) Steady or unsteady.(b) One dimensional, two dimensional, or three dimensional.(c) Locally accelerating or not, and is so, where.(d) Convectively accelerating or not, and if so, where.
ANALYSIS
(a) Steady.(b) Two-dimensional.(c) No.(d) Yes, convective acceleration is present at all locations where the streamlinescurve. Also, convective acceleration is present at each where a uid particles changesspeed as it moves along the streamline.
201
PROBLEM 4.18
Situation: A ow with this velocity eld: @ = EP+ 2?' ; = EP2 " ?P' Y = 0!
Find: Acceleration, a' at location (1,2) and time P = 3 seconds.
ANALYSIS
Acceleration in the x-direction
C$ = @[@$[E+ ;[@$[? + Y[@$[R + [@$[P
= (EP+ 2?)(P) + (EP2 " ?P)(2) + 0 + E
At E = 1 m' ? = 2 m and P = 3 s
C$ = (3 + 4)(3) + (9" 6)(2) + 1 = 21 + 6 + 1 = 28 m/s2
Acceleration in the y-direction
C3 = @[;$[E+ ;[;$[? + Y[;$[R + [;$[P
= (EP+ 2?)(P2) + (EP2 " ?P)("P) + 0 + (2EP" ?)
At E = 1 m' ? = 2 m and P = 3 s
C3 = (3 + 4)(9) + (9" 6)("3) + (6" 2) = 63" 9 + 4 = 58 m/s2
a = 28 i+ 58 j m/s2
202
PROBLEM 4.19
Situation: Air is owing around a sphere. The x-component of velocity along thedividing streamline is given by @ = "\!(1" 33!$E3)!
Find: An expression for the x-component of acceleration (the form of the answershould be C$ = C$ (E' 3!' \!)).
ANALYSIS
C$ = @[@$[E+ [@$[P
= "\0(1" 330$E3)[$[E("\0(1" 330$E
3)) + [$[P("\0(1" 330$E3))
= \20 (1" 330$E
3)("3330$E4) + 0
C$ = "(3\20 330 $ E4)(1" 330 $ E3)
203
PROBLEM 4.20
Situation: A velocity eld at 3 = 10 m where ,O = 10P!
Find: Magnitude of acceleration at 3 = 10 m and P = 1 s.
ANALYSIS
,O = 10P
Ctang. = ,O[,O$[9+ [,O$[P
Ctang. = 0 + 10 m/s2
Cnormal = , 2O $3
= (10P)2$3 = 100P2$10 = 10P2
at P = 19
Cnormal = 10 m/s2
Ctotal =qC2tang. + C
2normal =
&200
Ctotal = 14!14 m/s2
204
PROBLEM 4.21
Situation: Flow occurs in a tapered passage. The velocity is given as
, = ]$I
and] = ]! "]1
P
P!
The point of interest is section AA, where the diameter is 50 cm. The time of interestis 0.5 s.
Find: (a) Velocity at section AA: ,(b) Local acceleration at section AA: C<(c) Convective acceleration at section AA: C1
ANALYSIS
] = ]0 "]1P$P0 = 0!985" 0!5P (given)
, = ]$I (given)[,
[9= +2
msper m (given)
The velocity is
, = ]$I
= (0!985" 0!5× 0!5)$(0$4× 0!52)
, = 3!743 m/s
Local acceleration
C< = [,$[P = [$[P(]$I)
= [$[P((0!985" 0!5P)$(0$4× 0!52))= "0!5$(0$4× 0!52)
C< = "2!55 m/s2
Convective acceleration
C1 = , [,$[9
= 3!743× 2C1 = +7!49 m/s2
205
PROBLEM 4.22
Situation: One-dimensional ow occurs in a nozzle. Velocity varies linearly from 1ft/s at the base to 4 ft/s at the tip. The nozzle is 18 inches long.
Find: (a) Convective acceleration: C1(b) Local acceleration: C<
ANALYSIS
Velocity gradient
A,$A9 = (,tip " ,base)$2= (4" 1)$1!5= 2 s"1
Acceleration at mid-point
, = (1 + 4)$2
= 2!5 ft/s
C1 = ,A,
A9= 2!5× 2
C1=5 ft/s2
Local acceleration
C< = 0
206
PROBLEM 4.23
Situation: One-dimensional ow occurs in a nozzle and the velocity varies linearlywith distance along the nozzle. The velocity at the base of the nozzle is 1P (ft/s) and4P (ft/s) at the tip.
Find: Local acceleration midway in the nozzle: C<
ANALYSIS
C< = [,$[P
, = (P+ 4P)$2
= 2!5P (ft/s)
Then
C< = [$[P(2!5P)
a<=2.5 ft/s2
207
PROBLEM 4.24
Situation: Flow in a two-dimensional slot with
, = 2³^!>
´µ PP!
¶
Find: An expression for local acceleration midway in nozzle: C2
ANALYSIS
, = 2
µ^!>
¶µP
P!
¶but > = D$2
, =
µ4^!D
¶µP
P!
¶
C2 = [,$[P
C2=4^!$(DP!)
208
PROBLEM 4.25
Situation: Flow in a two-dimensional slot and velocity varies as
, = 2³^!>
´µ PP!
¶
Find: An expression for convective acceleration midway in nozzle: C1
ANALYSIS
C1 = , [,$[E
The width varies as> = D " E$8
, = (^0$P0)2P(D " E$8)"1
[,$[E = (^0$P0)2P(1$8)(D " E$8)"2
C1 = , [,$[E = , (^0$P0)24P2(1$8)$(D " (1$8)E)"3
At E = 2D
C1 = (1$2)(^0$P0)2P2$((3$4)D)3
C1 = 32$27(^0$P0)2P2$D3
209
PROBLEM 4.26
Situation: Water ow in a nozzle with
, = 2P$(1" 0!5E$_)2
Find: With 2 = 4 ft, and E = 0!52 and P = 3 s, nd (a) the local acceleration and(b) the convective acceleration
ANALYSIS
C< = [,$[P
= [$[P[2P$(1" 0!5E$2)2]= 2$(1" 0!5E$2)2
= 2$(1" 0!5× 0!52$2)2
C< = 3!56 ft/s2
C1 = , ([,$[E)
= [2P$(1" 0!5E$2)2][$[E[2P$(1" 0!5E$2)2]= 4P2$((1" 0!5E$2)52)= 4(3)2$((1" 0!5× 0!52$2)54)
C1 = 37!9 ft/s2
210
PROBLEM 4.27
Situation: Flow through an inclined pipe at 30o from horizontal and decelerating at0.3g.
Find: Pressure gradient in ow direction.
APPROACH
Apply Euler’s equation.
ANALYSIS
!
30o
Euler’s equation
[$[L(%+ (R) = "#C<[%$[L+ ([R$[L = "#C<
[%$[L = "#C< " ([R$[L= "(($))× ("0!30))" ( sin 30!
= ((0!30" 0!50)
[%$[L = "0!20(
211
PROBLEM 4.28
Situation: Kerosene (S=0.80) is accelerated upward in vertical pipe at 0.2g.
Find: Pressure gradient required to accelerate ow.
APPROACH
Apply Euler’s equation.
ANALYSIS
Applying Euler’s equation in the R-direction
[(%+ (R)$[R = "#C; = "(($))× 0!20)[%$[R + ( = "0!20(
[%$[R = (("1" 0!20)= 0!80× 62!4("1!20)
[%$[R = "59!9 lbf/ft3
212
PROBLEM 4.29
Situation: A hypothetical liquid with zero viscosity and specic weight of 10 kN/m3
ows through a vertical tube. Pressure di!erence is 12 kPa.
Find: Direction of acceleration.
APPROACH
Apply Euler’s equation.
ANALYSIS
Euler’s equation
#C< = "[$[L(%+ (R)C< = (1$#)("[%$[L" ([R$[L)
Let L be positive upward. Then [R$[L = +1 and [%$[L = (%= " %>)$1 = "12' 000Pa/m. Thus
C< = ()$()(12' 000" ()C< = )((12' 000$()" 1)C< = )(1!2" 1!0) m/s2
C< has a positive value; therefore, acceleration is upward. Correct answer is a).
213
PROBLEM 4.30
Situation: A piston and water accelerating upward at 0.5g.
Find: Pressure at depth of 2 ft. in water column.
APPROACH
Apply Euler’s equation.
ANALYSIS
Euler’s equation
#C< = "[$[L(%+ (R)
Let L be positive upward.
#(0!5 g) = "[%$[L" ([R$[L(($g)(0!5g) = "[%$[L" ((1)
[%$[L = "((0!5 + 1) = "1!5(
Thus the pressure decreases upward at a rate of 1.5(! At a depth of 2 ft.:
%2 = (1!5()(2) = 3(
= 3 ft.× 62!4 lbf/ft3
%2 = 187!2 psfg
214
PROBLEM 4.31
Situation: Water stands with depth of 10 ft in a vertical pipe open at top and sup-ported by piston at the bottom.
Find: Acceleration of piston to create a pressure of 9 psig immediately above piston.
APPROACH
Apply Euler’s equation.
ANALYSIS
Euler’s equation
[$[9(%+ (R) = "#C&
Take 9 as vertically upward with point 1 at piston surface and point 2 at water surface.
"!(%+ (R) = #C&!9
"(%2 " %1)" ((R2 " R1) = #C&!9
"(0" 9× 144)" 62!4× 10 = 1!94× 10C&C& = (9× 144" 62!4× 10)$19!4
C& = 34!6 ft/s2
215
PROBLEM 4.32
Situation: Water accelerates at 6m$ s2 in a horizontal pipe.
Find: Pressure gradient.
APPROACH
Apply Euler’s equation.
ANALYSIS
Euler’s equation with no change in elevation
([%$[9) = "#C&= "1' 000× 6
[%$[9 = "6' 000 N/m3
216
PROBLEM 4.33
Situation: Water accelerated from rest in horizontal pipe, 100 m long and 30 cm indiameter, at 6 m/s2. Pressure at downstream end is 90 kPa gage.
Find: Pressure at upstream end.
APPROACH
Apply Euler’s equation.
ANALYSIS
Euler’s equation with no change in elevation
([%$[9) = "#C&= "1' 000× 6= "6' 000 N/m3
%downstream " %upstream = ([%$[9)!9
%upstream = 90' 000 + 6' 000× 100= 690' 000 Pa, gage
%upstream = 690 kPa, gage
217
PROBLEM 4.34
Situation: Water stands at depth of 10 ft in a vertical pipe closed at the bottom bya piston.
Find: Maximum downward acceleration before vaporization assuming vapor pressureis zero (abs).
APPROACH
Apply Euler’s equation.
ANALYSIS
Applying Euler’s equation in the R-direction with % = 0 at the piston surface
[$[R(%+ (R) = "#C;!(%+ (R) = "#C;!R
(%+ (R)at water surface " (%+ (R)at piston = "#C;(Rsurface " Rpiston)%atm " %@ + ((Rsurface " Rpiston) = "12 #C;
14!7× 144" 0 + 62!4(10) = "10× 1!94C;C; = "141!3 ft/s2
218
PROBLEM 4.35
Situation: A liquid with zero viscosity and specic weight of 100 lbf/ft3 ows througha conduit. Pressure are given at two points.
Find: Which statements can be discerned with certainty.
APPROACH
Apply Euler’s equation.
ANALYSIS
Euler’s equation
"[$[L(%+ (R) = #C<"[%$[L" ([R$[L = #C<
where [%$[L = (%> " %=)$L = (100" 170)$2 = "35 lb/ft3 and [R$[L = sin 30! = 0!5!Then
C< = (1$#)(35" (100)(0!5))= (1$#)("15 ) lbf/ft3
• Because C< has a negative value we conclude that Answer ! (d) the accelera-tion is in the negative L direction .
• Answer ! The ow direction cannot be established; so answer (d) is the onlyanswer that can be discerned with certainty.
219
PROBLEM 4.36
Situation: Velocity varies linearly with distance in water nozzle.
Find: Pressure gradient midway in the nozzle.
APPROACH
Apply Euler’s equation.
ANALYSIS
Euler’s equationA$AE(%+ (R) = "#C$
but R =const.; therefore
A%$AE = "#C$C$ = Cconvective = , A,$AE
A,$AE = (80" 30)$1 = 50 s"1,mid = (80 + 30)$2 = 55 ft/s
= (55 ft/s)(50 ft/s/ft) = 2' 750 ft/s2
Finally
A%$AE = ("1!94 slug/ft3)(2' 750 ft/s2)
A%$AE = "5' 335 psf/ft
220
PROBLEM 4.37
Situation: Tank accelerated in x-direction to maintain liquid surface slope at -5/3.
Find: Acceleration of tank.
APPROACH
Apply Euler’s equation.
ANALYSIS
Euler’s equation. The slope of a free surface in an accelerated tank.
tanT = C$$)
C$ = ) tanT
= 9!81× 3$5
C$ = 5!89 m/s2
221
PROBLEM 4.38
Situation: Closed tank full of liquid accelerated downward at 1.5g and to the right at0.9g. Specic gravity of liquid is 1.1. Tank dimensions given in problem statement.
Find: (a) %) " %=!(b) %> " %=!
APPROACH
Apply Euler’s equation.
ANALYSIS
Euler’s equation Take L in the z-direction.
"A%
AL" (
AL
AL= #C2
(A%$AL) = "#() + C<)= "1!1× 1!94(32!2" 1!5× 32!2)= 34!4 psf/ft
%> " %= = "34!4× 4%> " %= = "137!6 psf
Take L in the x-direction. Euler’s equation becomes
"A%
AE= #C$
%) " %> = #C$2
= 1!1× 1!94× 0!9) × 3= 185!5 psf
%) " %= = %) " %> + (%> " %=)%) " %= = 185!5" 137!6
%) " %= = 47!9 lbf/ft2
222
PROBLEM 4.39
Situation: Closed tank full of liquid accelerated downward at 2/3g and to the right atone g. Specic gravity of liquid is 1.3. Tank dimensions given in problem statement
Find: (a) %) " %=!(b) %> " %=!
APPROACH
Apply Euler’s equation.
ANALYSIS
Euler’s equation in R direction
A%$AR + ( = "#C;A%$AR = "#() + C;)A%$AR = "1!3× 1' 000(9!81" 6!54)
= "4' 251 N/m3
%> " %= = 4' 251× 3= 12' 753 Pa
%> " %= = 12!753 kPa
Euler’s equation in E-direction
"A%
AE= #C$
%) " %> = #C$2
= 1!3× 1' 000× 9!81× 2!5= 31' 882 Pa
%) " %= = %) " %> + (%> " %=)%) " %= = 31' 882 + 12' 753
= 44' 635 Pa
%) " %= = 44!63 kPa
223
PROBLEM 4.40
Situation: Truck carrying tank with open top will not accelerate or decelerate morethan 8.02 ft/s2! Tank dimensions given in problem statement.
Find: Maximum depth before spilling.
APPROACH
Apply Euler’s equation.
ANALYSIS
Euler’s equation applied to slope of an accelerated free surface.
tanT = C$$) = 8!02$32!2 = 0!2491
tanT = M$9
M = 9 tanT = 9× 0!2491 = 2!242 ftdmax = 7" 2!242
dmax = 4!758 ft
224
PROBLEM 4.41
Situation: Truck carries cylindrical tank (axis vertical) and will not accelerate ordecelerate more than 1/3g. Truck also goes around unbanked curve with radius of 50m.
Find: Maximum depth that tank can be lled before spilling and maximum speed oncurve.
APPROACH
Apply Euler’s equation on straight section and on the unbanked curve.
ANALYSIS
d
D
D
%
Euler’s equation On straight section, the slope of a free surface is
tanT = C$$)
= (1$3))$)
= 1$3
tanT = 1$3 = (1 " A)$(0!51)thus A = 1 " (1$6)1 = (5$6)1
Tank can be 5/6 full without spilling
On unbanked curve
tanT = 1$3
Then 1$3 = C:$)
C: = (1$3))
, 2$3 = (1$3))
or , =p(1$3))3
, = 12!8 m/s
225
PROBLEM 4.42
Situation: An accelerating tank is described in the problem statement.
Find: Explain the conditions shown.
ANALYSIS
The correct choice is (b). The tank is placed on a vehicle with constant speedmoving about a circular track.
226
PROBLEM 4.43
Situation: Rectangular tank with opening at top corner carries oil (S=0.83) andaccelerates uniformly at 19.62 m/s2!Depth of oil at rest is 2 m. Tank dimensionsgiven in problem.
Find: Maximum pressure in tank during acceleration.
ANALYSIS
Euler’s equation The conguration for the liquid in the tank is shown in the diagram.
3 m
4 m
2 m
x
x+ 1.5x
The liquid surface intersects the bottom at a distance E from the right side. Thedistance in the x direction between the contact surface at the bottom and the top is3$ tanT = 1!5
tan K = C&$) = 2
area of air space = 4× 14 = 3× (E+ 1!5 + E)$2E = 0!583 m
The maximum pressure is at the bottom, left corner and is equal to
%max$( = (4" 0!583)= 0!83× 1000× 19!62× 3!417
%max = 55!6 kPa
227
PROBLEM 4.44
Situation: A water jet is described in the problem statement.
Find: Height M jet will rise.
APPROACH
Apply the Bernoulli equation from the nozzle to the top of the jet. Let point 1 bein the jet at the nozzle and point 2 at the top.
ANALYSIS
Bernoulli equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2
where %1 = %2 = 0 gage
,1 = 20 ft/s
,2 = 0
0 + (20)2$2) + R1 = 0 + 0 + R2
R2 " R1 = M = 400$64!4
M = 6!21 ft
228
PROBLEM 4.45
Situation: A pitot tube measuring airspeed on an airplane at 10,000 ft where thetemperature is 23oF and the pressure is 10 psia. The pressure di!erence is 10 inchesof water.
Find: Airspeed.
APPROACH
Apply the Pitot tube equation.
ANALYSIS
Pitot tube equation
, =p2!%;$#
!%; = (H2OMH2O
= 62!4× (10$12)= 52 psf
Ideal gas law
# = %$("& )
= (10)(144)$((1' 716)(483))
= 0!00174 slugs/ft3
, =
q2× 52 lbf/ft2$(0!00174 slugs/ft3)
, = 244 ft/s
229
PROBLEM 4.46
Situation: A stagnation tube in a tank is rotated in a tank 10 cm below liquid surface.Arm is 20 cm long and specic weight of uid is 10,000 N/m3!
Find: Location of liquid surface in central tube.
APPROACH
Pressure variation equation for rotating ow from pt. 1 to pt. 2 where pt. 1 is atliquid surface in vertical part of tube and pt. 2 is just inside the open end of the pitottube.
ANALYSIS
10 cm
1
Elevation view Plan view
0
2
Pressure variation equation- rotating ow
%1$( " , 21 $2) + R1 = %2$( " , 22 $2) + R20" 0 + (0!10 + L) = %2$( " 32J2$2) " 0 (1)
where R1 = R2! If we reference the velocity of the liquid to the tip of the pitot tubethen we have steady ow and Bernoulli’s equation will apply from pt. 0 (point aheadof the pitot tube) to point 2 (point at tip of pitot tube).
%0$( + ,20 $2) + R0 = %2$( + ,
22 $2) + R2
0!1($( + 32J2$2) = %2$( + 0 (2)
Solve Eqs. (1) & (2) for LL = 0 liquid surface in the tube is the same as the elevation as outside liquid surface.
230
PROBLEM 4.47
Situation: A glass tube with 90o bend inserted into a stream of water. Water in tuberises 10 inches above water surface.
Find: Velocity.
APPROACH
Apply the Bernoulli equation.
ANALYSIS
Hydrostatic equation (between stagnation point and water surface in tube)
%&(= M+ A
where A is depth below surface and M is distance above water surface.
Bernoulli equation (between freestream and stagnation point)
%&(
= A+, 2
2)
M+ A = A+, 2
2)
, 2
2)= M
, = (2× 32!2× 10$12)1*2
, = 7!33 fps
231
PROBLEM 4.48
Situation: A glass tube in a 3 m/s stream of water.
Find: Rise in vertical leg relative to water surface.
APPROACH
Apply the Bernoulli equation.
ANALYSIS
Apply hydrostatic equation between stagnation point and water surface in tube
%&(= M+ A
From application of the Bernoulli equation
%&(
= A+, 2
2)
M+ A = A+, 2
2)
M =, 2
2)
= 32$(2× 9!81)= 0!459 m
M = 45!9 cm
232
PROBLEM 4.49
Situation: A Bourdon tube gage attached to plate in 40 ft/s air stream.
Find: Pressure read by gage.
ANALYSIS
Because it is a Bourdon tube gage, the di!erence in pressure that is sensed will bebetween the stagnation point and the separation zone downstream of the plate.Therefore
!-, = 1" (-,Iback of plate)!-, = 1" (neg. number)
! !%$(#, 20 $2) = 1 + positive number
!% = (#, 20 $2)(1 + positive number)
Case (c) is the correct choice.
233
PROBLEM 4.50
Situation: An air-water manometer is connected to a Pitot tube to measure air ve-locity. Manometer deects 2 in. The air is at 60oF and 15 psia.
Find: Velocity.
APPROACH
Apply the Pitot tube equation calculate velocity. Apply the ideal gas law to solvefor density.
ANALYSIS
Ideal gas law
# = %$"&
= 15× 144$(1' 715)(60 + 460)= 0!00242 slugs/ft
Pitot tube equation, = (2!%;$#)
1*2
From the manometer equation
!%; = (%!M(1" ('$(%)
but ('$(% ¿ 1 so
, = (2(%!M$#)1*2
= (2× 62!4× (2!0$12)$0!00242)1*2
, = 92!7 fps
234
PROBLEM 4.51
Situation: A ow-metering device is described in the problem. Air has density of 1.2kg/m3 and a 10 cm deection of water measured on manometer.
Find: Velocity at station 2.
APPROACH
Apply the Bernoulli equation and the manometer equation.
ANALYSIS
Bernoulli equation%1$( + ,
21 $2) = %2$( + ,
22 $2) = %5$(
Manometer equation
%1 + 0!1× 9810"neglectz }| {
0!1× 1!2× 9!81 = %5
%5 " %1 = 981 N/m2 = #, 21 $2
, 21 = 2× 981$1!2,1 = 40!4 m/s
,2 = 2,1
V2=80.8 m/s
235
PROBLEM 4.52
Situation: A spherical Pitot tube is used to measure the ow velocity in water. Thevelocity at the static pressure tap is 1.5,!! The piezometric pressure di!erence is 3kPa.
Find: Free stream velocity: ,!
APPROACH
Apply the Bernoulli equation between the two points. Let point 1 be the stagnationpoint and point 2 at 90! around the sphere.
ANALYSIS
Bernoulli equation
%;1 + #,21 $2 = %;2 + #,
22 $2
%;1 + 0 = %;2 + #(1!5,0)2$2
%;1 " %;2 = 1!125#, 20, 20 = 3' 000$(1!125× 1' 000) = 2!67 m2$s2
,0 = 1!63 m/s
236
PROBLEM 4.53
Situation: A device for measuring the water velocity in a pipe consists of a cylinderwith pressure taps at forward stagnation point and at the back on the cylinder in thewake. A pressure di!erence of 500 Pa is measured.
Find: Water velocity: ,!
APPROACH
Apply the Bernoulli equation between the location of the two pressure taps. Let point1 be the forward stagnation point and point 2 in the wake of the cylinder.
ANALYSIS
The piezometric pressure at the forward pressure tap (stagnation point, -, = 1) is
%;1 = %;0 + #, 2
2
At the rearward pressure tap%;2 " %;0#? 202
= "0!3
or
%;2 = %;0 " 0!3#, 202
The pressure di!erence is
%;1 " %;2 = 1!3#, 202
The pressure gage records the di!erence in piezometric pressure so
,0 = (2
1!3#!%)1*2
= (2
1!3× 1000× 500)1*2
= 0!88 m/s
237
PROBLEM 4.54
Situation: The design of a spherical Pitot tube measuring the ow velocity. Velocityvaries as , = ,! sin K!
Find: (a) Angle K for pressure tap.(b) Equation for free-stream velocity.(c) E!ect of o!set angle `!
APPROACH
(a) Apply the Bernoulli equation between the free stream and the location of thepressure tap gives.(b) Apply the Bernoulli equation between the stagnation point, tap A, and pressuretap B.(c) Let the pressure tap on the axis of the probe be tap A and the other one tap B.
ANALYSIS
(a) Bernoulli equation
%! +1
2#, 2! = %+
1
21!52, 2! sin
2 K
But at the pressure tap location % = %! so
2!25 sin2 K = 1
Solving for K gives
K = 41!8!
(b) Bernoulli equation
%= = %> +1
21!52#, 2! sin
2 K = %> +1
21!52#, 2!
1
2!25or
,! =q
2(,#",$)L
(c) The pressure at tap A would be
%= = %! "1
2#, 2! 1!5
2 sin2 ` = %! " 1!125#, 2! sin2 `
The pressure at tap B would be
%> = %! " 1!125#, 2! sin2(` + 41!8!)
The pressure di!erence would be
%= " %> = 1!125#, 2!£sin2(` + 41!8!)" sin2 `
¤
238
Solving for the velocity gives
,! =
s%= " %>
1!125#£sin2(` + 41!8!)" sin2 `
¤
which will designated at the “true” velocity, ,- ! The “indicated” velocity, ,P ' is theone calculated assuming that tap A is at the stagnation point. The ratio of theindicated velocity to the true velocity would be
,P,-=q2!25
£sin2(` + 41!8!)" sin2 `
¤
The error is
error =,- " ,P,-
= 1",P,-
Angle &, degrees
0 2 4 6 8 10 12
0
2
4
6
8
10
12
14
16
Erro
r, %
239
PROBLEM 4.55
Situation: A Pitot tube measuring the ow velocity in water is described in theproblem statement.
Find: Explain how to design the Pitot tube.
ANALYSIS
Three pressure taps could be located on a sphere at an equal distance from thenominal stagnation point. The taps would be at intervals of 120!! Then when theprobe is mounted in the stream, its orientation could be changed in such a way as tomake the pressure the same at the three taps. Then the axis of the probe would bealigned with the freestream velocity.
240
PROBLEM 4.56
Situation: Two Pitot tubes are connected to air-water manometers to measure airand water velocities.
Find: The relationship between ,= and ,M .
, =p2)!M =
p2!%;$#
ANALYSIS
The !%; is the same for both; however,
#% FF #'
Therefore ,= F ,M . The correct choice is b).
241
PROBLEM 4.57
Situation: A Pitot tube measures the velocity of kerosene at center of 12 inch pipe.Deection of mercury–kerosene manometer is 5 inches.
Find: Velocity.Properties From table A.4 #ker = 1!58 slugs/ft
3!(ker = 51 lbf/ft3
APPROACH
Apply the Pitot tube equation and the hydrostatic equation.
ANALYSIS
Hydrostatic equation
!%; = !M((HG " (ker)= (5$12)(847" 51)= 332 psf
Pitot tube equation
, = (2!%;$#)1*2
= (2× 332$1!58)1*2
, = 20!5 fps
242
PROBLEM 4.58
Situation: A Pitot tube for measuring velocity of air at 20oC at std. atm. pressure.Di!erential pressure gage reads 3 kPa.
Find: Air velocity.Properties From table A.3 #(20oC)= 1!2 kg/m3
APPROACH
Apply the Pitot tube equation.
ANALYSIS
Pitot tube equation
, = (2!%;$#)1*2
= (2× 3' 000$1!2)1*2
, = 70!7 m/s
243
PROBLEM 4.59
Situation: A Pitot tube is used to measure the velocity of air at 60oF and std. atm.pressure. A pressure di!erence of 11 psf is measured.
Find: Air velocity.Properties From table A.3 #a(60
oF)= 0!00237 slugs/ft3
APPROACH
Apply the Pitot tube equation.
ANALYSIS
Pitot tube equation
, =p2!%;$#
, = (2× 11$0!00237)1*2
, = 96!3 fps
244
PROBLEM 4.60
Situation: A Pitot tube measures gas velocity in a duct. The gas density is 0.12lbm/ft3 and the piezometric pressure di!erene is 0.9 psi.
Find: Gas velocity in duct.
APPROACH
Apply the Pitot tube equation.
ANALYSIS
Pitot tube equation The density is 0.12 lbm/ft3$32!2 = 0!00373 slugs/ft3
, =p2!%;$#
= [2× 0!9× 144$0!00373]1*2
, = 264 ft/s
245
PROBLEM 4.61
Situation: A sphere moving horizontally through still water at 11 ft/s. Velocity atpoint I induced by moving sphere is 1 ft/s with respect to earth.
Find: Pressure ratio: %=$%0
APPROACH
Apply the Bernoulli equation.
ANALYSIS
A
1 ft/s
By referencing velocities to the spheres a steady ow case will be developed. Thus,for the steady ow case ,0 = 11 ft/s and ,= = 10 ft/s. Then when Bernoulli’sequation is applied between points 0 and I it will be found that %=$%0 F 1 (case c)
246
PROBLEM 4.62
Situation: A body moving horizontally through still water at 13 m/s. Velocity atpoints D and - induced by body are 5 m/s and 3 m/s.
Find: Pressure di!erence: %> " %)
ANALYSIS
Bernoulli equation Refer all velocities with respect to the sphere. Flow is then steadyand the Bernoulli equation is applicable.
%> " %) = (1' 000$2)[(13" 3)2 " (13" 5)2]= 18' 000 Pa
%> " %) = 18 kPa
247
PROBLEM 4.63
Situation: Water in a ume is described in the problem statement.
Find: If gage A will read greater or less than gage B.
ANALYSIS
Both gage A and B will read the same, due to hydrostatic pressure distribution inthe vertical in both cases. There is no acceleration in the vertical direction.
248
PROBLEM 4.64
Situation: An apparatus is used to measure the air velocity in a duct. It is connectedto a slant tube manometer with a 30o leg with the indicated deection. The air inthe duct is 20oC with a pressure of 150 kPa, abs. The manometer uid has a specicgravity of 0.7.
Find: Air velocity
APPROACH
Apply the Bernoulli equation.
ANALYSIS
The side tube samples the static pressure for the undisturbed ow and the centraltube senses the stagnation pressure.Bernoulli equation
%0 + #,20 $2 = %stagn. + 0
or ,0 =q(2$#)(%stagn. " %0)
But
%stagn. " %0 = (0!067" 0!023) sin 30! × 0!7× 9' 810 = 151!1 Pa# = %$"& = 150' 000$(287× (273 + 20)) = 1!784 kg/m3
Then
,0 =p(2$1!784)(151!1)
V0=13.02 m/s
249
PROBLEM 4.65
Situation: A spherical probe with pressure coe"cients given is used to nd gas ve-locity. The pressure di!erence is 4 kPa and the gas density is 1.5 kg/m3.
Find: Gas velocity.
APPROACH
Apply the denition of pressure coe"cient.
ANALYSIS
Pressure coe"cient
!-, = 1" ("0!4)!-, = 1!4 = (%= " %>)$(#, 20 $2), 20 = 2(4' 000)$(1!5× 1!4)
,0 = 61!7 m/s
250
PROBLEM 4.66
Situation: An instrument used to nd gas velocity in smoke stacks. Pressure coe"-cients are given. Connected to water manometer with 0.8 cm deection. The gas isat 101 kPa, abs and the temperature is 250oC. The gas constant is 200 J/kgK.
Find: Velocity of stack gases.
ANALYSIS
Ideal gas law
# = %$"&
= 101' 000$(200× (250 + 273))= 0!966 kg/m2
Manometer equation!%; = ((% " (')!M
but (% À (' so
!%; = (%!M
= 9790× 0!008= 78!32 Pa
(%= " %>); = (-,= " -,>)#, 20 $2(%= " %>); = 1!3#, 20 $2
, 20 = 2× 78!32$(1!3× 0!966)
,0 = 11!17 m/s
251
PROBLEM 4.67
Situation: A spherical probe is used to measure water velocity. Pressure taps locatedat stagnation point and max width. A deection of 5 cm measured on mercurymanometer. Velocity at maximum width is 1.5 times the free stream velocity.
Find: Free-stream velocity.
APPROACH
Apply the Bernoulli equation between points 1 and 2. Let point 1 be at the stagnationpoint and point 2 be at the 90! position. At the 90! position \ = 1!5\ sin# = 1!5\ .
ANALYSIS
Bernoulli equation
%;1 +
=0z }| {#, 21 $2 = %;2 + #,
22 $2
%;1 " %;2 = #, 22 $2
((6D " (62B)!M = (#$2)(1!5\)2
(((6D$(62B)" 1)!M = (1$2))(1!5\)2
(13!6" 1)× 0!05 = (1$2))(2!25)\2
\ = 2!34 m/s
252
PROBLEM 4.68
Situation: The wake of a sphere which separates at 120o! The free stream velocity ofair (# = 1!2 kg/m3) is 100 m/s.
Find: (a) Gage pressure.(b) Pressure coe"cient.
APPROACH
Apply the Bernoulli equation from the free stream to the point of separation and thepressure coe"cient equation.
ANALYSIS
Pressure coe"cient-, = (%" %0)$(#, 2$2)
Bernoulli equation
%0 + #\2$2 = %+ #@2$2
%" %0 = (#$2)(\2 " @2)
or(%" %0)$(#\2$2) = (1" (@$\)2)
but
@ = 1!5\ sin K
@ = 1!5\ sin 120!
@ = 1!5\ × 0!866
At the separation point
(@$\) = 1!299
(@$\)2 = 1!687
-, = 1" 1!687
-, = "0!687
%gage = -,(#$2)\2
= ("0!687)(1!2$2)(1002)= "4' 122 Pa
%gage = "4!122 kPa gage
253
PROBLEM 4.69
Situation: A pressure transducer is connected between taps of spherical Pitot tubeand reads 120 Pa. Air density is 1.2 kg/m3!
Find: Free-stream velocity.
APPROACH
Apply the Bernoulli equation between the stagnation point (forward tap) and theside tap where @ = 1!5\! Neglect elevation di!erence.
ANALYSIS
@ = 1!5\ sin K
@O=90! = 1!5\(1)
= 1!5\
Bernoulli equation
%1 + #,21 $2 = %2 + #,
22 $2
%1 " %2 = (#$2)(, 22 " ,21 )
%1 " %2 = (1!2$2)((1!5\)2 " 0)120 = 1!35\2
\ = 9!43 m/s
254
PROBLEM 4.70
Situation: A Pitot tube used to measure the airspeed of an airplane. Calibrated toprovide correct airspeed with & = 17oC and p=101 kPa, abs. Pitot tube indicates 60m/s when pressure is 70 kPa, abs and temperature is -6.3oC.
Find: True airspeed.
APPROACH
Apply the Pitot tube equation.
ANALYSIS
Pitot tube equation
, = <p2!%;$#
then
,calibr. = (<$p#calibr.)
p2!%;
,true = (<$p#true)
p2!%; (1)
,indic. = (<$p#calib.)
p2!%; (2)
Divide Eq. (1) by Eq. (2):
,true$,indic. =p#calib.$#true
=
s%calib%true
&true&calib
= [(101$70)× (273" 6!3)$(273 + 17)]1*2
= 1!15
,true = 60× 1!15,true = 69 m/s
255
PROBLEM 4.71
Situation: Two pressure taps are located at ±30o from the horizontal plane on acylinder and connected to a water manometer. Air with a density of 1.2 kg/m3
moving at 50 m/s approaches the cylinder at 20o from the horizontal plane.
Find: Deection of water manometer.
APPROACH
Evaluate the pressure coe"cient at the two taps locations to nd pressure di!erence.
ANALYSIS
One pressure tap is located 10o from the stagnation point and the other at 50o.Thepressure coe"cients at the two locations are
-, = 1" 4 sin2 K-,I50 = 1" 4 sin2 50!
= 1" 4(0!766)2 = "1!347-,I10 = 1" 4(0!174)2 = +0!879
Pressure coe"cient di!erence,
-,I10 " -,I50 = 0!879" ("1!347) = 2!226
Equating the pressure di!erence to the manometer deection
!% = !-,#air,20 $2
= 2!226× 1!2× 502$2= 3340 Pa
!M = !%$(H2O= 3340$9810
= 0!340 m
!M = 34!0 cm
256
PROBLEM 4.72
Situation: Check equations for pitot tube velocity measurement provided by instru-ment company.
Find: Validity of pitot tube equations provided.
APPROACH
Apply the Bernoulli equation
ANALYSIS
Applying the Bernoulli equation to the Pitot tube, the velocity is related to the changein piezometric pressure by
!%; = #, 2
2
where !%; is in psf, # is in slugs/ft3 and , is in ft/s. The piezometric pressuredi!erence is related to the "velocity pressure" by
!%;(lbf/ft2) = (%(lbf/ft
3)M@(in)$12(in/ft)
= 62!4× M@$12= 5!2M@
The density in slugs/ft3 is given by
#(slug/ft3) = A (lbm/ft3)$)1(lbm/slug)
= A$32!2
= 0!03106A
The velocity in ft/min is obtained by multiplying the velocity in ft/s by 60. Thus
, = 60
r2× 5!2M@0!03106A
= 1098
rM@A
This di!ers by less than 0.1% from the manufacturer’s recommendations. This couldbe due to the value used for )1 but the di!erence is probably not signicant comparedto accuracy of "velocity pressure" measurement.From the ideal gas law, the density is given by
# =%
"&
where # is in slugs/ft3' % in psfa and & in oR. The gas constant for air is 1716 ft-lbf/slug-oR. The pressure in psfg is given by
% (psfg) = *'(in-Hg)× 13!6× 62!4 (lbf/ft3)$12(in/ft)= 70!72*'
257
where 13.6 is the specic gravity of mercury. The density in lbm/ft3 is
A = )1#
= 32!2×70!72*'1716× &
= 1!327*'&
which is within 0.2% of the manufacturer’s recommendation.
258
PROBLEM 4.73
Situation: The ow of water over di!erent surfaces is described in the problem state-ment.
Find: Relationship of pressures.
ANALYSIS
The ow curvature requires that %> F %9 + (A where A is the liquid depth. Also,because of hydrostatics %) = %9 + (A! Therefore %> F %) . Also %= G %9 + (A so%= G %) ! So %> F %) F %=.The valid statement is (b).
259
PROBLEM 4.74
Situation: The velocity vector V = 10Ei" 10?j describes a ow eld.
Find: Is the ow irrotational?
ANALYSIS
In a two dimensional ow in the E" ? plane, the ow is irrotational if (Eq. 4.34a)
[;
[E=[@
[?
The velocity components and derivatives are
@ = 10E[@
[?= 0
; = "10?[;
[E= 0
Therefore the ow is irrotational.
260
PROBLEM 4.75
Situation: A velocity eld is described by @ = "J? ; = JE
Find: Vorticity and Rate of rotation
ANALYSIS
Rate of rotation
J; = (1$2)([;$[E" [@$[?)= (1$2)(J " ("J))= (1$2)(2J)
J; = J
Vorticity is twice the average rate of rotation; therefore, the vorticity = 2J
261
PROBLEM 4.76
Situation: A two-dimensional velocity eld is given by
@ =-(?2 " E2)(E2 + ?2)2
, ; ="-E?
(E2 + ?2)2
Find: Check if ow is irrotational.
ANALYSIS
Apply equations for ow rotation in E" ? plane.
[;$[E" [@$[? = (2-?$(?2 + E2)2)" (2-(?2 " E2)2?$(?2 + E2)3)+(2-?$(?2 + E2)2)" (4-E?(2E)$(?2 + E2)3)
= 0 The ow is irrotational
262
PROBLEM 4.77
Situation: A velocity eld is dened by @ = EP+ 2?' ; = EP2 " ?P.
Find: (a) Acceleration at E = ? = 1 m and P = 1 s.(b) Is the ow rotational or irrotational?
ANALYSIS
Irrotational ow:[@$[? = 2; [;$[E = P2 [@$[? 6= [;$[E
Therefore, the ow is rotational.Determine acceleration:
C$ = @[@$[E+ ;[@$[? + [@$[P
C$ = (EP+ 2?)P+ 2(EP2 " ?P) + EC3 = @[;$[E+ ;[;$[? + [;$[P
= (EP+ 2?)P2 + (EP2 " ?P)("P) + (2EP" ?)a = ((EP+ 2?)P+ 2P(EP" ?) + E)i+ (P2(EP+ 2?)" P2(EP" ?) + (2EP" ?)) j
Then for E =l m, ? =l m, and P =l s the acceleration is:
a = ((1 + 2) + 0 + 1) i+ ((1 + 2) + 0 + (2" 1)) j m/s
a = 4 i+ 4 j m/s2
263
PROBLEM 4.78
Situation: Fluid ows between two stationary plates.
Find: Find rotation of uid element when it moves 1 cm downstream
APPROACH
Apply equations for rotation rate of uid element..
ANALYSIS
The rate of rotation for this planar (two-dimensional) ow is
J; =1
2([;
[E"[@
[?)
In this problem, ; = 0 so
J; = "1
2
[@
[?= 8?
The time to travel 1 cm is
!P =1
@
=1
2(1" 4?2)
The amount of rotation in 1 cm travel is
!K = J;!P
!K =4?
(1" 4?2)
Animation An animation of the solution can be found athttp://www.justask4u.com/csp/crowe.
264
PROBLEM 4.79
Situation: A velocity distribution is provided for a combination of free and forcedvortex.
;O =1
3
£1" exp("32)
¤
Find: Find how much a uid element rotates in one circuit around the vortex as afunction of radius.
ANALYSIS
The rate of rotation is given by
J; =1
3
A
A3(;O3)
J; =1
3
A
A3[1" exp("32)]
= exp("32)
The time to complete one circuit is
!P =203
;O
=2032
[1" exp("32)]
So, the total rotation in one circuit is given by
!K = J;!P
!K
20(rad) = 32
exp("32)1" exp("32)
A plot of the rotation in one circuit is shown. Note that the rotation is 20 for r$ 0(rigid body rotation) and approaches zero (irrotational) as 3 becomes larger.
265
Animation An animation of the solution can be found athttp://www.justask4u.com/csp/crowe.
266
PROBLEM 4.80
Situation: Closed tank 4 feet in diameter with piezometer attached is rotated at 15rad/s about a vertical axis.
Find: Pressure at bottom center of tank.
APPROACH
Apply the equation for pressure variation equation- rotating ow.
ANALYSIS
Pressure variation equation- rotating ow
%+ (R " #32J2$2 = %, + (R, " #32,J2$2
where %, = 0' r, = 3 ft and 3 = 0' then
% = "(#$2)(9× 225) + ((R, " R)= (1!94$2)(2025) + 62!4× 2!5= "1808 psfg = "12!56 psig
% = "12!6 psig
267
PROBLEM 4.81
Situation: A tank 1 foot in diameter and 1 foot high with liquid (S=0.8) is rotatedon 2 foot arm. The speed is 20 ft/s and pressure at point A is 25 psf.
Find: Pressure at B.
APPROACH
Apply the pressure variation equation- rotating ow from point I to point D!
ANALYSIS
Pressure variation equation- rotating ow
%= + (R= " #32=J2$2 = %> + (R> " #32>J
2$2
%> = %= + (#$2)(J2)(32> " 3
2=) + ((R= " R>)
where J = ,=$3= = 20$1!5 = 13!333 rad/s and # = 0!8× 1!94 slugs/ft3! Then
%> = 25 + (1!94× 0!80$2)(13!332)(2!52 " 1!52) + 62!4× 0!8("1)= 25 + 551!5" 49!9
%> = 526!6 psf
268
PROBLEM 4.82
Situation: A closed tank with liquid (S=1.2) is rotated about vertical axis at 10 rad/sand upward at 4 m/s2.
Find: Di!erence in pressure between points I and D: %> " %=
APPROACH
Apply the pressure variation equation for rotating ow between points D & -. Letpoint - be at the center bottom of the tank.
ANALYSIS
Pressure variation equation- rotating ow
%> " #32>J2$2 = %) " #32)J
2$2
where 3> = 0!5 m, 3) = 0 and J = 10 rad/s. Then
%> " %) = (#$2)(J2)(0!52)
= (1200$2)(100)(0!25)
= 15' 000 Pa
%) " %= = 2( + #C;L
= 2× 11' 772 + 1' 200× 4× 2= 33' 144 Pa
Then
%> " %= = %> " %) + (%) " %=)= 15' 000 + 33' 144
= 48' 144Pa
%> " %= = 48!14 kPa
269
PROBLEM 4.83
Situation: A U-tube rotating about one leg. Before rotation, the level of liquid ineach leg is 0.25 m. The length of base and length of leg is 0.5 m.
Find: Maximum rotational speed so that no liquid escapes from the leg.
APPROACH
Apply the pressure variation equation for rotating ow. Let point 1 be at top ofoutside leg and point 2 be at surface of liquid of inside leg.
ANALYSIS
At the condition of imminent spilling, the liquid will be to the top of the outside legand the leg on the axis of rotation will have the liquid surface at the bottom of itsleg.Pressure variation equation- rotating ow
%1 + (R1 " #321J2$2 = %2 + (R2 " #322J
2$2
where %1 = %2' R1 = !5 m and R2 = 0
( × 0!5" (($))× !52J2$2 = 0J2 = 4)
= 2&)
J = 6!26 rad/s
270
PROBLEM 4.84
Situation: A U-tube rotating about one leg at 60 rev/min. Liquid at bottom of U-tube has specic gravity of 3.0. There is a 6 inch height of uid in outer leg. Distancebetween legs is 1 ft.
Find: Specic gravity of other uid.
APPROACH
Apply the pressure variation equation for rotating ow between points 1 & 2.
ANALYSIS
Pressure variation equation- rotating ow
3
2 1
S=3.0
%2 + (R2 " #322J2$2 = %1 + (R1 " #321J
2$2
where R2 = R1' 31 = 0' 32 = 1 ft. and J = (60$60)× 20 = 20 rad/s. Then
%2 = (1!94× 3)(12)(20)2$2 = 114!9 psfg (1)
Also, by hydrostatics, because there is no acceleration in the vertical direction
%2 = 0 +1
2× (( (2)
where (( is the specic weight of the other uid. Solve for (( between Eqs. (1) &(2)
(( = 229!8 lbf/ft3
6 = (($(H2O= 229!8$62!4
6 = 3!68
271
PROBLEM 4.85
Situation: A U-tube rotating about one leg at 32.12 rad/s. Geometry given in problemstatement.
Find: New position of water surface in outside leg.
APPROACH
Apply the pressure variation equation for rotating ow between the water surface inthe horizontal part of the tube and the water surface in the vertical part of the tube.
ANALYSIS
A preliminary check shows that the water will evacuate the axis leg. Thus uidconguration is shown by the gure.
d
0.40+d
Pressure variation equation- rotating ow
%1 + (R1 " #321J2$2 = %2 + (R2 " #322J
2$2
where 31 = A' 32 = 0!30 m and (R2 " R1) = 0!50 + A. Then
(#J2$2)(322 " 321) = ((0!50 + A)
(1' 000× 32!122$2)(0!32 " A2) = (0!50 + A)9' 810
Solving for A yields A = 0!274 mThen
R2 = 0!50 + 0!274
z=0.774 m
272
PROBLEM 4.86
Situation: A U-tube is attached to rotating platform and platform rotating at 4 rad/s.
Find: Elevation of liquid in smaller leg of U-tube.
APPROACH
Apply the pressure variation equation for rotating ow between the liquid surface inthe large tube and the liquid surface in the small tube for conditions after rotationoccurs.
ANALYSIS
1 2
Pressure variation equation- rotating owLet 1 designate large tube and 2 the small tube.
(R1 " (#$2)321J2 = (R2 " (#$2)322J
2
R1 " R2 = (#$2()(J2)(321 " 322)
= ((($))$(2())J2(321 " 322)
= (J2$(2)))(0!42 " 0!22)= (42$(2)))(0!12)
= 0!0978 m = 9!79 cm
Because of the di!erent tube sizes a given increase in elevation in tube (1) will beaccompanied by a fourfold decrease in elevation in tube (2). Then R1 " R2 = 5!Rwhere !R = increase in elevation in (1)
!R1 = 9!79 cm/ 5=1.96 cm or R1 = 21!96 cm
Decrease in elevation of liquid in small tube
!R2 = 4!R1 = 7!83
R2 = 20 cm" 7!83 cmz2=12.17 cm
273
PROBLEM 4.87
Situation: A manometer with mercury (S=13.6) at the base is rotated about one leg.Water with height of 10 cm in central leg at is described in the problem statement.The length of the base is one meter. Height of mercury in outer leg is 1 cm.
Find: Rotational speed.
APPROACH
Apply the pressure variation equation for rotating ow between pts. (1) & (2).
ANALYSIS
(2)(1)
10 cm
However %1 = (0!10 m)((H2O) because of hydrostatic pressure distribution in thevertical direction (no acceleration).Pressure variation equation- rotating ow
%1 + (R1 " #321J2$2 = %2 + (R2 " #322J
2$2
where %2 = 0' R2 " R1 = 0!01 m, 31 = 0 and 32 = 1 m. Then
0!1(H2O + 0 + 0 = 0 + (Hg × 0!01" ((Hg$))× 12J2$2
J2 = ((2))(0!01(Hg " 0!1(H2O))$(HgJ = (2× 9!81)(!01" (0!1$13!6))
J = 0!228 rad/s
274
PROBLEM 4.88
Situation: A manometer is rotated about one leg. There is a 25 cm height di!erencein liquid (S=0.8) between the legs. The length of the base is 10 cm.
Find: Acceleration in )’s in leg with greatest amount of oil..
APPROACH
Apply the pressure variation equation for rotating ow between the liquid surfaces of1 & 2Let leg 1 be the leg on the axis of rotation. Let leg 2 be the other leg of themanometer.
ANALYSIS
Pressure variation equation- rotating ow
%1 + (R1 " #321J2$2 = %2 + (R2 " #322J
2$2
0 + (R1 " 0 = (R2 " (($))322J2$2
J2322$(2g) = R2 " R1C: = 3J2
= (R2 " R1)(2g)$3= (0!25)(2g)$32= (0!25)(2g)$0!1
C: = 5)
275
PROBLEM 4.89
Situation: A fuel tank rotated at 3 rev/min in zero-gravity environment. End oftank 1.5 m from axis of rotation and fuel level is 1 m from rotation axis. Pressure innon-liquid region is 0.1 kPa and density of fuel is 800 kg/m3!
Find: Pressure at exit (point I).
APPROACH
Apply the pressure variation equation for rotating ow from liquid surface to pointA. Call the liquid surface point 1.
ANALYSIS
Pressure variation equation- rotating ow
%1 + (R1 " #321J$2 = %= + (R= " #32=J
2$2
%= = %1 + (#J2$2)(32= " 3
21) + ((R1 " R=)
However ((R1 + R=) = 0 in zero-) environment. Thus
%= = %1 + ((800 kg/m3)$2)(60$60 rad/s)2(1!52 " 12)
= 100 Pa+ 49!3 Pa
%= = 149!3 Pa
276
PROBLEM 4.90
Situation: A rotating set of tubes is described in the problem statement.
Find: Derive a formula for the angular speed when the water will begin to spill.
APPROACH
Start with pressure variation equation for rotating ow. Let point 1 be at the liquidsurface in the large tube and point 2 be at the liquid surface in the small tube.
ANALYSIS
Pressure variation equation- rotating ow
%1 + (R1 " %321J2$2 = %2 + (R2 " #322J$2
!
1
2
3.75
The change in volume in leg 1 has to be the same as leg 2. So
!M1A21 = !M2A
22
!M1 = !M2
µA22A21
¶
=!M24
The elevation di!erence between 1 and 2 will be
R2 " R1 = 3L+3L
4= 3!75L
Then %1 = %2 = 0 gage, 32 = L' and R2 " R1 = 3!75L so
#322J2$2 = ((3!75L)
(($(2)))(L2)J2 = 3!75(L
J2 =7!5)
L
J =p7!5)$L
277
PROBLEM 4.91
Situation: Mercury is rotating in U-tube at J and mercury levels shown in diagram.
Find: Level of mercury in larger leg after rotation stops.
APPROACH
Apply the pressure variation equation for rotating ow from the liquid surface in thesmall tube (S) to the liquid surface in the large tube (L).
ANALYSIS
Pressure variation equation- rotating ow
%. + (C. " #32.J2$2 = %E + (RE " #32EJ
2$2
But %. = %E' 3. = 0!5L and 3E = 1!5L. Then
(#$2)J2(32E " 32.) = ((RE " R.)
(($2))J2(1!52L2 " 0!52L2) = ((2L)
J2 = 2)$L
J =p2)$(5$12)
J = 12!43 rad/s
Change in volume of Hg in small tube is same as in large tube. That is
(& = (E!R&0A
2$4 = !RE0(2A)2$4
!R& = 4!RE
Also
!R& +!RE = 2L
4!RE +!RE = 2× (5$12) ft = 0!833 ft!RE = 0!833 ft$5 = 0!167 ft
Mercury level in large tube will drop 0.167 ft from it original level.
278
PROBLEM 4.92
Situation: Water in a 1 cm diameter tube, 40 cm long. Closed at one end and rotatedat 60.8 rad/s.
Find: Force exerted on closed end.
APPROACH
Apply the pressure variation equation for rotating ow from the open end of the tubeto the closed end.
ANALYSIS
Pressure variation equation- rotating ow
%1 = (R1 " #321J2$2 = %2 + (R2 " #322J
2$2
where R1 = R2. Also let point 2 be at the closed end; therefore 31 = 0 and 32 = 0!40m.
%2 = (#$2)(0!402)(60!8)2
= 500× 0!16× 3697= 295!73 kPa
Then
H = %2I = 295' 730× (0$4)(!01)2
H = 23!2 N
279
PROBLEM 4.93
Situation: Mercury in rotating manometer with dimensions shown on gure.
Find: Rate of rotation in terms of ) and L.
APPROACH
Apply the pressure variation equation for rotating ow from the mercury surface inthe left tube to the mercury surface in the right tube. Then %< = %K.
ANALYSIS
Pressure variation equation- rotating ow
(R< " #32<J2$2 = (RK " #32KJ
2$2
J2(($2))(32K " 32< ) = ((RK " R<)J2 = 2)(RK " R<)$(32K " 3
2< )
= 2)(L)$(9L2 " L2)
J =p)$(4L)
280
PROBLEM 4.94
Situation: A U-tube rotated around left leg. Rotated at 5 rad/s and then 15 rad/s.Dimensions given on problem gure.
Find: (a) water level in tube at 5 rad/s.(b) water level for 15 rad/s.
APPROACH
Apply the pressure variation equation for rotating ow between the water surfaceand the left leg and the water surface in the right leg. At these surfaces %< = %K = 0gage.
ANALYSIS
Pressure variation equation- rotating ow(a) Assume that there is uid in each leg of the manometer.
(R2 " #322 J2$2 = (RK " #32KJ
2$2
R2 " RK = "32KJ2$2) = "J2L2$2)
where the subscript _ refers to the left leg and 3 to the right leg. Because the manome-ter rotates about the left leg 32 = 0!Then
R2 " RK = "52 × 0!252
2× 9!81= 0!080 m = 8 cm (1)
Also
R2 + RK = 1!4L
= 35 cm (2)
Solving Eqs. (1) and (2) for R2 and RK yields
z<=13.5 cm and zK=21.5 cm
(b) Assume as before that the liquid exists in both vertical legs. Then
R2 " RK = "J2L2$2)
= "152 × 0!32
2× 9!81= 1!032 m = 103!2 cm (3)
Solving Eqs. 2 and 3 for R2 and RK yields R2 = 69!1 cm and RK = "34!1 cm which is animpossible answer. The uid then must not totally ll the lower leg and must looklike
281
!
1
1.4 +d
Let subscript 1 refer to location of liquid in lower leg as shown. Applying equationfor pressure variation equation- rotating ow gives
(R1 " #321J2$2 = (RK " #32KJ
2$2
where R1 = 0 and 3K = L so
"321J2$2) = RK " L2J2$2)RK = J2$2)(L2 " 321)
The total length of liquid in the legs has to be the same before rotation as after so
L" 31 + RK = 2× 0!7L+ LRK = 1!4L+ 31
One can now write1!4L+ 31 = J
2$2)(L2 " 321)
or
1!4 +31L
=LJ2
2)
·1"
³31L
´2¸
=0!3× 152
2× 9!81
·1"
³31L
´2¸
= 1!032
·1"
³31L
´2¸
Solving the quadratic equation for 31$L gives
31L= 0!638
With L = 30 cm,r1=19.15 cm and zK=61.15 cm
282
PROBLEM 4.95
Situation: U-tube rotated about vertical axis at 8 rad/s and then at 20 rad/s.
Find: Pressures at points I and D!
Assumptions: %? = 0
APPROACH
Apply the pressure variation equation for rotating ow.
ANALYSIS
Pressure variation equation- rotating ow Writing out the equation
%= + (R= " #32=J2$2 = %F + (RF " #32FJ
2$2
where %F = 0 gage, 3= = 0' 3F = 0!64 m and RF " R= = 0!32 m The density is 2000kg/m3 and the specic weight is 2× 9810 = 19620 N/m3! For a rotational speed of 8rad/s
%= = ((RF " R=)" #32FJ2$2
%= = 0!32× 19620" 2000× 0!642 × 82$2= "19' 936 Pa
%= = "19!94 kPa
%> = ((RF " R=)= 0!32× 19620
%> = 6!278 kPa
Now for J = 20 rad/s solve for %= as above.
%= = 19620× 0!32" 2000× 0!642 × 202$2= "157' 560 Pa;
which is not possible because the liquid will vaporize. Therefore the uid musthave the conguration shown in the diagram with a vapor bubble at the center.
0.32 m+r
vapor
r
283
Assume %K = 0!Therefore, %= = %? = "101 kPa abs . Now the equation for rotatingows becomes
%K " #32J2$2 = %> " #× 3F2J2$2
where %K = %? = "101 kPa, The height of the liquid in the right leg is now0!32 + 3! Then
"101' 000" 2000× 20232$2 = 19620× (0!32 + 3)" 2000× 0!642 × 202$2"101' 000" 400' 00032 = 6278 + 196203 " 163' 84032 + 0!049053 " 0!1414 = 0
Solving for 3 yields 3 = 0!352 m. Therefore
%> = (0!32 + 0!352)× 19620= 13' 184Pa
%> = 13!18 kPa
284
PROBLEM 4.96
Situation: Water in U-tube rotated around one leg and end of leg is closed with aircolumn.
Find: Rotational speed when water will begin to spill from open tube.
APPROACH
Apply the pressure variation equation for rotating ow between water surface in legA-A to water surface in open leg after rotation.
ANALYSIS
When the water is on the verge of spilling from the open tube, the air volume in theclosed part of the tube will have doubled. Therefore, we can get the pressure in theair volume with this condition.
%#(# = %(((
and a and b refer to initial and nal conditions
%( = %#(#$(( = 101 kPa×1
2%( = 50!5 kPa, abs = "50!5 kPa, gage
Pressure variation equation- rotating ow
%= + (R= " #32=J2$2 = %open + (Ropen " #3openJ2$2
%= + 0" 0 = 0 + ( × 6L" #(6L)2J2$2"50!5× 103 = 9810× 6× 0!1" 1000× 0!62 × J2$2
"50!5× 103 = 5886" 180J2
Y2 = 313!3
J = 17!7 rad/s
285
PROBLEM 4.97
Situation: A centrifugal pump consisting of a 10 cm disk is rotated at 2500 rev/min.
Find: Maximum operational height: R
APPROACH
Apply the pressure variation equation for rotating ow from point 1 in vertical pipeat level of water to point 2 at the outer edge of the rotating disk.
ANALYSIS
Pressure variation equation- rotating owThe exit pressure of the pump is atmospheric.Let point 1 be the liquid surface where R = 0 and point 2 the pump outlet.
%1 + (R1 " #321J2$2 = %2 + (R2 " #322J
2$2
0 + 0" 0 = 0 + (R2 " #322J2$2
0 = R2 " 0!052J2$2)
The rotational rate is
J = (2' 500 rev/min)(1 min/60 s)(20 rad/rev)=261.8 rad/s
Therefore
R2 = ((0!05)(261!8))2$(2× 9!81)R2 = 8!73 m
286
PROBLEM 4.98
Situation: A tank rotated at 5 rad/s about horizontal axis and water in tank rotatesas a solid body.
Find: Pressure gradient at R = "1' 0'+1!
APPROACH
Apply the pressure variation equation for rotating ow.
ANALYSIS
Pressure variation equation- rotating ow
[%$[3 + (([R$[3) = "#3J2
[%$[R = "( " #3J2
when R = "1 m
[%$[R = "( " #J2
= "((1 + J2$))= "9' 810(1 + 25$9!81)
[%$[R = "34!8 kPa/m
when R = +1 m
[%$[R = "( + #J2
= "((1" J2$))= "9810× (1" 25$9!81)
[%$[R = 15!190 kPa/m
At R = 0
[%$[R = "(
[p/[z=-9.810 kPa/m
287
PROBLEM 4.99
Situation: A rotating tank is described in the problem 4.98.
Find: Derive an equation for the maximum pressure di!erence.
APPROACH
Apply the pressure variation equation for rotating ow.
ANALYSIS
Below the axis both gravity and acceleration cause pressure to increase with decreasein elevation; therefore, the maximum pressure will occur at the bottom of the cylin-der. Above the axis the pressure initially decreases with elevation (due to gravity);however, this is counteracted by acceleration due to rotation. Where these two ef-fects completely counter-balance each other is where the minimum pressure will occur([%$[R = 0)! Thus, above the axis:
[%$[R = 0 = "( + 3J2# minimum pressure condition
Solving: 3 = ($#J2; %min occurs at Rmin = +)$J2!Using the equation for pressurevariation in rotating ows between the tank bottom where the pressure is a maximum( Rmax = "30) and the point of minimum pressure.
%max + (Rmax " #320J2$2 = %min + (Rmin " #32minJ
2$2
%max " (30 " #320J2$2 = %min + ()$J
2 " #()$J2)2J2$2
%max " %min = !%max = (#J2$2)[320 " ()$J2)2] + ((30 + )$J
2)
Rewriting
!%max =LQ2K202+ (30 +
RD2Q2
288
PROBLEM 4.100
Situation: A tank 4 ft in diameter and 12 feet long rotated about horizontal axis andwater in tank rotates as a solid body. Maximum velocity is 20 ft/s.
Find: Maximum pressure di!erence in tank and point of minimum pressure.
APPROACH
Same solution procedure applies as in Prob. 4.99.
ANALYSIS
From the solution to Prob. 4.99 %minoccurs at R = ($#J2 where J = (20 ft/s)/2.0 ft= 10 rad/s. Then
Rmin = ($#J2
= )$J2
= 32!2$102
Rmin = 0!322 ft above axis
The maximum change in pressure is given from solution of Problem 4.99
!%max =#J23202
+ (30 +()
2J2
=1!94× 102 × 22
2+ 62!4× 2 +
62!4× 32!22× 102
= 388 + 124!8 + 10!0
!pmax=523 lbf/ft2
289
PROBLEM 4.101
Situation: Incompressible and inviscid liquid ows around a bend with inside radiuso1 1 m and outside radius of 3 m. Velocity varies as , = 1$3!
Find: Depth of liquid from inside to outside radius.
APPROACH
Apply the Bernoulli equation between the outside of the bend at the surface (point2) and the inside of the bend at the surface (point 1).
ANALYSIS
Bernoulli equation
(%2$() + ,22 $2) + R2 = (%1$() + ,
21 $2) + R1
0 + , 22 $2) + R2 = 0 + , 21 $2) + R1
R2 " R1 = , 21 $2) " ,22 $2)
where ,2 = (1$3) m/s; ,1 = (1$1) m/s. Then
R2 " R1 = (1$2))(12 " 0!332)R2 " R1 = 0!045 m
290
PROBLEM 4.102
Situation: The velocity at outlet pipe from a reservoir is 16 ft/s and reservoir heightis 15 ft.
Find: Pressure at point I!
APPROACH
Apply the Bernoulli equation.
ANALYSIS
Bernoulli equation Let point 1 be at surface in reservoir.
(%1$() + (,21 $2)) + R1 = (%=$() + (,
2=$2)) + R=
0 + 0 + 15 = %=$62!4 + 162$(2× 32!2) + 0
%= = (15" 3!98)× 62!4%= = 688 psfg
p==4.78 psig
291
PROBLEM 4.103
Situation: The velocity at outlet pipe from a reservoir is 6 m/s and reservoir heightis 15 m.
Find: Pressure at point I!
APPROACH
Apply the Bernoulli equation.
ANALYSIS
Bernoulli equation Let point 1 be at reservoir surface.
(%1$() + (,21 $2)) + R1 = (%=$() + (,
2=$2)) + R=
0 + 0 + 15 = %=$9810 + 62$(2× 9!81) + 0
%= = (15" 1!83)× 9810%= = 129' 200 Pa, gage
p==129.2 kPa, gage
292
PROBLEM 4.104
Situation: The ow past a cylinder in a 40 m/s wind. Highest velocity at the maxi-mum width of sphere is twice the free stream velocity.
Find: Pressure di!erence between highest and lowest pressure.
Assumptions: Hydrostatic e!ects are negligible and the wind has density of 1.2 kg/m3.
APPROACH
Apply the Bernoulli equation between points of highest and lowest pressure.
ANALYSIS
The maximum pressure will occur at the stagnation point where , = 0 and the pointof lowest pressure will be where the velocity is highest (,max = 80 m/s).Bernoulli equation
%7 + #,27 $2 = %< + #,
2< $2
%7 + 0 = %< + (#$2)(,2max)
%7 " %< = (1!2$2)(802)
= 3' 840 Pa
%7 " %< = 3!84 kPa
293
PROBLEM 4.105
Situation: Velocity and pressure given at two points in a duct and uid density is1000 kg/m3!
Find: Describe the ow.
APPROACH
Check to see if it is irrotational by seeing if it satises Bernoulli’s equation.
ANALYSIS
The ow is non-uniform.Bernoulli equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2
(10' 000$9' 810) + (1$(2× 9!81)) + 0 = (7' 000$9' 810) + 22(2× 9!81) + 01!070 6= 0!917
Flow is rotational. The correct choice is c.
294
PROBLEM 4.106
Situation: Water owing from a large orice in bottom of tank. Velocities and eleva-tions given in problem.
Find: %= " %>!
APPROACH
Apply the Bernoulli equation.
ANALYSIS
Bernoulli equation
%=(+ R= +
, 2=2)
=%>(+ R> +
, 2>2)
%= " %> = ([(, 2> " ,2=)$2) " R=]
= 62!4[(400" 64)$(2× 32!2)" 1]
%= " %> = 263!2 psf
295
PROBLEM 4.107
Situation: Ideal ow past an airfoil in a 80 m/s airstream. Velocities on airfoil are 85and 75 m/s and air density is 1.2 kg/m3.
Find: Pressure di!erence between bottom and top.Assumption: The pressure due to elevation di!erence between points is negligible.
ANALYSIS
The ow is ideal and irrotational so the Bernoulli equation applies between any twopoints in the ow eld
%1 + (R1 + #,21 $2 = %1 + (R1 + #,
21 $2
%2 " %1 = (#$2)(, 21 " ,22 )
%2 " %1 = (1!2$2)(852 " 752)= 960 Pa
%2 " %1 = 0!96 kPa
296
PROBLEM 4.108
Situation: Horizontal ow between two parallel plates and one is xed while othermoves.
Find: Is the Bernoulli equation valid to nd pressure di!erence between plates?
ANALYSIS
This is not correct because the ow between the two plates is rotational and theBernoulli equation cannot be applied across streamlines. There is no acceleration ofthe uid in the direction normal to the plates so the pressure change is given by thehydrostatic equation so
%1 " %2 = (M
297
PROBLEM 4.109
Situation: A cyclonic storm has a wind speed of 15 mph at 3 = 200 mi.
Find: Wind speed at 3 = 50 and 100 miles: ,50 & ,100!
ANALYSIS
, 3 = Const.
(15 mph) (200 mi.) = Const.
,100 = Const./100 mi.
= (15 mph)(200 mi./100 mi.)
,100 = 30 mph
,50 = (15 mph)(200/50)
,50 = 60 mph
298
PROBLEM 4.110
Situation: A tornado is modeled as a combined forced and free vortex and core has adiameter of 10 mi. At 50 mi. from center, velocity is 20 mph. The core diameter is10 miles. The wind velocity is , = 20 mph at a distance of 3 = 50 miles,
Find: (a) Wind velocity at edge of core: ,10(b) Centrifugal acceleration at edge of core: C1
ANALYSIS
The velocity variation in a free vortex is
, 3 = const
Thus,50(50) = ,10(10)
Therefore,10 = ,50
50
10= 5× 20 = 100 mph
Acceleration (Eulerian formulation)
, = 100× 5280$3600 = 147 ft/sC1 = , 2$3
= 1472$(10× 5280)
C1 = 0!409 ft/s2
299
PROBLEM 4.111
Situation: A whirlpool modeled as free and forced vortex. The maximum velocity is10 m/s at 10 m.
Find: Shape of the water surface.
APPROACH
Apply the Bernoulli equation to the free vortex region.
ANALYSIS
Bernoulli equation
R10 +, 2max2)
= R +, 2
2)= 0
The elevation at the juncture of the forced and free vortex and a point far from thevortex center where the velocity is zero is given by
R10 = ", 2max2)
In the forced vortex region, the equation relating elevation and speed is
R10 ", 2max2)
= R ", 2
2)
At the vortex center, , = 0' so
R0 = R10 ", 2max2)
= ", 2max2)
", 2max2)
= ", 2max)
R = "102
9!81= "10!2 m
In the forced vortex region
, =3
1010 m/s = 3
so the elevation is given by
R = "10!2 +32
2)
In the free vortex region
, = 1010
3
so the elevation is given by
300
R = R10 +, 2max2)
"100
2)
µ10
3
¶2="51032
Radius, m
0 10 20 30 40 50-12
-10
-8
-6
-4
-2
0
Ele
vatio
n, m
301
PROBLEM 4.112
Situation: Tornado modeled as combination of forced and free vortex with maximumvelocity of 350 km/hr at 50 m.
Find: Variation in pressure.
APPROACH
Apply the pressure variation equation-rotating ow to the vortex center and theBernoulli equation in the free vortex region.
ANALYSIS
From the pressure variation equation-rotating ow, the pressure reduction from at-mospheric pressure at the vortex center is
!% = "#, 2maxwhich gives
!% = "1!2× (350×1000
3600)2 = "11!3 kPa
or a pressure of %(0) = 100"11!3 = 88!7 kPa. In the forced vortex region the pressurevaries as
%(0) = %" #, 2
2
In this region, the uid rotates as a solid body so the velocity is
, =3
50,max = 1!943
The equation for pressure becomes
% = 88!7 + 2!2632$1000 for 3 ' 50 m
The factor of 1000 is to change the pressure to kPa. A the point of highest velocitythe pressure is 94.3 kPa.Bernoulli equation
%(50) +1
2#, 2max = %+
1
2#, 2
In the free vortex region so the equation for pressure becomes
% = %(50) +1
2#, 2max
·1" (
50
3)2¸
for 3 ) 50 m
% = 94!3 + 5!65×·1" (
50
3)2¸
302
Radius (m)
0 50 100 150 200 25088
90
92
94
96
98
100
102
Pre s
sure
(kPa
)
303
PROBLEM 4.113
Situation: A tornado is modeled as a forced and free vortex.
Find: Pressure coe"cient versus nondimensional radius.
APPROACH
Apply Eq. 4.48 for the vortex center and the Bernoulli equation in the free vortexregion.
ANALYSIS
From Eq. 4.48 in the text, the pressure at the center of a tornado would be "#, 2maxso the pressure coe"cient at the center would be
-, ="#, 2max12#, 2max
= "2
For the inner, forced-vortex region the pressure varies as
%(0) = %"1
2#, 2
so the pressure coe"cient can be written as
-, =%" %!12#, 2max
= "2 + (,
,max)2 for 3 ' 31
-, = "2 + (3
31)2
so the pressure coe"cient at the edge of the forced vortex is -1.Bernoulli equation
%(31) +1
2#, 2max = %+
1
2#, 2
Pressure coe"cient
-, =%" %!12#, 2max
=%(31)" %!12#, 2max
+ [1" (313)2] for 3 ) 31
-, = "1 + [1" (313)2] = "(
313)2
304
0 1 2 3 4 5
-2
-1
0
Pres
sure
coe
ffici
ent
Nondimensional radius (r/r )c
305
PROBLEM 4.114
Situation: A weather balloon in a tornado modeled as a forced-free vortex.
Find: Where the balloon will move.
ANALYSIS
The uid in a tornado moves in a circular path because the pressure gradient pro-vides the force for the centripetal acceleration. For a uid element of volume ( therelationship between the centripetal acceleration and the pressure gradient is
#, 2
3= (
A%
A3
The density of a weather balloon would be less than the local air so the pressuregradient would be higher than the centripetal acceleration so theballoon would move toward the vortex center.
306
PROBLEM 4.115
Situation: The pressure distribution in a tornado.
Find: If the Bernoulli equation overpredicts or underpredicts the pressure drop.
ANALYSIS
As the pressure decreases the density becomes less. This means that a smaller pressuregradient is needed to provide the centripetal force to maintain the circular motion.This means that the Bernoulli equation will overpredict the pressure drop.
307
PROBLEM 4.116
Situation: A two dimensional ow in the E " ? plane is described in the problemstatement.
ANALYSIS
a) Substituting the equation for the streamline into the Euler equation gives
@STS$AE+ @ST
S3A? = ") S7
S$AE
; S@S$AE+ ; S@
S3A? = ") S7
S3A?
or
SS$
³T2
2
´AE+ S
S3(T
2
2)A? = ") S7
S$AE
SS$
³@2
2
´AE+ S
S3(@
2
2)A? = ") S7
S3A?
Adding both equations
[
[E
µ@2 + ;2
2
¶AE+
[
[?
µ@2 + ;2
2
¶A? = ")(
[M
[EAE+
[M
[?A?)
or
A(@2 + ;2
2+ )M) = 0
b) Substituting the irrotationality condition into Euler’s equation gives
@STS$+ ; S@
S$= ") S7
S$
; S@S3+ @ST
S3A? = ") S7
S3
or
SS$(T
2+@2
2+ )M) = 0
SS3(T
2+@2
2+ )M) = 0
308
PROBLEM 4.117
Situation: Di!erent ow patterns are created by breathing in or out.
Find: Why it is easier to blow a candle out while exhaling rather than inhaling.
ANALYSIS
The main point to this question is that while inhaling, the air is drawn into yourmouth without any separation occurring in the ow that is approaching your mouth.Thus there is no concentrated ow; all air velocities in the vicinity of your face arerelatively low. However, when exhaling as the air passes by your lips separationoccurs thereby concentrating the ow of air which allows you to easily blow out acandle.
309
PROBLEM 4.118
Situation: High winds can lift roofs from buildings.
Find: Explain why winds lift roofs rather than force them downward.
ANALYSIS
If a building has a at roof as air ows over the top of the building separation willoccur at the sharp edge between the wall and roof. Therefore, most if not all ofthe roof will be in the separation zone. Because the zone of separation will have apressure much lower than the normal atmospheric pressure a net upward force willbe exerted on the roof thus tending to lift the roof.Even if the building has a peaked roof much of the roof will be in zones of separation.These zones of separation will occur downwind of the peak. Therefore, peaked roofbuildings will also tend to have their roofs uplifted in high winds.
310
PROBLEM 5.1
Situation: Water ows in a 25 cm diameter pipe. ] = 0!04 m3/s.
Find: Mean velocity: ,
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
, = ]$I
= 0!04$(0$4× 0!252)
, = 0!815 m/s
311
PROBLEM 5.2
Situation: Water ows in a 16 in pipe. , = 3 ft/s.
Find: Discharge in cfs and gpm.
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
] = , I
= (3 ft/s)(0$4× 1!3332)
] = 4!19 ft3/s
= (4!17 ft3/s)(449 gpm/ft3/s)
] = 1880 gpm
312
PROBLEM 5.3
Situation: Water ows in a 2 m diameter pipe. , = 4 m/s.
Find: Discharge in m3/s and cfs.
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
] = , I
= (4)(0$4× 22)
] = 12!6 m3/s
] = (12!6 m3/s)(1/0.02832)(ft3$s)/(m3$s)
] = 445 cfs
313
PROBLEM 5.4
Situation: An 8 cm. pipe carries air, , = 20 m/s, & = 20!C, % = 200 kPa-abs.
Find: Mass ow rate: /
ANALYSIS
Ideal gas law
# = %$"&
= 200' 000$(287× 293)# = 2!378 c)$/3
Flow rate equation
/ = #, I
= 2!378× 20× (0 × 0!082$4)
/ = 0!239 kg/s
314
PROBLEM 5.5
Situation: A 1 m pipe carries natural gas, , = 20 m/s, & = 15!C, % = 150 kPa-gage.
Find: Mass ow rate: /
APPROACH
Apply the ideal gas law and the ow rate equation.
ANALYSIS
Ideal gas law
# = %$"&
= (101 + 150)103$((518)× (273 + 15))= 1!682 kg/m3
Flow rate equation
/ = #, I
= 1!682× 20× 0 × 0!52
/ = 26!4 kg/s
315
PROBLEM 5.6
Situation: A pipe for an aircraft engine test has / = 200 kg/s and , = 240 m/s.% = 50 kPa-abs, & = "18 !C.
Find: Pipe diameter: 1
APPROACH
Apply the ideal gas law and the ow rate equation.
ANALYSIS
Ideal gas law
# = %$"&
= (50× 103)$((287)(273" 18))= 0!683 kg/m3
Flow rate equation/ = #I,
So
I = /$(#, )
= (200)$((0!683)(240))
= 1!22 m2
I = (0$4)12 = 1!22
1 = ((4)(1!22)$0)1*2
1 = 1!25 m
316
PROBLEM 5.7
Situation: Air ows in a rectangular air duct with dimensions 1!0×0!2 m. ] = 1100m3/hr.
Find: Air velocity: ,
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
, = ]$I
= 1' 100 (m3$hr)$3600 (sec/hr)$(1× 0!20) m2
, = 1!53 m$ s
317
PROBLEM 5.8
Situation: In a circular duct the velocity prole is ;(3) = ,! (1" 3$") ' where ,! isvelocity at 3 = 0!
Find: Ratio of mean velocity to center line velocity: , $,!
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
] =
Z;AI
where AI = 203A3! Then
] =
Z F
0
,0(1" (3$"))203A3
= ,0(20)((32$2)" (33$(3"))) |F0
= 20,0(("2$2)" ("2$3))
= (2$6)0,0"2
Average Velocity
, =]
I,
,0=
]
I
1
,0
=(2$6)0,0"
2
0"21
,0
, $,! = 1$3
318
PROBLEM 5.9
Situation: Water ows in a rectangular channel. The velocity prole is , (E' ?) =,.(1 " 4E2$. 2)(1 " ?2$12)' where . and 1 are the channel width and depth,respectively.
Find: An expression for the discharge: ] = ](,.' 1' . )
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
] =
ZV · AA =
Z Z, (E' ?)AEA?
=
Z M*2
"M*2
Z 9
3=0
,.(1" 4E2$. 2)(1" ?2$12)A?AE
] = (4$9),..1
319
PROBLEM 5.10
Situation: Water ows in a 4 ft pipe. The velocity prole is linear. The center linevelocity is ,max = 15 ft/s. The velocity at the wall is ,min = 12 ft/s.
Find: Discharge in cfs and gpm.
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
] =
Z
=
, AI
=
Z K0
0
, 203A3
where , = ,max " 33$30!
] =
Z K0
0
(,max " (33$30))203A3
= 20320((,max$2)" (3$3))= 20 × 4!00((15$2)" (3$3))
] = 163!4 cfs
= 163!4× 449] = 73' 370 gpm
320
PROBLEM 5.11
Situation: Water ows in a 2 m pipe. The velocity prole is linear. The center linevelocity is ,max = 8 m/s and the velocity at the wall is ,min = 6 m/s.
Find: (a) Discharge: ](b) Mean velocity: ,
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
] = 20320((,max$2)" (2$3)) (see problem 5.10 for derivation)
= 20 × 1((8$2)" (2$3))
] = 20!94 m3/s
, = ]$I = 20!94$(0 × 1)
, = 6!67 m/s
321
PROBLEM 5.12
Situation: Air ows in a square duct with velocity prole shown in the gure.
Find: (a) Volume ow rate: ](b) Mean velocity: ,(c) Mass ow rate: / (if density is 1.2 kg/m3)
ANALYSIS
A] = , AI
A] = (20?)A?
] = 2
Z 045
0
, AI
= 2
Z 045
0
20?A?
= 40?2$2|0450= 20× 0!25
] = 5 m3/s
, = ]$I
= (5 m3$s)/(1 m2)
, = 5 m/s
/ = #]
= (1!2 kg/m3)(5 m3$s)
/ = 6!0 kg/s
322
PROBLEM 5.13
Situation: An open channel ow has a 30! incline. , = 18 ft/s. Vertical depth is 4ft. Width is 25 ft.
Find: Discharge: ]
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
] = , ×I= 18× 4 cos 30! × 25
] = 1' 560 cfs
323
PROBLEM 5.14
Situation: An open channel ow has a 30! incline. Velocity prole is @ = ?1*3 m/s.Vertical depth is 1 m. Width is 1.5 m.
Find: Discharge: ]
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
] =
Z 04866
0
?1*3(2 dy)
= 1!5
Z 04866
0
?1*3dy
= (1!5$(4$3))?4*3|04866 m0
] = 0!93 m3/s
324
PROBLEM 5.15
Situation: Open channel ow down a 30! incline. Velocity prole is @ = 10 (=3 " 1)m/s. Vertical depth is 1 m and width is 2 m.
Find: (a) Discharge: ](b) Mean velocity: ,
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
] =
Z 04866
0
, A?
] =
Z 04866
0
(10)(=3 " 1)2 dy
= [(2)(10)(=3 " ?)]048660
] = 10!23 m3/s
, = ]$I
= (10!23 m3$s)/(2× 0!866 m2)
, = 5!91 m/s
325
PROBLEM 5.16
Situation: Water (20! C, ( = 9790 N/m3) enters a weigh tank for 15 min. Theweight change is 20 kN.
Find: Discharge: ]
ANALYSIS
] = ,$!P
= ./((!P)
= 20' 000$(9790× 15× 60)
] = 2!27× 10"3 m3/s
326
PROBLEM 5.17
Situation: Water enters a lock for a ship canal through 180 ports. Port area is 2× 2ft. Lock dimensions (plan view) are 105 × 900 ft. The water in the lock rises at 6ft/min.
Find: Mean velocity in each port: ,,!K5
APPROACH
Apply the continuity principle.
ANALYSIS
Continuity principle
X,,I, = ,rise ×Irise
180× ,, × (2× 2) = (6$60)× (105× 900)
,port = 13!1 ft/s
327
PROBLEM 5.18
Situation: Water ows through a rectangular and horizontal open channel. Thevelocity prole is @ = @max(?$A):' where y is depth, @max = 3 m/s, A = 1!2 m, andQ = 1$6!
Find: (a) Discharge: ^(m3/s per meter of channel width).(b) Mean velocity: ,
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
^ =
Z A
0
@max(?$A):A? = @maxA$(Q+ 1)
= 3× 1!2$((1$6) + 1)
^ = 3!09 m2/s
, = ^$A
= 3!09$1!2
, = 2!57 m/s
328
PROBLEM 5.19
Situation: A ow with a linear velocity prole occurs in a triangular-shaped openchannel. The maximum velocity is 6 ft/s.
Find: Discharge: ]
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
] =
Z, AI
where , = 5? ft/s' AI = EA? = 0!5 ?A? ft2
^ =
Z 1
0
(6?)× (0!5?A?)
= (3?3$3)|10^ = 1 cfs
329
PROBLEM 5.20
Situation: Flow in a circular pipe. The velocity prole is , = ,1(1" (3$3!)):.
Find: An expression for mean velocity of the form , = , (,1' Q)!
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
] =
Z
=
, AI
=
Z K0
0
,1(1" (3$320)):203A3
= "0320,1Z K!
0
(1" (3$30)2):("23$32!)A3
This integral is in the form of
Z U
0
@:A@ = \:+1$(Q+ 1)
so the result is
] = "0320,1(1" (3$30)2):+1$(Q+ 1)|K00
= (1$(Q+ 1)),10320
, = ]$I
, = (1$(Q+ 1)),1
330
PROBLEM 5.21
Situation: Flow in a pipe has a velocity prole of , = 12(1" 32$32!)
Find: (a) Plot the velocity prole(b) Mean velocity: ,(c) Discharge: ]
APPROACH
Apply the ow rate equation.
ANALYSIS
3$30 1" (3$30)2 , (m/s)0.0 1.00 12.00.2 0.96 11.50.4 0.84 10.10.6 0.64 7.680.8 0.36 4.321.0 0.00 0.0
] =
Z
=
, AI
=
Z K0
0
,1(1" (3$320))203A3
= "0320,1Z K!
0
(1" (3$30)2)("23$32!)A3
= (1$2),10320
, = ]$I
, = (1$2),1
, = 6 m/s
331
Flow rate equation
] = , I
= 6× 0$4× 12
] = 4!71 m3/s
332
PROBLEM 5.22
Situation: Water (60 !F) ows in a 1.5 in. diameter pipe. / = 80 lbm/min.
Find: Mean velocity: ,
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
, = /$#I
, = (80$60)$£(62!37)× (0$4× (1!5$12)2)
¤
, = 1!74 ft/s
333
PROBLEM 5.23
Situation: Water (20 !C) ows in a 20 cm diameter pipe. / = 1000 kg/min.
Find: Mean velocity: ,
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
, = /$#I
= (1' 000$60)$£(998)× (0$4× 0!202)
¤
, = 0!532 m/s
334
PROBLEM 5.24
Situation: Water (60 !F) enters a weigh tank for 10 min. The weight change is 4765lbf.
Find: Discharge: ] in units of cfs and gpm
ANALYSIS
] = ,$!P
= !./((!P)
= 4765$(62!37× 10× 60)
] = 0!127 cfs
= 0!127× 449] = 57!0 gpm
335
PROBLEM 5.25
Situation: Water (60 !F) ows in a 4 in. diameter pipe. , = 8 ft/s.
Find: (a) Discharge: ] in units of cfs and gpm(b) Mass ow rate: /
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
] = , I
= 8(0$4× (4$12)2)
] = 0!698 cfs
= 0!698× 449] = 313 gpm
Mass ow rate
/ = #]
= 1!94× 0!698/ = 1!35 slugs/s
336
PROBLEM 5.26
Situation: As shown in the sketch below, two round plates, each with speed , , movetogether. At the instant shown, the plate spacing in h. Air ows across sectionA with a speed , 0. Assume , 0 is constant across section A. Assume the air hasconstant density.
r
Find: An expression for the radial component of convective acceleration at section A.
APPROACH
Apply the continuity principle to the control volume dened in the problem sketch.
ANALYSIS
Continuity principle
/! " /# = "A$APZ
c.v.#AV–
#, 0I0 = "("2#, I)2, I = , 0I0
The control volume has radius 3 so
, 0 = 2, I$I0 = 2, (032)$(203M) = , 3$M
Convective acceleration
C1 = , 0[$[3(, 0)
= , 3$M [$[3(, 3$M)
= , 23$M2
C1 = ,21$2M2
337
PROBLEM 5.27
As shown in the sketch below, two round plates, each with speed , , move together.At the instant shown, the plate spacing in h. Air ows across section A with a speed, 0. Assume , 0 is constant across section A. Assume the air has constant density.
r
Find: An expression for the radial component of local acceleration at section A.
APPROACH
Apply the continuity principle to the control volume dened in the problem sketch .
ANALYSIS
Continuity principle
/! " /# = "A$APZ
c.v.#AV–
#, 0I0 = "("2#, I)2, I = , 0I0
Control volume has radius 3 so
, 0 = 2, I$I0 = 2, (032)$(203M) = , 3$M
Introducing time as a parameter
M = M0 " 2, P
so, 0 = 3,$(M0 " 2, P)
Local acceleration
[, 0$[P = [$[P[3, (M0 " 2, P)"1] = 3, ("1)(M0 " 2, P)"2("2, )[, 0$[P = 23, 2$(M0 " 2, P)2
but M0 " 2, P = M and 3 = " so
[, 0$[P = 2", 2$M2
[, 0$[P = 1, 2$M2
338
PROBLEM 5.28
Situation: Pipe ows A and B merge into a single pipe with area Iexit = 0!1 m2.]= = 0!02P m3$s and ]> = 0!008P2 m3$s.
Find: (a) Velocity at the exit: ,exit(b) Acceleration at the exit: Cexit
Assumptions: Incompressible ow.
APPROACH
Apply the continuity principle.
ANALYSIS
Continuity principle
]exit = ]= +]>
,exit = (1$Iexit)(]= +]>)
= (1$0!01 m2)(!02P m3/s + 0!008P2 m3/s)
= 2P m/s + 0!8P2 m/s
Then at P = 1 sec,,exit = 2!8 m/s
Acceleration
Cexit =[,
[P+ ,
[,
[E
Since V varies with time, but not with position, this becomes
Cexit =[,
[P= 2 + 1!6P m/s
Then at P = 1 secCexit = 3!6 m/s2
339
PROBLEM 5.29
Situation: Air ow downward through a pipe and then outward between to paralleldisks. Details are provided on the gure in the textbook.
Find: (a) Expression for acceleration at point A.(b) Value of acceleration at point A.(c) Velocity in the pipe.
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
,K = ]$I = ]$(203M)
C1 = ,K[,K$[3
= (]$(203M))("1)(])$(2032M)
C1 = "]2$(3(203M)2)
When 1 = 0!1 m' 3 = 0!20 m' M = 0!005 m' and ] = 0!380 m3/s
,pipe = ]$Ipipe
= 0!380$((0$4)× 0!12)
,pipe = 48!4 m/s
Then
C1 = "(0!38)2$((0!2)(20 × 0!2× 0!005)2)
C1 = "18' 288 m/s2
340
PROBLEM 5.30
Situation: Air ow downward through a pipe and then outward between to paralleldisks as illustrated on gure in problem.
Find: (a) At P = 2 s, acceleration at point A: C2&(b) At P = 3 s, acceleration at point A: C3&
ANALYSIS
C< = [,$[P = [$[P(]$(203M))
C< = [$[P(]0(P$P0)$(203M))
C< = (]0$P0)$203M
C<;2I3 = (0!1$1)$(20 × 0!20× 0!01) = 7!958 m/s2
From solution to Problem 5.29
C1 = "]2$(3(203M)2)
At P = 29'] = 0!2 m3$s
C1I2& = "1266 m/s2
C2& = C< + C1 = 7!957" 1' 266
C2& = "1' 258 m/s2
At P = 3s, ] = 0!3 m3$s
C1I3& = "2' 850 m/s2
C3& = "2' 850 + 7!957
C3& = "2' 840 m/s2
341
PROBLEM 5.31
Situation: Water ows into a tank through a pipe on the side and then out the bottomof the tank with velocity
&2)M. Water rising in tank at 0.1 cm/s.
Find: Velocity in the inlet: ,in
APPROACH
Apply the continuity principle. Let the control surface surround the liquid in thetank and let it follow the liquid surface at the top.
ANALYSIS
Continuity principle
/! " /# = "A
AP
Z
cv
#A(
"#,inIin + #,outIout = "A
AP(#ItankM)
",inIin + ,outIout = "Itank(AM$AP)
",in(!0025) +p2g(1)(!0025) = "0!1(0!1)× 10"2
,in =
&19!62(!0025) + 10"4
0!0025
,in = 4!47 m/s
342
PROBLEM 5.32
Situation: A bicycle tire (( = 0!04 ft3) is inated with air at an inlet ow rate of]in = 1 cfm and a density of 0.075 lbm/ft3. The density of the air in the inatedtire is 0.4 lbm/ft3.
Find: Time needed to inate the tire: P
APPROACH
Apply the continuity principle. Select a control volume surrounding the air withintire.
ANALYSIS
Continuity principle
(#])in =A
AP+cv
This equation may be integrated to give
(#])in P =+CV
or
P =+CV
(#])in
=0!04× 0!4
0!075× (1$60)P = 12!8 s
343
PROBLEM 5.33
Situation: Conditions in two ow cases are described in the problem statement.
Find: (a) Value of b.(b) Value of ADsys$AP!(c) Value of
P>#V ·A
(d) Value of A$APRcv >#AV–
ANALYSIS
Case (a) Case (b)1) > = 1 1) D = 12) ADsys$AP = 0 2) ADsys$AP = 03)
P>#V ·A =
P#V ·A 3)
P>#V ·A =
P#V ·A
= "2× 12× 1!5 = 2× 1× 2= "36 slugs/s "1× 2× 2 = 0
4) A$APRcv >#AV– = +36 slugs/s 4) A$AP
Rcv >#AV– = 0
344
PROBLEM 5.34
Situation: Mass is owing into and out of a tank
Find: Select the statement that is true.
ANALYSIS
Mass ow out
/o = (#I, )2
= 2× 0!2× 5= 2 kg/s
Mass ow in
/i = (#I, )1
= 3× 0!1× 10= 3 kg/s
Only selection (b) is valid.
345
PROBLEM 5.35
Situation: The level in the tank (see below) is inuenced by the motion of pistons Aand B. Each piston moves to the left. ,= = 2,>
Find: Determine whether the water level is rising, falling or staying the same.
APPROACH
Apply the continuity principle. Select a control volume as shown above. Assume itis coincident with and moves with the water surface.
ANALYSIS
Continuity principle
/! " /# = "A$APZ
cv#AV–
#2,>I= " #,>I> = "#A$APZ
cvAV–
where I= = (0$4)32;I> = (0$4)62 and I= = (1$4)I>! Then
2,>(1$4)I> " ,>I> = "A$APZ
)?
A,
,>I>((1$2)" 1) = "A$APZ
)?
AV–
A$AP
Z
)?
AV– = (1$2),>I>
A$AP(IM) = ($12),>I>
IAM$AP = (1$2),>I>
Because (1$2),>I> is positive AM$AP is positive; therefore, one concludes that thewater surface is rising.
346
PROBLEM 5.36
Situation: A piston in a cylinder is moving up and control consists of volume incylinder.
Find: Indicate which of the following statements are true.
ANALYSIS
a) True b) True c) True d) True e) True
347
PROBLEM 5.37
Situation: A control volume is described in the problem statement.
Find: (a) Value of >.(b) Value of ADsys$AP!(c) Value of
P>#V ·A!
(d) Value of A$APR>#AV–.
ANALYSIS
a) > = 1!0
b) ADsys$AP = 0
c)X
>#V ·A =X
#V ·AX
#V ·A = (1!5 kg/m3)("10 m/s)(0$4)× (0!04)2 m2
+ (1!5 kg/m3)("6 m/s)(0$4)× (0!04)2 m2
+ (1!2 kg/m3)(6 m/s)(0$4)× (0!06)2 m2
= "0!00980 kg/s
d) BecauseX
>#V ·A+ A$APZ>#AV– = 0
Then A$APZ>#AV– = "
X>#V ·A
or A$APR>#A," = +0!00980 kg/s (mass is increasing in tank)
348
PROBLEM 5.38
Situation: A plunger moves downward in a conical vessel lled with oil. At a certaininstant in time, the upward velocity of the oil equals the downward velocity of theplunger.
Find: Distance from the bottom of the vessel: ?
ANALYSIS
Select a control volume surrounding the liquid. The rate at which volume of uid isdisplaced upward is
,up(12 " A2)(0$4)
From the continuity principle
,down × 0A2$4 = ,up(12 " A2)0$4
2A2 = 12
1 =&2A
But ?$1 = 24A$2A so 1 = ?$12 so
? = 12&2A
349
PROBLEM 5.39
Situation: A 6 in. diameter cylinder falls at a speed ,) = 3 ft/s. The containerdiameter is 8 in.
Find: Mean velocity (,- ) of the liquid in the space between the cylinder and the wall.
APPROACH
Apply continuity principle and let the c.s. be xed except at the bottom of thecylinder where the c.s. follows the cylinder as it moves down.
ANALYSIS
Continuity principle
0 = A$AP
Z#AV–+ /! " /#
0 = A$AP(V–)+ ,-I=0 = ,)I) + ,- (0$4)(8
2 " 62)0 = "3× (0$4)62 + ,- (0$4)(82 " 62),- = 108$(64" 36)
,- = 3!86 ft/s (upward)
350
PROBLEM 5.40
Situation: A round tank (1 = 4 ft) is being lled with water from a 1 ft diameterpipe. In the pipe, , = 10 ft/s
Find: Rate at which the water surface is rising: ,F
APPROACH
Apply the continuity principle and let the c.s. move up with the water surface in thetank.
ANALYSIS
Continuity principle
0 = A$AP
Z
)?
#AV–+ /! " /#
0 = A$AP(MI- )" ((10 + ,F)I,)
where I- = tank area, ,F =rise velocity and I, =pipe area.
0 = I-AM$AP" 10I, " ,FI,
but AM$AP = ,F so
0 = I-,F " 10I, " ,FI,,F = (10I,)$(I- "I,) = 10(0$4)(12)$((0$4)42 " (0$4)12)
,F = (2$3) ft/s
351
PROBLEM 5.41
Situation: An 8 in. sphere is falling at 4 ft/s in a 1 ft diameter cylinder lled withwater
4
Find: Velocity of water at the midsection of the sphere
APPROACH
Apply the continuity equation.
ANALYSIS
As shown in the above sketch, select a control volume that is attached to the fallingsphere. Relative to the sphere, the velocity entering the control volume is ,1 and thevelocity exiting is ,2Continuity equation
"A$APZ
)?
#A, = 0 = /# " /!
I1,1 = I2,2
(0 × 1!02$4)× 4 = ,20(1!02 " !672)$4
,2 = 7!26 fps
The velocity of the water relative to a stationary observer is
, = ,2 " ,&,7GKG, = 7!26" 4!0
= 3.26 ft/s
352
PROBLEM 5.42
Situation: Air ows in a rectangular duct. ] = 1!44 m3$s.
Find: (a) Air speed for a duct of dimensions 20× 50 cm: ,1(b) Air speed for a duct of dimensions 10× 40 cm: ,2
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
,1 = ]$I1
= 1!44$(0!2× 0!5)
,1 = 14!4 m/s
,2 = 1!44$(0!1× 0!4)
,2 = 36!0 m/s
353
PROBLEM 5.43
Situation: Flow (] = 0!3 m3/s) enters a pipe that has an inlet diameter of 30 cm.Outlet diameters are 20 and 15 cm. Each outlet branch has the same mean velocity.
Find: Discharge in each outlet branch: ]20 cm, ]15 cm
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
, = 0!3$(0$4)(0!22 + 0!152)
= 6!11 m/s
]20 cm = , I20
= 6!11× (0 × 0!1× 0!1)
]20 cm = 0!192 m3/s
]15 cm = , I15
= 6!11× (0 × 0!075× 0!075)
]15 cm = 0!108 m3/s
354
PROBLEM 5.44
Situation: Flow (] = 0!3 m3/s) enters a pipe that has an inlet diameter of 30 cm.Outlet diameters are 20 and 15 cm. In the larger outlet (20 cm) the ow rate is twicethat in the smaller outlet (15 cm).
Find: Mean velocity in each outlet branch: ,15, ,20
ANALYSIS
Continuity principle]tot. = 0!30 m3/s = ]20 +]15
Since ]20 = 2]15
0!30 = 2]15 +]15
]15 = 0!10 m3/s;
]20 = 0!20 m3/s;
Flow rate equation
,15 = ]15$I15
,15 = 5!66 m/s
,20 = 0!20$I20
,20 = 6!37 m/s
355
PROBLEM 5.45
Situation: Water ows through an 8 in. diameter pipe that is in series with a 6 inpipe. ] = 898 gpm.
Find: Mean velocity in each pipe: ,6, ,8
APPROACH
Apply the ow rate equation.
ANALYSIS
Flow rate equation
] = 898 gpm = 2 cfs
,8 = ]$I8
= 2$(0 × 0!667× 0!667$4)
,8 = 5!72 fps
,6 = ]$I6
= 2$(0 × 0!5× 0!5$4)
,6 = 10!19 fps
356
PROBLEM 5.46
Situation: Water ows through a tee as shown in gure in the textbook.
Find: Mean velocity in outlet B: ,>
APPROACH
Apply the continuity principle.
ANALYSIS
Continuity principle
,> = (,=I= " ,1I1)$I>= [(6× 0$4× 42)" (4× 0$4× 22)]$(0$4× 42)
,> = 5!00 m/s
357
PROBLEM 5.47
Situation: Gas ows in a round conduit which tapers from 1.2 m to 60 cm. Detailsare provided on the gure with the problem statement.
Find: Mean velocity at section 2: ,2
APPROACH
Apply the continuity principle.
ANALYSIS
Continuity principle
,2 = (#1I1,1)$(#2I2)
= (#1121,1)$(#21
22)
= (2!0× 1!22 × 15)$(1!5× 0!62)
,2 = 80!0 m/s
358
PROBLEM 5.48
Situation: Pipes A and B are connected to an open tank with surface area 80 ft2.The ow rate in pipe A is ]= = 8 cfm, and the level in the tank is rising at a rate of1.0 in./min.
Find: (a) Discharge in pipe B: ]>(b) If ow in pipe B entering or leaving the tank.
APPROACH
Apply the continuity principle. Dene a control volume as shown in the above sketch.Let the c.s. move upward with the water surface.
ANALYSIS
Continuity principle
0 = A$AP
Z
)?
#AV–+X
#V ·A
0 = IAM$AP+]> "]=]> = ]= "I AM$AP
= 8" (80)(1!0$12)
]> = +1!33 cfm
Because ]> is positive ow is leaving the tank through pipe D.
359
PROBLEM 5.49
Situation: A tank with one inow and two outows indicated by diagram with prob-lem statement.
Find: (a) Is the tank lling or emptying.(b) Rate at which the tank level is changing: A7
A5
ANALYSIS
Inow = 10× 0 × 22$144 = 0!8727 cfsOutow = (7× 0 × 32$144) + (4× 0 × 1!52$144) = 1!571 cfsOutow F Inow, Thus, tank is emptying
AM
AP= "]$I
= "(1!571" 0!8727)$(0 × 32)A7A5= "0!0247 ft/s
360
PROBLEM 5.50
Situation: The sketch shows a tank lled with water at time P = 0 s.
Find: (a) At P = 22 s, if the the water surface will be rising or falling.(b) Rate at which the tank level is changing: A7
A5
APPROACH
Apply the continuity principle. Dene a control volume in which the control surface(c.s.) is coincident with the water surface and moving with it.
ANALYSIS
Continuity principle
A$AP
Z
1@
#AV– = /# " /!
A$AP(#IM) = (#I, )in " (#I, )outA$AP(#IM) = #(0$4× 12)(1) + #(0$4× 0!52)(2)IAM$AP = (0$4)" (0$8)IAM$AP = (0$8)
Since IAM$AP F 0, the water level must be rising. While the water column occupiesthe 12 in. section, the rate of rise is
AM$AP = (0$8) $I
= 0$(8× 0$4× 12)= 1$2 ft/s
Determine the time it takes the water surface to reach the 2 ft. section:
10 = (AM$AP)P;
P = (10)$(1$2) = 20 secs.
Therefore, at the end of 20 sec. the water surface will be in the 2 ft. section. Thenthe rise velocity will be:
361
AM$AP = 0$(8I)
= 0$(8× 0$4× 22)
AM$AP = 1$8 ft/sec
362
PROBLEM 5.51
Situation: A lake is fed by one inlet, ]#: = 1000 cfs. Evaporation is 13 cfs per squaremile of lake surface. Lake surface area is I(M) = 4!5+5!5M, where M is depth in feet.
Find: (a) Equilibrium depth of lake.(b) The minimum discharge to prevent the lake from drying up.
Assumptions: Equilibrium.
APPROACH
Apply the continuity principle.
ANALYSIS
Continuity principle
]Evap. = ]in.¡13 ft3/s/mi2
¢(4!5 + 5!5M) mi2 = 1' 000 ft3/s
Solve for depth M :M = 13!2 ft. at equilibrium
The lake will dry up when M = 0 and ]Evap. = ]in.. For M = 0,
13(4!5 + 5!5× 0) = ]in.
Lake will dry up when ]in. = 58!5 ft3$s
363
PROBLEM 5.52
Situation: A nozzle discharges water (]! = 5 cfs) onto a plate moving towards thenozzle. Plate speed equals half the jet speed.
Find: Rate at which the plate deects water: ],
APPROACH
Apply the continuity principle. Select a control volume surrounding the plate andmoving with the plate.
ANALYSIS
Continuity principle]#: = ],
Reference velocities to the moving plate. Let ,! be the speed of the water jet relativeto the nozzle. From the moving plate, the water has a speed of ,! + 1$2,! = 3,!$2!Thus
], = ]#:
= ,#:I!
= (3,!$2) (I!) = (3$2) (,!I!)
= (3$2)]!
], = 7!5 cfs
364
PROBLEM 5.53
Situation: A tank with a depth M has one inow (] = 20 ft3/s) and one outowthrough a 1 ft diameter pipe. The outow velocity is
&2)M!
Find: Equilibrium depth of liquid.
APPROACH
Apply the continuity principle and the ow rate equation.
ANALYSIS
Continuity principle
]in. = ]out at equilibrium
]out = 20 ft3$ s
Flow rate equation
]out = ,outIout
20 = (p2)M)(0$4× A2out) where A = 1 ft.
Solving for M yieldsM = 10!1 ft.
365
PROBLEM 5.54
Situation: Flows with di!erent specic weights enter a closed tank through ports Aand B and exit the tank through port C. Assume steady ow. Details are providedon gure with problem statement.
Find: At section C:(a) Mass ow rate.(b) Average velocity.(c) Specic gravity of the mixture.
Assumptions: Steady state.
APPROACH
Apply the continuity principle and the ow rate equation.
ANALYSIS
Continuity principle
X/# "
X/! = 0
"#=,=I= " #>,>I> + #),)I) = 0
#),)I) = 0!95× 1!94× 3 + 0!85× 1!94× 1
/ = 7!18 slugs/s
Continuity principle, assuming incompressible ow
,)I) = ,=I= + ,>I>
= 3 + 1 = 4 cfs
Flow rate equation
,) = ]$I = 4$[0$4(1$2)2]
=20.4 ft/s
#) = 7!18$4 = 1!795 slugs/ft3
6 = 1!795$1!94
6 = 0!925
366
PROBLEM 5.55
Situation: O2 and CH4 enter a mixer, each with a velocity of 5 m/s. Mixer conditions:200 kPa-abs., 100 !-! Outlet density: # = 2!2 kg/m3! Flow areas: 1 cm2 for theCH4, 3 cm2 for the O2' and 3 cm2 for the exit mixture.
Find: Exit velocity of the gas mixture: ,exit
APPROACH
Apply the ideal gas law to nd inlet density. Then apply the continuity principle.
ANALYSIS
Ideal gas law
#02 = %$"&
= 200' 000$(260× 373)= 2!06 kg/m3
#)64 = 200' 000$(518× 373)= 1!03 kg/m3
Continuity principle
X/# =
X/!
#e,eIe = #O2,O2IO2 + #CH4,CH4ICH4,e = (2!06× 5× 3 + 1!03× 5× 1)$(2!2× 3)
,e = 5!46 m/s
367
PROBLEM 5.56
Situation: A 10 m3 tank is lled with air from a compressor with mass ow rate/ = 0!5#!$# and initial density is 2 kg/m
3!
Find: Time to increased the density of the air in the tank by a factor of 2.
APPROACH
Apply the continuity principle.
ANALYSIS
Continuity principle
/! " /# = "A
AP
Z
)?
#A(
"A$AP(#() = " /#
((A#$AP) = 0!5#0$#
Separating variables and integrating
#A# = 0!5#0AP$(#2$2|(0 = 0!5#0!P$(
(#2( " #20)$2 = 0!5#0!P$(!P = (#0
¡(#2($#
20)" 1
¢
= 10(2)(22 " 1)!P = 60s
368
PROBLEM 5.57
Situation: A tire (volume 0.5 ft3) develops a slow leak. In 3 hr, the pressure dropsfrom 30 to 25 psig. The leak rate is / = 0!68%I$
&"& , where I is the area of the
hole. Tire volume and temperature (60 !F) remain constant. %'5" = 14 psia.
Find: Area of the leak.
APPROACH
Apply the continuity principle.
ANALYSIS
Continuity principle/!T5 = "A$AP(#V–)
Ideal gas law# = %$"&
Combining previous 2 equations
/!T5 = "(V–$"& )(A%$AP)
Let /!T5 = 0!68I$&"& in the above equation
0!68%I$&"& = "(V–$"& )(A%$AP)
Separating variables and integrating
(1$%)(A%$AP) = "(0!68I&"& )$V–
LQ(%0$%) = (0!68I&"&P)$V–
Finding area
I = (V–$0!68P&"& )LQ(%0$%)
= (0!5$[(0!68× 3× 3' 600)p1' 716× 520]LQ(44$39)
I = 8!69× 10"9 ft2 = 1!25× 10"6 in2
369
PROBLEM 5.58
Situation: An O2 bottle (18 !C) leaks oxygen through a small orice (A = 0!15mm). As time progresses, the pressure drops from 10 to 5 MPa, abs. The leak rateis / = 0!68%I$
&"& , where I is the area of the orice.
Find: Time required for the specied pressure change.
APPROACH
Apply the continuity principle and the ideal gas law.
ANALYSIS
Continuity principle/!T5 = "A$AP(#V–)
Ideal gas law# = %$"&
Combining previous 2 equations
/!T5 = "(V–$"& )(A%$AP)
Let /!T5 = 0!68I$&"& in the above equation
0!68%I$&"& = "(V–$"& )(A%$AP)
Separating variables and integrating
(1$%)(A%$AP) = "(0!68I&"& )$V–
LQ(%0$%) = (0!68I&"&P)$V–
Finding time
P = (V–$0!68I&"& )LQ(%0$%)
= 0!1LQ(10$5)$(0!68(0$4)(1!5× 10"4)2&260× 291) = 21' 000 s
P = 5h 50 min!
370
PROBLEM 5.59
Situation: A 60-cm tank is draining through an orice. The water surface dropsfrom 3 to 0.3 m.
Find: Time required for the water surface to drop the specied distance (3 to 0.5 m).
ANALYSIS
From example 5-7 the time to decrease the elevation from M1 to M is
P = (2I-$p2)I2)(M
1*21 " M1*2)
= 2× (0$4× 0!62)(&3"
&0!53)$(
&2× 9!81×(0$4)× 0!032)
P = 185 s
371
PROBLEM 5.60
Situation: A cylindrical drum of water is emptying through a pipe on the bottom.
1 = 2 ft.' " = 1 ft.,, =p2)M;2 = 4 ft.
A = 2 in. = 0!167 ft.' M0 = 1 ft.
Find: Time to empty the drum.
APPROACH
Apply the continuity principle. Let the control surface surround the water in thetank. Let the c.s. be coincident with the moving water surface. Thus, the controlvolume will decrease in volume as the tank empties. Let y denote elevation, andsituate the origin at the bottom of the tank.
ANALYSIS
Continuity principle
/! " /# = "A$APZ
cv#A(
+#, I = "A$APZ
cv#A( (1)
#p2)MI = "#A$AP(() (2)
APp2)MI = "A( (3)
Let A( = "2(2E)A?. Substituted into Eq. (3) we have
APp2)MI = 22EA? (4)
But M can be expressed as a function of ?:
M = "" ?
orAPp2)("" ?)I = 22EA?
Also
"2 = E2 + ?2
E =p?2 ""2 =
p(? "")(? +")
APp2)("" ?)I = 22
p(? "")(? +")A?
AP = (22$(p2)I))
p(? +")A? (5)
Integrate Eq. (5)
P|50 = (22$(p2)I))
Z F
0
p"+ ?A?
= (22$(p2)I))[(2$3)("+ ?)3*2]F0
P = (22$(p2)I))(2$3)((2")3*2 ""3*2)
372
For " = 1P = (22$(
p2)I))(2$3)(23*2 " 1) (6)
In Eq. (5) I = (0$4)A2 = 0!0219 ft2! Therefore
P = (2× 4$&64!4× 0!0219))(2$3)(1!828)
P = 55!5 s
COMMENTS The above solution assumes that the velocity of water is uniformacross the jet just as it leaves the tank. This is not exactly so, but the solutionshould yield a reasonable approximation.
373
PROBLEM 5.61
Situation: A pipe with discharge 0.03 ft3/s lls a funnel. Exit velocity from thefunnel is ,G =
&2)M' and exit diameter is 1 in. Funnel section area is I. = 0!1M2.
Find: Level in funnel at steady state: M
APPROACH
Apply the continuity principle.
ANALYSIS
Continuity principle (steady state)
/#: = /!T5
or#] = #IG
p2)M
Solving for M gives
M =1
2)
µ]
IG
¶2
=1
2× 32!2
µ!03
0$4× (1$12)2
¶2
M = 0!47 ft
374
PROBLEM 5.62
Situation: Water drains from a pressurized tank. Tank section area: 1 m2.
Exit velocity: ,G =q
2,L+ 2)M. Exit area: 10 cm3!
Supply pressure: % = 10 kPa. Initial tank level: M! = 2 m.
Find: Time for the tank to empty(a) with given supply pressure.(b) if supply pressure is zero.
APPROACH
Apply the continuity principle. Dene a control surface coincident with the tankwalls and the top of the uid in the tank.
ANALYSIS
Continuity principle
#A,
AP= "#IG,G
Density is constant. The di!erential volume is IAM so the above equation becomes
"IAM
IG,G= "AP
or
"IAM
IGq
2,L+ 2)M
= AP
Integrating this equation gives
"I
IG
1
)
µ2%
#+ 2)M
¶1*2|07!= !P
or
!P =I
IG
1
)
"µ2%
#+ 2)M!
¶1*2"µ2%
#
¶1*2#
and for I = 1 m2' IG = 10"3 m2' M! = 2 m, % = 10 kPa and # = 1000 kg/m3 resultsin
!P = 329 s or 5!48 min (supply pressure of 10 kPa)
For zero pressure in the tank, the time to empty is
!P =I
IG
s2M!)=639 s or
!P = 10!65 min (supply pressure of zero)
375
PROBLEM 5.63
Situation: A tapered tank drains through an orice at bottom of tank. The watervelocity in the orice is
&2)M. Dimensions of tank provided in the problem statement.
Find: (a) Derive a formula for the time to drain.(b) Calculate the time to drain.
APPROACH
Apply the continuity principle.
ANALYSIS
From continuity principle
] = "I- (AM$AP)AP = "I-AM$]
where ] =&2)MIV =
&2)M(0$4)A2V
I- = (0$4)(A+ -1M)2 = (0$4)(A2 + 2A-1M+ -
21M
2)
AP = "(A2 + 2A-1M+ -1M2)AM$(p2)M1*2A2V)
P = "Z 7
70
(A2 + 2A-1M+ -21M
2)AM$(p2)M1*2A2V)
P = (1$(A2Vp2)))
Z 70
7
(A2M"1*2 + 2A-1M1*2 + -21M
3*2)AM
P = (2$(A2Vp2)))
£A2M1*2 + (2$3)A-1M
3*2 + (1$5)-21M5*2¤707
Evaluating the limits of integration gives
P = (2$(A2Vp2)))
h(A2(M
1*20 " M1*2) + (2$3)A-1(M
3*20 " M3*2) + (1$5)-21(M
5*20 " M5*2)
i
Then for M0 = 1 m' M = 0!20 m, A = 0!20 m, -1 = 0!3' and AV = 0!05 m
P = 13!6 s
376
PROBLEM 5.64
Situation: Water drains out of a trough and water velocity at bottom of trough is&2)M! Trough dimensions are provided in the problem statement.
Find: (a) Derive a formula for the time to drain to depth h.(b) Calculate the time to drain to 1/2 of the original depth.
APPROACH
Apply the continuity principle.
ANALYSIS
Continuity principle
/! " /# = "A$APZ
)4?4
#AV–
#p2)MIG = "A$AP
Z
)4?4
#AV–
Mass of water in control volume = #D×Face area
+ = #D(.0M+ M2 tanT)
Then
#p2)MIG = "A$AP #D(.0M+ M
2 tanT)p2)MIG = "D.0(AM$AP)" 2DM tanT(AM$AP)
AP = (1$(p2)IG))("D.0M
"1*2AM" 2D tanTM1*2AM)
Integrate
P = (1$p2)IG)
Z 7
70
"D.0M"1*2AM" 2D tanTM1*2AM
P = (1$(p2)IG))("2D.0M
1*2 " (4$3)D tanTM3*2)770
P = (&2DM
3*20 $(
&)IG))((.0$M0)(1" (M$M0)045) + (2$3) tanT(1" (M$M0)145))
For .0$M0 = 0!2' T = 30!' IG)
045$(M1450 D) = 0!01 sec."1 and h/h0 = 0!5 we get
P = 43!5 seconds
377
PROBLEM 5.65
Situation: Water drains out of a spherical tank. Tank diameter: 1 m. Hole diameter:1 cm.Exit velocity: ,G =
&2)M. At time zero, the tank is half full.
Find: Time required to empty the tank.
APPROACH
Apply the continuity principle. Select a control volume that is inside of the tank andlevel with the top of the liquid surface.
ANALYSIS
Continuity principle
#A(AP= "#IG,G
LetA(AP=A(IM)
AP= I
AM
AP
Continuity becomesAM
AP= "
IGI
p2)M
The cross-sectional area in terms of " and M is
I = 0["2 " ("" M)2] = 0(2"M" M2)
Substituting into the di!erential equation gives
0("2"M+ M2)IG&2)M
AM = AP
or0
&2)IG
¡"2"M1*2 + M3*2
¢AM = AP
Integrating this equation results in
0&2)IG
µ"4
3"M3*2 +
2
5M5*2
¶|0F= !P
Substituting in the limits yields
0&2)IG
14
15"5*2 = !P
For " = 0!5 m and IG = 7!85× 10"5 m2, the time to empty the tank is
!P = 1491 s or 24!8 min
378
PROBLEM 5.66
Situation: A tank containing oil is described in the problem statement.
Find: Predict the depth of the oil with time for a one hour period.
ANALYSIS
The numerical solution provides the following results:
Time, min
0 10 20 30 40 50 60 70
Dep
th, m
1
2
3
4
5
6
379
PROBLEM 5.67
Situation: An end-burning rocket motor has chamber diameter of 10 cm and nozzleexit diameter of 8 cm. Propellant density is 1800 kg/m3 and regression rate is 1 cm/s.Pressure and temperature at exit plane are 10 kPa abs and 2000oC. Gas constant is415 J/kgK.
Find: Gas velocity at nozzle exit plane: ,G
APPROACH
Apply the continuity principle and the ideal gas law.
ANALYSIS
Ideal gas law
#G = %$"&
= 10' 000$(415× 2273) = 0!0106 kg/m3
The rate of mass decease of the solid propellant is #,I1 3 where #, is the propellantdensity, I1 is the chamber cross-sectional area and 3 is the regression rate. This isequal to the mass ow rate supplied to the chamber or across the control surface.From the continuity principle
,G = #,I1 3$ (#GIG)
= 0!01× 1' 750× (0$4× 0!12)$£0!0106×
¡0$4× 0!082
¢¤
,G = 2' 850 m/s
380
PROBLEM 5.68
Situation: An cylindrical-port rocket motor has internal diameter of 20 cm. Propel-lant with density of 2000 kg/m3 regresses at 1.2 cm/s. Inside propellant diameter is12 cm and length is 40 cm. Diameter of rocket exit is 20 cm and velocity is 2000 m/s.
Find: Gas density at the exit: #G
ANALYSIS
ID = 012+ 2(0$4)(120 "1
2)
= 0 × 0!12× 0!4 + (0$2)(0!22 " 0!122) = 0!191 m2
#G = ,D#DID$(,GIG) = 0!012× 2' 000× 0!191$(2' 000× (0$4)× (0!20)2)
#G = 0!073 kg/m3
381
PROBLEM 5.69
Situation: Mass ow through rocket nozzle is / = 0!65%1I5$&"&1 and regression
rate is 3 = C%:1 ! Operates at 3.5 MPa and Q = 0!3!
Find: (a) Derive a formula for chamber pressure.(b) Calculate the increase in chamber pressure if a crack increases burn area by 20%.
APPROACH
Apply the ow rate equation.
ANALYSIS
Continuity principle. The mass ux o! the propellant surface equals ow rate throughnozzle.
#, 3ID = /
#,C%:1ID = 0!65%1I5$
p"&1
%1":1 = (C#,$0!65)(ID$I5)("&1)1*2
%1 = (C#,$0!65)1*(1":)(ID$I5)
1*(1":)("&1)1*(2(1":))
!%1 = 3!5(1 + 0!20)1*(1"043)
!%1 = 4!54 MPa
382
PROBLEM 5.70
Situation: A piston moves in a cylinder and drives exhaust gas out an exhaust portwith mass ow rate / = 0!65%1I@$
&"&1! Bore is 10 cm and upward piston velocity
is 30 m/s. Distance between piston and head is 10 cm. Valve opening 1 cm2' pressure300 kPa abs, chamber temperature 600oC and gas constant 350 J/kgK.
Find: Rate at which the gas density is changing in the cylinder: A#$AP
Assumptions: The gas in the cylinder has a uniform density and pressure. Ideal gas.
ANALYSIS
Continuity equation. Control volume is dened by piston and cylinder.
A$AP(#, ) + 0!65%1I@$p"&1 = 0
V–A#$AP+ #AV–$AP+ 0!65%1I@$p"&1 = 0
A#$AP = "(#$V–) AV–$AP" 0!65%1I@$V–p"&1
V– = (0$4)(0!1)2(0!1) = 7!854× 10"4 m3
(AV–$AP) = "(0$4)(0!1)2(30) = "0!2356 m3/s# = %$"& = 300' 000$(350× 873)= 0!982 kg/m3
A#$AP = "(0!982$7!854× 10"4)× ("0!2356)
"0!65× 300' 000× 1× 10"4
7!854× 10"4 ×&350× 873
A#$AP = 250 kg/m3·s
383
PROBLEM 5.71
Situation: The ow pattern through a pipe contraction is described in the problemstatement. Discharge of water is 70 cfs and pressure at point A is 3500 psf.
Find: Pressure at point D!
APPROACH
Apply the Bernoulli equation and the continuity principle.
ANALYSIS
Continuity principle
,= = ]$I= = 70$(0$4× 62) = 2!476 ft/s,> = ]$I> = 70$(0$4× 22) = 22!28 ft/s
Bernoulli equation
%=$( + ,2=$2) + R= = %>$( + ,
2>$2) + R>
%>$( = 3500$62!4" 2!482$64!4" 22!282$64!4" 4%> = 2775 lbf/ft2
%> = 19!2 lbf/in2
384
PROBLEM 5.72
Situation: The ow of water through a pipe contraction is described in the problemstatement. Velocity at point E is 50 ft/s and pressure and velocity at point C are 15psi and 10 ft/s.
Find: Pressure at point N!
APPROACH
Apply the Bernoulli equation.
ANALYSIS
Bernoulli equation Bernoulli equation applicable since ow steady, irrotational andnon-viscous.
%)$( + ,2)$(2)) + R) = %W$( + ,
2W$(2)) + RW
(15× 144)$( + 102$(2)) + R1 = %W$( + 502$(2)) + RW
%W$( = ((15× 144)$() + (1$2))(102 " 502) + R1 " RW%W = 15× 144 + (62!4$64!4)("2' 400)) + 62!4(3" 1)
= 2' 160 psf " 2' 325 psf+ 125 psf%W = "40 psf = "0!28 psi
385
PROBLEM 5.73
Situation: An annular venturimeter is mounted in a pipe with air ow at standardconditions. The pipe diameter is 4 in. and the ratio of the diameter of the cylindricalsection to the pipe is 0.8. A pressure di!erence of 2 in. of water is measured betweenthe pipe and cylindrical section. The ow is incompressible, inviscid and steady.
Find: Find the volume ow rate
APPROACH
Apply the Bernoulli equation.
ANALYSIS
Take point 1 as upstream in pipe and point 2 in annular section. The ow is incom-pressible, steady and inviscid so the Bernoulli equation applies
%1 + (R1 + #, 212= %2 + (R2 + #
, 222
Also R1 = R2! From the continuity equation
I1,1 = I2,2
ButI2 =
0
4(12 " A2)
so
I2I1
= 1"A2
12
= 1" 0!82
= 0!36
Therefore,2 =
,10!36
= 2!78,1
Substituting into the Bernoulli equation
%1 " %2 =#
2(, 22 " ,
21 )
=#
2, 21 (2!78
2 " 1)
= 3!36#, 21
The standard density is 0.00237 slug/ft3 and the pressure di!erence is
!% =2
1262!4
= 10!4 psf
386
Solving for ,1
, 21 =10!4
3!36× 0!00237= 1306
,1 = 36!14 ft/s
The discharge is
] = I1,1
= 36!14×0
4×µ4
12
¶2
= 3!15 cfs
Q=189.2 cfm
387
PROBLEM 5.74
Situation: A venturi-type applicator is used to spray liquid fertilizer. The exit-throatarea ratio is 2 and the exit diameter is 1 cm. Flow in venturi is 10 lpm. The entranceto the feed tube is 10 cm below venturi throat the level in the container is 5 cm abovethe entrance to the feed tube. The ow rate in the feed tube is 0.5
&!M in lpm and
!M is the di!erence in piezometric head in meters. The liquid fertilizer has samedensity as water.
Find: a) The ow rate of liquid fertilizer and b) the mixture ratio of fertilizer to waterat exit.
APPROACH
Use the continuity and Bernoulli equation to nd the pressure at the throat and usethis pressure to nd the di!erence in piezometric head and ow rate.
ANALYSIS
The Bernoulli equation is applicable between stations 1 (the throat) and 2 (the exit).
%1(+ R1 +
, 212)=%2(+ R2 +
, 222)
From the continuity equation
,1 =I2I1,2
= 2,2
Also R1 = R2 so
%1("%2(
=, 222)(1" 22)
= "3, 222)
At the exit %2 = 0 (gage)%1(= "3
, 222)
The ow rate is 10 lpm or
] = 10 lpm×1 min60 s
×10"3 m3
1 l= 0!166× 10"3 m3$s
The exit diameter is 1 cm so
I2 =0
40!012
= 7!85× 10"5 m2
388
The exit velocity is
,2 =]
I2=0!166× 10"3
7!85× 10"5= 2!12 m/s
Therefore
%1(
= "3×2!122
2× 9!81= "0!687 m
Let point 3 be the entrance to the feed tube. Then
!M = M3 " M1=
%3(+ R3 " (
%1(+ R1)
=%3("%1(+ (R3 " R1)
= 0!05" ("0!687)" 0!1= 0!637 m
a) The ow rate in the feed tube is
]( = 0!5&0!637
Q(=0.40 lpm
b) Concentration in the mixture
]2]2 +]%
=0!4
10 + 0!4
X%X%+X&
=0.038 (or 3.8%)
389
PROBLEM 5.75
Situation: Cavitation in a venturi section with inlet diameter of 40 cm and throatdiameter of 10 cm. Upstream pressure is 120 kPa gage and atmospheric pressure is100 kPa. Water temperature is 10oC.
Find: Discharge for incipient cavitation.
APPROACH
Apply the continuity principle and the Bernoulli equation.
ANALYSIS
Cavitation will occur when the pressure reaches the vapor pressure of the liquid(%? = 1' 230 Pa abs).Bernoulli equation
%= + #,2=$2 = %throat + #,
2throat$2
where ,= = ]$I= = ]$((0$4)× 0!402)Continuity principle
,throat = ]$Ithroat = ]$((0$4)× 0!102)#$2(, 2throat " ,
2=) = %= " %throat
(#]2$2)[1$((0$4)× 0!102)2 " 1$[((0$4)× 0!402)2]= 220' 000" 1' 230
500]2(16' 211" 63) = 218' 770
] = 0!165 m3/s
390
PROBLEM 5.76
Situation: Air with density 0.0644 lbm/ft3 ows upward in a vertical venturi witharea ratio of 0.5. Inlet velocity is 100 ft/s. Two pressure taps connected to manometerwith uid specic weight of 120 lbf/ft3.
Find: Deection of manometer.
Assumptions: Uniform air density.
APPROACH
Apply the Bernoulli equation from 1 to 2 and then the continuity principle. Letsection 1 be in the large duct where the manometer pipe is connected and section 2in the smaller duct at the level where the upper manometer pipe is connected.
ANALYSIS
Continuity principle
,1I1 = ,2I2
,2 = ,1(I1$I2)
= 100(2)
= 200 ft/s
Bernoulli equation
%;1 + #,21 $2 = %;2 + #,
22 $2
%;1 " %;2 = (1$2)#(, 22 " ,21 )
= (1$2)(0!0644$32!2)(40' 000" 10' 000)= 30 psf
Manometer equation
%;1 " %;2 = !M((liquid " (air)30 = !M(120" !0644)
!M = 0!25 ft.
391
PROBLEM 5.77
Situation: An atomizer utilizing a constriction in an air duct is described in theproblem statement.
Find: Design an operable atomizer.
ANALYSIS
Assume the bottom of the tube through which water will be drawn is 5 in. below theneck of the atomizer. Therefore if the atomizer is to operate at all, the pressure inthe necked down portion must be low enough to draw water 5 in. up the tube. Inother words %neck must be "(5$12)(water = "26 psfg. Let the outlet diameter of theatomizer be 0.5 in. and the neck diameter be 0.25 in. Assume that the change inarea from neck to outlet is gradual enough to prevent separation so that the Bernoulliequation will be valid between these sections. Thus
%: + #,2: $2 = %0 + #,
20 $2
were Q and 0 refer to the neck and outlet sections respectively. But
%: = "26 psfg and %0 = 0
or"26 + #, 20 $2 = #,
20 $2 (1)
,:I: = ,0I0
,: = ,0I0$I: (2)
= ,0(!5$!25)2
,: = 4,0
Eliminate ,: between Eqs. (1) and (2)
"26 + #(4,0)2$2 = #, 20 $2
"26 + 16#, 20 $2 = #, 20 $2
15#, 20 $2 = 26
,0 = ((52$15)$#)1*2
Assume # = 0!0024 slugs/ft2
,0 = ((52$15)$0!0024)1*2
= 38 ft/s
] = , I = 38× (0$4)(!5$12)2
= !052 cfs
= 3!11 cfm
One could use a vacuum cleaner (one that you can hook the hose to the dischargeend) to provide the air source for such an atomizer.
392
PROBLEM 5.78
Situation: A suction device based on a venturi is described in the problem statement.Suction cup is 1 m below surface and venturi 1 m above. Throat area id 1/4 of exitarea and exit area is 0.001 m2! Cup area is 0.1 m2 and water temperature is 15oC.
Find: (a) Velocity of water at exit for maximum lift.(b) Discharge.(c) Maximum load supportable by suction cup.
Properties: From Table A.5 %@(15!) = 1' 700 Pa!From Table A.5 # = 999 kg/m3!
APPROACH
Apply the Bernoulli equation and the continuity principle.
ANALYSIS
Venturi exit area, IG'= 10"3 m2' Venturi throat area, I5 = (1$4)IG' Suction cuparea, I& = 0!1 m2
%atm = 100 kPa
&water = 15! C
Bernoulli equation for the Venturi from the throat to exit with the pressure at thethroat equal to the vapor pressure of the water. This will establish the maximumlift condition. Cavitation would prevent any lower pressure from developing at thethroat.
%@$( + ,25 $2) + R5 = %G$( + ,
2Gmax$2) + RG (1)
Continuity principle
,5I5 = ,GIG
,5 = ,G(IG$I5) (2)
,5 = 4,G
Then Eq. (1) can be written as
1' 700$( + (4,Gmax)2$2) = 100' 000$( + , 2Gmax$2)
,Gmax = ((1$15)(2)$()(98' 300))1*2
= ((1$15)(2$#)(98' 300))1*2
,Gmax = 3!62 m/s
]max = ,GIG
= (3!62 m/s)(10"3m2)
]max = 0!00362 m3/s
393
Find pressure in the suction cup at the level of the suction cup.
%5 + (!M = %suction
%suction = 1' 700 Pa+ 9,800× 2= 21' 300 Pa
But the pressure in the water surrounding the suction cup will be %atm + ( × 1 =(100 + 9!80) kPa, or
%water " %suction = (109' 800" 21' 300) Pa= 88' 500 Pa
Thus the maximum lift will be:
Liftmax = !%I& = (%water " %suction)I&= (88' 500 N/m2)(0!1 m2)
Liftmax = 8' 850 N
394
PROBLEM 5.79
Situation: A hovercraft is supported by air pressure.
Find: Air ow rate necessary to support the hovercraft.
APPROACH
Apply the Bernoulli equation.
ANALYSIS
The pressure di!erential necessary to support the hovercraft is
!%I = .P
!% = 2000 lbf/(15× 7) ft2
= 19!05 psfg
Bernoulli equation applied between the ow under the skirt (1) and chamber underthe hovercraft (2). Assume atmospheric pressure where ow exits under skirt. Alsoassume the air density corresponds to standard conditions.
%1 + #, 212
= %2 + #, 222
#, 212
= %2 " %1
,1 =
s2(%2 " %1)
#
=
s2× 19!05 psf
0!00233 slugs/ft3
= 127!9 ft/s
The discharge is
] = , I
= 127!9 ft/s× 44 ft× 0!25 ft= 1407 cfs
Q=84,400 cfm
395
PROBLEM 5.80
Situation: Water forced out of a cylinder by a piston travelling at 5 ft/s. Cylinderdiameter is 4 in and throat is 2 in.
Find: Force required to drive piston.
APPROACH
Apply the Bernoulli equation and the continuity principle.
ANALYSIS
Continuity principle
,1I1 = ,2I2
,2 = ,1(1$A)2 = 5× (4$2)2 = 20 ft/s
Bernoulli equation
%1$( + ,21 $2) = , 22 $2)
%1 =#
2(, 22 " ,
21 )
= 1!94× (202 " 520= 364 psf
Then
Hpiston = %1I1 = 364× (0$4)× (4$12)2
F=31.7 lbf
396
PROBLEM 5.81
Situation: A jet of water owing from a 0.5 ft diameter nozzle with discharge of 20cfs.
Find: Gage pressure in pipe.
APPROACH
Apply the Bernoulli equation.
ANALYSIS
Bernoulli equation
%1$( + ,21 $2) + R1 = %V$( + ,
2V $2) + RV
where 1 and d refer to conditions in pipe and jet, respectively
,1 = ]$I1
= 20$((0$4)× 1!02) = 25!5 ft/s,VIV = ,1I1;,V = ,1I1$IV
,V = 25!5× 4 = 102 ft/s
Also R1 = RV and %V = 0! Then
%1$( = (, 2V " ,21 )2)
%1 = ((, 2V " ,21 )$2)
= 62!4(1022 " 25!52)$64!4= 9' 451 psfg
%1 = 65!6 psig
397
PROBLEM 5.82
Situation: Airow past a sphere is described in problem 4.19 with \! = 30 m/s and# = 1!2 kg/m3.
Find: Pressure in the air at E = 3!' 1!13! and 23!!
APPROACH
Apply the Bernoulli equation.
ANALYSIS
Bernoulli equation
%0 + #,20 $2 = %$ + #,
2$ $2
where %0 = 0 gage. Then
%$ = (#$2)(, 20 " ,2$ )
,$ = @ = \0(1" 330$E3)
,$=K0 = \0(1" 1) = 0,$=K0 = \0(1" 1$1!13) = 7!46 m/s,$=2K0 = \0(1" 1$23) = 26!25 m/s
Finally
%$=K0 = (1!2$2)(303 " 0) = 540 Pa, gage
%$=141K0 = (1!2$2)(302 " 7!462) = 507 Pa, gage
%$=2K0 = (1!2$2)(302 " 26!252) = 127 Pa, gage
398
PROBLEM 5.83
Situation: An elbow meter is described in the problem statement where velocity variesas , = <$3.
Find: (a) Develop an equation for the discharge.(b) Evaluate the coe"cient b(31$32)!
ANALYSIS
, = <$3
] =
Z, AI =
Z, 2A3 = 2
Z(<$3)A3 = <2LQ(32$31) (1)
!% = (1$2)#(, 21 " ,22 )
!% = (1$2)#((<2$321)" (<2$322)) = (<
2#$2)((322)" (321))$(3
21322) (2)
Eliminate < between Eqs. (1) and (2) yielding:
(2!%$#) = ((]2)$(22(LQ(3231))2))(322 " 3
21)$(3
21322)
I1 = 2(32 " 31)! 2!%$# = (]2$I21)(32 " 31)
2(322 " 321)$(3
21322(LQ(32$31))
2)
] = I1p2!%$#(3132LQ(32$31))$((32 " 31)(322 " 3
21)045)
] = I1p2!%$#((32$31)LQ(32$31))$((32$31 " 1)((322$321)" 1)045)
For 32$31 = 1!5 the b(32$31) is evaluated
b(32$31) = 1!5LQ1!5$(0!5× 1!25045)
b(32$31) = 1!088
399
PROBLEM 5.84
Situation: A 1 ft diameter sphere moves at 10 ft below surface in water at 50oF.
Find: Speed at which cavitation occurs.
APPROACH
Apply the Bernoulli equation between the freestream and the maximum width.
ANALYSIS
Let %! be the pressure on the streamline upstream of the sphere. The minimumpressure will occur at the maximum width of the sphere where the velocity is 1.5times the free stream velocity.Bernoulli equation
%! +1
2#, 2! + (M! = %+
1
2#(1!5,!)
2 + ((M! + 0!5)
Solving for the pressure % gives
% = %! " 0!625#, 2! " 0!5(
The pressure at a depth of 10 ft is 624 lbf/ft2! The density of water is 1.94 slugs/ft3
and the specic weight is 62.4 lbf/ft3! At a temperature of 50!F, the vapor pressureis 0.178 psia or 25.6 psfa. Substituting into the above equation
25!6 psfa = 624 psfa" 0!625× 1!94× , 2! " 0!5× 62!4567!2 = 1!21, 2!
Solving for ,! gives
,! = 21!65 ft/s
400
PROBLEM 5.85
Situation: A hydrofoil is tested in water at 10oC. Minimum pressure on foil is 70 kPaabs when submerged 1.8 m and moving at 8 m/s.
Find: Speed that cavitation occurs.
Assumptions: %atm = 101 kPa abs; %vapor = 1' 230 Pa abs.
APPROACH
Consider a point ahead of the foil (at same depth as the foil) and the point of minimumpressure on the foil, and apply the pressure coe"cient denition between these twopoints.
ANALYSIS
Pressure coe"cient-, = (%min " %0)$(#, 20 $2)
where
%0 = %atm + 1!8( = 101' 000 + 1!8× 9' 810 = 118' 658 Pa abs.%min = 70' 000 Pa abs; ,0 = 8 m/s
Then-, = (70' 000" 118' 658)$(500× 82) = "1!521
Now use -, = "1!521 (constant) for evaluating , for cavitation where %min is now%vapor:
"1!521 = (1' 230" 118' 658)$((1' 000$2), 20 )
,0 = 12!4 m/s
401
PROBLEM 5.86
Situation: A hydrofoil is tested in water at 10oC. Minimum pressure on foil is 70 kPaabs when submerged 1.8 m and moving at 8 m/s.
Find: Speed that cavitation begins when depth is 3 m.
APPROACH
Same solution procedure applies as in Prob. 5.85.
ANALYSIS
From the solution to Prob. 5.85, we have the same -,' but %0 = 101' 000 + 3( =130' 430. Then:
"1!521 = (1' 230" 130' 430)$((1' 000$2), 20 )
,0 = 14!37 m/s
402
PROBLEM 5.87
Situation: Hydrofoil is tested in water at 50oF. Minimum pressure on foil is 2.5 psivacuum when submerged 4 ft and moving at 20 ft/s.
Find: Speed that cavitation begins.
APPROACH
Consider a point ahead of the foil (at same depth as the foil) and the point of minimumpressure on the foil, and apply the pressure coe"cient denition between these two
ANALYSIS
%min = "2!5× 144 = "360 psf gage%0 = 4( = 4× 62!4 = 249!6 psf
Then
-, = (%min " %0)$(#, 20 $2) = ("360" 249!6)$((1!94$2)× 202)
-, = "1!571
Now let %min = %vapor = 0!178 psia = "14!52 psia = "2' 091 psfgThen
"1!571 = "(249!6 + 2' 091)$((1!94$2), 20 )
,0 = 39!2 ft/s
403
PROBLEM 5.88
Situation: Hydrofoil is tested in water at 50oF. Minimum pressure on foil is 2.5 psivacuum when submerged 4 ft and moving at 20 ft/s..
Find: Speed that cavitation begins when depth is 10 ft.
APPROACH
Same solution procedure applies as in Prob. 5.87.
ANALYSIS
From solution of Prob. 5.87 we have -, = "1!571 but now %0 = 10( = 624 psf. Then:
"1!571 = "(624 + 2' 091)$((1!94$2), 20 )
,0 = 42!2 ft/s
404
PROBLEM 5.89
Situation: A sphere moving in water at depth where pressure is 18 psia. Maximumvelocity on sphere is 1.5 freestream velocity. Water density is 62.4 lbm/ft3 and tem-perature is 50oF.
Find: Speed at which cavitation occurs.
Properties: From Table A.5 %@(50!) = 0!178 psia.
APPROACH
Apply the Bernoulli equation between a point in the free stream to the 90! positionwhere , = 1!5,0. The free stream velocity is the same as the sphere velocity(reference velocities to sphere).
ANALYSIS
Bernoulli equation
#, 20 $2 + %0 = %+ #(1!5,0)2$2
where %0 = 18 psia
#, 20 (2!25" 1)$2 = (18" 0!178)(144), 20 = 2(17!8)(144)$((1!25)(1!94)) ft2/s2
,0 = 46!0 ft/sec
405
PROBLEM 5.90
Situation: Minimum pressure on cylinder moving 5 m/s horizontally in water at 10oCat depth of 1 m is 80 kPa abs. Atmospheric pressure is 100 kPa.
Find: Velocity at which cavitation occurs.
Properties: From Table A.5 %@(10!-) = 1' 230 Pa.
APPROACH
Apply the denition of pressure coe"cient.
ANALYSIS
Pressure coe"cient
-, = (%" %0)$(#, 20 $2)%0 = 100' 000 + 1× 9' 810 Pa = 109' 810 Pa% = 80' 000 Pa
Thus -, = "2!385
For cavitation to occur % = 1' 230 Pa
"2!385 = (1' 230" 109' 810)$(1' 000, 20 $2)
,0 = 9!54 m/s
406
PROBLEM 5.91
Situation: A velocity eld is dened by @ = , (E3 + E?2) and ; = , (?3 + ?E2).
Find: Is continuity satised?
APPROACH
Apply the continuity principle.
ANALYSIS
Continuity equation
([@$[E) + ([;$[?) + ([Y$[R) = , (3E2 + ?2) + , (3?2 + E2) + 0
6= 0 Continuity is not satised
407
PROBLEM 5.92
Situation: A velocity eld is given as @ = ?$(E2 + ?2)3*2 and ; = "E$(E2 + ?2)3*2.
Find: (a) Check if continuity is satised.(b) Check if ow is rotational or irrotational
ANALYSIS
[@$[E+ [;$[? = "3E?$(E2 + ?2)5*2 + 3E?$(E2 + ?2)5*2
= 0 Continuity is satised
[@$[? " [;$[E = "3?2$(E2 + ?2)5*2 + 1$(E2 + ?2)3*2
= 3E2$(E2 + ?2)5*2 + 1$(E2 + ?2)3*2
6= 0 Flow is not irrotational
408
PROBLEM 5.93
Situation: A @-component of a velocity eld is @ = IE?!
Find: (a) What is a possible ;-component?(b) What must the ;-component be if the ow is irrotational?
ANALYSIS
@ = IE?
[@$[E+ [;$[? = 0
I? + [;$[? = 0
[;$[? = "I?
; = ("1$2)I?2 + -(E)
for irrotationality
[@$[? " [;$[E = 0
IE" [;$[E = 0
[;$[E = IE
; = 1$2IE2 + -(?)
If we let -(?) = "1$2I?2 then the equation will also satisfy continuity.
; = 1$2I(E2 " ?2)
409
PROBLEM 6.1
Situation: A balloon is held stationary by a force H!Data: A = 15 mm, ; = 50 m/s, # = 1!2 kg/m3
Find: Force required to hold balloon stationary: H
Assumptions: Steady ow, constant density.
APPROACH
Apply the momentum principle.
ANALYSIS
Force and momentum diagrams (x-direction terms)
Momentum principle (E-direction)
XH$ =
X
1&
/!;!$ "X
1&
/#;#$
H = /;
= #I;2
= (1!2)
µ0 × 0!0152
4
¶(502)
H = 0!53 8
410
PROBLEM 6.2
Situation: A balloon is held stationary by a force H!Pressure inside the balloon: % = 8 in.-H2O = 1990 PaA = 1 cm, # = 1!2 kg/m3
Find: (a)x-component of force required to hold balloon stationary: H(b)exit velocity: ;
Assumptions: Steady, irrotational, constant density ow.
APPROACH
To nd the exit velocity, apply the Bernoulli equation. To nd the force, apply themomentum principle.
ANALYSIS
Force and momentum diagrams (x-direction terms)
Bernoulli equation applied from inside the balloon to nozzle exit
%$# = ;2$2
; =p2%$# =
p2× 1990$1!2
; = 57!6 m$ s
Momentum principle (E-direction)
XH$ =
X
1&
/!;!$ "X
1&
/#;#$
H = /; = #I;2 = (1!2)¡0 × 0!012$4
¢(57!62)
H = 0!31N
411
PROBLEM 6.3
Situation: A water jet is lling a tank. The tank mass is 5 kg.The tank contains 20 liters of water.Data for the jet: A = 30 mm, ; = 15 m/s, & = 15 !C.
Find: (a) Force on the bottom of the tank: 8(b) Force acting on the stop block: H
Properties: Water—Table A.5: # = 999 kg$m3, ( = 9800N$m3.
Assumptions: Steady ow.
APPROACH
Apply the momentum principle in the x-direction and in the y-direction.
ANALYSIS
Force and momentum diagrams
Momentum principle (E-direction)
XH$ =
X
1&
/!;!$ "X
1&
/#;#$
H = "(" /; cos 70!)= #I;2 cos 70!
Calculations
#I;2 = (999)
µ0 × 0!032
4
¶(152)
= 158!9 N
H = (158!9 N) (cos 70!)
= 54!3N
H = 54!3N acting to right
412
?-directionX
H3 =X
1&
/!;!3 "X
1&
/#;#3
8 ". = "(" /; sin 70!)8 = . + #I;2 sin 70!
Calculations:
. = .tank +.water
= (5) (9!81) + (0!02)(9800)
= 245!1 N
8 = . + #I;2 sin 70!
= (245!1 N) + (158!9 N) sin 70!
8 = 149 8 acting upward
413
PROBLEM 6.4
Situation: Water jet is lling a tank. Friction acts on the bottom of the tank. Tankmass is 25 lbm; tank contains 5 gallons of water.Jet: A = 2 in., ; = 50 ft/s, & = 70 !F.
Find: Minimum coe"cient of friction (7) so force on stop block is zero.
Assumptions: Steady ow, constant density, steady and irrotational ow.
APPROACH
Apply the momentum principle in the x- and y-directions.
ANALYSIS
Force and momentum diagrams
Momentum principle (?-direction)
XH3 =
X
1&
/!;!3 "X
1&
/#;#3
8 ". = "(" /; sin 70!)8 = . + #I;2 sin 70!
Momentum principle (E-direction)
78 = "(" /; cos 70!) = #I;2 cos 70!
7 =(#I;2 cos 70!)
8
414
Calculations
#I;2 = (1!94)¡0 × (1$12)2
¢(502)
= 105!8 lbf
.620 = (V–
= (62!37)(5)$(7!481)
= 41!75 lbf
. = (41!75 + 25) lbf
= 66!7 lbf
8 = 66!7 + 105!8× sin 70! =166!2 lbf
7 =105!8× cos 70!
166!2
7 = 0!22
415
PROBLEM 6.5
Situation: A design contest features a submarine powered by a water jet.Speed of the sub is ,sub = 1!5m$ s.Inlet diameter is 11 = 25mm! Nozzle diameter is 12 = 5mm!Hydrodynamic drag force (H9) can be calculated using
H9 = -9
µ#, 2sub2
¶I,
Coe"cient of drag is -9 = 0!3! Projected area is I, = 0!28m2!
Find: Speed of the uid jet (,jet)!
Properties: Water—Table A.5: # = 999 kg$m3.
Assumptions: Assume steady ow so that the accumulation of momentum term iszero.
APPROACH
The speed of the uid jet can be found from the momentum principle because thedrag force will balance with the net rate of momentum outow.
ANALYSIS
Momentum equation. Select a control volume that surrounds the sub. Select areference frame located on the submarine. Let section 1 be the outlet (water jet)and section 2 be the inlet. The momentum equation is
XF =
X
1&
/!v! "X
1&
/#v#
HDrag = /2;2 " /1;1$
By continuity, /1 = /2 = #Ijet,jet! The outlet velocity is ;2 = ,jet! The x-component of the inlet velocity is ;1$ = ,sub! The momentum equation simpliesto
416
HDrag = #Ijet,jet(,jet " ,sub)
The drag force is
HDrag = -9
µ#, 2sub2
¶I,
= 0!3
Ã(999 kg$m3) (1!5m$ s)2
2
!¡0!28m2
¢
= 94!4N
The momentum equation becomes
HDrag = #Ijet,jet [,jet " ,sub]94!4N =
¡999 kg$m3
¢ ¡1!96× 10"5m2
¢,jet [,jet " (1!5m$ s)]
Solving for the jet speed gives,jet = 70!2m$ s
COMMENTS
1. The jet speed (70.2 m/s) is above 150 mph. This present a safety issue. Also,this would require a pump that can produce a large pressure rise.
2. It is recommended that the design be modied to produce a lower jet velocity.One way to accomplish this goal is to increase the diameter of the jet.
417
PROBLEM 6.6
Situation: Horizontal round jet strikes a plate.Water at 70!F' # = 1!94 slug/ft3, ] = 2 cfs.Horizontal component of force to hold plate stationary: H$ = 200 lbf
Find: Speed of water jet: ;1
APPROACH
Apply the momentum principle to a control volume surrounding the plate.
ANALYSIS
Force and momentum diagrams
Momentum principle (E-direction)
XH$ = " /;1$H$ = "(" /;1) = #];1
;1 =H$#]
=200
1!94× 2
;1 = 51!5 ft$ s
418
PROBLEM 6.7
Situation: Horizontal round jet strikes a plate.Water at 70 !F' # = 1!94 slug/ft3!Pressure at A is %= = 25 psig.Horizontal component of force to hold plate stationary: H$ = 500 lbf
Find: Diameter of jet: A
APPROACH
Apply the Bernoulli equation, then the momentum principle.
ANALYSIS
Force and momentum diagrams
Bernoulli equation applied from inside of tank to nozzle exit
%=$# = ;21$2
;1 =
r2%=#
=
r2× 25× 144
1!94= 60!92 ft/s
Momentum principle (E-direction)
419
XH$ = " /;1$H$ = "(" /;1) = #I;21
I =H$#;21
=500
1!94× 60!922
I = 0!0694 ft2
A =p4I$0
=p4× 0!0694$0
A = 0!30 ft
420
PROBLEM 6.8
Situation: An engineer is designing a toy to create a jet of water.Force H1 is the force needed to move the piston.Force H2 is the force to hold the handle stationary.Cylinder diameter is 1 = 80mm! Nozzle diameter is A = 15mm!Piston speed is ,piston = 300mm$ s!
Find: (a) Which force (H1 versus H2) is larger? Explain your answer using conceptsof the momentum principle.(b) Calculate H1!(c) Calculate H2!
Assumptions: 1.) Neglect friction between the piston and the wall. (2.) Assume theBernoulli equation applies (neglect viscous e!ects; neglect unsteady ow e!ects).
Properties: Table A.5 (water at 20 !C): # = 998 kg$m3!
APPROACH
To nd the larger force, recognize that the net force must be in the direction of accel-eration. To solve the problem, apply the momentum equation, continuity equation,equilibrium equation, and the Bernoulli equation.
ANALYSIS
Finding the larger force (H1 versus H2)! Since the uid is accelerating to the rightthe net force must act to the right. Thus, H1 is larger than H2. This can also beseen by application of the momentum equation.
Momentum equation (E-direction) applied to a control volume surrounding the toy.
XH$ = /;out
H1 " H2 = /;out
H1 " H2 = #
µ0A2
4
¶, 2out (1)
Notice that Eq. (1) shows that H1 F H2.
421
Continuity equation applied to a control volume situated inside the toy.
]in = ]outµ012
4
¶,piston =
µ0A2
4
¶,out
,out = ,piston12
A2
= (0!3m$ s)
µ80mm
15mm
¶2
,out = 8!533m$ s
Bernoulli equation applied from inside the toy to the nozzle exit plane.
%inside +#, 2piston2
=#, 2out2
%inside =#¡, 2out " , 2piston
¢
2
=(998 kg$m3)
¡(8!533m$ s)2 " (0!3m$ s)2
¢
2= 36!29 kPa
Equilibrium applied to the piston (the applied force H1 balances the pressure force).
H1 = %inside
µ012
4
¶
= (36290Pa)
Ã0 (0!08m)2
4
!
H1 = 182N
Momentum principle (Eq. 1)
H2 = H1 " #µ0A2
4
¶, 2out
= 182N"¡998 kg$m3
¢Ã0 (0!015m)2
4
!(8!533m$ s)2
H2 = 169N
COMMENTS
1. The force H1 is only slightly larger than H2.
2. The forces (H1 and H2) are each about 40 lbf. This magnitude of force may betoo large for users of a toy. Or, this magnitude of force may lead to materialfailure (it breaks!). It is recommended that the specications for this productbe modied.
422
PROBLEM 6.9
Situation: Water jet from a re hose on a boat.Diameter of jet is A = 3 in., speed of jet is , = 70 mph = 102.7 ft/s.
Find: Tension in cable: &
Properties: Table A.5 (water at 50 !F): # = 1!94 slug$ ft3!
APPROACH
Apply the momentum principle.
ANALYSIS
Force and momentum diagrams
Flow rate
/ = #I,
=¡1!94 slug$ ft3
¢ ¡0 × (1!5$12 ft)2
¢(102!7 ft$ s)
= 9!78 slug$ s
Momentum principle (E-direction)
XH = / (;!)$
& = /, cos 60!
& = (9!78 slug$ s)(102!7 ft$ s) cos 60!
= 502! 2 lbf
& = 502 lbf
423
PROBLEM 6.10
Situation: Water jet (5 !C) from a re hose on a boat with velocity, ; = 50 m/s, anddensity, # = 1000 kg/m3!Allowable load on cable: & = 5!0 kN.
Find: (a) Mass ow rate of jet: /(b)Diameter of jet: A
APPROACH
Apply the momentum principle to nd the mass ow rate. Then, calculate diameterusing the ow rate equation.
ANALYSIS
Force and momentum diagrams
Momentum principle (E-direction)
XH = / (;!)$
& = /; cos 60!
/ = &$ (; cos 60!) = 5000$(50× cos 60!)
/ = 200 kg$ s
Flow rate
/ = #I; = #0A2;$4
A =
s4 /
#0;
=
r4× 200
1000× 0 × 50= 7! 136× 10"2m
A = 7!14 cm
424
PROBLEM 6.11
Situation: Water (60 !F) ows through a nozzle.A1 = 3 in, A2 = 1 in., %1 = 2000 psfg, %2 = 0 psfg
Find: (a) Speed at nozzle exit: ;2(b) Force to hold nozzle stationary: H
Assumptions: Neglect weight, steady ow.
APPROACH
Apply the continuity principle, then the Bernoulli equation, and nally the momen-tum principle.
ANALYSIS
Force and momentum diagrams
Continuity principle
I1;1 = I2;2
;1 = ;2
µA2A1
¶2(1)
Bernoulli equation applied from 1 to 2
%1#+;212=;222
(2)
Combining Eqs. (1) and (2)
%1 = #
µ;222
¶Ã1"
µA2A1
¶4!
2000 = 1!94×µ;222
¶×
Ã1"
µ1
3
¶4!
;2 = 45!69 ft/s
From Eq. (1)
;1 = ;2
µA2A1
¶2
= 45!69×µ1
3
¶2
= 5!077 ft/s
425
Flow rate
/1 = /2 = /
= (#I;)2
= 1!94×
Ã0
4×µ1!0
12
¶2!× 45!69
= 0!4835 slug/s
Momentum principle (E-direction)
XH$ = / [(;!)$ " (;#)$]
H + %1I1 = / (;2 " ;1)H = "%1I1 + / (;2 " ;1)
H = "(2000 lbf$ ft2)×
Ã0
4×µ3
12
¶2!ft2
+(0!4835 slug$ s)× (45!69" 5!077) ft$ s= "78!5 lbf
Force on nozzle = 78.5 lbf to the left
426
PROBLEM 6.12
Situation: Water (15 !C) ows through a nozzle, # = 999 kg/m3!A1 = 10 cm., A2 = 2 cm., ;2 = 25 m/s.
Find: (a)Pressure at inlet: %1(b)Force to hold nozzle stationary: H
Assumptions: Neglect weight, steady ow, %2 = 0 kPa-gage.
APPROACH
Apply the continuity principle, then the Bernoulli equation, and nally the momen-tum principle.
ANALYSIS
Force and momentum diagrams
Continuity principle
I1;1 = I2;2
;1 = ;2 (A2$A1)2
= 25× (2$10)2
= 1!0 m/s
/1 = /2
= (#I;)2
= 999×µ0 × 0!022
4
¶× 25
= 7!85 kg/s
Bernoulli equation applied from 1 to 2
%1$#+ ;21$2 = ;22$2
%1 =³#2
´ ¡;22 " ;
21
¢
=
µ999
2
¶(252 " 12)
= 3! 117× 105 Pa
%1 = 312 kPa
427
Momentum principle (E-direction)
XH$ = / [(;!)$ " (;#)$]
H + %1I1 = / (;2 " ;1)H = "%1I1 + / (;2 " ;1)
H = "(311!7× 103)µ0 × 0!12
4
¶+ (7!85) (25" 1)
= "2259! 7N
Force on nozzle = 2.26 kN to the left
428
PROBLEM 6.13 The problem involves writing a program for the ow in a nozzleand applying it to problems 6.12 and 6.14. No solution is provided.
429
PROBLEM 6.14
Situation:Pressurized air drives a water jet out of a tank. The thrust of the water jet reducesthe tension in a supporting cable.. = 200N (water plus the container). Tension in cable: & = 10N!Nozzle diameter (A = 12mm) ! 4 = 425mm.
Find: The pressure in the air that is situated above the water.
Assumptions: Assume that the Bernoulli equation can be applied (i.e. assume irro-tational and steady ow).
APPROACH
Apply the momentum equation to nd the exit velocity. Then, apply the Bernoulliequation to nd the pressure in the air.
ANALYSIS
Section area of jet
I2 =0A2
4
=0 (0!012m)2
4= 1! 131 × 10"4m2
Momentum equation (cv surrounding the tank; section 2 at the nozzle)
XF = /!v!
"& +. = /;2
("10 + 200) N = #I2;22
430
Solve for exit speed (;2)
190N =¡999 kg$m3
¢ ¡1!131× 10"4m2
¢;22
;2 = 41!01m$ s
Bernoulli equation (location 1 is on the water surface, location 2 is at the water jet).
%air +#;212+ #)R1 = %2 +
#;222+ #)R2
Let ;1 % 0' %2 = 0 gage and !R = 0!425m.
%air =#;222" #)!R
=(999 kg$m3) (41!01m$ s)2
2"¡999 kg$m3
¢(9!81m$ s2) (0!425m)
= (835' 900Pa)
µ1!0 atm
101!3 kPa
¶
%air = 8!25 atm
431
PROBLEM 6.15
Situation: Free water jet from upper tank to lower tank, lower tank supported byscales A and B.] = 2 cfs, A1 = 4 in., M = 1 ft, 4 = 9 ftWeight of tank: .- = 300 lbf, surface area of lower tank: 4 ft2
Find: (a) Force on scale A: H=(b) Force on scale B: H>
Properties: Water at 60 !F: # = 1!94 slug/ft3' ( = 62!37 lbf/ft3!
APPROACH
Apply the momentum principle.
ANALYSIS
Force and momentum diagrams
Flow rate
/ = #]
= 1!94× 2!0= 3!88 slug/s
;1 =]
I1=4]
012
=4× 2!0
0 × (4$12)2
= 22!9 ft/s
Projectile motion equations
432
;2$ = ;1 = 22!9 ft/s
;23 =p2)4
=&2× 32!2× 9
= 24!1 ft/s
Momentum principle (E-direction)
XH$ = / [(;!)$ " (;#)$]
"H> = " / (;2$)"H> = "3!88× 22!9
H> = 88!9 lbf
Momentum principle (?-direction)
XH3 = /
h(;!)3 " (;#)3
i
H= ".62B ".- = " / (;23)H= = .62B +.- " / (;23)
H= = (62!37× 4× 1) + 300" (3!88× ("24!1))
H= = 643!0 lbf
433
PROBLEM 6.16
Situation: Gravel (( = 120 lbf/ft3) ows into a barge that is secured with a hawser.] = 50 yd3$min = 22.5 ft3/s, ; = 10 ft/s
Find: Tension in hawser: &
Assumptions: Steady ow.
APPROACH
Apply the momentum principle.
ANALYSIS
Force and momentum diagrams
Momentum principle (E-direction)
XH$ = / (;!)$ " / (;#)$
"& = " /(; cos 20) = "(($))](; cos 20)& = (120$32!2)× 22!5× 10× cos(20) = 788 lbf
& = 788 lbf
434
PROBLEM 6.17
Situation: A xed vane in the horizontal plane; oil (6 = 0!9).;1 = 18 m/s, ;2 = 17 m/s, ] = 0!15 m3/s
Find: Components of force to hold vane stationary: H$' H3
APPROACH
Apply the momentum principle.
ANALYSIS
Force and momentum diagrams
Mass ow rate
/ = #]
= 0!9× 1000× 0!15= 135 kg/s
Momentum principle (E-direction)
XH$ = / (;!)$ " / (;#)$
H$ = /(";2 cos 30)" /;1
H$ = "135(17 cos 30 + 18)
H$ = "4!42 kN (acts to the left)
Momentum principle (?-direction)
435
XH3 = / (;!)3 " / (;#)3
H3 = / (";2 sin 30)= 135 ("17 sin 30)= "1!15 kN
H3 = "1!15 kN (acts downward)
436
PROBLEM 6.18
Situation: A xed vane in the horizontal plane; oil (6 = 0!9).;1 = 90 ft/s, ;2 = 85 ft/s, ] = 2!0 cfs
Find: Components of force to hold vane stationary: H$' H3
APPROACH
Apply the momentum principle.
ANALYSIS
Force and momentum diagrams
Mass ow rate
/ = #] = 0!9× 1!94× 2!0 = 3!49 slug/s
Momentum principle (E-direction)
XH$ = / (;!)$ " / (;#)$
H$ = /(";2 cos 30)" /;1
H$ = "3!49(85 cos 30 + 90)
H$=-571 lbf (acts to the left)
?-direction
XH3 = / (;!)3 " / (;#)3
H3 = / (";2 sin 30) = 3!49 ("85 sin 30) = "148 lbf
H3 = "148 lbf (acts downward)
437
PROBLEM 6.19
Situation: A horizontal, two-dimensional water jet deected by a xed vane, # = 1!94slug/ft3!;1 = 40 ft/s, width of jets: Y2 = 0!2 ft, Y3 = 0!1 ft.
Find: Components of force, per foot of width, to hold the vane stationary: H$' H3
Assumptions: As the jet ows over the vane, (a) neglect elevation changes and (b)neglect viscous e!ects.
APPROACH
Apply the Bernoulli equation, the continuity principle, and nally the momentumprinciple.
ANALYSIS
Force and momentum diagrams
Bernoulli equation
;1 = ;2 = ;3 = ; = 40 ft/s
Continuity principle
Y1;1 = Y2;2 + Y3;3
Y1 = Y2 + Y3 = (0!2 + 0!1) = 0!3 ft
Momentum principle (E-direction)
XH$ =
X/! (;!)$ " /# (;#)$
"H$ = /2; cos 60 + /3("; cos 30)" /1;
H$ = #;2("I2 cos 60 +I3 cos 30 +I1)H$ = 1!94× 402 × ("0!2 cos 60 + 0!1 cos 30 + 0!3)
H$ = 890 lbf/ft (acts to the left)
Momentum principle (?-direction)
438
XH3 =
X/! (;!)3
H3 = /2; sin 60 + /3("; sin 30)= #;2(I2 sin 60"I3 sin 30)= 1!94× 402 × (0!2 sin 60" 0!1 sin 30)
H3 = 382 lbf/ft (acts upward)
439
PROBLEM 6.20
Situation: A water jet is deected by a xed vane, / = 25 lbm/s = 0.776 slug/s.;1 = 20 ft/s
Find: Force of the water on the vane: F
APPROACH
Apply the Bernoulli equation, and then the momentum principle.
ANALYSIS
Force and momentum diagrams
Bernoulli equation;1 = ;2 = ; = 20 ft/s
Momentum principle (E-direction)
XH$ = /! (;!)$ " /# (;#)$
"H$ = /; cos 30" /;
H$ = /;(1" cos 30) = 0!776× 20× (1" cos 30)H$ = 2!08 lbf to the left
?-directionX
H3 = /! (;!)3
"H3 = /("; cos 60) = "0!776× 20× sin 30H3 = 7!76 lbf downward
Since the forces acting on the vane represent a state of equilibrium, the force of wateron the vane is equal in magnitude & opposite in direction.
F = "H$i"H3j
= (2!08 lbf)i+(7!76 lbf)j
440
PROBLEM 6.21
Situation: A water jet strikes a block and the block is held in place by friction—however, we do not know if the frictional force is large enough to prevent the blockfrom sliding.;1 = 10 m/s, / = 1 kg/s, 7 = 0!1' mass of block: / = 1 kg
Find:(a) Will the block slip?(b) Force of the water jet on the block: F
Assumptions:1.) Neglect weight of water.2.) As the jet passes over the block (a) neglect elevation changes and (b) neglectviscous forces.
APPROACH
Apply the Bernoulli equation, then the momentum principle.
ANALYSIS
Force and momentum diagrams
Bernoulli equation;1 = ;2 = ; = 10 m/s
Momentum principle (E-direction)
XH$ = /! (;!)$ " /# (;#)$
"H( = /; cos 30" /;
H( = /;(1" cos 30)= 1!0× 10× (1" cos 30)
H( = 1!34 N
441
?-directionX
H3 = /! (;!)3
8 ". = /(; sin 30)
8 = /) + /(; sin 30)
= 1!0× 9!81 + 1!0× 10× sin 30= 14!81 N
Analyze friction:
• H( (required to prevent block from slipping) = 1!34 N
• H( (maximum possible value) = 78 = 0!1× 14!81 = 1!48 N
block will not slip
Equilibrium of forces acting on block gives
F = (Force of the water jet on the block)
= "(Force needed to hold the block stationary)= "H( i+ (. "8)j
So
F =(1!34N) i+("5!00N) j
442
PROBLEM 6.22
Situation: A water jet strikes a block and the block is held in place by friction,7 = 0!1!/ = 1 kg/s, mass of block: / = 1 kg
Find: Maximum velocity (;) such that the block will not slip.
Assumptions: Neglect weight of water.
APPROACH
Apply the Bernoulli equation, then the momentum principle.
ANALYSIS
Force and momentum diagrams
Bernoulli equation;1 = ;2 = ;
Momentum principle (E-direction)X
H$ =X
1&
/!;!$ "X
1&
/#;#$
"78 = /; cos 30" /;
8 = /; (1" cos 30) $7
?-directionX
H3 =X
1&
/!;!3 "X
1&
/#;#3
8 ". = /(; sin 30)
8 = /) + /(; sin 30)
Combine previous two equations
/; (1" cos 30) $7 = /) + /(; sin 30)
; = /)$ [ / (1$7" cos 30$7" sin 30)]; = 1× 9!81$ [1× (1$0!1" cos 30$0!1" sin 30)]
; = 11!7m$ s
443
PROBLEM 6.23
Situation: A water jet strikes plate I and a portion of this jet passes through thesharp-edged orice at the center of the plate.; = 30 m/s, 1 = 5 cm, A = 2 cm
Find: Force required to hold plate stationary: H
Properties: # = 999 kg/m3
Assumptions: Neglect gravity.
APPROACH
Apply the momentum principle.
ANALYSIS
Force and momentum diagrams (only x-direction vectors shown)
Momentum principle (E-direction)
XF =
X
1&
/!v! "X
1&
/#v#
"H = /2; " /1;
H = #I1;2 " #I2;2
= #;2³04
´(12 " A2)
= 999× 302 ×0
4× (0!052 " 0!022)
H=1.48 kN (to the left)
444
PROBLEM 6.24
Situation: 2D liquid jet strikes a horizontal surface.;1 = ;2 = ;3 = ;
Find: Derive formulas for A2 and A3 as a function of >1 and K!
Assumptions: Force associated with shear stress is negligible; let the width of the jetin the z-direction = w.
APPROACH
Apply the continuity principle, then the momentum principle.Continuity principle
/1 = /2 + /3
#Y>1; = #YA2; + #YA3;
>1 = A2 + A3
Force and momentum diagrams
Momentum principle (E-direction)
XH$ =
X
1&
/!v! "X
1&
/#v#
0 = ( /3; + /2(";))" /1; cos K
0 =¡#YA3;
2 " #YA2;2¢" #Y>1;2 cos K
0 = A3 " A2 " >1 cos K
Combining x-momentum and continuity principle equations
A3 = A2 + >1 cos K
A3 = >1 " A2A2 = >1(1" cos K)$2
A3 = >1(1 + cos K)$2
445
PROBLEM 6.25
Situation: A 2D liquid jet impinges on a vertical wall.;1 = ;2 = ;
Find: (a) Calculate the force acting on the wall (per unit width of the jet): H$Y(b) Sketch and explain the shape of the liquid surface.
Assumptions: 1.) Steady ow. 2.) Force associated with shear stress is negligible.
APPROACH
Apply the momentum principle.
ANALYSIS
Let w = the width of the jet in the z-direction. Force and momentum diagrams
Momentum principle (E-direction)
XH$ =
X
1&
/!;!$ "X
1&
/#;#$
"H = " /;1 sin 45!
H = #YP;2 sin 45!
The force on that acts on the wall is in the opposite direction to force pictured onthe force diagram, thus
H$Y = #P;2 sin 45! (acting to the right)
446
?-directionX
H3 =X
1&
/!;!3 "X
1&
/#;#3
". = / (";)" / (";) cos 45!
. = /;(1" cos 45!)
COMMENTS
Thus, weight provides the force needed to increase y-momentum ow. This weightis produced by the uid swirling up to form the shape show in the above sketches.
447
PROBLEM 6.26
Situation: A jet engine (ramjet) takes in air, adds fuel, and then exhausts the hotgases produced by combustion.At the inlet: ;1 = 225 m/sAt the exit: #2 = 0!25 kg/m
3 I2 = 0!5 m2
Find: Thrust force produced by the ramjet: &
Assumptions: 1.) Neglect the mass addition due to the fuel (that is, /in = /out =/ = 50 kg/s). 2.) Assume steady ow.
APPROACH
Apply the momentum principle.
ANALYSIS
Force and momentum diagrams
where H is the force required to hold the ramjet stationary.
Calculate exit velocity
/2 = #2I2;2
;2 = /2$(#2I2) = 50$(0!25× 0!5) = 400 m/s
Momentum principle (E-direction)
XH$ =
X
1&
/!;!$ "X
1&
/#;#$
H = /(;2 " ;1) = 50(400" 225)
& = 8!75 kN (to the left)
448
PROBLEM 6.27
Situation: A horizontal channel is described in the problem statement.
Find: Develop an expression for ?1!
APPROACH
Apply the momentum principle.
ANALYSIS
Momentum principle (E-direction) (cs passes through sections 1 and 2)
XH$ = /;2
(%I)1 " (%I)2 = #];2
(D?21($2)" (D?22($2) = #](]$?2D)
?1=p?22 + (2$()?2))× (]$D)2
449
PROBLEM 6.28
Situation: An end section of a pipe has a slot cut in it—additional information isprovided in the problem statement.
Find: (a)How the pressure will change in the pipe from E = 0 to E = 2.(b) Devise a way to solve for the pressure distribution.
Assumptions: Neglect viscous resistance.
APPROACH
Apply the momentum principle and the continuity principle.
ANALYSIS
Obtain the pressure variation along the pipe by applying the momentum equation insteps along the pipe (numerical scheme). The rst step would be for the end segmentof the pipe. Then move up the pipe solving for the pressure change (!%) for eachsegment. Then %end +
P!% would give the pressure at a particular section. The
momentum equation for a general section is developed below.
Momentum principle (E-direction)
"H$ =P1&
/!,!$ "P1&
/#,#$
%1I1 " %2I2 = #]2(]2$I2)" #]1(]1$I1)but I1 = I2 = I so we get
%1 " %2 = (#$I2)(]22 "]21) (1)
As section 1 approaches section 2 in the limit we have the di!erential form
"A% = (#$I2)A]2 = 2(#$I2)]A]
Continuity principle
]1 "]2 = !?p2%$#!E
]1 = ]2 +!?p2%$#AE
450
In the limit at !E$ 0 we have
A] = "!?p2%$#AE
The di!erential equation for pressure becomes
A% = 2(#$I2)A]2 = 2(#$I2)]!?p2%$#AE
Integrating the momentum equation to evaluate ] at location E we have
] = "!?Z $p
2%$#AW
so the equation for pressure distribution is
% |!E0 = (4$I2)!?2Z !E
0
%1*2·Z $
0
%1*2AW
¸AE
where 2 is some distance along the pipe.
COMMENTS
This equation has to be integrated numerically. One can start at the end of the pipewhere the pressure is known (atmospheric pressure). The one can assume a linearpressure prole over the interval !2! An iterative solution would be needed for eachstep to select the slope of the pressure curve (pressure gradient). The pressure willdecrease in the direction of ow.
451
PROBLEM 6.29
Situation: A cone is supported by a vertical jet of water.Weight of the cone is. = 30N! Speed of the water jet as it emerges from the oriceis ,1 = 15m$ s!Jet diameter at the exit of the orice is A1 = 2cm!
Find: Height to which cone will rise: M!
Assumptions: Based on application of the Bernoulli equation, assume that the speedof the uid as it passes by the cone is constant (,2 = ,3) !
APPROACH
Apply the Bernoulli equation and the momentum principle.
ANALYSIS
c.s.
V1
1
2
3
60 o
Bernoulli equation
, 212)+ 0 =
, 222)+ M
, 22 = (15)2 " 2)M, 22 = (15)2 " 2)M = 225" 2× 9!81M, 22 = 225" 19!62M
Momentum principle (?-direction). Select a control volume surrounding the cone.
XH3 = /!;!3 " /#;#3
". = /(;33 " ;2)"30 = 1000× 15× 0 × (0!01)2(,2 sin 30! " ,2)
Solve for the ,2,2 = 12!73 m/s
452
Complete the Bernoulli equation calculation
, 22 = 225" 19!62M(12!73)2 = 225" 19!62M
M = 3!21m
453
PROBLEM 6.30
Situation: A 180! pipe bend (6 in. diameter) carries water.] = 6 cfs % = 20 psi gage
Find: Force needed to hold the bend in place: H$ (the component of force in thedirection parallel to the inlet ow)
APPROACH
Apply the momentum principle.
Assumptions: The weight acts perpendicular to the ow direction; the pressure isconstant throughout the bend.
ANALYSIS
Momentum principle (E-direction)
XH$ =
X
1&
/!;!$ "X
1&
/#;#$
2%I" H$ = "2 /;
Calculations
%I = (20× 144)¡0$4× 0!52
¢= 565!5 lbf
/; = #]2$I = 1!94× 62$(0$4× 0!52) = 355!7 lbfH$ = 2(%I+ /;) = 2× (565!5 + 355!7) lbf
H$=1840 lbf (acting to the left, opposite of inlet ow)
454
PROBLEM 6.31
Situation: Hot gas ows through a return bend–additional details are provided inthe problem statement.
Find: Force required to hold the bend in place: H$
APPROACH
Apply the continuity principle, then the momentum principle.
ANALYSIS
100 ft/s
x
2
1
/ = 1 lbm/s = 0!0311 slugs/s
At section (1):
;1 = 100 ft/s
#1 = 0!02 lbm/ft3 = 0!000621 slugs/ft3
At section (2):#2 = 0!06 lbm/ft
3 = 0!000186 slugs/ft3
Continuity principle
#1;1I1 = #2;2I2
;2 = (#1$#2)(I1$I2);1
;2 = (0!02$0!06)(1$1);1
= 33!33 ft/s
Momentum principle (E-direction)
XH$ =
X
$&
/!;!' "X
1&
/#;#'
= /(;2 " ;1)H$ = 0!0311("33!33" 100)
H$ = "4!147 lbf
455
PROBLEM 6.32
Situation: Fluid (density #, discharge ], and velocity , ) ows through a 180! pipebend–additional details are provided in the problem statement.. Cross sectionalarea of pipe is I.
Find: Magnitude of force required at anges to hold the bend in place.
Assumptions: Gage pressure is same at sections 1 and 2. Neglect gravity.
APPROACH
Apply the momentum principle.
ANALYSIS
Momentum principle (E-direction)
XH$ =
X
1&
/!;!$ "X
1&
/#;#$
%1I1 + %2I2 + H$ = /(;2 " ;1)
thus
H$ = "2%I" 2 /,H$ = "2%I" 2#],
Correct choice is (d)
456
PROBLEM 6.33
Situation: Water ows through a 180! pipe bend–additional details are provided inthe problem statement.
Find: External force required to hold bend in place.
APPROACH
Apply the momentum principle.
ANALYSIS
Flow rate equation
; = ]$I = 20$(0 × 0!5× 0!5) = 25!5 fps
Momentum principle (E-direction)
XH$ =
X
1&
/!;!$ "X
1&
/#;#$
%1I1 + %2I2 + H$ = /(;2 " ;1)
thus
H$ = "2%I" 2 /;= "2(15× 144(0$4× 12) + 1!94× 20× 25!5)= "5' 370 lbf
Momentum principle (?-direction)
XH3 = 0
".bend ".620 + H3 = 0
H3 = 200 + 3× 62!4 = 387!2 lbf
Force requiredF = ("5370i+ 387j) lbf
457
PROBLEM 6.34
Situation: Water ows through a 180! pipe bend–additional details are provided inthe problem statement.
Find: Force that acts on the anges to hold the bend in place.
APPROACH
Apply the continuity and momentum equations.
ANALYSIS
Flow rate
;1 =]
I
=4× 0!3m3$ s0 × (0!2m)2
= 9!549 m/s
Continuity. Place a control volume around the pipe bend. Let section 2 be the exitand section 1 be the inlet
] = I1;1 = I2;2
thus ;1 = ;2
Momentum principle (E-direction). Place a control volume around the pipe bend.Let section 2 be the exit and section 1 be the inlet.
XH$ =
X
1&
/!;!$ "X
1&
/#;#$
2%I+ H$ = #] (";2)" %];1H$ = "2%I" 2#];
Calculations
2%I = (2)(100' 000)(0
4)(0!22)
= 6283N
2#], = (2)(1000)(0!3)(9!55)
= 5730N
H$ = " (2%I+ 2#];)= " (6283N + 5730N)= "12!01 kN
Momentum principle (R-direction). There are no momentum ow terms so the mo-mentum equation simplies to
458
H; = .bend +.water
= 500 + (0!1)(9810)
= 1!481 kN
The force that acts on the anges is
F = ("12!0i+ 0j+1!48k) kN
459
PROBLEM 6.35
Situation: A 90! pipe bend is described in the problem statement.
Find: Force on the upstream ange to hold the bend in place.
APPROACH
Apply the momentum principle.
ANALYSIS
Velocity calculation
; = ]$I = 10$((0$4× 1!02) = 12!73 ft/s
Momentum principle (E-direction)
XH$ =
X
1&
/!;!$ "X
1&
/#;#$
%I+ H$ = #](0" ;)H$ = 1!94× 10(0" 12!73)" 4× 144× 0$4× 12 = "699 lbf
?-direction
H3 = #]("; " 0)H3 = "1!94× 10× 12!73 = "247 lbf
R-directionX
H; = 0
"100" 4× 62!4 + H; = 0H; = +350 lbf
The force isF = ("699i " 247j + 350k) lbf
460
PROBLEM 6.36
Situation: A 900 pipe bend is described in the problem statement.
Find: E"component of force applied to bend to hold it in place: H$
APPROACH
Apply the momentum principle.
ANALYSIS
Velocity calculation
; = ]$I = 10$(0 × 12$4) = 12!73 m/s
Momentum principle (E-direction)
XH$ =
X
1&
/;!$ "X
1&
/;#$
%I+ H$ = #](0" ;)
300' 000× 0 × 0!52 + H$ = 1000× 10× (0" 12!73)H$ = "362' 919 N = -363 kN
461
PROBLEM 6.37
Situation: Water ows through a 30! pipe bend–additional details are provided inthe problem statement.
Find: Vertical component of force exerted by the anchor on the bend: H'
APPROACH
Apply the momentum principle.
ANALYSIS
Velocity calculation
; = ]$I
= 31!4$(0 × 1× 1)= 9!995 ft/sec
Momentum principle (?-direction)
XH3 = #](;23 " ;13)
H' ".water ".bend " %2I2 sin 30! = #](; sin 30! " ; sin 0!)H' = 0 × 1× 1× 4× 62!4 + 300
+8!5× 144× 0 × 1× 1× 0!5+1!94× 31!4× (9!995× 0!5" 0)
H' = 3310 lbf
462
PROBLEM 6.38
Situation: Water ows through a 60! pipe bend and jets out to atmosphere–additionaldetails are provided in the problem statement.
Find: Magnitude and direction of external force components to hold bend in place.
APPROACH
Apply the Bernoulli equation, then the momentum principle.
ANALYSIS
Flow rate equation
;1 = 10$4 = 2!5 m/s
] = I1;1 = 0 × 0!3× 0!3× 2!5 = 0!707 m3$s
Bernoulli equation
%1 = %2 + (#$2)(;22 " ;
21)
= 0 + (1000$2)(10× 10" 2!5× 2!5)= 46' 875 Pa
Momentum principle (E-direction)
H$ + %1I1 = #](";2 cos 60! " ;1)H$ = "46' 875× 0 × 0!3× 0!3 + 1000× 0!707× ("10 cos 60! " 2!5)
= "18' 560 N
?-direction
H3 = #](";2 sin 60! " ;1)H3 = 1000× 0!707× ("10 sin 60! " 0)
= "6123 N
R-direction
H; ".H20 ".bend = 0
H; = (0!25× 9' 810) + (250× 9!81) = 4' 905 N
Net forceF = ("18!6i" 6!12j+ 4!91k) kN
463
PROBLEM 6.39
Situation: Water ows through a nozzle–additional details are provided in the prob-lem statement.
Find: Vertical force applied to the nozzle at the ange: H3
APPROACH
Apply the continuity principle, then the Bernoulli equation, and then the momentumprinciple.
ANALYSIS
Continuity principle
;1I1 = ;2I2
;1 = ;2I2$I1 = 65 ft/s
] = ;2I2 = (130 ft/s)(0!5 ft2)
= 65 cfs
Bernoulli equation
%1$( + ;21$2) + R1 = %2$( + ;
22$2) + R2
%1$( = 0 + (1302$2)) + 2" (652$2))%1 = 62!4(262!4 + 2" 65!6)%1 = 12' 400 lbf/ft2
Momentum principle (?-direction)
%1I1 ".620 ".nozzle + H3 = #](;2 sin 30! " ;1) (1)
Momentum ow terms
#](;2 sin 30! " ;1) = (1!94)(62!5) [(130 sin 30!)" 65]
= 0 lbf
Thus, Eq. (1) becomes
H3 = .620 +.nozzle " %1I1= (1!8× 62!4) + (100)" (12400× 1)= "12' 190 lbf
H3 = 12' 200 lbf (acting downward)
464
PROBLEM 6.40
Situation: Gasoline ows through a 135! pipe bend–additional details are providedin the problem statement.
Find: External force required to hold the bend: H
APPROACH
Apply the momentum principle.
ANALYSIS
1
2
45o
y
x
Flow rate
] = ;I = 15× 0$4× 12
= 11!78 cfs
Momentum principle (E-direction)X
H$ = #](;2$ " ;1$)
%1I1 + %2I2 cos 45! + H$ = #](";2 cos 45! " ;1)
H$ = "%I(1 + cos 45!)" #];(1 + cos 45!)= "(1440)× (0$4× 12)(1 + cos 45!)
"(0!8× 1!94)(11!78)(15)(1 + cos 45!)= "2400 lbf
Momentum principle (?-direction)X
H3 = #](;23 " ;13)
%2I2 sin 45! + H3 = #](";2 sin 45! " 0)
H3 = "%I sin 45! " #];2 sin 45!
H3 = "(1440)(0$4× 12) sin 45! " (0!8× 1!94)(11!78)(15) sin 45!
H3 = "994 lbf
Net forceF = ("2400i" 994j) lbf
465
PROBLEM 6.41
Situation: Gasoline ows through a 135! pipe bend–additional details are providedin the problem statement.
Find: External force required to hold the bend in place: H
APPROACH
Apply the momentum principle.
ANALYSIS
Discharge
] = 8× 0$4× 0!15× 0!15= 0!141 m3/s
Momentum principle (E-direction)
XH$ = /(;2$ " ;1$)
%1I1 + %2I2 cos 45! + H$ = #](";2 cos 45! " ;1)
H$ = "%I(1 + cos 450)" #];(1 + cos 45!)= "(100' 000)(0$4× 0!152)(1 + cos 45!)
"(1000× 0!8)(0!141)(8)(1 + cos 45!)= "4557 N
Momentum principle ?-direction
XH3 = #](;23 " ;13)
%2I2 sin 45! + H3 = "#];2 sin 45!
= "(100' 000)(0$4× 0!152) sin 45!
"(1' 000× 0!8)(0!141)(8) sin 45!
= "1' 888 N
Net forceF = ("4!56i" 1!89j) kN
466
PROBLEM 6.42
Situation: Water ows through a 60! reducing bend–additional details are providedin the problem statement.
Find: Horizontal force required to hold bend in place: H$
APPROACH
Apply the Bernoulli equation, then the momentum principle.
ANALYSIS
Bernoulli equation
;1 = ;2I2$I1
= 50(1$10)
= 5 m/s
%1 + #;21$2 = %2 + #;
22$2
Let %2 = 0, then
%1 = "(1' 000)$2)(52) + (1' 000$2)(502)%1 = 1237!5 kPa
Momentum principle (E-direction)
XH$ = /(;2$ " ;1$)
%1I1 + H$ = #I2;2(;2 cos 60! " ;1)
H$ = "1' 237' 000× 0!001 + 1' 000× 0!0001× 50(50 cos 60! " 5)H$ = 1140 N
467
PROBLEM 6.43
Situation: Water ows through a three dimensional pipe bend–additional details areprovided in the problem statement.
Find: Force that the thrust block exerts on the bend: F
APPROACH
Apply the momentum principle in each coordinate direction (x, y and z). To keeptrack of directions (this is a problem in three dimensions), use unit vectors to representthe velocity and pressure terms.
ANALYSIS
2
V1
V2
p A2 2
p A1 1
1
Flow speed
, =]
I
=4× 16m3$ s0 (1!3m)2
= 12!05m$ s
Inlet velocity vectors (written using direction cosines)
v1 = ,1[(13$L1)j" (10$L1)k]
where L1 =&132 + 102! Thus
v1 = (12!05m$ s) [0!793j" 0!6097k]
Exit velocity vector (written using direction cosines)
v2 = ,2[(13$L2)i+ (19$L2)j" (20$L2)k]
where L2 =&132 + 192 + 202! Then
v2 = (12!05m$ s) [0!426i+ 0!623j" 0!656k]
468
Pressure forces (written using direction cosines)
F,1 = %1I1(0!793j" 0!6097k)F,2 = %2I2("0!426i" 0!623j+ 0!656k)
Weight
W = (.water +.metal)k
= (("3× 9810)" 10000)k= ("39 430N)k
Momentum equation (E-direction)X
H$ = #](;2$ " ;1$)
H$ " 0!426× %2I2 = #][(12!05m$ s) (0!426)" 0]
where
%2I2 = 25' 000× (0$4)× (1!3)2
= 33' 183N
#] = 1000× 16= 16' 000 kg$ s
Thus
H$ = (%2I2) (0!426) + (#]) (12!05m$ s) (0!426)
= (33' 183N) (0!426) + (16' 000 kg$ s) (12!05m$ s) (0!426)
= 96' 270N
Momentum equation (?-direction)X
H3 = #](;23 " ;13)
H3 + %1I1 (0!793)" %2I2 (0!623) = #][0!623,2 " 0!793,1]
where
%1I1 = 20' 000× (0$4)(1!3)2
= 26' 546 N
#][0!623,2 " 0!793,1] = 16' 000 [(0!623) (12!05)" (0!793) (12!05)]= "32' 780N
Thus
H3 = "%1I1 (0!793) + %2I2 (0!623) + #][,2 (0!623)" ,1 (0!793)]= " (26' 546N) (0!793) + (33' 183N) (0!623)" (32' 780N)= "33' 160N
469
Momentum equation (R-direction)
XH; = #](;2; " ;1;)
H; " %1I1 (0!6097) + %2I2(0!656)". = #] [,2 ("0!656)" ,1 ("0!6097)]
Evaluate the momentum ow terms
#] [,2 (0!656)" ,1 ("0!6097)] = 16' 000 [12!05 ("0!656)" 12!05 ("0!6097)]= "8927N
The momentum equation becomes
H; = %1I1 (0!6097)" %2I2(0!656) +. + #] [(,2 (0!656)" ,1 ("0!6097)]H; = (26' 546N) (0!6097)" (33' 183N) (0!656) + (39 430N)" (8927N)
H; = 24' 920N
Net forceF = (96!3i" 33!2j+ 24!9k) kN
470
PROBLEM 6.44
Situation: Water ows through a tee–—additional details are provided in the problemstatement.
Find: Pressure di!erence between sections 1 and 2.
APPROACH
Apply the continuity principle, then the momentum principle.
1 2
3 500 kg/s
ANALYSIS
Continuity principle
/1 + 500 kg/s = /2
/1 = (10 m/s)(0!10 m2)(1000 kg/m3) = 1000 kg/s
/2 = 1000 + 500 = 1500 kg/s
;2 = ( /2)$(#I2) = (1500)$((1000)(0!1)) = 15 m/s
Momentum principle (E-direction)
XH$ = /2;2$ " /1;1$ " /3;3$
%1I1 + %2I2 = /2;2 " /1;1 " 0I(%1 " %2) = (1500)(15)" (1000)(10)%1 " %2 = (22' 500" 10' 000)$0!10
= 125' 000 Pa
= 125 kPa
471
PROBLEM 6.45
Situation: Water ows through a wye–additional details are provided in the problemstatement.
Find: E"component of force to hold wye in place.
APPROACH
Apply the momentum principle.
1 2
330o
x
Flow rate
;1 = ]1$I1 = 20 ft/s
;2 = ]2$I2 = 12 ft/s
]3 = 20" 12 = 8 ft3/s;3 = ]3$I3 = 32 ft/s
Momentum principle (E-direction)
XH$ = /2;2 + /3;3 cos 30
! " /1;1
H$ + %1I1 " %2I2 = (20#)("20) + (12#)(+12) + (32 cos 30!)(#)(8)H$ + (1000)(1)" (900)(1) = "400#+ 144#+ #(8)(32)(0!866)
H$ = "100 + 1!94("34!3)
H$ = "166!5 lbf (acting to the left)
472
PROBLEM 6.46
Situation: Water ow through a horizontal bend and T section–additional detailsare provided in the problem statement.
y
x
1
2
3
/1 = 10 lbm/s
/2 = /3 = 5 lbm/s
I1 = I2 = I3 = 5 in2
%1 = 5 psig
%2 = %3 = 0
Find: Horizontal component of force to hold tting stationary: H$
APPROACH
Apply the momentum principle.
ANALYSIS
Velocity calculations
;1 = /1$#I1
= (10$32!2)$ [(1!94)(5$144)]
= 4!61 ft/s
;2 = /2$#I2
= (5$32!2)$ [(1!94)(5$144)]
= 2!31 ft/s
Momentum principle (E-direction)
XH$ = " /2;2 " /1;1
%1I1 + H$ = " /2;2 " /1;1
H$ = "%1I1 " /2;2 " /1;1
= "(5× 5)" (5$32!2)(2!31)" (10$32!2)(4!61)
H$ = "26!8 lbf
473
PROBLEM 6.47
Situation: Water ows through a horizontal bend and T section–additional detailsare provided in the problem statement.
y
x
1
2
3
;1 = 6 m/s %1 = 4!8 kPa
;2 = ;3 = 3 m/s %2 = %3 = 0
I1 = I2 = I3 = 0!20 m2
Find: Components of force (H$' H3) needed to hold bend stationary.
APPROACH
Apply the momentum principle.
ANALYSIS
Discharge
]1 = I1;1 = 0!2× 6 = 1!2 m3/s]2 = ]3 = I2;2 = 0!2× 3 = 0!6 m3/s
Momentum principle (E-direction)
XH$ = " /2;2 " /1;1
%1I1 + H$ = "#(]2;2 +]1;1)H$ = "%1I1 " #(]2;2 +]1;1)
= "4800× 0!2" 1000(0!6× 3 + 1!2× 6)
H$ = "9!96 kN (acts to the left)
?-directionX
H3 = /3(";3)H3 = "#]3;3 = "1000× 0!6× 3
H3=-1.8 kN (acts downward)
474
PROBLEM 6.48
Situation: Water ows through a horizontal tee–additional details are provided inthe problem statement.
Find: Components of force (H$' H3) needed to hold the tee in place.
APPROACH
Apply the momentum principle.
ANALYSIS
Velocity calculations
,1 =0!25
(0 × 0!075× 0!075)= 14!15 m/s
,2 =0!10
(0 × 0!035× 0!035)= 25!98 m/s
,3 =(0!25" 0!10)
(0 × 0!075× 0!075)= 8!49 m/s
Momentum equation (E-direction)
H$ + %1I1 " %3I3 = /3,3 " /1,1
H$ = "%1I1 + %3I3 + #,3]" #,1]H$ = " (100' 000× 0 × 0!075× 0!075) + (80' 000× 0 × 0!075× 0!075)
+ (1000× 8!49× 0!15)" (1000× 14!15× 0!25)H$ = "2617N
Momentum equation ?-direction
H3 + %3I3 = "#,3]H3 = "#,3]" %3I3H3 = "1000× 25!98× 0!10" 70' 000× 0 × 0!035× 0!035
= "2867 N
Net forceF = ("2!62i" 2!87j) kN
475
PROBLEM 6.49
Situation: Water ows through an unusual nozzle–additional details are provided inthe problem statement.
y
x
Find: Force at the ange to hold the nozzle in place: F
APPROACH
Apply the momentum principle.
APPROACH
Apply the continuity principle, then the Bernoulli equation, and nally the momen-tum principle.
ANALYSIS
Continuity principle
;,I, =X
;VIV
;, = 2× 30× 0!01$0!10= 6!00 m/s
Bernoulli equation%pipe$( + ;
2,$2) = %jet$( + ;
2V$2)
Then
%, = (($2))(;2V " ;2,)
= 500(900" 36)= 432' 000 Pa
Momentum principle (E-direction)
%,I, + H$ = ";,#;,I, + ;V#;VIVH$ = "1000× 62 × 0!10 + 1' 000× 302 × 0!01" 432' 000× 0!1H$ = "37' 800 N
?-direction
H3 = /(";V) = ";V#;VI= "30× 1000× 30× 0!01= "9000 N
476
R-directionX
H; = 0
"200" (V–+ H; = 0
H; = 200 + 9810× 0!1× 0!4= 592 N
Net forceF = ("37!8i" 9!0j+ 0!59k) kN
477
PROBLEM 6.50
Situation: Water ows through a converging nozzle–additional details are providedin the problem statement.
1 2
xv1
v2
Find: Force at the ange to hold the nozzle in place: H
APPROACH
Apply the Bernoulli equation to establish the pressure at section 1, and then applythe momentum principle to nd the force at the ange.
ANALYSIS
Continuity equation (select a control volume that surrounds the nozzle).
]1 = ]2 = ] = 15 ft3$ s
Flow rate equations
;1 =]
I1=4×]012
1
=4×
¡15 ft3$ s
¢
0 (1 ft)2
= 19!099 ft$ s
;2 =]
I2=4×]012
2
=4×
¡15 ft3$ s
¢
0 (9$12 ft)2
= 33! 953 ft$ s
Bernoulli equation
%1 +#;212
= %2 +#;222
%1 = 0 +#(;22 " ;21)
2
=1!94 slug$ ft3(33! 9532 " 19!0992) ft2$ s2
2= 764!4 lbf$ ft2
Momentum principle (E-direction)
%1I1 + H = /;2 " /;1
478
Calculations
%1I1 = (764!4 lbf$ ft2)(0$4)(1 ft)2
= 600!4 lbf
/;2 " /;1 = #] (;2 " ;1)= (1!94 slug$ ft3)(15 ft3$ s) (33! 953" 19!098) ft$ s= 432! 3 lbf
Substituting numerical values into the momentum equation
H = "%1I1 + ( /;2 " /;1)
= "600!4 lbf + 432! 3 lbf= "168! 1 lbf
H = "168 lbf (acts to left)
479
PROBLEM 6.51
Situation: Water ows through a converging nozzle–additional details are providedin the problem statement.
Find: Force at the ange to hold the nozzle in place: H$
APPROACH
Apply the Bernoulli equation, and then the momentum principle.
ANALYSIS
Velocity calculation
;1 = 0!3$(0 × 0!15× 0!15) = 4!244 m/s;2 = 4!244× 9 = 38!196 m/s
Bernoulli equation
%1 = 0 + (1' 000$2)(38!1962 " 4!2442) = 720 kPa
Momentum principle (E-direction)
H$ = "720' 000× 0 × 0!152 + 1' 000× 0!3(38!196" 4!244)
H$ = "40!7 kN (acts to the left)
480
PROBLEM 6.52
Water ows through a nozzle with two openings–additional details are provided inthe problem statement
Find: E-component of force through ange bolts to hold nozzle in place.
APPROACH
Apply the Bernoulli equation, and then the momentum principle.
ANALYSIS
Velocity calculation
;= = ;> = 16× 144$[(0$4)(4× 4 + 4!5× 4!5)]= 80!93 fps
;1 = 16$(0 × 0!5× 0!5)= 20!37 fps
Bernoulli equation
%1 = 0 + (1!94$2)(80!93× 80!93" 20!37× 20!37) = 5951 psf
Momentum principle (E-direction)
H$ = "5' 951× 0 × 0!5× 0!5× sin 30! " 80!93× 1!94× 80!93× 0 × 2×2$144" 20!37× 1!94× 16!0 sin 30!
H$ = "3762 lbf
481
PROBLEM 6.53
Situation: Water ows through a nozzle with two openings–additional details areprovided in the problem statement.
Find: E-component of force through ange bolts to hold nozzle in place: H$
APPROACH
Apply the Bernoulli equation, and then the momentum principle.
ANALYSIS
Velocity calculation
;= = ;> = 0!5$(0 × 0!05× 0!05 + 0 × 0!06× 0!06) = 26!1 m/s;1 = 0!5$(0 × 0!15× 0!15) = 7!07 m/s
Bernoulli equation
%1 = (1' 000$2)(26!12 " 7!072) = 315' 612 Pa
Momentum principle (E-direction)
XH$ = /!;!$ "/#;#$
H$ + %1I1 sin 30 = " /;= " /;# sin 30
H$ = "315' 612× 0 × 0!152 × sin 30! " 26!1× 1' 000× 26!1
×0 × 0!052 " 7!07× 1000× 0!5 sin 30! = "18' 270 N = -18.27 kN
482
PROBLEM 6.54
Situation: Water ows through a nozzle that is bolted onto a pipe–additional detailsare provided in the problem statement.
1 2
Find: Tension load in each bolt: &
APPROACH
Apply the continuity principle, then the Bernoulli equation, and nally the momen-tum principle.
ANALYSIS
Continuity principle;2 = (I1$I2);1 = 4;1
Bernoulli equation
(;21$2)) + (%1$() = (;22$2)) + (%2$()
15(;21$2)) = (200' 000$9810)
;1 = 5!16 m/s
;2 = 20!66 m/s
] = 0!365 m3/s
Momentum principle (E-direction)
XH$ = /!;!$ " /#;#$
Hbolts + %1I1 = #](;2 " ;1)
Thus
Hbolts = "%1I1 + #](;2 " ;1)Hbolts = "200' 000× 0 × 0!152 + 1000× 0!365(20!66" 5!16)
= "8440 N
Force per bolt = 1413 N
483
PROBLEM 6.55
Situation: Water jets out of a two dimensional slot.Flow rate is ] = 5 cfs per ft of slot width. Slot spacing is 4 = 8 in! Jet height is> = 4 in!
Find: (a)Pressure at the gage.(b)Force (per foot of length of slot) of the water acting on the end plates of the slot.
APPROACH
To nd pressure at the centerline of the ow, apply the Bernoulli equation. To ndthe pressure at the gage (higher elevation), apply the hydrostatic equation. To ndthe force required to hold the slot stationary, apply the momentum principle.
ANALYSIS
Continuity. Select a control volume surrounding the nozzle. Locate section 1 acrossthe slot. Locate section 2 across the water jet.
]1 = ]2 = ] =5 ft3$ s
ft
Flow rate equations
,1 =]
I1=
5 ft2$ s
(8$12) ft
= 7!5 ft$ s
,2 =]
I2=
5 ft2$ s
(4$12) ft
= 15! ft$ s
Bernoulli equation
%1 =#
2(, 22 " ,
21 )
=1!94 slug$ ft3
2(152 " 7!52)
ft2
s2
%1 = 163! 69 lbf$ ft2
Hydrostatic equation. Location position 1 at the centerline of the slot. Locateposition 3 at the gage.
%1(+ R1 =
%3(+ R3
163! 69 lbf$ ft2
62!4 lbf$ ft3+ 0 =
%3
62!4 lbf$ ft3+(8$12) ft
2
%3 = 142! 89 psf
484
%3 = 143 lbf$ ft2 = 0!993 lbf$ in2
Momentum principle (E-direction)
XH$ = /,2 " /,1
H$ + %1I1 = #](,2 " ,1)H$ = "%1I1 + #](,2 " ,1) (1)
Calculations
%1I1 =¡163! 69 lbf$ ft2
¢(8$12 ft)
= 109! 13 lbf$ ft (a)
#](,2 " ,1) =¡1!94 slug$ ft3
¢ ¡5 ft2$ s
¢(15! ft$ s" 7!5! ft$ s)
= 72! 75 lbf$ ft (b)
Substitute (a) and (b) into Eq. (1)
H$ = " (109! 13 lbf$ ft) + 72! 75 lbf$ ft
= "36! 38lbf
ft
The force acting on the end plates is equal in magnitude and opposite in direction(Newton’s third law).
Hwater on the end plates = 36! 38lbfftacting to the right
485
PROBLEM 6.56
Situation: Water is discharged from a two-dimensional slot–additional details areprovided in the problem statement
Find: (a)Pressure at the gage.(b)Force (per foot of length of slot) on the end plates of the slot.
APPROACH
Apply the Bernoulli equation, then the hydrostatic equation, and nally the momen-tum principle.
ANALYSIS
Velocity calculation
;0 = 0!4$0!07 = 5!71 m/s
;> = 0!40$0!20 = 2!00 m/s
Bernoulli equation
%> = (1000$2)(5!712 " 2!002) = 14!326 kPa
Hydrostatic equation
%gage = 14' 326" 9810× 0!1 = 13.3 kPa
Momentum principle (E-direction)
XH$ = /!;!$ " /#;#$
H$ + %>I> = #](;0 " ;>)
thus
H$ = "14' 326× 0!2 + 1000× 0!4(5!71" 2!00)= "1' 381 N
= -1.38 kN/m
486
PROBLEM 6.57
Situation: Water ows through a spray head–additional details are provided in theproblem statement.
v1
v2
30o
Find: Force acting through the bolts needed to hold the spray head on: H3
APPROACH
Apply the Bernoulli equation, and then the momentum principle.
ANALYSIS
Velocity calculation
;1 = ]$I1 = 3$(0$4× 0!52) = 15!28 ft/s
Bernoulli equation
%1 =#
2
¡;22 " ;
21
¢
=1!94
2
¡652 " 15!282
¢
= 3872!
Momentum principle (?-direction)
XH3 = /!;!3 " /#;#3
H3 + %1I1 = #](";2 sin 30! " ;1)H3 = ("3872)(0$4× 0!52) + 1!94× 3("65 sin 30! " 15!28)
= -1040 lbf
487
PROBLEM 6.58
Situation: An unusual nozzle creates two jets of water–additional details are providedin the problem statement.
Find: Force required at the ange to hold the nozzle in place: F
APPROACH
Apply the continuity principle, then the momentum principle.
ANALYSIS
Continuity principle
;1 =]
I
=2× 80!2× 0$4× 12
0$4× 42= 10!025 fps
Momentum principle (E-direction)
PH$ =
P/!$ " /#;#$
%1I1 + H$ = /2;2$ + /3;3$ " /1;1$
H$ = "43× 0 × 22 + 1!94× 80!22 × 0 × !52$144"(1!94× 80!2× 0 × 0!52$144)× 80!2 sin 30"(1!94× 10!025× 0 × 0!16672)× 10!025
= "524!1 lbf
Momentum principle (?-direction)
XH3 = /!3 " /#;#3
H3 = /3;33 = #I;3(";3 cos 30!)= "1!94(0$4× (1$12)2)80!22 cos 30!
= "58!94 lbf
Net forceF=(-524.1i-58.9j) lbf
488
PROBLEM 6.59
Situation: Liquid ows through a ”black sphere”–additional details are provided inthe problem statement.
v2
y
x
v1v3
30o
Find: Force in the inlet pipe wall required to hold sphere stationary: F
APPROACH
Apply the continuity principle, then the momentum principle.
ANALYSIS
Continuity principle
I1;1 = I2;2 +I3;3
;3 = ;1I1I3" ;2
I2I3
= 50 ft$ s
µ22
12
¶" 100 ft$ s
µ12
12
¶
= 100 ft$ s
Momentum principle (E-direction)
H$ = /3;3$
= "#I3;23 sin 30!
= "(1!94× 1!2)
Ã0 (1$12)2
4
!(1002) sin 30!
= "63!49 lbf
?-directionH3 ". + %1I1 = /2;23 + /3;33 " /1;13
thusH3 =. " %1I1 + /2;2 "/3;3 cos 30
! " /1;1
489
Calculations
.1 " %1I1 = 200" 60× 0 × 12
= 11!50 lbf
/2;2 = #I2;22
= (1!2× 1!94)
Ã0 (1$12)2
4
!(1002)
= 126!97 lbf
/3;3 cos 30! = #I3;
23 cos 30
!
= (1!2× 1!94)
Ã0 (1$12)2
4
!(100)2 cos 30!
= 109!96 lbf
/1;1 = #I1;21
= (1!2× 1!94)
Ã0 (2$12)2
4
!(502)
= 126! 97 lbf
thus,
H3 = (. " %1I1) + /2;2 " (/3;3 cos 30!)" /1;1
= (11!50) + 126!97" (109!96)" 126! 97= "98! 46 lbf
Net ForceF = ("63!5i" 98!5j) lbf
490
PROBLEM 6.60
Situation: Liquid ows through a ”black sphere”–additional details are provided inthe problem statement.
Find: Force required in the pipe wall to hold the sphere in place: F
APPROACH
Apply the continuity principle, then the momentum principle.
ANALYSIS
Continuity principle
;3 = (10× 52 " 30× 2!52)$(2!52)= 10 m/s
Momentum principle (E-direction)
H$ = "10 sin 30! × 1500× 10× 0 × 0!01252
= "36!8 N
Momentum principle (?-direction)
H3 = "400' 000× 0 × 0!0252 + 600 + (15000)×("102 × 0!0252 + 302 × 0!01252
"102 × 0!01252 cos 30!)= 119 N
Net ForceF = ("36!8i+ 119j) N
491
PROBLEM 6.61
Situation: Liquid ows through a “black box”–additional details are provided in theproblem statement.
1
2
3
x
4
Find: Force required to hold the “black box” in place: F
APPROACH
Apply the continuity principle, then the momentum principle.
ANALYSIS
Continuity principle
]4 = 0!6" 0!10= 0!50 m3/s
Momentum principle (E-direction)
H$ = " /1;1' " /3;3'= " /1;1 + /3;3
= 0
?-direction
H3 = /2;2( + /4;4(H3 = #]2;2 " #]4;4
= (2!0× 1000)(0!1)(20)" (2!0× 1000)(0!5)(15)= "11!0 kN
Net ForceF = (0i" 11!0j) kN
492
PROBLEM 6.62
To verify Eq. (6.11) the quantities ]' ;1' ;2I>' ?1' ?2 and HJ will have to be measured.Since a laboratory is available for your experiment it is assumed that the laboratoryhas equipment to obtain ]. The width > can be measured by a suitable scale. Thedepths ?1 and ?2 can be measured by means of piezometer tubes attached to openingsin the bottom of the channel or by means of point gages by which the actual level ofthe surface of the water can be determined. Then ;1 and ;2 can be calculated from; = ]$I = ]$(>?).
The force on the gate can be indirectly evaluated by measuring the pressure distribu-tion on the face of the gate. This pressure may be sensed by piezometers or pressuretransducer attached to small openings (holes) in the gate. The pressure taps on theface of the gate could all be connected to a manifold, and by appropriate valvingthe pressure at any particular tap could be sensed by a piezometer or pressure trans-ducer. The pressures at all the taps should be measured for a given run. Then byintegrating the pressure distribution over the surface of the gate one can obtain HJ.Then compare the measured HJ with the value obtained from the right hand side ofEq. (6.11). The design should be such that air bubbles can be purged from tubesleading to piezometer or transducer so that valid pressure readings are obtained.
493
PROBLEM 6.63
Situation: Water ows through a sluice gate––additional details are provided inthe problem statement.
2F
0.6 ft
3 ft
1
Find: Force of water (per unit width) acting on the sluice gate.
APPROACH
Apply the Bernoulli equation, and then the momentum principle.
ANALYSIS
Bernoulli equation
;21$2) + R1 = ;22$2) + R2
(0!6$3)2;22$2) + 3 = ;22$2) + 0!6
;2 = 12!69 fps
;1 = 2!54
] = 7!614 cfs/ft
Momentum principle (E-direction)
XH$ = #](;2$ " ;1$)
H$ + %1I1 " %2I2 = #](;2 " ;1)H$ = "62!4× 3!0× 3!0$2 + 62!4× 0!6× 0!6$2 + 1!94× 7!614
×(12!69" 2!54) = -120 lbf/ft
494
PROBLEM 6.64
Situation: A ow in a pipe is laminar and fully developed–additional details areprovided in the problem statement.
Find: Derive a formula for the resisting shear force (HN) as a function of the parame-ters 1' %1' %2' #' and \!
APPROACH
Apply the momentum principle, then the continuity principle.
ANALYSIS
Momentum principle (E-direction)
XH$ =
Z
1&
#;(; · AI)
%1I1 " %2I2 " HN =
Z
=2
#@22AI" (#I@1)@1
%1I" %2I" HN = "#@21I+Z
=2
#@22AI (1)
Integration of momentum outow term
@2 = @max(1" (3$30)2)2
@22 = @2max(1" (3$30)2)2
Z
=2
#@22AI =
K0Z
0
#@2max(1" (3$30)2)2203A3
= "#@2max0320
K0Z
0
(1" (3$30)2)2("23$320)A3
To solve the integral, let
@ = 1"µ3
3!
¶2
Thus
A@ =
µ"23
32!
¶A3
495
The integral becomes
Z
=2
#@22AI = "#@2max0320
0Z
1
@2A@
= "#@2max0320
µ@3
3|01
¶
= "#@2max0320
µ0"
1
3
¶
=+#@2max03
20
3(2)
Continuity principle
\I =
Z@AI
=
K0Z
0
@max(1" (3$30)2)20 rdr
= "@max0320
K0Z
0
(1" (3$30)2)("23$320) dr
= "@max0320(1" (3$30)2)2$2|K00
= @max0320$2
Therefore@max = 2\
Substituting back into Eq. 2 givesZ
=2
#@22AI = 4#\20320$3
Finally substituting back into Eq. 1, and letting @1 = \ , the shearing force is givenby
HN=892
4[%1 " %2 " (1$3)#\2]
496
PROBLEM 6.65
Situation: A swamp boat is powered by a propeller–additional details are providedin the problem statement.
1
2
Find: (a) Propulsive force when the boat is not moving.(b) Propulsive force when the boat is moving at 30 ft/s.
Assumptions: When the boat is stationary, neglect the inlet ow of momentum—thatis, assume ;1 ! 0!
APPROACH
Apply the momentum principle.
ANALYSIS
a.) Boat is stationary
Momentum principle (E-direction) Select a control volume that surrounds the boat.
XH$ = /;2 " /;1
Hstop % /;2
Mass ow rate
/ = #I2;2
=¡0!00228 slug$ ft3
¢Ã0 (3 ft)2
4
!(90 ft$ s)
= 1!451 slug$ s
Thus
Hstop = /;2
= (1!451 slug$ s) (90 ft$ s)
= 130!59 lbf
Force (stationary boat) = 131 lbf
b.) Boat is moving
497
Momentum principle (E-direction). Select a control volume that surrounds the boatand moves with the speed of the boat. The inlet velocity is ;1 = 30 ft/s
XH$ = / (;2 " ;1)
= (1!451 slug$ s) (90" 30) ft$ sH$ = #](;2 " ;1)H$ = 0!00228× 636!17(90" 30)
= 87!1 lbf
Force (moving boat) = 87.1 lbf
498
PROBLEM 6.66
Situation: Air ows through a windmill–additional details are provided in the prob-lem statement.
Find: Thrust on windmill.
APPROACH
Apply the continuity principle, then the momentum principle.
ANALYSIS
Continuity principle;2 = 10× (3$4!5)2 = 4!44 m/s
Momentum principle (E-direction)
XH$ = /(;2 " ;1)
H$ = /(;2 " ;1)= (1!2)(0$4× 33)(10)(4!44" 10)
H$ = "472!0 N (acting to the left)
& = 472 N (acting to the right)
499
PROBLEM 6.67
Situation: A jet pump is described in the problem statement.
Find: (a) Derive a formula for pressure increase across a jet pump.(b) Evaluate the pressure change for water if IV$I! = 1$3' ;V = 15 m/s and ;! = 2m/s.
APPROACH
Apply the continuity principle, then the momentum principle.
ANALYSIS
Continuity principle
;1 = ;0120$(1
20 "1
2V ) (1)
;2 = (;0120 + ;V1
2V )$1
20 (2)
Momentum principle (E-direction)
XH$ = /(;2 " ;1)
(%1 " %2)0120$4 = "#;
210(1
20 "1
2V )$4" #;
2V01
2V$4 + #;
2201
20$4
thus,
(%2 " %1) = #;21(120 "12
V )$120 + #;
2V ×12
V$120 " #;22 (3)
Calculations
;1 = ;0$(1" (1V$10)2)= 2$(1" (1$3))= 3 m/s
;2 = ;0 + ;V(12V$1
20)
= 2 + 15(1$3)
= 7 m/s
from Eq. (3)
%2 " %1 = #£;21¡1" (1V$10)2
¢+ ;2V (1V$10)
2 " ;22¤
= 1000£32(1" (1$3)) + 152(1$3)" 72
¤
= 32 kPa
500
PROBLEM 6.68
Situation: The problem statement describes a jet pump.2 6v /2g2
xvj
4ft y"
1
v= 1 ft/s
Find: Develop a preliminary design by calculating basic dimensions for a jet pump.
APPROACH
Apply the momentum principle, then the continuity principle.
ANALYSIS
Momentum principle (E-direction)Carry out the analysis for a section 1 ft wide (unit width) and neglect bottom friction.
XH$ = /2;2 " /1;1 " /V;V
(?21$2" (?22$2 = "1#(1× (4"!?))" ;V#(;V!?) + ;2#(;2?2) (1)
but ?2 = 4 ft + 6 ;2$2)
= 4 + 6$2) = 4!0932 ft
Continuity principle
;2?2 = ;1(4"!?) + ;V!?;2 = ;1(4"!?)$?2 + ;V!?$?2
Assume!? = 0!10 ft
Then;2 = 1(3!9)$(4!093) + ;V × 0!1$4!0392 = 0!9528 + 0!02476;V (2)
Combine Eqs. (1) and (2)
;2V " (0!9528 + 0!02476;2V × 40!932 = 5)(?22 " ?
21)" 39!0
= 82!44 ft2$s2
Solving:;V = 12!1 ft/s IV = 0!10 ft2
If circular nozzles were used, then IV = (0$4)A2V ; AV = 4!28 in. Therefore, one could
use 8 nozzles of about 4.3 in. in diameter discharging water at 12.1 ft/s
COMMENTS
Like most design problems, this problem has more than one solution. That is, othercombinations of AV' ;V and the number of jets are possible to achieve the desiredresult.
501
PROBLEM 6.69
Situation: Lift and drag forces are being measured on an airfoil that is situated in awind tunnel–additional details are provided in the problem statement.
y pu
8 m/s
2
12 m/s0.25 m
0.25 mL
D
0.5 m
x pl
1m
c.v. c.s.
1
10 m/s
Find: (a) Lift force: 2(b) Drag force: 1
APPROACH
Apply the momentum principle.
ANALYSIS
Momentum principle (E-direction)X
H$ =X
1&
/;0 " /1;1
"1 + %1I1 " %2I2 = ;1("#;1I) + ;'(#;'I$2) + ;0(#;0I$2)"1$I = %2 " %1 " #;21 + #;
2'$2 + #;
20$2
where
%1 = %T(E = 0) = %<(E = 0) = 100 Pa, gage
%2 = %T(E = 1) = %<(E = 1) = 90 Pa, gage
then
"1$I = 90" 100 + 1!2("100 + 32 + 72)"1$I = "5!2
1 = 5!2× 0!52 = 1.3 N
Momentum principle (?-direction)X
H3 = 0
"2+Z 2
1
%<DAE"Z 1
0
%TDAE = 0 where D is depth of tunnel
"2+Z 1
0
(100" 10E+ 20E(1" E))0!5AE"Z 1
0
(100" 10E" 20E(1" E))0!5AE = 0
"2+ 0!5(100E" 5E2 + 10E2 " (20$3)E3)|10 " 0!5(100E" 5E2 " 10E2 + (20$3)E3|10 = 0
502
thus,
"2+ 49!167" 45!833 = 0
2 = 3!334 N
503
PROBLEM 6.70
Situation: A torpedo-like device is being tested in a wind tunnel–additional detailsare provided in the problem statement.
c.s.Drag
Force of device on air= -Drag
Find: (a) Mass rate of ow.(b)Maximum velocity at the outlet section.(c)Drag on the device and support vanes.
APPROACH
Apply the momentum principle.
ANALYSIS
Mass ow rate
/ = #;I
=¡0!0026 slug$ ft3
¢× (120 ft$ s)×
µ0(3!0 ft)2
4
¶
= 2!205 slug$ s
/ = 2!205 slug/ s
At the outlet section Z 0
0
;AI = ]
But ; is linearly distributed, so ; = ;max(3$30)! ThusZ K0
0
µ;max
3
3!
¶203A3 = ;I
2;max320
3= ;320
;max =3;
2
=3 (120 ft$ s)
2;max = 180 ft$ s
;max = 180 ft$ s
504
Momentum principle (E-direction)X
H$ =
Z K0
0
#;22AI" /;1 (1)
a.) Forces analysis XH$ = %1I1 " %2I2 "1 (a)
b.) Outlet velocity prole
;2 = ;max3
3!
=
µ3;
2
¶µ3
3!
¶(b)
c.) Outlet momentum owZ K0
0
#;22AI =
Z K0
0
#
·µ3;
2
¶µ3
3!
¶¸2203A3
= 20#
µ3;
2
¶2 Z K0
0
µ3
3!
¶23A3
= 20#
µ3;
2
¶2µ32!4
¶(c)
Substituting Eqns. (a) and (c) into the momentum equation (1) givesX
H$ =
Z K0
0
#;22AI" /;1
%1I1 " %2I2 "1 = 20#
µ3;
2
¶2µ32!4
¶" /;1
1 = %1I1 " %2I2 " 20#µ3;
2
¶2µ32!4
¶+ /;1 (2)
Calculations (term by term)
%1I1 = (144× 0!24)×µ0 × 32
4
¶
= 244!3 lbf
%2I2 = (144× 0!1)×µ0 × 32
4
¶
= 101! 9 lbfZ K0
0
#;22AI = 20#
µ3;
2
¶2µ32!4
¶
= 20 (0!0026)
µ3 (120)
2
¶2µ1!52
4
¶
= 297! 7 lbf
/;1 = (2!205) (120)
= 264! 6 lbf
505
Substituting numerical values into Eq. (2)
1 = %1I1 " %2I2 " 20#µ3;
2
¶2µ32!4
¶+ /;1
= 244!3 lbf " 101! 9 lbf " 297! 7 lbf + 264! 6 lbf= 109!3 lbf
1 = 109!3 lbf
506
PROBLEM 6.71
Situation: A tank of water rests on a sled–additional details are provided in theproblem statement.
Find: Acceleration of sled at time P
APPROACH
Apply the momentum principle.
ANALYSIS
This type of problem is directly analogous to the rocket problem except that theweight does not directly enter as a force term and %G = %atm. Therefore, the appro-priate equation is
+ A;&$AP = #;2GIG " H(C = (1$+)(#;2G(0$4)A
2G " 7. )
where 7 =coe"cient of sliding friction and . is the weight
. = 350 + 0!1× 1000× 9!81 = 1331 NC = ()$. )(1' 000× 252(0$4)× 0!0152 " (1331× 0!05))= (9!81$1' 331)(43!90) m/s2
= 0.324 m/s2
507
PROBLEM 6.72
Situation: A uid jet strikes a wave that is moving at a speed ;@ = 7 m/s. 11 = 6cm. Speed of the uid jet is 20 m/s, relative to a xed frame.
45o
x
y
v1
vv
v2
Find: Force of the water on the vane.
ANALYSIS
Force and momentum diagramsSelect a control volume surrounding and moving with the vane. Select a referenceframe attached to the moving vane.
Momentum principle (E-direction)X
H$ = /;2$ " /;1$
"H$ = " /;2 cos 45! " /;1
Momentum principle (?-direction)X
H3 = /;23 " /;13
H3 = /;2 sin 45!
Velocity analysis
• ;1 is relative to the reference frame = (20" 7) = 13.
• in the term / = #I; use ; which is relative to the control surface. In this case; = (20" 7) = 13 m/s
• ;2 is relative to the reference frame ;2 = ;1 = 13 m/s
Mass ow rate
/ = #I;
= (1' 000 kg)(0$4× 0!062)(13)= 36!76 kg/s
508
Evaluate forces
H$ = /;1(1 + cos 45)
= 36!76× 13(1 + cos 45) = 815!8 N
which is in the negative E"direction.
H3 = /;2 sin 45
= 36!76× 13 sin 45 = 338!0 N
The force of the water on the vane is the negative of the force of the vane on thewater. Thus the force of the water on the vane is
F = (815!8i"338j) N
509
PROBLEM 6.73
Situation: A cart is moving with steady speed–additional details are provided in theproblem statement.
17 m/s
17 m/s
17 m/s
y
x
2
3
1
45o
Find: Force exerted by the vane on the jet: F
APPROACH
Apply the momentum principle.
ANALYSIS
Make the ow steady by referencing all velocities to the moving vane and let the c.v.move with the vane as shown.
Momentum principle (E-direction)
H$ = /2;2$ " /1;1
H$ = (172 cos 45!)(1000)(0$4)(0!12)$2" (17)(1000)(17)(0$4)(0!12)= +802" 2270 = "1470 N
Momentum principle (?-direction)
H3 = /2;23 " /;33
= (17)(1' 000)(sin 45!)(17)(0$4)(0!12)$2" (17)2(1000)(0$4)(0!12)$2= "333 N
F(water on vane) = (1470i+ 333j) N
510
PROBLEM 6.74
Situation: A cart is moving with steady speed–additional details are provided in theproblem statement.
Find: Rolling resistance of the cart: HK!22#:D
ANALYSIS
Let the control surface surround the cart and let it move with the cart at 5 ft/s.Then we have a steady ow situation and the relative jet velocities are shown below.
55 ft/s
55 ft/s
55 ft/s
y
x
2
3
1
45o
Momentum principle (E-direction)
XH$ = /2;2' " /1;1
Calculations
/1 = #I1,1
= (1!94)(0$4× 0!12)55= 0!838 kg/s
/2 = 0!838$2
= 0!419 kg/s
Hrolling = /1;1 " /2;2 cos 45!
= 0!838× 55" 0!419× 55 cos 45!
Hrolling = 29!8 lbf (acting to the left)
511
PROBLEM 6.75
Situation: A water is deected by a moving cone.Speed of the water jet is 25m$ s (to the right). Speed of the cone is 13m$ s (to theleft). Diameter of the jet is 1 = 10 cm!Angle of the cone is K = 50!.
Find: Calculate the external horizontal force needed to move the cone: H$
Assumptions: As the jet passes over the cone (a) assume the Bernoulli equationapplies, and (b) neglect changes in elevation.
APPROACH
Apply the momentum principle.
ANALYSIS
Select a control volume surrounding the moving cone. Select a reference frame xedto the cone. Section 1 is the inlet. Section 2 is the outlet.Inlet velocity (relative to the reference frame and surface of the control volume).
;1 = ,1 = (25 + 13) m$ s
38m$ s
Bernoulli equation. Pressure and elevation terms are zero, so
,1 = ,2 = ;2 = 38m$ s
Momentum principle (E-direction)
H$ = /(;2$ " ;1)= #I1,1 (;2 cos K " ;1)= #I1,
21 (cos K " 1)
=
µ1000
kg
m3
¶×µ0 × (0!1m)2
4
¶× (38m$ s)2 (cos 50! " 1)
= "4!051 kN
H$ = 4!05 kN (acting to the left)
512
PROBLEM 6.76
Situation: A jet of water is deected by a moving van–additional details are providedin the problem statement.
Find: Power (per foot of width of the jet) transmitted to the vane: *
APPROACH
Apply the momentum principle.
ANALYSIS
Select a control volume surrounding the moving cone. Select a reference frame xedto the cone.
Velocity analysis
;1 = ,1 = 40 ft/s
;2 = 40 ft/s
Momentum principle (E-direction)
XH$ = /(;2$ " ;1)
H$ = 1!94× 40× 0!3× (40 cos 50" 40)= "332!6 lbf
Calculate power
* = H;
= 332!6× 60= 19,956 ft-lbf/s = 36.3 hp
513
PROBLEM 6.77
Situation: A sled of mass /& = 1000 kg is decelerated by placing a scoop of widthY = 20 cm into water at a depth A = 8 cm.
Find: Deceleration of the sled: C&
ANALYSIS
Select a moving control volume surrounding the scoop and sled. Select a stationaryreference frame.
Momentum principle (E-direction)
0 =A
AP(/&;&) + /;2' " /;1'
Velocity analysis
;1' = 0
,1 = 100 m/s
,2 = 100 m/s
v2 = 100 m/s[" cos 60i+ sin 60j] + 100i m/s;2$ = 50 m/s
The momentum principle equation simplies to
0 = /&C& + /;2' (1)
Flow rate
/ = #I1,1
= 1000× 0!2× 0!08× 100= 1600 kg/s
From Eq. (1).
C& = "/;2$/&
=("1600)(50)
1000
= -80 m/s2
514
PROBLEM 6.78
Situation: A snowplow is described in the problem statement.
Find: Power required for snow removal: *
APPROACH
Apply the momentum principle.
ANALYSIS
Momentum principle (E-direction)Select a control volume surrounding the snow-plow blade. Attach a reference frameto the moving blade. X
H$ = #](;2$ " ;1)
Velocity analysis
,1 = ;1 = 40 ft/s
;2' = "40 cos 60! cos 30!
= "17!32 ft/s
CalculationsX
H$ = 1!94× 0!2× 40× 2× (1$4)("17!32" 40)= "444!8 lbf
Power
* = H,
= 444!8× 40= 17' 792 ft-lbf/s
* = 32!3 hp
515
PROBLEM 6.79
Maximum force occurs at the beginning; hence, the tank will accelerate immediatelyafter opening the cap. However, as water leaves the tank the force will decrease,but acceleration may decrease or increase because mass will also be decreasing. Inany event, the tank will go faster and faster until the last drop leaves, assuming noaerodynamic drag.
516
PROBLEM 6.80
Situation: A cart is moving with a steady speed along a track.Speed of cart is 5m$ s (to the right). Speed of water jet is 10m$ s.Nozzle area is I = 0!0012m2!
Find: Resistive force on cart: HK
APPROACH
Apply the momentum principle.
ANALYSIS
Assume the resistive force (HK) is caused primarily by rolling resistance (bearingfriction, etc.); therefore, the resistive force will act on the wheels at the groundsurface. Select a reference frame xed to the moving cart. The velocities andresistive force are shown below.
5 m/s
5 m/s
2
1
c.s.
x
Fr
Velocity analysis
,1 = ;1 = ;2 = 5 m/s
/ = %I1,1
= (1000)(0!0012)(5)
= 6 kg/s
Momentum principle (E-direction)
XH$ = /(;2 " ;1)
"HK = 6("5" 5) = "60 N
HK = 60 N (acting to the left)
517
PROBLEM 6.81
Situation: A jet with speed ;V strikes a cart (+ = 10 kg), causing the cart toaccelerate.The deection of the jet is normal to the cart [when cart is not moving].Jet speed is ;V = 10 m/s. Jet discharge is ] = 0!1 m3/s.
Find: (a)Develop an expression for the acceleration of the cart.(b)Calculate the acceleration when ;1 = 5 m/s.
Assumptions: Neglect rolling resistance.Neglect mass of water within the cart.
APPROACH
Apply the momentum principle.
ANALYSIS
Select a control surface surrounding the moving cart. Select a reference frame xedto the nozzle. Note that a reference frame xed to the cart would be non-inertial.
Force and momentum diagrams
y
x
m v2 2
.
m v1 1
.
W
N
(Mv )=Mac c
ddt
Momentum principle (E-direction)
XH$ =
A
AP(/;1) + /2;2' = " /1;1
Momentum accumulation
Note that the cart is accelerating. Thus,
A
AP
Z
1@
;$#A, =A
AP;1
Z
1@
#A, =A
AP(+;1)
= /C1
518
Velocity analysis
,1 = ;V " ;1 [relative to control surface];1 = ;V [relative to reference frame (nozzle)]
from conservation of mass
;23 = (;V " ;1);2' = ;1
/2 = /1
Combining terms
XH$ =
A
AP(+;1) + /(;2$ " ;1)
0 = +C1 + #I1(;V " ;1)(;1 " ;V)
C1 =(LX*@))(@)"@*)2
Y
Calculations
C1 =1' 000× 0!1$10(10" 5)2
10
C1 = 25 m$ s2 (when ;1 = 5m$ s)
519
PROBLEM 6.82
Situation: A hemispherical nozzle sprays a sheet of liquid at a speed ; through a 180!
arc. Sheet thickness is P.
v
yd!
!
Find: An expression for the force in ?-direction to hold the nozzle stationary.The math form of the expression should be H3 = H3(#' ;' 3' P)!
APPROACH
Apply the momentum principle.
ANALYSIS
Momentum principle (?-direction)
H3 =
Z
1&
;3#V · dA
=
Z 8
0
(; sin K)#;(P3AK)
= #;2P3
Z 8
0
sin KAK
H3=2#, 2P3
520
PROBLEM 6.83
Situation: The problem statement describes a planar nozzle.
Find:a.) Derive an expression for b (K)b.) Derive an expression for e (K)
ANALYSIS
Dene IG as the projection of the exit area on the ? plane. Use the momentumequation to solve this problem and let the control surface surround the nozzle andfuel chamber as shown above. The forces acting on the system are the pressure forcesand thrust, & . The pressure forces in the E-direction are from %0 and %G. Writingthe momentum equation in the E-direction we have:
& + %0IG " %GIG =
Z
=
;$#V · dA
& + %0IG " %GIG =
Z2(; cos K)#(";2"AK)
& + %0IG " %GIG = "2;2#2"Z O
0
cos KAK
& + %0IG " %GIG = "2;2#2" sin K
But
/ = 2
Z O
0
#;AI = 2
Z O
0
#;2"AK = 2#;2"K
& + %0IG " %GIG = "2#;22"K(sin K$K)& + %0IG " %GIG = "; / sin K$K
& = /;(" sin K$K) + %GIG " %0IG& = /;b(K) +IG(%G " %0)e(K)
where
b(K) = " sin K/K
e(K) = 1
521
PROBLEM 6.84
Situation: Air ows through a turbofan engine. Inlet mass ow is 300 kg$ s!Bypass ratio is 2.5. Speed of bypass air is 600m$ s!Speed of air that passes through the combustor is 1000m$ s!
m2
m1
.
.
300 m/s
600 m/s
1,000 m/s
c.s.
A B
Additional details are given in the problem statement.
Find: Thrust (& ) of the turbofan engine.
Assumptions: Neglect the mass ow rate of the incoming fuel.
APPROACH
Apply the continuity and momentum equations.
ANALYSIS
Continuity equation/= = /> = 300 kg$ s
also
/> = /combustor + /bypass
= /combustor + 2!5 /combustor
/> = 3!5 /combustor
Thus
/combustor =/>
3!5=300 kg$ s
3!5= 85! 71 kg$ s
/bypass = /> " /combustor
= 300 kg$ s" 85! 71 kg$ s= 214!3 kg$ s
522
Momentum equation (E-direction)
XH$ =
X/;out " /;in
H$ = [ /bypass,bypass + /combustor,combustor]" /=,=
= [(214!3 kg$ s) (600m$ s) + (85! 71 kg$ s) (1000m$ s)]" (300 kg$ s) (300m$ s)= 124' 290N
& = 124' 300 N
523
PROBLEM 6.85
Situation: A problem in rocket-trajectory analysis is described in the problem state-ment.
Find: Initial mass of a rocket needed to place the rocket in orbit.
ANALYSIS
+0 = +( exp(,00e$& )
= 50 exp(7200$3000)
= 551.2 kg
524
PROBLEM 6.86
Situation: A toy rocket is powered by a jet of water–additional details are providedin the problem statement.
Find: Maximum velocity of the rocket.
Assumptions: Neglect hydrostatic pressure; Inlet kinetic pressure is negligible.
ANALYSIS
Newtons 2:A law.X
H = /C
& ". = /C
where & =thrust and . =weight
& = /;G
/;G "/) = /A;F$AP
A;F$AP = (&$/)" )= (&$(/# " /P))" )
A;F = ((&AP)$(/# " /P))" )AP;F = ("&$ /)LQ(/# " /P)" )P+ const.
where ;F = 0 when P = 0! Then
const. = (&$ /) ln(/#)
;F = (&$ /) ln((/#)$(/# " /P))" )P;Fmax = (&$ /) ln(/#$/()" )P(&$ / = /;G$ / = ;G
Bernoulli equation(neglecting hydrostatic pressure)
%# + #(;2# $2 = %G + #(;
2G$2
The exit pressure is zero (gage) and the inlet kinetic pressure is negligible. So
;2G = 2%#$#(= 2× 100× 103$998= 200 m2$s2
;G = 14!14 m/s
/ = #G;GIG
= 1000× 14!14× 0!1× 0!052 × 0$4= 2!77 kg/s
525
Time for the water to exhaust:
P = /%$ /
= 0!10$2!77
= 0!0369
Thus
;max = 14!14 ln((100 + 50)$50)" (9!81)(0!036)
= 15.2 m/s
526
PROBLEM 6.87
Situation: A rocket with four nozzles is described in the problem statement.
Find: Thrust of the rocket (all four nozzles).
APPROACH
Apply the momentum principle.
ANALYSIS
Momentum principle (R-direction)
XH; = /;;[per engine]
& " %'IG cos 30! + %GIG cos 30! = ";G cos 30!#;GIG& = "1× 0!866
×(50' 000" 10' 000 + 0!3× 2000 × 2000)= "1!074× 106 N
Thrust of four engines
&total = 4× 1!074× 106
= 4!3× 1068= 4.3 MN
527
PROBLEM 6.88
Situation: A rocket nozzle is connected to a combustion chamber.Mass ow: / = 220 kg$ s. Ambient pressure: %! = 100 kPa!Nozzle inlet conditions: I1 = 1m2' @1 = 100m$ s, %1 = 1!5MPa-abs.Nozzle exit condition? I2 = 2m2' @2 = 2000m$ s, %2 = 80 kPa-abs.
Assumptions: The rocket is moving at a steady speed (equilibrium).
Find: Force on the connection between the nozzle and the chamber.
APPROACH
Apply the momentum principle to a control volume situated around the nozzle.
ANALYSIS
Momentum principle (E-direction)
XH$ = /!;!$ " /#;#$
H + %1I1 " %2I2 = /(;2 " ;1)
where H is the force carried by the material that connects the rocket nozzle to therocket chamber.
Calculations (note the use of gage pressures).
H = /(;2 " ;1) + %2I2 " %1I1= (220 kg$ s) (2000" 100)m$ s +
¡"20' 000N$m2
¢ ¡2m2
¢
"¡1' 400' 000N$m2
¢ ¡1m2
¢
= "1!022× 106 N= "1!022 MN
The force on the connection will be
H = 1!022 MN
The material in the connection is in tension.
528
PROBLEM 6.89
Situation: A problem related to the design of a conical rocket nozzle is described inthe problem statement.
Find: Derive an expression for the thrust of the nozzle.
APPROACH
Apply the momentum principle.
ANALYSIS
Momentum principle (E-direction)
XF =
Zv#v · dA
& =
Z H
0
;G cos K#;G
Z 2+
0
sin K3Af3AK
& = 2032#;2G
Z H
0
cos K sin KAK
= 2032#;2G sin2 T$2
= #;2G2032(1" cosT)(1 + cosT)$2
Exit Area
IG =
Z H
0
Z 28
0
sin K3Af3AK = 2032(1" cosT)
& = #;2GIG(1 + cosT)$2 = /;G(1 + cosT)$2
529
PROBLEM 6.90
Situation: A valve at the end of a gasoline pipeline is rapidly closed–additionaldetails are provided in the problem statement.
Find: Water hammer pressure rise: !%
ANALYSIS
Speed of sound
Z =pN@$#
= ((715)(106)$(680))045
= 1025 m/s
Pressure rise
!% = #;Z
= (680)(10)(1025)
= 6.97 MPa
530
PROBLEM 6.91
Situation: A valve at the end of a long water pipeline is rapidly closed–additionaldetails are provided in the problem statement.
Find: Water hammer pressure rise: !%
ANALYSIS
Z =
sN@#
=
r2!2× 109
1000= 1483 m/s
Pcrit = 22$Z
= 2× 10' 000$1483= 13!5 s F 10 s
Then
!% = #;Z
= 1000× 4× 1483= 5' 932' 000 Pa
= 5.93 MPa
531
PROBLEM 6.92
Situation: A valve at the end of a water pipeline is instantaneously closed–additionaldetails are provided in the problem statement.
Find: Pipe length: 2
ANALYSIS
Determine the speed of sound in water
Z =
sN@#
=
r2!2× 109
1000= 1483 m/s
Calculate the pipe length
P = 42$Z
3 = 42$1483
2=1112 m
532
PROBLEM 6.93
Situation: A valve at the end of a water pipeline is closed during a time period of 10seconds.Additional details are provided in the problem statement.
Find: Maximum water hammer pressure: !%max
ANALYSIS
Determine the speed of sound in water
Z =
sN@#
Z =
r320' 000
1!94= 4874 ft/s
Determine the critical time of closure
Pcrit = 22$Z
= 2× 5× 5280$4874= 10!83 s F 10 s
Pressure rise
!%max = #;Z
= 1!94× 8× 4874= 75,644 psf = 525 psi
533
PROBLEM 6.94
Situation: A valve at the end of a long water pipe is shut in 3 seconds–additionaldetails are provided in the problem statement
Find: Maximum force exerted on valve due to the waterhammer pressure rise: H@'2@G
ANALYSIS
Pcrit =22
Z
=2× 40001485!4
= 5!385 s F 3 s
Hvalve = I!%
= I#(]$I)Z
= #]Z
= 998× 0!03× 1483= 44!4 kN
534
PROBLEM 6.95
Situation: The easy way to derive the equation for waterhammer pressure rise is touse a moving control volume.
Find: Derive the equation for waterhammer pressure rise (Eq. 6.12).
ANALYSIS
V+c cP'
p+v=c= +
"'
' ' "'
Continuity equation
(; + Z)# = Z(#+!#)
! !# = ;#$Z
Momentum principle (E-direction)
XH$ =
X;$#v ·A
%I" (%+!%)I = "(, + Z)#(, + Z)I+ Z2(#+!#)I!% = 2#;Z" Z2!#+ ;2#
= 2#;Z" Z2;#$Z+ ;2#= #;Z+ #;2
Here #;2 is very small compared to #;Z
! !% = #;Z
535
PROBLEM 6.96
Situation: The problem statement describes a waterhammer phenomena in a pipe.
Find: Plot a pressure versus time trace at point B for a time period of 5 seconds.Plot a pressure versus distance trace at P = 1!5 s!
ANALYSIS
; = 0!1m$ s
Z = 1483m$ s
%pipe = 10( " #;2pipe$2% 98' 000 Pa
!% = #;Z
= 1000× 0!10× 1483!% = 148' 000 Pa
Thus
%max = %+!%
= 98' 000 + 148' 000
= 246 kPa- gage
%min = %"!% = "50 kPa gageThe sequence of events are as follows:
!P "!PPressure wave reaches pt B. 1000$1483 = 0!674 s 0.67 s
Time period of high pressure at B 600$1483 = 0!405 s 1.08 sTime period of static pressure at B 2000$1483 = 1!349 s 2.43 s
Time period of negative pressure at B 600$1483 = 0!405 s 2.83 sTime period of static pressure at B 2000$1483 = 1!349 s 4.18 sTime period of high pressure at B 600$1' 483 = 0!405 s 4.59 sTime period of static pressure atB 2000$1483 = 1!349 s 5.94 s
Results are plotted below:
200 kPa
100 kPa
0
0 1 2 3 4 5
536
200 kPa
100 kPa
500 m 1,000 m0
Figure 1:
At P = 1!5 s high pressure wave will have travelled to reservoir and static wave willbe travelling toward valve.
Time period for wave to reach reservoir = 1300$1483 = 0!877 s. Then static wavewill have travelled for 1!5 " 0!877 s = 0!623 s. Distance static wave has travelled= 0!623 s ×1' 483 m/s = 924 m. The pressure vs. position plot is shown below:
537
PROBLEM 6.97
Situation: A water hammer phenomenon occurs in a steel pipe–additional detailsare provided in the problem statement.
Find: (a) The initial discharge.(b) Length from I to D!
ANALYSIS
Z = 1483 m/s
!% = #!;Z
P = 2$Z
2 = PZ = 1!46 s × 1' 483 = 2165 m
!; = !%$#Z
= (2!5" 0!2)× 106 Pa$1!483× 106 kg/m2s = 1!551 m/s
] = ;I = 1!551× 0$4 = 1.22 m3/s
538
PROBLEM 6.98
Situation: Water is discharged from a slot in a pipe–additional details are providedin the problem statement.
Find: Reaction (Force and Moment) at station I"I
APPROACH
Apply the momentum principle and the moment of momentum principle.
ANALYSIS
y
x
Plan View
;3 = "(3!1 + 3E) m/s
Momentum principle (?-direction)
XH3 =
Z;3#v · dA
H3 = "Z 143
043
(3!1 + 3E)× 1' 000× (3!1 + 3E)× 0!015AE = "465 N
"3 = 465 N
Flow rate
] =
Z;AI = 0!015
Z 143
043
(3!1 + 3E)AE = 0!0825 m3/s
;1 = ]$I = 0!0825$(0 × 0!042) = 16!4 m/s
Momentum principle (R-direction)
XH; = " /1;1
H; " %=I= ".( = " /;1H; = 30' 000× 0 × 0!042 + 0!08× 0 × 0!042 × 9' 810+1!3× 0 × 0!0252 × 9' 810 + 1000× 0!0825× 16!4
= 1530 N
"; = "1530 N
539
Moment-of-momentum (R"direction)
&; =
Z
1&
3;#v · dA
= 15
Z 143
043
(3!1 + 33)23A3 = 413!2 N ·m
Moment-of-momentum (?-direction)
&3 +.31" = 0
where .=weight, 31"=distance to center of mass
&3 = "1!30 × 0!0252 × 9810× 0!65 = "16!28 N ·m
Net reaction at A-A
F = (465j" 1530k)N
T = (16!3j" 413k)N · m
540
PROBLEM 6.99
Situation: Water ows out a pipe with two exit nozzles–additional details are pro-vided in the problem statement.
30o
1
2
3
Find: Reaction (Force and Moment) at section 1.
APPROACH
Apply the continuity equation, then the momentum principle and the moment ofmomentum principle.
ANALYSIS
Continuity principle equation
;1 = (0!1× 50 + 0!2× 50)$0!6 = 25 ft/s
Momentum equation (E-direction)
XH$ = /3;3$ + /2;2$
H$ = "20× 144× 0!6" 1!94× 252 × 0!6 + 1!94× 502 × 0!2+1!94× 502 × 0!1× cos 60! = "1,243 lbf
Momentum equation (?-direction)
XH3 = /2;23
H3 = 1!94× 50× 50× 0!1× cos 30! = 420 lbf
Moment-of-momentum (R"direction)
32 /2;23 = (36$12)(1!94× 0!1× 50)50 sin 60! = 1260 ft-lbf
Reaction at section 1
F = (1243i" 420j)lbf
M = ("1260k) ft-lbf
541
PROBLEM 6.100
Situation: Water ows out a pipe with two exit nozzles–additional details are pro-vided in the problem statement.
2 y
x3
30o
Find: Reaction (Force and Moment) at section 1.
APPROACH
Apply the continuity principle, then the momentum principle and the moment ofmomentum principle.
ANALYSIS
Continuity principle equation
,1 = (0!01× 20 + 0!02× 20)$0!1 = 6 m/s
Momentum equation (E-direction)
XH$ =
X/!;!$ "
X/#;#$
H$ + %1I1 = /3;3 + /2;2 cos 30" /1;1
H$ = "200' 000× 0!1" 1000× 62
×0!1 + 1000× 202 × 0!02+1000× 202 × 0!01× cos 30!
= -12,135 N
Momentum equation (?-direction)
H3 ". = /2;2 sin 30!
Weight
. = .H2O +.pipe
= (0!1)(1)(9810) + 90
= 1071 N
542
thus
H3 = 1000× 202 × 0!01× sin 30! + 1' 071
= 3071 N
Moment-of-momentum (R"direction)
+; ".31" = 32 /2;23
+; = (1071× 0!5) + (1!0)(1000× 0!01× 20)(20 sin 30!)= 2535 N ·m
Reaction at section 1
F = (12!1i" 3!1j) kN
M = ("2!54k) kN · m
543
PROBLEM 6.101
Situation: A reducing pipe bend held in place by a pedestal. Water ow. No forcetransmission through the pipe at sections 1 and 2.Assume irrotational ow. Neglect weight
1
22 ft
y
x
thus
H$ = "2' 880× 0!196" 2' 471× 0!0873" 3!875(10!19 + 22!92) = "909!6 lbf
Moment-of-momentum (R"direction)
/; " 3%1I1 + 3%2I2 = "3 /;2 + 3 /;1/; = 3(%1I1 " %2I2)" 3 /(;2 " ;1)
where 3 = 1!0 ft.
+; = 1!0(2' 880× 0!196" 2' 471× 0!08753)" 1!0× 3!875(22!92" 10!19)= 300!4 ft-lbf
Moment-of-momentum (?-direction)
+3 + %1I133 + %2I233 = "33 /;2 " 33 /1;1
where 33 = 2!0 ft.
+3 = "33[%1I1 + %2I2 + /(;1 + ;2)]
= "2!0× 909!6+3 = "1819 ft-lbf
Net force and moment at 3
F = "910i lbf
M = ("1820j+ 300k) ft-lbf
545
PROBLEM 6.102
Situation: Arbitrary contol volume with length !9!
Find: Derive Euler’s equation using the momentum equation.
ANALYSIS
v
pA
"s
p
W= A s% !
$1
2(p + p )/21 2
Continuity equationA
AP
Z#A, + /! " /# = 0
For a control volume that is xed in spaceZ[#
[PA, + /! " /# = 0
For the control volume shown above the continuity equation is expressed as
[#
[PI!9+ (#;I)2 " (#;I)1 = 0
where I is the average cross-sectional area between 1 and 2 and the volume of thecontrol volume is I!9! Dividing by !9 and taking the limit as !9$ 0 we have
I[#
[P+[
[9(#;I) = 0
In the limit the average area becomes the local area of the stream tube.
The momentum equation for the control volume is
XH& =
A
AP
Z#;A, + /!;! " /#;#
For a control volume xed in space, the accumulation term can be written as
A
AP
Z#;A, =
Z[
[P(#;)A,
546
The forces are due to pressure and weight
XH& = %1I1 " %2I2 + (
%1 + %22
)(I2 "I1)" (I!9 sin K
where the third term on the right is the pressure force on the sloping surface and K isthe orientation of control volume from the horizontal. The momentum equation forthe control volume around the stream tube becomes
[
[P(#;)I!9+ #I;2;2 " #I;1;1 = (%1 " %2)I" (I!9 sin K
Dividing by !9 and taking limit as !9$ 0' we have
I[
[P(#;) +
[
[9(#I;2) = "
[%
[9I" (I sin K
By di!erentiating product terms the left side can be written as
I[
[P(#;) +
[
[9(#I;2) = ;[I
[#
[P+[
[9(#;I)] +I#
[;
[P+I#;
[;
[9
The rst term on the right is zero because of the continuity equation. Thus themomentum equation becomes
#[;
[P+ #;
[;
[9= "
[%
[9" ( sin K
But sin K = [R$[9 and [;$[P + ;[;$[9 = C&' the acceleration along the path line.Thus the equation becomes
#C& = "[
[9(%+ (R)
which is Euler’s equation.
547
PROBLEM 6.103
Situation: A helicopter rotor uses two small rockets motors–details are provided inthe problem statement.
Find: Power provided by rocket motors.
APPROACH
Apply the momentum principle. Select a control volume that encloses one motor,and select a stationary reference frame.
ANALYSIS
Velocity analysis
;# = 0
,# = 3Y
= 3!5× 20= 21!991 m$ s
,0 = 500 m$ s
;0 = (500" 21!99) m$ s= 478!01m$ s
Flow rate
/ = #I#,#
= 1!2× !002× 21!991= 0!05278 kg/s
Momentum principle (E-direction)
H$ = /;0 " /;#
= /;0
= 0!05278× 478= 25!23 N
Power
* = 2H3Y
= 2× 25!23× 3!5× 20= 1110W
* = 1!11 kW
548
PROBLEM 6.104
Situation: A rotating lawn sprinkler is to be designed.The design target is 0.25 in. of water per hour over a circle of 50-ft radius.
Find: Determine the basic dimensions of the lawn sprinkler.
Assumptions:1.) The Bernoulli equation applies.2.) Assume mechanical friction is present.
APPROACH
Apply the momentum principle.
ANALYSIS
Flow rate. To supply water to a circle 50 ft. in diameter at a 1/4 inch per hourrequires a discharge of
] = MI
= (1$48)0(502$4)$3600
= 0!011 cfs
Bernoulli equation. Assuming no losses between the supply pressure and the sprinklerhead would give and exit velocity at the head of
, =
r2%
#
=
r2× 50× 144
1!94= 86 ft/s
If the water were to exit the sprinkler head at the angle for the optimum trajectory(45!), the distance traveled by the water would be
9 =, 2G2)
The velocity necessary for a 25 ft distance (radius of the spray circle) would be
, 2G = 2)9 = 2× 32!2× 25 = 1610,G = 40 ft/s
This means that there is ample pressure available to do the design. There will belosses which will a!ect the design. As the water spray emerges from the spray head,
549
atomization will occur which produces droplets. These droplets will experience aero-dynamic drag which will reduce the distance of the trajectory. The size distributionof droplets will lead to small droplets moving shorted distances and larger dropletsfarther which will contribute to a uniform spray pattern.
The sprinkler head can be set in motion by having the water exit at an angle withrespect to the radius. For example if the arm of the sprinkler is 4 inches and theangle of deection at the end of the arm is 10 degrees, the torque produced is
+ = #]3,G sin K
= 1!94× 0!011× 40× sin 10= 0!148 ft-lbf
The downward load on the head due to the discharge of the water is
H3 = #],G sin 45
= 1!94× 0!011× 40× sin 45= 0!6 lbf
The moment necessary to overcome friction on a at plate rotating on another atplate is
+ = (2$3)7H:3!
where 7 is the coe"cient of friction and 3! is the radius of the plate. Assuming a 1/2inch radius, the limiting coe"cient of friction would be
7 =3
2
+
H:3!
=3
2
0!148
0!6× (1$24)= 8!9
This is very high, which means there is adequate torque to overcome friction.
These are initial calculations showing the feasibility of the design. A more detaileddesign would now follow.
550
PROBLEM 6.105
Following the same development in the text done for the planar case, there will beanother term added for the two additional faces in the R-direction. The rate of changeof momentum in the control volume plus the net e#ux through the surfaces becomes
1
!E!?!R
Z
1@
[
[P(#@)A, +
#uu$+!$*2 " #uu$"!$*2!E
+#@;3+!3*2 " #@;3"!3*2
!?+#@Y;+!;*2 " #@Y;"!;*2
!R
where Y is the velocity in the R"direction and !R is the size of the control volumein the R"direction. Taking the limit as !E' !?' and !R $ 0 results in
[
[P(#@) +
[
[E(#uu) +
[
[?(#@;) +
[
[R(#@Y)
In the same way, accounting for the pressure and shear stress forces on the three-dimensional control volume leads to an additional shear stress term on the R-face.There is no additional pressure force because there can only be a force due to pressureon the faces normal to the E-direction. The force terms on the control volume become
%$"!$*2 " %$+!$*2!E
+B$$ |$+!$*2 "B$$ |$"!$*2
!E
+B 3$ |3+!3*2 "B 3$ |3"!3*2
!?+B ;$ |;+!;*2 "B ;$ |;"!;*2
!R
Taking the limit as !E' !?' and !R $ 0 results in
"[%
[E+[B$$[E
+[B 3$[?
+[B ;$[R
The body force in the E-direction is
#)$!V–!E!?!R
= #)$
551
PROBLEM 6.106
Substituting in the constitutive relations gives
[B$$[E
+[B 3$[?
+[B ;$[R
= 27[2@
[E2+ 7
[
[?([@
[?+[;
[E) + 7
[
[R([@
[R+[Y
[E)
This can be written as
[B$$[E
+[B 3$[?
+[B ;$[R
= 7([2@
[E2+[2@
[?2+[2@
[R2) + 7
[
[E([@
[E+[;
[?+[Y
[R)
The last term is equal to zero from the Continuity principle equation for an incom-pressible ow, so
[B$$[E
+[B 3$[?
+[B ;$[R
= 7([2@
[E2+[2@
[?2+[2@
[R2)
552
PROBLEM 7.1
Situation: An engineer is estimating power for a water pik.Water jet diameter is A = 1$8 in! = 3!175mm. Exit speed is ,2 = 40m$ s.
Find: Estimate the minimum electrical power in watts.
Properties: At 10 !C' density of water is # = 1000 kg$m3!
Assumptions: 1.) Neglect all energy losses in the mechanical system—e.g. motor,gears, and pump.2.) Neglect all energy losses in the uid system—that is, neglect losses associated withviscosity.3.) Neglect potential energy changes because these are very small.4.) Assume the velocity distribution in the water jet is uniform (T = 1) !
APPROACH
In the water pik, electrical energy is converted to kinetic energy of the water. Balanceelectrical power with the rate at which water carries kinetic energy out of the nozzle.
ANALYSIS
Power =Amount of kinetic energy that leaves the nozzle
Each interval of time
=!/
? 222
!P
where!/ is the mass that has owed out of the nozzle for each interval of time (!P) !Since the mass per time is mass ow rate: (!/$!P = / = #I2,2)
Power =/, 222
=#I2,
32
2
553
Exit area
I2 = 0$4ס3!175× 10"3m
¢2
= 7!917× 10"6m2
Thus!
Power =(1000 kg$m3) (7!917× 10"6m2) (40m$ s)3
2
Power = 253W
COMMENTS
Based on Ohm’s law, this device would draw about 2 amps on a standard householdcircuit.
554
PROBLEM 7.2
Situation: A turbine is described in the problem statement.
Find: Power output.
APPROACH
Apply the energy principle.
ANALYSIS
Energy principle
]" .& = /[(M2 " M1) + (, 22 " ,21 )$2]
"10" .& = 4' 000[(2' 621" 3' 062) + (502 " 102)$(2× 1' 000)] kJ/hr.& = 489 kW
555
PROBLEM 7.3
Situation: A small wind turbine is being developed.Blade diameter is 1 = 1!0m! Design wind speed is , = 15 mph = 6!71m$ s!Air temperature is & = 50 !F = 10 !C. Atmospheric pressure is % = 0!9 bar = 90 kPa.Turbine e"ciency is g = 20%!
Find: Power (* ) in watts that can be produced by the turbine.
APPROACH
Find the density of air with the idea gas law. Then, nd the kinetic energy of thewind and use 20% of this value to nd the power that is produced.
ANALYSIS
Ideal gas law
# =%
"&
=90' 000Pa
(287 J$ kg · K) (10 + 273) K= 1!108 kg$m3
ANALYSIS
Rate of KE =Amount of kinetic energy
Interval of time
=!/, 2$2
!P
556
where !/ is the mass of air that ows through a section of area I = 012$4 foreach unit of time (!P) ! Since the mass for each interval of time is mass ow rate:(!/$!P = / = #I, )
Rate of KE =/, 2
2
=#I, 3
2
The area is I2 = 0$4× (1!0m)2 = 0!785m2
Rate of KE =(1!103 kg$m3) (0!785m2) (6!71m$ s)3
2
Rate of KE = 130!9W
Since the output power is 20% of the input kinetic energy
* = (0!2) (130!9W)
* = 26!2W
COMMENTS
The amount of energy in the wind is di!use (i.e. spread out). For this situation,a wind turbine that is 1 m in diameter in a moderately strong wind (15 mph) onlyprovides enough power for approximately one 25 watt light bulb.
557
PROBLEM 7.4
Situation: A compressor is described in the problem statement.
Find: Power required to operate compressor.
APPROACH
Apply the energy principle.
ANALYSIS
Energy principle
. = ]+ /(, 21 $2" ,22 $2 + M1 " M2)
The inlet kinetic energy is negligible so
. = /(", 22 $2 + M1 " M2)= 1!5("2002$2 + 300× 103 " 500× 103)
. = -330 kW
558
PROBLEM 7.5
Situation: Flow through a pipe is described in the problem statement.
Find: (a)Velocity and (b)temperature at outlet.
ANALYSIS
M1 + ,21 $2 = M2 + ,
22 $2 (1)
M1 " M2 = , 22 $2" ,21 $2
/ = #1,1I = (%1$"&1),1I
or&1 = %1,1I$(" /)
where
I = (0$4)× (0!08)2 = 0!00503 m2
M1 " M2 = Z,(&1 " &2) = [Z,%1,1I$(" /)]" [Z,%2,2I$(" /)] (2)
Z,%1I(" /) = 1' 004× 150× 103 × 0!00503$(287× 0!5)= 5' 279 m/s
andZ2%2I$(" /) = (100$150)× (5' 279) = 3' 519 m/s
,1 = /$#1I
where#1 = 150× 10
3$(287× 298) = 1!754 kg/m3
Then,1 = 0!50$(1!754× 0!00503) = 56!7 m/s (3)
Utilizing Eqs. (1), (2) and (3), we have
56!7× 5' 279" 3' 519,2 = (, 22 $2)" (56!72$2) (4)
Solving Eq. (4) yields ,2 = 84!35 m/s
Z,(&1 " &2) = (84!352 " 56!72)$2 = 1' 950 m2/s2
&2 = &1 " (1' 950$Z,)= 20!C" 1' 905$1' 004
&2 = 18.1!C
559
PROBLEM 7.6
Situation: A hypothetical velocity distribution in a pipe is described in the problemstatement.
Find:(a) Kinetic energy correction factor: T(b)Mean velocity in terms of ,max!
ANALYSIS
Denition of average velocity
, =1
I
Z
=
, (3)AI
Velocity prole
, (3) = ,max " 0!5,max3
30
, (3) = ,max(1" 0!53
30)
Then
, =
µ,max0320
¶Z K0
0
µ1"
3
230
¶203A3
=
µ20,max0320
¶Z K0
0
µ3 "
32
230
¶A3
=
µ20,max0320
¶µ32!2"33!630
¶
= , = 23,max
Kinetic energy correction factor
T =
µ1
0320
¶Z K0
0
!
"
³1" K
2K0
´,max
23,max
#
$3
203A3
=
µ2
320
¶µ3
2
¶3 Z K0
0
µ1"
3
230
¶33A3
560
Performing the integration (we used the computer program Maple)
T =351
320
orT = 1! 097
561
PROBLEM 7.7
Situation: A hypothetical velocity distribution in a rectangular channel is describedin the problem statement.
Find: Kinetic energy correction factor: T
ANALYSIS
, = ,max$2 and , = ,max?$A
Kinetic energy correction factor
T = (1$A)
Z A
0
(,max?$((,max$2)A))3A?
= (1$A)
Z A
0
(2?$A)3A?
T = 2
562
PROBLEM 7.8
Situation: Velocity distributions (a) through (d) are described in the problem state-ment.
Find: Indicate whether T is less than, equal to, or less than unity.
ANALYSIS
a) T = 1!0 ; b) T F 1!0 ; c) T F 1!0 ; d) T F 1!0
563
PROBLEM 7.9
Situation: A velocity distribution is shown in case (c) in problem 7.8.
Find: Kinetic energy correction factor: T
ANALYSIS
Kinetic energy correction factor
T = (1$I)
Z
=
(,$, )3AI
Flow rate equation
, = ," " (3$30),", = ,"(1" (3$30))
] =
Z, AI
=
Z K0
0
, (203A3)
=
Z K0
0
,"(1" 3$30)203A3
= 20,"
Z K0
0
[3 " (32$30)]A3
Integrating yields
] = 20,"[(32$2)" (33$(330))]K00
] = 20,"[(1$6)320]
] = (1$3),"I
Thus, = ]$I = ,"$3
Kinetic energy correction factor
T = (1$I)
Z K0
0
[,"(1" 3$30)$((1$3),")]3203A3
= (540$0320)
Z K0
0
(1" (3$30))33A3
T =2.7
564
PROBLEM 7.10
Situation: A velocity distribution is shown in case (d) in problem 7.8.
Find: Kinetic energy correction factor: T
ANALYSIS
Flow rate equation
, = c3
] =
Z K0
0
, (203A3)
=
Z K0
0
20c32A3
= 20c330$3
, = ]$I
= ((2$3)c0330)$0320
= 2$3 c 30
Kinetic energy correction factor
T = (1$I)
Z
=
(,$, )3AI
T = (1$I)
Z K0
0
(c3$(2$3 c30))3203A3
T = ((3$2)320$(0320))
Z K0
0
(3$30)33A3
T = ((27$4)$320)(350$(53
30))
T = 27/20
565
PROBLEM 7.11
Situation: The kinetic energy correction factor for ow in a pipe is 1.08.
Find: Describe the ow (laminar or turbulent).
ANALYSIS
b) turbulent
566
PROBLEM 7.12
Situation: The velocity distribution in a pipe is described in the problem statement.
Find: Derive formula for kinetic energy correction factor as a function of Q.
ANALYSIS
Flow rate equation
@$@max = (?$30): = ((30 " 3)$30): = (1" 3$30):
] =
Z
=
@AI
=
Z K0
0
@max(1" 3$30):203A3
= 20@max
Z K0
0
(1" 3$30):3A3
Upon integration] = 20@max3
20[(1$(Q+ 1))" (1$(Q+ 2))]
Then
, = ]$I = 2@max[(1$(Q+ 1))" (1$(Q+ 2))]= 2@max$[(Q+ 1)(Q+ 2)]
Kinetic energy correction factor
T =1
I
Z K0
0
[@max(1" 3$30):$(2@max$((Q+ 1)(Q+ 2)))]3203A3
Upon integration one gets
C = (1$4)[((Q+ 2)(Q+ 1))3$((3Q+ 2)(3Q+ 1))]
If Q = 1$6, then
T = (1$4)[((1$6 + 2)(1$6 + 1))3$((3× 1$6 + 2)(3× 1$6 + 1))]T = 1!077
567
PROBLEM 7.13
Situation: The velocity distribution in a pipe is described in the problem statement.
@$@max = (?$A):
Find: Derive formula for kinetic energy correction factor.
ANALYSIS
Solve for ^ rst in terms of @max and A
^ =
Z A
0
@A? =
Z A
0
@max(?$A):A? = @max$A
:
Z A
0
?:A?
Integrating:
^ = (@max$A:)[?:+1$(Q+ 1)]A0
= @maxA:+1A":$(Q+ 1)
= @maxA$(Q+ 1)
Then@ = ^$A = @max$(Q+ 1)
Kinetic energy correction factor
T = (1$I)
Z
=
(@$@)3AI
= 1$A
Z A
0
[@max(?$A):$(@max$(Q+ 1))]
3A?
= ((Q+ 1)3$A3:+1)
Z A
0
?3:A?
Integrating
T = ((Q+ 1)3$A3:+1)[A3:+1$(3Q+ 1)]
= (Q+ 1)3$(3Q+ 1)
When Q = 1$7
T = (1 + 1$7)3$(1 + 3$7)
T = 1.045
568
PROBLEM 7.14
Situation: Flow though a pipe is described in the problem statement.
Find: Kinetic energy correction factor: T.
ANALYSIS
Kinetic energy correction factor
T =1
I
Z
=
µ,
,
¶3AI
The integral is evaluated using
Z
=
µ,
,
¶3AI '
1
, 3
X
#
0(32# " 32#"1)(
;# + ;#"12
)3
The mean velocity is 24.32 m/s and the kinetic energy correction factor is 1.187.
569
PROBLEM 7.15
Situation: Water ows from a pressurized tank, through a valve and out a pipe.
Section 1 (air/water interface in tank): %1 = 100 kPa, R1 = 12m.Section 2 (pipe outlet): %2 = 0kPa' R2 = 0m, ,2 = 10m$ s!Head loss for the system depends on a minor loss coe"cient (<E) ! The equation forhead loss is:
ME = <E, 2
2)
Find: Find the value of the minor loss coe"cient (<E) !
Properties: Water @ 15 !C from Table A.5: ( = 9800N$m3!
Assumptions: 1.) Assume steady ow.2.) Assume the outlet ow is turbulent so that T2 = 1!0!3.) Assume water temperature is 15 !C.4.) Assume the velocity at section 1 is negligible—that is ,1 % 0!
APPROACH
Apply the energy equation to a control volume surrounding the water. Analyze eachterm and then solve the resulting equation to nd the minor loss coe"cient.
ANALYSIS
Energy equation
%1(+ T1
, 212)+ R1 + M, =
%2(+ T2
, 222)+ R2 + M5 + ME (1)
Analyze each term:
• At the inlet. %1 = 100 kPa, ,1 % 0, R1 = 12m
• At the exit , %2 = 0kPa' ,2 = 10m$ s' T2 = 1!0.
• Pumps and turbines. M, = M5 = 0
570
• Head loss. ME = <E? 2
2D
Eq. (1) simplies to
%1(+ R1 = T2
, 222)+<E
, 222)
(100' 000Pa)
(9800N$m3)+ 12m =
(10m$ s)2
2 (9!81m$ s2)+<E
(10m$ s)2
2 (9!81m$ s2)
22!2m = (5!097m) +<E (5!097m)
Thus<E = 3!35
COMMENTS
1. The minor loss coe"cient (<E = 3!35) is typical of a valve (this information ispresented in Chapter 10).
2. The head at the inlet³,1R+ R1 = 22!2m
´represents available energy. Most of
this energy goes to head loss³<E
? 222D= 17!1m
´! The remainder is carried as
kinetic energy out of the pipe³T2
? 222D= 5!1m
´!
571
PROBLEM 7.16
Situation: Water owing from a tank is described in the problem statement.
Find: Pressure in tank.
APPROACH
Apply the energy equation from the water surface in the tank to the outlet.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 + ME
%1$( = , 22 $2) + ME " R1 = 6,22 $2) " 10
,2 = ]$I2 = 0!1$((0$4)(1$12)2) = 18!33 ft/s
%1$( = (6(18!332)$64!4)" 10 = 2!13 ft%1 = 62!4× 21!3 = 1329 psfg
%1 = 9.23 psig
572
PROBLEM 7.17
Situation: A pipe draining a tank is described in the problem statement.
Find: Pressure at point I and velocity at exit.
Assumptions: T2 = 1
APPROACH
To nd pressure at point A, apply the energy equation between point A and the pipeexit. Then, then apply energy equation between top of tank and the exit.
ANALYSIS
Energy equation (point A to pipe exit).
%=(+ R= + T=
, 2=2)+ M, =
%2(+ R2 + T2
, 222)+ M5 + ME
Term by term analysis: ,= = ,2 (continuity); %2 = 0-gage; (R= " R>) = ?; M, = 0'M5 = 0' ME = 0! Thus
%= = "(?= "62!4× 4
%= = -250 lb/ft2
Energy equation (top of tank and pipe exit)
%1$( + T1,21 $2) + R1 + M, = %2$( + T2,
22 $2) + R2 + M5 + ME
R1 = , 22 $2) + R2
,2 =p2)(R1 " R2)
=&2× 32!2× 14,2 = 30.0 ft/s
573
PROBLEM 7.18
Situation: A pipe draining a tank is described in the problem statement.
Find: Pressure at point I and velocity at the exit.
Assumptions: T1 = 1!
APPROACH
To nd pressure at point A, apply the energy equation between point A and the pipeexit. Then, then apply energy equation between top of tank and the exit.
ANALYSIS
Energy equation
%=(+ R= + T=
, 2=2)+ M, =
%2(+ R2 + T2
, 222)+ M5 + ME
Term by term analysis: ,= = ,2 (continuity); %2 = 0-gage; (R= " R>) = ?; M, = 0'M5 = 0' ME = 0! Thus
%= = "(?%= = "
¡9810N$m3
¢(2m)
%= = "19!6 kPa
Energy equation
%1$( + T1,21 $2) + R1 + M, = %2$( + T2,
22 $2) + R2 + M5 + ME
R1 = , 22 $2) + R2
,2 =p2)(R1 " R2)
=&2× 9!81× 10,2 = 14.0 m/s
574
PROBLEM 7.19
Situation: Flow through a pipe is described in the problem statement.
Find: Pressure di!erence between I and D!
ANALYSIS
Flow rate equation
,= = ]$I1
= 1!910m/s
,> =
µ20
12
¶2× ,=
= 5!31 m/s
Energy equation
%= " %> = 1( + (#$2)(, 2> " ,2=) ;
%= " %> = 1× 9810× 0!9 + (900$2)(5!312 " 1!912)
= 19.88 kPa
575
PROBLEM 7.20
Situation: Water owing from a tank is described in the problem statement.
Find: Discharge in pipe.
Assumptions: T = 1.
APPROACH
Apply the energy equation from the water surface in the reservoir (pt. 1) to the outletend of the pipe (pt. 2).
ANALYSIS
Energy equation%1(+, 212)+ R1 =
%2(+, 222)+ R2 + ME
Term by term analysis:
%1 = 0; %2 = 0
R2 = 0; ,1 ' 0
The energy equation becomes.
R1 =, 222)+ ME
11m =, 222)+ 5
, 222)= 6
, 222)
, 22 =
µ2)
6
¶(11)
,2 =
sµ2× 9!81m$ s2
6
¶(11m)
,2 = 5!998 m/s
Flow rate equation
] = ,2I2
= (5!998m$ s)¡9 cm2
¢µ10"4m2cm2
¶
= 5! 398 2× 10"3m3
s
] = 5!40× 10"3 m3$ s
576
PROBLEM 7.21
Situation: An engineer is estimating the power that can be produced by a smallstream.Stream discharge: ] = 1!4 cfs. Stream temperature: & = 40 !F.Stream elevation: 4 = 34 ft above the owner’s residence!
Penstock
Turbine & Generato
H
Find: Estimate the maximum power in kilowatts that can be generated.(a) The head loss is 0.0 ft, the turbine is 100% e"cient and the generator is 100%e"cient.(b) The head loss is 5.5 ft, the turbine is 70% e"cient and the generator is 90%e"cient.
APPROACH
To nd the head of the turbine (Mt), apply the energy equation from the upper watersurface (section 1) to the lower water surface (section 2). To calculation power,use * = g( /)Mt)' where g accounts for the combined e"ciency of the turbine andgenerator.
ANALYSIS
Energy equation
%1(+ T1
, 212)+ R1 =
%2(+ T2
, 222)+ R2 + M5 + ME (1)
Term by term analysis
%1 = 0; ,1 % 0%2 = 0; ,2 % 0
R1 " R2 = 4
Eq. (1) becomes
4 = Mt + ME
Mt = 4 " ME
Flow rate
/) = (]
=¡62!4 lbf$ ft3
¢ ¡1!4 ft3$ s
¢
= 87!4 lbf$ s
577
Power (case a)
* = /)M5
= /)4
= (87!4 lbf$ s) (34 ft) (1!356 J/ ft · lbf)= 4!02 kW
Power (case b).
* = g /) (4 " ME)= (0!7)(0!9) (87!4 lbf$ s) (34 ft" 5!5 ft) (1!356 J/ ft · lbf)= 2!128 kW
Power (case a) = 4.02 kW
Power (case b) = 2.13 kW
COMMENTS
1. In the ideal case (case a), all of the elevation head is used to make power.When typical head losses and machine e"ciencies are accounted for, the powerproduction is cut by nearly 50%.
2. From Ohm’s law, a power of 2.13 kW will produce a current of about 17.5 ampsat a voltage of 120V. Thus, the turbine will provide enough power for about1 typical household circuit. It is unlikely the turbine system will be practical(too expensive and not enough power for a homeowner).
578
PROBLEM 7.22
Situation: Flow in a pipe is described in the problem statement.
Find: Pressure at station 2.
APPROACH
Apply ow rate equation and then the energy equation.
ANALYSIS
Flow rate equation
,1 =]
I1=
6
0!8= 7!5 ft/s
, 212)
= 0!873 ft
,2 =]
I2=
6
0!2= 30 ft/s
, 222)
= 13!98 ft
Energy equation
%1(+, 212)+ R1 =
%2(+, 222)+ R2 + 6
15× 1440!8× 62!4
+ 0!873 + 12 =%2(+ 13!98 + 0 + 6
%2(
= 36!16 ft
%2 = 36!16× 0!8× 62!4= 1185 psfg
%2 = 8!23 psig
579
PROBLEM 7.23
Situation: Water owing from a tank is described in the problem statement.
Find: (a) Discharge in pipe(b) Pressure at point B.
Assumptions: ( = 9810 N/m
APPROACH
Apply the energy equation.
ANALYSIS
Energy equation
%reser.$( + ,2K $2) + RK = %outlet$( + ,
20 $2) + R0
0 + 0 + 5 = 0 + , 20 $2)
,0 = 9!90 m/s
Flow rate equation
] = ,0I0
= 9!90× (0$4)× 0!202
] = 0!311 m3/s
Energy equation from reservoir surface to point B:
0 + 0 + 5 = %>$( + ,2>$2) + 3!5
where
,> = ]$,> = 0!311$[(0$4)× 0!42] = 2!48 m/s, 2>$2) = 0!312 m
%>$( " 5" 3!5 = 0!312
%> = 11!7 kPa
580
PROBLEM 7.24
Situation: A microchannel is described in the problem statement.
Find: Pressure in syringe pump.
APPROACH
Apply the energy equation and the ow rate equation.
ANALYSIS
Energy equation
%1(
= ME + T2, 2
2)
=3272,
(12+ 2
, 2
2)(1)
Flow rateThe cross-sectional area of the channel is 3.14×10"8 m2! A ow rate of 0.1 7l/s is10"7 l/s or 10"10 m3/s. The ow velocity is
, =]
I
=10"10
3!14× 10"8= 0!318× 10"2 m/s= 3!18 mm/s
Substituting the velocity and other parameters in Eq. (1) gives
%1(
=32× 1!2× 10"3 × 0!05× 0!318× 10"2
7' 850× 4× (10"4)2+ 2×
(0!318× 10"2)2
2× 9!81= 0!0194 m
The pressure is
%1 = 799 kg/m3 × 9!81 m/s2 × 0!0194 m
%1 =152.1 Pa
581
PROBLEM 7.25
Situation: A re hose is described in the problem statement.
Find: Pressure at hydrant.
APPROACH
Apply the energy equation.
ANALYSIS
Energy equation
%1(+ R1 =
, 222)+ R2 + ME
where the kinetic energy of the uid feeding the hydrant is neglected. Because of thecontraction at the exit, the outlet velocity is 4 times the velocity in the pipe, so theenergy equation becomes
%1(
=, 222)+ R2 " R1 + 10
, 2
16× 2)
%1 =
µ1!625
2), 2 + 50
¶(
=
µ1!625
2× 9!81× 402 + 50
¶9810
= 1! 791× 106 Pa
%1 = 1790 kPa
582
PROBLEM 7.26
Situation: A siphon is described in the problem statement.
Find: Pressure at point D!
ANALYSIS
Flow rate equation
,1 = ]$I2
,1 = 2!8$((0$4)× (8$12)2)= 8!02 ft/s
Energy equation (from reservoir surface to -)
%1$( + ,21 $) + R1 = %1$( + ,
21 $2) + R1 + ME
0 + 0 + 3 = 0 + 8!022$64!4 + 0 + ME
ME = 2!00 ft
Energy equation (from reservoir surface to D).
0 + 0 + 3 = %>$( + ,2>$2) + 6 + (3$4)× 2 ; ,> = ,) = 8!02 ft/s
%>$( = 3" 1" 6" 1!5 = "5!5 ft%> = "5!5× 62!4
= "343 psfg%> = -2.38 psig
583
PROBLEM 7.27
Situation: Flow though a pipe is described in the problem statement.
Find: Force on pipe joint.
APPROACH
Apply the momentum principle, then the energy equation.
ANALYSIS
xVx
p =02
Fj
p A1 1
Momentum Equation
XH$ = /,!I$ " /,#I$
HV + %1I1 = "#, 2$I+ #,2$I
HV = "%1I1
Energy equation
%1(+, 212)+ R1 =
%2(+, 222)+ R2 + ME
%1 " %2 = (ME%1 = ((3) = 187!2 psfg
HV = "187!2× (9
144)
HV = "11!7 lbf
584
PROBLEM 7.28
Situation: A siphon is described in the problem statement.
Find:a.) Discharge.b.) Pressure at point D!
APPROACH
Apply the energy equation from A to C, then from A to B.
ANALYSIS
Head loss
M<pip e =, 2,2)
Mtotal = M<pip e + M<outlet = 2, 2,2)
Energy equation (from A to C)
0 + 0 + 30 = 0 + 0 + 27 + 2, 2,2)
,, = 5!42 m/s
Flow rate equation
] = ,,I,
= 5!42× (0$4)× 0!252
] = 0!266 m3/s
Energy equation (from A to B)
30 =%>(+, 2,2)+ 32 + 0!75
, 2,2)
%>(
= "2" 1!75× 1!497 m
%> = "45!3 kPa, gage
585
PROBLEM 7.29
Situation: A siphon is described in the problem statement.
Find: Depth of water in upper reservoir for incipient cavitation.
APPROACH
Apply the energy equation from point A to point B.
ANALYSIS
Flow rate equation
, = ]$I
=8× 10"4 m3/s1× 10"4 m2
= 8m$ s
Calculations
, 2$2) = 82$(2× 9!81) = 3!262 mMEI=#> = 1!8, 2$2) = 5!872 m
Energy equation (from A to B; let R = 0 at bottom of reservoir)
%=$( + ,2=$2) + R= = %>$( + ,
2>$2) + R> + ME
100' 000$9' 810 + 0 + R= = 1' 230$9' 810 + 3!262 + 10 + 5!872
R= = depth = 9.07m
586
PROBLEM 7.30
Situation: Flow though a pipe is described in the problem statement.
Find: Direction of ow.
Assumptions: Assume the ow is from A to B.
APPROACH
Apply the energy equation from A to B.
ANALYSIS
Energy equation
%=$( + ,2=$2) + R= = %>$( + ,
2>$) + R> + ME
(10' 000$9' 810) + 10 = (98' 100$9' 810) + 0 + ME
ME = 1!02 + 10 = 10!0
= +1!02
Because the value for head loss is positive it veries our assumption of downwardow. Correction selection is b)
587
PROBLEM 7.31
Situation: A system with a machine is described in the problem statement.
Find: Pressures at points I and D!
Assumptions: Machine is a pump
APPROACH
Apply the energy equation between the top of the tank and the exit, then betweenpoint B and the exit, nally between point A and the exit.
ANALYSIS
Energy equation
R1 + M, =, 222)+ R2
Assuming the machine is a pump. If the machine is a turbine, then M, will be negative.The velocity at the exit is
,2 =]
I2=
10840!52
= 50!93 ft/s
Solving for M, and taking the pipe exit as zero elevation we have
M, =50!932
2× 32!2" (6 + 12) = 22!3 ft
Therefore the machine is a pump.Applying the energy equation between point B and the exit gives
%>(+ R> = R2
Solving for %> we have
%> = ((R2 " R>)%> = "6× 62!4 = "374 psfg
%>=-2.6 psig
Velocity at A
,= =
µ6
12
¶2× 50!93 = 12!73 ft/s
Applying the energy equation between point A and the exit gives
588
%=(+ R= +
, 2=2)=, 222)
so
%= = ((, 222)" R= "
, 2=2))
= 62!4× (50!932 " 12!732
2× 32!2" 18)
= 1233 psfg
%= = 8.56 psig
589
PROBLEM 7.32
Situation: A system is described in the problem statement.
Find: Pressure head at point 2.
ANALYSIS
Let ,: = velocity of jet from nozzle:Flow rate equation
,: =]
I:=
0!10
((0$4)× 0!102)= 12!73 m/s
, 2:2)
= 8!26 m
,2 =]
I2=
0!10
((0$4)× 0!32)= 1!41 m/s
, 222)
= !102 m
Energy equation
%2(+ 0!102 + 2 = 0 + 8!26 + 7
,2R= 13!16 m
590
PROBLEM 7.33
Situation: A pump draws water out of a tank and moves this water to elevation C.Diameter of inlet pipe is 8 in! Diameter of outlet pipe is 1) = 4 in!Speed of water in the 4 in pipe is ,) = 12 ft$ s! Power delivered to the pump is 25 hp!Pump e"ciency is g = 60%! Head loss in pipe (between A & C) is ME = 2, 2)$2)!
Find: Height (M)above water surface.
APPROACH
Apply the energy equation from the reservoir water surface to the outlet.
ANALYSIS
Energy equation
%1(+ T1
, 212)+ R1 + M, =
%2(+ T2
, 222)+ R2 + ME
0 + 0 + 0 + M, = 0 +, 212)+ M+ 2
, 212)
M, = M+ 3, 212)
(1)
Velocity head, 212)=122
64!4= 2!236 ft (2)
Flow rate equation
] = ,)I)
=
µ12 ft
s
¶Ã0 (4$12 ft)2
4
!
= 1!047 ft3$ s
Power equation
* ( hp) =](M,550g
M, =* (550) g
](
=25 (550) 0!6
1!047 (62!4)
= 126!3 ft (3)
591
Substitute Eqs. (2) and (3) into Eq. (1)
M, = M+ 3, 212)
126!3 ft = M+ (3× 2! 236) ftM = 119!6 ft
M = 120 ft
592
PROBLEM 7.34
Situation: A system with pump is described in the problem statement.
Find: Height above water surface.
ANALYSIS
Energy equation
0 + 0 + 0 + M, = 0 + M+ 3!0, 212)
, 2)2)
=32
(2× 9!81)= 0!459 m
* =](M,0!6
M, =25' 000× 0!6
(3× 0$4× 0!102 × 9' 810)= 64!9 m
M = 64!9" 3!0× !459M = 63!5 m
593
PROBLEM 7.35
Situation: A system with pump is described in the problem statement.
Find: Horsepower delivered by pump.
APPROACH
Apply the ow rate equation, then the energy equation from A to B. Then apply thepower equation.
ANALYSIS
Flow rate equation
,= =]
I==
3!0
((0$4)× 12)= 3!82 ft/sec
, 2=2)
= 0!227 ft
,> =]
I>=
3!0
((0$4)× 0!52)= 15!27 ft/s
, 2>2)
= 3!62 ft
Energy equation
%=(+, 2=2)+ R= + M, =
%>(+, 2>2)+ R>
5×144
62!4+ 0!227 + 0 + M, = 60×
144
62!4+ 3!62 + 0
M, = 130!3 ft
Power equation
* (hp) =](M,550
= 3!0× 62!4×130!3
550
* = 44!4 hp
594
PROBLEM 7.36
Situation: A system with pump is described in the problem statement.
Find: Power supplied to ow.
APPROACH
Apply the ow rate equation. Then apply the energy equation from reservoir surfaceto end of pipe. Then apply the power equation.
ANALYSIS
Flow rate equation
, = ]$I
= 8$((0$4)× 12)= 10!2 m/s
Energy equation
%1$( + ,21 $2) + R1 + M, = %2$( + ,
22 $2) + R2 + ME
0 + 0 + 40 + M, = 0 + , 2$2) + 20 + 7, 2$2)
, 2$2) = 10!22$(2× 9!81) = 5!30 m
Then
40 + M, = , 2$2) + 20 + 7, 2$2)
M, = 8× 5!30 + 20" 40= 22!4 m
Power equation
* = ](M,
= 8× 9810× 22!4* = 1!76 MW
595
PROBLEM 7.37
Situation: A system with pump is described in the problem statement.
Find: Power pump must supply.
APPROACH
Apply the ow rate equation, then the energy equation from reservoir surface to the10 m elevation. Then apply the power equation.
ANALYSIS
Flow rate equation
, = ]$I
= 0!25$((0$4)× 0!32)= 3!54 m/s
, 2$2) = 0!639 m
Energy equation
0 + 0 + 6 + M, = 100' 000$9810 + , 2$2) + 10 + 2!0, 2$2)
M, = 10!19 + 10" 6 + 3!0× 0!639M, = 16!1 m
Power equation
* = ](M,
= 0!25× 9!180× 16!1* = 39!5 kW
596
PROBLEM 7.38
Situation: A system with pump is described in the problem statement.
Find: Horsepower pump supplies.
APPROACH
Apply the ow rate equation, then the energy equation. Then apply the powerequation.
ANALYSIS
Flow rate equation
,12 = ]$I12 = 6$((0$4)× 12) = 7!64 ft/sec, 212$2) = 0!906 ft
,6 = 4,12 = 30!56 ft/sec
, 26 $2) = 14!50 ft
Energy equation
(%6$( + R6)" (%12$( + R12) = (13!55" 0!88)(46$12)$0!88(%12$( + R12) + ,
212$2) + M, = (%6$( + R6) + ,
26 $2)
M, = (13!55$0!88" 1)× 3!833 + 14!50" 0!906M, = 68!8 ft
Power equation
* (hp) = ](M,$550
* = 6× 0!88× 62!4× 68!8$550
* = 41!2 hp
597
PROBLEM 7.39
Situation: A system with a turbine is described in the problem statement.
Find: Power output from turbine.
APPROACH
Apply the energy equation from the upstream water surface to the downstream watersurface. Then apply the power equation.
ANALYSIS
Energy equation
%1(+, 212)+ R1 =
%2(+,22)+ R2 + ME + M-
0 + 0 + 35 = 0 + 0 + 0 + 1!5, 2
2)+ M-
, =]
I=
400
((0$4)× 72)= 10!39 ft/s
, 2
2)= 1!68 ft
M5 = 35" 2!52 = 32!48 ft
Power equation
* (hp) = ](M5 ×0!9
550
=(400)(62!4)(32!48× 0!9)
550
* = 1326 hp
598
PROBLEM 7.40
Situation: A system with a turbine is described in the problem statement.
Find: Power produced by turbine.
Assumptions:(a) All head loss is expansion loss.(b) 100% e"ciency.
APPROACH
Apply the energy equation from the upstream water surface to the downstream watersurface. Then apply the power equation.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 + M5 + ME
0 + 0 + 15 m = 0 + 0 + 0 + M5 + ,2$2)
M5 = 15 m" (52$2))= 13!73 m
Power equation
* = ](M5
= (1 m3/s)(9810 N/m3)(13!73 m)
* = 134!6 kW
599
PROBLEM 7.41
Situation: A system with a turbine is described in the problem statement.
Find:(a) Power generated by turbine.(b) Sketch the EGL and HGL.
APPROACH
Apply the energy equation from the upper water surface to the lower water surface.Then apply the power equation.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 +
XME + M5
0 + 0 + 100 ft = 0 + 0 + 4 ft + M5M5 = 96 ft
Power equation
* = (](M5)(e!.)
* (hp) = ](M5(e!.)$550 = 1' 000× 62!4× 96× 0!85$550
* = 9258 hp
Turbine
EGL
HGL
600
PROBLEM 7.42
Situation: A system with a pump is described in the problem statement.
Find: Power delivered by pump.
APPROACH
Apply the energy equation from the reservoir water surface to point B. Then applythe power equation.
ANALYSIS
Energy equation
%$( + , 2$2) + R + M, = %>$( + ,2>$2) + R>
0 + 0 + 40 + M, = 0 + 0 + 64; M, = 25 m
Flow rate equation
] = ,VIV = 25× 10"4 m2 × ,Vwhere ,V =
p2) × (65" 35) = 24!3 m/s
] = 25× 10"4 × 24!3 = 0!0607 m3/s
Power equation
* = ](M,
* = 0!0607× 9' 810× 25* = 14!89 kW
601
PROBLEM 7.43
Situation: A system with a pump is described in the problem statement.
Find: Power delivered by pump.
ANALYSIS
0 + 0 + 110 + M, = 0 + 0 + 200; M, = 90 ft
* (hp) = ](M,$550
] = ,VIV = 0!10 ,V
,V =p2) × (200" 110) = 76!13 ft/s
] = 7!613 ft3/s
Power equation
* = ](M,
* = 7!613× 62!4× 90$550
* = 77!7 hp
602
PROBLEM 7.44
Situation: A system with a pump is described in the problem statement.
Find: Power required for pump.
ANALYSIS
Energy equation
M, = R2 " R1 + ME
Expressing this equation in terms of pressure
(M, = (R2 " (R1 +!%2!&&
Thus pressure rise across the pump is
(M, = 53 lbf/ft3 × 200 ft +60× 144 lbf/ft2 = 19' 240 psf
Flow rate equation
] = , ×I
] = 3500 gpm× 0!002228ft3$sgpm
= 7!80 cfs
Power equation
. = ](M,
= 7!80× 19' 240$550. = 273 hp
603
PROBLEM 7.45
Situation: A system with a pump is described in the problem statement.
Find: Time required to transfer oil.
APPROACH
Apply the energy equation between the top of the uid in tank A to that in tank B.
ANALYSIS
Energy equation
M, + R= = R> + ME
or
M, + R= = R> + 20, 2
2)+, 2
2)
Solve for velocity
, 2 =2)
21(M, + R= " R>)
, 2 =2× 9!8121
(60 + R= " R>)
, = 0!966 6 (60 + R= " R>)1*2
The sum of the elevations of the liquid surfaces in the two tanks is
R= + R> = 21
So the energy equation becomes
, = 0!9666(81" 2R>)1*2
Continuity equation
AR>AP
= ,IpipeItank
= ,(0!2m)2
(12m)2
=¡2!778× 10"4
¢,
=¡2!778× 10"4
¢0!9666(81" 2R>)1*2
= 2!685× 10"4(81" 2R>)1*2
Separate variables
AR>(81" 2R>)1*2
= 2!685× 10"4AP
604
Integrate
20 ftZ
1
AR>(81" 2R>)1*2
=
!5Z
0
2!685× 10"4AP
¡"&81" 2R>
¢20 ft1 ft
=¡2!685× 10"4
¢!P
³"p81" 2 (20) +
p81" 2 (1)
´=
¡2!685× 10"4
¢!P
2! 485 1 =¡2!685× 10"4
¢!P
!P = 9256 s
!P = 9260 s = 2!57 hr
605
PROBLEM 7.46
Situation: A system with a pump is described in the problem statement.
Find:(a) Write a computer program to show how the pressure varies with time.(b) Time to pressurize tank to 300 kPa!
APPROACH
Apply the energy equation between the water surface at the intake and the watersurface inside the tank.
ANALYSIS
Energy equation
M, + R1 =%2(+ R2 + ME
Expressing the head loss in terms of the velocity allows one to solve for the velocityin the form
, 2 =2)
10(M, + R1 " R5 "
%5()
Substituting in values
, = 1!401(46" R5 " 10!193
4" R5)1*2
The equation for the water surface elevation in the tank is
!R5 = ,I,I5!P =
,
2500!P
A computer program can be written taking time intervals and nding the uid leveland pressure in the tank at each time step. The time to reach a pressure of 300 kPaabs in the tank is 698 seconds or 11.6 minutes. A plot of how the pressure varieswith time is provided.
606
Time (sec)
0 200 400 600 800
Pres
sure
(kPa
)
50
100
150
200
250
300
350
607
PROBLEM 7.47
Situation: A system with two tanks connected by a pipe is described in the problemstatement.
Find: Discharge between two tanks: ]
APPROACH
Apply the energy equation from water surface in A to water surface in B.
ANALYSIS
Energy equation
%=$( + ,2=$2) + R= = %>$( + ,
2>$2) + R> +
XME
%= = %> = %atm and ,= = ,> = 0
Let the pipe from A be called pipe 1. Let the pipe from B be called pipe 2Then X
ME = (,1 " ,2)2$2) + , 22 $2)
Continuity principle
,1I1 = ,2I2
,1 = ,2(I2$I1)
However I2 = 2I1 so ,1 = 2,2! Then the energy equation gives
R= " R> = (2,2 " ,2)2$2) + , 22 $2)= 2, 22 $2)
,2 =p)(R= " R>)
=p10) m/s
Flow rate equation
] = ,2I2
=³p
10) m/s´(20 cm2)(10"4 m2/cm2)
] = 0!0198 m3/s
608
PROBLEM 7.48
Situation: Flow through a pipe is described in the problem statement.
Find:a) Horizontal force required to hold transition in place.b) Head loss.
APPROACH
Apply the ow rate equation, the sudden expansion head loss equation, the energyequation, and the momentum principle.
ANALYSIS
Flow rate equation
,40 = ]$I40 = 1!0$((0$4)× 0!402) = 7!96 m/s, 240$2) = 3!23 m
,60 = ,40 × (4$6)2 = 3!54 m/s, 260$2) = 0!639 m
Sudden expansion head loss equation
ME = (,40 " ,60)2$2)= 0.996 m
Energy equation
%40$( + ,240$2) = %60$( + ,
260$2) + ME
%60 = 70' 000 + 9810(3!23" 0!639" 0!996) = 85' 647 Pa
Momentum principle
p A1 1p A22
Fx
XH$ = /!,$I! " /#,$I#
70' 000× 0$4× 0!42 " 85' 647× 0$4× (0!62) + H$ = 1000× 1!0× (3!54" 7!96)H$ = "8796 + 24' 216" 4' 420
= 11' 000 N
H$ = 11.0 kN
609
PROBLEM 7.49
Situation: Flow through a pipe is described in the problem statement.
Find: Head loss.
APPROACH
Apply the continuity principle, then the sudden expansion head loss equation.
ANALYSIS
Continuity principle
,8I8 = ,15I15
,15 =,8I8I15
= 4× (8$15)2 = 1!14 m/s
Sudden expansion head loss equation
ME =(,8 " ,15)2
(2))
ME =(4" 1!14)2
(2× 9!81)
ME = 0.417 m
610
PROBLEM 7.50
Situation: Flow through a pipe is described in the problem statement.
Find: Head loss
APPROACH
Apply the ow rate equation, then the sudden expansion head loss equation.
ANALYSIS
Flow rate equation
,6 = ]$I6 = 5$((0$4)× (1$2)2) = 25!46 ft/s;,12 = (1$4),6 = 6!37 ft/s
Sudden expansion head loss equation
ME = (,6 " ,12)2$(2))= (25!46" 6!37)2$(2× 32!2)
ME = 5.66 ft
611
PROBLEM 7.51
Situation: Flow through a pipe is described in the problem statement.
Find:(a) Horsepower lost.(b) Pressure at section 2.(c) Force needed to hold expansion.
APPROACH
Find the head loss by applying the sudden expansion head loss equation, rst solvingfor ,2 by applying the continuity principle. Then apply the power equation, theenergy equation, and nally the momentum principle.
ANALYSIS
Continuity equation
,2 = ,1(I1$I2)
= 25(1$4)
= 6!25 ft/s
Sudden expansion head loss equation
ME = (,1 " ,2)2$(2))ME = (25" 6!25)2$64!4
= 5!46 ft
a)Power equation
* (hp) = ](M$550
] = , I = 25(0$4)(52) = 490!9 ft3$s
* = (490!9)(62!4)(5!46)$550
* = 304 hp
b)Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 + ME
(5× 144)$62!4 + 252$64!4 = %2$( + 6!252$64!4 + 5!46
%2$( = 15!18 ft
%2 = 15!18× 62!4= 947 psfg
%2 = 6.58 psig
612
c)Momentum equation
XH$ = /!,$I! " /#,$I#
/ = 1!94× (0$4)× 52 × 25= 952!3 kg/s
%1I1 " %2I2 + H$ = /(,2 " ,1)(5)(14)0$4)(52)" (6!57)(144)(0$4)(102) + H$ = 952!3× (6!25" 25)
H$ = 42,426 lbf
613
PROBLEM 7.52
Situation: Flow through a pipe is described in the problem statement.
Find: Longitudinal force transmitted through pipe wall.
APPROACH
Apply the energy equation, then the momentum principle.
ANALYSIS
1
2
c.s.
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 + ME
but ,1 = ,2 and %2 = 0! Therefore
%1$( = "50 + 10%1 = "2496 lbf/ft2
Momentum principle
XH3 = /,3I! " /,3I# = #](,23 " ,13)
"%1I1 " (I2" 22+ Hwall = 0
Hwall = 1!52+ (I12" %1I1= 75 + (0$4)× 0!52(62!4× 50" 2' 496)= 75 + 122!5
Hwall = 197.5 lbf
614
PROBLEM 7.53
Situation: Flow through a pipe is described in the problem statement.
Find: (a) Pressure at outlet of bend.(b) Force on anchor block in the E-direction.
APPROACH
Apply the energy equation, then the momentum principle.
ANALYSIS
Energy equation
%50$( + ,250$2) + R50 = %80$( + ,
280$2) + R80 + ME
where %50 = 650' 000 Pa and R50 = R80Flow rate equation
,80 = ]$I80 = 5$((0$4)× 0!82) = 9!947 m/s, 280$2) = 5!04 m
Continuity equation
,50 = ,80 × (8$5)2 = 25!46 m/s, 250$2) = 33!04 m
ME = 10 m
Then
%80$( = 650' 000$( + 33!04" 5!04" 10%80 = 650' 000 + 9' 810(33!04" 5!04" 10) = 826' 600 Pa
%80 = 826.6 kPa
Momentum principle
XH$ = /,! " /,# = #](,80I$ " ,50I$)
%80I80 + %50I50 × cos 60! + H$ = 1' 000× 5("9!947" 0!5× 25!46)H$ = "415' 494" 63' 814" 113' 385
= "592' 693NH$ = -592.7 kN
615
PROBLEM 7.54
Situation: Flow through a pipe is described in the problem statement.
Find: Head loss at pipe outlet.
APPROACH
Apply the ow rate equation, then the sudden expansion head loss equation.
ANALYSIS
Flow rate equation
, = ]$I
= 10((0$4)× 12)= 12!73 ft/sec
Sudden expansion head loss equation
ME = , 2$2)
ME = 2.52 ft
616
PROBLEM 7.55
Situation: Flow through a pipe is described in the problem statement.
Find: Head loss at pipe outlet.
APPROACH
Apply the ow rate equation, then the sudden expansion head loss equation.
ANALYSIS
Flow rate equation
, = ]$I
= 0!50$((0$4)× 0!52)= 2!546 m/s
Sudden expansion head loss equation
ME = , 2$2)
= (2!546)2$(2× 9!81)
ME =0.330 m
617
PROBLEM 7.56
Situation: Flow through a pipe is described in the problem statement.
Find: Maximum allowable discharge before cavitation.
Properties: From Table A.5 %@ = 2340 Pa, abs.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2
0 + 0 + 5 = %2Ivapor$( + ,22 $2) + 0
%2Ivapor = 2340" 100' 000 = "97' 660 Pa gage
Then
, 22 $2) = 5 + 97' 660$9' 790 = 14!97 m
,2 = 17!1 m/s
Flow rate equation
] = ,2I2
= 17!1× 0$4× 0!152
] = 0.302 m3/s
618
PROBLEM 7.57
Situation: Flow through a pipe is described in the problem statement.
Find:a.) Head (4) at incipient cavitation.b) Discharge at incipient cavitation.
Properties: From Table A.5 %@ = 2340 Pa, abs.
APPROACH
First apply the energy equation from the Venturi section to the end of the pipe. Thenapply the energy equation from reservoir water surface to outlet:
ANALYSIS
(b) Energy equation from Venturi section to end of pipe:
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 + ME
%vapor$( + ,21 $2) = 0 + , 22 $2) + 0!9,
22 $2)
%vapor = 2' 340 Pa abs. = "97' 660 Pa gage
Continuity principle
,1I1 = ,2I2
,1 = ,2I2$I1
= 2!56,2
Then, 21 $2) = 6!55,
22 $2)
Substituting into energy equation
"97' 660$9' 790 + 6!55, 22 $2) = 1!9, 22 $2)
,2 = 6!49 m/s
Flow rate equation
] = ,2I2
= 6!49× 0$4× 0!42
] = 0.815 m3/s
Energy equation from reservoir water surface to outlet:
R1 = , 22 $2) + ME
4 = 1!9, 22 $2)
4 = 4.08 m
619
PROBLEM 7.58
Situation: A system with a machine is described in the problem statement.
Find: (a) Direction of ow.(b) What kind of machine is at point A.(c) Compare the diameter of pipe sections.(d) Sketch the EGL.(e) If there is a vacuum at anywhere, if so where it is.
ANALYSIS
(a) Flow is from right to left.(b) Machine is a pump.(c) Pipe CA is smaller because of steeper H.G.L.(d)
EGL
(e) No vacuum in the system.
620
PROBLEM 7.59
Situation: A system with a reservoir, pipe, and nozzle is described in the problemstatement.
Find:(a) Discharge (]) !(b) Draw the HGL and EGL.
APPROACH
Apply the energy equation from the reservoir surface to the exit plane of the jet.
Assumptions:
ANALYSIS
Energy equation. Let the velocity in the 6 inch pipe be ,6! Let the velocity in the12 inch pipe be ,12!
%1$( + ,21 $2) + R1 = %2$( + ,
26 $2) + R2 + ME
0 + 0 + 100 = 0 + , 26 $2) + 60 + 0!025(1000$1),212$2)
Continuity principle
,6I6 = ,12I12
,6 = ,12(I12$I6)
,6 = ,12122
62= 4,12
, 26 $2) = 16, 212$2)
Substituting into energy equation
40 = (, 212$2))(16 + 25)
, 212 = (40$41)2× 32!2,12 = 7!927 ft/s
Flow rate equation
] = ,12I12
= (7!927)(0$4)(12)
] = 6!23 ft3/s
621
EGL
HGL
622
PROBLEM 7.60
Situation: A hydroelectric power plant is described in example 7.5.
Find: Draw the HGL and EGL.
ANALYSIS
EGL
HGL
1.52 m
EGL
HGL
V /2g2
E1.=610m
623
PROBLEM 7.61
Situation: A ow system is described in problem 7.57.
Find: Draw the HGL and EGL.
ANALYSIS
EGL
HGL0.71m
10 m (approx.)
624
PROBLEM 7.62
Situation: A reservoir and pipe system is described in example 7.3.
Find: Draw the HGL and EGL.
ANALYSIS
37.2 m
42.6 m
2000 m
80 m
625
PROBLEM 7.63
Situation: A system with a black box is described in the problem statement.
Find: What the black box could be.
ANALYSIS
Because the E.G.L. slopes downward to the left, the ow is from right to left. Inthe ”black box” there could either be a turbine, an abrupt expansion or a partiallyclosed valve. Circle b, c, d.
626
PROBLEM 7.64
Situation: A system with an HGL is described in the problem statement.
Find: Whether this system is possible, and if so under what conditions.
ANALYSIS
This is possible if the uid is being accelerated to the left.
627
PROBLEM 7.65
Situation: A system with two tanks connected by a tapered pipe is described in theproblem statement.
Find: Draw the HGL and EGL.
ANALYSIS
EGL
HGL
628
PROBLEM 7.66
Situation: A system with an HGL and EGL is described in the problem statement.
Find: See problem statement.
ANALYSIS
(a) Solid line is EGL, dashed line is HGL.(b) No; AB is smallest.(c) From B to C.(d) pmax is at the bottom of the tank.(e) pmin is at the bend C.(f) A nozzle.(g) above atmospheric pressure.(h) abrupt expansion.
629
PROBLEM 7.67
Situation: A system with two tanks connected by a pipe is described in the problemstatement and gure 7.8.
Find: Discharge of water in system
APPROACH
Apply energy equation from upper to lower reservoir.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 +
XME
0 + 0 + 100 = 0 + 0 + 070 +X
MEX
ME = 30 m
ME = !02× (2$1)(, 2$2))30 = 0!02× (200$0!3)(, 2T $2)) + (0!02(100$0!15) + 1!0),
2A $2) (1)
Flow rate equation
,T = ]$IT = ]$((0$4)× 0!32) (2)
,A = ]$IA = ]$((0$4)× 0!152) (3)
Substituting Eq. (2) and Eq. (3) into (1) and solving for ] yields:
] = 0.110 m3/s
630
PROBLEM 7.68
Situation: A system with a pump is described in the problem statement.
Find:(a) Power supplied to the pump.(b) Sketch the HGL and EGL.
APPROACH
Apply the ow rate equation to nd the velocity. Then calculate head loss. Nextapply the energy equation from water surface to water surface to nd the head thepump provides. Finally, apply the power equation.
ANALYSIS
Flow rate equation
, = ]$I
= 3!0$((0$4)× (8$12)2)= 8!594 ft/sec
Head loss
ME =
µ0!018
2
1
, 2
2)
¶+
µ, 2
2)
¶
= 0!018
µ3000
8$12
¶8!5942
2 (32!2)+8!5942
2 (32!2)
= 94! 04 ft
Energy equation
%1(+ T1
, 212)+ R1 + M, =
%2(+ T2
, 222)+ R2 + ME
0 + 0 + 90 + M, = 0 + 0 + 140 + 94!04
M, = 144!0 ft
Power equation
* = ](M,
= 3!0× 62!4× 144
= 26957ft lbf
s
= 26957ft lbf
s
µft · lbf550 hp · s
¶
* = 49!0 hp
631
EGL
HGL
EGL
HGL
632
PROBLEM 7.69
Situation: A system with two tanks connected by a pipe is described in the problemstatement.
Find: (a) Discharge in pipe.(b) Pressure halfway between two reservoirs.
APPROACH
To nd the discharge, apply the energy equation from water surfaceI to water surfacein D! To nd the pressure at location P, apply the energy equation from water surfaceI to location * .
ANALYSIS
Energy equation
%=$( + ,2=$2) + R= = %>$( + ,
2>$2) + R> + ME
0 + 0 +4 = 0 + 0 + 0 + 0!01× (300$1), 2, $2) + ,2, $2)
16 = 4, 2, $2)
,, =&4× 2× 9!81 = 8!86 m/s
Flow rate equation
] = , I
= 8!86× (0$4)× 12
] = 6.96 m3/s
Energy equation between the water surface in I and point * :
0 + 0 +4 = %,$( + ,2, $2) " M+ 0!01× (150$1),
2, $2)
16 = %,$( " 2 + 2!5, 2, $2)
where , 2, $2) = 4 m. Then
%, = 9' 810(16 + 2" 10)
%, = 78.5 kPa
EGLHGL
p/(
V /2g=4 m2
633
PROBLEM 7.70
Situation: A system with two reservoirs connected by a pipe is described in theproblem statement.
Find: Elevation in left reservoir.
APPROACH
Apply the energy equation from the left reservoir to the right reservoir.
ANALYSIS
Energy equation
%E$( + ,2E$2) + RE = %F$( + ,
2F$2) + RF + ME
0 + 0 + RE = 0 + 0 + 110 + 0!02(200$1!128)(, 21 $2))
+0!02(300$1!596)(, 22 $2)) + (,1 " ,2)2$2) + , 22 $2)
Flow rate equation
,1 = ]$I1
= 16$1 = 16 ft/s
,2 = 8 ft/s
Substituting into the energy equation
RE = 110 + (0!02$2))((200$1!238)(162) + (300$1!596)(82)) + ((16" 8)2$64!4) + 82$64!4= 110 + 16!58 + 0!99 + 0!99
RE = 128.6 ft
EGLHGL
V /2g12
V /2g22
V1 V2
634
PROBLEM 7.71
Situation: A system with a pump is described in the problem statement.
Find: (a) Pump power.(b) Sketch the HGL and EGL.
APPROACH
Apply the energy equation from the upper reservoir surface to the lower reservoirsurface.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 + M, = %2$( + ,
22 $2) + R2 + ME
0 + 0 + 150 + M, = 0 + 0 + 250 +X
0!018(2$1)(, 2$2)) + , 2$2)
Flow rate equation
,1 = ]$I1 = 3$((0$4)× 12) = 3!82 m/s, 21 $2) = 0!744 m
,2 = ]$I2 = 4,1 = 15!28 m/s
, 22 $2) = 11!9 m
Substituting into the energy equation
M, = 250" 150 + 0!018[(100$1)× 0!744 + (1' 000$0!5)× 11!9] + 11!9= 541!6 m
Power equation
* = ](M,$e!.
= 3× 9' 810× 541!6$0!74
* = 21.54 MW
EGL
HGLh =535 mp
11.9 m
0.794 m
635
PROBLEM 7.72
Situation: A system showing the HGL and EGL is described in the problem statementand in Figure 7.9.
Find: (a) Water discharge in pipe(b) Pressure at highest point in pipe.
APPROACH
First apply energy equation from reservoir water surface to end of pipe to nd the ,to calculate the ow rate. Then to solve for the pressure midway along pipe, applythe energy equation to the midpoint:
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 + ME
0 + 0 + 200 = 0 + , 2$2) + 185 + 0!02(200$0!30), 2$2)
14!33, 2$2) = 15
, 2$2) = 1!047
, = 4!53 m/s
Flow rate equation
] = , I
= 4!53× (0$4)× 0!302
] = 0.320 m3/s
Energy equation to the midpoint:
%1$( + ,21 $2) + R1 = %"$( + ,
2"$2) + R" + ME
0 + 0 + 200 = %"$( + ,2"$2) + 200 + 0!02(100$0!30),
2$2)
%"$( = "(, 2$2)(1 + 6!667)= ("1!047)(7!667) = "8!027 m
%" = "8!027(= "78' 745 Pa
%" = -78.7 kPa
636
PROBLEM 7.73
Situation: A system with a pump is described in the problem statement.
Find: Time required to ll tank to depth of 10 m.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 + M, = %2$( + ,
22 $2) + R2 + ME
but %1 = %2 = 0' R1 = 0' ,1 = 0' ,2 ' 0! The energy equation reduces to
0 + 0 + 0 + M, = 0 + 0 + (2 m+ M) + ME
where M =depth of water in the tank
20" (4)(104)]2 = M+ 2 + , 2$2) + 10, 2$2)
where , 2$2) is the head loss due to the abrupt expansion. Then
18 = (4)(104)]2 + 11(, 2$2)) + M
, = ]$I
(11, 2)$2) = (11$2))(]2$I2) = (1!45)(105)]2
18 = 1!85× 105]2 + M]2 = (18" M)$((1!85)(105))] = (18" M)045$430
But ] = I-AM$AP where I- = tank area, so
! AM$AP = (18" M)045$((430)(0$4)(5)2) = (18" M)045$8' 443AM$(18" M)045 = AP$8' 443
Integrate:"2(18" M)045 = (P$8' 443) + const.
But P = 0 when M = 0 so const. = "2(18)045! Then
P = (18045 " (18" M)045)(16' 886)
For M = 10 m
P = (18045 " 8045)(16' 886)= 23' 880 s
P = 6.63 hrs
637
PROBLEM 7.74
Situation: A system showing the HGL and EGL is described in the problem state-ment.
Find:(a) Direction of ow.(b) Whether there is a reservoir.(c) Whether the diameter at E is uniform or variable.(d) Whether there is a pump.(e) Sketch a physical set up that could exist between - and 1.(f) Whether there is anything else revealed by the sketch.
ANALYSIS
(a) Flow is from I to N because EGL slopes downward in that direction.(b) Yes, at 1, because EGL and HGL are coincident there.(c) Uniform diameter because , 2$2) is constant (EGL and HGL uniformly spaced).(d) No, because EGL is always dropping (no energy added).(e)
(f) Nothing else.
638
PROBLEM 7.75
Situation: A system with a reservoir and a pipe is described in the problem statement.
Find:(a) Discharge(b) Draw HGL and EGL(c) location of maximum pressure(d) location of minimum pressure(e) values for maximum and minimum pressure
APPROACH
Apply the energy equation from reservoir water surface to jet.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 + ME
0 + 0 + 100 = 0 + , 22 $2) + 30 + 0!014(2$1)(,2, $2))
100 = 0 + , 22 $2) + 30 + 0!014(500$0!60),2, $2)
Continuity equation
,2I2 = ,,I,
,2 = ,,I,$IE
,2 = 4,,
Then
, 2, $2)(16 + 11!67) = 70
,, = 7!045 m/s
, 2, $2) = 2!53 m
Flow rate equation
] = ,,I,
= 7!045× (0$4)× 0!602
] = 1.992 m3/s
639
pmin
EGLHGL
pmax
40.5 m
%min : 100 = %min$( + ,2, $2) + 100 + 0!014(100$0!60),
2, $2)
100 = %min$( + 100 + 3!33× 2!53
%min = -82.6 kPa, gage
%max$( = 40!5" 2!53 m
%max = 372.5 kPa
640
PROBLEM 7.76
Situation: A wind mill is described in problem 6.66.
Find: Power developed by windmill.
Assumptions: Negligible head loss.
APPROACH
Apply energy equation from upstream end to downstream end and the continuityprinciple to nd the head delivered to the turbine. Then apply the power equation.
ANALYSIS
Energy equation
%1$( + ,21 $2) = %2$( + ,
22 $2) + M5
M5 = , 21 $2) " ,22 $2)
Continuity principle
,2 = ,1I1$I2 = ,1(3$4!5)2 = 0!444,1
, 22 $2) = 0!197, 21 $2)
Then substituting into the energy equation
M5 = 102$(2× 9!81)[1" 0!197]= 4!09 m
Power equation
* = ](M5
= 10(0$4)× 32 × 1!2× 9!81× 4!09
* = 3.40 kW
641
PROBLEM 7.77
Situation: A design of a subsonic wind tunnel is described in the problem statement.
Find: Power required.
APPROACH
To nd the head provided by the pump, apply the energy equation from upstreamend to downstream end . Then apply the power equation.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 + M, = %2$( + ,
22 $2) + R2 + ME
0 + 0 + 0 + M, = 0 + , 22 $2) + 0 + 0!025,2- $2)
Continuity principle
,-I- = ,2I2
,2 = ,-I-$I2
= ,- × 0!4, 22 $2) = 0!16, 2- $2)
Substituting into the energy equation
M, =, 2-2)(0!185)
=602
2× 9!81(0!185)
M, = 33!95 m
Power equation
* = ](M,
= (, I) (#))M,
= (60× 4) (1!2× 9!81) (33!95)
* = 95.9 kW
642
PROBLEM 7.78
Situation: Flow through a pipe accelerated around a disk—additional details are pro-vided in the problem statement.
Find:(a) Develop an expression for the force required to hold the disk in place in terms ofU, D, d, and #!(b) Force required under given conditions.
APPROACH
Apply the energy equation from section (1) to section (2), and apply the momentumprinciple.
ANALYSIS
Control volume
U2
F disk on fluid
U1
Energy equation
%1 + #\21$2 = %2 + #\
22$2
%1 " %2 = #\22$2" #\21$2
but
\1I1 = \2(0$4)(12 " A2)
\2 = \112$(12 " A2) (1)
Then%1 " %2 = (#$2)\21 [(1
4$(12 " A2)2 " 1] (2)
Momentum principle for the C.V.
XH$ = /!\! " /#\# = #](\2$ " \1$)
%1I" %2I+ Hdisk on uid = #](\2 " \1)Huid on disk = HA = #](\1 " \2) + (%1 " %2)I
643
Eliminate %1 " %2 by Eq. (2), and \2 by Eq. (1):
HA = #\I(\1 " \112$(12 " A2)) + (#\2$2)[(14$(12 " A2)2 " 1]I
HA = #\2012$8[1$(12$A2 " 1)2]
When \ = 10 m/s, 1 = 5 cm, A = 4 cm and # = 1!2 kg/m3
HA = (1!2× 1020 × (0!05)2$8)[1$((0!05$0!04)2 " 1)2]HA = 0.372 N
644
PROBLEM 8.1
Situation: Consider equations: (a) ] = (2$3)-2&2)43*2, (b) , = (1!49$Q)"2*361*2,
(c) M( = b(2$1), 2$2), (d) 1 = 0!074""042G DE#, 2$2!
Find: Determine which equations are homogeneous.
a
] = (2$3)-2p2)43*2
[]] = 23$& = 2(2$& 2)1*223*2
23$& = 23$& homogeneous
b
, = (1!49$Q)"2*361*2
[, ] = 2$& = 2"1*622*3 not homogeneous
c
M( = b(2$1), 2$2)
[M( ] = 2 = (2$2)(2$& )2$(2$& 2) homogeneous
d
1 = 0!074""042G DE#, 2$2
[1] = +2$& 2 = 2× 2× (+$23)(2$& )2 homogeneous
645
PROBLEM 8.2
Situation: Consider variables: (a) & (torque), (b) #, 2$2 (c)pB$# (d) ]$813
Find: Determine the dimensions of the variables.
a [& ] =+2$& 2 × 2 = +22$& 2
b [#, 2$2] = (+$23)(2$& )2 = +$2& 2
c [pB$#] =
p(+2$& 2)$22)$(+$23) = 2$&
d []$813] = (23$& )$(&"123) = 1$ Dimensionless
646
PROBLEM 8.3
Situation: Liquid is draining out of a tank–details are provided in the problemstatement.
Find: The 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
!M 2 !7A
0 !7A
0 !7A
0P & P & P &# Y
E3#A3 +
1 2 9A
0 9A
0 9A
0A 2
( YE2- 2
(A2 Y- 2
RLA
1- 2
R52
LA0
M1 2 71A
0 71A
0 71A
0
In the rst step, length is taken out with A! In the second step, mass is taken outwith #A3! In the third step, time is taken out with P! The functional relationship is
!7A= b(9
A,R5
2
LA,71A)
This can also be written as
!M
A= b(
A
1')P2
A'M1A)
647
PROBLEM 8.4
Situation: Small amplitude waves move on a liquid surface–details are provided inthe problem statement.
Find: Dimensionless functional form for wave celerity.
APPROACH
Use the exponent method.
ANALYSIS
, = b(M' O' (' ))
where [, ] = 2$&' [M] = 2' [O] =+$& 2' [(] =+$(22& 2)' [)] = 2$& 2
[, ] = [M'O0(1)A]
2$& = (2')(+ 0$& 20)(+ 1$(221& 21)(2A$& 2A)
2 : 1 = C" 2Z+ A+ : 0 = >+ Z
& : 1 = 2>+ 2Z+ 2A
Determine the exponents b, c & d in terms of a
0" 2Z+ A = 1" C>+ Z+ 0 = 0
2>+ 2Z+ 2A = 1
Solution yields: > = "Z' A = 1$2
"2Z+ 1$2 = 1" C =! "2Z = 1$2" C =! Z = "1$4 + C$2> = 1$4" C$2
Thus
, = M'O(1*4"'*2)(("1*4+'*2))1*2
=¡)1*2O1*4$(1*4
¢(M(1*2$O1*2)'
Which can also be written as
, 4($()2O) = b(M2($O)
Alternate forms:
(, 4($()2O))(O$M2() = b(M2($O)
, 2$()M)2 = b(M2($O)
or,$p)M = b(M2($O)
648
PROBLEM 8.5
Situation: Capillary rise in a tube is described in the problem statement.
Find: The 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
M 2 7A
0 7A
0A 2O Y
- 2O Y
- 2CRA2
0
( YE2-2
(A2 Y- 2
In the rst step, A was used to remove length and in the second (A2 was used toremove both length and time. The nal functional form is
7A= b( C
RA2)
649
PROBLEM 8.6
Situation: Drag force on a small sphere is described in the problem statement.
Find: The relevant 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
H9YE-2
Z,A
Y- 2
Z,/A2
1-
Z,/? A
0
, E-
?A
1-
?A
1-
7 YE-
7A Y-
A 2
In the rst step, length is removed with A! In the second, mass is removed with 7Aand in the third time is removed with ,$A! Finally
Z,/? A
= -
650
PROBLEM 8.7
Situation: Drag on a rough sphere is described in the problem statement.
Find: The 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
H9YE- 2
Z,9
Y- 2
Z,L94
1- 2
Z,L? 292 0
1 2# Y
E3#13 +
7 YE-
71 Y-
/L92
1-
/L? 9
0
, E9
?9
1-
?9
1-
c 2 [9
0 [9
0 [9
0
In the rst step, length is removed with 1! In the second step, mass is removed with#13 and in the nal step time removed with ,$1! The nal functional form is
Z,L? 292 = b(
L? 9/' [9)
Other forms are possible.
651
PROBLEM 8.8
Situation: A spinning ball is described in the problem statement.
Find: The 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
H YE- 2
Z9
Y-2
ZL94
1-2
ZL? 292 0
1 2, E
-?9
1-
?9
1-
# YE3
#13 +7 Y
E-71 Y
-/L92
1-
/L? 9
0
c& 2 [-9
0 [-9
0 [-9
0J 1
-J 1
-J 1
-Q9?
0
Length is removed in the rst step with 1' mass in the second step with #13 andtime in the third step with ,$1! The functional form is
ZL? 292 = b(
L? 9/' [-9' Q9?)
There are other possible forms.
652
PROBLEM 8.9
Situation: Drag on a square plate is described in the problem statement.
Find: The 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
H9YE- 2
Z,>
Y- 2
Z,L>4
1-2
Z,L? 2>2
0
, E-
?>
1-
?>
1-
# YE3
#D3 +D 27 Y
E-7D Y
-/L>2
1-
/L? >
0
@0 E-
T0
>1-
T0
>1-
T0
?0
2$ 2 E'>
0 E'>
0 E'>
0
Length is removed in rst step with D' mass is removed in second with #D3 and timeis removed in the third with ,$D! The function form is
Z,L? 2>2
= b( /L? >
' T0
?' E'>)
Other forms are possible.
653
PROBLEM 8.10
Situation: Flow through a small horizontal tube is described in the problem state-ment.
Find: The 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
!,!<
YE2- 2
!,!<12 Y
- 2!,!<
9/
1-
!,!<
92
/?0
7 YE-
71 Y-
, E-
?9
1-
?9
1-
1 2
Length is removed in the rst step with 1' mass is removed in the second with 71and time is removed in the third with ,$1! Finally we have
!,!<
92
/?= -
or
!%
!L= -
7,
12
654
PROBLEM 8.11
Situation: A centrifugal pump is described in the problem statement.
Find: The 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
!% YE- 2
!%1 Y- 2
!,L92
1- 2
!,:L92 0
1 2Q 1
-Q 1
-Q 1
-
] E3
-X93
1-
X93
1-
X:93
0# Y
E3#13 +
In the rst step, length is removed with 1! In the second step, mass is removed with#13 and time is removed in the third step with Q! The functional form is
!,:L92 = b(
X:93)
655
PROBLEM 8.12
Situation: A bubble is oscillating in an inviscid uid–additional details are providedin the problem statement.
Find: The 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
b 1-
b 1-
b 1-
bq
LF2
,0
% YE- 2
,L
E2
- 2,LF2
1- 2
" 2 " 2# Y
E3
c 0 c 0 c 0 c 0
In the rst step, mass is removed with #! In the second step, length is removed with" and, nally, in third step time is removed with %$#"2! The nal functional form is
b"q
L,= b(c)
656
PROBLEM 8.13
Situation: The problem statement describes force on a satellite in the earth’s upperatmosphere.
Find: The nondimensional form of equation.
APPROACH
Use the exponent method.
ANALYSIS
H = e'#011ZA
+2$& 2 = 2'(+$23)021(2$& )A
= 2'"30+1+A+ 0&"A
Equating powers of +' 2 and & , we have
& : A = 2
+ : > = 1
2 : 1 = C" 3 + Z+ Z1 = C" 3 + Z+ 2
C+ Z = 2
C = 2" Z
Therefore,
H = e(2"1)#11Z2
H$(#Z2e2) = b(1$e)
Another valid answer would be
H$(#Z212) = b(1$e)
657
PROBLEM 8.14
Situation: The problem statement describes the velocity of ripples moving on thesurface of a small pond.
Find: An expression for ,!
APPROACH
Use the step-by-step method.
ANALYSIS
, E-
, E-
?<
1-
? <1.2L1.2
C1.20
L 2 L 2
# YE3
LC
-2
E3LCL3 & 2
O Y-2
In the rst step, mass is removed with O. In the second step, length is removed withL and in the third step, time is removed with #L3$O! The functional form is
,q
<LC= -
or
, = -
rO
#L
658
PROBLEM 8.15
Situation: A circular plate rotates with a speed J–additional details are provided inthe problem statement.
Find: The 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
& YE2
- 2-92
Y- 2
-/93
1-
-/93Q
0
7 YE-
71 Y-
J 1-
J 1-
J 1-
6 2 .9
0 .9
0 .9
01 2
In the rst step, length is removed with 1. In the second step, mass is removed with71 and in the last step, time is removed with J! The nal functional form is
-/93Q
= b( .9)
659
PROBLEM 8.16
Situation: A study involves capillary rise of a liquid in a tube–additional details areprovided in the problem statement.
Find: The 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
M 2 7A
0 7A
0 7A
0P & P & P &
O Y-2
O Y-2
CLA3
1- 2
C52
LA30
# YE3
#A3 +
( YE2- 2
(A2 Y-2
RLA
1- 2
R52
LA0
7 YE-
7A Y-
/LA2
1-
/5LA2
0
A 2
In the rst step, length is removed with A! In the second step, mass is removed with#A3 and in the nal step, time is removed with P! The nal functional form is
7A= b(C5
2
LA3,R5
2
LA, /5LA2)
660
PROBLEM 8.17
Situation: An engineer characterizing power * consumed by a fan.Power depends on four variables: * = b (#'1']' Q)
# is the density of air1 is the diameter of the fan impeller] is the ow rate produced by the fanQ is the rotation rate of the fan.
Find:(a) Find the relevant 0-groups.(b) Suggest a way to plot the data.
APPROACH
Apply the 0-Buckingham theorem to establish the number of 0-groups that need tobe found. Apply the step-by-step method to nd these groups and then use the0-groups to decide how a plot should be made.
ANALYSIS
0-Buckingham theorem. The number of variables is Q = 5. The number of primarydimensions is / = 3!
Number of 0-group = Q"/= 5" 3= 2
Step by step method. The variable of interest are * = b (#'1']' Q) ! The step-by-step process is given in the table below. In the rst step, the length dimension iseliminated with 1. In the second step, the mass dimension is eliminated with #13.In the third step, the time dimension is eliminated with 1$Q!
661
* YE2
-3\92
Y- 3
\L95
1- 3
\L95:3
0
# YE3
#13 +1 2
] E3
-X93
1-
X93
1-
X:93
0Q 1
-Q 1
-Q 1
-
The functional form of the equation using 0-groups to characterize the variables is:
\L95:3
= b¡X:93
¢
Answer part b ==F Plot dimensionless pressure (*$#15Q3)on the vertical axis,dimensionless ow rate (]$Q13)on the horizontal axis.
662
PROBLEM 8.18
Situation: A gas-particle mixture that is owing in a tube is causing erosion of thewall–additional details are provided in the problem statement.
Find: Determine a set of 0-groups. Express the answer as
=,
N= b (01' 02' 03' 04)
APPROACH
Use the exponent method.
ANALYSIS
= = b(D3' O'N' ,' A' +,'1)
where
[=] = +$(22& ) ; [D3] = dimensionless
[N] = +$(2& 2) ; [O] =+$(2& 2)
[, ] = 2$& ; [A] = 2 ; [ +,] =+$& ; [1] = 2
! [=] = [NHO], RA^ +_,1
`]
+(22& ) = (+$(2& 2))H(+$(2& 2))](2$& )R2^(+$& )_2`
+ : 1 = T+ ` + h
2 : 2 = T+ ` " ( " i " e& : 1 = 2T+ 2` + ( + h
Use T' ( and h as unknowns
T+ 0 + h = 1" ` (5)
T" ( + 0 = 2" ` + i + e (6)
2T+ ( + h = 1" 2` (7)
(1) : T+ h = 1" `(2) + (3) : 3T+ h = 3" 3` + i + e
(2) + (3)" (1) : 2T = 2" 2` + i + e
663
T = 1" ` + (i + e)$2h = "T+ 1" ` = "1 + ` " ((i + e)$2) + 1" ` = "(i + e)$2= T" 2 + ` " i " e= 1" ` + ((i + e)$2)" 2 + ` " (i + e) = "1" ((i + e)$2)
= = b(N(1"]+((^+`)*2)T], "1"((^+`)*2A^ +"((^+`)*2), 1`' Br
or
=,$N = b(O$N'NA2$(, +,)' N12$( +,, )' D3)
Alternate form:=,$N = b(O$N'NA2$, +,' A$1'D3)
664
PROBLEM 8.19
Situation: The problem statement describes the ow of water or oil through an abruptcontraction.
Find: The 0-groups that characterize pressure drop. Express the answer as
!%A4
#]2= b(01' 02)
APPROACH
Use the step-by-step method.
ANALYSIS
!% YE- 2
!%A Y- 2
!,LA2
1-2
!,A4
LX20
] E3
-XA3
1-
XA3
1-
# YE3
#A3 +
7 YE-
7A Y-
/LA2
1-
/ALX
0
1 2 9A
0 9A
0 9A
0A 2
Length is removed with A in the rst step, mass with #A3 in the second step and timewith ]$A3 in the third step. The nal form is
!,A4
LX2= b( /A
LX,9A)
665
PROBLEM 8.20
Situation: Flow through a transition section (large diameter to small diameter) in apipe where the Reynolds number is very large.
Find: Compare viscous forces to inertial forces.
ANALYSIS
Reynolds number %inertial forcesviscous forces
Thus, if Reynolds number is large, the viscous forces are small compared to the inertialforces.
Answer ==FViscous forces are relatively small as compared to the inertial forces.
666
1.
PROBLEM 8.21
Situation: A solid particle falls through a viscous uid–additional details are pro-vided in the problem statement.
Find: Find the 0"groups–express the answer in the form:
,&)1
= b (01' 02)
APPROACH
Use the exponent method.
ANALYSIS
, ' = #0(#1,7A1G)(
Writing out the dimensions
µ2
&
¶'=
µ+
23
¶0µ+
23
¶1µ+
2&
¶A(2)G
µ2
& 2
¶(
Setting up the equations for dimensional homogeneity
2 : C = "3>" 3Z" A+ =+ b+ : 0 = >+ Z+ A& : C = A+ 2b
Substituting the equation for & into the one for 2 gives
0 = "3>" 3Z" 2A+ =" b0 = >+ Z+ A
Solving for = from the rst equation and Z from the second equation
= = 3>+ 3Z+ 2A+ bZ = "A" >
and the equation for = becomes
= = "A+ b
Substituting into the original equation
, A+2( = #0(#"A"0, 7A1"A+()(
Collecting terms
667
µ, #,1
7
¶A=
µ1)
, 2
¶( µ#(#,
¶0
The functional equation can be written as
?%D9= b
³? L/9
/'L0L/
´
668
PROBLEM 8.22
Situation: A bubble is rising in a liquid–additional details are provided in the prob-lem statement.
Find: The 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
The functional relationship is
, = b(#2' 72'1' O' ))
Using the step-by-step method
, E-
?9
1-
?9
1-
?%D9
0
#2YE3
#213 +
72YE-
721Y-
/%L%9
21-
/%L%9
3.2D1.20
1 2O Y
-2O Y
- 2C
L%93
1- 2
CL%9
2D0
) E-2
D9
1- 2
D9
1- 2
In the rst step, 1 was used to remove the length dimension. In the second step,#21
3 was used to remove the mass dimension and nally, in the third step,p)$1
was used to remove the time dimension. The nal functional form can be expressedas
?%D9= b
³/2%
L2%93D' CL%9
2D
´
669
PROBLEM 8.23
Situation: The problem statement describes a ow meter.
Find: The 0"groups.
APPROACH
Use the exponent method.
ANALYSIS
The functional relationship is
/ = b(1'7'!%' #)
Using the exponent method, we have
/' = 1071!%A#G
Writing out the dimensional equation
+
&
'
= 20µ+
2&
¶1µ+
2& 2
¶Aµ+
23
¶G
and the equations for the dimensions are
2 : 0 = >" Z" A" 3=+ : C = Z+ A+ =& : C = Z+ 2A
Substituting the equation for time into the equation for mass yields two equations
0 = >" Z" A" 3=0 = "A+ = or A = =
and the rst equation becomes
0 = >" Z" 4A or > = Z+ 4A
Substituting back into the original equation
/1+2A = 11+4A71!%A#A
Collecting like powers gives
µ/2
14#!%
¶A=
µ71
/
¶1
A functional relationship is
/&#!%12
= b(71
/)
670
The functions can be combined to form
"%L!,92 = b(
/%L!,9
)
671
PROBLEM 8.24
Situation: The problem statement describes a torpedo-like device.
Find:Identify which 0"groups are signicant.Justify the answer.
ANALYSIS
• Viscous stresses inuence drag. Thus, Reynolds number is signicant.
• Because the body in near the surface, the motion will produce waves. Thesewaves will inuence drag. Thus, the Froude number is important.
• A major design consideration is the drag force on the object. The appropriate0"group is the coe"cient of drag (-9)which is dened by
-9 =Hdrag
#, 2$2IK
Answer ==F Signicant 0"groups are Reynolds number, Froude number and thecoe"cient of drag.
672
PROBLEM 8.25
Situation: Liquid is moving through a bed of sand–additional details are providedin the problem statement.
Find: The 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
The functional relationship is
!% = b(1'2' T' 7' #)
Using the step-by-method
!% YE- 2
!%!9 Y- 2
!,L!&2
1- 2
!,L!&2
/20
1 2 9!&
0 9!&
0 9!&
0!9 2T 0 T 0 T 0 T 07 Y
E-7!9 Y
-/
L!&21-
# YE3
#!93 +
In the rst step, the length was removed with !9! In the second step, the mass wasremoved with #!93! In the third step, time was removed with 7$#!92! Finally thefunctional form is
%L!,!&/
= b( 9!&' T)
673
PROBLEM 8.26
Situation: An oscillating n is being tested in a wind tunnel–additional details areprovided in the problem statement.
Find: The 0"groups.
APPROACH
Use the exponent method.
ANALYSIS
The functional relationship is
H9 = b(#' ,' 6' J)
Writing out the dimensional parameters using the exponent method
H '9 = #0, 16AJG
Including the dimensions
µ+2
& 2
¶'=
µ+
23
¶0µ2
&
¶122A
µ1
&
¶G
Writing the equations for dimensional homogeneity,
+ : C = >2 : C = "3>+ Z+ 2A& : 2C = Z+ =
Solving for C' > and Z in terms of A' and = gives
C = A" =$2> = A" =$2Z = 2A" 2=
Substituting into the original equation
HA"G*29 = #A"G*2, 2A"2G6AJG
µH9#, 26
¶A=
ÃH1*29 J
#1*2, 2
!G
so
H9#, 26
= b(H1*29 J
#1*2, 2)
674
It is standard practice to eliminate H9 from the right side of the equation. To dothis, we may use the concept that 0-groups may be combined by multiplication ordivision. The result is
Z,L? 2.
= b³Q2.? 2
´
675
PROBLEM 8.27
Situation: The problem statement describes a centrifugal pump.
Find: The 0-groups.
APPROACH
Use the step-by-step method.
ANALYSIS
] = b(8'1' M,' 7' #' ))
] E3
-X93
1-
X93
1-
Xa93 0
8 1-
8 1-
1-
1-
1 2
M, 2 7/9
0 7/9
0 7/9
07 Y
E-71 Y
-/L92
1-
/La92 0
# YE3
#13 +) E
- 2D9
1- 2
D9
1- 2
Da29
0
The functional relationship is
Xa93 = b(
7/9, /La92 ,
Da29
)
Some dimensionless variables can be combined to yield a di!erent form
]
813= b(
M,)
8212'
7
#812')
821)
676
PROBLEM 8.28
Situation: Drag force on a submarine is studied using a 1$15 scale model–additionaldetails are provided in the problem statement.
Find: (a) Speed of water in the tunnel for dynamic similitude.(b) The ratio of drag forces (ratio of drag force on the model to that on the prototype).
APPROACH
Dynamic similarity is achieved when the Reynolds numbers are the same.
ANALYSIS
Match Reynolds number
Re" = Re,
," =2,2"
:":,,,
," = 15×1× 10"6
1!4× 10"6× 2 = 21.4 m/s
The ratio of the drag force on the model to that on the prototype is
H9I"H9I,
=#"#,
µ,",,
¶2µ_"_,
¶2
=998
1015
µ21!4
2
¶2µ1
15
¶2
= 0.500
677
PROBLEM 8.29
Situation: The problem statement describes ow (oil and water) in a pipe.
Find: Velocity of water for dynamic similarity.
APPROACH
Dynamic similarity is achieved when the Reynolds numbers are the same.
ANALYSIS
Match Reynolds number
Re% = Re0,%A
:%=
,0A
:0
,% =,0:%:0
= 0!5 m/s (10"6
10"5)
= 0.05 m/s
678
PROBLEM 8.30
Situation: The problem statement describes ow (oil and water) in a pipe.
Find: Velocity of water for dynamic similarity.
APPROACH
Dynamic similarity is achieved when the Reynolds numbers are the same.
ANALYSIS
Match Reynolds number
Re5 = Re15,515:5
=,15115:15
,5 = ,15(11515)(:5:15)
= (2 m/s)(15
5)
µ10"6
4× 10"6
¶
,5 = 1!5 m$ s
679
PROBLEM 8.31
Situation: The problem statement describes a venturi meter.
Find:a.) The discharge ratio (]"$],)b.) Pressure di!erence (!%,) expected for the prototype.
ANALYSIS
Match Reynolds number
Re" = Re,
,"2"$:" = ,,2,$:,
,"$,, = (2,$2")(:"$:,) (1)
Multiply both sides of Eq. (1) by I"$I, = 22"$22,:
(,"I")$(,,I,) = (2,$2")× (1)× 22"$22,
]"$], = 2"$2,
]"$], = 1/10
-,1 = -,/(!%$#, 2)" = (!%$#, 2),
!%, = !%"(#,$#")(,,$,")2
= !%"(1)(2"$2,)2
= 300× (1$10)2 = 3.0 kPa
680
PROBLEM 8.32
Situation: The problem statement describes vortex shedding from a cylinder.
Find: The 0"groups.
APPROACH
Use the step-by-step method.
ANALYSIS
Q 1-
Q 1-
Q 1-
:A?
0, E
-, E
-?A
1-
A 2 A 2
# YE3
L/
-E2
LA2
/& ? AL
/0
7 YE-
Mass is removed with 7 in the rst step, length with A in the second step and timewith ,$A in the last step. The nal functional form is
:A?= b(? AL
/)
681
PROBLEM 8.33
Situation: Drag is to be measured with a scale model (1$5) of a bathysphere.
Find: The ratio of towing speeds (ratio of speed of the model to the speed of theprototype).
APPROACH
Dynamic similarity based on matching Reynolds number of the model and prototype.
ANALYSIS
Reynolds number
Re" = Re,,"2":"
=,,2,:,
Assume :" = :,
,"2" = ,,2,,",,=2,2"
= 5,,
,"$,, = 5
682
PROBLEM 8.34
Situation: A spherical balloon is tested by towing a 1/3 scale model in a lake–additional details are provided in the problem statement.
1" = 1 ft; 1, = 3 ft; :, = 1!58× 10"4 ft2$sec;:" = 1!22× 10"5 ft2$sec; ," = 5 ft/sec; H" = 15 lbf
Find: Drag force on the prototype (operates in air).
APPROACH
Dynamic similarity based on Reynolds number and on pressure coe"cient.
ANALYSIS
Match Reynolds numbers
Re" = Re,
,"1"$:" = ,,1,$:,
or,,," = (1"$1,)(:,$:") = (1$3)(1!58× 10"4$1!22× 10"5) (1)
Match pressure coe"cients
-,1 = -,/!%"$(#",
2"$2) = !%,$(#,,
2, $2)
!%,$!%" = (#,$#")(,2, $,
2")
H,$H" = (!%,I,)$(!%"I") = (I,$I")(#,$#")(,2, $,
2") (2)
Combine Eq. (1) and (2)
H,$H" = (#,$#")(:,$;")2 = (0!00237$1!94)(1!58× 10"4$1!22× 10"5)2
= 0!2049
H, = 15× 0!2049
= 3!07 lbf = 13!7N
683
PROBLEM 8.35
Situation: An engineer needs a value of lift force(HE) for an airplane.Coe"cient of lift: -E = 0!4.Denition of coe"cient of lift.
-E = 2HE#, 26
Density of ambient air: # = 1!1 kg$m3!Speed of the air relative to the airplane: , = 80m$ s!Planform area (i.e. area from a top view): I = 15m2.
Find: The lift force in units of Newtons.
APPROACH
Use the specied value of -E = 0!4 along with the denition of this 0-group.
ANALYSIS
From the denition of -E:
HE = -E
µ#, 2
2
¶6
= (0!4)(1!1 kg$m3) (80m$ s)2
2
¡15m2
¢
= 21' 100N
HE = 21!1 kN
COMMENTS
This lift force is about 4750 lbf.
684
PROBLEM 8.36
Situation: A 1/5 scale model of a plane is tested in a wind tunnel–additional detailsare provided in the problem statement.
Find: Density of the air in tunnel.
APPROACH
Dynamic similarity based on matching Reynolds number and Mach number.
ANALYSIS
Match Reynolds number
Re" = Re,
(, 1$:)" = (, 1$:),
(,"$,,) = (1,$1")(:"$:,)
:"$:, = (,"1"$,,1,)
(7"#,$7,#") = (,"1"$,,1,)
#" = #,(7"$7,)(,,$,")(1,$1") (1)
Match Mach number
+" = +,
(,$Z)" = (,$Z),
(,"$,,) = Z"$Z,
= ((&c"& )"$(
&c"& ),)
=q&"$&, = (298$283)
1*2 (2)
Combining Eqs. (1) and (2):
#" = 1!26(1!83× 10"5$1!76× 10"5)(283$298)1*2(5)
= 6.38 kg/m3
685
PROBLEM 8.37
Situation: Flow in a pipe is being tested with air and water.
Find: Velocity ratio: ,air$,water
ANALYSIS
Match Reynolds number
Re= = ReM
,=2=$:= = ,M2M$:M ; but 2=$2M = 1
! ,=,M = :=$:M % (1!6)(10"4)$(1!2)(10"5)(at 60!H ),=$,M F 1
The correct choice is c)
686
PROBLEM 8.38
Situation: Pipe ow is being studied–additional details are provided in the problemstatement.
Find: Mean velocity of water in model to insure dynamic similarity.
ANALYSIS
Match Reynolds number
Re" = Re,
,"A"#"$7" = ,,A,#,$7,," = ,,(A,$A")(#,$#")(7"$7,)
," = (3 ft/s)(48$4)(1!75$1!94)((2!36× 10"5)$(4× 10"4))
," = 1!92 ft/s
687
PROBLEM 8.39
Situation: A student team is designing a radio-controlled blimp.
Drag force is characterized with a coe"cient of drag:!
-9 = 2H9
#, 2I,= 0!3
Blimp speed is , = 750mm$ s. Maximum diameter of the blimp is 1 = 0!475m.Projected area is I, = 012$4!
Find:a.) Reynolds number.b.) Force of drag in newtons.c.) Power in watts.
Properties: Air at & = 20 !C: # = 1!2 kg$m3' 7 = 18!1× 10"6N · s$m2.
Assumptions: Assume the blimp cross section is round.
APPROACH
Find the Reynolds number by direct calculation. Find the drag force using thedenition of-9! Find power (* ) by using the product of force and speed: * = HDrag,!
ANALYSIS
Reynolds number
Re =, 1#
7
=(0!75m$ s) (0!475m) (1!2 kg$m3)
(18!1× 10"6N · s$m2)Re = 23' 600
Projected area
I, =012
4=0 (0!475m)2
4= 0!177m2
688
Drag force
H9 = -9
µ#, 2
2
¶I,
= (0!3)(1!2 kg$m3) (0!75m$ s)2
2
¡0!177m2
¢
H9 = 17!9× 10"3N
Power
* = H9,
=¡17!9× 10"3N
¢(0!75m$ s)
* = 13!4× 10"3W
COMMENTS
1. The drag force is about 1/50th of a Newton, which is about 1/200th of a lbf.
2. The power is about 10 milliwatts. The supplied power would need to be higherto account for factors such as propeller e"ciency and motor e"ciency.
689
PROBLEM 8.40
Situation: A 1/1 scale model of a torpedo is being tested in a wind tunnel–additionaldetails are provided in the problem statement.
Find: Air velocity in wind tunnel.
APPROACH
Dynamic similarity based on Reynolds number.
ANALYSIS
Match the Reynolds number of the model and prototype. This leads to.
,air = (10)(1$1)(1!41× 10"5$1!31× 10"6)
= 107.6 m/s
690
PROBLEM 8.41
Situation: The problem statement describes ow in a conduit (on earth) to be usedto characterize a prototype that will be build on the moon.
Find: Kinematic viscosity of uid for model on earth.
APPROACH
Dynamic similarity based on Reynolds number and Froude number.
ANALYSIS
Match Froude number
H3moon = H3earth
(,$p)2)/ = (,$
p)2)=
,G$," = ()G$)")045(2G$2")
045
= (5)045(1)
Match Reynolds number
Re" = ReG
(, 2$:)" = (, 2$:)G
:G = (,G$,"):" = (5)0450!5× (10"5) m2/s
:G = 1!119× 10"5 m2/s
691
PROBLEM 8.42
Situation: The problem statement describes a 1/15 scale model of a drying tower.
Find: Entry velocity of the model uid (water).
APPROACH
Dynamic similarity based on Reynolds number.
ANALYSIS
Match Reynolds number
Re" = Re,,"2":"
=,,2,:,
," = (2,2")(:":,),,
= (15)
µ1× 10"6
4× 10"5
¶(12 m/s)
," = 4!50 m/s
692
PROBLEM 8.43
Situation: A 1/5 scale model is being used to characterize a discharge meter–additional details are provided in the problem statement.
Find:a.) Velocity for the prototype.b.) Pressure di!erence for the prototype.
APPROACH
Dynamic similarity based on Reynolds number and pressure coe"cients.
ANALYSIS
Match Reynolds number
Reprot. = Remodel
,prot. = ,model(2model$2prot.)(:prot.$:model)
,prot. = 1(1$5)(10"5$10"6) = 2.0 m/s
Match pressure coe"cients
-,I" = -,I,(!%$#, 2)" = (!%$#,
2),!%, = !%"(#,$#")(,,$,")
2
= 3!0× (860$998)× (2!0$1!0)2
= 10.3 kPa
693
PROBLEM 8.44
Situation: Water owing through a rough pipe is to be characterized by using air owthrough the same pipe–additional details are provided in the problem statement.
Find:(a) Air velocity to achieve dynamic similarity.(b) Pressure di!erence for the water ow.
APPROACH
Dynamic similitude based on Reynolds number and pressure coe"cients.
ANALYSIS
Match Reynolds number
Reair = Rewater
(, 1#$7)air = (, 1#$7)water
,' = ,%(1%$1')(#%$#')(7'$7%)
#% = 1' 000 kg/m3
# = #'I std. atm. × (150 kPa/101 kPa)
= 1!20× (150$101) = 1!78 kg/m3
7' = 1!81× 10"5 N · s/m2
7% = 1!31× 10"3 N · s/m2
Then
,' = 1!5 m/s (1,000/1.78)(1.81× 10"5$1!31× 10"3)
,'=11.6 m/s
Match pressure coe"cients
-,& = -,2(!%$#, 2)% = (!%$#, 2)'
!%% = !%'(#%$#')(,%$,')2
= 780× (1' 000$1!78)(1!5$11!6)2
= 7' 330 Pa = 7.33 kPa
694
PROBLEM 8.45
Situation: A device for a minesweeper (a noisemaker) will be studied by using a1/5 scale model in a water tunnel–additional details are provided in the problemstatement.
Find:(a) Velocity to use in the water tunnel.(b) Force that will act on the prototype.
APPROACH
Dynamic similarity based on matching Reynolds number and pressure coe"cient.
ANALYSIS
Match Reynolds number
Retunnel = Reprototype
,tunnel = ,prot.(5
1)(:tunnel:prot.
)
,tunnel = 5(5
1)(1)
,tunnel = 25 m/s
Match pressure coe"cients
-,tunnel = -,prototyp eµ!%
#, 2
¶
tunnel
=
µ!%
#, 2
¶
prototypeµ!%tunnel!%prot.
¶=
µ#tunnel#prot.
¶µ, 2tunnel, 2prot.
¶
Multiply both sides of the equation by Itunnel$Iprot. = 225$22,!
(!%×I)tunnel(!%×I)prot.
=
µ#tunnel#prot.
¶×µ, 2tunnel, 2prot.
¶×µ252,
¶2
HtunnelHprot.
= (1
1)(5)2(
1
5)2
Htunnel = Hprot. = 2400 N
695
PROBLEM 8.46
Situation: Air forces on a building are to be characterized by using a 1/100 scalemodel–additional details are provided in the problem statement.
Find: (a) Density needed for the air in the wind tunnel.(b) Force on the full-scale building (prototype).
ANALYSIS
Reynolds number
Re" = Re,
(#, 2$7)" = (#, 2$7),
#"$#, = (,,$,")(2,$2")(7"$7,)
= (25$300)(100)(1)
= 8!33
#" = 8!33#, = 0.020 slugs/ft3
H"$H, = (!%"$!%,)(I"$I,) (1)
-,I"-,I,
=
µ!%"#",
2"
¶µ#,,
2,
!%,
¶
1 =
µ!%"!%,
¶µ#,#"
¶µ, 2,, 2"
¶
=
µ!%"!%,
¶µ1
8!33
¶µ25
300
¶2
Then!%"$!%, = 1' 200 (2)
solve Eqs. (1) and (2) for H"$H,
H"$H, = 1' 000I"$I,
= 1200(1$104) = 0!12
H, =H"0!12
= 417 lbf
696
PROBLEM 8.47
Situation: Performance of a large valve will be characterized by recording data on a1/3 scale model–additional details are provided in the problem statement.
Find:a) Flow rate to be used in the model (laboratory) test.b) The pressure coe"cient for the prototype.
ANALYSIS
Re" = Re, or (, 1#$7)" = (, 1#$7),
Then
,"$,, = (1,$1")(#,$#")(7"$7,)
Multiply both sides of above equation by I"$I, = (1"$1,)2
(I"$I,)(,"$,,) = (1,$1")(1"$1,)2(#,$#")(7"$7,)
]"$], = (1"$1,)(#,$#")(7"$7,)
= (1$3)(0!82)(10"3$(3× 10"3))]"$], = 0!0911
or ]" = ], × 0!0911
]" = 0!50× 0!0911 m3$s = 0.0455 m3/s
-,=1.07
697
PROBLEM 8.48
Situation: The moment acting on the rudder of submarine will be studied using a1/60 scale model–additional details are provided in the problem statement.
Find:(a) Speed of the prototype that corresponds to the speed in the water tunnel.(b) Moment that corresponds to the data from the model.
ANALYSIS
Match pressure coe"cients
-,1 = -,/(!%$#, 2)" = (!%$#, 2),
or!%"$!%, = (#",
2")$(#,,
2, ) (1)
Multiply both sides of Eq. (1) by (I"$I,)× (2"$2,) = (2"$2,)3 and obtain
Mom."$Mom., = (#"$#,)(,"$,,)2(2"$2,)
3 (2)
Match Reynolds numbers
,"2"$:" = ,,2,$:,,"$,, = (2,$2")(:"$:,)
(3)
Substitute Eq. (3) into Eq. (2) to obtain
+"$+, = (#"$#,)(:"$:,)2(2"$2,)
+, = +"(#,$#")(:,$:")2(2,$2")
= 2(1' 026$1' 000)(1!4$1!31)2(60)
= 141 N·m
Also
,, = 10(1$60)(1!41$1!310)
= 0.179 m/s
698
PROBLEM 8.49
Situation: A model hydrofoil is tested in a water tunnel–additional details are pro-vided in the problem statement.
Find: Lift force on the prototype.
ANALYSIS
Match pressure coe"cients
-,1 = -,/(!%$#, 2)" = (!%$#, 2),
!%"$!%, = (#"$#,)(,2"$,
2, )
Multiply both sides of the above equation by I"$I, = (2"$2,)2
(!%"$!%,)(I"$I,) = (#"$#,)(,2"$,
2, )(2
2"$2
2,) = H"$H, (1)
Match Reynolds numbers
(, 2#$7)" = (, 2#$7),
(,,$,")2 = (2"$2,)
2(#"$#,)2(7"$7")
2 (2)
Eliminating (,,$,")2 between Eq. (1) and Eq. (2) yields
H,$H" = (#"$#,)(7,$7")2
Then if the same uid is used for models and prototype, we have
H,$H" = 1
or
H, = 25 kN
699
PROBLEM 8.50
Situation: A 1/8 scale model of an automobile will be tested in a pressurized windtunnel–additional details are provided in the problem statement.
Find: Pressure in tunnel test section.
ANALYSIS
Match Mach number
+" = +,
,"$Z" = ,,$Z,;,"$,, = Z"$Z, (1)
Match Reynolds number
Re" = Re,
,"2"#"$7" = ,,2,#,$7,
or,"$,, = (2,$2")(#,$#")(7"$7,) (2)
Eliminate ,"$,, between Eqs. (1) and (2) to obtain
Z"$Z, = (2,$2")(#,$#")(7"$7,) (3)
ButZ =
pN? $# =
pc%$# =
pc%$(%$"& ) =
&c"&
Therefore Z"$Z, = 1' then from Eq. (3)
1 = (8)(#,$#")(1)
or#" = 8#,
But
# = %$"&
so
(%$"& )" = 8(%$"& ),
%" = 8%,
= 8 atm
= 0.808 MPa abs.
700
PROBLEM 8.51
Situation: A 1/8 scale model of an automobile will be tested in a pressurized windtunnel–additional details are provided in the problem statement.
Find:a) Speed of air in the wind tunnel to match the Reynolds number of the prototype.b) Determine if Mach number e!ects would be important in the wind tunnel.
ANALYSIS
Match Reynolds number
Re" = Re,
,"2"#"$7" = ,,2,#,$7,; But #"$7" = #,$7,
so," = ,,(2,$2") = 80× 10 = 800 km/hr = 222 m/s
Mach number
+ = ,$Z = 222$345 = 0!644
Because + ) 0!3' Mach number e!ects would be important .
701
PROBLEM 8.52
Situation: A satellite is entering the earth’s atmosphere–additional details are pro-vided in the problem statement.
Find: Determine if the ow is rareed.
APPROACH
Use the ratio of Mach number and Reynolds number.
ANALYSIS
Mach number and Reynolds number
+$Re = (,$Z)(7$#, 1) = (7)$(#Z1)
where
# = %$"& = 22$(1716× 393) = 3!26× 10"5 slugs/ft3
and Z = 975 ft/s and 7 = 3!0× 10"7 lbf-s/ft2 so
+$Re = 3!0× 10"7$(3!26× 10"5 × 975× 2) = 4!72× 10"6 G 1Not rareed
702
PROBLEM 8.53
Situation: Water droplets are in an air stream.Breakup occurs when .$
&Re = 0!5.
,air = 25m$ s' %air = 1!01 kPa' O = 0!073N$m!
Find: Droplet diameter for break up.
APPROACH
Apply the .$&Re = 0!5 criteria, combined with the equations for Weber number
and Reynolds number.
ANALYSIS
Weber number and Reynolds number
.$&Re =
#A, 2&:
O&, A
=, 3*2
&#A7
O
So breakup occurs when, 3*2
&#A7
O= 0!5
Solve for diameter
A =
·0!5O
, 3*2
¸2
=0!25O2
, 3#7
Calculations
A =0!25O2
, 3#7
=0!25× 0!0732
253 × 1!2× (18!1× 10"6)= 3.93 mm
703
PROBLEM 8.54
Situation: The problem statement describes breakup of a liquid jet of heptane..
Find: Diameter of droplets.
Properties: From Table A.3, # = 0!95 kg/m3!
ANALYSIS
Weber number. = 6!0 = #1, 2$O
1 = 6O$#, 2 = 6× 0!02$(0!95× (30)2) = 1!40× 10"4 m = 140 7m
704
PROBLEM 8.55
Situation: The problem statement describes breakup of a jet of water into droplets.
Find: Estimated diameter of droplets.
Properties: From Table A.3 # = 1!20 kg/m3 and from Table A.5 O = 0!073 N/m.
ANALYSIS
Weber number
. = 6!0 =#1, 2
O
1 =6O
#, 2=
6× 0!073(1!2× (20)2)
= 9!125× 10"4 m = 0.91 mm
705
PROBLEM 8.56
Situation: A model test is described in the problem statement.
Find: Relationship between kinematic viscosity ratio and scale ratio.
ANALYSIS
Match Froude numbers
H" = H,; (,&)2)" = (
,&)2),
or,",,
=
s)"2"),2,
(1)
Match Reynolds numbers
Re" = Re,; (, 2
:)" = (
, 2
:), or
,",,= (
2,2")(:":,) (2)
Eliminate ,"$,, between Eqs. (1) and (2) to obtain:s)"2"),2,
= (2,2")(:":,)' but )" = ),
Therefore: :"$:, = (2"$2,)3*2
706
PROBLEM 8.57
Situation: The spillway of a dam is simulated using a 1/20 scale model–additionaldetails are provided in the problem statement.
Find:a) Wave height (prototype).b) Wave period (prototype).
APPROACH
Dynamic similarity based on Froude number.
ANALYSIS
Match Froude number
P,P"= (
2,2")1*2
Thenwave periodprot = 2× (20)
1*2 = 8!94 s
andwave heightprot = 8 cm × 20 = 1!6 m
707
PROBLEM 8.58
Situation: A prototype of a dam is represented with a 125scale model. Other details
are provided in the problem statement.
Find:a) Velocity for prototype.b) Discharge for prototype.
APPROACH
Dynamic similarity based on Froude number.
ANALYSIS
Match Froude number
H3" = H39
,"$(()")(2"))045 = ,,$((),)(2,))
045
,,$," = (2,$2")045 = 5 (1)
,, = (2!5)(5) m/s
= 12.5 m/s
Discharge for the prototype is], = ,,I, (2)
From Eq. (1)
,, = ,"
µ2,2"
¶045(3)
From geometric similarity
I, = I"
µ2,2"
¶2(4)
Combining Eqs. 2, 3 and 4 gives
], = ,"
µ2,2"
¶045I"
µ2,2"
¶2
= ,"I"
µ2,2"
¶245
=¡0!1m3$ s
¢(25)245
= 312. 5 m3
s
708
PROBLEM 8.59
Situation: A seaplane model has a 1$12 scale.
Find: Model speed to simulate a takeo! condition at 125 km/hr.
Assumptions: Froude number scaling governs the conditions.
ANALYSIS
Match Froude number
," = ,,
s2"2,
= 125
r1
12= 36.1 m/s
709
PROBLEM 8.60
Situation: A model spillway has a 136scale.
Discharge for the prototype is 3000 m3$ s!
Find: (a) Velocity ratio.(b) Discharge ratio.(c) Model discharge
APPROACH
Dynamic similarity based on Froude number.
ANALYSIS
Match Froude number
,"$,, =q2"$2, (1)
or for this case
,"$,, =p1$36 = 1/6
Multiply both sides of Eq. (1) by I"$I, = (2"$2,)2
,"I"$,,I, = (2"$2,)1*2(2"$2,)
2
]"$], = (2"$2,)5*2
or for this case
]"$], = (1$36)5*2 = 1/7,776
]" = 3000$7776 = 0.386 m3/s
710
PROBLEM 8.61
Situation: Flow in a river is to be studied using a 1/64 scale model–additional detailsare provided in the problem statement.
Find: Velocity and depth in model at a corresponding point to that specied for theprototype.
ANALYSIS
Match Froude number
H3" = H3,
,"$(()")(2"))045 = ,,$((),)(2,))
045
," = ,,(2"$2,)045 = ,,(1$8) = 1.875 ft/s
Geometric similitude
A"$A, = 1$64
A" = (1$64)A,
= (1$64)(20) = 0.312 ft
711
PROBLEM 8.62
Situation: Details are provided in the problem statement..
Find: Velocity and discharge for prototype.
ANALYSIS
Match Froude number
,, = ,"
q2,$2" (1)
= 7!87&30
= 43.1 ft/s
Multiply both sides of Eq. (1) by I,$I" = (2,$2")2
,,I,,"I"
=
µ2,2"
¶5*2
So
],$]" = (2,$2")5*2
], = 3!53× (30)5*2
= 17,400 ft3/s
712
PROBLEM 8.63
Situation: Flow around a bridge pier is studied using a 1/10 scale model.
Find: (a) Velocity and (b)wave height in prototype.
APPROACH
Use Froude model law.
ANALYSIS
Match Froude numbers
,, = ,"
q2,$2" = 0!90
&10 = 2.85 m/s
2,$2" = 10; therefore, wave heightprot. = 10× 2!5 cm = 25 cm
713
PROBLEM 8.64
Situation: A 1/25 scale model of a spillway is tested–additional details are providedin the problem statement.
Find: Time for a particle to move along a corresponding path in the prototype.
ANALYSIS
Match Froude numbers
,,$," =q2,$2"
or
(2,$P,)$(2"$P") = (2,$2")1*2
Then
P,$P" = (2,$2")(2"$2,)1*2
P,$P" = (2,$2")1*2
P, = 1×&25 = 5 min
Also
],$]" = (2,$2")5*2
], = 0!10× (25)5*2 = 312.5 m3/s
714
PROBLEM 8.65
Situation: A tidal estuary is modeled using a 1/250 scale–additional details areprovided in the problem statement.
Find: Velocity and period in the model.
ANALYSIS
Match Froude number
H3" = H3,
or
µ,&)2
¶
"
=
µ,&)2
¶
,
(1)
,",,
= (2"2,)1*2
because )" = ),! Then
(E151)
(E/5/)=
µ2"2,
¶1*2
or
P"P,=
µ2"2,
¶1*2(2)
Then from Eq. (1)
," = ,,
µ2"2,
¶1*2= 4!0× (1$250)1*2 = 0.253 m/s
From Eq. (2)
P" = (12!5 hr) (1$250)1*2 = 0!791hr = 47.4 min
715
PROBLEM 8.66
Situation: The maximum wave force on a 1/36 scale sea wall was 80 N.& = 10! (model and prototype).
Find: Force on the wall (for the full scale prototype).
Assumptions: Fresh water (model) and seawater (prototype).
APPROACH
Dynamic similarity based on pressure coe"cient and Froude number.
ANALYSIS
Match pressure coe"cients
-,1 = -,/ ; (!%$#,2)" = (!%$#,
2),
!%"$!%, = (#"$#,)(,"$,,)2 (1)
Multiply both sides of Eq. (1) by I"$I, = 22"$22,
(!%"I")$(!%,I,) = (#"$#,)(2"$2,)2(,"$,,)
2
Match Froude numbers
,"$,, =q2"$2, (2)
Eliminating ,"$,, from Eqs. (1) and (2) yields
H"$H, = (#"$#,)(2"$2,)2(2"$2,)
H"$H, = (#"$#,)(2"$2,)3
H, = H"(#,$#")(2,$2")3 = 80(1' 026$1' 000)(36)3 = 3.83 MN
716
PROBLEM 8.67
Situation: A model of a spillway is built at a 1/25 scale–additional details areprovided in the problem statement.
Find:(a) Water discharge in model for dynamic similarity.(b) Force on the prototype.
APPROACH
Dynamic similitude based on matching pressure coe"cients and Froude numbers.
ANALYSIS
Match pressure coe"cients
-,1 = -,/ ; (!%$#,2)" = (!%$#,
2),
!%"$!%, = (#"$#,)(,"$,,)2
Multiply both sides of Eq. (1) by I"$I, = 22"$22,
(!%"I")$(!%,I,) = (#"$#,)(2"$2,)2(,"$,,)
2
H"H,
= (#"$#,)(2"$2,)2(,"$,,)
2 (1)
Match Froude number,",,=
s2"2,
(2)
Eliminate ,"$,, from Eqs. (1) and (2)
H,H"
=
µ#,#"
¶µ2,2"
¶3
H, = (22N)
µ1
1
¶µ25
1
¶3
= 344!8N
H, = 345N
Multiply both sides of Eq. (2) by I"$I, = 22"$22,
,"22"
,,22,=
µ2"2,
¶5*2
]"],
=
µ2"2,
¶5*2
]" =¡150m3$ s
¢µ 125
¶5*2
= 0!048m3$ s
717
Match Froude number
,,$," =q2,$2"
]"$], = (2"$2,)5*2
]" = 150× (1$25)5*2 = 0.048 m3/s
From solution to Prob. 8.66 we have:
H, = H"(#,$#")(2,$2")3
= 22(1$1)(25)3 = 344 kN
718
PROBLEM 8.68
Situation: A scale model of a dam will be constructed in a laboratory.
Find: The largest feasible scale ratio.
ANALYSIS
Check the scale ratio as dictated by ]"$], (see Problem 8.64)
]"$], = 0!90$5' 000 = (2"$2,)5*2
or
2"$2, = 0!0318
Then with this scale ratio
2" = 0!0318× 1' 200 m = 38.1 m
." = 0!0318× 300 m = 9.53 m
Therefore, model will t into the available space, so use
2"$2, = 1$31!4 = 0!0318
719
PROBLEM 8.69
Situation: A scale model of a ship is tested in a towing tank–additional details areprovided in the problem statement.
Find: Speed for the prototype that corresponds to the model test.
APPROACH
Dynamic similarity based on Froude number.
ANALYSIS
Match Froude number
,"$p)"2" = ,,$
p),2,
,, = ,"p2,$
p2"
= (4 ft/s) (150/4)1*2
,,=24.5 ft/s
720
PROBLEM 8.70
Situation: A scale model (1/25) of a ship is described in the problem statement.
Find: (a) Velocity of the prototype.(b) Wave resistance of the prototype.
ANALYSIS
Follow the solution procedure of Prob. 8.66:
,"$,, =q2"$2,; ,, = 5×
&25 = 25 ft/s
H"$H, = (2"$2,)3; H, = 2(25)
3 = 31,250 lbf
721
PROBLEM 8.71
Situation: A scale model (1/20) of a ship is described in the problem statement.
Find: (a) Velocity of the prototype.(b) Wave resistance of the prototype.
ANALYSIS
Match Froude number
H3" = H3,,"
()"2")045=
,,(),2,)045
,, = ,"
µ2,2"
¶045= 17.9 m/s
Calculate force
H, = (25 N)µ2,2"
¶3
= (25)(20)3
H, = 200' 000N
H, = 200 kN
722
PROBLEM 8.72
Situation: A scale model¡120
¢of a building is being tested–details are provided in
the problem statement.
Find: Drag on the prototype building.
Assumptions: -,1 = -,/ , #" = #,
ANALYSIS
Match pressure coe"cients
(!%$(#, 2$2)" = (!%$(#, 2$2),
!%"$!%, = (#"$#,)(,2"$,
2, )
Assuming #" = #,
H"$H, = (!%"$!%,)(I"$I,) = (,"$,,)2(2"$2,)
2
(H,$H") = (40$20)2(20)2
H, = (200 N)(4)(400) = 320' 000 N = 320 kN
Choice (d) is the correct.
723
PROBLEM 8.73
Situation: A scale model¡1250
¢of a building is being tested–details are provided in
the problem statement.
Find:(a) Pressure values on the prototype.
• windward wall
• side wall
• leeward wall
(b)Lateral force on the prototype in a 150 km/hr wind.
Assumptions: -,Imodel = -,Iprot.
ANALYSIS
Match pressure coe"cients-,Imodel = -,Iprot.
then
!%,$((1$2)#,,2, ) = -,/ = -,1
or
!%, = -,1((1$2)#,,2, )
= -,1 × (1$2)× 1!25× (150' 000$3' 600)2
%" %0 = 1085!6-,1
but %0 = 0 gage so
% = 1085!6-,1 Pa
Extremes of pressure are therefore:
%windward wall = 1!085 kPa
%side wall = 1085!6× ("2!7) = -2.93 kPa
%leeward wall = 1085× ("0!8) = -868 Pa
Lateral Force:!%"$!%, = ((1$2)#",
2")$((1$2)#,,
2, )
724
Multiply both sides of equation by I"$I, = 22"$22,
(!%"I")$(!%,I,) = (#"$#,)(,2"$,
2, )(2
2"$2
2,) = H"$H,
H,$H" = (#,$#")(,2, $,
2")(2
2,$2
2")
H, = 20(1!25$1!20)((150' 000$3' 600)2$(20)2)(250)2
H, = 5!65 MN
725
PROBLEM 8.74
Situation: Drag force is measured in a water tunnel and a wind tunnel–details areprovided in the problem statement.
Find:(a) Find the relevant 0-groups.(b) Write a computer program and reduce the given data.(c) Plot the data using the relevant 0-groups.
ANALYSIS
Performing a dimensional analysis shows that
Z,L? 292 = b(
L? 9/)
The independent variable is the Reynolds number. Plotting the data using the di-mensionless numbers gives the following graph.
Reynolds number
0 2e+5 4e+5 6e+5 8e+5 1e+6
Forc
e co
effic
ient
0.005
0.010
0.015
0.020
0.025
0.030
0.035
Water Air
726
PROBLEM 8.75
Situation: Pressure drop is measured in a pipe with (a) water and (b) oil. Detailsare provided in the problem statement.
Find:(a) Find the relevant 0-groups(b) Write a computer program and reduce the given data(c) Plot the data using the relevant 0-groups
ANALYSIS
Performing a dimensional analysis on the equation for pressure drop shows
!,9EL? 2
= b(L? 9/)
where the independent parameter is Reynolds number. Plotting the data using thedimensionless parameters gives the following graph.
Reynolds number
0 1e+5 2e+5 3e+5 4e+5 5e+5 6e+5
Dim
ensi
onle
ss p
ress
ure
drop
0.006
0.008
0.010
0.012
0.014
0.016
0.018
0.020
Water Crude oil
727
PROBLEM 9.1
Situation: A block sliding on an oil lm is described in the problem statement.
Find: Terminal velocity of block.
APPROACH
Apply equilibrium. Then relate shear force (viscous drag force) to viscosity and solvethe resulting equation.
ANALYSIS
Equilibrium
Hshear = . sin K
B = Hshear$I& =. sin K$22
Shear stressB = 7A,$A? = 7× ,$!?
W
!
Fshear
L
L
"y
or
, = B!?$7
Then
, = (. sin K$22)!?$7
, = (150 sin 10!$0!352)× 1× 10"4$10"2
, = 2.13 m/s
728
PROBLEM 9.2
Situation: A board sliding on an oily, inclined surface is described in the problemstatement.
Find: Dynamic viscosity of oil
ANALYSIS
From the solution to Prob. 9.1, we have
7 = (. sin K$22)!?$,
7 = (40× (5$13)$32)× (0!02$12)$0!5
7 = 5!70× 10"3 lbf-s/ft2
729
PROBLEM 9.3
Situation: A board sliding on an oily, inclined surface is described in the problemstatement.
Find: Dynamic viscosity of oil.
ANALYSIS
From the solution to Prob. 9.1, we have
7 = (20× (5$13)$12)× 5× 10"4$0!12
7 = 3!20× 10"2 N·s/m2
730
PROBLEM 9.4
Situation: Uniform, steady ow occurs between two plates—additional details areprovided in the problem statement.
Find: (a) Other conditions present to cause odd velocity distribution.(b) Location of minimum shear stress.
ANALYSIS
Upper plate is moving to the left relative to the lower plate.
Minimum shear stress occurs where the maximum velocity occurs (where A@$A? =0).
731
PROBLEM 9.5
Situation: A laminar velocity distribution is described in the problem statement.
Find: Whether statements (a) through (e) are true or false.
ANALYSIS
a). True b). False c). False d). False e). True
732
PROBLEM 9.6
Situation: A plate being pulled over oil is described in the problem statement.
Find: (a) Express the velocity mathematically in terms of the coordinate systemshown.(b) Whether ow is rotation or irrotational.(c) Whether continuity is satised.(d) Force required to produce plate motion.
ANALYSIS
By similar triangles @$? = @max$!P
y "y
Umax
U
U
or
@ = (@max$!?)?
@ = (0!3$0!002)? m/s
@ = 150 y m/s
; = 0
For ow to be irrotational [@$[? = [,$[E here [@$[? = 150 and [,$[E = 0 . Theequation is not satised; ow is rotational .[@$[E+ [;$[? = 0 (continuity equation) [@$[E = 0 and [;$[? = 0so continuity is satised.Use the same formula as developed for solution to Prob. 9-1, but . sin K = Hshear!Then
H& = I7,$P
H& = 0!3× (1× 0!3)× 4$0!002
H&=180 N
733
PROBLEM 9.7
Situation: The gure in problem 2.30 is for the velocity distribution in a liquid suchas oil.
Find: Whether each of the statements (a) though (e) is true or false.
ANALYSIS
Valid statements are (c), (e).
734
PROBLEM 9.8
Situation: A wire being pulled though a tube is described in the problem statement.
Find: Viscous shear stress on the wire compared to that on the tube wall.
ANALYSIS
The shear force is the same on the wire and tube wall; however, there is less area inshear on the wire so there will be a greater shear stress on the wire.
735
PROBLEM 9.9
Situation: Two plates in oil are described in the problem statement.
Find: Derive an equation for the velocity of the lower plate.
Assumptions: A linear velocity distribution within the oil.
ANALYSIS
The velocity distribution will appear as below:
Equilibrium
(Force on top of middle plate) = (Force on bottom of middle plate)
B 1I = B 2I
B 1 = B 2
71!,1$P1 = 72!,2$P2
71 × (, " ,lower)$P1 = 72,lower$P2
, 71$P1 " 71,lower$P1 = 72,lower$P2
,lower(72$P2 + 71$P1) = , 71$P1
,lower = (, 71$P1)$(72$P2 + 71$P1)
736
PROBLEM 9.10
Situation: A disk in oil is described in the problem statement.
Find: Torque required to rotate disc.
ANALYSIS
B = 7A;$A?
B = 73J$!?
A& = 3AH
A& = 3BAI
A& = 3(73J$!?)203A3
! y
dr
Plan View
&
Then
& =
Z K
0
A& =
Z K0
0
(7J$!?)2033A3
& = (207J$!?)34$4|K00 = 207J340$(4!?)
For
!? = 0!001 ft; 30 = 6” = 0!50 ft; J = 180× 20$60 = 60 rad/s7 = 0!12 lbf-s/ft2
& = (2× 0!12× 60$0!001)(0!54$4)& = 222 ft-lbf
737
PROBLEM 9.11
Situation: A disk in oil is described in the problem statement.
Find: Torque required to rotate disk.
ANALYSIS
From the solution to Prob. 9.10, we have
& = 207J340$(4!?)
where
3 = 0!10 m
!? = 2× 10"3 mJ = 10 rad/s
7 = 6 N · s/m2
& = 20 × 8× 10× 10"4$(4× (2× 10"3))
& = 6.28 N·m
738
PROBLEM 9.12
Situation: A cone in oil is described in the problem statement.
r& !
T)
r0
Find: Derive an equation for the torque in terms of the other variable.
Assumptions: K is very small.
ANALYSIS
A& = (7@$9)AI× 3= 73J sin`2032A3$(3K sin`)
= 207J32A3$K
& = (7J$K)(2033$3)|K00& = (2/3)03307J$K
739
PROBLEM 9.13
Situation: A plate in glycerin is described in the problem statement.
Find:a) Sketch the velocity distribution at section I"I.b) Force required to pull plate.
Properties: Glycerin (Table A.4): 7 = 1!41N · s$m2!
ANALYSIS
Velocity distribution:
V=0.4 m/s
H = BI
= 7A,
A?I
=¡1!41N · s$m2
¢µ0!4m$ s0!002m
¶× 1m× 2m× 2 sides
= 1128N
H = 1130 N
740
PROBLEM 9.14
Situation: A bearing is described in the problem statement.
Find: Torque required to turn bearing.
ANALYSIS
B = 7,$i
& = BI3
where & = torque, I = bearing area = 203>
& = B203>3 = B2032>
= (7,$i)(2032>)
where V=rJ! Then
= (7$i)(3J)(2032>)
= (7$i)(20J)33>
= (0!1$0!001)(20)(200)(0!009)3(0!1)
& = 9!16× 10"4N · m
741
PROBLEM 9.15
Situation: A shaft turning inside a stationary cylinder is described in the problemstatement.
Find: Show that the torque per unit length acting on the inner cylinder is given by& = 407J32&$(1" (32&$32!)!
ANALYSIS
Subscript 9 refers to inner cylinder. Subscript U refers to outer cylinder. The cylinderis unit length into page.
*
"rr
*+
s
&& = B(203)(3)
&! = B(203)(3) + A$A3(B203 · 3)!3&& " &! = 0
A$A3(B2032L)!3 = 0; A$A3(B32) = 0
Since there is no angular acceleration, the sum of the torques must be zero. Therefore
&& " &! = 0
A$A3(B2032)!3 = 0
A$A3(B32) = 0
Then
B32 = -1
B = 73(A$A3)(,$3)
So
733(A$A3(,$3)) = -1
7(A$A3(,$3)) = -13"3
Integrating,7;$3 = ("1$2)-13"2 + -2
742
At 3 = 3!, ; = 0 and at 3 = 3&, ; = 3&J so
-1 = 2-2320
7J = -2(1" 320$32&)
-2 = 7J$(1" 320$32&)
Then
B & = -13"2& = 2-2(30$3&)
2 = 27J320$(32& " 3
20) = 27J$((3
2&$3
20)" 1)
So&& = B203
2& = 407J3
2&$((3
2&$3
20)" 1)
which is the torque on the uid. Torque on shaft per unit length
& = 407J32&$(1" (32&$3
20)
743
PROBLEM 9.16
Situation: A shaft turning inside a stationary cylinder is described in the problemstatement.
Find: Power necessary to rotate shaft.
APPROACH
Apply the equation developed in Problem 9.15.
ANALYSIS
& = 407JL32&$(1" (32&$3
20))
= 40 × 0!1× (50)(0!01)20!03$(1" (1$1!1)2)= 0!00109 N ·m
* = &J
= (0!00109 N ·m) (50 s"1)
* = 0.0543 W
744
PROBLEM 9.17
Situation: A viscosity measuring device is described in the problem statement.
Find: Viscosity of uid.
APPROACH
Apply the equation developed in Problem 9.15.
ANALYSIS
& = 0!6(0!02) = 0!012 N ·m7 = & (1" 32&$3
20)$(40JL3
2&)
= 0!012(1" 22$2!252)$(40(20)(20$60)(0!1)(0!02)2)
7 = 2.39 N·s/m2
745
PROBLEM 9.18
Situation: Oil ows down an inclined surface —additional details are provided in theproblem statement.
Find: (a) Maximum and (b) mean velocity of ow.
ANALYSIS
@ = () sin K$2:)?(2A" ?)
@max occurs at the liquid surface where ? = A' so
@max = () sin K(2:))A2
where K = 30!' : = 10"3 m2/s and A = 2!0× 10"3 m@max = (9!81× sin 30!$(2× 10"3))× (2!0× 10"3)2
= 9!81× 10"3 m/s
@max = 9!81mm$ s
, = ()A2 sin K)$(3:)
= 9!81× (2!0× 10"3)2 sin 30!$(3× 10"3)
, = 6!54mm$ s
746
PROBLEM 9.19
Situation: SAE 30W oil (100 !F) ows down an inclined surface (K = 20!) !The Reynolds number is 200.
Find: (a) Depth of oil(b) discharge per unit width.
Properties: SAE 30W oil (100 !F) properties (from Table A.4) are ( = 55!1 lbf$ ft3,7 = 0!002 lbf · s$ ft2' : = 0!0012 ft2$ s!
ANALYSIS
Flow rate equation.^ = , A (1)
Reynolds number
Re =, A
:(2)
Combine Eqs. (1) and (2)Re =
^
:
^ = Re×:= 200×
¡0!0012 ft2$ s
¢
= 0!240 ft2$ s
^ = 0!240 ft2/ s
Since the ow is laminar, apply the solution for ow down an inclined plane.
^ =
µ1
3
¶µ(
7
¶A3 sin (K)
0!24 ft2$ s =
µ1
3
¶µ55!1 lbf$ ft3
0!002 lbf · s$ ft2
¶A3 sin (20!)
Solving for depth (A)A = 0!0424 ft = 0!509 in
747
PROBLEM 9.20
Situation: Water ows down a roof —additional details are provided in the problemstatement.2 = 15 ft; "K = 0!4 in./hr. = 9!26 × 10"6 ft/s, 7 = 2!73 × 10"5 lb-s/ft2; ( = 62!4lbf/ft3; K = 10!!
Find: (a) Depth.(b) Average velocity.
ANALYSIS
Flow rate equationTotal discharge per unit width of roof is:
^ = 2× 1×"K (1)
where "K = rainfall rate. But Eq. 9.8
^ = (1$3)(($7)A3 sin K
orA = (3^7$(( sin K))1*3 (2)
Combining equations 1 and 2, gives
A = (32"K7$(( sin K))1*3
A = (3× 15× 9!26× 10"6 × 2!73× 10"5$(62!4× sin 10!))1*3
= 1!02× 10"3 ftA = 0.012 in.
Using Eq. 9.9a, = 0!137 ft/s
748
PROBLEM 9.21
Situation: Flow occurs between two plates—additional details are provided in theproblem statement.
Find: Shear (drag) force on lower plate.
ANALYSIS
@ = "(($27)(D? " ?2)AM$A9
@max occurs at ? = D$2 so
@max = "(($27)(D2$2"D2$4)AM$A9 = "(($27)(D2$4)AM$A9
From problem statement A%$A9 = "1200 Pa/m and AM$A9 = (1$()A%$A9! Also D = 2mm= 0!002 m and 7 = 10"1N·s/m2! Then
@max = "(($27)(D2$4)((1$()("1' 200))= (D2$87)(1' 200)
= (0!0022$(8× 0!1))(1' 200)= 0!006 m/s
@max = 6.0 mm/s
H& = BI = 7(A@$A?)× 2× 1!5B = 7× ["(($27)(D " 2?)AM$A9]
but Bplate occurs at ? = 0! So
H& = "7× (($27)×D × ("1' 200$()× 3 = (D$2)× 1' 200× 3= (0!002$2)× 1' 200× 3
H& = 3.6 N
749
PROBLEM 9.22
Situation: Flow occurs between two plates—additional details are provided in theproblem statement.
Find: Maximum uid velocity in E"direction.
APPROACH
Same solution procedure applies as in Prob. 9.21.
ANALYSIS
From the solution to Prob. 9.21, we have
@max = "((D2$87)((1$()(A%$A9))= "(0!012$(8× 10"3))("12)
@max = 0.150 ft/s
750
PROBLEM 9.23
Situation: Flow occurs between two plates—additional details are provided in theproblem statement.
Find: Direction of ow.
APPROACH
Flow will move from a location high energy to a location of low energy. For steadyow in a constant area pipe, energy is proportional to piezometric head (M) !
ANALYSIS
M= = (%=$() + R= = (150$100) + 0 = 1!5
M> = (%>$() + R> = (100$100) + 1 = 2
M> F M=
Therefore ow is from D to I: downward
751
PROBLEM 9.24
Situation: Glycerin ows downward between two plates—additional details are pro-vided in the problem statement.
Find: Discharge per unit width.
Properties: Table A.4 (Glycerin) 7 = 1!41 N·s/m2 and : = 1!12× 10"3m2$ s!
Assumptions: Flow will be laminar.
ANALYSIS
^ = "D3(
127
AM
A9
AM$A9 = A$A9(%$( + R)
= (1$()A%$A9+ AR$A9
= "1
Then
^ = "µD3(
127
¶("1)
= "µ0!0043 × 12' 30012× 1!41
¶("1)
^ = 4! 65× 10"5 m2/s
Now check to see if the ow is laminar (Reynolds number G 1' 000)
Re = , D$: = ^$:
=4! 65× 10"5 m2$ s1!12× 10"3m2$ s
Re = 0!0415 * Laminar
Therefore, the original assumption of laminar ow was correct.
752
PROBLEM 9.25
Situation: Flow occurs between two plates—additional details are provided in theproblem statement.
Find: Maximum uid velocity in R"direction.
ANALYSIS
The expression for @max is
@max = "D2(
87
AM
A9
where
AM$A9 = AM$AR = A$AR(%$( + R)
= (1$()A%$AR + 1
= (1$(0!8× 62!4))("8) + 1 = "0!16 + 1 = 0!840
Then
@max = "((0!8× 62!4× 0!012)$(8× 10"3)(0!840)
@max = "0!524 ft/s
Flow is downward.
753
PROBLEM 9.26
Situation: Flow occurs between two plates—additional details are provided in theproblem statement.
Find: Maximum uid velocity in R-direction.
ANALYSIS
@max = "D2(
87
AM
A9
where
AM$A9 = AM$AR = A$AR(%$( + R)
= (1$()A%$AR + 1
= (1$(0!85× 9' 810)("10' 000) + 1= "0!199
Then
@max = "(0!85× 9' 810× 0!0022)$(8× 0!1)("0!199)= 0!0083 m/s
@max = 8.31 mm/s
Flow is upward.
754
PROBLEM 9.27
Situation: Flow occurs between two plates—additional details are provided in theproblem statement.
Find: Maximum uid velocity in R-direction.
ANALYSIS
From solution to Prob. 9.21 we have
@max = "D2(
87
AM
A9
where
AM$A9 = AM$AR = A$AR(%$( + R)
= (1$()A%$AR + 1
= (1$(0!8× 62!4))("60)) + 1 = "0!202
Then
@max = "(0!8× 62!4× 0!012)$(8× 0!001)("0!202)
@max = +0.126 ft/s
The ow is upward.
755
PROBLEM 9.28
Situation: Flow occurs between two plates—additional details are provided in theproblem statement.
Find: Pressure gradient in the direction of ow.
Properties: From Table A.4 7 = 2× 10"3 lbf·s/ft2; ( = 55!1 lbf/ft3!
ANALYSIS
Flow rate and maximum velocity
, = ^$D
= 0!009$(0!09$12)
= 1!20 ft/s
@max = (3$2), = 1!8 ft/s
60o
@max = "D2(
87
AM
A9
AM
A9= "
µ87@max(D2
¶
= "µ8× (2× 10"3)× 1!855!1× (0!09$12)2
¶
= "9! 29
ButAM$A9 = (1$()A%$A9+ AR$A9
where AR$A9 = "0!866! Then
"9! 29 = (1$()A%$A9" 0!866A%$A9 = (("9! 29 + 0!866)
= 55!1("9! 29 + 0!866)= "464! 1
756
A%$A9 = -464 psf/ft
757
PROBLEM 9.29
Situation: Flow occurs between two plates—additional details are provided in theproblem statement.
Find: Pressure gradient in direction of ow.
ANALYSIS
From the solution to Prob. 9.28, we have
, = ^$D
= 24× 10"4$(0!002)= 1!2 m/s
@max = (3$2), = 1!8 m/s
AM
A9= "
87@max(D2
AM$A9 = "8× 0!1× 1!8$(0!8× 9' 810× 0!0022) = "45!87
ButAM$A9 = (1$()A%$A9+ AR$A9
where AR$A9 = "0!866!Then
"45!87 = (1$()A%$A9" 0!866A%$A9 = (("45!87 + 0!866)
A%$A9 = -353 kPa/m
758
PROBLEM 9.30
Situation: Flow occurs between two plates—additional details are provided in theproblem statement.
Find: (a) Derive an expression for the velocity distribution between the plates as afunction of (' ?' 2' 7' and \!(b) Determine the plate velocity as a function of (' 2' and 7 for which the dischargeis zero.
ANALYSIS
Consider the uid element between the plates
y
Fluid element
Us
Consider the forces on the uid element
* "y s * "y+ y" s
W
"B 3!9+ (3+!&?!9" (!9!? = 0
Divide by !9!?"B 3!?
+B 3+!3!?
" ( = 0
Take the limit as !? approaches zero
AB$A? = (
ButB = 7A@$A?
759
SoA
A?(7A@$A?) = (
Integrate
7A@$A? = (? + -1
A@$A? =(
7? + -1
Integrate again
@ =(
7
?2
2+ -1? + -2
Boundary Conditions: At ? = 0' @ = 0 and at ; = 2' @ = \! Therefore,
-2 = 0 and -1 =\
2"(
7
2
2
@ = R/32
2+³UE+ R
/E2
´?
The discharge per unit dimension (normal to page) is given by
^ =
Z E
0
@A?
=
Z E
0
·(
7
?2
2+
µ\
2"(
7
2
2
¶?
¸A?
=(
7
?3
6+\?2
22"(
7
2?2
4|E0
=(
7
23
6+\2
2"(
7
23
4
For zero discharge\2
2=(23
47"(
7
23
6or
\ = 16R/22
760
PROBLEM 9.31
Situation: The ow of mud is described in the problem statement.
Find: (a) Relationships between variables and determine velocity eld.(b) Determine the velocity eld when there is ow.
Assumptions: Unit dimension normal to page.
ANALYSIS
(a) First consider the forces on an element of mud !E long and ?0 deep as shownbelow.
"x
yo
W sin!* ", x
W
There will be no motion if (?0 sin K G B 0(b) Consider forces on the element of mud shown below.
"x
W sin!-*.x
"y ( +(d /dy) y)* * "
XH$ = 0
"B!E+ (B + (AB$A?)!?)!E = 0(AB$A?)!? " ( sin K!? = 0
AB$A? = "( sin K
B = "Z( sin KA? + -
= "( sin K? + -
when ? = 0' B = 0 so
- = ( sin K?0
B = "( sin K? + ( sin K?0 (1)
andB = ( sin K(?0 " ?)
761
But for the mudB = B 0 + gA@$A? (2)
Eliminate B between equations (1) and (2)
B 0 + gA@$A? = ( sin K(?0 " ?)A@$A? = [( sin K(?0 " ?)" B 0] $g (3)
Upon integration
@ = (1$g)£( sin K(?0? " ?2$2)" B 0?
¤+ -
when? = 0' @ = 0 =! - = 0
If B G B 0' A@$A? = 0! Transition point is obtained from Eq. (3)
0 = (( sin K(?0 " ?)" B 0)B 0 = ( sin K(?0 " ?)B 0 = ( sin K?0 " ( sin K?
? =( sin K?0 " B 0
( sin K(4)
?T = ?0 " (B 0$( sin K) (5)
When 0 G ? G ?5K' B F B 0 and
@ = [( sin K(??0 " ?2$2)" B 0?] $g (6)
When ?5K G ? G ?0' B G B 0 so @ = @max = @5K and the velocity distribution is shownon the gure.
yutr
uytr
y0
762
PROBLEM 9.32
Situation: Glycerin ows between two cylinders —additional details are provided inthe problem statement.
Find: Discharge.
Properties: Table A.4 (Glycerin) 7 = 1!41 N·s/m2 and : = 1!12× 10"3m2$ s!
ANALYSIS
Discharge per unit width between two stationary plates is given by Eq. 9.12. Multiplethis by the average width of the channel
¡01¢to give
] = "µD3(
127
¶µAM
A9
¶01
The change in piezometric head (M) with position (9) is given by
AM
A9=
A(\R+ R)
A9
=AR
A9= "1
Combining equations gives
] =
µD3(
127
¶01
=
µ(0!0013m3) (12' 300N$m3)
12× (1!41N · s$m2)
¶× 0 × (0!029m)
= 6!62× 10"8m3$ s
] = 6!62× 10"8m3$ s
763
PROBLEM 9.33
Situation: A bearing is described in the problem statement.
Find: Amount of oil pumped per hour.
ANALYSIS
H = %avg. ×I= 1$2 %max ×I= 1$2 %max × 0!3 m× 1 m
or
%max = 2H$0!3 m2 = 2× 50' 000$0!30= 333' 333 N/m2
Then A%$A9 = "333' 333 N/m2$0!15 m = "2' 222' 222 N/m3! For ow between wallswhere sin K = 0, we have
@max = "(($27)(D ×D$2"D2$4)(A$A9(%$())@max = "(D2$87)A%$A9,avg. = 2$3@max
= "(1$12)(D2$7)A%$A9
Then^per side = , D = "(1$12)(D3$7)A%$A9
and
^total = 2, D = "(1$6)(D3$7)A%$A9= "(1$6)× ((6× 10"4 m)3$(0!2 N · s/m2))×"2' 222' 222 N/m3)= 4!00× 10"4 m3/s
^ = 1!44 m3/hr
764
PROBLEM 9.34
Situation: Couette ow —described in section 9.2.
Find: Velocity distribution.
APPROACH
Apply the continuity principle and Navier-Stokes equation.
ANALYSIS
The ow is steady and incompressible. There is no pressure gradient in the owdirection. Let E be in the ow direction and ? is the cross-stream direction. In theCouette ow problem
[@
[E= 0
so from the continuity principle
[;
[?= 0
or ; =constant. The constant must be zero to satisfy the boundary conditions.The E-component of the Naiver Stokes equation reduces to
A2@
A?2= 0
Integrating twice gives
@ = -1? + -2
Applying the boundary conditions that @(0) = 0 and @(2) = \ gives
@ = \ 3E
765
PROBLEM 9.35
Situation: This problem involves an Ei!el-type wind tunnel.
Test section width (square) is . = 457mm! Test section length is 2 = 914mm.
Find: Find the ratio of maximum boundary layer thickness to test section width(i (E = 2) $. ) for two cases:(a) Minimum operating velocity (\! = 1m$ s).(b) Maximum operating velocity (\! = 70m$ s).
Properties: Air properties from Table A.3. At & = 20 !C and % = 1atm' : =15!1× 10"6m2$ s!
APPROACH
Calculate the Reynolds number to establish if the boundary layer ow is laminar orturbulent. Then, apply the appropriate correlation for boundary layer thickness (i.e.for i)!
ANALYSIS
Reynolds number for minimum operating velocity
ReE =\!2
:
=(1m$ s) (0!914m)
(15!1× 10"6m2$ s)= 60' 530 (minimum operating velocity)
Since ReE ' 500' 000, the boundary layer is laminar.
Correlation for boundary layer thickness (laminar ow)
i =5E
Re1*2$
=5× (0!914m)&60' 530
= 18!57mm
766
Ratio of boundary layer thickness to width of the test section
i
.=18!57mm
457mm
i$. = 0!0406 (minimum operating velocity)
Reynolds number (maximum operating velocity)
ReE =\!2
:
=(70m$ s) (0!914m)
(15!1× 10"6m2$ s)= 4' 237' 000 (maximum operating velocity)
Since ReE ) 500' 000, the boundary layer is turbulent.
Correlation for boundary layer thickness (turbulent ow):
i =0!16E
Re1*7$
=0!16× (0!914m)(4' 237' 000)1*7
= 16!53mm
Ratio of boundary layer thickness to width of the test section
i
.=16!53mm
457mm
i$. = 0!036 (maximum operating velocity)
COMMENTS
1. Notice that the boundary layer is slightly thinner for the maximum velocity.
2. In both cases (maximum and minimum velocity), the boundary layer thicknessis only a small fraction of the width.
767
PROBLEM 9.36
Situation: A uid ows over a horizontal plate, giving the shear stress distributionshown in the sketch.
The speed of the uid free stream is \! = 2!4m$ s.The plate is an isosceles triangle with 2 = 1!5m!
Find: Find the viscous drag force in newtons on the top of the plate.
APPROACH
Since shear stress (B !) is the tangential force per unit area, integrate over area to ndthe drag force.
ANALYSIS
Viscous drag force (H&)
H& =
Z
Area
B !(E)AI
AI = .AE
H& =
EZ
0
B !(E). (E)AE
Plate width. (E) = 2" E
Shear stress distribution (C = 10Pa and > = 8Pa)
B !(E) = C" >E
2
768
Combine equations & integrate
H& =
EZ
0
B !(E). (E)AE
=
EZ
0
³C" >
E
2
´(2" E) AE
=
EZ
0
µC2" CE" >E+
>E2
2
¶AE
=
µC
2">
6
¶22
=
µ10
2"8
6
¶Pa× (1!5m)2
H& = 8!25N
769
PROBLEM 9.37
Situation: A thin plate is held stationary in a stream of water—additional details areprovided in the problem statement.
Find: (a) Thickness of boundary layer.(b) Distance from leading edge.(c) Shear stress.
APPROACH
Find Reynolds number. Then, calcuate the boundary layer thickness and shear stresswith the appropriate correlations
ANALYSIS
Reynolds number
Re = \0E$:
E = Re :$\0
= 500' 000× 1!22× 10"5$5
E = 1!22 ft
Boundary layer thickness correlation
i = 5E$Re1*2$ (laminar ow)
= 5× 1!22$(500' 000)1*2
= 0!0086 ft
i = 0.103 in.
Local shear stress correlation
B 0 = 0!3327(\0$E) Re1*2$
= 0!332× 2!36× 10"5(5$1!22)× (500' 000)1*2
B 0 = 0.0227 lbf/ft2
770
PROBLEM 9.38
Situation: Flow over a smooth, at plate —additional details are provided in theproblem statement.
Find: Ratio of the boundary layer thickness to the distance from leading edge justbefore transition.
ANALYSIS
Boundary layer thickness
i$E = 5$Re1*2$ (laminar ow)
= 5$(500' 000)1*2
i$E = 0.0071
771
PROBLEM 9.39
Situation: A horizontal plate (part of an engineered system for sh bypass) dividesa ow of water into two streams.
Water temperature is & = 40 !FFree stream velocity is \! = 12 ft$ s!Plate dimensions are 2 = 8 ft and . = 4 ft!
Find: Calculate the viscous drag force on the plate (both sides).
Properties: From Table A.5. Kinematic viscosity is : = 1!66× 10"5 ft2$ s! Densityis # = 1!94 slug$ ft3!
APPROACH
Find the Reynolds number to establish whether the boundary layer is laminar ormixed. Select the appropriate correlation for average resistance coe"cient (-() !Then, calculate the shear (i.e. drag) force (H&).
ANALYSIS
Reynolds Number.
ReE =\!2
:
=(12 ft$ s) (8 ft)¡16!6× 10"6 ft2$ s
¢ = 5' 783' 000
Thus, the boundary layer is mixed.
Average shear stress coe"cient
-( =0!523
ln2 (0!06ReE)"1520
ReE
=0!523
ln2 (0!06× 5' 783' 000)"
1520
5' 783' 000= 0!00295
Surface resistance (drag force)
H& = -(#, 2
2I
= 0!00295
¡1!94 slug$ ft3
¢(12 ft$ s)2
2(2× 8 ft× 4 ft)
= 26!38 lbf
H& = 26!4 lbf
772
PROBLEM 9.40
Situation: Flow over a smooth, at plate —additional details are provided in theproblem statement.
Find: Ratio of shear stress at edge of boundary layer to shear stress at the platesurface: B ^$B 0
ANALYSIS
At the edge of the boundary layer the shear stress, B ^, is approximately zero. There-fore, B ^$B 0 ! 0! Choice (a) is the correct one.
773
PROBLEM 9.41
Situation: Air ows over a device that is used to measure local shear stress—additionaldetails are provided in the problem statement.
Find: Force due to shear stress on the device
Assumptions: Over the length of the device (1 cm), assume that the local shear stresscoe"cient (Z() equals the average shear stress coe"cient (-() !
ANALYSIS
Reynolds number
Re$ =\E
:
=(25m$ s)× (1m)(1!5× 10"5m2$ s)
= 1!667× 106
Local shear stress coe"cient (turbulent ow)
Z( =0!455
ln2 (0!06Re$)
=0!455
ln2 (0!06× 1!667× 106)= 0!003433
Surface resistance (drag force)
H& = -(#\2!2I
= Z(#\2!2I
= 0!003433(1!2 kg$m3) (25m$ s)2
2(0!01m)2
= 1! 287× 10"4N
H& = 1!29× 10"4N
774
PROBLEM 9.42
Situation: The velocity prole and shear stress for ow over a at plate are describedin the problem statement.
Find: Equation for boundary layer thickness.
ANALYSIS
@$\0 = (?$i)1*2
B 0 = 1!66\07$i
B 0 = #\20A$AE
Z ^
0
(@$\0(1" @$\0))A?
= #\20A$AE
Z ^
0
((?$i)1*2 " (?$i))A?
= #\20A$AE[(2$3)(?$i)3*2 " 1$2(?$i)2]^0
1!66\07$i = (1$6)#\20Ai$AE
iAi$AE = 9!967$(#\0)
i2$2 = 9!967E$(#\0) = 9!96E2$Re$
i = 4!46E$Re1*2$
For the Blasius solution i = 5E$Re1*2
775
PROBLEM 9.43
Situation: Flow over a at plate —additional details are provided in the problemstatement.
Find: Liquid velocity 1 m from leading edge and 1 mm from surface.
APPROACH
Calculate Reynolds number and then use gure 9-6.
ANALYSIS
Reynolds numberRe$ = , E$: = 1× 1$2× 10"5 = 50' 000
The boundary layer is laminar. Use Fig. 9-6 to obtain @$\0
?Re045$ $E = 0!001(5× 104)045$1 = 0!224
Then from Fig. 9.6 @$\0 ! 0!075 ; @ = 0!075 m/s
776
PROBLEM 9.44
Situation: Flow over a thin, at plate —additional details are provided in the problemstatement.
Find: Skin friction drag on one side of plate.
ANALYSIS
Reynolds number
ReE = 1!5× 105
-( = 1!33$Re045E= 0!00343
Surface resistance (drag force)
H$ = -(D2#\2$2
= !00343× 1× 3× 1' 000× 12$2
H$ = 5!15 N
777
PROBLEM 9.45
Situation: Flow over a smooth, at plate —additional details are provided in theproblem statement.
Find: Velocity 1 m downstream and 3 mm from plate.
ANALYSIS
Reynolds number
Re$ = \E$:
= 5× 1$10"4
= 5× 104
Since Re$ ' 500' 000, the boundary layer is laminar.
Laminar velocity prole (use Fig. 9-6 to obtain @$\0)
?Re045$E
=(0!003)(5× 104)045
1= 0!671
Then from Fig. 9-6 @$\0 = 0!23! Therefore
@ = 5× 0!23@ = 1!15 m/ s
778
PROBLEM 9.46
Situation: Flow over a at plate —additional details are provided in the problemstatement.
Find: Oil velocity 1 m from leading edge and 10 cm from surface.
APPROACH
Calculate Reynolds number and apply gure 9-6.
ANALYSIS
Reynolds numberRe$ = 1× 1$10"4 = 104
The boundary layer is laminar. Use Fig. 9-6 to obtain @$\0
?Re045$ $E = 0!10× 102$1 = 10
Therefore the point is outside the boundary layer so @ = \0 = 1 m/s.
779
PROBLEM 9.47
Situation: Water ows over a submerged at plate.Plate length is 2 = 0!7m and the width is . = 1!5m!Free stream velocity is \! = 1!5m$ s!
Find:(a) Thickness of boundary layer at the location where "=$ = 500' 000!(b) Distance from leading edge.where the Reynolds number reaches 500,000.(c) Local shear stress.at the location where "=$ = 500' 000!
Properties: Table A.5 (water at 10 !C): # = 1000 kg$m3' 7 = 1!31 × 10"3N · s$m2,: = 1!31× 10"6m2$ s!
APPROACH
Calculate Reynolds number. Next calculate boundary layer thickness and local shearstress.
ANALYSIS
Reynolds number
"=$ = 500' 000
500' 000 =\0E
:
E =500' 000:
\0
=500000× (1!31× 10"6m2$ s)
1!5m$ s
= 0!436 7m
b.) E = 0!437m
Boundary layer thickness correlation
i =5E
Re1*2$....Laminar ow
=5× 0!436 7m&500000
= 3!09× 10"3 m
a.) i = 3!09 mm
Local shear stress correlation
B 0 = 0!3327(\0$E)Re1*2$
= 0!332× 1!31× 10"3(1!5$0!4367)× (500' 000)1*2
c.) B 0 = 1!06 N/m2
780
PROBLEM 9.48
Situation: Water ows over a submerged at plate.Plate length is 2 = 0!7m and the width is . = 1!5m!Free stream velocity is \! = 1!5m$ s!
Find: (a) Shear resistance (drag force) for the portion of the plate that is exposed tolaminar boundary layer ow.(b) Ratio of laminar shearing force to total shearing force.
Properties: Table A.5 (water at 10 !C): # = 1000 kg$m3' 7 = 1!31 × 10"3N · s$m2,: = 1!31× 10"6m2$ s!
ANALYSIS
For the part of the plate exposed to laminar boundary layer ow, the average shearstress coe"cient (-() is
-( =1!33&ReE
(laminar BL ow)
=1!33
&500000
= 0!00188
Transition occurs when Reynolds number is 500,000.
500000 =\!Etransition
:
500000 =(1!5m$ s)× (Etransition)1!31× 10"6m2$ s
Solving for the transition location gives
Etransition = 0!436 7m
Surface resistance (drag force) for the part of the plate exposed to laminar boundarylayer is
H& = -(#\2!2I
= 0!00188
Ã1000 kg$m3 × (1!5m$ s)2
2
!(0!436 7m× 1!5m)
= 1! 385N
Reynolds number for the plate
ReE = \0 × 2$:= 1× 0!7$(1!31× 10"6)= 8!015× 105
781
Thus, the boundary layer is mixed. The average shear stress coe"cient (-() is
-( =0!523
ln2 (0!06ReE)"1520
ReE(mixed BL ow)
=0!523
ln2 (0!06× 8!015× 105)"
1520
8!015× 105= 0!00260
Surface resistance (drag force) for the whole plate is
H&total = -(
µ#\202
¶I
= 0!00260
Ã1000 kg$m3 × (1!5m$ s)2
2
!(0!7m× 1!5m)
= 3! 071N
The ratio of drag forces is
H& (laminar ow)H& (total)
=1! 385N
3! 071N= 0!451 0
H&lam .$H&total = 0!451
782
PROBLEM 9.49
Situation: Flow over an airplane wing is described in the problem statement.
Properties: From Table A.3 : = 1!6× 10"5 m3$s and # = 1!17 kg/m3.
Find: (a) Friction drag on wing.(b) Power to overcome friction drag.(c) Fraction of chord which is laminar ow.(d) Change in drag if boundary tripped at leading edge.
APPROACH
(a) Calculate friction drag.(b) Find power as the product of drag force and speed: * = H&,(c) Calculate the critical length at a Reynolds number of Re = 5× 105.(d) Compare the average shear stress coe"cients for a mixed boundary layer andall-turbulent boundary layer.
ANALYSIS
\0 = (200 km/hr)(1,000 m/km)/(3,600 s/hr)
\0 = 55!56 m/s
Reynolds number
Re = \02$:
= (55!56)(2)$(1!6× 10"5)= 6!9× 106
From Fig. 9.14, the ow is mixed laminar and turbulent
Surface resistance (drag force)
H& = -(D2#\20$2
-( =0!523
ln2(0!06Re)"1520
Re
= 0!00290
Wing has two surfaces so
H&Iwing = 2× -(D2#\20$2= (2)(0!00290)(11)(1!17)(55!56)2
H&Iwing = 230 N (a)
783
Power
* = Hs,wing\0
= 230× 55!56* = 12!78 kW (b)
Critical laminar Re = 5× 105 = \0E$:
E1K = 5× 105:$\0= (5× 105)(1!6× 10"5)$55!56
E1K = 14 cm
b3CZ! = E1K$2
= !14$2
b3CZ = !07 (c)
If all of boundary layer is turbulent then
-( = 0!074$Re042
-( = 0!00317
Then
Htripped B.L.$Hnormal = 0!00317$0!00290
= 1!093
Change in drag with tripped B.L. is 9!3N increase.
784
PROBLEM 9.50
Situation: Turbulent ow over a at plate —additional details are provided in theproblem statement.
Properties: From Table A.5 # = 998 kg/m3; : = 10"6 m2$s.
Find: Velocity 1 cm above plate surface.
ANALYSIS
Local shear stress
@& = (B 0$#)045 = (0!1$998)045 = 0!01 m/s
@&?$: = (0!01)(0!01)$(10"6) = 102
From Fig. 9-10 for @&?$: = 100 it is seen that Eq. 9-34 applies
@$@& = 5!57 log(?@&$:) + 5!56
= 5!75 log(100) + 5!56 = 17!06
@ = @&(17!06) = 0!01(17!06)
@ = 0!171 m/s
785
PROBLEM 9.51
Situation: Flow over a at plate —additional details are provided in the problemstatement.
Find: (a) Resistance of plate.(b) Boundary layer thickness at trailing edge.
ANALYSIS
Reynolds number
ReE = \02$:
= 0!15× 1!5$(10"6)= 2! 25× 105
ReE ' 500,000; therefore, laminar boundary layer
Boundary layer thickness
i = 5E$Re1*2$= 5× 1!5$(2! 25× 105)1*2 = 1! 581 1× 10"2 m
i = 15!8 mm
Average shear stress coe"cient
-( = 1!33$Re1*2E
= 1!33$(2! 25× 105)1*2
= 0!00280
Surface resistance (drag force)
H& = -(I#\20$2
= 0!00280× 1!0× 1!5× 2× 1000× 0!152$2
H& = 0!094 5 N
786
PROBLEM 9.52
Situation: Flow over a at plate —additional details are provided in the problemstatement.
Find: (a) Skin friction drag per unit width of plate.(b) Velocity gradient at surface 1 m downstream from leading edge.
ANALYSIS
Reynolds number
ReE = \02#$7
= 20× 2× 1!5$10"5
= 6× 106
Average shear stress coe"cient
-( =0!523
ln2(0!06Re)"1520
Re
= 0!00294
Surface resistance (drag force)
H& = -((2D2)#\20$2
= 0!00294× (2× 1× 2)(1!5× 202$2)H& = 3!53 N
Reynolds number
Re1" = 6× 106 × (1$2)= 3× 106
Local shear stress coe"cient
Z( = 0!455$ ln2(0!06Re1")
= 0!455$ ln2(0!06× 3× 106)= 0!0031
Local shear stress
B 0 = Z(#\20$2
= 0!0031× 1!5× 202$2= 0!93 N/m2
B 0 = 7A@$A?
or
A@$A? = B 0$7
= 0!93$10"5
A@$A? = 9!3× 104 s"1
787
PROBLEM 9.53
Situation: Start with equation 9.44
Find: Carry out the steps leading to equation 4.47
ANALYSIS
Equation 9.44 is
B 0#=7
72\20Ai
AE
Substituting in Eq. 9.46 gives
0!010\20
µ:
\0i
¶1*6=7
72\20Ai
AE
Cancelling the \0’s and rearranging gives
72
7× 0!010
µ:
\0
¶1*6= i1*6
Ai
AE
Separate variables
0!1028
µ:
\0
¶1*6AE = i1*6Ai
Integrate
6
7i7*6 = 0!1028
µ:
\0
¶1*6E+ -
But i(0) = 0 so the constant is zero. Solving for i gives
i = (7
6× 0!1028)6*7
µ:
\0
¶1*7E6*7
Dividing through by E results in
^$= 0416
Re1.7'
788
PROBLEM 9.54
Situation: Flow over an airplane wing is described in the problem statement.
Find: (a) Speed at which turbulent boundary layer appears.(b) Total drag at this speed.
ANALYSIS
Reynolds number
Returb = 5× 105
=\Z
:
\ =(5× 105);
Z
=(5× 105)(1!58× 10"4)
5$12
= 189! 6 ft$ s
\ = 190 ft/s
Average shear stress coe"cient
-( = 1!33$(5× 105)045
= 0!00188
Surface resistance (drag force)
H& = -((#\2$2)I
= (0!00188)((0!00237)(189! 6)2$(2))(2)(3)(5$12)
H& = 0!200 lbf
789
PROBLEM 9.55
Situation: Flow over a at plate —additional details are provided in the problemstatement.
Find: (a) Skin friction drag on top per unit width.(b) Shear stress on plate at downstream end.
APPROACH
Apply the momentum principle to the c.v. shown. Then calculate the local shearstress.
ANALYSIS
c.s.
.
shear stress
y
Momentum principle
XH$ =
Z
c.v.,$#V · AA
H&Iplate on c.v. = "#, 21 i +Z#, 22 AI+ #,1^top
where
,2 = (,max$i)? = ,1?$i
^top = ,1i "Z ^
0
,2A? = ,1i "Z ^
0
,1?$iA?
^top = ,1i " ,1?2$2i|^0 = ,1i " 0!5,1i = 0!5,1i
Then
H& = "#, 21 i +Z ^
0
#(,1?$i)2A? + 0!5#, 21 i
= "#, 21 i + #,21 i$3 + 0!5#,
21 i
= #, 21 i("1 + (1$3) + (1$2)) = "0!1667#,21 i
For ,1 = 40 m/s, # = 1!2 kg/m3' and i = 3× 10"3 m we have
H& = "0!1667× 1!2× 402 × 3× 10"3
= "0!9608
790
or the skin friction drag on top side of plate is H& = +0!960 N.Local shear stress
B 0 = 7A,$A?
= 1!8× 10"5 × 40$(3× 10"3)
B 0 = 0!24 N/m2
791
PROBLEM 9.56
Situation: Start with Eq. 9.43
Find: Perform the integration and simplify to obtain Eq. 9.44.
ANALYSIS
Equation 9.43 is
B 0#= \20
A
AE
Z ^
0
³?i
´1*7 ·1"
³?i
´1*7¸A?
Changing the variable of integration to
g =³?i
´
the integral becomes
Z ^
0
³?i
´1*7 ·1"
³?i
´1*7¸A? = i
Z 1
0
g1*7£1" g1*7
¤Ag
= i
Z 1
0
[g1*7 " g2*7]Ag
Integrating we have
i
Z 1
0
[g1*7 " g2*7]Ag = i[7
8g8*7 "
7
9g9*7]10 =
7
72i
The equation then becomes
B 0#=7
72\20Ai
AE
792
PROBLEM 9.57
Situation: The velocity prole in a boundary layer is replaced by a step prole—additional details are provided in the problem statement.
Find: Derive an equation for displacement thickness.
ANALYSIS
/ =
Z ^
0
#@A? =
Z ^
^##'\'A? = #'\'(i " i
&)
#'\'i& = #'\'i "
Z ^
0
#@A?
= #'\'
Z ^
0
(1" (#@)$#'\')A?
! i& =Z ^
0
(1" (#@)$(#'\'))A?
793
PROBLEM 9.58
Situation: Displacement thickness is described in the problem statement.
Find: Magnitude of displacement thickness.
ANALYSIS
The streamlines will be displaced a distance i& = ^defect$,1 where
^defect =
Z ^
0
(,1 " ,2)A? =Z ^
0
(,1 " ,1?$i)A?
Then
i& = [
Z ^
0
(,1 " ,1?$i)A?]$,1
=
Z ^
0
(1" ?$i)A?
= i " i$2= i$2
i& = 1!5 mm
794
PROBLEM 9.59
Situation: Relationship between shear stress and boundary layer thickness:
B 0#= !0225\20 (
:
\0i)1*4
Find: (a) The variation of boundary layer thickness with E and Re$.(b) The variation of Local shear stress coe"cient with Re$.(c) The variation of average shear stress coe"cient with ReE.
APPROACH
Apply the integral method represented by Eq. 9.44 and the relationship betweenshear stress and boundary layer thickness (above).
ANALYSIS
Evaluating the integral for the 1/7th power prole gives
B 0#=7
72\20Ai
AE
Substituting in the expression for shear stress gives
0!0225:1*4
\1*40
=7
72i1*4
Ai
AE
Integrating and using the initial condition at i(0) = 0 gives
^$= 0437
Re1.5'
Substituting the equation for i into the equation for shear stress gives
Z( =04058
Re1.5'
Integrating this over a plate for the average shear stress coe"cient gives
-( =1
2
Z E
0
Z(AE
-( =04072
Re1.53
795
PROBLEM 9.60
Situation: Flow over two at plates —additional details are provided in the problemstatement.
Find: Ratio of skin friction drag on two plates.
ANALYSIS
Surface resistance (drag force)
H& = -(D2#\20$2
where -( = 04523ln2(0406×Re3)
" 1520Re3
Reynolds number
ReEI30 = 30× 10$10"6 = 3× 108
ReEI10 = 108
Then
-(I30 = 0!00187
-(I10 = 0!00213
Then
H&I30$H&I10 = (0!00187$0!00213)× 3
H&I30$H&I10 = 2!59
796
PROBLEM 9.61
Situation: A sign being pulled through air is described in the problem statement.
Properties: From Table A.3 : = 1!41× 10"5 m2$s and # = 1!25 kg/m3!
Find: Power required to pull sign.
APPROACH
Find the average shear stress coe"cient (-() and then calculate the surface resistance(drag force). Find power using the product of speed and drag force (* = H&, ).
ANALYSIS
Reynolds number
ReE =,02
:
=35× 30
1!41× 10"5ReE = 7! 447× 107
Average shear stress coe"cient (Eq. 9.54 or Fig. 9.14)
-( =0!523
ln2 (0!06ReE)"1520
ReE(turbulent ow)
=0!523
ln2 (0!06× 7! 447× 107)"
1520
7! 447× 107= 0!00221
Surface resistance (drag force)
H& = -(I#\20$2
H& = 0!00221× 2× 30× 2× 1!25× 352$2= 203!0 N
* = H&, = 203!0× 35* = 7!11 kW
797
PROBLEM 9.62
Situation: A plastic panel being lowered in the ocean.Panel dimensions are 2 = 1m, . = 3m, and P = 0!003m!Other data is provided in the problem statement.
Find: Tension in cable.
APPROACH
Apply equilibrium to the panel. Apply the surface resistance equation and thebuoyancy force equation to calculate the unknown forces.
ANALYSIS
EquilibriumX
H; = 0
& + H& = HBuoy. ". = 0
& =. " H& " HBuoy. (1)
T
Fs
W
F .Buoy
Buoyancy force
HBuoy. = (water,"= 0!003× 3× 10' 070= 90!6 N
Surface resistance (drag force)
H& = -(I#\20$2
Reynolds number
"G3 = , 2$:
= 2× 1$(1!4× 10"6)= 1! 429× 106
From Fig. 9-14 or Eq. 9.54,-( = 0!00299
798
So
H& = 0!00299× 2× 3× 1026× 9$2= 82!83 N
Eq. (1) gives
& = 250" 82!83" 90!6& = 76!6 N
799
PROBLEM 9.63
Situation: A plate falling though water is described in the problem statement.
Find: Falling speed in fresh water.
APPROACH
Apply equilibrium with the weight, buoyancy and drag force.
ANALYSIS
Equilibrium. "D = H&
. " (water," =1
2-(I#\
20
23!5" 998× 9!81× 0!002 =1
2× 1000× 2× 2× -( × \20
or
\20 =0!001962
-(
Using the equation for the average resistance coe"cient (-( ) and solving gives
\0 = 0!805 m/s
800
PROBLEM 9.64
Situation: Flow over a at plate —additional details are provided in the problemstatement.
Properties: From Table A.5 : = 10"6 m2/s.
Find: (a) Thickness of viscous sublayer 1 m downstream from leading edge.(b) Would a roughness element 100 7m high a!ect the local skin friction coe"cient,if so why?
ANALYSIS
i0 = 5:$@&
where @& = (B 0$#)045 andLocal shear stress
B 0 = Z(#\20$2
B 0$# = [0!455$ ln2(0!06Re$)]\20$2
Reynolds number
Re$ = \0E$:
= (5)(1)$10"6
= 5× 106
Then
B 0$# = [0!455$ ln2(0!06× 5× 106)](25$2)B 0$# = 0!0357 m2$s2
@& = (B 0$#)045 = 0!189 m/s
Finallyi0 = 5:$@& = (5)(10
"6)$(0!189)
i0 = 26!4× 10"6 m
Roughness element size of 100 microns is about 4 times greater than the thickness ofthe viscous sublayer; therefore, it would denitely a!ect the skin friction coe"cient.
801
PROBLEM 9.65
Situation: A model plane falling though air is described in the problem statement.
Properties: From Table A.3 # = 1!2 kg/m3; : = 1!51× 10"5 m2$s.
Find: Falling speed.
APPROACH
Determine the drag force (surface resistance) and apply equilibrium.
ANALYSIS
Surface resistance (drag force)
H& = -(#(\20$2)I
-( = 0!074$Re042
Equilibrium
. . = H&
3 = 2(0!074$(\0 × 0!1$(1!51× 10"5))042)(1!2)(\20$2)(1× 0!1)
Solving for \0 yields \0 = 67!6 m/s.
802
PROBLEM 9.66
Situation: Flow over a at plate —additional details are provided in the problemstatement.
Find: Total drag force on plate.
ANALYSIS
The drag force (due to shear stress) is
H& = -(1
2#\2!D2
The density and kinematic viscosity of air at 20oC and atmospheric pressure is 1.2kg/m3 and 1.5×10"5 N·s/m2' respectively. The Reynolds number based on the platelength is
ReE =15× 1
1!5× 10"5= 106
The average shear stress coe"cient on the “tripped” side of the plate is
-( =0!074
(106)1*5= 0!0047
The average shear stress coe"cient on the “untripped” side is
-( =0!523
ln2(0!06× 106)"1520
106= 0!0028
The total force is
H& =1
2× 1!2× 152 × 1× 0!5× (0!0047 + 0!0028)
H& = 0!506 N
803
PROBLEM 9.67
Situation: Flow Through two at plates is described in the problem statement.
Find: (a) Length where boundary layers merge.(b) Shearing force per unit depth.
Properties: The density and kinematic viscosity of water at these conditions are 1000kg/m3 and 10"6 m2/s.
APPROACH
Apply the correlation for boundary layer thickness for a tripped leading edge.
ANALYSIS
Boundary layer thickness
i =0!37E
Re1*5$(boundary layer tripped at leading edge)
=0!37E4*5¡U!+
¢1*5
Setting i = 0!002 m and E = 2 gives
24*5 =0!002
0!37
µ10
10"6
¶1*5= 0!136
or
2 = 0!0826 m
Check the Reynolds number
Re$ =0!0826× 1010"6
= 8!26× 105
so the equations for the tripped boundary layer (Re$ G 107) are valid.
Average shear stress coe"cient
-( =0!074
¡040826×1010"6
¢1*5
= 0!00485
Surface resistance (drag force).
804
H&D
= 2×1
2#\2!-(2
= 998× 102 × 0!00485× 0!0826Z->= 40!0 N/m
805
PROBLEM 9.68
Situation: Develop a computer program with input of Reynolds number and natureof boundary layer.
Find: Boundary layer thickness, Local shear stress coe"cient, and average shearstress coe"cient.
ANALYSIS
Typical results from program.Normal boundary layer
Reynolds number i$E Z( -(5× 105 0!00707 0!000939 0!0018811!0× 106 0!0222 0!00376 0!0028011!0× 107 0!01599 0!00257 0!002803
Tripped boundary layer
Reynolds number i$E Z( -(1!0× 106 0!0233 0!!336 !0046691!0× 108 0!0115 0!00186 0!00213
806
PROBLEM 9.69
Situation: A boat planes in water at a temperature of 60 !F . Boat speed is \0 = 70mph = 102!7 ft$ s!Model the boat hull as a at plate with length 2 = 8 ft and width . = 3 ft!
Find: Power required to overcome skin friction drag.
Properties: From Table A.5 : = 1!22× 10"5 ft2$s and # = 1!94 slug$ ft3!
APPROACH
Power is the product of drag force and speed (* = H&\0) ! Find the drag force usingthe appropriate correlation.
ANALYSIS
Reynolds number
ReE =\02
:
=(102!7 ft$ s) (8 ft)
1!22× 10"5 ft2$ s)
= 6!73× 107
Thus, the boundary layer is mixed. From Fig. 9-14 or Eq. 9.54 -( = 0!00224!
Surface resistance (drag force)
H& = -(
µ#\202
¶I
= 0!00224
á1!94 slug$ ft3
¢(102!7 ft$ s)2
2
!(8 ft× 3 ft)
= 549!4 lbf.
Power
* = H&\0
= (549!4 lbf) (102!7 ft$ s)
= 56' 420ft-lbfs
=
µ56' 420
ft-lbfs
¶µs · hp
550 ft · lbf
¶
* = 103 hp
807
PROBLEM 9.70
Situation: A javelin moving through air is described in the problem statement.
Find: (a) Deceleration.(b) Drag.(c) Acceleration in head and tail wind .(d) Maximum distance.
Properties: From Table A.3 : = 1!51× 10"5 m2$s and # = 1!20 kg/m3.
Assumptions: Turbulent boundary layer where I& = 012 = 0×0!025×2!65 = 0!208m2;
ANALYSIS
Surface resistance
H& = -(I&#\20$2
Reynolds number
ReE = \02$: = 30× 2!65$(1!51× 10"5)= 5!3× 106
Then from Fig. 9-14, -( = 0!00297! Then
H& = 0!00297× 0!208× 1!2× 302$2= 0!334 N
H = /C
or
C = H$/ = 0!334$(8!0$9!81)
C = 0!410 m/s2
With tailwind or headwind -( will still be about the same value: -( ! 0!00297! Then
H&Iheadwind = 0!334× (35$30)2
H&Iheadwind = 0!455 N
H&Itailwind = 0!334× (25$30)2
H&Itailwind = 0!232 N
As a rst approximation for maximum distance, assume no drag or lift. So formaximum distance, the original line of ight (from release point) will be at 45! withthe horizontal—this is obtained from basic mechanics. Also, from basic mechanics:
? = ")P2$2 + ,0P sin K
808
andE = ,0P cos K
or upon eliminating P from the above with ? = 0, we get
E = 2, 20 sin K cos K$)
= 2× 322 × 0!7072$9!81E = 104!4 m
ThenP = E$,0 cos K = 104!4$(32× 0!707) = 4!61 s
Then the total change in velocity over 4!6 s! 4!6× C& = 4!6× ("0!41) = "1!89 m/sand the average velocity is , = (32 + 30!1)$2 = 31 m/s. Then, a better estimate ofdistance of throw is: E = 312$9!81 = 98!0 m
809
PROBLEM 9.71
Situation: A log is being pulled through water—additional details are provided in theproblem statement.
Find: Force required to overcome surface resistance.
Properties: From table A.5 : = 1!31× 10"6 m2/s.
ANALYSIS
Reynolds number
ReE = 1!7× 50$(1!31× 10"6)= 6!49× 107
From Fig. 9-14 -( = 0!00225Surface resistance
H& = -(I&#,20 $2
= 0!00225× 0 × 0!5× 50× 1' 000× 1!72$2H& = 255 N
810
PROBLEM 9.72
Situation: A passenger train moving through air is described in the problem state-ment.
Find: power required.
Properties: From Table A.3 : = 1!41× 10"5 m2$s.
ANALYSIS
Reynolds number
ReE = \02$: = (100' 000$3' 600)× 150$(1!41× 10"5)Re100 = 2!95× 108
Re200 = 5!9× 108
-(100 = 0!00187
-(200 = 0!00173
Surface resistance equation
H& = -(I#\20$2
H&100 = 0!00187× 10× 150× 1!25× (100' 000$3' 600)2$2
H&100 = 1' 353 N
H&200 = 5' 006 N
Power
*100 = 1' 353× (100' 000$3' 600)
*100 = 37!6 kW
*200 = 5' 006× (200' 000$3' 600)*200 = 278 kW
811
PROBLEM 9.73
Situation: A boundary layer next to the smooth hull of a ship is described in theproblem statement.
Find: (a) Thickness of boundary layer at E = 100 ft!(b) Velocity of water at ?$i = 0!5.(c) Shear stress on hull at E = 100 ft!
Properties: Table A.5 (water at 60 !F): # = 1!94 slug$ ft3 ' ( = 62!37 lbf$ ft3'
7 = 2!36× 10"5 lbf · s$ ft2, : = 1!22× 10"5 ft2$ s!
ANALYSIS
Reynolds number
Re$ =\E
:
=(45)(100)
1!22× 10"5= 3!689× 108
Local shear stress coe"cient
Z( =0!455
ln2(0!06Re$)=
0!455
ln2(0!06 # 3!689× 108)= 0!001591
Local shear stress
B 0 = Z(
µ#\202
¶
= (0!001591)
µ1!94× 452
2
¶
B 0 = 3!13 lbf/ft2 (c)
Shear velocity
@& = (B 0$#)045
= (3!13$1!94)045
= 1!270 ft/s
Boundary layer thickness (turbulent ow)
i$E = 0!16Re"1*7$ = 0!16¡3!689× 108
¢"1*7
= 0!009556
i = (0!009556)(100)
i = 0!956 ft (a)
i$2 = 0!48 ft
812
From Fig. 9-12 at ?$i = 0!50, (\0 " @)$@& ! 3 Then
(45" @)$1!27 = 3
@ (? = i$2) = 41!2 ft/s (b)
813
PROBLEM 9.74
Situation: A ship moving through water is described in the problem statement.
Find: Skin friction drag on ship.
Properties: From Table A.5 : = 1!41× 10"5 ft2$s and # = 1!94 slugs/ft3!
ANALYSIS
Reynolds number
ReE = \02$:
= (30)(600)$(1!41× 10"5)= 1!28× 109
From Fig. 9-14 -( = 0!00158!
Surface resistance equation.
H& = -(I&#\20$2
= (0!00158)(50' 000)(1!94)(30)2$2
H& = 68' 967 lbf
814
PROBLEM 9.75
Situation: A barge in a river is described in the problem statement.
Find: Shear (drag) force.
Properties: : = 1!2× 10"5 ft2$s and # = 1!94 slugs/ft3!
ANALYSIS
Reynolds number
ReE = , 2$:
= 10× 208$(1!2× 10"5)= 1!73× 108
From Fig. 9-14 -( = 0!00199.
Surface resistance (drag force)
H& = -(D2#,20 $2
= (0!00199)(44)(208)(1!94$2)(102)
H& = 1' 767 lbf
815
PROBLEM 9.76
Situation: A supertanker in open seas is described in the problem statement.
Find: (a) Skin friction drag.(b) Power required.(c) Boundary layer thickness 300 m from bow.
Properties: From Table A.4 : = 1!4× 10"6 m2$s and # = 1026 kg/m3!
APPROACH
Find Reynolds number, and then calculate the average shear stress coe"cient (-().Next, nd the drag force and calculate power as the product of drag force and speed(* = H& × , ) ! To nd boundary layer thickness, apply the correlation for a turbulentboundary layer.
ANALYSIS
Reynolds number
ReE =\02
:
=(18× 0!515)× 325
1!4× 10"6= 2! 152× 109
Average shear stress coe"cient (-() (from Eq.9.54 or Fig. 9.14)
-( =0!523
ln2 (0!06ReE)"1520
ReE(turbulent ow)
=0!523
ln2 (0!06× 2! 152× 109)"
1520
2! 152× 109= 0!001499
Surface resistance (drag force)
H& = -(I#\20$2
= 0!001499× 325(48 + 38)× 1026× (18× 0!515)2$2= 1! 847× 106N
H& = 1!85 MN
Power
* = 1! 847× 106 × (18× 0!515)
* = 17!1 MW
816
Reynolds number
Re300 =\0E
:
=18× 0!515× 3001!4× 10"6
= 1! 986× 109
Thus, turbulent boundary layer
Correlation for boundary layer thickness (turbulent ow)
i
E=
0!16
Re1*7$
=0!16
(1! 986× 109)1*7
= 7! 513× 10"3
i = 300m× !007513i = 2!25 m
817
PROBLEM 9.77
Situation: A model test is to be done to predict the drag on a ship—additional detailsare provided in the problem statement.
Find: Wave drag on actual ship.
Properties: From Table A.5 : = 1!22× 10"5 ft2$s and # = 1!94 slugs/ft3!
ANALYSIS
Equilibrium
H3" = H3,
2"$2, = 1$100
,"$()2")045 = ,,$()2,)
045
,"$,, = (2"$2,)045 = 1$10
, 2"$,2, = 1$100
," = (1$10)(30 ft/s) = 3 ft/s
Viscous drag on model:
ReE = , 2$:
= (3)(5)$(1!22× 10"5)= 1!23× 106
-( = 0!00293 from Fig. 9-14
Surface resistance (drag force)
H&I" = -((1$2)#,2I
= (0!00293)(1$2)(1!94)(32)(2!5)
= 0!0639 lbf
! Hwave,m = 0!1" 0!0639 = 0!0361 lbf
Assume, for scaling up wave drag, that
(-,)" = (-,),
(!%$(#, 2$2))" = (!%$(#, 2$2)),
!%"$!%, = (#"$#,)(,2"$,
2, )
But
H"$H, = (!%"$!%,)(I"$I,) = (#"$#,)(,2"$,
2, )(I"$I,)
= (#"$#,)(2"$2,)3 = (1!94$1!99)(1$100)3
H, = H"(1!99$1!94)(100)3 = 0!0361(1!99$1!94)(106)
H, = 3!70× 104 lbf
818
PROBLEM 9.78
Situation: A model test is done to predict the drag on a ship—additional details areprovided in the problem statement.
Find: (a) Speed of prototype.(b) Model skin friction and wave drag.(c) Ship drag in salt water.
Properties: From Table A.5 :" = 1!00× 10"6 m2/s and #" = 998 kg/m3!From Table A.4 :, = 1!4× 10"6 m2$s and #" = 1026 kg/m3!
ANALYSIS
," = 1!45 m/s
,, = (2,$2")1*2 × ,"
=&30× 1!45," = 7!94 m/s
Re" = 1!45(250$30)$(1!00× 10"6) = 1!2× 107
Re, = 7!94× 250$1!4× 10"6 = 1!42× 109
-( =0!523
ln2(0!06Re)"1520
Re
-(" = 0!00275
-(, = 0!00157
Surface resistance (drag force)
H&" = -("I#,2$2
= 0!00275(8' 800$302)998× 1!452$2
H&" = 28!21 N
Hwave1 = 38!00" 28!21Hwave1 = 9!79 N
Hwave/ = (#,$#")(2,$2")3Hwave1 = (1' 026$998)30
3(9!79) = 272 kN
H&, = -(/I#,2$2 = 0!00157(8' 800)1' 026× 7!942$2 = 447 kN
H, = Hwave/ + H&, = 272 + 447
H, = 719 kN
819
PROBLEM 9.79
Situation: A hydroplane skims across a lake—additional details are provided in theproblem statement.
Find: Minimum shear stress on smooth bottom.
APPROACH
Minimum B 0 occurs where Z( is minimum. Two points to check: (1) where Re$ ishighest; i.e., Re$ = ReE and (2) Transition point at Re$ = 5× 105 (this is the end ofthe laminar boundary layer).
ANALYSIS
(1) Check end of plate
ReE = \02$:
= 15× 3$10"6
= 4!5× 107
Z( !0!455
ln2(0!06Re$)= 0!00207
(2) Check transitionRe$ = 5× 105
Z( = 0!664$Re1*2$= 0!00094
Local shear stress
B 0m in = Z(min#\20$2
= 0!00094× 998× 152$2
B 0min = 106 N/m2
820
PROBLEM 9.80
Situation: A water skier is described in the problem statement.
Find: Power to overcome surface resistance.
Properties: From Table A.5 : = 1!2× 10"5 ft2$s and # = 1!94 slugs/ft3.
ANALYSIS
Reynolds number
ReE = , 2$:
= 44× 4$1!2× 10"5
= 147(105) = 1!47(107)
From Fig. 9.14 -( = 0!0027!
Surface resistance (drag force)
H9 (per ski) = 0!0027(4)(1$2)(1!94)(442$2) = 10!14 lbf
H9 (2 skis) = 20!28 lbf
Power
* (hp) = 20!28× 44$550
* = 1!62 hp
821
PROBLEM 9.81
Situation: A ship is described in the problem statement.
Find: (a) Surface drag.(b) Thickness of boundary layer at stern.
Properties: From Table A.4 : = 1!4× 10"6 m2$s.
APPROACH
Apply the surface resistance equation by rst nding Reynolds number and-( . Thenapply the correlation for boundary layer thickness.
ANALYSIS
Reynolds number
ReE = \02$: = 10× 80$(1!4× 10"6)ReE = 5!7× 108
From Fig. 9-14 -( = 0!00173!
Surface resistance
H9 = -(I#\20$2
= 0!00173× 1' 500× 1' 026× 102$2
H9 = 133 kN
Boundary layer thickness
i$E =0!16
Re1*7$i$E = 0!0090
i = 80× 0!0090i = 0!72 m
822
PROBLEM 10.1
Situation: Mean-velocity proles are described in the problem statement.
Find: Match the proles with the descriptions.
ANALYSIS
a. (3) b. (1) c. (2) d.(1) e. (3) f. (2)
823
PROBLEM 10.2
Situation: Liquid ows in a vertical pipe–details are provided in the problem state-ment
Find: (a) Determine the direction of ow.(b) Calculate the mean uid velocity in pipe.
ANALYSIS
Energy equation
%0$( + T!,20 $2) + R0 = %10$( + T10,
210$2) + R10 + ME
To evaluate, note that T!, 20 $2) = T10,210$2)! Substituting values gives
200' 000$8000 + 0 = 110' 000$8000 + 10 + M(
M( = 1!25m
Because ME is positive, the ow must be upward.
Head loss (laminar ow)
M( =3272,
(12
, =M((1
2
3272
=1!25× 8000× 0!012
32× (3!0× 10"3)× 10= 1!042m$ s
, = 1!04m$ s
824
PROBLEM 10.3
Situation: A viscous oil draining is described in the problem statement.
Find: Valid characterization at the time when the oil surface reaches level of section2.
ANALYSIS
Valid statements are (a), (d) and (e).
825
PROBLEM 10.4
Situation: Oil is pumped through a 2 in. pipe. ] = 0!25 cfs.
Find: Pressure drop per 100 feet of level pipe.
Properties: Oil Properties: 6 = 0!97' 7 = 10"2 lbf · s$ ft2
ANALYSIS
Flow rate equation
, = ]$I
= 0!05$((0$4)× (1$12)2)= 9!17 ft/sec
Reynolds number
Re = , 1#$7
= 9!17× (1$12)× 0!97× 1!94$10"2
= 144 (thus, ow is laminar)
Pressure Drop
!% =3272,
12
=32× 10"2 × 100× 9!17
(1$12)2
= 42' 255psf100 ft
= 293 psi/100 ft
826
PROBLEM 10.5
Situation: Liquid ows downward in a smooth vertical pipe. 1 = 1 cm , = 2!0m$ s%1 = 600 kPa
Find: Pressure at a section that is 10 feet below section 1.
Properties: # = 1000 kg$m3 7 = 0!06N · s$m2
ANALYSIS
Reynolds number
Re =, 1#
7
=2× 0!01× 1000
0!06= 333
Since Re G 2000, the ow is laminar.
Energy principle
%1$( + T1,21 $2) + R1 = %2$( + T1,
22 $2) + R2 + ME
Since ,1 = ,2, the velocity head terms (i.e. kinetic energy terms) cancel. The energyequation becomes
600' 000$(9!81× 1000) + 10 = %2$( + 0 + 3272,$(12
%2$( = 600' 000$( + 10" 32× 0!06× 10× 2$(((0!01)2)%2 = 600' 000 + 10× 9810" 384' 000
= 314 kPa
827
PROBLEM 10.6
Situation: A liquid ows in a pipe. 1 = 8mm' , = 1m$ s!
Find: (a) Determine if the velocity distribution will be logarithmic or parabolic. (b)Calculate the ratio of shear stress 1 mm from the wall to the shear stress at the wall..
Properties: # = 1000 kg$m3' 7 = 10"1 N · s$m2' : = 10"5m2$ s!
ANALYSIS
Reynolds number
Re =, 1#
7
=(1)(0!008)(1000)
10"1
= 80 (laminar)
Because the ow is laminar, the velocity distribution will be parabolic. For a par-abolic velocity distribution
, = ,1(1" 32$"2)
Velocity gradient
A,$A3 = "23,1$"2
Shear stress
B = 7A,
A3
Ratio of shear stress
B 3 mmB 4 mm
=
¡7A?AK
¢3 mm¡
7A?AK
¢4 mm
=" (723,1$"2)3 mm" (723,1$"2)4 mm
=(3)3 mm(3)4 mm
Therefore
B 3 mmB 4 mm
=3
4
= 0.75
828
PROBLEM 10.7
Situation: Glycerin ows in a tube–other details are provided in the problem state-ment.
Find: Pressure drop in units of pascals per 10 m.
Properties: Glycerin at 20 !C from Table A.4: 7 = 1!41N · s$m2, : = 1!12 ×10"3m2$ s!
ANALYSIS
, =]
I
=8× 10"6
(0$4)× 0!0302
= 0!01132 m/s
Reynolds number
Re =, 1
:
=0!01132× 0!0301!12× 10"3
= 0!3032 (laminar)
Then
!%( =3272,
12
=32× 1!41× 10× 0!01132
0!0302
= 5675Pa per 10m of pipe length
5.68 kPa per 10 m of pipe length
829
PROBLEM 10.8
Situation: Kerosene ows out a tank and through a tube–other details are providedin the problem statement.
Find: (a) Mean velocity in the tube.(b) Discharge.
Assumptions: Laminar ow so T = 2!
APPROACH
Apply the energy equation from the surface of the reservoir to the pipe outlet.
ANALYSIS
Energy equation
%1$( + T1,21 $2) + R1 = %2$( + 2,
2$2) + R2 + 3272,$((12)
0 + 0 + 0!50 = 0 + , 2$) + 3272,$((12)
Thus
, 2$) + 3272,$((12)" 0!50 = 0
, 2$32!2 + 32(4× 10"5)(10),$(0!80× 62!4× (1$48)2)" 0!50 = 0
, 2 + 19!0, " 16!1 = 0
Solving the above quadratic equation for , yields:
, = 0!81 ft/s
Check Reynolds number to see if ow is laminar
Re = , 1#$7
= 0!81× (1$48)(1!94× 0!8)$(4× 10"5)Re = 654!8 (laminar)
] = , I
= 0!81× (0$4)(1$48)2
= 2!76× 10"4 cfs
830
PROBLEM 10.9
Situation: Oil is pumped through a horizontal pipe–other details are provided in theproblem statement.
Find: Pressure drop per 10 m of pipe.
ANALYSIS
Re = , 1#$7
= 0!7× 0!05× 940$0!048= 685
Energy equation
%1$( + T1,21 $2) + R1 = %2$( + T2,
22 $2) + R2 + 3272,$(1
2
Simplify
%1 " %2 = 3272,$12
= 32× 0!048× 10× 0!7$(0!05)2
%1 " %2 = 4301Pa
%1 " %2 = 4!30 kPa
831
PROBLEM 10.10
Situation: SAE 10-W oil is pumped through a tube–other details are provided inthe problem statement
Find: Power to operate the pump.
ANALYSIS
Energy equation
%1$( + R1 + T1,21 $2) + M, = %2$( + T2,
22 $2) + R2 + ME
SimplifyM, = ME = b(2$1)(,
2$2))
Flow rate equation
, = ]$I = 7!85× 10"4$((0$4)(0!01)2) = 10 m/s
Reynolds number
Re = , 1$: = (10)(0!01)$(7!6× 10"5) = 1316 (laminar)
Friction factor (b)
b =64
Re
=64
1316= 0!0486
Head of the pump
M, = b(2$1)(, 2$2))
= 0!0486(8$0!01)(102$((2)(9!81))
= 198 m
Power equation
* = M,(]
= 198× 8630ס7!85 · 10"4
¢
= 1341W
832
PROBLEM 10.11
Situation: Oil ows downward in a pipe–other details are provided in the problemstatement
Find: Pressure gradient along the pipe.
ANALYSIS
Re = , 1$:
= (2)(0!10)$(0!0057)
= 35!1 (laminar)
"A$A9(%+ (R) = 327,$12
"A%$A9" (AR$A9 = (32)(10"2)(2)$0!12
"A%$A9" (("0!5) = 64
A%$A9 = (0!5)(0!9)(62!4)" 64A%$A9 = 28!08" 64
= -35.9 psf/ft
833
PROBLEM 10.12
Situation: Fluid ows in a smooth pipe–other details are provided in the problemstatement
Find: (a) Magnitude of maximum velocity, (b) Resistance coe"cient, (c) Shear ve-locity, and (d) Shear stress 25 mm from pipe center.
ANALYSIS
Reynolds number
Re =, 1#
7
=0!05× 0!1× 800
0!01= 400
Therefore, the ow is laminar
,max = 2, = 10 cm/s
b = 64$Re
= 64$400
= 0.16
@&$, =pb$8
@& =p0!16$8× 0!05
= 0.00707 m/s
B 0 = #@2&= 800× 0!007072
= 0!040 N/m2
Get B K=04025 by proportions:
0!025$0!05 = B$B 0; B = 0!50B 0
B = 0!50× 0!040= 0.020 N/m2
834
PROBLEM 10.13
Situation: Kerosene ows in a pipe.& = 20!C, ] = 0!02m3$9' 1 = 20 cm
Find: Determine if the ow is laminar or turbulent.
ANALYSIS
Re = , 1#$7
= (]$I)1$:
= 4]$(01:)
= 4× 0!04$(0 × 0!25× 2!37× 10"6)= 85' 957
Flow is turbulent
835
PROBLEM 10.14
Situation: Fluid ows out of a tank through a pipe that has a contraction in diameterfrom 2 to 1 m.Each pipe is 100 m long. Friction factor in each pipe is b = 0!01
Find: Ratio of head lossME (1-m pipe)ME (2-m pipe)
ANALYSIS
ME = b12111
, 212)
ME (1-m pipe)ME (2-m pipe)
=
µb121,
21 $ (11)
b222, 22 $ (12)
¶
= (12$11)(,21 $,
22 )
,1I1 = ,2I2
,1$,2 = I2$I1 = (12$11)2
(,1$,2)2 = (12$11)
4
Thus
ME (1-m pipe)ME (2-m pipe)
= (12$11)(12$11)4
= (12$11)5
= 25
= 32
Correct choice is (d).
836
PROBLEM 10.15
Situation: Glycerin ows in a pipe1 = 0!5 ft' & = 68!F, , = 2 ft$ s
Find: (a) Determine if the ow is laminar or turbulent. (b) Plot the velocity distrib-ution.
Properties: Glycerin at 68 !F from Table A.4: 7 = 0!03 lbf · s$ ft2, : = 1!22 ×10"2 ft2$ s!
ANALYSIS
Re =, 1
:
=2× 0!5
1!22× 10"2
= 81!97 (laminar)
To nd the velocity distribution, begin with Eq. (10.7)
, (3) =32! " 32
47
·"A
A9(%+ (R)
¸
From Eq. (10.10) ·"A
A9(%+ (R)
¸=87,
32!
Combine equations
, (3) =32! " 32
47
·87,
32!
¸
= 2,
µ1"
32
32!
¶
= (4 ft$ s)
Ã1"
µ3
3!
¶2!
Create a table of values and plot
3 (in) 3$30 , (3) (ft/s)0 0 40.5 1/6 3.891.0 1/3 3.561.5 1/2 3.002 2/3 2.222.5 5/6 1.223 1 0
837
Velocity (ft/s)
0 1 2 3 4 50
1
2
3
Rad
ius
(in)
838
PROBLEM 10.16
Situation: Glycerin (20!C) ows through a funnel–details are provided in the prob-lem statement.
Find: Mean velocity of glycerine.
Properties: Glycerin at 20 !C from Table A.4: # = 1260 kg$m3, ( = 12' 300N$m3,7 = 1!41N · s$m2, : = 1!12× 10"3m2$ s!
Assumptions: Assume laminar ow (T2 = 2!0) !
ANALYSIS
Energy equation (Let section 1 be the surface of the liquid and section 2 be the exitplane of the funnel).
%1(+ T1
, 212)+ R1 + M, =
%2(+ T2
, 222)+ R2 + M5 + ME
!
0 + 0 + 0!30 = 0 + 2!0
µ, 222)
¶+ 0 +
3272,2(12
0!30 = 2!0
µ, 22
2× 9!81
¶+
µ32× 1!41× 0!2× ,212300× 0!012
¶
Solve quadratic equation.
,2 = "72! 01,2 = ,2 = 4! 087× 10"2
Select the positive root
,2 = 0!0409 m/s
Check the laminar ow assumption
Re =, 1#
7
=0!0409× 0!01× 1260
1!41= 0!365
Since Re ' 2000, the laminar ow assumption is valid.
839
PROBLEM 10.17
Situation: Castor oil ows in a steel pipe.Flow rate is ] = 0!2 ft3$ s! Pipe length is 2 = 0!5mi = 2640 ft!Allowable pressure drop is 10 psi.
Find: Diameter of steel pipe.
Properties: Viscosity of castor oil is 7 = 8!5× 10"3 lbf-s/ft2!Specic gravity of castor oil is 6 = 0!85!
Assumptions: Assume laminar ow.
ANALYSIS
!%( =3272,
12
or
!%( =3272]
(0$4)×14
Then
14 =12872]
0!%(
=128× 8!5× 10"3 × 2640× 0!2
0 × 10× 14414 = 0!126 98
1 ) 0!5969 ft
Find velocity.
, =]
I
=0!2
0$4× 0!59692
= 0!7147 ft/sec.
Check Reynolds number
Re =, 1#
7
=0!7147× 0!5969× (0!85× 1!94)
8!5× 10"3= 82!76
Thus, the initial assumption of laminar ow is valid. Use a pipe with an insidediameter of
1 ) 0!597 ft
840
PROBLEM 10.18
Situation: Mercury ows downward through a long round tube. & = 20!CThe tube is oriented vertically and open at both ends.
Find: Largest tube diameter so that the ow is still laminar.
Properties: From Table A.4: 7 = 1!5 × 10"3 N·s/m2' : = 1!2 × 10"7 m2/s, ( =133' 000 N/m3
Assumptions: The tube is smooth.
ANALYSIS
Energy equation
%1$( + T1,21 $2) + R1 = %2$( + T2,
22 $2) + R2 + ME
Term by term analysis
%1 = %2; ,1 = ,2; T1 = T2; R1 " R2 = 2
The energy equation2 = ME (1)
Head loss (laminar ow)
ME = M( =3272,
(12(2)
Combining Eqs. (1) and (2)
ME(12
327,= ME
(12
327,= 1 (3)
Reynolds number
Re =, 1
:= 2000
, =2000:
1(4)
Combining Eqs. (3) and (4)(13
64' 0007:= 1
or
1 = 3
r64' 0007:
(
= 3
s(64' 000) (1!5× 10"3) (1!2× 10"7)
133' 000
= 4!43× 10"4m
841
PROBLEM 10.19
Situation: Glycerin ows in a steel tube—additional details are provided in the problemstatement
Find: (a) Determine if the ow is laminar or turbulent, (b) Will pressure increaseor decrease in direction of ow? (c) Calculate the rate of change of pressure in thedirection of ow, (d) Calculate shear stress at the center of the tube and (e) Calculateshear stress at the wall.
Properties: Glycerin at 20 !C from Table A.4: # = 1260 kg$m3, ( = 12' 300N$m3,7 = 1!41N · s$m2, : = 1!12× 10"3m2$ s!
ANALYSIS
Re =, 1
:
=0!40× 0!041!12× 10"3
= 14!29
Answer ==F Since " ' 2000, the ow is laminar.
From solution to Problem 10-11
AM
A9="327,(12
AM
A9=
"327,(12
="32× 1!41× 0!412300× 0!042
= "0!917 1
or
(1$()A%$A9+ AR$A9 = "0!917 1
Because ow is downward, AR$AR = "1! Then
A%$A9 = 12300[1" 0!917 1]= 1019! 7
= 1.02 kPa/m
Answer ! Pressure increases in the direction of ow (downward).
842
From Eq. 10-3B = ((3$2)["AM$A9]
or
B = 12' 300(3$2)× 0!917 1
At the center of the pipe (3 = 0)
B K=0=0
At the wall (3 = 2cm)
Bwall = B 0 = 12' 300(0!02$2)× 0!917 1
Bwall = 113N$m2
843
PROBLEM 10.20
Situation: The design might have a physical conguration as shown below. Thedesign should be based upon solving Eq. 10.17 (M( = 3272,$((12)) for the viscosity7. Since this is for laminar ow, the size of pipe and depth of liquid in the tank shouldbe such that laminar ow will be assured ("G G 1000). For the design suggested here,the following measurements, conditions, and calculations would have to be made:
Pump
A. Measure tube diameter by some means.B. Measure ( or measure temperature and get ( from a handbook.C. Establish steady ow by having a steady supply source (pump liquid from areservoir).D. Measure ]. This could be done by weighing an amount of ow for a givenperiod of time or by some other means.E. Measure M($2 by the slope of the piezometric head line as obtained frompiezometers. This could also be obtained by measuring!% along the tube by meansof pressure gages or pressure transducers from which M($2 could be calculated.F. Solve for 7 with Eq. 10.17.
844
PROBLEM 10.21
Situation: Velocity measurements are made in a 1-ft diameter pipe. Other detailsare provided in the problem statement.
Find: Kinematic viscosity of uid.
ANALYSIS
Since the velocity distribution is parabolic, the ow is laminar. Then
!%( = 3272,$12
: = 7$# = !%(12$(322, #)
: = 15× 12$(32× 100× 2$2× 0!9× 1!94)
= 0.00268 ft2/s
845
PROBLEM 10.22
Situation: Velocity measurements are made in a 30-cm diameter pipe. Other detailsare provided in the problem statement.
Find: Kinematic viscosity of uid.
ANALYSIS
Following the solution for Problem 10.21,
: = !%(12$(322, #)
= 1' 900× (0!3)2$(32× 100× 0!75× 800)
= 8!91× 10"5 m2/s
846
PROBLEM 10.23
Situation: Water is pumped through tubes in a heat exchanger–other details areprovided in the problem statement
Find: Pressure di!erence across heat exchanger
ANALYSIS
Reynolds number (based on temperature at the inlet)
Re20! =, 1
:=0!12× 0!005
10"6= 600
Since Re ' 2000' the ow is laminar. Thus,
!% = 3272,$12
Assume linear variation in 7 and use the temperature at 25!C. From Table A.5
7avg. = 725!
= 8!91× 10"4 N · s/m2
and
!% = 3272,$12
= 32× 8!91× 10"4 × 5× 0!12$(0!005)2
= 684 Pa
847
PROBLEM 10.24
Situation: Oil ows through a 2-in. diameter smooth pipe—details are provided in theproblem statement.
Find: (a) The direction of the ow.(b) Resistance coe"cient.(c) Nature of the ow (laminar or turbulent).(d) Viscosity of oil.
ANALYSIS
Based on the deection on the manometer, the static pressure within the rightside of the pipe is larger than the pressure on the left end. Thus, the ow isdownward (from right to left).
Energy principle%2(+ T2
, 222)+ R2 =
%1(+ T1
, 212)+ R1 + ME
Term by term analysisT1,1 = T2,2; R2 " R1 = 2 ft
Darcy Weisbach equationME = b(2$1),
2$(2))
Combine equations%2 " %1(oil
= ("2 ft) + b2
1
, 2
2)(1)
Manometer equation
%2 + (4 ft) (oil + (0!33 ft) (oil " (0!33 ft) (Hg " (2 ft) (oil = %1
Calculate values
%2 " %1(oil
= " (4 ft)" (0!33 ft) + (0!33 ft)(Hg(oil
+ (2 ft)
= " (2 ft) + (0!33 ft)µ6Hg6oil
" 1¶
= " (2 ft) + (0!33 ft)µ13!6
0!8" 1¶
%2 " %1(oil
= 3!28 ft (2)
848
Substitute Eq. (2) into (1)
(3!28 ft) = ("2 ft) + b2
1
, 2
2)or
b = 5!28
µ1
2
¶µ2)
, 2
¶
= 5!28
µ1$6
30
¶µ2× 32!252
¶
b = 0!076
Since the resistance coe"cient (b) is now known, use this value to nd viscosity.
Resistance coe"cient (b) (assume laminar ow)
b =64
Re
0!076 =647
#, 1or
7 =0!076#, 1
64
=0!076× (0!8× 1!94)× 5× (1$6)
64
= 0.00154 lbf · s/ ft2
Check laminar ow assumption
Re =, 1#
7
=5× (1$6)× (0!8× 1!94)
0!00154= 840
Answer ! Flow is laminar.
849
PROBLEM 10.25
Situation: Oil ows through a 5-cm. diameter smooth pipe—details are provided inthe problem statement.
Find: (a) Flow direction.(b) Resistance coe"cient.(c) Nature of ow (laminar or turbulent).(d) Viscosity of oil.
ANALYSIS
Based on the deection on the manometer, the piezometric head on the right sideof the pipe is larger than that on the left side. Since the velocity at 1 and 2 is thesame, the energy at location 2 is higher than the energy at location 1. Since the auid will move from a location of high energy to a location of low energy, the ow isdownward (from right to left).Energy principle
%2(+ T2
, 222)+ R2 =
%1(+ T1
, 212)+ R1 + ME
Assume T1,1 = T2,2! Let R2 " R1 = 1m! Also the head loss is given by the DarcyWeisbach equation: M( = b(2$1), 2$(2))! The energy principle becomes
%2 " %1(oil
= ("1m) + b2
1
, 2
2)(1)
Manometer equation
%2 + (2m) (oil + (0!1m) (oil " (0!1m) (Hg " (1m) (oil = %1
Algebra gives
%2 " %1(oil
= " (2m)" (0!1m) + (0!1m)(Hg(oil
+ (1m)
= " (1m) + (0!1m)µ6Hg6oil
" 1¶
= " (1m) + (0!1m)µ13!6
0!8" 1¶
%2 " %1(oil
= 0!6m (2)
850
Substituting Eq. (2) into (1) gives
(0!6m) = ("1m) + b2
1
, 2
2)or
b = 1!6
µ1
2
¶µ2)
, 2
¶
= 1!6
µ0!05
12
¶µ2× 9!811!22
¶
b = 0!0908
Since the resistance coe"cient is now known, this value can be used to nd viscosity.To perform this calculation, assume the ow is laminar, and apply Eq. (10.23).
b =64
Re
0!0908 =647
#, 1or
7 =0!0908#, 1
64
=0!0908× (0!8× 1000)× 1!2× 0!05
64
= 0.068 N · s/m2
Now, check Reynolds number to see if laminar ow assumption is valid
Re =, 1#
7
=1!2× 0!05× (0!8× 1000)
0!068= 706
Thus, ow is laminar.
851
PROBLEM 10.26
Situation: A liquid ows through a 3-cm diameter smooth pipe.The ow rate is doubled.Other details are provided in the problem statement.
Find: Determine if the head loss would double.
ANALYSIS
M(2
= 2
=b
1
µ, 2
2)
¶
=b
0!03
µ12
2× 9!81
¶
= 1!699b
Rearrange
1!699b = 2
b = 1!177
Assume laminar ow:b = 64$Re
or
Re = 64$1!177 = 54!4 (laminar)
Indeed, the ow is laminar and it will be laminar if the ow rate is doubled.
Answer ! The head loss varies linearly with , (and ]); therefore, the head losswill double when the ow rate is doubled.
852
PROBLEM 10.27
Situation: Oil ows in a 12-in. smooth tube–other details are provided in the prob-lem statement.
Find: Viscous shear stress on wall.
ANALYSIS
As shown in Eq. (10.21), the resistance coe"cient is dened by
B ! =b
4
µ#, 2
2
¶
So
B ! =0!017
4
µ(0!82× 1!94) 62
2
¶
= 0!122 lbf$ ft2
853
PROBLEM 10.28
Situation: Fluids (oil and a gas) ow through a 10-cm. smooth tube–other detailsare provided in the problem statement.
Find: Velocity ratio: (,max,oil$,max,gas)!
ANALYSIS
Reoil =, 1#
7
=(1)(0!1)(900)
10"1
= 900
Since ow at this Reynolds number is laminar, the centerline velocity is twice themean velocity, or
,max , oil = 2,
For the gas
Regas =, 1#
7
=(1!0)(0!1)(1)
10"5
= 104
This corresponds to turbulent ow–Thus,
,max , gas % 1!08,
Therefore
,max,oil,max,gas
%2
1!08F 1
So, case (a) is the correct answer.
854
PROBLEM 10.29
Situation: Water ows with a through a horizontal run of PVC pipeSpeed of water: , = 5 ft$ s! Length of the pipe: 2 = 100 ft!Pipe is a 2.5" schedule 40: V1 = 2!45 in! = 0!204 ft
Find: (a) Pressure drop in psi.(b) Head loss in feet.(c) Power in horsepower needed to overcome the head loss.
Properties: Water @ 50 !F from Table A.5: # = 1!94 slug$ ft3, ( = 62!4 lbf$ ft3,: = 14!1× 10"6 ft2$ s!
Assumptions: 1.) Assume c& = 0!2.) Assume T1 = T2, where subscripts 1 and 2 denote the inlet and exit of the pipe.
APPROACH
To establish laminar or turbulent ow, calculate the Reynolds number. Then ndthe appropriate friction factor (b) and apply the Darcy-Weisbach equation to ndthe head loss. Next, nd the pressure drop using the energy equation. Lastly, ndpower using * = /)M( !
ANALYSIS
Reynolds number
Re =, 1
:
=(5 ft$ s) (0!204 ft)¡14!1× 10"6 ft2$ s
¢
= 72' 400
Thus, ow is turbulent.
Friction factor (b) (Swamee-Jain correlation)
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
hlog10
³5474
72I400049
´i2
= 0!0191
Darcy-Weisbach equation
M( = b2
1
, 2
2)
= 0!0191
µ100 ft
0!204 ft
¶(5 ft$ s)2
2× 32!2 ft$ s2= 3!635 ft
855
M( = 3!64 ft (part b)
Energy equation
%1(+ T1
, 212)+ R1 + M, =
%2(+ T2
, 222)+ R2 + M5 + ME
Select a control volume surrounding the pipe. After analysis of each term, the energyequation simplies to
%1(
=%2(+ M(
or !% = (M(
=¡62!4 lbf$ ft3
¢(3!635 ft)
= 227 psf
= 227
µlbf
ft2
¶µft2
144 in2
¶
!% = 1!58 psi (part a)
Flow rate equation
/ = #I,
=¡1!94 slug$ ft3
¢Ã0 (0!204 ft)2
4
!(5 ft$ s)
= 0!317 slug$ s
Power equation
. = /)M(
= (0!317 slug$ s)¡32!2 ft$ s2
¢(3!635 ft)
µ1!0 hp
550 ft · lbf$ s
¶
= 0!06746 hp
Power to overcome head loss = 0!0675 hp (part c)
COMMENTS
1. The pressure drop for a 100 ft run of pipe (!% = 227 psf % 1!6 psi )could bedecreased by selecting a larger pipe diameter.
2. The power to overcome the frictional head loss is about 1/15 of a horsepower.
856
PROBLEM 10.30
Situation: Water ows with a through a horizontal run of PVC pipeSpeed of water: , = 2m$ s! Length of the pipe: 2 = 50m!Pipe is a 2.5" schedule 40: V1 = 2!45 in! = 0!0622m!
Find: (a) Pressure drop in kPa.(b) Head loss in meters.(c) Power in watts needed to overcome the head loss.
Properties: Water @ 10 !C from Table A.5: # = 1000 kg$m3, ( = 9810N$m3, : =1!31× 10"6m2$ s!
Assumptions: 1.) Assume c& = 0!2.) Assume T1 = T2, where subscripts 1 and 2 denote the inlet and exit of the pipe.
APPROACH
To establish laminar or turbulent ow, calculate the Reynolds number. Then ndthe appropriate friction factor (b) and apply the Darcy-Weisbach equation to ndthe head loss. Next, nd the pressure drop using the energy equation. Lastly, ndpower using * = /)M( !
ANALYSIS
Reynolds number
Re =, 1
:
=(2m$ s) (0!0622m)
(1!31× 10"6m2$ s)= 94' 960
Thus, ow is turbulent.
Friction factor (b) (Swamee-Jain equation)
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
hlog10
³5474
94I960049
´i2
= 0!0181
Darcy-Weisbach equation
M( = b2
1
, 2
2)
= 0!0181
µ50m
0!0622m
¶(2m$ s)2
2× 9!81m$ s2= 2!966m
857
M( = 2!97m (part b)
Energy equation
%1(+ T1
, 212)+ R1 + M, =
%2(+ T2
, 222)+ R2 + M5 + ME
Select a control volume surrounding the pipe. After analysis of each term, the energyequation simplies to
%1(
=%2(+ M(
or !% = (M(
=¡9810N$m3
¢(2!966m)
= 29' 096 kPa
!% = 29!1 kPa (part a)
Flow rate equation
/ = #I,
=¡1000 kg$m3
¢Ã0 (0!0622m)2
4
!(2m$ s)
= 6!077 kg$ s
Power equation
. = /)M(
= (6!077 kg$ s)¡9!81m$ s2
¢(2!966m)
= 176!8W
Power to overcome head loss = 177W (part c)
COMMENTS
1. The pressure drop (29 kPa) is about 1/3 of an atmosphere This value could bedecreased by increasing the pipe diameter to lower the speed of the water.
2. The power to overcome the frictional head loss is small, about 1/4 of a horse-power.
858
PROBLEM 10.31
Situation: Water @ 70!F ows through a pipe. 1 = 6 in ] = 2 cfs
Find: Resistance coe"cient.
Properties: From Table A.5 :(70oF)= 1!06× 10"5 ft2$s
ANALYSIS
Reynolds number
Re =4]
01:
=4× 2
0 × (6$12)× (1!06× 10"5)= 4!8× 105
From Fig. 10.8 or the Swamee and Jain correction (Eq. 10.26)
b = 0!013
859
PROBLEM 10.32
Situation: Water @ 10!C ows through a pipe. 1 = 25 cm ] = 0!06m3$ s!
Find: Resistance coe"cient.
Properties: From Table A.5 :(10oC) = 1!31× 10"6 m2$s.
ANALYSIS
Re =4]
01:
=4× 0!06
0 × 0!25× (1!31× 10"6)= 2!33× 105
From Fig. 10.8 or the Swamee and Jain correction (Eq. 10.26)
b = 0!015
860
PROBLEM 10.33
Situation: Air (20!C) ows through a smooth tube.] = 0!015m3$ s 1 = 3cm % = 110 kPa-absolute
Find: Pressure drop per meter of tube length
Properties: From Table A.3 7(20o) = 1!81× 10"5 N·s/m2!
ANALYSIS
, =]
I
=0!015
0$4× 0!032
= 21!2 m/s
# =%
"&
=110' 000
287× 293= 1!31 kg/m3
Re =, 1#
7
=21!2× 0!03× 1!311!81× 10"5
= 46031
Friction factor (b) (Moody diagram-Fig. 10-8)
b = 0!0212
Darcy Weisbach equation
M( = b2
1
, 2
2)
= 0!0212
µ1m
0!03m
¶Ã(21!2m$ s)2
2× 9!81m$ s2
!
= 16!19m for a 1.0 m length of pipe
Pressure drop is given by applying the energy equation to a 1.0 m length of pipe
!% = M(#)
= (16!19m)¡1!31 kg$m3
¢ ¡9!81m$ s2
¢
= 207!6Pafor a 1.0 m length of pipe
!,E= 208 Pa
m
861
PROBLEM 10.34
Situation: Glycerin ows through a commercial steel pipe–other details are providedin the problem statement.
Find: Height di!erential between the two standpipes.
Properties: Glycerin at 20 !C from Table A.4: # = 1260 kg$m3, 6 = 1!26' ( =12' 300N$m3, 7 = 1!41N · s$m2, : = 1!12× 10"3m2$ s!
ANALYSIS
Energy equation (apply from one standpipe to the other)
%1$( + T1,21 $2) + R1 = %2$( + T2,
22 $2) + R2 + ME
%1$( + R1 = %2$( + R2 + ME
((%1$() + R1))" ((%2$() + R2) = ME
!M = ME
Reynolds number
Re =, 1
:
=(0!6)(0!02)
1!12× 10"3= 10!71
Since Re G 2000' the ow is laminar. The head loss for laminar ow is
ME =3272,
(12
=(32)(1!41)(1)(0!6)
12300× 0!022= 5! 502m
Energy equation
!M = ME
= 5.50 m
862
PROBLEM 10.35
Situation: Air ows through a smooth tube–other details are provided in the problemstatement.
Find: Pressure drop per foot of tube.
Properties: From Table A.3 7(80oF) = 3!85× 10"7 lbf-s/ft2!
ANALYSIS
, = ]$I = 25× 4$(60× 0 × (1$12)2) = 91!67 ft/s# = %$("& ) = 15× 144$(1716× 540) = 0!00233 slugs/ft3
Re = , 1#$7 = 91! 67× (1$12)× 0!00233$(3!85× 10"7)= 4!623× 104
Resistance coe"cient (b) (Swamee-Jain correlation; turbulent ow)
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
hlog10
³5474
(44623×104)049
´i2
= 0!0211
Pressure drop
!% = b2
1
µ#, 2
2
¶
= 0!0211
µ1 ft
1$12 ft
¶µ0!00233× 91!672
2
¶
= 2! 479 psf/ft
!% = 2!48 psf/ft
863
PROBLEM 10.36
Situation: A pipe is being using to measure viscosity of a uid–details are providedin the problem statement
Find: Kinematic viscosity.
ANALYSIS
M( = b(2$1)(, 2$2))
0!50 = b(1$0!01)(32$(2× 9!81))b = 0!0109
At this value of friction factor, Reynolds number can be found from the Moodydiagram (Fig. 10.8)—the result is
Re = 1!5× 106
Thus
: =, 1
Re
=(3)(0!01)
1!5× 106
= 2!0× 10"8 m2/s
864
PROBLEM 10.37
Situation: Water ows through a pipe–details are provided in the problem statement.
Find: Resistance coe"cient.
ANALYSIS
!M = M( = 0!90(2!5" 1) = 1!35 ft of waterM( = b(2$1), 2$2)
b = 1!35× (0!05$4)× 2× 9!81$32
= 0.037
865
PROBLEM 10.38
Situation: Water ows through a cast-iron pipe. 1 = 10 cm , = 4m$ s
Find: (a) Calculate the resistance coe"cient.(b) Plot the velocity distribution.
Properties: From Table A.5 :(10oC) = 1!31× 10"6 m2$s.
ANALYSIS
Re =, 1
:
=4(0!1)
1!31× 10"6= 3! 053× 105
Sand roughness height
c&1
=0!00026
0!1= 0!002 6
Resistance coe"cient (Swamee-Jain correlation; turbulent ow)
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
hlog10
³04002 6347
+ 5474(34 053×105)049
´i2
= 0!0258
b = 0!0258
Velocity prole (turbulent ow)
@
@&= 5!75 log (
?
c&) + 8!5
Friction velocity(@&)
@& =pB 0$# (1)
Resistance coe"cient
B ! =b
4
µ#, 2
2
¶(2)
Combine Eqs. (1) and (2)
866
@& = ,
rb
8
= 4
r0!0258
8= 0!227 2m$ s
Velocity prole
@ = (0!227 2m$ s)h5!75 log
³ ?
0!00026
´+ 8!5
i
The distance from the wall (?) is related to pipe radius (") and distance from thecenterline (3) by
? = "" 3
Velocity Prole
@(3) = (0!227 2m$ s)
·5!75 log
µ0!025" 30!00026
¶+ 8!5
¸
Plot
1.5
2
2.5
3
3.5
4
4.5
y
0 0.005 0.01 0.015 0.02x
867
PROBLEM 10.39
Situation: Flow passes through a pipe–details are provided in the problem statement.
Find: Resistance coe"cient.
ANALYSIS
Re = , A$:
= (1)(0!10)$(10"4)
= 103 (laminar)
b = 64$Re
= 64$1000
= 0.064
Case (a) is correct
868
PROBLEM 10.40
Situation: Water (20!-) ows through a brass tube. Smooth walls (c& = 0) !Tube diameter is 1 = 3 cm! Flow rate is ] = 0!002m3$ s!
Find: Resistance coe"cient
ANALYSIS
Flow rate equation
, =]
I
=0!002
0$4× 0!032
= 2!83 m/s
Reynolds number
Re = , 1$:
= 2!83× 0!03$10"6
= 8!49× 104
Friction factor (b) (Swamee-Jain correlation—Eq. 10.26)
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
hlog10
³0 + 5474
(8449×104)049
´i2
b = 0!0185
869
PROBLEM 10.41
Situation: A train travels through a tunnel.Air in the tunnel (assume & = 60!H ) will modeled using pipe ow concepts.Additional details are provided in the problem statement
Find: (a) Change in pressure between the front and rear of the train.(b) Power required to produce the air ow in the tunnel.(c) Sketch an EGL and a HGL.
Properties: From Table A.3 ( = 0!0764 lbf/ft3 and : = 1!58× 10"4 ft2$s
APPROACH
Apply the energy equation from front of train to outlet of tunnel.
ANALYSIS
Energy equation
%1$( + T1,21 $2) + R1 = %2$( + T2,
22 $2) + R2 + ME
%1$( + ,21 $2) = 0 + 0 + 0 + , 22 $2) + b(2$1),
22 $2)
%1$( = b(2$1), 2$2)
c&$1 = 0!05$10 = 0!005
Re = , 1$: = (50)(10)$(1!58× 10"4) = 3!2× 106
Resistance coe"cient (from Moody diagram, Fig. 10.8)
b = 0!030
Darcy Weisbach equation
%1 = (b(2$1)(, 2$2))
= (0!0764)(0!03)(2' 500$10)(502$(64!4))
%1 = 22!24 psfg
Energy equation (from outside entrance to rear of train)
870
%3$( + T3,23 $2) + R3 = %4$( + T4,
24 $2) + R4 +
XME
0 + 0 + 0 = %4$( + ,24 $2) + 0 + (<G + b(2$1)),
2$2)
%4$( = "(, 2$2))(1!5 + b(2$1))= "(502$2))(1!5 + 0!03(2' 500$10))
%4 = "((349!4) = "26!69 psf!% = %1 " %4
= 22!24" ("26!69)
= 48.93 psf
Power equation
* = H,
= (!%I)(50)
= (48!93× 0$4× 102)(50)= 192' 158 ft-lbf/s
= 349 hp
EGLHGL
EGLHGL
Train
871
PROBLEM 10.42
Situation: A siphon tube is used to drain water from a jug into a graduated cylinder.Atube = 3$16 in. = 0!01562 ft 2tube = 50 in.Additional details are provided in the problem statement.
Find: Time to ll cylinder.
Assumptions: & ' 60oF with : = 1!2× 10"5 ft2$s.Neglect head loss associated with any bend in the Tygon tube.
ANALYSIS
Energy equation (from the surface of the water in the jug to the surface in the grad-uated cylinder)
%V$( + TV,2V $2) + RV = %1$( + T1,
21 $2) + R1 +
XME (1)
Assume that the entrance loss coe"cient is equal to 0.5. It could be larger than 0.5,but this should yield a reasonable approximation. Therefore
XME = (0!5 + b2$1 +<W),
2$2)
The exit loss coe"cient, <W, is equal to 1.0. Therefore, Eq. 1 becomes
!R = RV " R1 = (, 2$2))(1!5 + b2$1)
or , =p2)!R$(1!5 + b2$1) (1)
=p2)!R$(1!5 + b × 267)
Assume b = 0!03 and let !R = (21" 2!5)$12 = 1!54 ft. Then
, =p(2))(1!54)$(1!5 + 10!7)
= 2! 85 ft/s
Re =, 1
:
=2!85× !015621!2× 10"5
= 3710
Resistance coe"cient (recalculate)
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
£log10
¡0 + 5474
3710049
¢¤2
= 0!040
872
Repeat calculations with a new value of friction factor.
, =p2) × 1!54$(1!5 + 10!68)
= 2!85 ft/s
Re =, 1
:= 3710
h
dh
Fig. A
Use b = 0!040 for nal solution. As a simplifying assumption assume that as thecylinder lls the level of water in the jug has negligible change. As the cylinder isbeing lled one can visualize (see gure) that in time AP a volume of water equal to]AP will enter the cylinder and that volume in the cylinder can be expressed asI1AM'that is
]AP = I1AM
AP = (I1$])AM
But] = ,5I5 (3)
so
AP = ((I1$I5)$, )AM
Substitute , of Eq. (1) into Eq. (2):
AP = (I1$I5)$(2)!R$(1!5 + 267b))1*2AM
(1 = !500 liter = 0!01766 ft3
or
0!01766 = I1 × (11!5 in.$12)I1 = 0!01842 ft2
Itube = (0$4)((3$16)$12)2 = 0!0001917 ft2
I1$I5 = 96!1
The di!erential equation becomes
873
AP = 96!1$(2)!R$(1!5 + 10!9))1*2AM
Let M be measured from the level where the cylinder is 2 in full. Then
!R = ((21 in" 2!5 in)$12)" M!R = 1!542" M
Now we have
AP = 96!1$(2)(1!54" M)$12!2)1*2AMAP = 42!2$(1!54" M)1*2AMAP = "42!2$(1!54" M)1*2("AM)
Integrate:
P = "42!2(1!54" M)1*2$(1$2)|70= "84!4(1!54" M)1*2|04750
= "84!4[(0!79)1*2 " (1!54)1*2]= "84!4(0!889" 1!241)= 29.7 s
COMMENTS
Possible problems with this solution: The Reynolds number is very close to the pointwhere turbulent ow will occur and this would be an unstable condition. The owmight alternate between turbulent and laminar ow.
874
PROBLEM 10.43
Situation: Water ows from an upper reservoir to a lower reservoir—additional detailsare provided in the problem statement.
Find: (a) Elevation of upper reservoir. (b) Sketch the HGL and EGL. (c) Locationof minimum pressure; value of minimum pressure and (d) What is the type of pipe?
APPROACH
Apply the energy equation between water surfaces of the reservoirs. Then to deter-mine the magnitude of the minimum pressure, write the energy equation from theupstream reservoir to just downstream of bend.
ANALYSIS
Energy equation
%1$( + T1,21 $2) + R1 = %2$( + T2,
22 $2) + R2 +
XME
0 + 0 + R1 = 0 + 0 + 100 +X
ME
where XME = (<G + 2<0 +<W + b2$1)(,
2$2))
and <G = 0!50; <0 = 0!40 (assumed); <W = 1!0; b2$1 = 0!025× 430$1 = 10!75
, = ]$I = 10!0$((0$4)× 12) = 12!73 ft/sthen
R1 = 100 + (0!5 + 2× 0!40 + 1!0 + 10!75)(12!732)$64!4= 133 ft
Answer ! The point of minimum pressure will occur just downstream of the rstbend as shown by the hydraulic grade line (below).
H.G.L.E.G.L.
pmin.
Energy equation
R1 = R0 + %0$( + ,2$2) + (b2$1), 2$2) +<G,
2$2) +<0,2$2)
%0$( = 133" 110!70" (12!732$64!4)(1!9 + 0!025× 300$1) = "1!35 ft%> = "1!35× 62!4 = -84 psfg = -0.59 psigRe = , 1$: = 12!73× 1$(1!41× 10"5) = 9!0× 105
875
With an b of 0.025 at a Reynolds number of 9 × 105 a value for c&$1 of 0.0025(approx) is read from Fig. 10-8. Answer ! From Table 10.2 the pipe appears to befairly rough concrete pipe.
876
PROBLEM 10.44
Situation: Water ows out of reservoir, through a steel pipe and a turbine.Additional details are provided in the problem statement.
Find: Power delivered by turbine.
Properties: From Table A.5 :(70oF)= 1!06× 10"5 ft2$s
Assumptions: turbulent ow, so T2 % 1.
APPROACH
Apply the energy equation from the reservoir water surface to the jet at the end ofthe pipe.
ANALYSIS
Energy equation
%1$( + T1,21 $2) + R1 = %2$( + T2,
22 $2) + R2 + M- +
XME
0 + 0 + R1 = 0 + T2,22 $2) + R2 + M- + (<G + b2$1),
2$2)
R1 " R2 = M- + (1 + 0!5 + b2$1),2$2)
100 ft = M- + (1!5 + b2$1),2$2)
But
, = ]$I = 5$((0$4)12) = 6!37 ft/s
, 2$2) = 0!629 ft
Re = , 1$: = 6!0× 105
From Fig. 10.8 b = 0!0140 for c&$1 = 0!00015! Then
100 ft = M- + (1!5 + 0!0140× 1' 000$1)(0!629)M- = (100" 9!74) ft
Power equation
* = ](M- × e!= 5× 62!4× 90!26× 0!80= 22' 529 ft · lbf/s
= 40.96 horsepower
877
PROBLEM 10.45
Situation: A uid ows in a smooth pipe. 7 = 10"2N · s$m2 # = 800 kg$m3
1 = 100mm , = 500mm$ s
Find: (a) Maximum velocity.(b) Resistance coe"cient.(c) Shear velocity.(d) Shear stress 25 mm from pipe center.(e) Determine if the head loss will double if discharge is doubled.
ANALYSIS
Reynolds number
Re =, 1#
7
=(0!5)(0!1)(800)
10"2
= 4000
Because Re F 2000' assume the ow is turbulent.
a) Table 10.1 relates mean and centerline velocity. From this table,
,max = , $0!791
= 0!50$0!791
= 0.632 m/s
b) Resistance coe"cient (from Moody diagram, Fig. 10.8)
b = 0!041
c) Shear velocity is dened as
@& =
rB !#
(1)
Wall shear stress
B ! =b
4
#, 2
2Combine equations
@& = ,
µb
8
¶045
= (0!5)
µ0!041
8
¶045
r0!041× 0!52
8
= 0!0358m/ s
878
d) In a pipe ow, shear stress is linear with distance from the wall. The distanceof 25 mm from the center of the pipe is half way between the wall and thecenterline. Thus, the shear stress is 1/2 of the wall value:
B 25 mm =B !2
The shear stress at the wall is given by Eq. (1)
B ! = #@2&= 800× 0!03582
= 1!025N$m2
Thus
B 25 mm =B !2
=1!025N$m2
2
= 0.513 N/m2
e) If ow rate (]) is doubled, the velocity will also double. Thus, head loss will begiven by
M( = bnew
µ2
1
¶(2, )2
2)
The increase in velocity will increase Reynolds number, thereby decreasing thefriction factor so that bnew G !boriginal Overall the head loss will increase byslightly less than a factor of 4.0.
No, the increase in head loss will be closer to a factor of 4.0
879
PROBLEM 10.46
Situation: This problem involves an energy grade line for steady ow in a pipe inwhich no pumps or turbines are present.
Find: Which statements are true about this EGL.
ANALYSIS
The valid statements are: a, b, d. For cases c & e:
Re = , 1$:
= (1)(1)$(10"6)
= 106
Since Re F 3000' the ow at 1 m/s is in the turbulent range; therefore, the head losswill be more than doubled with a doubling of the velocity.
880
PROBLEM 10.47
Situation: A gure with an EGL and an HGL is missing physical details in somesections.
Find: (a) What is at points A and C.(b) What is at point B.(c) Complete the physical setup after point D.(d) The other information indirectly revealed by the EGL and HGL.
ANALYSIS
a) Pumps are at A and Cb) A contraction, such as a Venturi meter or orice, must be at B.c)
converging pipe
ReservoirC D
d) Other information:(1) Flow is from left to right(2) The pipe between AC is smaller than before or directly after it.(3) The pipe between BC is probably rougher than AB.
881
PROBLEM 10.48
Situation: Water (20oC) ows in cast iron pipe. 1 = 15 cm ] = 0!05m3$ s c& =0!26mmfrom Table A.5 :(20oC)= 10"6 m2$s
Find: (a) Shear stress at the wall.(b) Shear stress 1 cm from wall.(c) Velocity 1 cm from wall.
Properties: Table A.5 (water at 20 !C): # = 998 kg$m3 ' : = 1!00× 10"6m2$ s!
ANALYSIS
Flow rate equation
, =]
I=
0!05
(0$4)× 0!152
= 2!83 m/s
Reynolds number
Re =, 1
:=2!83× 0!1510"6
= 4!2× 105
Relative roughness
c&1
=0!26mm
150mm= 1! 733× 10"3
Resistance coe"cient (Swamee Jain correlation)
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
hlog10
³14 733×10"3
347+ 5474
(442×105)049
´i2
= 0!0232
Eq. (10-21)
B 0 = b#, 2$8
B 0 = 0!0232× 998× 2!832$8
= 23.2 N/m2
882
In a pipe ow, the shear stress variation is linear; thus,
B 1 = (6!5$7!5)× B 0= 20.0 N/m2
Velocity distribution (turbulent ow)
@& =
rB 0#=
r23!2
998
= 0!1524 m/s
@
@&= 5!75 log
µ?
c&
¶+ 8!5
@ = @&
µ5!75 log
µ?
c&
¶+ 8!5
¶
= 0!1524
µ5!75 log
µ0!01
0!00026
¶+ 8!5
¶
= 2!684m$ s
@ = 2!68m$ s
883
PROBLEM 10.49
Situation: Water ows from one reservoir to another–additional details are given inthe problem statement.
Find: Design a conduit system.
ANALYSIS
One possibility is shown below:
E1 = 100 m
E1 = 85 m-
H.G.L.
E.G.L.
E1 = 70 m
E1 = 55 m-
20 m
Assume that the pipe diameter is 0!50 m. Also assume <0 = 0!20' and b = 0!015!Then
100" 70 = (0!5 + 2× 0!20 + 1 + 0!015× 130$0!5), 2$2), 2$2) = 5!17
The minimum pressure will occur just downstream of the rst bend and its magnitudewill be as follows:
%min$( = 100" 85" (0!5 + 0!20 + 1 + ((0!015× 80$0!5) + 1), 2$2)= "6!20 m
%min = "6!20× 9' 810= -60.8 kPa gage
884
PROBLEM 10.50
Situation: Water is pumped through a vertical steel pipe to an elevated tank on theroof of a building–additional details are provided in the problem statement.
Find: Pressure at point 80 m above pump.
ANALYSIS
Re = 4]$(01:)
= 4× 0!02$(0 × 0!10× 10"6) = 2!55× 105
c&$1 = 4!6× 10"2$100 = 4!6× 10"4
Resistance coe"cientb = 0!0185
Then
M( = (b(2$1),2$2)
where
, = 0!02$((0$4)× 0!12) = 2!546 m/sM( = 0!0185× (80$0!10)× 2!5462$(2× 9!81) = 4!89 m
Energy equation (from pump to location 80 m higher)
%1$( + T1,21 $2) + R1 = %2$( + T2,$2) + R2 + M(
1!6× 106$9' 790 + , 21 $2) = %2$( + ,22 $2) + 80 + 4!89
,1 = ,2
%2 = 769 kPa
885
PROBLEM 10.51
Situation: Water drains from a tank through a galvanized iron pipe. 1 = 1 in!Total elevation change is 14 ft. Pipe length = 10 ft.
Find: Velocity in pipe.
Properties: Kinematic viscosity of water is 1!22× 10"5 ft2$ s! From Table 10.3 <G =0!5! From Table 10.3, c& = 0!006 inches.
Assumptions: Assume turbulent ow (check after calculations are done). AssumeT1 % 1!00!
APPROACH
Apply the energy equation from the water surface in the tank to the outlet of thepipe. Use the Darcy-Weisbach equation for head loss. Assume turbulent ow andthen solve the resulting equations using an iterative approach.
ANALYSIS
Energy equation
%1(+ T1
, 212)+ R1 =
%2(+ T2
, 222)+ R2 +
XME
0 + 0 + 14 = 0 +, 222)+ 0 + (<G + b
2
1), 222)
14 ft =
µ1 +<G + b
2
1
¶, 222)
14 ft =
µ1 + 0!5 + b
(120 in)
(1 in)
¶, 222)
(1)
Eq. (1) becomes
, 2 =2× (32!2 ft$ s2)× (14 ft)
1!5 + 120× bGuess b = 0!02 and solve for ,
, 2 =2× (32!2 ft$ s2)× (14 ft)
1!5 + 120× 0!02, = 15!2 ft$ s
Reynolds number (based on the guessed value of friction factor)
Re =, 1
:
=(15!2 ft$ s) (1$12 ft)
1!22× 10"5 ft2$ s= 103' 856
886
Resistance coe"cient (new value)
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
£log10
¡04006347
+ 5474103856049
¢¤2
= 0!0331
Recalculate , based on b = 0!0331
, 2 =2× (32!2 ft$ s2)× (14 ft)1!5 + 120× 0!0331
, = 12!82 ft$ s
Reynolds number (recalculate based on , = 12!82 ft$ s)
Re =(12!8 ft$ s) (1$12 ft)
1!22× 10"5 ft2$ s= 874' 316
Recalculate b based on Re = 874' 316
b =0!25
£log10
¡04006347
+ 5474874316049
¢¤2
= 0!0333
Recalculate , based on b = 0!0333
, 2 =2× (32!2 ft$ s2)× (14 ft)1!5 + 120× 0!0333
, = 12!80 ft$ s
Since velocity is nearly unchanged, stop!
, = 12!80 ft$ s
1. The Reynolds number 874,000 is much greater than 3000, so the assumption ofturbulent ow is justied.
2. The solution approach, iteration with hand calculations, is straightforward.However, this problem can be solved faster by using a computer program thatsolves simultaneous, nonlinear equations.
887
PROBLEM 10.52
Situation: Water drains from a tank, passes through a pipe and then jets upward.Additional details are provided in the problem statement.
Find: (a) Exit velocity of water.(b) Height of water jet.
Properties: From Table 10.2 c& = 0!15 mm = 0!015 cm.From Table 10.3 <0 = 0!9 and <G = 0!5!
Assumptions: The pipe is galvanized iron.The water temperature is 20oC so : = 10"6 m2$s.Relative roughness c&$1 = !015$1!5 = 0!01. Start iteration at b = 0!035!
APPROACH
Apply the energy equation from the water surface in the tank to the pipe outlet.
ANALYSIS
Energy equation
%1$( + T1,21 $2) + R1 = %2$( + T2,
22 $2) + R2 +
XME
0 + 0 + 5 = 0 + T2,22 $2) + 0 + (<G + 2<0 + b2$1),
22 $2)
5 = (, 22 $2))(1 + 0!5 + 2× 0!9 + !035× 10$0!015)5 = (, 22 $ (2× 9!81))(26!6),2 = 1!920 m/s
Reynolds number
Re = , 1$:
= 1!92× 0!015$10"6
= 2!88× 104!
Resistance coe"cient (new value)
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
£log10
¡0401347+ 5474
28800049
¢¤2
= 0!040
Recalculate ,2 with this new value of b
,2 = 1!81 m/s
888
Energy equation (from the pipe outlet to the top of the water jet)
M = , 2$2)
= (1!81)2$(2× 9!81)= 0.1670 m
= 16.7 cm
889
PROBLEM 10.53
Situation: Water (60!F) is pumped from a reservoir to a large pressurized tank.Additional details are given in the problem statement.
Find: Power to operate the pump.
Properties: From Table A.5 : = 1!22× 10"5 ft2$sFrom Table 10.2 c& = 0!002 in = 1! 67× 10"5 ftFrom Table 10.3 <G = 0!03
Assumptions: Assume the entrance is smooth.
ANALYSIS
Flow rate equation
, = ]$I = 1!0$((0$4)12)
= 1!0$((0$4)(1$3)2)
= 11!46 ft/s
Then
Re = 11!46× (1$3)$(1!22× 10"5) = 3!13× 105
c&$1 = 4!5× 10"4
Resistance coe"cient (from Moody diagram, Fig. 10.8)
b = 0!0165
Then
b2$1 = 0!0165× 300$(1$3) = 14!86
Energy equation (from water surface I to water surface D)
%=$( + T=,2=$2) + R= + M, = %2$( + T2,
22 $2) + R2 +
XME
0 + 0 + 0 + M, = (10× 144$62!4) + 0 + (<G +<W + b2$1),2$2)
Thus
M, = 23!08 + (0!03 + 1 + 14!86)(11!462$64!4)
= 55!48 ft
Power equation
890
* =](M,g
=1!0× 62!4× 55!48
0!9= 3847 ft · lbf/s= 6.99 horsepower
891
PROBLEM 10.54
Situation: A pump operates between a reservoir and a tank.Additional details are provided in the problem statement
Find: Time to ll tank.
Properties: From Table 10.3 <G = 0!5 and <W = 1!0!
APPROACH
Apply the energy equation from the reservoir water surface to the tank water surface.The head losses will be due to entrance, pipe resistance, and exit.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 + M, = %2$( + ,
22 $2) + R2 +
XME
0 + 0 + R1 + M, = 0 + 0 + R2 + (<G + b2$1 +<W),2$2)
M, = (R2 " R1) + (0!5 + (0!018× 30$0!9) + 1!0), 2$2)M, = M+ (2!1), 2$2)
But the head supplied by the pump is M!(1" (]2$]2max)) so
M!(1"]2$]2max)) = M+ 1!05, 2$)
50(1"]2$4) = M+ 1!05]2$()I2)
50" 12!5]2 = M+ 1!05]2$()I2)
AreaI = (0$4)12 = (0$4)(0!92) = 0!63m2
So
50" 12!5]2 = M+ 0!270]2
50" M = 127!77]2&50" M = 3!57]
The discharge into the tank and the rate of water level increase is related by
] = ItankAM
APso
&50" M = 3!57Itank
AM
APor
892
AP = 3!57Itank(50" M)"1*2AM
Integrating
P = 2× 3!57Itank(50" M)1*2 + -
when P = 0, M = 0 and Itank = 100 m2 so
P = 714(7!071" (50" M)1*2)
When M = 40 m
P = 2791 s
= 46.5 min
893
PROBLEM 10.55
Situation: Kerosene is pumped through a smooth pipe. 1 = 3 cm , = 4m$ s!Additional details are provided in the problem statement
Find: Ratio of head loss for laminar ow to head loss for turbulent ow.
(ME)Laminar ow(ME)Turbulent ow
ANALYSIS
Reynolds number
Re =, 1
:
=4× 0!032× 10"6
= 6× 104
If the ow is laminar at this Reynolds number
blam =64
Re
=64
6× 104= 1! 07× 10"3
Resistance coe"cient (from Moody diagram, Fig.10-8)
bturb = 0!020
Then
(ME)Laminar ow(ME)Turbulent ow
=M(lamM(turb
=blambturb
=0!00107
0!02
= 0.0535
894
PROBLEM 10.56
Situation: Water ows in a uncoated cast iron pipe. 1 = 4 in ] = 0!02 ft3$ s!
Find: Resistance coe"cient b!
Properties: From Table A.5 : = 1!22× 10"5 ft2$sFrom Table 10.2 c& = 0!01 in
ANALYSIS
Reynolds number
Re =4]
01:
=4× 0!02
0 × (4$12)× (1!22× 10"5)= 6!3× 103
Sand roughness height
c&1
=0!01
4= 0!0025
Resistance coe"cient (from Moody diagram, Fig. 10.8)
b = 0!038
895
PROBLEM 10.57
Situation: Fluid ows in a concrete pipe. 1 = 6 in 2 = 900 ft ] = 3 cfs !7 =#: = 0!005 lbf-s/ft2
Additional details are provided in the problem statement
Find: Head loss.
ANALYSIS
Reynolds number
Re = 4]$(01:)
= 4(3!0)$(0(1$2)3!33× 10"3)= 2294 (laminar)
Flow rate equation
, = ]$(012$4)
= 3!0$(0$4× 0!52)= 15!28 ft/s
Head loss (laminar ow)
M( = 3272,$((12)
= 32(5× 10"3)900(15!28)$(1!5× 32!2× (1$2)2)
= 182.2 ft
896
PROBLEM 10.58
Situation: Crude oil ows through a steel pipe. 1 = 15 cm ] = 0!03m3$ s!Points A and B are 1 km apart. %> = 300 kPaAdditional details are provided in the problem statement.
Find: Pressure at point I!
Properties: From Table 10.2 c& = 4!6× 10"5 m.
ANALYSIS
Reynolds number
Re = , 1$:
= 4]$(01:)
= 4× 0!03$(0 × 0!15× (10"2$820))2!09× 104 (turbulent)
Sand roughness height
c&$1 = 4!6× 10"5$0!15= 3!1× 10"4
Flow rate equation
, = ]$I
= 0!03$(0 × 0!152$4)= 1!698 m/s
Resistance coe"cient (from Moody diagram, Fig. 10.8)
b = 0!027
Darcy Weisbach equation
M( = b2
1
, 2
2)
= 0!027
µ1000
0!15
¶µ1!6982
2× 9!81
¶
= 26!4 m
Energy equation
%=$( + T=,2=$2) + R= = %>$( + T>,
2>$2) + R> + M(
%= = 0!82× 9810[(300000$(0!82× 9810)) + 20 + 26!41]= 673 kPa
897
PROBLEM 10.59
Situation: Water exits a tank through a short galvanize iron pipe. 1tank = 2m 1pipe =26mm 2pipe = 2!6mFully open angle valve: <v = 5!0
Find: (a) Time required for the water level in tank to drop from 10 m to 2 m.
Assumptions: The pipe entrance is smooth: <e % 0The kinetic energy correction factor in the pipe is T2 = 1!0
APPROACH
Apply the energy equation from the top of the tank (location 1) to the exit of theangle valve (location 2).
ANALYSIS
Energy equation
M = T2, 2
2)+, 2
2)(<e +<v + b
2
1)
Term by term analysis
T2 = 1!0
<e % 0' <v = 5!0
2$1 = 2!6$0!026 = 100!0
Combine equation and express , in terms of M
, =
s2)M
6 + 100× b
Sand roughness height
c&1=0!15
26= 5!8× 10"3
Reynolds number
Re =, × 0!02610"6
= 2!6× 104,
Rate of decrease of height
AM
AP= "
]
I= "
0!000531
3!14, = "0!000169,
A program was written to rst nd , iteratively for a given M using Eq. 10.26 forthe friction factor. Then a new M was found by
M: = M:"1 " 0!000169,!P
898
where !P is the time step. The result was 1424 sec or 23.7 minutes.
COMMENTS
1. When valves are tested to evaluate<valve the pressure taps are usually connectedto pipes both upstream and downstream of the valve. Therefore, the head lossin this problem may not actually be 5, 2$2)!
2. The velocity exiting the valve will probably be highly non-uniform; therefore,this solution should be considered as an approximation only.
899
PROBLEM 10.60
Situation: Water ows from point A to B in a cast iron pipe.Additional information is provided in the problem statement.
Find: Direction and rate of ow.
Properties: From Table A.5 : = 1!41× 10"5 ft2$s.From Table 10.2 c& = 0!01 in = 0!000833 ft.
Assumptions: Flow is from A to B.
ANALYSIS
M( = !(%$( + R)
= ("20× 144$62!4) + 30= "16!2 ft
Therefore, ow is from B to A.
Parameters for the Moody diagram
Re b1*2 = (13*2$:)(2)M($2)1*2
= (23*2$(1!41× 10"5)× 64!4× 16!2$(3× 5' 280))1*2
= 5!14× 104
c&$1 = 4! 2× 10"4
Resistance coe"cient (from the Moody diagram,Fig. 10.8)
b = 0!0175
Darcy Weisbach equation
, =qM(2)1$b2
=p(16!2× 64!4× 2)$(0!0175× 3× 5' 280)
= 2!74 ft/s
Flow rate equation
^ = , I
= 2!74× (0$4)× 22
= 8.60 cfs
900
PROBLEM 10.61
Situation: Water ows between two reservoirs. ] = 0!1m3$ s!The pipe is steel. 1 = 15 cm!Additional details are provided in the problem statement
Find: Power that is supplied to the system by the pump.
Properties: From Table 10.2 c& = 0!046 mm.
ANALYSIS
Flow rate equation
, = ]$I
= 0!10$((0$4)× 0!152)= 5!66 m/s
, 2$2) = 1!63 m
c&$1 = 0!0046$15 = 0!0003
Reynolds number
Re = , 1$: = 5!66× 0!15$(1!3× 10"6)= 6!4× 105
Resistance coe"cient (from the Moody diagram, Fig. 10.8)
b = 0!016
Energy equation (between the reservoir surfaces)
%1$( + T1,21 $2) + R1 + M, = %2$( + T2,
22 $2) + R2 +
XME
M, = R2 " R1 +, 2
2)(<G + b(2$1) +<E)
= 13" 10 + 1!63(0!1 + 0!016× 80$(0!15) + 1)= 3 + 15!7 = 18!7 m
Power equation
* = ](M,
= 0!10× 9810× 18!7= 18' 345W
= 18.3 kW
901
PROBLEM 10.62
Situation: Water ows between two reservoirs in a concrete pipe.Other details are provided in the problem statement.
Find: (a) Discharge (concrete pipe).(b) Discharge (riveted steel).(c) Pump power for uphill ow (concrete pipe).
Properties: From Table A.5 : = 1!31× 10"6 m2$s.
Assumptions: Based on data in Table 10.2, for concrete pipe c& = 0!3 mm, and forriveted steel c& = 0!9 mm
APPROACH
Apply the energy equation from upstream reservoir water surface to downstreamwater surface.
ANALYSIS
Energy equation
%1$( + T1,21 $2) + R1 = %2$( + T2,
22 $2) + R2 + ME
R1 = R2 + M(
100 m = (b2$1), 2$2)
c&$1 = 0!3$103 = 0!0003
Resistance coe"cient (from the Moody diagram,Fig. 10.8)
b = 0!016
Then100m = (0!016× 10' 000$1), 2$2)
, = (100(2))$(160))1*2 = 3!50 m/s
Reynolds number
Re = , 1$: = (3!50)(10)$(1!31× 10"6)= 2!67× 106
Check b from Fig. 10.8 (b = 0!0155) and solve again:
, = 3!55 m/s
]concrete = , I
= (3!55)(0$4)12
]concrete = 2!79 m3/s
902
For riveted steel: c&$1 = 0!9$1000 ' 001 and from Fig. 10.8 b = 0!0198!
]F4.$]1 =p0!0155$0!0198 = 0!885
]Riveted.Steel = 2!47 m3/s
Head of the pump
M, = (R1 " R2) + ME= 100 m+ 100(2!8$2!79)2
= 201 m
Power equation
* = ](M,
= (2!8)(9' 810)(201)
= 5.52 MW
903
PROBLEM 10.63
Situation: A uid ows through a pipe made of galvanized iron. 1 = 8cm : =10"6m2$ s # = 800 kg$m3!Additional details are provided in the problem statement
Find: Flow rate.
Properties: From Table 10.2 c& = 0!15 mm.
ANALYSIS
Energy equation
%1$( + T1,21 $2) + R1 = %2$( + T2,
22 $2) + R2 + M(
150' 000$(800× 9!81) + , 21 $2) + 0 = 120' 000$(800× 9!81) + , 22 $2) + 3 + M(M( = 0!823
((13*2)$(:))× (2)M($2)1*2 = ((0!08)3*2$10"6)× (2× 9!81× 0!823$30!14)1*2
= 1!66× 104
Relative roughness
c&$1 = 1!5× 10"4$0!08 = 1!9× 10"3
Resistance coe"cient. From Fig. 10-8 b = 0!025! Then
M( = b(2$1)(,2$2))
Solving for ,
, =q(M($b)(1$2)2)
=p(0!823$0!025)(0!08$30!14)× 2× 9!81 = 1!312 m/s
] = , I
= 1!312× (0$4)× (0!08)2
= 6!59× 10"3 m3/s
904
PROBLEM 10.64
Situation: Oil is pumped from a lower reservoir to an upper reservoir through a steelpipe. 1 = 30 cm ] = 0!20m3$ s!From Table 10.2 c& = 0!046 mmAdditional details are provided in the problem statement
Find: (a) Pump power.(b) Sketch an EGL and HGL.
APPROACH
Apply the energy equation between reservoir surfaces .
ANALYSIS
Energy equation
%1$( + T1,21 $2) + R1 + M, = %2$( + T2,
22 $2) + R2 +
XME
100 + M, = 112 + , 2$2)(<G + b2$1 +<W)
M, = 12 + (, 2$2)) (0!03 + b2$1 + 1)
Flow rate equation
, = ]$I
= 0!20$((0$4)× 0!302)= 2!83 m/s
, 2$2) = 0!408m
Reynolds number
Re = , 1$:
= 2!83× 0!30$(10"5)= 8!5× 104
c&$1 = 4!6× 10"5$0!3= 1!5× 10"4
Resistance coe"cient (from the Moody diagram, Fig. 10.8)
b = 0!019
Then
M, = 12 + 0!408(0!03 + (0!019× 150$0!3) + 1!0)= 16!3 m
905
Power equation
* = ](M,
= 0!20× (940× 9!81)× 16!3 = 2!67× 104W= 30.1 kW
EGLHGL
906
PROBLEM 10.65
Situation: In a pipe, the resistance coe"cient is b =0.06, 1 = 40 cm' , =3m$ s' : = 10"5m2$ s .
Find: Change in head loss per unit meter if the velocity were doubled.
ANALYSIS
Reynolds number
Re = , 1$:
= 3× 0!40$10"5
= 1!2× 105
Since Re F 3000, the ow is turbulent and obviously the conduit is very rough(b = 0!06); therefore, one would expect b to be virtually constant with increasedvelocity. Since M( = b(2$1) (, 2$2)), we expect, M( + , 2, so if the velocity isdoubled, the head loss will be quadrupled.
907
PROBLEM 10.66
Situation: A cast iron pipe joins two reservoirs. 1 = 1!0 ft 2 = 200 ft!Additional information is provided in the problem statement.
Find: (a) Calculate the discharge in the pipe.(b) Sketch the EGL and HGL.
Properties: From Table 10.2 c& = 0!01 in
Assumptions: Water temperature is 60oF: : = 1!22× 10"5 ft2$s 7 = 2!36× 10"5N ·s$m2 # = 1!94 slug$m3
APPROACH
Apply the energy equation from the water surface in the upper reservoir to the watersurface in the lower reservoir.
ANALYSIS
Energy equation
%1$( + T1,21 $2) + R1 = %2$( + T2,
22 $2) + R2 +
XME
0 + 0 + 100 = 0 + 0 + 40 + (<G + 2<v ++<W + b2$1),22$)
100 = 40 + (0!5 + 2× 0!2 + 1!0 + b × 200$1), 2$2)
The equation for , becomes
, 2
2)=
60
1!9 + 200b(1)
Relative roughness
c&1
=0!01
12= 8! 3× 10"4
Reynolds number
Re =, 1
:
=, × 1!0
1!22× 10"5=
¡8!20× 104 × ,
¢(2)
Friction factor (Swamee-Jain correlation—Eq. 10.26)
b =0!25
hlog10
³84 3×10"4
347+ 5474
(8420×104×? )049
´i2 (3)
908
Solve Eqs. (1) to (3) simultaneously (we applied a computer program, TK Solver)
, = 26!0m$ s
Re = 2' 130' 000
b = 0!019
Flow rate equation
] = , I
= 26!0(0$4× 12)
= 20.4 cfs
909
PROBLEM 10.67
Situation: A small stream lls a reservoir—water from this reservoir is used to createelectrical power.Discharge is ] = 2 cfs. Elevation di!erence is 4 = 34 ft.Maximum acceptable head loss in the penstock is M( =3 ft.Penstock length is 2 = 87 ft.Penstock is commercial-grade, plastic pipe.
Find: Find the minimum diameter for the penstock pipe.
Properties: Water @ 40 !F from Table A.5: : = 1!66× 10"5 ft2$ s!
Assumptions: 1.) Neglect minor losses associated with ow through the penstock.2.) Assume that pipes are available in even sizes—that is, 2 in., 4 in., 6 in., etc.3.) Assume a smooth pipe— c& = 0!4.) Assume turbulent ow (check this after the calculation is done).
APPROACH
Apply the Darcy-Weisbach equation to relate head loss (M() to pipe diameter. Applythe Swamee-Jain correlation to relate friction factor (b) to ow velocity. Also, writeequations for the Reynolds number and the ow rate. Solve these four equationssimultaneously to give values of 1' ,' b' and Re.
ANALYSIS
Darcy-Weisbach equation
M( = b2
1
, 2
2)(1)
Resistance coe"cient (Swamee-Jain correlation; turbulent ow)
b =0!25
£log10
¡5474Re049
¢¤2 (2)
910
Reynolds number
Re =, 1
:(3)
Flow rate equation
] = ,012
4(4)
Solve Eqs. (1) to (4) simultaneously. The computer program TKSolver was used forour solution.
b = 0!01448
, = 9!026 ft$ s
1 = 6!374 in
Re = 289' 000
Recommendation
Select a pipe with 1 = 8 in!
COMMENTS
With an 8-inch-diameter pipe, the head loss associated with ow in the pipe will beless than 10% of the total available head (34 ft). If an engineer selects a pipe that islarger that 8 inches, then cost goes up.
911
PROBLEM 10.68
Situation: Commercial steel pipe will convey water.Design head loss: ME = 1 ft per 1000 ft of pipe length.
Find: Pipe diameter to produce specied head loss.
Properties: From Table A.5 : = 1!22× 10"5 ft2/s.From Table 10.2 c& = 0!002 in = 1! 7× 10"4 ft!Assumptions: The pipes are available in even inch sizes (e.g. 10 in., 12 in., 14 in.,etc.)
ANALYSIS
Darcy Weisbach equation
M( = b2
1
, 2
2)
= b2
1
]2
2)I2
= b82]2
)0215
Solve for diameter
1 =
µb82]2
)02M(
¶1*5
Assume b = 0!015
1 =
Ã0!015
8 (1000) (300)2
32!2× 02 × 1
!1*5
= 8!06 ft
Now get a better estimate of b :
Re = 4]$(01:) = 3!9× 106
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
hlog10
³04002*12347×8406 +
5474(349×106)049
´i2
= 0!0104
Compute 1 again:
1 =
Ã0!0104
8 (1000) (300)2
32!2× 02 × 1
!1*5
= 7!49 ft
Thus, specify a pipe with 1 = 90 in
912
PROBLEM 10.69
Situation: A steel pipe will carry crude oil. 6 = 0!93 : = 10"5m2$ s ] =0!1m3$ s!Available pipe diameters are 1 = 20' 22' and 24 cm!Specied head loss: ME = 50m per km of pipe length.
Find: (a) Diameter of pipe for a head loss of 50 m.(b) Pump power.
Properties: From Table 10.2 c& = 0!046 mm.
ANALYSIS
Darcy Weisbach equation
M( = b2
1
, 2
2)
= b2
1
]2
2)I2
= b82]2
)0215
Solve for diameter
1 =
µb82]2
)02M(
¶1*5
Assume b = 0!015
1 =
Ã0!015
8 (1000) (0!1)2
9!81× 02 × 50
!1*5
= 0!19m
Calculate a more accurate value of b
Re = 4]$(01:)
= 4× 0!1$(0 × 0!19× 10"5)= 6!7× 104
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
£log10
¡04046347×190 +
547467000049
¢¤2
= 0!021
Recalculate diameter using new value of b
913
1 = (0!021$0!015)1*5 × 0!19= 0!203 m = 20!3 cm
Use the next larger size of pipe; 1 = 22 cm.
Power equation (assume the head loss is remains at ME % 50 m/1,000 m)
* = ](M(
= 0!1× (0!93× 9810)× 50
= 45.6 kW/km
914
PROBLEM 10.70
Situation: Design a pipe to carry water (] = 15 cfs) between two reservoirs.Distance between reservoirs = 3 mi.Elevation di!erence between reservoirs = 30 ft.
Find: Pipe diameter.
Assumptions: & = 60oF, : = 1!22× 10"5 ft2$s.Commercial steel pipe c& = 0!002 in = 0!00017 ft.
ANALYSIS
Energy equation30 = (<G +<W + b2$1)(]
2$I2)$2)
Assume b = 0!015! Then
30 = (1!5 + 0!015× 3× 5' 280$1)(]2$((0$4)214)$2)
30 = (1!5 + 237!6$1)(152$(0!61714)$64!4
30 = (1!5 + 237!6$1)(5!66$14)
Neglect the entrance and exit losses and solve
1 = 2!15 ft
Re = 4]$(01:)
= 7!3× 105
c&$1 = 0!002$(2!15× 12)= 0!000078
Resistance coe"cient (from the Moody diagram,Fig. 10.8)
b = 0!0135
Solve again
30 = (1!5 + 214$1)(5!66$14)
1 = 2!10 ft = 25!2 in.
Use 26 in. steel pipe. (one possibility)
915
PROBLEM 10.71
Situation: Problem 7.78 shows a device that can be used to demonstrate cavitation.Let 1 equal diameter of pipe
Find: Design a device that will visually demonstrate cavitation.
Assumptions: water main has a pressure of 50 psig.
ANALYSIS
First you might consider how to physically hold the disk in the pipe. One way todo this might be to secure the disk to a rod and then secure the rod to streamlinedvanes in the pipe such as shown below. The vanes would be attached to the pipe.
Vane
Rod
Side viewEnd view
Disk
To establish cavitation around the disk, the pressure in the water at this sectionwill have to be equal to the vapor pressure of the water. The designer will have todecide upon the pipe layout in which the disk is located. It might be somethinglike shown below. By writing the energy equation from the disk section to the pipeoutlet one can determine the velocity required at the disk to create vapor pressureat that sectional. This calculation will also establish the disk size relative to thepipe diameter. Once these calculations are made, one can calculate the requireddischarge, etc. Once that calculation is made, one can see if there is enough pressurein the water main to yield that discharge with the control valve wide open. If not,re-design the system. If it is OK, then di!erent settings of the control valve will yielddi!erent degrees of cavitation.
Outlet
Water mainValve
Reservoir
Elevation View
916
PROBLEM 10.72
Situation: A reservoir is described in the problem statement.
Find: Discharge.
Properties: From Table 10.2 c& = 4× 10"4 ft.From Table A.5 : = 1!41× 10"5 ft2$s.From Table 10.3 <G = 0!5!
APPROACH
Apply the energy equation from water surface in reservoir to the outlet.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 + ME
0 + 0 + 120 = 0 + , 2$2) + 70 + (<G ++<W + b(2$1)),2$2)
(, 2$2))(1!5 + b(2$1)) = 50 ft, 2
2)=
50
1!5 + 200b(1)
Sand roughness heightc&$1 = 4× 10"4$0!5 = 0!0008
Reynolds number
Re = 3!54× 104 × , (2)
Solve Eq. 10.26 (for b)'Eq. (1) and (2) simultaneously (we used a hand calculator).The result is
, = 24!6 ft/s
Flow rate equation
] = , I
= 24!6(0$4)(0!52)
= 4.83 cfs
EGL
HGL
917
PROBLEM 10.73
Situation: A reservoir is described in the problem statement.
Find: Minimum pressure in pipe.
Properties: From Table A.5 : = 1!41× 10"5 ft2$s.
Assumptions: <G = 0!10
APPROACH
Apply the energy equation from water surface in reservoir to the outlet.
ANALYSIS
Flow rate equation
, = ]$I
= 50 ft/s
Reynolds number
Re = , 1$:
= (50)(2)$(1!41× 10"5)= 7!1× 106
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 +
XME
0 + 0 + 600 = 0 + , 22 $2) + 200 + (<G + b(2$1)),2$2)
400 = (, 2$2))(1!10 + b(1' 200$2))
400 = (502$64!4)(1!10 + 600b)
b = 0!0153
From Fig. 10.8 c&$1 = 0!00035 so
c& = 0!00070 ft
The minimum pressure in the pipe is at the pipe outlet.
918
PROBLEM 10.74
Situation: A heat exchanger is described in the problem statement.
Find: Power required to operate heat exchanger with:(a) clean tubes.(b) scaled tubes.
Properties: From Table 10.2 c& = 0!15 mm.
ANALYSIS
/$tube = 0!50 kg/s
]$tube = 0!50$860 = 5!8139× 10"4 m3/s, = ]$I = 5!8139×10"4$((0$4)× (2× 10"2)2) = 1!851 m/sRe = , 1#$7 = 1!851× 0!02× 860$(1!35× 10"4) = 2!35× 105
c&$1 = 0!15$20 % 0!007
From Fig. 10.8 b = 0!034. Then
M( = b(2$1),2$2) = 0!034(5$0!02)× (1!8512$2× 9!81) = 1!48 m
a) * = ](M( = 5!8139× 10"4 × 860× 9!81× 1!48× 100
= 726 W
b) c&$1 = 0!5$16
= 0!031
so from Fig. 10.8 b = 0!058
* = 728× (0!058$0!034)× (20$16)4 = 3.03 kW
919
PROBLEM 10.75
Situation: A heat exchanger is described in the problem statement.
Find: Pump power required.
Assumptions: Smooth bends of 180!'<0 % 0!7
ANALYSIS
Examination of the data given indicates that the tubing in the exchanger has an3$A % 1.Energy equation
%1$( + ,21 $2) + R1 + M, = %2$( + ,
22 $2) + R2 + ME
But ,1 = ,2 and %1 = %2 so
M, = ME + (R1 " R2)
The average temperature = 50!- so : = 0!58× 10"6 m2/s
, = ]$I = 3× 10"4$(0$4(0!02)2) = 0!955 m/sRe = , 1$: = 0!955(0!02)$(0!58× (10"6) = 3!3× 104
b = 0!023
ME = (b2$1 + 19<0),2$2) = (0!023(20)$0!02 + 19× 0!7)0!9552$(2× 9!81)
= 1!69 m
M, = R2 " R1 + ME = 0!8 + 1!69 = 2!49 m* = (M,] = 9' 685(2!49)3× 10"4
= 7.23 W
920
PROBLEM 10.76
Situation: A heat exchanger is described in the problem statement.
Find: Power required to operate pump.
Properties: From Table A.5 : = 6!58× 10"7 m2$s.From Table 10.2 c& = 0!0015 mm.
ANALYSIS
Reynolds number
Re =0!02× 106!58× 10"7
= 3!04× 105
Flow rate equation
] =0
4× 0!022 × 10 = 0!00314 m3/s
Relative roughness (copper tubing)
c&1=1!5× 10"3 mm
20 mm= 7!5× 10"5
Resistance coe"cient (from Moody diagram)
b = 0!0155
Energy equation
M, =, 2
2)(b2
1+X
<E)
=102
2× 9!81(0!0155×
10 m0!02 m
+ 14× 2!2) = 196 m
Power equation
* =(]M,g
=9732× 0!00314× 196
0!8= 7487W
* = 7!49 kW
921
PROBLEM 10.77
Situation: A heat exchanger is described in the problem statement.
Find: System operating points.
Properties: From Table 10.2 c& = 1!5× 10"3 mm.
ANALYSIS
Energy equation
M, =, 2
2)(X
<E + b2
1)
Substitute in the values for loss coe"cients, 2$1 and the equation for M,
M,0
"1"
µ]
]max
¶3#=, 2
2)(14× 2!2 + b × 1000)
Flow rate equation
] = , I
= 1!767× 10"4,
Combine equations
M,0
"1"
µ]
]max
¶3#= 1!632× 106]2(30!8 + b × 1000) (1)
Relative roughness
c&1=1!5× 10"3
15= 10"4
Reynolds number
Re =, 1
:
=, × 0!0156!58× 10"7
= 2!28× 104, = 1!29× 108]
Eq. (1) becomes
H (]) = M,0
"1"
µ]
]max
¶3#" 1!632× 106]2(30!8 + b × 1000)
A program was written to evaluate H (]) by inputting a value for ] and tryingdi!erent ]’s until H (]) = 0! The results are
922
M,0 (m) ] (m3/s)2 0.00035610 0.00062920 0.000755
923
PROBLEM 10.78
Situation: A system with a reservoir and free jet is described in the problem state-ment.
Find: The discharge.(b) Points of maximum pressure.(c) Point of minimum pressure.
Assumptions: & = 60oF and : = 1!22× 10"5 ft2/s.3$A = 2 and <0 = 0!2!b = 0!028
ANALYSIS
c&$1 = 0!004
Energy equation
%1$( + R1 + ,21 $2) = %2$( + R2 + ,
22 $2) +
XME
100 = 64 + (, 2$2))(1 + 0!5 +<0 + b × 2$1)= 64 + (, 2$2))(1 + 0!5 + 0!2 + 0!028× 100$1)
36 = (, 2$2))(4!5)
, 2 = 72)$4!5 = 515 ft2$s2
, = 22!7 ft/s
Reynolds number
Re = 22!7(1)$(1!22× 10"5) = 1!9× 106
b = 0!028
Flow rate equation
] = 22!7(0$4)12
= 17.8 cfs
, 2$2) = 36$4!5 = 8!0 ft
EGL
HGL
Elev. = 64 ft
c) maximum pressure
minimum pressure
924
%min$( = 100" 95" (, 2$2))(1 + 0!5) = 5" 8(1!5) = "7 ft%min = "7(62!4) = "437 psfg = -3.03 psig
%max$( + ,2"$2) + R" = %2$( + R2 + ,
22 $2) +
XME
%max$( = 64" 44 + 8!0(0!2 + 0!028(28$1)) = 27!9 ft%max = 27!9(62!4) = 1' 739 psfg = 12.1 psig
925
PROBLEM 10.79
Situation: Gasoline being pumped from a gas tank is described in the problem state-ment.
Find: Pump power.
Properties: From Fig. A.2 6 = 0!68' : = 5!5× 10"6 ft2/sec.
ANALYSIS
] = 0!12 gpm = 2!68× 10"4 cfsA1 = (1$4)(1$12) = 0!0208 ft
A2 = (1$32)(1$12) = 0!0026 ft
A2$A1 = (1$32)$(1$4) = 0!125
( = 62!4(0!68) = 42!4 lbf/ft3
,1 = ]$I = 2!68× 10"4$(0$4(1$48)2) = 0!786 ft/s, 21 $2) = 0!00959 ft
,2 = (32$4)2 × 0!786 = 50!3 ft/s, 22 $2) = 39!3 ft
Re1 = ,111$:
= 0!786(0!0208)$(5!5× 10"6)= 2' 972
From Fig. 10.8 b % 0!040
%1 = 14!7 psia
R2 " R1 = 2 ft
%2 = 14!0 psia
ME = (b2$1 + 5<0),21 $2)
= (0!040× 10$0!0208 + 5× 0!21)0!00959 = 0!194 ftM, = (%2 " %1)$( + R2 " R1 + , 22 $2) + ME
= (14!0" 14!7)144$42!4 + 2 + 39!3 + 0!194 = 39!1 ft
Power equation
* = (M,]$(550=) = 42!4(39!1)0!000268$(550× 0!8)
= 10.1×10"4 hp
926
PROBLEM 10.80
Situation: A partially-closed valve is described in the problem statement.from Table 10.2 c& = 0!046 mm
Find: Loss coe"cient for valve.
APPROACH
First nd ] for valve wide open. Assume valve is a gate valve.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 +
XME
2 = 0 + 0 + 0 + (, 2$2))(0!5 + 0!9 + 0!2 + 0!9 + 1 + b2$1)
, 2 = 4)$(3!5 + b2$1)
Assume b = 0!015! Then
, = [4× 9!81$(3!5 + 0!015× 14$0!1)]1*2 = 2!65 m/sc&$1 ' 0!0005
Re = 2!65× 0!10$(1!3× 10"6) = 2!0× 105
From Fig. 10.8 b = 0!019! Then
, = [4× 9!81$(3!5 + 0!019× 14$0!10)]1*2 = 2!52 m/sRe = 2!0× 105 × 2!52$2!65 = 1!9× 105; O.K.
This is close to 2.0×105 so no further iterations are necessary. For one-half thedischarge
, = 1!26 m/s
Re = 9!5× 104
and from Fig. 10.8 b = 0!021! So
, 2 = 1!588 = 4× 9!81$(3!3 +<@ + 0!021× 14$0!1)3!3 +<@ + 2!94 = 24!7
<@ = 18!5
927
PROBLEM 10.81
Situation: A water main is described in the problem statement.
Find: The pipe size.
Properties: From Table 10.2 c& = 0!15 mm. Table A.5 (water at 10 !C): ( =9810N$m3' : = 1!31× 10"6m2$ s!
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 + M(
(300' 000$9' 810) + 0 = (60' 000$9' 810) + 10 + M(
M( = 14!46 m
b(2$1)(]2$I2)$2) = 14!46
b(2$1)[]2$((0$4)12)2$2)] = 14!46
(42b2]2$02)$2)15 = 14!46
1 = [(8$14!46)b2]2$(02))]1*5
Assume b = 0!020! Then
1 = [(8$14!46)× 0!02× 140× (0!025)2$(02 × 9!81)]1*5
= 0!1027 m
Relative roughness
c&1
=0!15
103= 0!00146
Reynolds number
Re =4]
01:
=4× (0!025m3$ s)
0 × (0!1027m)× (1!31× 10"6m2$ s)= 2!266× 105
Friction factor (b) (Swamee-Jain correlation)
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
hlog10
³400146347
+ 5474(24266×105)049
´i2
= 2! 271 7× 10"2
928
Recalculate pipe diameter
1 = 0!1027× (0!0227$0!020)1*5
= 0!105 m
Specify a 12-cm pipe
929
PROBLEM 10.82
Situation: A two reservoir system is described in the problem statement.
Find: The discharge.
Properties: From Table 10.3 <02 = 0!35; <02 = 0!16; <1 = 0!39' <G = 0!5 and<W = 1!0!From Table A.5 : = 1!22× 10"5 ft2$s.From Table 10.2 c& = 1!5× 10"4 ft.
ANALYSIS
Energy equation
%1$( + R1 + ,21 $2) = %2$( + R2 + ,
22 $2) +
XME
11 =X
ME = (,21 $2))(<G + 3<01 + b1 × 50$1)
+(, 22 $2))(<1 + 2<02 +<W + b2 × 30$(1$2))
Assume b1 = 0!015; b2 = 0!016
11× 2) = , 21 (0!5 + 3× 0!35 + 0!015(50)) + ,22 (0!39 + 2× 0!16 + 1!0 + 0!016(60))
708 = , 21 (2!3) + ,22 (2!67) = ]
2(2!3$((0$4)2(1)4) + 2!67$((0$4)2(1$2)4)) = 73!0]2
]2 = 708$73!0 = 9!70
] = 3!11 cfs
Re = 4]$(01:)
Re1 = 4(3!11)$(0(1!22× 10"5)) = 3!2× 105
c&$11 = 1!5× 10"4$1 = 0!00015Re2 = 6!5 105; c&$12 = 0!0003
From Fig. 10.8 b1 = 0!016 and b2 = 0!016! No further iterations are necessary so
] = 3!11 cfs
930
PROBLEM 10.83
Situation: A steel pipe is described in the problem statement.from Table A.5 : = 1!31× 10"6 m2$sprovided in problem statement
Find: (a) Discharge and(b) Pressure at point A.
ANALYSIS
Energy equation
%1$( + R1 + ,21 $2) = %2$( + R2 + ,
22 $2) +
XME
0 + 12 + 0 = 0 + 0 + (, 2$2))(1 +<G +<@ + 4<0 + b × 2$1)
Using a pipe diameter of 10 cm and assuming b = 0!025
24) = , 2(1 + 0!5 + 10 + 4(0!9) + 0!025× 1' 000$(0!10)), 2 = 24)$265!1 = 0!888 m2/s2
, = 0!942 m/s
] = , I
= 0!942(0$4)(0!10)2
= 0.0074 m3/s
Re = 0!942× 0!1$1!31× 10"6 = 7× 104
From Fig. 10.8 b % 0!025
%=$( + R= + ,2$2) = %2$( + R2 + ,
2$2) +X
ME
%=$( + 15 = , 2$2)(2<0 + b × 2$1)%=$( = (0!888$2))(2× 0!9 + 0!025× 500$0!1)" 15 = "9!26 m%= = 9810× ("9!26)
= -90.8 kPa
Note that this is not a good installation because the pressure at I is near cavitationlevel.
931
PROBLEM 10.84
Situation: Air ows through a horizontal, rectangular, air-conditioning ductDuct length is 2 = 20m. Section area is 4 by 10 inches (102 by 254 mm).Air speed is , =10 m/s! Sand roughness height for the duct material is c& =0!004mm!
Find: (a) The pressure drop in inches of water.(b) The power in watts needed to overcome head loss.
Properties: Air at 20 !C from Table A.3: # = 1!2 kg$m3, ( = 11!8N$m3. : =15!1× 10"6m2$ s!
Assumptions: 1.) Neglect all head loss associated with minor losses.2.) Assume T1 = T2, where T is the kinetic energy correction factor and sections 1and 2 correspond to the duct inlet and outlet, respectively.
APPROACH
To account for the rectangular section, use hydraulic diameter. Calculate Reynoldsnumber and then choose a suitable correlation for the friction factor (b) ! Apply theDarcy-Weisbach equation to nd the head loss (M(). Apply the energy equation tond the pressure drop, and calculate power using * = /)M( !
ANALYSIS
Hydraulic diameter (16) (four times the hydraulic radius)
16 =4I
*
=4 (0!102m) (0!254m)
(0!102m + 0!102m + 0!254m + 0!254m)= 0!1456m
Reynolds number
Re =, 16:
=(10m$ s) (0!1456m)
(15!1× 10"6m2$ s)= 96' 390
Friction factor (b) (Swamee-Jain correlation)
b =0!25
hlog10
³[-
34795+ 5474
Re049
´i2
=0!25
hlog10
³4×10"6m
347×(041456m) +5474
96I390049
´i2
= 0!0182
932
Darcy-Weisbach equation
M( = b2
1
, 2
2)
= 0!0182
µ20m
0!1456m
¶µ102m2$ s2
2× 9!81m$ s2
¶
= 12!72m
Energy equation (section 1 and 2 are the inlet and exit of the duct)
µ%
(
¶
1
=
µ%
(
¶
2
+ ME
Thus
!% = (airM(
=¡11!8N$m3
¢(12!72m)
= 150Pa
= 150Pa
µ1!0 in!-H2O248!8Pa
¶
!% = 0!6 in!-H2O
Power equation
* = (]M(
= !%I,
= (150Pa) (0!102m× 0!254m) (10m$ s)* = 38!9W
COMMENTS
The power to overcome head loss is small (39W)–this is equivalent to the powerrequired to light a small light bulb.
933
PROBLEM 10.85
Situation: An electrostatic air lter is being tested.
Pressure drop is !% =3 in.-H20. Air speed is , = 10m$ s!
Find: The minor loss coe"cient (<) for the lter.
Properties: Air @ 20 !C from Table A.3: # = 1!2 kg$m3, ( = 11!8N$m3. : =15!1× 10"6m2$ s!
APPROACH
Apply the energy equation to relate the pressure drop to head loss. Then, nd theminor loss coe"cient using ME = <, 2$2)!
ANALYSIS
Energy equation (select a control volume surrounding the lter)
µ%
(
¶
1
=
µ%
(
¶
2
+ ME
Thus
ME =!%
(air
=(3 in.-H2O)
³249!2 Pa
in.-H2O
´
11!8N$m3
= 63!36m
Head loss
ME =<, 2
2)
< =2)ME, 2
(1)
=2 (9!81m$ s2) (63!36m)
(10m$ s)2
= 12!43
< = 12!4 (2)
934
COMMENTS
1.) This minor loss coe"cient is larger than the coe"cient for any components listedin Table 10.3.2.) Combining Eqs. (1) and (2) gives < = !%$(#, 2$2)! Thus, the pressure drop forthe lter is about 12 times larger that the pressure change that results when the owis brought to rest.
935
PROBLEM 10.86
Situation: A system with two tanks is described in the problem statement.
Find: The pump power.
Properties: From Table 10.3 <G = 0!03;<0 = 0!35;<W = 1!0!From Table A.5 : = 10"6 m2$s.From Table 10.2 c& = 0!046 mm.
APPROACH
Apply the energy equation from the water surface in the lower reservoir to the watersurface in the upper reservoir.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 + M, = %2$( + ,
22 $2) + R2 +
XME
0 + 0 + 200 m+ M, = 0 + 0 + 235 m + (, 2$2))(<G +<0 +<W + b2$1)
Flow rate equation
, = ]$I
= 0!314$((0$4)× 0!32)= 4!44 m/s
, 2$2) = 1!01 m
Reynolds number
Re = , 1$:
= 4!44× 0!3$10"6
= 1!33× 106
c&$1 % 0!00015
Resistance coe"cient (from the Moody diagram, Fig. 10.8)
b = 0!00014
So
b2$1 = 0!014× 140$0!3 = 6!53M, = 235" 200 + 1!01(0!03 + 0!35 + 1 + 6!53)
= 43!0 m
Power equation
* = ](M,
= 0!314× 9' 790× 43!0= 132 kW
936
PROBLEM 10.87
Situation: A two-tank system with the pump from Fig. 10.16 is described in theproblem statement.
Find: Discharge.
APPROACH
Same solution procedure applies as in Prob. 10.85.
ANALYSIS
From the solution to Prob. 10.85, we have
M, = 35 + 8!38,2$2)
M, = 35 + 8!38[(]$((0$4)× 0!32)2$2)] = 35 + 85!6]2
System data computed and shown below:
](m3s) $ 0.05 0.10 0.15 0.20 .30M,(m) $ 35.2 35.8 36.9 38.4 42.7
Then, plotting the system curve on the pump performance curve of Fig.10-16 yieldsthe operating point
] = 0!25 m3$s
937
PROBLEM 10.88
Situation: A system with an injector pipe is described in the problem statement.
Find: If the system will operate as a pump.
ANALYSIS
For the system to operate as a pump, the increase in head produced by the jet must begreater than 9 ft (the di!erence in elevation between the lower and upper reservoir).Consider the head change between a section just to the right of the jet and far to theright of it with zero ow in the lower pipe. Determine this head change by applyingthe momentum equation.
1 2
x
,1 = 60 ft/s
] = ,1I1 = 2!94 cfs
,2 = ]$I2 = (60)(0$4)(32)$((0$4)(122))
,2 = 60(32$122) = 3!75 ft/sXH$ = /!,! " /#,#
%1I1 " %2I2 = (3!75)(1!94)(3!75× (0$4)(12))" (60)(1!94)(60× (0$4)(1$4)2)I(%1 " %2) = 1!94("176!7 + 11!04)%2 " %1 = 321 psf
M2 " M1 = (321 lbf/ft2)$(62!4 lbf/ft3) = 5!15 ft
The change in head of 5.15 ft is not enough to overcome the static head of 9.0 ft.;therefore, the system will not act as a pump.
938
PROBLEM 10.89
Situation: A pump is described in the problem statement.
Find: Discharge.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 + M, = %2$( + ,
22 $2) + R2 +
XME
0 + 0 + 10 + M, = 0 + 0 + 20 + , 22 $2)(<G + b2$1 + c0)
M, = 10 + (]2$(2)I2))(0!1 + 0!02× 1' 000$(10$12) + 1)I = (0$4)× (10$12)2 = 0!545 ft2
M, = 10 + 1!31]2cfs1 cfs = 449 gpm
M, = 10 + 1!31]2gpm$(449)2
M, = 10 + 6!51× 10"6]2gpm
]$ 1,000 2,000 3,000M$ 16.5 36.0 68.6
Plotting this on pump curve gure yields ] % 2' 950 gpm
939
PROBLEM 10.90
Situation: A pump is described in the problem statement.
Find: Pumping rate.
ANALYSIS
M, = 20 ft - 10 ft = 10 ftThen from the pump curve for 10.89 one nds ] = 4' 700 gpm.
940
PROBLEM 10.91
Situation: Water pumping from a reservoir is described in the problem statement.
Find: Pump power.
Properties: From Table 10.2 c& = 0!046 mm.
Assumptions: From Table A.5 : = 1!31× 10"6 mm.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 + M, = %2$( + ,
22 $2) + R2 +
XME
0 + 0 + 100 + M, = 0 + , 22 $2) + 140 + ,22 $2)(0!03 + b2$1)
Flow rate
,2 = ]$I,
= 25$((0$4)× 1!52)= 14!15 m/s
Reynolds number
Re =, 1
:
=14!15× 1!51!31× 10"6
= 1!620× 107c&1
=0!046
1500= 0!00003
Friction factor (Moody Diagram) or the Swamee-Jain correlation:
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
hlog10
³0400003347
+ 5474(14620×107)049
´i2
= 0!009995
% 0!01
Then
M, = 140" 100 +, 222)
µ1!03 + 0!010×
300
1!5
¶
= 140" 100 +14!152
2× 9!81
µ1!03 + 0!010×
300
1!5
¶
M, = 70!92m
941
Power equation
* = ](M,
=¡25m3$ s
¢×¡9810N$m3
¢× (70!92m)
= 17.4 MW
942
PROBLEM 10.92
Situation: Two pipes and their reservoirs are described in the problem statement.
Find: Di!erence in water surface between two reservoirs.
Assumptions: & = 20oC so : = 10"6 ft2/s .
ANALYSIS
c&$115 = 0!1$150 = 0!00067
c&$130 = 0!1$300 = 0!00033
,15 = ]$I15 = 0!1$((0$4)× 0!152) = 5!659 m/s,30 = 1!415 m/s
Re15 = , 1$: = 5!659× 0!15$10"6 = 8!49× 105
Re30 = 1!415× 0!3$10"6 = 4!24× 105
Resistance Coe"cient (from the Moody diagram, Fig. 10-8)
b15 = 0!0185
b30 = 0!0165
Energy equation
R1 " R2 =X
ME
R1 " R2 = (, 215$2))(0!5 + 0!0185× 50$0!15)+(, 230$2))(1 + 0!0165× 160$0!30) + (,15 " ,30)
2$2)
R1 " R2 = (5!6592$(2× 9!81))(6!67)+((1!4152$(2× 9!81))(9!80) + (5!659" 1!415)2$(2× 9!81)
R1 " R2 = 1!632(6!67) + 1!00 + 0!918 = 12.80 m
943
PROBLEM 10.93
Situation: Two pipes and their reservoirs are described in the problem statement.
Find: Di!erence in water surface elevation between two reservoirs.
Properties: From Table 10.3 <G = 0!5 and <W = 1.0.
Assumptions: & = 68!H so : = 1!1× 10"5 ft2/s.
APPROACH
Apply the energy equation from the water surface in the tank at the left to the watersurface in the tank on the right.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 +
XME
R1 = R2 + (<G + b121$11),21 $2) + (,1 " ,2)
2$2) + ((b222$12) +<W),22 $2)
Calculate velocities and Reynolds number
,1 = ]$I1 = ]$((0$4)(1$2)2) = 25!48 ft/s
Re1 = 25!48× (1$2)$1!1× 10"5) = 1!16× 106
, 21 $2) = 10!1 ft
,2 = ,1$4 = 6!37 ft/s
Re2 = 6!37× 1$1!1× 10"5 = 5!8× 106
, 22 $2) = 0!630
c&$11 = 4× 10"4$0!5 = 8× 10"4
c&$12 = 4× 10"4
From Fig. 10.8 b1 = 0!019 and b2 = 0!016
R1 " R2 = M = (0!5 + !019× 150$(1$2))10!1 + (25!48" 6!37)2$64!4+((0!016× 500$1) + 1)0!630
= 62!6 + 5!7 + 5!7
= 74.0 ft
944
PROBLEM 10.94
Situation: Oil owing through a pipe is described in the problem statement.
Find: Discharge of oil.
Properties: From Table 10.3 <G = 0!50;<@ = 5!6!From Table 10.2 c& = 1!5× 10"4 ft.
APPROACH
Apply the energy equation from reservoir water surface to pipe outlet.
ANALYSIS
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 +
XME
0 + 0 + 100 ft = 0 + , 22 $2) + 64 + (,2$2))(<G +<@ + b2$1)
Assume b = 0!015 for rst trial. Then
(, 2$2))(0!5 + 5!6 + 1 + 0!015× 300$1) = 36, = 14!1 ft/s
Re = , 1$: = 14!1× 1$10"4 = 1!4× 105
c&$1 = 0!00015
From Fig. 10.8 b % 0!0175!Second Trial:
, = 13!7 ft/s
Re = 1!37× 105
From Fig. 10.8 b = 0!0175!so
] = , I
= 13!7× (0$4)× 12
= 10.8 ft3/s
EGLHGL
945
PROBLEM 10.95
Situation: A system with a reservoir and a smooth pipe is described in the problemstatement.
Find: (a) Pump horsepower.(b) Pressure at midpoint of long pipe.
Properties: From Table 10.3 <0 = 0!19!From Table A.5 : = 1!22× 10"5 ft2$s.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 + M, = %2$( + ,
22 $2) + R2 +
XME
0 + 30 + 0 + M, = 0 + 60 + (,2$2))(1 + 0!5 + 4<0 + b2$1)
, = ]$I = 2!0$((0$4)× (1$2)2) = 10!18 ft/sec, 2$2) = 1!611 ft
Re = 4]$(01:) = 4× 2$(0 × (1$2)× 1!22× 10"5)= 4!17× 105
From Table 10.8 b = 0!0135 so
M, = 30 + 1!611(1 + 0!5 + 4× 0!19 + 0!0135× 1' 700$(1$2)) = 107!6 ft* = ](M,$550
= 24.4 horsepower
Pressure at midpoint of long pipe
%"$( + R" = R2 + ME
%" = ([(R2 " R") + ME]%" = 62!4[(60" 35) + 0!0135× (600$0!5)× 1!611]
%" = 3' 189 psf = 22.1 psig
EGL
HGL
HGL
EGL
946
PROBLEM 10.96
Situation: A pump system is described in the problem statement.
Find: Pump power.
Properties: From Table 10.2 c& = 0!046 mm.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 + M, = %2$( + ,
22 $2) + R2 +
XME
0 + 0 + 20 + M, = 0 + 0 + 40 + , 2$2)(<G + 2<0 +<0 + b2$1)
M, = 20 + , 2$2)(0!5 + 2× 0!19 + 1 + b2$1), = ]$I = 1!2$((0$4× 0!62) = 4!25 m/s
, 2$2) = 0!921 m
Re = , 1$: = 4!25× 0!6$(5× 10"5) = 5!1× 104
c&$1 = 0!00008
Resistance coe"cient (from Moody diagram, Fig. 10.8)
b = 0!021
SoM, = 20 + 0!921(0!5 + 0!38 + 1 + 6!65) = 27!9 m
Power equation
* =](M,g
=1!2× 0!94× 9810× 27!9
0!80
= 386 kW
947
PROBLEM 10.97
Situation: A system with an upstream reservoir is described in the problem statement.
Find: Elevation of water surface in upstream reservoir.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 +
XME
0 + 0 + R1 = 0 + 0 + 12 + (, 230$2))(0!5 + b2$1) + (,215$2))(<1 + b(2$1) + 1!0)(8)
,30 = ]$I30 = 0!15$((0$4)× 0!302) = 2!12 m/s, 230$2) = 0!229 m (9)
,15 = 4,30 = 8!488 m/s
, 215$2) = 3!67 m
12$11 = 15$30 = 0!5$ <) = 0!37
Then
R1 = 12 + 0!229[0!5 + 0!02× (20$0!3)] + 3!67[0!37 + 0!02(10$0!15) + 1!0]R1 = 22!3 m
H.G.L.
E.G.L.
E.G.L.H.G.L.
V /2g2
p/g
z0
A
A
948
PROBLEM 10.98
Situation: A tank with piping system is described in the problem statement.
Find: (a) Sketch the EGL and HGL.(b) Where cavitation might occur.
ANALYSIS
H.G.L.E.G.L.
Cavitation could occur in the venturi throat section or just downstream of the abruptcontraction (where there will be a contraction of the ow area).
949
PROBLEM 10.99
Situation: A system with a steel pipe is described in the problem statement.
Find: Pressure at point A.
Properties: From Table 10.3 <0 = 0!9' <@ = 10!From Table 10.2 c& = 5× 10"4 ft.From Table A.5 : = 1!41× 10"5 ft2$s.
ANALYSIS
Energy equation
%=$( + ,2=$2) + R= = %2$( + R2 + ,
22 $2) +
XME
%=$( + 20 + 0 = 0 + 90 + 0 + , 2$2)(0!5 + 2<0 +<@ + b(2$1) + 1)
, = ]$I = (50$449)$((0$4)(2$12)2) = 5!1
, 2$2) = 5!12$64!4 = 0!404
Re = 5!1(2$12)$(1!41× 10"5) = 6× 104
c&$1 = 5× 10"4 × 12$2 = 0!003
Resistance coe"cient (from Moody diagram, Fig. 10.8)
b = 0!028
Energy equation becomes
%= = ([70 + 0!404(0!5 + 2× 0!9 + 10 + (0!028× 240$(2$12)) + 1!0)]= 62!4× 91!7 = 5722 psfg = 39.7 psig
950
PROBLEM 10.100
Situation: A system with two reservoirs is described in the problem statement.
Find: Water surface elevation in reservoir I!
Properties: (a) From Table 10.2 c& = 0!26 mm. (b) From Table A.5 : = 1!3 × 10"6m2$s.
ANALYSIS
c&$120 = 0!26$200 = 0!0013
c&$115 = 0!0017
,20 = ]$I20 = 0!03$((0$4)× 0!202) = 0!955 m/s]$I15 = 1!697 m/s
Re20 = , 1$: = 0!955× 0!2$(1!3× 10"6) = 1!5× 105
Re15 = 1!697× 0!15$1!3× 10"6 = 1!9× 105
From Fig. 10-8: b20 = 0!022; b15 = 0!024
R1 = R2 +X
ME
R1 = 110 + , 220$2)(0!5 + 0!022× 100$0!2 + 0!19)+, 215$2)[(0!024× 150$0!15)+1!0 + 0!19)]
= 110 + 0!0465(11!7) + 0!1468(25!19)
= 110 + 0!535 + 3!70 = 114.2 m
951
PROBLEM 10.101
Situation: A pipe system must supply water ow from an elevated tank to thereservoir—additional details are provided in the problem statement.
Find: Design the pipe system.
ANALYSIS
One possible design given below:
2 % 300 + 50 + 50 = 400 m; <0 = 0!19
50 =X
ME = ,2$2)(<G + 2<0 + b(2$1) + 1!0) = ,
2$2)(1!88 + b(2$1))
50 = []2$(2)I2)](b(2$1) + 1!88) = [2!52$(2× 9!81×I2)]((400 b$1) + 1!88)
Assume b = 0!015! Then
50 = [0!318$((0$4)2 ×14)](0!015× (400$1)) + 1!88)
Solving, one gets1 % 0!59m = 59 cm
Try commercial size 1 = 60 cm. Then
,60 = 2!5$((0$4)× 0!62) = 8!84 m/sRe = 8!8× 0!6$10"6 = 5!3× 106; c&$1 = 0!0001 and b % 0!013
Since b = 0!13 is less than originally assumed b , the design is conservative. So use1 = 60 cm and 2 % 400 m.
60 cm steel pipe
952
PROBLEM 10.102
Situation: A pipe system must supply water ow from an elevated tank to thereservoir—additional details are provided in the problem statement.
Find: Design the system.
Assumptions: Steel pipe will be used.
APPROACH
First write the energy equation from the reservoir to the tank and assume that thesame pipe conguration as used in the solution to P10-99 is used. Also a pump, twoopen gate valves, and two bends will be in the pipe system.
ANALYSIS
Assume 2 % 400 ft.
%1$( + ,21 $2) + R1 + M, = %2$( + ,
22 $2) + R2 +
XME
0 + 0 + 450 + M, = 0 + 0 + 500
+(, 2$2))(<G + 2<0 + 2<@ +<W + b2$1)
Assume , % 2 m/s; I = ]$, = 1!0$2 = 0!50 m2
I = (0$4)12 = 0!50 or 1 = !799 m Choose a pipe size of 0.80 m
Then
, = ]$I = 1!0$((0$4)× 0!82) = 1!99 m/s and , 2$2) = 0!202 mc&$1 = 0!00006; Re = , 1$: = 1!6$10"6 = 1!6× 106
Then b = 0!012 (from Fig. 10-8)
M, = 50 + (, 2$2))(0!5 + 2× 0!2 + 2× 0!19 + 1!0 + 0!012× 400$1)= 50 + 1!43 = 51!43 m
* = ](M, = 2!0× 9' 810× 51!43= 1!01 MW
Design will include 0.80 m steel pipe and a pump with output of 1.01 MW
COMMENTS
An innite number of other designs are possible. Also, a design solution wouldinclude the economics of the problem to achieve the desired result at minimum cost.
953
PROBLEM 10.103
Situation: Design lab equipment to illustrate cavitation.Use a venturi nozzle to create the low pressure.Assume a water source with a pressure of % = 50 psig.
Find: Specify the components, the primary dimensions and parameters (ow rates)
ANALYSIS
There are many possible design solutions. The venturi nozzle should be fabricatedfrom clear material so that cavitation can be observed.
954
PROBLEM 10.104
Situation: The guidelines for an experiment to verify the momentum principle aredescribed in the problem statement.
Find: Design the equipment and the experimental procedure.
APPROACH
Because you want to design equipment to illustrate cavitation, it would be desirableto make the ow restriction device from clear plastic so that one may observe theformation of cavitation bubbles. The design calculation for pressure and dischargewould be the same as given for 10.71.
ANALYSIS
Equipment for the momentum experiment is shown below:
Counter Wgt
Pivot point VaneScops
Weight
Necessary measurements and calculations:
a) Discharge. This could be done by using a scale and tank to weigh the ow ofwater that has occurred over a given period of time.
b) The velocity in the jet could be measured by means of a stagnation tube or solvingfor the velocity by using Bernoulli’s equation given the pressure in the nozzlefrom which the jet issues.
c) Initially set the counter balance so that the beam is in its horizontal equilibriumposition. By opening a valve establish the jet of water. Apply necessaryweight at the end of the beam balance to bring the beam back to horizontalequilibrium. By calculation (using moment summation) determine the forcethat the jet is exerting on the vane. Compare this force with the calculatedforce from the momentum equation (using measured ]' , , and vane angle).
955
PROBLEM 10.105
Situation: A pipe system is described in the problem statement.
Find: Ratio of discharge in line D to that in line I.
ANALYSIS
ME= = ME>
0!2, 2=$2) = 10, 2>$2) (1)
,= =&50,>
]>$]= = ,>I>$,=I=
= ,>I>$,=((1$2)I>) (2)
]>$]= = 2,>$,=
Solve Eqs. (1) and (2) for ]>$]=:
]>$]= = 2× ,>$&50,>
= 0.283
956
PROBLEM 10.106
Situation: Divided ow is described in the problem statement.
Find: Ratio of velocity in line I to D!
ANALYSIS
Globe valve wide openB
AGate valve half open
XME> =
XME=
MEIglobe + 2MEIelbow = MEIgate + 2MEIelbow
10, 2>$2) + 2(0!9,2>$2)) = 5!6, 2=$2) + 2(0!9,
2=$2))
11!8, 2>$2) = 7!4, 2=$2)
,=$,> = 1!26
957
PROBLEM 10.107
Situation: A parallel piping system is described in the problem statement.
Find: Division of ow of water.
ANALYSIS
,1$,2 = [(b2$b1)(22$21)(11$12)]1*2
Initially assume b1 = b2Then
,1$,2 = [(1' 500$1' 000)(0!50$0!40)]1*2
= 1!369
,1 = 1!37,2
1!2 = ,1I1 + ,2I2
1!2 = 1!37,2 × (0$4)× 0!52 + ,2 × (0$4)× 0!42
,2 = 3!04 m/s
Then ,1 = 1!37× 3!04 = 4.16 m/s
]1 = ,1I1
= 4!16(0$4)× 0!52
= 0.816 m3/s
]2 = 0.382 m3/s
958
PROBLEM 10.108
Situation: A parallel piping system is described in the problem statement.
Find: Discharge in pipe 1.
ANALYSIS
M(I1 = M(I2
b(2$1)(, 21 $2)) = b(42$1)(, 22 $2))
, 21 = 4, 22,1 = 2,2
Thus
]1 = 2]2
= 2 cfs
959
PROBLEM 10.109
Situation: A parallel piping system is described in the problem statement.
Find: The pipe having the greatest velocity.
ANALYSIS
M,I= = M(I> = M(I)
b(2$1)(, 2$2))= = b(2$1)(, 2$2))> = b(2$1)(,2$2)))
0!012(6' 000$1!5), 2= = 0!02(2' 000$!5), 2> = !015(5' 000),2)
48, 2= = 80, 2> = 75,2)
Therefore, ,= will have the greatest velocity. Correct choice is a).
960
PROBLEM 10.110
Situation: A parallel piping system is described in the problem statement.
Find: Ratio of discharges in two pipes.
ANALYSIS
(,1$,2) = [(b2$b1)(22$21)(11$12)]1*2
Let pipe 1 be large pipe and pipe 2 be smaller pipe. Then
(,1$,2) = [(0!014$0!01)(2$32)(21$1)]1*2 = 0!966
(]1$]2) = (,1$,2)(I1$I2) = 0!966× (21$1)2 = 3!86(]large$]small) = 3.86
961
PROBLEM 10.111
Situation: A parallel piping system is described in the problem statement.
Find: (a) Division of ow.(b) Head loss.
ANALYSIS
]18 +]12 = 14 cfs
ME18 = ME12b18(218$118)(,
218$2)) = b12(212$112)(,
212$2))
b18 = 0!018 = b12
so
218]218$1
518 = 212]
212$1
512
]218 = (118$112)5(212$218)]
212
= (18$12)5(2' 000$6' 000)]212= 2!53]212
]18 = 1!59]12
1!59]12 +]12 = 14
2!59]12 = 14
Q12 = 5.4 cfs
]18 = 1!59]12
= 1!59(5!4)
= 8.6 cfs
,12 = 5!4$((0$4(1)2) = 6!88
,18 = 8!6$((0$4)(18$12)2) = 4!87
ME12 = 0!018((2' 000)$1)(6!88)2$64!4 = 26!5
ME18 = 0!018(6' 000$1!5)(4!872$64!4) = 26!5
Thus' ME#"$ = 26.5 ft
962
PROBLEM 10.112
Situation: A parallel piping system is described in the problem statement.
Find: (a) Division of ow.(b) Head loss.
ANALYSIS
] = ]14 +]12 +]16
25 = ,14 × (0$4)× (14$12)2 + ,12 × (0$4)× 12 + ,16 × (0$4)× (16$12)2; (1)
Also, M(14 = M(12 = M(16 and assuming b = 0!03 for all pipes
(3000$14), 214 = (2000$12),212 = (3000$16),
216 (2)
, 214 = 0!778,212 = 0!875,
216
From Eq(1)
25 = 1!069,14 + 0!890,14 + 1!49,14
,14 = 7!25 ft/s
and ,12 = 8!22, ,14 = 7!25 ft/s; ,16 = 7!25 ft/s
]12 = 6.45 ft3/s
]14 = 7.75 ft3/s
]16 = 10.8 ft3/s
,24 = ]$I24 = 25$(0$4× 22) = 7!96 ft/s;,30 = 5!09 ft/s
MEAB = (0!03$64!4)[(2' 000$2!00)(7!96)2 + (2' 000$1)× (8!21)2
+(3' 000$(30$12)× (5!09)2] = 106.8 ft
963
PROBLEM 10.113
Situation: A parallel piping system is described in the problem statement.
Find: (a) Division of ow between pipes.(b) Head loss.
Properties: From Table 10.2 c& = 0!046 mm.
ANALYSIS
Call pipe A-B pipe and pipe ACB pipe 2. Then
M(I1 + M, = M(I2
c&$1 = 0!046$500 ' 0!0001
Assume b1 = b2 = 0!013 (guess from Fig. 10-8)
b(21$11)(,21 $2)) + M, = b(22$12)(,
22 $2))
0!013(2' 000$0!5)(, 21 $2)) + M, = 0!013(6' 000$0!5)(, 22 $2))
2!65, 21 + M, = 7!951, 22 (1)
Continuity principle
(,1 + ,2)I = 0!60 m3/s
,1 + ,2 = 0!60$I = 0!6$((0$4)(0!52)) = 3!0558
,1 = 3!0558" ,2 (2)
By iteration (Eqs. (1), (2) and pump curve) one can solve for the division of ow:
]1 = 0.27 m3/s
]2 = 0.33 m3/s
Head loss determined along pipe 1
ME = b(2$1)(, 21 $2))
,1 = ]1$I = 0!27$((0$4)(0!52)) = 1!38 m/s
M2 = 0!013(2000$0!5)(1!382$(2× 9!81))= 5.05 m
964
PROBLEM 10.114
Situation: A parallel piping system is described in the problem statement.
Find: Discharge through pump and bypass line.
ANALYSIS
21
Valve
Pump
], = ]@ + 0!2
(%2 " %1)$( = M,
I = (0$4)(0!12)
= 0!00785 m2
<@,2@ $2) = <@]
2@$(2)I
2) = M,
M, = 100" 100(]@ + 0!2)(0!2)(]2@)$(2× 9!81× (0!00785)
2) = 100" 100]@ " 20165]2@ + 100]@ " 80 = 0
Solve by quadratic formula
]@ = 0.456 m3/s
], = 0!456 + 0!2
= 0.656 m3/s
965
PROBLEM 10.115
Situation: Air and water ow are described in the problem statement.
Find: The relation of the two hydraulic radii.
ANALYSIS
"7 = I$*
"7I= = (I$* )= = 16$16 = 1
"7IM = (I$* )M = 8$8 = 1
! "7I= = "7IM
The correct choice is (a).
966
PROBLEM 10.116
Situation: Air owing through a horizontal duct is described in the problem state-ment.
Find: Pressure drop over 100 ft length.
Properties: From Table A.3 : = 1!58× 10"4 ft2$s and # = 0!00237 slug/ft3!From Table 10.2 c& = 0!0005 ft.
ANALYSIS
M = (6 in)(cos 30!) = 5!20
I = (6)(5!20)$2 = 15!6 in2 = 0!108 ft2
"7 = I$* = 15!6 in2$(3× 6) = 0!867 in.4"7 = 3!47 in. = 0!289 ft.
c&$4"7 = 0!0005/0!289. = 0.00173
Re = (, )(4"7)$: = (12)(0!289)$(1!58× 10"4) = 2!2× 104
From Fig. 10.8 b = 0!030 so the pressure drop is
!%( = (b(2$4"7)(#,2$2)
!%( = 0!030(100$0!289)(0!00237× 122$2)
!%( = 1!77 lbf/ft2
967
PROBLEM 10.117
Situation: Uniform ow of water in two channels is described in the problem state-ment.
Find: Relate ow rates of two channels.
ANALYSIS
] = (1!49$Q)I"2*37 61*2
]=$]> = "2*37I=$"
2*37I> = ("7I=$"7I>)
2*3
where "7I= = 50$20 = 2!5; "7I> = 50$(3× 7!07) = 2!36"7I= F "7I>
! ]= F ]>
The correct choice is (c).
968
PROBLEM 10.118
Situation: A cold-air duct is described in the problem statement.
Find: Power loss in duct.
Properties: From Table A.3 : = 1!46× 10"5!From Table A.2 # = 1!22 kg/m3!
Assumptions: c& = !15 mm= 1!5× 10"4 m
ANALYSIS
Hydraulic radius
I = 0!15 m2
* = 2!30 m
" = I$* = 0!0652 m
4" = 0!261 m
Flow rate equation
, = ]$I
= 6$0!15
= 40 m/s
Reynolds number
Re = , × 4"$:= 40× 0!261$(1!46× 10"5)= 7!15× 105
Friction factor (b) (turbulent ow: Swamee-Jain equation)
b =0!25
£log10
¡[-3479
+ 5474Re049
¢¤2
=0!25
hlog10
³145×10"4347×04261 +
5474(7415×105)049
´i2
= 0!01797 % 0!018
Darcy Weisbach equation
M( = b(2$1)(, 2$2))
= 0!018× (100$0!261)(402$(2× 9!81))= 562!4 m
969
Power equation
*loss = ](M(
= 6× 1!22× 9!81× 562!4= 40.4 kW
970
PROBLEM 10.119
Situation: An air conditioning system is described in the problem statement.
Find: Ratio of velocity in trapezoidal to rectangular duct.
ANALYSIS
!Mrect = !Mtrap
! M(Irect = M(Itrap(b02$4"0),
20 $2) = (b'2$4"'),
2' $2)
"0 = I0$*0 = 2$6 = 0!333 ft
"' = I'$*' = 1!4$6 = 0!233 ft
, 2' $,20 = "'$"0 = 0!70
,trap$,rect = 0!84
971
PROBLEM 10.120
Situation: Water owing though a concrete duct is described in the problem state-ment.
Find: Estimate resistance coe"cient.
ANALYSIS
b = b(Re' c&$4")
" = I$* = 0!7 m2$3!4 m = 0.206 m
Re = , (4")$:
= 10× 4× !206× 106
= 8!2× 106
c&$4" = 10"3 m$0!824 m
= 1!2× 10"3
= !0012
From Fig. 10.8: b % 0!020 Choice (b) is the correct one.
972
PROBLEM 10.121
Situation: A wood ume is described in the problem statement.
Find: Discharge of water.
Assumptions: Q = 0!012
APPROACH
Apply Manning’s formula.
ANALYSIS
Manning’s formula
] = (1$Q)I"2*37 6
1*20
I = (1)(2)$2 = 1 m2
"7 = I$*
= 1$2(12 + 12)045 = 0!35 m
] = (1$0!012)(1)(0!35)2*3(0!0015)045
] = 1.60 m3/s
973
PROBLEM 10.122
Situation: A rock-bedded stream is described in the problem statement.
Find: Discharge.
Assumptions: c& = 30 cm.
ANALYSIS
From Fig. 10.8 b % 0!060
" = I$* % 2!21 mc&$4" = 0!034
from Fig. 10.8 b % 0!060
- =p8)$b
= 36!2 m1*2s"1
] = -I&"6
= 347 m3/s
974
PROBLEM 10.123
Situation: A concrete channel is described in the problem statement.
Find: Discharge.
Assumptions: c& = 10"3 m
ANALYSIS
I = 4!5 m2
* = 6 m
" = I$* = 0!75 m
c&$4" = 0!333× 10"3
From Fig. 10.8 b = 0!016
M($2 = b, 2$(2)4")
, =p(8)$b)"6 = 1!92 m/s
Re = 1!92× 3$(1!31× 10"6) = 4!4× 106 b = 0!015
From Fig. 10.8 b = 0!015Then
, = 1!92×p0!016$0!015 = 1!98 m/s
Finally,
] = 1!98× 4!5
= 8.91 m3/s
975
PROBLEM 10.124
Situation: A concrete channel is described in the problem statement.
Find: Discharge.
Assumptions: c& = 0!003
ANALYSIS
" = I$* = 4× 12$(12 + 2× 4) = 2!4c&$(4") = 0!003$(4× 2!4) = 0!00031
Reb1*2 = ((4")3*2$:)(2)6)1*2 × (2) × 5$8' 000)1*2
= 4!9× 105;
From Fig. 10.8 b = 0!015
, =p8)"6$b
=p8) × 2!4× 5$(0!015× 8' 000)
= 5!07
] = 5!07(4)12
= 243 cfs
Alternate solution:Assume Q = 0!015
] = (1!49$Q)I"2*361*2
= (1!49$0!015)4× 12(2!4)2*3 (5$8' 000)1*2
= 214 cfs
976
PROBLEM 10.125
Situation: Channels of rectangular cross section are described in the problem state-ment.
Find: Cross-sectional areas for various widths.
Assumptions: Q = 0!015
ANALYSIS
] = 100 cfs
6 = 0!001
] = (1!49$Q)I"046676045
or ]Q$(1!496045) = I"04667
31!84 = I"04667
31!84 = (>?)(>?$(>+ 2?))04667
For di!erent values of > one can compute ? and the area >?. The following tableresults
> (ft) ? (ft) I (ft2) ?$>2 16.5 33.0 8.24 6.0 24.0 1.56 3.8 22.5 0.638 2.8 22.4 0.3510 2.3 23.3 0.2315 1.7 25.5 0.11
Area (m2 )
22 23 24 25 260
1
2
Minimum area at y/b=0.5 (verified)
y/b
977
PROBLEM 10.126
Situation: Sewer partially lls a concrete pipe.The slope is 1 foot of drop per 1000 feet of length.Pipe diameter is 1 = 3 ft! Depth of sewer is ? = 1!5 ft!
Find: The discharge.
Assumptions: Assume that the properties of the sewer are those of clean water.Assume an Manning’s n-value of Q = 0!013!
APPROACH
Using Manning’s equation (traditional units).
ANALYSIS
Hydraulic radius
"7 =Ic*wet
=012$8
01$2=1
4
=3 ft
4= 0!75 ft
Flow area
I =012
8=0 (3 ft)2
8= 3! 534 ft2
Manning’s equation (traditional units)
] =1!49
QI"
2*37
p6!
=1!49
0!013× 3! 534× 0!752*3
r1 ft
1000 ft
= 10! 57 ft3$ s
] = 10! 6 ft3$ s
978
PROBLEM 10.127
Situation: A sewer pipe is described in the problem statement.
Find: The discharge.
Assumptions: Q = 0!012
ANALYSIS
] = (1!49$Q)I"046677 60450
2’ 2’
1.5’
2.5’
2.5’
!
cos K = 1!5 ft/2.5 ft
K = 53!13!
I = 032((360! " 2× 53!13!)$360) + 0!5× 4 ft× 1!5 ftI = 16!84 ft2
* = 01((360! " 2× 53!13!)$360) = 11!071 ft"7 = I$* = 1!521 ft
"046677 = 1!323
Then ] = (1!49$0!012)(16!84)(1!323)(0!001)045
] = 87!5 cfs
979
PROBLEM 10.128
Situation: A concrete channel is described in the problem statement.
Find: Average velocity and discharge.
Assumptions: c& = 0!003 ft: = 1!41× 10"5 ft2$s\
ANALYSIS
" = I$* = (10 + 12)6$(10 + 6&5× 2) = 132$36!8 = 3!58
(c&$4") = 0!003$(4× 3!58) = 0!00021Reb1*2 = ((4")3*2$:)(2)6)1*2 = [(4× 3!58)3*2$1!41× 10"5](2)$2000)1*2
= 6!9× 105
From Fig. 10.8 b = 0!014! Then
, =p8)"6$b
=p8) × 3!58$(2000× 0!014)
= 5.74 ft/s
] = , I
= 5!74× 132= 758 cfs
Alternate method, assuming Q = 0!015
, = (1!49$Q)"2*361*2
= (1!49$0!015)(3$3!58)2*3(1$2' 000)1*2
= 5.18 fps
] = 5!18(132)
= 684 cfs
980
PROBLEM 10.129
Situation: A concrete channel is described in the problem statement.
Find: Depth of ow in trapezoidal channel.
Assumptions: Q = 0!012
APPROACH
Using Manning’s equation (traditional units).
ANALYSIS
Flow area
I1 =
µ10 ft + (10 ft + 2A)
2
¶A
= 10A+ A2
Wetted perimeter
*wet = 10 ft + 2×&2A2
= 10 + 2&2A
Hydraulic radius
"7 =Ic*wet
=10A+ A2
10 + 2&2A
Manning’s equation (traditional units)
] =1!49
QI1"
2*37
p6!
1000 =1!49
0!012ס10A+ A2
¢×µ10A+ A2
10 + 2&2A
¶2*3r1 ft
500 ft
Solve this equation (we used a computer program—Maple) to give A = 5! 338 ft!
A = 5! 34 ft
981
PROBLEM 10.130
Situation: A channel is described in the problem statement.
Find: Discharge in trapezoidal channel.
Assumptions: Q = 0!012
ANALYSIS
] = (1!49$Q)I"2*361*2
I = 10× 5 + 52' * = 10 + 2&52 + 52 = 24!14 ft
" = I$* = 75$24!14 = 3!107 ft
Then
] = (1!49$0!012)(75)(3!107)2*3(4$5' 280)1*2
= 546 cfs
982
PROBLEM 10.131
Situation: A channel is described in the problem statement.
Find: The uniform ow depth.
Assumptions: Q = 0!015
ANALYSIS
] = (1$Q)I"2*361*2
25 = (1!0$0!015)4A(4A$(4 + 2A))2*3 × 0!0041*2
Solving for A yields: A = 1!6 m
983
PROBLEM 10.132
Situation: A channel is described in the problem statement.
Find: The depth of ow.
Assumptions: Q = 0!015
ANALYSIS
] = (1!49$Q)I"2*361*2
500 = (1!49$0!012)12A(12A$(12 + 2A))2*3 × (10$8' 000)1*2
Solving for A yields: A = 4!92 ft
984
PROBLEM 10.133
Situation: A channel is described in the problem statement.
Find: Depth of ow in channel.
Assumptions: Q = 0!015
ANALYSIS
] = (1!49$Q)I "2*37 6
1*20
3' 000 = ((1!49)$(0!015))(10A+ 2A2)((10A+ 2A2)$(10 + 2&5A))2*3(0!001)1*2
955 = (10A+ 2A2)((10A+ 2A2)$(10 + 2&5A))2*3
Solving for A gives A = 10!1 ft
985
PROBLEM 10.134
Situation: A canal is described in the problem statement.
Find: Design a canal having the best hydraulic section for the design ow.
ANALYSIS
For best hydraulic section, the shape will be a half hexagon as depicted belowassume Q = 0!015 (concrete, wood forms unnished - Table 10.3)
b
b
y45 deg
Manning’s equation] = (1!49$Q)I"046677 60450
Then
900 = (1!49$0!015)I"046677 (0!002)045
I"046677 = 202!6
But I = by +?2 where ? = > cos 45! = 0!707b
I = 0!707b2 + 0!50>2 = 1!207b2
"7 = I$* = 1!207b2$3> = 0!4024>
Thus
I"046677 = 202!6 = 1!207>2(0!4024>)04667
>24667 = 308; > = 8.57 ft
986
PROBLEM 10.135
Situation: Sources and loads are described in the problem statement.
Find: Load distribution and pressure at load points.
ANALYSIS
An assumption is made for the discharge in all pipes making certain that the conti-nuity equation is satised at each junction. The following gure shows the networkwith assumed ows.
A
B C
D E
10 cfs 10 cfs
5 cfs
5 cfs 0 cf
s
0 cf
s
k=0.3021
k=0.3021
k=0.00944
k=1.059 k=2.
294
k=0.
7516
15 cfs 10 cfs
5 cfs
Darcy-Weisbach equation
M( = b
µ2
1
¶µ, 2
2)
¶
= 8
µb2
)1502
¶]2
= c]2!
where c = 8³
(ED9582
´! The loss coe"cient, c, for each pipe is computed and shown
in Fig. A. Next, the ow corrections for each loop are calculated as shown in theaccompanying table. Since Q = 2 (exponent on ]), Qc]:"1 = 2c]. When thecorrection obtained in the table are applied to the two loops, we get the pipe dischargesshown in Fig. B. Then with additional iterations, we get the nal distribution ofow as shown in Fig. C. Finally, the pressures at the load points are calculated.
Loop ID-Pipe M( = c]
2 2c]ID +0.944 0.189I1 -26.475 10.590D1 0 0Pc]21 "
Pc]211 -25.53
P2<] = 10!78
!Q=-22.66/9.062=2.50 cfs
987
Loop D-1NPipe M( 2c]D- +30.21 6.042D1 0 0-N 0 01N -7.55 3!02
+22.66 9.062!Q=-25.53/10.78=-2.40 cfs
AB C
D E
12.4 cfs 7.5 cfs
7.5 cfs
2.6 cfs
4.9
cfs
2.5
cfs
10 cfs
5 cfs
15 cfs
AB C
D E
11.4 cfs 9.0 cfs
6.0 cfs
3.60 cfs
2.40
cfs
1.0
cfs
10 cfs
5 cfs
15 cfs
%) = %= " ((c=>]2=> + c>)]2>))
= 60 psi × 144 psf/psi" 62!4(0!00944× 11!42 + 0!3021× 9!02)= 8640 psf " 1603 psf= 7037 psf
= 48.9 psi
%W = 8640" ((c=9]2=9 + c9W]29W)
= 8640" 62!4(1!059× 3!52 + 0!3021× 62)= 7105 psf
= 49.3 psi
988
PROBLEM 10.136
Situation: A platform is described in the problem statement.
Find: Scope the system and make enough calculations to justify the feasibility.
Assumptions: Assume that the equipment will have a maximum weight of 1,000 lbfand assume that the platform itself weighs 200 lbf. Assume that the platform willbe square and be 5 ft on a side.
ANALYSIS
The plan and elevation view are shown below:
A=9 sq. ft.
View A-A
A A
Assume that a plenum 1 ft inside the perimeter of the platform will be the source ofair for the underside of the platform.Now develop the relationship for pressure distribution from plenum to edge of plat-form. The ow situation is shown below.
Plenum
1 ft
! y
Determine the M( from the plenum to the edge of the platform:
M( = b(2$1),2$2)
Assume b = 0!02' " = I$* = !?D$2D = !?$2 and 2 = 1 ft.
M( = (0!02× 1$(!?$2)), 2$2)= (0!02$!?), 2$)
= 0!02, 2$(!?))
Multiply both sides by (
!%( = (M( = (0!02$!?)#,2
Assume # = 0!0023 slugs/ft3!Then
989
!%( = (0!02$!?)(!0023), 2
= (46, 2$!?)× 10"6
%avg.(over 4 ft2 area) = (23 , 2$!?)× 10"6
Also determine the !% due to the change in momentum as the ow discharges fromthe plenum.
p 1 p 2
Momentum equation (x-direction)
XH$ = /!,! " /#,#
D!?(%1 " %2) = , (#, D!?)
!%mom = #, 2
The pressure force on the platform is given byThe pressure within the 9 ft2 interior area of the platform will be
!%mom +!%( = ,2(!0023 + (46$!?)× 10"6)
The pressure force on platform is given by
H = 9 ft2 × (!%mom +!%() +!%(Iavg. × 12 ft2
H = 9× , 2[!0023 + (46$!?)× 10"6)] + 12, 2[(23, 2$!?)× 10"6]H = , 2[9× !0023 + (9× 46$!?)× 10"6 + 12× 23× 10"6$!?]H = , 2[9× !0023 + 690× 10"6$!?]
Let !? = 1$8 in.= 0!01042 ft
990
b = , 2[9× !0023 + 690× 10"6$!01042]= , 2[0!0207 + 0!662]
H = !0869, 2
1200 = !0869, 2
, 2 = 13' 809 ft2$s2
, = 117!5 ft/s
] = 117!5×!? × 12 = 14!69 ft3$s!% = , 2(!0023 + 46× 10"6$!?)
= , 2(!0023 + 46× 10"6$0!01042)= , 2(!0023 + !00441)
= 92!7 psf
Power equation
* = ]!%$550
= 14!69× 92!7$550= 2!48 hp
Assume 50% e"ciency for blower, so required power % 5 horsepower. Blower couldbe driven by gasoline engine and also be located on the platform.
991
PROBLEM 10.137
Situation: A system for measuring the viscosity of a gas is described in the problemstatement.
Find: Design the system.
ANALYSIS
There are two design constraints; 1) the Reynolds number in the tube should be lessthan 1000 to insure that the ow in laminar and a closed form expression is availableto the viscosity and 2) the pressure di!erential along the tube should su"ciently lowthat compressibility e!ects on the gas will not be important yet large enough thata measurement can be made with acceptable accuracy. Although not stated in theproblem assume that the density of the gases ranges from 0.8 kg/m3 to 1.5 kg/m3!As a start assume the tube has a 1 mm internal diameter. The Reynolds numbercorresponding to the highest density and lowest viscosity would be
Re =, × 10"3 × 1!5
10"5= 150,
The maximum velocity should not exceed 6 m/s. The pressure drop for laminar owin a pipe is
!% = 3272,
12
Assume the length of the tube is 500 mm (0.5 m), the pressure drop for the largestviscosity would be given by
!% = 321!5× 10"5 × 0!5,
10"6= 240,
For a velocity of 6 m/s, the pressure drop would be 1,440 Pa or 0.2 psig. or about5 in of water. If the initial pressure were atmospheric, this would represent abouta 1% change in pressure which would be acceptable to avoid compressibility e!ects.Compressibility e!ect could also be reduced by operating at a higher pressure wherethe percentage change in pressure would be even smaller.This design could now be rened to conform with the equipment available for mea-suring pressure. Another issue to consider is the design of the entrance to the tubeto minimize entrance losses and exit losses such as a sudden expansion. There is alsothe problem of measuring a small discharge. An idea to consider would be attachingthe end of the tube to an inatable bag immersed in water and measuring the dis-placement of the water with time. Another idea is measuring the pressure drop in atank supplying the tube and calculating the mass change with time.
992
PROBLEM 10.138
Situation: A problem associated with a pressure tap is described in the problemstatement.
Find: Develop ideas to avert the problem.
ANALYSIS
One idea is to use a purge line as shown in the gure. There is a continuous owof gas out the pressure tap which keeps the tap clean. The ow rate should be highenough to keep the tap clean and low enough not of a!ect the readings. The purgegases would be introduced close to the tap so the head loss associated with frictionwould be minimized. The largest pressure drop would be the sudden expansion lossat the tap exit. If %! is the nominal pressure being measured at the tap, then theratio of the sudden expansion losses to the nominal pressure is
#, 2
2%!
and this ratio should be kept as small as possible. If the ratio is 0.01 then an errorof 1% would be produced in the pressure measurement. The ow rate should be justsu"cient to keep the taps clean. This value will depend on the experimental condi-tions.
pressuregage
purgegas
Flow
993
PROBLEM 11.1
Situation: A hypothetical pressure-coe"cient distribution acts on an inclined plate.Other details are provided in the problem statement
Find: Coe"cient of drag.
Assumptions: Viscous e!ects are negligible.
ANALYSIS
Force normal to plate
H: = !%average ×I= -,I'@G#,
20 $2× Z× 1
= 1!5× #, 20 $2× Z× 1
For unit depth of plate and a length Z. Force parallel to free stream direction is thedrag force and is equal to
H9 = Hnormal cos 60!
= (1!5#, 20 $2)× Z× 1$2
The drag coe"cient is dened from the drag force as
-9 =H9
12#, 20 I
=(1!5#, 20 $2)× Z× 1$2
12#, 20 × Z× 1
= 1.5
994
PROBLEM 11.2
Situation: Fluid ow past a square rod. The pressure coe"cient values are shown inthe problem statement.
Find: Direction from which the ow is coming.
ANALYSIS
Flow is from the N.E. direction.Correct choice is d)
995
PROBLEM 11.3
Situation: A pressure distribution is described in the problem statement.
Find: Drag coe"cient for rod.
APPROACH
Apply drag force.
ANALYSIS
The drag coe"cient is based on the projected area of the block from the direction ofthe ow which is the area of each face of the block. The force contributing to dragon the downstream face is
H9 = 0!5I,#,2! $2
The force on each side face is
H& = 0!5I,#,2! $2
Then the drag force on one side is
H& sinT = 0!5I,#,2! $2× 0!5
The total drag force is
H9 = 2((0!5I,#,2! $2)× 0!5) + 0!5I,#,
2! $2 = -9I,#,
2! $2
Solving for -9 one gets -9 = 1!0
996
PROBLEM 11.4
Situation: A pressure distribution is described in the problem statement.
Find: Drag coe"cient for the block.
ANALYSIS
The drag coe"cient is based on the projected area of the block from the ow direction,I,. The drag force on the windward side is
H% = 0!8×1
2#, 20 I,
The force on each of the two sloping sides is
H& = "1!2×1
2#, 20 I,
The total drag force on the rod is
H9 = 0!8×1
2#, 20 I, " 2("1!2×
1
2#, 20 I,) sin 30
!
=1
2#, 20 I,(0!8 + 1!2)
The drag coe"cient is
-9 =H9
12#, 20 I,
= 2.0
997
PROBLEM 11.5
Situation: A wind tunnel can produce air velocity of 100ft/s, 3ft×3ft test section.
Find: The design objective is to design an experiment to measure the drag coe"cientof spheres of varying surface roughness.
ANALYSIS
The drag force equation is
H9 = -9I,#,2$2
or -9 = H9$(I,#,2$2)
Thus H9' I,' and , will have to be measured. The air density # can be obtainedby measuring the air temperature with a thermometer and the air pressure with abarometer and solving for # by the equation of state.
You will need to decide how to position the sphere in the wind tunnel so that its sup-port does not have an inuence on ow past the sphere. One possible setup mightbe as shown below.
Rod
Force dynamometer
Pitot tube
The sphere is attached to a rod and the rod in turn is attached to a force dynamometeras shown. Of course the rod itself will produce drag, however; its drag can beminimized by enclosing the vertical part of the rod in a streamlined housing. Thehorizontal part of the rod would have negligible drag because much of it would bewithin the low velocity wake of the sphere and the drag would be skin friction dragwhich is very small. The air velocity approaching the sphere could be measuredby a Pitot tube inserted into the wind tunnel. It would be removed when thedrag of the sphere is being measured. The projected area of the sphere would beobtained by measuring the sphere diameter and then calculating the area. Thepressure transducer is placed outside the wind tunnel. Blockage e!ects could also beaddressed in the design of this experiment.
Another design consideration that could be addressed is size of sphere. It should belarge enough to get measurable drag readings but not so large as to produce signicantblockage.
998
PROBLEM 11.6
Situation: A runner is competing in a 10 km race.Running speed is a 6:30 pace (i.e. each mile takes six minutes and 30 seconds). Thus,, = 4!127m$ s!The product of frontal area and coe"cient of drag is -9I = 8!0 ft
2 = 0!743m2!One “food calorie” is equivalent to 4186 J.
Find: Estimate the energy in joules and kcal (food calories) that the runner needs tosupply to overcome aerodynamic drag.
Properties: Density of air is 1!22 kg$m3!
Assumptions: Assume that the air is still—that is, there is no wind.
APPROACH
Energy is related to power (* ) and time (P) by N = *P. Find power using theproduct of speed and drag force (* = , HDrag) ! Find time by using distance (A) andspeed (A = , P) !
ANALYSIS
Find the time to run 10 km!
P =A
,
=10' 000m
4!127m$ s
= 2423 s (40min and 23 s)
Drag force
HDrag = -9IRef
µ#, 2
2
¶
=¡0!743m2
¢Ã(1!22 kg$m3) (4!127m$ s)2
2
!
= 7!72N
Power
* = HDrag,
= (7!72N) (4!127m$ s)
= 31!9W
Energy
N = *P
= (31!9 J$ s) (2423 s)
= 77!2 kJ
999
Energy = 77!2 kJ = 18!4 Food Calories
COMMENTS
1. The drag force (7!72N) is small, about 1!7 lbf!
2. The power to overcome drag is small (31!9W) ! Based on one of the author’s(DFE) experience in sports, a t runner might supply 180W to run at a 6:30pace. Thus, the power to overcome drag is about 1/6 of the total power thatthe runner supplies.
3. The energy that the runner expends (18!4 Food Calories) can be acquired byeating a small amount of food. For example, a small piece of candy. .
1000
PROBLEM 11.7
Situation: Wind (,! = 35m$ s) acts on a tall smokestack.Height is M = 75m! Diameter is 1 = 2!5m!
Find: Overturning moment at the base.
Assumptions: Neglect end e!ects—that is the coe"cient of drag from a cylinder ofinnite length is applicable.
Properties: Air at 20 !C from Table A.3: # = 1!2 × 99$101!3 = 1! 17 kg$m3, : =1!51× 10"5m2$ s!
ANALYSIS
Reynolds number
Re =,!1
:
=(35m$ s)× (2!5m)1!51× 10"5m2$ s
= 5!79× 106
Drag forceFrom Fig. 11.5 -9 ! 0!62 so
H9 = -9I,#, 202
= 0!62× (2!5× 75m2)×(1! 17 kg$m3)× (35m$ s)2
2= 83!31 kN
Equilibrium. Sketch a free-body diagram of the stack—the overturning moment +!
is
+! = M$2× H9+! = (75$2) m× (83!31 kN)
= 3.12 MN·m
1001
PROBLEM 11.8
Situation: Wind acts on a ag pole. Additional details are provided in the problemstatement.
Find: Moment at bottom of ag pole.
Properties: From Table A.3 : = 1!51× 10"5 m2$s and # = 1!20 kg/m3!
ANALYSIS
Reynolds number
Re = , 1$: = 25× 0!10$(1!51× 10"5) = 1!66× 105
Drag forceFrom Fig. 11-5: -9 = 0!95 so the moment is
+ = H94$2 = -9I,#(,20 $2)×4$2
= 0!95× 0!10× (352$2)× 1!2× 252$2
= 21.8 kN·m
1002
PROBLEM 11.9
Situation: Flow from 2 to 6 m3$ s though a 50cm diameter pipe.
Find: Design a ow measuring device that consists of a small cup attached to acantilevered support.
ANALYSIS
The cup, sphere or disk should probably be located at the center of the pipe (asshown below) because the greatest velocity of the air stream in the pipe will be atthe center.
cup
Force dynamometer
Streamlined support strut
You want to correlate , and ] with the force acting on your device. First, neglectingthe drag of the support device, the drag force is given as
H9 = -9I,#,20 $2
or ,0 = (2H9$(-9I,))1*2
You can measure temperature, barometric pressure, and gage pressure in the pipe.Therefore, with these quantities the air density can be calculated by the equationof state. Knowing the diameter of the cup, sphere or disk you can calculate I,!Assume that -9 will be obtained from Table 11.1 or Fig. 11.11. Then the otherquantity that is needed to estimate ,0 is the drag H9. This can be measured by aforce dynamometer as indicated on the sketch of the device. However, the supportstrut will have some drag so that should be considered in the calculations. Anotherpossibility is to minimize the drag of the support strut by designing a housing to taround, but be separate from the vertical part of the strut thus eliminating most ofthe drag on the strut. This was also suggested for Problem 11.5.
Once the centerline velocity is determined it can be related to the mean velocity inthe pipe by Table 10.1 from which the ow rate can be calculated. For example, ifthe Reynolds number is about 105 then , $,max ! 0!82 (from Table 10.1) and
] = , I
] = 0!82,maxI
There may be some uncertainty about -9 as well as the drag of the support rod;therefore, the device will be more reliable if it is calibrated. This can be done as
1003
follows. For a given ow make a pitot-tube-velocity-traverse across the pipe fromwhich ] can be calculated. Also for the given run measure the force on the forcedynamometer. Then plot H vs. ]. Do this for several runs so that a curve of H vs.] is developed (calibration completed).
1004
PROBLEM 11.10
Situation: Wind acts on a cooling tower. Height is 4 = 350 ft!Average diameter is 1 = 250 ft! Wind speed is ,! = 200 mph = 293!3 ft$ s!
Find: Drag (H9) acting on the cooling tower.
Properties: Air at 60 !F (Table A.3) has properties of # = 0!00237 slugs/ft3; : =1!58× 10"4 ft2/s.
Assumptions: 1.) Assume the coe"cient of drag of the tower is similar to the coe"-cient of drag for a circular cylinder of innite length (see Fig. 11.5).2.) Assume the coe"cient of drag for a cylinder is constant at high Reynolds numbers.
ANALYSIS
Reynolds number
Re =,!1
:
=293!3× 2501!58× 10"4
= 4! 641× 108
From Fig. 11-5 (extrapolated) -9 ! 0!70! The drag force is given by
H9 = -9IRef#, 2
2
= 0!70× (250 ft× 350 ft)¡0!00237 slugs/ft3
¢(293!3 ft$ s)2
2
= 6! 244× 106slug · fts2
H9 = 6! 24× 106 lbf
1005
PROBLEM 11.11
Situation: A cylindrical rod is rotated about its midpoint–additional details areprovided in the problem statement.
Find: a) Derive an equation for the power to rotate rod.b) Calculate the power.
ANALYSIS
For an innitesimal element, A3' of the rod
AH9 = -9(A3)A#,2rel.$2
where ,rel. = 3J! Then
A& = 3AH9 = -9#A(,2rel.$2)3A3
&total = 2
Z K0
0
A& = 2
Z K0
0
-9A#((3J)2$2)3A3
&total = -9A#J2
Z K0
0
33A3 = -9A#J2340$4
but 30 = 2$2 so
&total = -9A#J224$64
or
* = &J = -9A#J324$64
d
r ro
&
& r
Then for the given conditions:
* = 1!2× 0!02× 1!2× (50)3 × 1!54$64
= 285 W
1006
PROBLEM 11.12
Situation: A ping-pong ball is supported by an air jet.Mass of the ball is / = 2!6× 103 kg!Diameter of the ball is 1 = !038m! Air temperature is & = 18 !C = 291!2K. Airpressure is % = 27 inches-Hg. = 91!4 kPa!
Find: The speed of the air jet.
Properties: Gas constant for air from Table A.2 is 287 J$ kg · K! Air from Table A.3:7 = 1!80× 10"5N · s$m2!
Assumptions: Assume the ping-pong ball is stationary (stable equilibrium).
APPROACH
For the ball to be in equilibrium, the drag force will balance the weight. Relatethe drag force to the speed of the air and apply the Cli! and Gauvin correlation toestimate the coe"cient of drag. Solve the resulting system of equation to nd thespeed of the air jet.
ANALYSIS
Ideal gas law
# =%
"&
=91' 400Pa
(287 J$ kg · K) (291!2K)= 1!094 kg$m3
Equilibrium/) = HDrag (1)
Drag force
HDrag = -9IRef
µ#, 2
2
¶
= -9
µ012
4
¶µ#, 2
2
¶(2)
Cli! and Gauvin correlation (drag on a sphere)
-9 =24
Re9
¡1 + 0!15Re046879
¢+
0!42
1 + 4!25× 104Re"1416(3)
Reynolds Number
Re =, 1#
7(4)
1007
Solve Eqs. (1) to (4) simultaneously. The computer program TKSolver was used forour solution.
Re = 21' 717
HDrag = 0!026N
-9 = 0!46
, = 9!45m$ s
,jet = 9!45m$ s
1008
PROBLEM 11.13
Situation: Vortices are shed from a agpole–additional details are provided in theproblem statement.
Find: Frequency of vortex shedding
ANALYSIS
From Problem 11.8 Re = 1!66× 105! From Fig. 11-10 6P = 0!21
6P = QA$,0
or
Q = 6P,0$A
= 0!21× 25$0!1 = 52.5 Hz
1009
PROBLEM 11.14
Situation: Wind acts on a billboard–additional details are provided in the problemstatement.
Find: Force of the wind.
Properties: From Table A.3 : = 1!58× 10"4 ft2/s; # = 0!00237 slugs/ft3!
ANALYSIS
Reynolds number
,0 = 50 mph = 73 ft/s
Re = ,0>$:
= 73× 10$(1!58× 10"4)= 4!6× 106
Drag forceFrom Table 11-1 -9 = 1!19! Then
H9 = -9I,#,20 $2
= 1!19× 300× 0!00237× 732$2
= 2250 lbf
1010
PROBLEM 11.15
Situation: A 8 ft by 8 ft plate is immersed in a ow of air (60 !F).Wind speed is ,! = 100 ft$ s! Flow direction is normal to the plate.
Find: Drag force on the plate.
Properties: From Table A.3 for air at 60 !F: # = 0!00237 slugs/ft3!
APPROACH
Apply drag force equation.
ANALYSIS
From Table 11-1,-9 = 1!18
Drag force
H9 = -9I,
µ#, 202
¶
H9 = (1!18)(8× 8)(0!00237)(1002)
2
H9 = 895 lbf
1011
PROBLEM 11.16
Situation: A 2m by 2m square plate is towed through water , = 1m$ s! Theorientation is (a) normal and then (b) edgewise.
Find: Ratio of drag forces (normal to edgewise orientation).
Properties: From Table A.5 : = 1!31× 10"6 m2$s.
ANALYSIS
Drag force
Hedge = 2-(I#,2$2
Hnormal = -9I#,2$2
Then
Hnormal$Hedge = -9$2-(
Re = ReE = , D$: = 1× 2$(1!31× 10"6)= 1!53× 106
From Fig. 9-14 -( = 0!0030 and from Table 11-1 -9 = 1!18! So
Hnormal$Hedge = 1!18$(2× 0!0030) = 197
1012
PROBLEM 11.17
Situation: A round disk (1 = 0!5m) is towed in water (, = 3m$ s)!The disk is oriented normal to the direction of motion.
Find: Drag force.
APPROACH
Apply the drag force equation.
ANALYSIS
From Table 11.1 (circular cylinder with _$A = 0)
-9 = 1!17
Drag force
H9 = -9I,
µ#, 202
¶
= 1!17
µ0 × 0!52
4
¶µ1000× 32
2
¶
= 1033! 8N
H9 = 1030N
1013
PROBLEM 11.18
Situation: A circular billboard is described in the problem statement.
Find: Force on the billboard.
Properties: From Table A.3, # = 1!25 kg/m3!
APPROACH
Apply drag force equation.
ANALYSIS
Drag forceFrom Table 11.1 -9 = 1!17
H9 = -9I,#,2$2
= 1!17× (0$4)× 62 × 1!25× 302$2 = 18,608 N
= 18.6 kN
1014
PROBLEM 11.19
Situation: Wind acts on a sign post (see the problem statement for all the details).
Find: Moment at ground level.
Properties: From Table A.3 # = 1!25 kg/m3!
ANALYSIS
Drag forceFrom Table 1.1 -9 = 1!18 Then
+ = 3× H9 = 3× -9I,#, 2$2= 3× 1!18× 22 × 1!25× 402$2
= 14.16 kN·m
1015
PROBLEM 11.20
Situation: A truck carries a rectangular sign.Dimensions of the sign are 1!83m by 0!46m!Truck speed is , = 25m$ s!
Find: Additional power required to carry the sign.
Assumptions: Density of air # = 1!2 kg/m3!
APPROACH
Apply the drag force equation. Then, calculate power as the product of force andspeed.
ANALYSIS
Drag forceFrom Table 11-1 for a rectangular plate with an aspect ratio of _$A = 3!98:
-9 % 1!20
Drag Force
H9 = -9I,#,2$2
= 1!2× 1!83× 0!46× 1!2× 252$2= 379 N
Power
* = H9 × ,= 379× 25
* = 9!47 kW
1016
PROBLEM 11.21
Situation: A cartop carrier is used on an automobile (see the problem statement forall the details).
Find: Additional power required due to the carrier.
Assumptions: Density, # = 1!20 kg/m3. -9 will be like that for a rectangular plate:L$> = 1!5$0!2 = 7!5
ANALYSIS
From Table 11-1-9 ! 1!25
The air speed (relative to the car) is
, = 100 km/hr
= 27! 78 m/s
The additional power is!* = H9,
Substituting drag force
!* = -9I,(#,2$2),
= 1!25× 1!5× 0!2× 1!20× 27!782$2× 80000$3600= 3.86 kW
1017
PROBLEM 11.22
Situation: The problem statement describes motion of an automobile.
Find: Percentage savings in gas mileage when travelling a 55 mph instead of 65 mph.
ANALYSIS
The energy required per distance of travel = H × 9 (distance). Thus, the energy, N,per unit distance is simply the force or
N$9 = H
Substituting drag force
N$9 = 7×. + -9I,#,2$2
N$9 = 0!02× 3' 000 + 0!3× 20× (0!00237$2), 2
For
, = 55 mph = 80.67 ft/sec
N$9 = 106!3 ft-lbf
For
, = 65 mph = 95.33 ft/sec
N$9 = 124!6 ft-lbf
Then energy savings are
(124!6" 106!3)$124!6 = 0!147 or 14.7%
1018
PROBLEM 11.23
Situation: A car (. = 2500 lbf) coasting down a hill (Slope = 6%)has reached steadyspeed.7rolling = 7 = 0!01
-9 = 0!32 I\ = 20 ft2
#air = # = 0!002 slug$ ft3
Find: Maximum coasting speed.
ANALYSIS
Slope of a hill is rise over run, so the angle of the hill is
tan K = 0!06
or
K = arctan (0!06)
= 0!0599 rad = 3!43!
Equate forcesH9 + HK =. × sin 3!43o
where H9 =drag force, HK =rolling friction and . =weight of car!
Insert expressions for drag force and rolling friction.
-9I,#,2$2 +. × 0!01× cos 3!43! =. × sin 3!43!
, 2 =2. (sin 3!43! " !01× cos 3!43!)
-9I,#
, 2 =2× 2500(0!0599" 0!00998)
0!32× 20× 0!002= 1! 95× 104 ft2/s2
, = 139!6 ft/s = 95.2 mph
1019
PROBLEM 11.24
Situation: The problem statement describes a car being driven up a hill
Find: Power required.
ANALYSIS
The power required is the product of the forces acting on the automobile in thedirection of travel and the speed. The drag force is
H9 =1
2#, 2-9I =
1
2× 1!2× 302 × 0!4× 4 = 864 N
The force due to gravity is
HD =+) sin 3o = 1000× 9!81× sin 3o = 513 N
The force due to rolling friction is
HK = 7+) cos 3o = 0!02× 1000× 9!81× cos 3o = 196 N
The power required is
* = (H9 + HK + H(), = 1573× 30 = 47.2 kW
1020
PROBLEM 11.25
Situation: The problem statement describes a car traveling on a level road.
Find: Power required.
ANALYSIS
Power* = H,
where H = H9 + HK!Drag force
H9 = -9I,#,20 $2
= 0!4× 2× 1!2× 402$2= 972 N
Friction force
HK = 0!02 .
= 0!02× 10' 000 N= 200 N
Power
* = (972 + 200)× 30= 35.2 kW
1021
PROBLEM 11.26
Situation: The problem statement describes the wind force on a person.
Find: Wind force (the person is you).
Assumptions: -9 is like a rectangular plate: -9 ! 1!20! Height is 1.83 meters;width is .3 meters.
APPROACH
Apply the ideal gas law, then the drag force equation.
ANALYSIS
Ideal gas law
# = %$"&
= 96' 000$(287× (273 + 20))= 1!14 kg/m3
Drag force
H9 = -9I,#,2$2
= 1!2× 1!83× 0!30× 1!14× 302$2
= 338 N
COMMENTS
1. H9 will depend upon -9 and dimensions assumed.
1022
PROBLEM 11.27
Situation: A boxcar is described in the problem statement.
Find: Speed of wind required to blow boxcar over.
Assumptions: & = 10!-; # = 1!25 kg/m3!
ANALYSIS
Take moments about one wheel for impending tipping.X
+ = 0
Fwind
W
W
0.72 m2.51 m
. × 0!72" H9 × 2!51 = 0
H9 = (190' 000× 1!44$2)$2!51 = 54' 500 N = -9I,#,2$2
From Table 11-1, assume -9 = 1!20! Then
, 2 = 54' 500× 2$(1!2× 12!5× 3!2× 1!25)
,=42.6 m/s
1023
PROBLEM 11.28
Situation: A bicyclist is coasting down a hill–additional details are provided in theproblem statement
Find: Speed of the bicycle.
ANALYSIS
Consider a force balance parallel to direction of motion of the bicyclist:
XH = 0
+Hwgt. comp. " H9 " Hrolling resist. = 0
. sin 8! " -9I,#, 2F.$2" 0!02 . cos 8! = 0
. sin 8! " 0!5× 0!5× 1!2, 2F$2" 0!02. cos 8! = 0
. = 80) = 784!8 N
. sin 8! = 109!2 N
. cos 8! = 777!2 N
Then109!2" 0!15, 2F " !02× 777!2 = 0
,F = 25!0 m/s = ,bicycle + 5 m/s
Note that 5 m/s is the head wind so the relative speed is ,bicycle + 5!
,bicycle=20.0 m/s
1024
PROBLEM 11.29
Situation: A bicyclist is traveling into a 3 m/s head wind. Power of the cyclist is* = 175W!Frontal area is I, = 0!5m3! Coe"cient of drag is -9 = 0!3!
Find: Speed of the bicyclist.
Properties: Air density is 1!2 kg$m3!
APPROACH
The drag force depends on the wind speed relative to the cyclist. Use this fact, andapply the power and drag force equation to give a cubic equation.
ANALYSIS
Drag force
H9 = -9I,
µ#, 2F2
¶
,F = (,1 + 3)
H9 = -9I,
Ã# (,1 + 3)
2
2
!
Power
* = H9 × ,1
= -9I,
Ã# (,1 + 3)
2
2
!,1
175 = 0!3× 0!5
Ã1!2 (,1 + 3)
2
2
!,1
Solving the cubic equation (we used a computer program) for speed gives two complexroots and one real root: ,1 = 10! 566!
,1 = 10!6 m$ s
1025
PROBLEM 11.30
Situation: The problem statement describes a sports car with (a) the roof closed and(b) the roof open
Find: (a) Maximum speed with roof closed.(b) Maximum speed with roof open.
Properties: From Table A.3 # = 1!2 kg/m3!
ANALYSIS
* = H, = (7roll+) + -9I,#,20 $2),
* = 7roll+) ,0 + -9I,#,30 $2
Then
80' 000 = 0!05× 800× 9!81, + -9 × 4× (1!2$2), 3
80' 000 = 392!4, + 2!40-9,3
Solving with -9 = 0!30 (roof closed) one nds
,=44.3 m/s (roof closed)
Solving with -9 = 0!42 (roof open) one nds
,=40.0 m/s (roof opened)
1026
PROBLEM 11.31
Situation: An automobile is traveling into a head wind–additional details are pro-vided in the problem statement.
Find: Velocity of the head wind.
Assumptions: Gas consumption is proportional to power.
ANALYSIS
Gas consumption is proportional to H9, where , is the speed of the automobile andH9 is the total drag of the auto (including rolling friction).Drag force
H9 = -9I,#,20 $2 + 0!1+)
= 0!3× 2× 1!2, 20 $2 + 0!1× 500× 9!81= 0!360, 20 + 490!5 N
,0Istill air = (90' 000$3' 600) = 25!0 m/s
Then
H9Istill air = 0!36× 252 = 490!5 = 715!5 N*still air = 715!5× 25 = 17!89 kW
*head wind = 17' 890× 1!20 = (0!36, 20 + 490!5)(25)
where
,0 = ,headwind + 25 = 32 m/s
,headwind=7 m/s
1027
PROBLEM 11.32
Situation: The problem statement describes a 1932 Fiat Balillo that is “souped up”by the addition of a 220-bhp engine.
Find: Maximum speed of “souped up” Balillo.
ANALYSIS
From Table 11.2, -9 = 0!60!
* = (H9 + HK),
, = 60 mph = 88 ft/s
HK = (*$, )" H9 = (*$, )" -9I,#, 2$2= ((40)(550)$88)" (0!60)(30)(0!00237)(882)$2= 250" 165 = 85 lbf
“Souped up” version:
(H9 + 85), = (220)(550)
((-9I,#,2$2) + 85), = (220)(550)
(-9I,#,3$2) + 85, = (220)(550)
0!0213, 3 + 85, " 121' 000 = 0
Solve for , :
, = 171!0 ft/s
= 117 mph
1028
PROBLEM 11.33
Situation: To reduce drag, vanes are added to truck–additional details are providedin the problem statement.
Find: Reduction in drag force due to the vanes.
Assumptions: Density, # = 1!2 kg/m3!
APPROACH
Apply drag force equation.
ANALYSIS
H9 = -9I,#,2$2
H9reduction = 0!25× 0!78× 8!36× 1!2(100' 000$3' 600)2$2
H9reduction = 755 N
1029
PROBLEM 11.34
Situation: The problem statement describes a dirigible.
Find: Power required for dirigible.
ANALYSIS
Reynolds number
Re = ,0A$: = (25)(100)$(1!3× 10"4) = 1!92× 107
Drag force
From Fig. 11.11 (extrapolated) -9 = 0!05
H9 = -9I,#,20 $2
= (0!05)(0$4)(1002)(0!07$32!2)(252)$2
= 267 lbf
Power
* = H9,0
= (267)(25)
= 6,670 ft-lbf/s = 12.1 hp
1030
PROBLEM 11.35
Situation: To reduce drag, vanes are added to truck–additional details are providedin the problem statement.
Find: Percentage savings in fuel.
Assumptions: Density, # = 1!2 kg/m3!
ANALYSIS
Assume that the fuel savings are directly proportional to power savings.
* = H,
* = -9 × 8!36× 1!2, 3$2 + 450,
At 80 km/hr:
*w/o vanes = 0!78× 8!36× 1!2, 3$2 + 450, = 52!9 kW*with vanes = 42!2 kW
which corresponds to a 20.2% savings.At 100 km/hr:
*w/o vanes = 96!4 kW
*with vanes = 75!4 kW
which corresponds to a 21.8% savings.
1031
PROBLEM 11.36
Situation: A train is described in the problem statement.
Find: Percentage of resistance due to bearing resistance, form drag and skin frictiondrag.
Assumptions: Density, # = 1!25 kg/m3 and velocity, : = 1!41× 10"5 m2$s.
ANALYSIS
Drag force
H9form = -9I,#,20 $2
H9form = 0!80× 9× 1!25× , 20 $2 = 4!5,20
H9sk in = -(I#,20 $2
Reynolds number
ReE = , 2$: = , × 150$(1!41× 10"5)ReEI100 = (100' 000$3' 600)× 150$(1!41× 10"5) = 2!9× 108
ReEI200 = 5!8× 108
From Eq. (9.54), -(I100 = 0!00188; -(I200 = 0!00173!
, = 100 km/hr , = 200 km/hrH9Iform,100 = 3' 472 N H9Iform,200 = 13' 889 NH9,skin,100 = 1' 360 N H9Iskin,200 = 5006 NHbearing = 3' 000 N Hbearing = 3' 000 NHtotal = 7' 832 N Htotal = 21' 895 N
44% form, 17% skin, 39% bearing 63% form, 23% skin, 14% bearing
1032
PROBLEM 11.37
Situation: Viscosity of liquids—water, kerosene, glycerin.
Find: (b) Design equipment to measure the viscosity of liquids using Stoke’s law.(b) Write instructions for use the equipment.
ANALYSIS
Stoke’s law is the equation of drag for a sphere with a Reynolds number less than 0.5:
H9 = 307,0A
or 7 = H9$(30,0A)
One can use this equation to determine the viscosity of a liquid by measuring the fallvelocity of a sphere in a liquid. Thus one needs a container to hold the liquid (forinstance a long tube vertically oriented). The spheres could be ball bearings, glassor plastic spheres. Then one needs to measure the time of fall between two points.This could be done by measuring the time it takes for the sphere to drop from onelevel to a lower level. The diameter could be easily measured by a micrometer andthe drag, H9' would be given by
H9 =. " Hbuoyant
If the specic weight of the material of the sphere is known then the weight of thesphere can be calculated. Or one could actually weigh the sphere on an analyticbalance scale. The buoyant force can be calculated if one knows the specic weightof the liquid. If necessary the specic weight of the liquid could be measured with ahydrometer.
To obtain a reasonable degree of accuracy the experiment should be designed so thata reasonable length of time (not too short) elapses for the sphere to drop from onelevel to the other. This could be assured by choosing a sphere that will yield a fairlylow velocity of fall which could be achieved by choosing to use a small sphere overa large one or by using a sphere that is near the specic weight of the liquid (forinstance, plastic vs. steel).
COMMENTS
1. Other items that should be or could be addressed in the design are:
A. Blockage e!ects if tube diameter is too small.B. Ways of releasing sphere and retrieving it.C. Possibly automating the measurement of time of fall of sphere.D. Making sure the test is always within Stoke’s law range (Re G 0!5)E. Making sure the elapsed time of fall does not include the time when the
sphere is accelerating.
1033
PROBLEM 11.38
Situation: A 1-ft diameter sphere moves through oil–additional details are providedin the problem statement.
Find: Terminal velocity.
APPROACH
Apply equilibrium involving the weight, drag force and buoyant force.
ANALYSIS
Buoyancy force
Hbuoy. = , (oil= (4$3)0 × (1$2)3 × 0!85× 62!4= 27!77 lbf
Under non-accelerating conditions, the buoyancy is equal to the drag force plus theweight.
Fbuoy.
W+FD
H9 = ". + Hbuoy.
= "27!0 + 27!77 lbf= 0!77 lbf upward
Assume laminar ow. Then
H9 = 0!77 = 3071,0
,0 = 0!77$(3017)
,0 = 0!77$(30 × 1× 1)
,0 = 0.082 ft/s upward
Check laminar ow assumption with Reynolds number
Re = ,0A#$7 = 0!082× 1× 1!94× 0!85$1= 0!14 G0.5
Therefore the assumption is valid.
1034
PROBLEM 11.39
Situation: A sphere 2 cm in diameter rises in oil at a velocity of 1.5 cm/s.
Find: Specic weight of the sphere material.
APPROACH
Apply equilibrium to balance the buoyant force with the drag force and weight.
ANALYSIS
Equilibrium
XH = 0 = "H9 ". + Hbuoyancy
H9 = Hbuoyancy ". (1)
Reynolds number
Re =, 1#
7
=0!015× 0!02× 900
0!096= 2!812
Then from Fig. 11.11-9 ! 10!0
Substitute drag force, weight and Buoyancy force equations into Eq. (1)
-9I,#,20 $2 = , ((oil " (sphere) (2)
Sphere volume is
, = (4/3)033
= 4!19× 10"6 m3
Eq. (2) becomes
10× 0 × 0!012 × 900× 0!0152$2 = 4!19× 10"6(900× 9!81" (sphere)(sphere = 8753N$m3
(sphere = 8753N/m3
1035
PROBLEM 11.40
Situation: The problem statement describes a 1.5-mm sphere moving in oil.
Find: Terminal velocity of the sphere.
APPROACH
Apply the equilibrium principle. To nd the drag force, assume Stokes drag.
ANALYSIS
Equilibrium. Since the ball moves at a steady speed, the sum of forces is zero.
. = H> + H9 (1)
where . is weight, H> is the buoyant force and H9 is drag.
Because the viscosity is large, it is expected that the sphere will fall slowly, so assumethat Stoke’s law applies. Thus, the drag force is
H9 = 307,01
= 30:#,01
Buoyant force
H> = (oil
µ013
6
¶
Equilibrium (Eq. 1) becomes
. = H> + H9
(sphere
µ013
6
¶= (oil
µ013
6
¶+ 30:#,01
µ013(water
6
¶(6sphere " 6oil) = 30:#,01
Ã0 (0!0015m)3 × 9810N$m3
6
!(1!07" 0!95) = 30:#,01
2! 080× 10"6N = 30¡10"4m2$ s
¢ ¡950 kg$m3
¢,! (0!0015m)
2! 080× 10"6N =¡1! 343× 10"3 kg$ s
¢,!
The solution is,! = 1!55mm$ s
Check Reynolds number
Re =,01
:
=(0!00155m$ s)× (0!0015m)
10"4m2$ s= 0!023 25
1036
COMMENTS
The value of Re is within Stokes’ range (Re ' 0!5), so the use of Stokes’ law is valid.
1037
PROBLEM 11.41
Situation: A 2cm plastic ball with specic gravity of 1.2 is released from rest in water(T=20 !C)–additional details are provided in the problem statement.
Find: Time and distance to achieve 99% of terminal velocity.
ANALYSIS
The equation of motion for the plastic sphere is
/A;
AP= "H9 +. " H>
The drag force can is expressed as
H9 =1
2#;2-9
0
4A2 =
-9Re
24307A;
The equation of motion becomes
/A;
AP= "
-9Re
24307A; + #0() " #%)(
Dividing through by the mass of the ball gives
A;
AP= "
-9Re
24
187
#0A2; + )(1"
#%#0)
Substituting in the values
A;
AP= "0!0375
-9Re
24; + 1!635
Eq. 11.10 can be rewritten as
-9Re
24= 1 + 0!15Re04687 +
0!0175Re
1 + 4!25× 104Re"1416
This equation can be integrated using the Euler method
;:+1 = ;: +
µA;
AP
¶
:
!P
9:+1 = 9: + 0!5(;: + ;:+1)!P
The terminal velocity is 0.362 m/s. The time to reach 99% of the terminal velocityis 0.54 seconds and travels 14.2 cm .
1038
PROBLEM 11.42
Situation: A small air bubble is rising in a very tall column of liquid—additional detailsare provided in the problem statement.
Find: (a)Acceleration of the bubble.(b)Form of the drag (mostly skin-friction or form).
ANALYSIS
Equating the drag force and the buoyancy force.
H9 = -1(liq.13 = -21
3
AlsoH9 = -9I,#,
2$2 = -312, 2
Eliminating H9 between these two equations yields
, 2 = -41 or , =p-41
As the bubble rises it will expand because the pressure decreases with an increasein elevation; thus, the bubble will accelerate as it moves upward. The drag willbe form drag because there is no solid surface to the bubble for viscous shear stressto act on.
COMMENTS
As a matter of interest, the surface tension associated with contaminateduids createsa condition which acts like a solid surface.
1039
PROBLEM 11.43
Situation: A 120 lbf (534N) skydiver is free-falling at an altitude of 6500 ft (1981m).Maximum drag conditions: -9I = 8 ft2 (0.743 m2)!Minimum drag conditions, -9I = 1 ft
2 (0.0929 m2)!Pressure and temperature at sea level are 14.7 psia (101 kPa) and 60 !F (15 !C).Lapse rate for the U.S. Standard atmosphere is T = 0!00587K$m!
Find: Estimate the terminal velocity in mph.a.) Case A (maximum drag) -9I = 8 ft
2 (0!743m2)!b.) Case B (minimum drag) -9I = 1 ft2 (0!0929m2)!
APPROACH
At terminal velocity, the force of drag will balance weight. The only unknown is uiddensity—this can be found by using the ideal gas law along with the equations fromchapter 3 that describe the US Standard atmosphere. Use SI units throughout.
ANALYSIS
Atmospheric pressure variation (troposphere)
& = &! " T(R " R!)= (288!1K)" (0!00587K$m)× (1981" 0) m= 276!5K
%
%!=
·&! " T(R " R!)
&!
¸ 678
%
101 kPa=
·276!5K
288!1K
¸ 9481(0400587)(287)
so% = 79!45 kPa
Ideal gas law
# =%
"&
=79' 450
287× 276!5= 1!001 kg$m3
Equilibrium
Weight = Drag
Case A
. = -9I#, 202
534N =¡0!743m2
¢ (1!001 kg$m3), 202
1040
Calculations give,B = 37!9m$ s
,B = 84!7 mph for maximum drag conditions
Case B.Since -9I decreases by a factor of 8, the speed will increase by a factor of
&8!
,B = (84!7mph)&8
,B = 240 mph for minimum drag conditions
1041
PROBLEM 11.44
Situation: Assume Stoke’s law is valid for a Reynolds number below 0.5.
Find: Largest raindrop that will fall in the Stokes’ ow regime.
Assumptions: &air = 60!H ; #air = 0!00237 slugs/ft3; 7air = 3!74× 10"7 lbf-sec/ft2!
APPROACH
Apply Stoke’s law and the equilibrium principle.
ANALYSIS
Drag force is
H9 = 307,01
The equilibrium principle is
013(water6
= 307air,01
12(water = 187air,0
Reynolds number limit for Stokes ow
,01$: = 0!5
,0 =0!5 :air1
Combining equations
12(water = 187air
µ0!5 :air1
¶
13 = 97air:air
1(water
Solving for 1
13 =972air
#air(water
=9× (3!74× 10"7)2
0!00237× 62!4= 8!51× 10"12 ft3
1 = 2!042× 10"4 ft= 0.0024 in.
1042
PROBLEM 11.45
Situation: A falling hail stone is described in the problem statement.
Find: Terminal velocity of hail stone.
APPROACH
Apply the ideal gas law, then calculate the drag force and apply the equilibriumprinciple.
ANALYSIS
Ideal gas law# = %$"& = 96' 000$(287× 273) = 1!23 kg/m3
Equilibrium
XH = 0 = H9 ".H9 = .
Substitute for drag force and weight
-9I,#,2$2 = , U_ × 6' 000
Assume -9 = 0!5
0!5× (0A2$4)× 1!23, 2$2 = (1$6)0A3 × 6' 000, =
pA× 1' 000× 16$1!23
, =p5× 16$1!23 = 8!06 m/s
Check Reynolds number
Re = 8!06× 0!005$(1!3× 10"5)= 3100
From Fig. 11-11 -9 = 0!39 so
, = 8!06× (0!5$0!39)1*2
= 9.13 m/s
COMMENTS
The drag coe"cient will not change with further iterations.
1043
PROBLEM 11.46
Situation: The problem statement describes a rock falling in water.
Find: Terminal velocity of the rock.
APPROACH
Apply equilibrium with the drag force and buoyancy force. Use an iterative solutionto nd terminal velocity.
ANALYSIS
Buoyancy force
.air = , (rock35 = , (rock
Hbuoy = (35" 7)= , (water= , × 9790
Solving for (rock and A: (rock = 12' 223 N$m3 and A = 0!1762 m.
Under terminal velocity conditions
H9 + Hbuoy = .
H9 = 35" 28 = 7 N
Drag forceH9 = -9I,#,
20 $2
or
, 20 = 2H9$(-9I,#)
, 20 = 2× 7$(-9 × 0!176220$4× 998)
,0 = 0!575$p-9
Assume -9 = 0!4 so,0 = 0!91 m/s
Calculate the Reynolds number
Re = (, 1$:)
= 0!91(0!176)$10"6
= 1!60× 105
From Fig. 11.11, try -9 = 0!45' ,0 = 0!86 m/s, Re = 1!51 × 105! There will be nochange with further iterations so
, = 0!86 m/s
1044
PROBLEM 11.47
Situation: A drag chute is used to decelerate an airplane–additional details areprovided in the problem statement.
Find: Initial deceleration of aircraft.
Assumptions: Density, # = 0!075 lbm/ft3 = 0!0023 slug$ ft3!
ANALYSIS
Drag forceH9 = -9I,#,
20 $2 =+C
thenC = -9I,#,
20 $(2+)
where + = 20' 000$32!2 = 621!1 slugs. From Table 11.1 -9 = 1!20 .
I, = (0$4)12 = 113!1 ft2
Then
C = 1!20× 113!1× 0!0023× 2002$(2× 621!1)
= 10.5 ft/s2
1045
PROBLEM 11.48
Situation: A paratrooper falls using a parachute—additional details are provided inthe problem statement
Find: Descent rate of paratrooper.
Assumptions: Density, # = 1!2 kg/m3
APPROACH
In equilibrium, drag force balances weight of the paratrooper.
ANALYSIS
Equilibrium
. = H9
Drag Force
H9 = -9I,#, 202
From Table 11.1 -9 = 1!20. Thus
. = H9 = -9I,#,20 $2
,0 =q2.$(-9I,#)
=p2× 900$(1!2× (0$4)× 49× 1!2)
= 5.70 m/s
1046
PROBLEM 11.49
Situation: A weighted wood cylinder falls through a lake (see the problem statementfor all the details).
Find: Terminal velocity of the cylinder.
Assumptions: For the water density, # = 1000 kg/m3!
APPROACH
Apply equilibrium with the drag force and buoyancy force.
ANALYSIS
Buoyancy force
Hbuoy = , (water= 0!80× (0$4)× 0!202 × 9810= 246!5 N
Then the drag force is
H9 = Hbuoy ".= 246!5" 200= 46!5 N
From Table 11-1 -9 = 0!87! Then
46!5 =-9I,#,
20
2or
,0 =
s2× 46!5-9I,#
,0 =
s2× 46!5
0!87× (0$4)× 0!22 × 1000
= 1.84 m/s
1047
PROBLEM 11.50
Situation: A weighted cube falls through water (see the problem statement for all thedetails).
Find: Terminal velocity in water.
Assumptions: Density of water: # = 1000 kg/m3!
ANALYSIS
Drag forceFrom Table 11-1, -9 = 0!81
H9 = -9I,#,20 $2
I, = (2)(2 cos 45!)(2) = 1!41422
Equilibrium
H9 = . " Hbuoy= 19!8" 9' 81023 = 19!8" 9' 810× (10"1)3 = 10 N
10 = (0!81)(1!414× 10"2)(1' 000)(, 20 )$2
,0=1.32 m/s
1048
PROBLEM 11.51
Situation: A helium-lled balloon moves through air (see the problem statement forall the details).
Find: Terminal velocity of the balloon.
Properties: at & = 15!-: #air % 1!22 kg/m3; #He = 0!169 kg/m3
APPROACH
Apply equilibrium with the weight, drag force and buoyancy force.
ANALYSIS
Velocity from drag force,0 = (2H9$(-9I#))
1*2
Equilibrium
Hnet = H9 ".balloon ".helium + Hbuoy = 0
H9 = +0!15" (1$6)013((air " (He)= +0!15" (1$6)0 × (0!50)39!81(#air " #He)
H9 = +0!15" (1$6)0(0!50)3 × 9!81(1!22" 0!169) = "0!52 N
Assume -9 ! 0!40 Then
,0 = ((2× 0!52$(0!40× (0$4)× 0!52 × 1!22))1*2
= 3!29 m/s
Check Re and -9:
Re = , 1$: = 3!29× 0!5$(1!46× 10"5) = 1!13× 105
From Fig. 11-11, -9 ! 0!45 so one additional iteration is necessary.
,0 = 3!11 m/s upward
1049
PROBLEM 11.52
Situation: The balloon from problem 11.51
Find: Time for the balloon to reach 5000m in altitude.
Assumptions: Balloon does not change in size. Negligible e!ects of change in viscositywith temperature.
ANALYSIS
The equation of motion is obtained by equating the mass times acceleration to theforces acting on the balloon.
/A;
AP= "H9 ". + H>
The mass of the balloon is the sum of the mass associated with the “empty” weight,.0' and the helium.
/ =.0
)+ #6(
= #6((1 +.
#6())
The drag force can be expressed as
H9 =1
2#;2-9
0
4A2 =
-9Re
24307A;
The buoyancy force is
H> = #')(
Substituting the values into the equation of motion, we have
/A;
AP= "
-9Re
24307A; "/) + #')(
Dividing through by the mass, we get
A;
AP= "
-9Re
24
187
#6A2
1
H; " ) +
#'#6)1
H
where
H = 1 +.
#6()
The density of helium at 23oC and atmospheric pressure is 0.1643 kg/m3! Substitute
1050
A;
AP= "
-9Re
24
0!0219
3!19; " 9!81(1"
#'0!1643× 3!19
)
A;
AP= "
-9Re
240!00686; " 9!81(1"
#'0!524
) (1)
The value for -9Re/24 is obtained from Eq. 11.10.
-9Re
24= 1 + 0!15Re04687 +
0!0175Re
1 + 4!25× 104Re"1416
The value for the air density is obtained from the relations for a standard atmosphere.
& = 296" 5!87× 10"3M
and
% = 101!3(1"&
294)54823
and the density is obtained from the ideal gas law.
Eq (1) can be integrated using the Euler method:
;:+1 = ;: +
µA;
AP
¶
:
!P
M:+1 = M: + 0!5(;: + ;:+1)!P
The time to climb to 5000 m is 3081 seconds or 51.3 minutes . Other methods maylead to slightly di!erent answers.
1051
PROBLEM 11.53
Situation: A helium-lled balloon moves through air (see the problem statement forall the details).
Find: Terminal velocity of balloon.
APPROACH
Apply equilibrium with the weight, drag force and buoyancy force.
ANALYSIS
Equilibrium
H9 = Hbuoy ".He ".balloon
Substitute buoyancy force and weight
H9 = "0!01 + (1$6)0 × 13((air " (air × 1716$12' 419)H9 = "0!01 + (1$6)0 × 13 × 0!0764(1" 0!138)H9 = "0!010 + 0!0345
= 0!0245 lbf
Also
,0 =q2H9$(-9I,#) =
p2× 0!0245$((0$4)× 0!00237-9)
=p26!3$-9
Assume -9 = 0!40 Then
,0 =p26!3$0!4 = 8!1 ft/s upward
Check Reynolds number and -9!
Re = , 1$: = 8!1× 1$(1!58× 10"4) = 5!1× 104; -9 = 0!50
From Fig. 11-11, -9 = 0!50! Recalculate velocity
,0 =p26!3$0!5 = 7.25 ft/s
No further iterations are necessary.
1052
PROBLEM 11.54
Situation: A man in a boat is pulling up an anchor–additional details are providedin the problem statement.
Find: Tension in rope to pull up anchor.
Assumptions: Density of water: # = 1000 kg/m3!
APPROACH
Apply equilibrium with the tension, weight, drag force and buoyancy force.
ANALYSIS
EquilibriumX
H3 = 0
& ". " H9 " Hbuoy. = 0
Solve for T
& =. + H9 + Hbuoy.
Substitute drag force, buoyancy force, and weight
& = (0$4)× 0!32 × 0!3(15' 000" 9' 810) +-9(0$4)× 0!32 × 1' 000× 1!02$2
From Table 11-1 -9 = 0!90! Then
& = 110 + 31!8 = 141.8 N
1053
PROBLEM 11.55
Situation: The problem statement describes a small spherical pebble falling throughwater.
Find: Terminal velocity of spherical pebble.
Assumptions: Water: : = 10"5 ft2/s. Pebble: (& = 3!0!
APPROACH
Apply equilibrium to balance buoyancy force, weight and drag force. Guess a coe"-cient of drag and iterate to nd the solution.
ANALYSIS
Assume -9 = 0!5
,0 = [((& " (%)(4$3)1$(-9#%)]1*2
,0 = [62!4(3!0" 1)(4$3)× (1$(4× 12))$(0!5× 1!94)]1*2
,0 = 1!891 ft/s
Reynolds number
Re = 1!891× (1$48)$10"5 = 3940
Recalculate the coe"cient of drag. From Fig. 11-11 -9 = 0!39! Then
,0 = 1!891× (0!5$0!38)1*2 = 2.14 ft/s
No further iterations are necessary.
1054
PROBLEM 11.56
Situation: A 10-cm diameter ball (weight is 15 N in air) falls through 10!C water.
Find: Terminal velocity of the ball.
APPROACH
Apply equilibrium with the weight, drag force and buoyancy force.
ANALYSIS
Equilibrium
H9 = . " HbuoyH9 = 15" 9' 810× (1$6)013 = 15" 9' 810× (1$6)0 × 0!13
= 9!86 N
Buoyant force is less than weight, so ball will drop.
9!86 = -9(012$4)× 1' 000, 2$2
, =p9!86× 8$(0-9 × 1' 000× 0!12) = 1!58$
p-9
Assume -9 = 0!4! Then, = 2!50 m/s
Check Reynolds number and -9!
Re = , 1$: = 2!50× 0!1$(1!3× 10"6) = 1!9× 105
From Fig. 11-11 -9 = 0!48! So
, = 1!58$&0!48
= 2.28 m/s downward
1055
PROBLEM 11.57
Situation: A helium-lled balloon is ascending in air (see the problem statement forall the details).
Find: Ascent velocity of balloon..
APPROACH
Apply equilibrium with the weight, drag force and buoyancy force.
ANALYSIS
Equilibrium
0 = ".balloon ".He + Hbuoy " H9H9 = "3 + (1$6)013((air " (He)
= "3 + (1$6)0 × 23 × (air(1" 287$2077)= "3 + (1$6)0 × 8× 1!225(1" 0!138)= "3 + 4!422= 1!422 N
Then drag force
H9 = -9I,#,20 $2
,0 =p1!422× 2$((0$4)× 22 × 1!22-9)
=p0!739$-9
Assume -9 = 0!4 then,0 =
p0!739$0!4 = 1!36 m/s
Check Reynolds number and -9
Re = , 1$: = 1!36× 2$(1!46× 10"5) = 1!86× 105
From Fig. 11-11 -9 = 0!42 so
,0 =p0!739$0!42 = 1.33 m/s upward
No further iterations are necessary.
1056
PROBLEM 11.58
Situation: A spherical meteor (#meteor = 3000 kg$m3) enters the earth’s atmosphere.
Find: Diameter of the meteor.
Properties: Air: % = 20 kPa & = "55!C.
APPROACH
Apply the drag force equation and equilibrium.
ANALYSIS
H9 = .
-9I,#,20
2= .
-9I,c%+2
2= .
! I, =. × 2-9c%+2
From Fig. 11-12 -9 = 0!80
012
4=
. × 2-9c%+2
=(3000013$6)(9!81)× (2)(0!8)(1!4)(20× 103)(12)
0!785412 = 1!37613
so
1 =0!785 4
1!376
= 0.571 m
1057
PROBLEM 11.59
Situation: A sphere is being sized to have a terminal velocity of 0.5 m/s when fallingin water (20!C).The diameter should be between 10 and 20 cm.
Find: Characteristics of sphere falling in water.
APPROACH
Apply equilibrium with the drag force and buoyancy force.
ANALYSIS
Drag force
H9 = -9I,#,20 $2
((& " (%)0A3$6 = -9(0$4)A
2 × 998, 20 $2
Assume -9 = 0!50! Then(& = (93!56$A) + (%
Now determine values of (& for di!erent A values. Results are shown below for a -9of 0.50
A(cm) 10 15 20 Re= , 1$: = 0!5× 0!1$10"6 = 5× 104(&(N/m
3) 10,725 10,413 10,238 -9 = 0!5 O.K.
1058
PROBLEM 11.60
Situation: A rotating sphere is described in the problem statement.
Find: Lift force on the sphere.
APPROACH
Use data shown in Fig. 11.17. Calculate lift force using coe"cient of lift equation.
ANALYSIS
Rotational 0-group.
3J
,0=
(0!15 ft) (50 rad$ s)
3 ft$ s= 2!50
From Fig. 11-17 -E = 0!43
Lift force
HE = -EI,#,20 $2
HE = (0!43)(0$4)(0!32)(1!94)(32)$2
HE = 0.265 lbf
1059
PROBLEM 11.61
Situation: A spinning baseball is thrown from west to east–additional details areprovided in the problem statement.
Find: Direction the baseball will ”break.”
ANALYSIS
It will ”break” toward the north. The correct answer is a) .
1060
PROBLEM 11.62
Situation: A rotating baseball is described in the problem statement.
Find: (a) Lift force on the baseball.(b) Deection of the ball from its original path.
Properties: From table A.3, # = 0!0023 slugs/ft3!
Assumptions: Axis of rotation is vertical, standard atmospheric conditions (& =70!H )!.
ANALYSIS
Rotational parameter
,0 = 85 mph = 125 ft/s
3J$,0 = (9$(12× 20))× 35× 20$125 = 0!21
From Fig. 11-17 -E = 3× 0!05 = 0!15Lift force
HE = -EI#,20 $2
= 0!15× (9$120)2 × (0$4)× 0!0023× 1252$2= 0.121 lbf
Deection will be i = 1$2 CP2 where C is the acceleration
C = HE$+
P = 2$,0 = 60$125 = 0!48 s
C = HE$+ = 0!121$((5$16)$(32!2)) = 12!4 ft/s2
Theni = (1$2)× 12!4× 0!482 = 1.43 ft
1061
PROBLEM 11.63
Situation: A circular cylinder in a wind tunnel is described in the problem statement.
Find: Force vector required to hold the cylinder in position.
APPROACH
Apply lift force and drag force.
ANALYSIS
Correct choice is force vector a) .
1062
PROBLEM 11.64
Situation: Air speed is being determined in a popcorn popper.Additional information is provided in problem statement.
Find: Range of airspeeds for popcorn popper operation.
Properties: Air properties from Table A.3 at 150!C # = 0!83 kg/m3 and : =2!8× 10"5 m2$s.
ANALYSIS
Before corn is popped, it should not be thrown out by the air. Thus, let
,max =
s2H9
-9I,#air
where H9 is the weight of unpopped corn
H9 = /)
= 0!15× 10"3 × 9!81= 1! 472× 10"3N
The cross-section area of the kernels is
I, = (0$4)× (0!006)2 m2
= 2!83× 10"5m2
Assume -9 w 0!4! Then
,max =
s2H9
-9I,#air
=
r2× 1! 472× 10"3
0!4× 2!83× 10"5 × 0!83= 17.7 m/s
Check Reynolds number and -9:
Re =, 1
:
=17!7× 0!0062!8× 10"5
= 3800
From Fig. 11-11 -9 % 0!4 so solution is valid.
1063
For minimum velocity let popped corn be suspended by stream of air. Assume onlythat diameter changes. So
,min = ,max × (IT$I,)1*2
= ,max1T1,
where1, = diameter of popped corn and1T = diameter of unpopped corn17!7¡6mm18mm
¢=
5! 9
,min w ,max1T1,
= 17!7
µ6mm
8mm
¶
,min=5.9m/ s
1064
PROBLEM 11.65
Situation: Wind loads act on a ag pole that is carrying an 6 ft high American Flag.
Find: Determine a diameter for the pole.
Assumptions: The failure mechanism is yielding due to static loading.
ANALYSIS
An American ag is 1.9 times as long as it is high. Thus
I = 62 × 1!9 = 68!4 ft2
Assume
& = 60!H' # = 0!00237 slugs/ft3
,0 = 100 mph = 147 ft/s
Compute drag force on ag
H9 = -9I#,20 $2
= 0!14× 68!4× 0!00237× 1472$2= 244 lbf
Make the ag pole of steel using one size for the top half and a larger size for thebottom half. To start the determination of A for the top half, assume that the pipediameter is 6 in. Then
Hon pipe = -9I,#,20 $2
Re = , 1$: = 147× 0!5$(1!58× 10"4)= 4!7× 105
With an Re of 4!7×105' -9 may be as low as 0.3 (Fig. 11-5); however, for conservativedesign purposes, assume -9 = 1!0! Then
Hpipe = 1× 50× 0!5× 0!00237× 1472$2 = 640 lbf+ = 244× 50× 12 + 640× 25× 12 = 338' 450 in.-lbf
Assume that the allowable stress is 30' 000 psi.
V
Z=
+
Omax
=338' 450
30' 000
= 11!28 in3
From a handbook it is found that a 6 in. double extra-strength pipe will be ade-quate.
1065
Bottom half, Assume bottom pipe will be 12 in. in diameter.
Hag = 224 lbf
H6 in.pipe = 640 lbf
H12 in.pipe = 1× 50× 1× 0!00237× 1472$2= 1' 280 lbf
+ = 12(244× 100 + 640× 75 + 1' 280× 25)= 1' 253' 000 in.-lbf
+& = 41!8 in.3 = V$Z
Handbook shows that 12 in. extra-strength pipe should be adequate.
COMMENTS
Many other designs are possible.
1066
PROBLEM 11.66
Situation: A plate is angled 30! relative to the direction of an approaching ow. Apressure distribution is specied in the problem statement.
Find: Lift coe"cient on plate.
ANALYSIS
Force normal to plate will be based upon the -,Inet' where -,Inet is the average net -,producing a normal pressure on the plate. For example, at the leading edge of theplate the -,Inet = 2!0+1!0 = 3!0! Thus, for the entire plate the average net -, = 1!5!
Then
Hnormal to plate = -,InetIplate#,20 $2
= 1!5Iplate#,20 $2
The force normal to ,0 is the lift force.
HE = (Hnormal to plate)(cos 30!)
-E6#,20 $2 = (1!5)(Iplate)(#,
20 $2) cos 30
!
-E = 1!5 cos 30! = 1.30
based on plan form area. However if -E is to be based upon projected area where
Iproj = Iplate sin 30! then
-E=2.60
1067
PROBLEM 11.67
Situation: An airplane wing has a chord of 4 ft. Air speed is ,! = 200 ft$ s!The lift is 2000 lbf. The angle of attack is 3!!The coe"cient of lift is specied by the data on Fig. 11.23.
Find: The span of the wing.
Properties: Density of air is 0.0024 slug/ft3!
APPROACH
Guess an aspect ratio, look up a coe"cient of lift and then calculate the span. Then,iterate to nd the span.
ANALYSIS
Lift forceFrom Fig. 11-23 assume -E ! 0!60
HE = -EI#, 202
2000 = (0!60)(4>)(0!0024)(2002)
2> = 17!4 ft
>$Z = 17!4$4 = 4!34
From Fig. 11-23, -E = 0!50! Recalculate the span
> = (17!4 ft)
µ0!60
0!50
¶
= 20!9 ft
> = 20!9 ft
1068
PROBLEM 11.68
Situation: A lifting vane for a boat of the hydrofoil type is described in the problemstatement.
Find: Dimensions of the foil needed to support the boat.
ANALYSIS
Use Fig. 11-23 for characteristics; >$Z = 4 so -E = 0!55
HE = -EI#,20 $2
10' 000 = 0!55× 4Z2 × (1!94$2)× 3' 600Z2 = 1!30 ft
Z = 1.14 ft
> = 4Z = 4!56 ft
Use a foil 1.14 ft wide × 4!56 ft long
1069
PROBLEM 11.69
Situation: Two wings, A and B, are described in the problem statement.
Find: Total lift of wing B compared to wing A.
ANALYSIS
-E increases with increase in aspect ratio. The correct choice is (d) .
1070
PROBLEM 11.70
Situation: An aircraft increases speed in level ight.
Find: What happens to the induced drag coe"cient.
ANALYSIS
-9# =-2E
0(>2$6)
In the equation for the induced drag coe"cient (above) the only variable for a givenairplane is -E; therefore, one must determine if -E varies for the given conditions. Ifthe airplane is in level ight the lift force must be constant. Because HE = -EI#, 2$2it is obvious that -E must decrease with increasing , . This would be accomplishedby decreasing the angle of attack. If -E decreases, then Eq. (11.19) shows that -9#also must decrease. The correct answer is (b) .
1071
PROBLEM 11.71
Situation: An airplane wing is described in the problem statement.
Find: (a) An expression for , for which the power is a minimum.(b) , for minimum power
ANALYSIS
.$6 =1
2#-E,
2
or
-E = (2$#)(1$, 2)(.$6)
* = H9,
= (-9! + -2E$0$)(1$2)#,
36
* =1
2#, 36-9! + (4$#
2)(1$, 4). 2$62)(1$(0$))(1
2#, 36)
* =
·1
2, 3-9! + (2$#)(1$(0$, )(.
2$62)
¸6
A*$A, = ((3$2)#, 2-9! " (2$#)(1$(0$, 2))(.$6)2)6
For minimum power A*$A, = 0 so
(3$2)#, 2-9! = (2$#)(1$(0$, 2)(.$6)2
,=£43(.$6)2(1$(0$#2-90))
¤1*4
For # = 1 kg/m3'$ = 10' .$6 = 600 and -9! = 0!2
, =
·4
3(6002)(1$(0 × 10× 12 × 0!02))
¸1*4
= 29.6 m/s
1072
PROBLEM 11.72
Situation: The airstream a!ected by the sing of an airplane is described in the problemstatement.
Find: Show that -9# = -2E$(0$)!
ANALYSIS
Take the stream tube between sections 1 and 2 as a control volume and apply themomentum principle
V
V
Patm
Patm
Patm Patm
y
x
!
For steady ow the momentum equation is
XH3 = /2,23 " /1,13
Also ,1 = ,2 = ,! The only H3, is the force of the wing on the uid in the controlvolume:
H3 = (", sin K) / = (", sin K)#, I= "#, 2I sin K
But the uid acting on the wing in the ? direction is the lift HE and it is the negativeof H3! So
HE = #, 2I sin K
-E = 2HE$(#,26)
Eliminate HE between the two equations yields
-E = 2#, 2I sin K$(#, 26)
-E = 2I sin K$6
= 2(0$4)>2 sin K$6
-E = (0$2) sin K(>2$6)
But sin K ! K for small angles. Therefore
-E = (0$2)K(>2$6)
or
K = 2-E$(0>2$6)
-9##,26$2 = (-E#,
26$2)(K$2)
1073
Eliminating K between the two equations gives
-9##,26$2 = (-E#,
26$2)(-E$(0>2$6))
-9# = -2E$(0$)
1074
PROBLEM 11.73
Situation: The problem statement provides data describing aircraft takeo! and land-ing.
Find: (a)Landing speed.(b) Stall speed.
ANALYSIS
-Emax = 1!40 which is the -E at stall. Thus, for stall
. = -Emax6#,2& $2
= 1!46#, 2& $2
For landing. = 1!26#, 2E$2
But,E = ,& + 8
so. = 1!2I#(,& + 8)
2$2
Therefore
1!2(,& + 8)2 = 1!4, 2&
,& = 99!8 m/s
,E = ,& + 8
,E = 107!8 m/s
1075
PROBLEM 11.74
Situation: An aircraft wing is described in the problem statement.
Find: Total drag on wing and power to overcome drag.
ANALYSIS
Calculate % and then #:
% = %0[&0 " T(R " R0))$&0]D*HF
% = 101!3[(296" (5!87× 10"3)(3' 000))$296](9481*(5487×10"3×287)) = 70!1 kPa
& = 296" 5!87× 10"3 × 3' 000 = 278!4 K
Then
# = %$"&
= 70' 100$(287× 278!4)= 0!877 kg/m3
-E = (HE$6)$(#,20 $2)
= (1' 200× 9!81$20)$(0!877× 602$2)= 0!373
Then
-99 = -2E$(0(>2$6))
= 0!3732$(0$(142$20))
= 0!0045
Then the total drag coe"cient
-9 = -99 + 0!01
= 0!0145
Total wing drag
H9 = -9I,#,20 $2
H9 = 0!0145× 20× 0!877× 602$2
= 458 N
Power
* = 60× 458= 27.5 kW
1076
PROBLEM 11.75
Situation: The problem statement provides data for a Gottingen 387-FB lifting vane.
Find: (a) Speed at which cavitation begins.(b) Lift per unit length on foil.
ANALYSIS
Cavitation will start at point where -, is minimum, or in this case, where
-, = "1!95-, = (%" %0)$(#, 20 $2)
Also%0 = 0!70× 9' 810 Pa gage
and for cavitation
% = %vapor = 1' 230 Pa abs
%0 = 0!7× 9' 810 + 101' 300 Pa abs
So
"1!95 = [1' 230" (0!7× 9' 810 + 101' 300)]$(1' 000, 20 $2)
,0=10.5 m/s
By approximating the -, diagrams by triangles, it is found that -,avg. on the top ofthe lifting vane is approx. -1.0 and -,avg.,b ottom ! +0!45
Thus, !-,avg. ! 1!45! Then
HE = -EI,#,20 $2
HE*length = 1!45× 0!20× 1' 000× (10!5)2$2
HE*length=16,000 N/m
1077
PROBLEM 11.76
Situation: The distribution of -, on the wing section in 11.75 is described in theproblem statement.
Find: Range that -E will fall within.
ANALYSIS
The correct choice is (b) .
1078
PROBLEM 11.77
Situation: The drag coe"cient for a wing is described in the problem statement.
Find: Derive an expression for the -E that corresponds to minimum -9$-E and thecorresponding -E$-9!
ANALYSIS
-9$-E = (-90$-E) + (-E$(0$))
A$A-E(-9$-E) = ("-90$-2E) + (1$(0$)) = 0
-E =p0$-90
-9 = -90 + 0$-90$(0$) = 2-90
Then-E$-9 = (1$2)
p0$$-90
1079
PROBLEM 11.78
Situation: A glider at elevation of 1000 m descends to sea level—see the problemstatement for all the details.
Find: Time in minutes for the descent.
ANALYSIS
L = 1' 000$(sin 1!7!) = 33' 708 m
HE = . = (1$2)#, 2-E6
200× 9!81 = 0!5× 1!2× , 2 × 0!8× 20so
, = 14!3 m/s
Then
P = 33' 708 m/(14.3 m/s)
= 2357 s
= 39.3 min
1080
PROBLEM 11.79
Situation: An aircraft wing is described in the problem statement.
Find: Drag force on the wing.
APPROACH
Apply coe"cients for lift and drag forces.
ANALYSIS
Lift force
HE = -E6#, 202
HE$6 = -E#, 202
Thus
#, 202
=HE$6
-E#, 202
=2000N$m2
0!3= 6667N$m2
From Fig. 11-24 at -E = 0!30' -9 % 0!06
Drag force
H9 = -96#, 202
= (0!06)¡10m2
¢ ¡6667N$m2
¢
= 4000 N
1081
PROBLEM 11.80
Situation: The problem statement describes an ultralight airplane.
Find: (a) Angle of attack.(b) Drag force on wing.
ANALYSIS
Lift force
. = -E6#,20 $2
-E = .$(6#, 20 $2) = (400)$((200)(0!002)(502)$2) = 0!80
From Fig. 11-23 -9 = 0!06 andT = 7!
The drag force is
H9 = -96#,20 $2
= (0!06)(200)(0!002)(502)$2
= 30 lbf
1082
PROBLEM 11.81
Situation: The parameters for a human-powered aircraft are given in the problemstatement.
Find: Design the human-powered aircraft using the characteristics of the wing in Fig.11.23.
ANALYSIS
There are several ways to address this design problem. One approach would be toconsider the wing area and velocities necessary to meet the power constraint. Thatis,
225 = (0!05 + -9)1
2(0!00238 slugs/ft3), 30 6
Make plots of ,0 versus 6 with -9 as a parameter. Then use the constraint of thelift equaling the weight.
40 + 0!12× 6 = -E1
2(0!00238 slugs/ft3), 20 6
Make plots of ,0 versus 6 with -E as a parameter. Where these curves intersectwould give values where both constraints are satised. Next you can plot the curvefor the pairs of -9 and -E where the curves cross. You can also plot -9 versus -E(drag polar) for the airfoil and see if there is a match. If there is no match, the airfoilwill not work. If there is a match, you should try to nd the conguration that willgive the minimum weight.
1083
PROBLEM 12.1
Situation: A sound wave travels in methane at 0 !C!
Find: Speed of wave.
ANALYSIS
Speed of sound
Z =&c"&
=&1!31× 518× 273Z = 430 m/s
1084
PROBLEM 12.2
Situation: A sound wave travels in helium at 50 !C.
Find: Speed of wave.
ANALYSIS
Speed of sound
Z =&c"&
=p1!66× 2077× (50 + 273)
Z = 1055 m/s
1085
PROBLEM 12.3
Situation: A sound wave travels in hydrogen at 68 !F.
Find: Speed of wave.
ANALYSIS
Speed of sound
Z =&c"&
=p1!41× 24' 677× (460 + 68)
Z = 4286 ft/s
1086
PROBLEM 12.4
Situation: A sound wave travels in helium and another in nitrogen both at 20 !C.
Find: Di!erence in speed of sound.
ANALYSIS
Speed of sound
ZHe =p(c")He&
=&1!66× 2077× 293
= 1005 m/s
ZN2 =p(c")N2&
=&1!40× 297× 293
= 349 m/s
ZHe " ZN2 = 656 m/s
1087
PROBLEM 12.5
Situation: A sound wave travels in an ideal gas.
Find: Speed of sound for an isothermal process.
ANALYSIS
Z2 = [%$[#; % = #"&
If isothermal, &=const.
! [%$[# = "&
! Z2 = "&
Z =&"&
1088
PROBLEM 12.6
Situation: The relationship between pressure and density for sound travelling througha uid is described in the problem statement.
Find: Speed of sound in water.
ANALYSIS
%" %! = N? ln(#$#!)
Z2 =[%
[#=N@#
Z =pN@$#
Z =p2!20× 109$103
Z = 1483 m/s
1089
PROBLEM 12.7
Situation: An aircraft ying in air at Mach 1!5 is described in the problem statement.
Find: (a) Surface temperature.(b) Airspeed behind shock.
Properties: (a) FromTable A.1 at+1 = 1!5 ' &$&5 = 0!6897; . +2 = 0!7011' &2$&1 =1!320. (b) Air (Table A.2) c = 1!4 and " = 287 J/kg/K.
ANALYSIS
Total temperature will develop at exposed surface
&
&5= 0!6897
&5 =(273" 30)0!6897
= 352!3K = 79!2 !C
Temperature (behind shock)
&2&1
= 1!320
&2 = 1!320× (273!15" 30)= 320!96K
Speed of sound (behind shock)
Z2 =pc"&2
=p(1!4) (287) 320!96
= 359!1m$ s
Mach number (behind shock)
+2 =,2Z2
,2 = Z2+2
= (359!1) (0!7011)
= 251! 77m$ s
,2 = 252m$ s = 906 km$h
1090
PROBLEM 12.8
Situation: A ghter is ying at Mach 2 though air at 273 !F.
Find: Temperature on nose.
Properties: From Table A.1 &$&5 = 0!5556 at + = 2!0
ANALYSIS
&5 = (1$0!5556)(273)
&5 = 491K = 218!C
1091
PROBLEM 12.9
Situation: An aircraft is ying at Mach 1.8 through air at 10000m, 30!5 kPa, and"44 !C.
Find: (a) Speed of aircraft.(b) Total temperature.(c) Total pressure.(d) Speed for + = 1!
ANALYSIS
Speed of sound (at 10,000 m)
Z =&c"&
Z =p(1!40)(287)(229)
Z = 303!3m$ s
Mach number
, = (1!8)(303!3)(3' 600$1' 000)
= 1' 965 km/hr
Total temperature
&5 = 229(1 + ((1!4" 1)$2)× 1!82)= 377< = 104 oC
Total pressure
%5 = (30!5)(1 + 0!2× 1!82)(144*(144"1))
= 175 kPa
Mach number
+ = 1; , = 1× Z = Z, = (303!3)(3' 600$1' 000)
= 1092 km/hr
1092
PROBLEM 12.10
Situation: An airplane is travelling at sea level—additional details are provided in theproblem statement.
Find: Speed of aircraft at altitude where & = "40oC.
APPROACH
Apply the Mach number equation and the speed of sound equation.
ANALYSIS
At sea levelSpeed of sound (sea level)
Z =&c"&
=p(1!4)(287)(288)
= 340!2 m/s
Mach number(sea level)
, = 800 km/hr = 222!2 m/s
+ = 222!2$340!2 = 0!653
Speed of sound (at altitude)
Z =p(1!4)(287)(233)
= 306!0 m/s
Mach number (at altitude)
, = +Z
= 0!653× 306, = 200m$ s = 719 km$h
1093
PROBLEM 12.11
Situation: An aircraft ying through air is described in the problem statement.
Find: Wing loading.
ANALYSIS
Kinetic pressure
^ = (c$2)%+2
= (1!4$2)(30)(0!95)2
= 18!95 kPa
Lift force
HE = -E^6
. = HE$6 = -E^
= (0!05)(18!95)
= 0!947 kPa
. = 947 Pa
1094
PROBLEM 12.12
Situation: An object immersed in airow is described in the problem statement.
Find: (a) Pressure.(b) Temperature at stagnation point.
ANALYSIS
Speed of sound
Z =&c"&
=p(1!4)(287)(293)
= 343 m/s
Mach number
+ = 250$343
= 0!729
Total propertiesTemperature
&5 = (293)(1 + 0!2× (0!729)2)= 293× 1!106= 324 K
&5 = 51!C
Pressure
%5 = (200)(1!106)345
%5 = 284!6 kPa
1095
PROBLEM 12.13
Situation: An airow through a conduit is described in the problem statement.
Find: Mass ow rate through conduit.
APPROACH
Apply the ow rate equation, the ideal gas law, Mach number, speed of sound, andthe total properties equations.
ANALYSIS
Total temperature equation
& =&5¡
1 + ["12+2¢
=283!15K¡
1 +¡144"12
¢0!752
¢
= 254!5K
Total pressure equation
% =%5
¡1 + ["1
2+2¢ ::"1
=360 kPa
¡1 +
¡144"12
¢0!752
¢ 144144"1
= 247!9 kPa
Speed of sound
Z =&c"&
Z =p(1!4)(287)(254!5)
= 319!8m$ s
Mach number
, = +Z
, = (0!75)(319!8)
= 239!9 m/s
Ideal gas law
# =%
"&
=247!9× 103
287× 254!5= 3!394 kg/m3
1096
Flow rate equation
/ = , #I
= (239!9)(3!394)(0!0050)
/ = 4!07 kg/s
1097
PROBLEM 12.14
Situation: Oxygen ows through a reservoir—additional details are provided in theproblem statement.
Find: (a) Velocity.(b) Pressure.(c) Temperature.
ANALYSIS
Total properties
&5 = 200!C = 473 K
& = 473$(1 + 0!2× 0!92)= 473$1!162
& = 407 K
%5 = 300 kPa
% = 300$(1!162)345
% = 177!4 kPa
Speed of sound
Z =&c"&
Z = [(1!4)(260)(407)]1*2
= 384!9 m/s
Mach number
, = +Z
= (0!9)(384!9)
, = 346!4 m/s
1098
PROBLEM 12.15
Situation: High Mach number ow from a reservoir—additional details are providedin the problem statement.
Find: Mach number condensation will occur.
APPROACH
Apply total temperature equation setting the & to 50K and &5 to 300K.
ANALYSIS
Total temperature equation
&0$& = 1 + ((c " 1)$2)+2
300$50 = 6 = 1 + 0!2+2
+ = 5
1099
PROBLEM 12.16
Situation: Hydrogen ow from a reservoir—additional details are provided in the prob-lem statement.
Find: (a) Temperature.(b) Pressure.(c) Mach number.(d) Mass ow rate.
ANALYSIS
&5 = 20oC = 293 K
*5 = 500 kPa
Z,& + ,2$2 = Z,&0
& = &5 " , 2$(2Z,)= 293" (250)2$((2)(14' 223))
& = 290!8 K
Speed of sound
Z =&c"&
=p(1!41)(4' 127)(290!8)
= 1' 301 m/s
Mach number
+ = 250$1301
= 0!192
Total properties (pressure)
% = 500$[1 + (0!41$2)× 0!1922](1441*0441)
% = 487!2 kPa
Ideal gas law
# = %$"&
= (487!2)(103)$(4' 127× 290!8)= 0!406 kg/m3
Flow rate equation
/ = #I,
= (0!406)(0!02)2(0$4)(250)
/ = 0!032 kg/s
1100
PROBLEM 12.17
Situation: A sphere in a Mach-2.5 wind tunnel is described in the problem statement.
Find: Drag on the sphere.
ANALYSIS
% = %5$[1 + ((c " 1)$2)+2][*(["1)
= 600$[1 + 0!2(2!5)2]345
= 35!1 kPa
(1$2)#\2 = c%+2$2
= 1!4× 35!1× 2!52$2= 153!6 kPa
Drag force
H9 = -9(1$2)#\2I
= (0!95)(153!6× 103)(0!02)2(0$4)
H9 = 45!8 N
1101
PROBLEM 12.18
Situation: Eq. 12.27
Find: (a) Expression for pressure coe"cient.(b) Values for pressure coe"cient
ANALYSIS
%5 = (%)[1 + (c " 1)$2×+2]([*(["1))
-, = (%5 " %)#\2$2= (%5 " %)$c%+2$2
= (2$c+2)[(%5$%)" 1]
-, = 2$(c+2)[(1 + (c " 1)+2$2)([*(["1)) " 1]
-,(2) = 2!43
-,(4) = 13!47
-,inc. = 1!0
1102
PROBLEM 12.19
Situation: With low velocities, one can write %5$% = 1 + hAdditional details are provided in the problem statement.
Find: Show that Mach number goes to zero as j goes to zero, and that Eq. 12.32reduces to + = [(2$c)(%5$%" 1)]1*2
ANALYSIS
%5$% = [1 + (c " 1)+2$2][*(["1)
+ =q(2$(c " 1))[(%5$%)(["1)*[ " 1]
%5$% = 1 + h; (%5$%)(["1)*[ = (1 + h)(["1)*[ = 1 + ((c " 1)$c)h+ 0(h2)
(%5$%)(["1)*[ " 1 w ((c " 1)$c)h+ 0(h2)
Neglecting higher order terms
+ = [(2$(c " 1))((c " 1)$c)h]1*2
+ = [(2$c)(%5$%" 1)]1*2 as h$ 0
1103
PROBLEM 12.20
Situation: A normal shock wave is described in the problem statement.
Find: (a) Mach number.(b) Pressure downstream of wave.(c) Temperature downstream of wave.(d) Entropy increase.
ANALYSIS
Speed of sound
Z1 =&c"&
=p(1!4)(297)(223)
= 304!5 m/s
Mach number
+1 = ,$Z
= 500$304!8
= 1!64
Normal shock wave (Mach number)
+22 = [(c " 1)+2
1 + 2]$[2c+21 " (c " 1)]
= [(0!4)(1!64)2 + 2]$[(2)(1!4)(1!64)2 " 0!4]+2 = 0!657
Normal shock wavePressure ratio
%2 = %1(1 + c1+21 )$[(1 + c1+
22 )]
= (70)(1 + 1!4× 1!642)$(1 + 1!4× 0!6572)
%2 = 208 kPa
Temperature ratio
&2 = &1(1 + ((c " 1)$2)+21 )$(1 + ((c " 1)$2)+
22 )
= 223[1 + 0!2× 1!642]$[1 + 0!2× 0!6572]&2 = 316K = 43
!C
Entropy
!9 = "LQ[(%1$%2)(&2$&1)[*(["1)]
= "[LQ(%1$%2) + (c$(c " 1))LQ(&2$&1)]= 297[LQ(70$208) + 3!5LQ(315$223)]
!9 = 35!6 J/kg K
1104
PROBLEM 12.21
Situation: A normal shock wave is described in the problem statement.
Find: (a) Mach number downstream of shock wave.(b) Pressure downstream of shock wave.(c) Temperature downstream of shock wave.
ANALYSIS
Mach number (downstream)
+22 = [(c " 1)+2
1 + 2]$[2c+21 " (c " 1)]
+2 = 0!577
Temperature ratio
(&2$&1) = [1 + ((c " 1)$2)+21 ]$[1 + ((c " 1)$2)+
22 ]
= (1 + (0!2)(4))$(1 + (0!2)(0!577)2) = 1!688
&2 = 505× 1!69&2 = 851!7
!R = 392 !F
Pressure ratio
%2$%1 = (1 + c+21 )$(1 + c+
22 )
= (1 + 1!4× 4)$(1 + 1!4× (0!577)2)= 4!50
%2 = (4!50)(30)
%2 = 135 psia
1105
PROBLEM 12.22
Situation: A normal shock wave is described in the problem statement.
Find: Mach number
APPROACH
Find pressure ratios and apply the compressible ow tables.
ANALYSIS
%52$%1 = 150$40 = 3!75 = (%52$%51)(%51$%1)
Using compressible ow tables:
+ %52$%51 %1$%51 %52$%11.60 0.8952 0.2353 3.801.50 0.9278 0.2724 3.401.40 0.9582 0.3142 3.041.35 0.9697 0.3370 2.87
pt2
p1
Therefore, interpolating, + = 1!59
1106
PROBLEM 12.23
Situation: A shock wave is described in the problem statement.
Find: (a)The downstream Mach number.(b) Static pressure.(c) Static temperature.(d) Density.
Properties: From Table A.2 c = 1!31
APPROACH
Apply the Normal shock wave equations to nd Mach number, pressure, and temper-ature. Apply the ideal gas law to nd density.
ANALYSIS
Normal shock waveMach number
+22 = [(c " 1)+2
1 + 2]$[2c+21 " (c " 1)]
= ((0!31)(9) + 2)$((2)(1!31)(9)" 0!31) =0!2058
+2 = 0!454
Pressure ratio
%2$%1 = (1 + c+21 )$(1 + c+
22 )
= (1 + 1!31× 9)$(1 + 1!31× 0!2058) = 10!07
%2 = 1' 007 kPa, abs
Temperature ratio
&2$&1 = [1 + ((c " 1)$2)+21 ]$[1 + ((c " 1)$2)+
22 ]
= 2!32
&2 = (293)(2!32)
&2 = 680K = 407!C
Ideal gas law
#2 = %2$("&2)
= (1' 007)(103)$((518)(680))
#2 = 2!86 kg/m3
1107
PROBLEM 12.24
Situation: A shock wave is described in the problem statement.
Find: Velocity upstream of wave
Properties: From Table A.2 c = 1!66; " = 2' 077 J/kg/K.
ANALYSIS
Normal shock waveMach number
+21 = [(c " 1)+2
2 + 2]$[2c+22 " (c " 1)]
= 1!249
+1 = 1!12
Temperature ratio
&1$&2 = [1 + ((c " 1)$2)+22 ]$[1 + ((c " 1)$2)+
21 ]
= 0!897
&1 = (0!897)(373) = 335 K
Speed of sound
Z1 =&c"&
= (1!66× 2' 077× 335)1*2
Z1 = 1' 075 m/s
Mach number
,1 = Z1+1
= (1' 075)(1!12)
,1 = 1' 204 m/s
1108
PROBLEM 12.25
Situation: A normal shock wave is described in the problem statement.
Find: (a) Lowest Mach number possible downstream of shock wave(b) Largest density ratio possible(c) Limiting values of +2 and #2$#1 for air.
ANALYSIS
+22 = ((c " 1)+
21 + 2)$(2c+
21 " (c " 1))
Because
+1 FF 1' (c " 1)+21 À 2
2c+21 À (c " 1)
So in limit
+22 $ ((c " 1)+2
1 )$2c+21 = (c " 1)$2c
! +2 $p(c " 1)$2c
#2$#1 = (%2$%1)(&1$&2)
= ((1 + c+21 )$(1 + c+
22 ))(1 + ((c " 1)$2)+
22 )$(1 + ((c " 1)$2)+
21 )
in limit +22 $ (c " 1)$2c and +1 $,
! #2$#1 $ [(c+21 )$((c " 1)$2)+
21 ][(1 + (c " 1)
2$4c)$(1 + c(c " 1)$2c)]#2$#1 $ (c + 1)$(c " 1)+2(air) = 0!378
#2$#1(air) = 6!0
1109
PROBLEM 12.26
Situation: A weak shock wave is described in the problem statement.
Find: (a) Approximation for Mach number downstream of wave.(b) Compare+2 computed with equation from (a) with values in table A.1 for+1 = 1'1!05' 1!1' and 1!2.
ANALYSIS
+22 = [(c " 1)+2
1 + 2]$[2c+21 " (c " 1)]
= [(c " 1)(1 + h) + 2]$[2c(1 + h)" (c " 1)] = [c + 1 + (c " 1)h]$[c + 1 + 2ch]= [1 + (c " 1)h$(c + 1)]$[1 + (2ch)$(c + 1)]! [1 + (c " 1)h$(c + 1)][1" (2ch)$(c + 1)]! 1 + (c " 1" 2c)h$(c + 1)! 1" h! 1" (+2
1 " 1)! 2"+2
1
+1 +2 +2 (Table A-1)1.0 1.0 1.01.05 0.947 0.9531.1 0.889 0.9121.2 0.748 0.842
1110
PROBLEM 12.27
Situation: A truncated nozzle is described in the problem statement.Inputs: total pressure, total temperature, back pressure, ratio of specic heats, gasconstant, and nozzle diameter.
Find: (a) Develop a computer program for calculating the mass ow.(b) Compare program with Example 12.12 with back pressures of 80' 90' 100' 110'120' and 130 kPa and make a table.
ANALYSIS
The computer program shows the ow is subsonic at the exit and the mass ow rateis 0.239 kg/s. The ow rate as a function of back pressure is given in the followingtable.
Back pressure, kPa Flow rate, kg/s80 0!24390 0!242100 0!239110 0!229120 0!215130 0!194
COMMENTS
One notes that the mass ow rate begins to decrease more quickly as the back pressureapproaches the total pressure.
1111
PROBLEM 12.28
Situation: A truncated nozzle is described in the problem statement.
Find: Mass ow rate
ANALYSIS
I- = 3 cm2 = 3× 10"4 m2
%5 = 300 kPa; &5 = 20! = 293 K
%0 = 90 kPa
%0$%5 = 90$300 = 0!3
Because %0$%5 G 0!528' sonic ow at exit.
Laval nozzle ow rate equation
/ = 0!685%5I&$p"&5
= (0!685)(3× 105)(3× 10"4)$p(287)(293)
/ = 0!212 kg/s
1112
PROBLEM 12.29
Situation: A truncated nozzle is described in the problem statement.
Find: (a)Mass ow rate of methane.(b) Mass ow rate if Bernoulli equation is valid.
Properties: From Table A.2 c = 1!31; " = 518 J/kgK.
ANALYSIS
I- = 3 cm2 = 3× 10"4m2
I, = 12 cm2 = 12× 10"4m2
%5 = 150 kPa; &5 = 303 K
%0 = 100 kPa;
%0$%5 = 100$150 = 0!667
%&$%5|methane = (2$(c + 1))[*(["1) = 0!544
%0 F %&' subsonic ow at exit
Mach number
+G =q(2$(c " 1))[(%5$%0)(["1)*[ " 1]
=p6!45[(1!5)042366 " 1]
= 0!806
Temperature
&G = 303 K$(1 + (0!31$2)× (0!806)2)= 275 K
Speed of sound
ZG =pc"&G
=p(1!31)(518)(275)
= 432 m/s
Ideal gas law
#G = %0$("&G)
= 100× 103$(518× 275)= 0!702 kg/m3
1113
Flow rate equation
/ = #G,GI-
= (0!702)(0!806)(432)(3× 10"4)
/ = 0!0733 kg/s
Assume the Bernoulli equation is valid,
%5 " %0 = (1$2)#, 2G
,G =p2(150" 100)103$0!702
= 377 m/s
/ = (0!702)(377)(3× 10"4)
/ = 0!0794 kg/s
Error = 8!3% (too high)
1114
PROBLEM 12.30
Situation: A truncated nozzle is described in the problem statement.
Find: The total pressure.
ANALYSIS
Speed of sound
ZG =pc"&G
=p(1!4)(287)(283)
= 337 m/s
Ideal gas law (assume sonic ow at the exit so %G = 100 kPa)
#G = %G$"&G
= 100× 103$(287× 283)= 1!23 kg/m3
Flow rate equation
/ = #GIGZG
= (1!23)(4× 10"4)(337)= 0!166 kg/s
Because the mass ow is too low, ow must exit sonically at pressure higher than theback pressure.
Flow rate equation
#G =/
ZGIG
=0!30
337× (4× 10"4)= 2!226 kg/m3
Ideal gas law
%G = #G"&G
= 2! 226× 287× 283 = 1! 808× 105 Pa
Then%5%G
= ((c + 1)$2)[*(["1)
= (1!2)345 = 1!893
%5 = 1!893× 1! 808× 105 Pa%5 = 3! 423× 105 Pa
%5 = 342 kPa
1115
PROBLEM 12.31
Situation: A truncated nozzle is described in the problem statement.
Find: Mass ow rate of helium.
Properties: From Table A.2 c = 1!66!
ANALYSIS
(a) %5 = 130 kPaIf sonic at exit,
%& = [2$(c + 1)][*(["1)%5
= 0!487× 130 kPa= 63!3 kPa
Flow must exit subsonicallyTotal propertiesFind Mach number
+2G = (2$(c " 1))[(%5$%0)(["1)*[ " 1]= 3!03[(130$100)044 " 1] = 0!335
+G = 0!579
Temperature
! &G = &5$(1 + ((c " 1)$2)+2)
= 301$(1 + (1$3)(0!335))
= 271K
Ideal gas law
#G = %$"&G
= 100× 103$[(2' 077)(271)]= 0!178 kg/m3
Flow rate equation/ = #GIG,G
Substituting Mach number and Speed of sound equations for ,G
/ = #GIG+G
pc"&G
= (0!178)(12× 10"4)(0!579)p(1!66)(2' 077)(271)
/ = 0!120 kg/s
1116
b)
%5 = 350 kPa
! %& = (0!487)(350) = 170 kPa
! Flow exits sonically
Flow rate equation from (a)
/ = 0!727%5I&$p"&5
= (0!727)(350)103(12× 10"4)$p2' 077× 301
/ = 0!386 kg/s
1117
PROBLEM 12.32
Situation: A truncated nozzle is described in the problem statement.
Find: Pressure required for isokinetic sampling.
Properties: From Table A.2 " = 287 J/kgK; c = 1!4!
ANALYSIS
Ideal gas law
# = %$"&
= 100× 103$(287)(873)= 0!399 kg/m3
Flow rate equation
/ = #, I
= (0!399)(60)(0$4)(4× 10"3)2
/ = 0!000301 kg$ s
Mach number
+ = ,$&c"&
= 60$p(1!4)(287)(873)
= 0!101
Total properties
%5 = (100)[1 + (0!2)(0!101)2]345
= 100!7 kPa
&5 = 875 K
Laval nozzle ow rate equation (assume sonic ow)
/ = 0!685%5I&$p"&5
= 0!685(100!7× 103)(0$4)(2× 10"3)2$p(287)(875)
/ = 0!000432 kg$ s
Thus, ow must be subsonic at constriction and solution must be found iteratively.Assume + at constriction and solve for / in terms of +!
Total properties
#G = #5(1 + ((c " 1)$2)+2)("1*(["1) = #5(1 + 0!2+
2)"245
ZG = Z5(1 + ((c " 1)$2)+2)"1*2 = Z5(1 + 0!2+2)"045
1118
Flow rate/ = #GIGZG+G
Combine equations
/ = IG+G#5Z5(1 + 0!2+2)"3
#5 = (0!399)[1 + (0!2)(0!101)2]245 = 0!401 kg/m3
Speed of sound
Z5 =pc"&5
=p(1!4)(287)(875) = 593 m/s
! / = 7!47× 10"4+(1 + 0!2+2)"3
+ /× 104
0.5 3.220.4 2.710.45 2.980.454 3.0040.455 3.01 (correct ow rate)
! %0 = (100!7)(1 + 0!2× 0!4552)"345
%0 = 87!2 kPa
1119
PROBLEM 12.33
Situation: Inputs of Mach number ratio (run with Mach number of 2) and specicheats (run with 1.4, 1.3 and 1.67).
Find: Develop a computer program that outputs: area ratio, static to total pressureratio, static to total temperature ratio, density to total density ratio, and before andafter shock wave pressure ratio.
ANALYSIS
The following results are obtained from the computer program for a Mach number of2:
I$I& 1!69 1!53 1!88&$&5 0!555 0!427 0!714%$%5 0!128 0!120 0!132#$#5 0!230 0!281 0!186+2 0!577 0!607 0!546%2$%1 4!5 4!75 4!27
1120
PROBLEM 12.34
Situation: Inputs: area ratio (run with 5), specic heats (run with 1.4, 1.67, and1.31), and ow condition.
Find: Develop a computer program that outputs Mach number.
ANALYSIS
The following results are obtained for an area ratio of 5:
c +subsonic +supersonic
1!4 0!117 3!171!67 0!113 3!811!31 0!118 2!99
1121
PROBLEM 12.35
Situation: A supersonic wind tunnel is described in the problem statement.
Find: The area ratio and reservoir conditions.
Properties: From Table A.2 c = 1!4!
ANALYSIS
Mach number-area ratio relationship
I$I& = (1$+)[(1 + ((c " 1)$2)+2)$((c + 1)$2)]([+1)*(2(["1))
= (1$3)[(1 + 0!2× 32)$1!2]3
I$I& = 4!23
From Table A.1, %$%5 = 0!02722; &$&5 = 0!3571
%5 = 1!5 psia $0!0585
=1!5 psia0!02722
%5 = 55!1 psia
&5 =450 !R0!3571
&5 = 1260!R = 800 !F
1122
PROBLEM 12.36
Situation: The design of a Laval nozzle is described in the problem statement.
Find: The nozzle throat area.
Properties: From Table .2 c = 1!4; " = 297 J/kgK.
ANALYSIS
Find Mach number
+G =q(2$(c " 1))[(%5$%G)(["1)*[1]
=p5[(1' 000$30)04286 " 1]
= 2!94
Mach number-area ratio relationship
IG$I& = (1$+)[(1 + ((c " 1)$2)+2)$((c + 1)$2)]([+1)*(2(["1))
= (1$2!94)[(1 + (0!2)(2!94)2)$1!2]3
IG$I& = 4!00
Flow rate equation for Laval nozzle
/ = 0!685%5I-$p"&5
I- = /p"&5$(0!685× %5)
= 5×p(297)(550)$((0!685)(106))
= 0.00295 m2
I- = 29!5 cm2
1123
PROBLEM 12.37
Situation: A rocket nozzle with the following properties is described in the problemstatement.I$I& = 4; %5 = 1!3 MPa = 1!3× 106 Pa; %0 = 35 kPa;c = 1!4.
Find: The state of exit conditions.
ANALYSIS
From Table A1:
+G ! 2!94 =F %G$%5 ! 0!030! %G = 39 kPa
! %G F %0 under expanded
1124
PROBLEM 12.38
Situation: Same as problem 12.37, but the a ratio of specic heats of 1.2.
Find: State of exit conditions.
ANALYSIS
Running the program from Problem 12.33 with c = 1!2 and I$I& = 4 gives %5$% =23!0! Thus the exit pressure is
%G =1!3 MPa23
= 56 kPa
Therefore the nozzle is underexpanded.
1125
PROBLEM 12.39
Situation: A Laval nozzle is described in the problem statement.
Find: (a) Reservoir pressure.(b) Static pressure and temperature at throat.(c) Exit conditions.(d) Pressure for normal shock at exit.
ANALYSIS
a) % = %5 in reservoir because , = 0 in reservoir%$%5 = 0!1278 for I$I& = 1!688 and + = 2 (Table A.1)
%5 = %$0!1278
= 100$0!1278
%5 = 782!5 kPa
b) Throat conditions for + = 1:
%$%5 = 0!5283
&$&5 = 0!8333
% = 0!5283(782!5)
% = 413!4 kPa
& = 0!8333(17 + 273)
= 242K
& = "31 !C
c) Conditions for %5 = 700 kPa:
%$%5 = 0!1278
% = 0!1278(700) = 89!5 kPa =! 89!5 kPa G 100 G kPa
overexpanded exit conditiond) %5 for normal shock at exit:Assume shock exists at + = 2; we know %2 = 100 kPa.From table A.1: %2$%1 = 4!5
%1 = %2$4!5 = 22!2 kPa
%$%5 = 0!1278
%5 = %$0!1278
= 22!2$0!1278
%5 = 173!7 kPa
1126
PROBLEM 12.40
Situation: A Laval nozzle is described in the problem statement.
Find: (a) Mach number.(b) Area ratio.
ANALYSIS
Find Mach number
^ = (c$2)%+2
= (c$2)%5[1 + ((c " 1)$2)+2]"[*(["1)+2
LQ^ = LQ(c%5$2)" (c$(c " 1))LQ(1 + ((c " 1)$2)+2) + 2LQ+
([$[+)LQ^ = (1$^)([^$[+)
= ("c$(c " 1))[1$(1 + ((c " 1)$2)+2)][(c " 1)+ ] + 2$+0 = ["c+ ]$[1 + ((c " 1)$2)+2] + (2$+)
= [("c+2 + 2 + (c " 1)+2)$[(1 + ((c " 1)$2)+2)+ ]
0 = 2"+2
+ =&2
Mach number-area ratio relationship
I$I& = (1$+)[1 + ((c " 1)$2)+2]$[(c + 1)$2]([+1)*2(["1)
= (1$&2)[(1 + 0!2(2))$1!2]3
I$I& = 1!123
1127
PROBLEM 12.41
Situation: A rocket motor is described in the problem statement.
Find: (a) Mach number, pressure and density at exit.(b) Mass ow rate.(c) Thrust.(d) Chamber pressure for ideal expansion.
ANALYSIS
Mach number-area ratio relationship
I$I& = (1$+G)((1 + 0!1×+2G )$1!1)
545 = 4
a) Solve for + by iteration:
+G I$I&3.0 6.732.5 3.422.7 4.452.6 3.902.62 4.0
! +G = 2!62
Total propertiesPressure
%G$%5 = (1 + 0!1× 2!622)"6 = 0!0434! %G = (0!0434)(1!2× 106)
%G = 52!1× 103 Pa
Temperature
&G$&5 = (1 + 0!1× 2!622)"1 = 0!593&G = (3' 273× 0!593)
= 1' 941 K
Ideal gas law
#G = %G$("&G)
= (52!1× 103)$(400× 1' 941)
%G = 0!0671kg/m3
Speed of sound
ZG =&c"&
=p(1!2× 400× 1' 941)
= 965 m/s
1128
Mach number
,G = (965)(2!62)
,G = 2' 528 m/s
b) Flow rate equation
/ = #GIG,G
= (0!0671)(4)(10"2)(2' 528)
/ = 6!78 kg/s
c) Momentum principle
H- = (6!78)(2' 528) + (52!1" 25)× 103 × 4× 10"2
H- = 18!22 kN
d)
%5 = 25$0!0434
%5 = 576 kPa
/ = (25$52!1)(6!78) = 3!25 kg/s
H- = (3!25)(2' 528)
H- = 8!22 kN
1129
PROBLEM 12.42
Situation: A rocket motor design is described in the problem statement.
Find: (a) Nozzle expansion ratio for ideal expansion.(b) Thrust if expansion ratio reduced by 10%.
ANALYSIS
%5$%G = (1 + ((c " 1)$2)+2)[*(["1)
= (1 + 0!1+2)6
+G =q10[(%5$%G)1*6 " 1]
=q10[(2' 000$100)1*6 " 1]
= 2!54
Mach number-area ratio relationship
IG$I& = (1$+G)[(1 + 0!1+2G )$1!1]
545
IG$I& = 3!60
Total properties (temperature)
&G = 3' 300$(1 + (0!1)(2!54)2)
= 2006 K
Ideal gas law
#G = 100× 103$(400× 2' 006)= 0!125 kg/m3
Speed of sound
ZG =p(1!2)(400)(2006)
= 981 m/s
Flow rate equation
/ = #GIG,G
= (0!125)(3!38)(10"3)(981)(2!54)
= 1!053 kg/s
1130
Momentum principle
H- = (1!053)(981)(2!54)
H- = 2624 N
(b)
IG$I& = (0!9)(3!60) = 3!24
3!42 = (1$+G)((1 + 0!1+2G )$1!1)
545
Solve by iteration:
+G I$I&2.4 3.0112.5 3.4202.45 3.2042.455 3.2282.458 3.241
! +G = 2!46
%G$%5 = (1 + 0!1+2G )"6 = 0!0585
%G = (0!0585)(2!0× 106) = 117 kPa&G = 3' 300$(1 + 0!1× 2!462) = 2' 056 K
Speed of sound
ZG =pc"&G
=p(1!2)(400)(2056)
= 993 m/s
Momentum principle
H- = (1!053)(993)(2!46) + (117" 100)× 103 × 3!24× 10"3
H- = 2627 N
1131
PROBLEM 12.43
Situation: A Laval nozzle is described in the problem statement.
Find: Area ratio where shock occurs in nozzle.
ANALYSIS
%0$%5 = 0!5
Solution by iteration:Choose +Determine I$I&
Find %52$%51 = I&1$I&2(IG$I&)2 = 4(I&1$I&2)Find +G
%G$%51 = (%G$%52)(%52$%51) and converge on %G$%51 = 0!5
A T
Ac
1
2
+ I$I& *52$%51 (IG$I&) +G %G$%512 1.69 0.721 2.88 0.206 0.72.5 2.63 0.499 2.00 0.305 0.4682.4 2.40 0.540 2.16 0.28 0.511 ! I$I& = 2!462.43 2.47 0.527 2.11 0.287 0.4972.425 2.46 0.530 2.12 0.285 0.50
1132
PROBLEM 12.44
Situation: A rocket nozzle is described in the problem statement.
Find: Area ratio and location of shock wave.
ANALYSIS
Use same iteration scheme as problem 12-43 but with c = 1!2 to nd I$I& of shock:
%0$%5 = 100$250 = 0!4 IG$I- (8$4)2 = 4
+ I$I& *52$%51 (IG$I&)2 +G %G$%512.0 1.88 0.671 2.68 0.227 0.5682.4 3.01 0.463 1.85 0.341 0.4322.5 3.42 0.416 1.65 0.385 0.380 ! I$I& = 3!252.46 3.25 0.434 1.74 0.366 0.400
From geometry: A = A5 + 2× tan 15!
A$A5 = 1 + (2E$A5) tan 15!
I$I& = (A$A5)2 = 3!25
= [1 + (2E$A5)(0!268)]2
= [1 + (0!536E$A5)]2
! E$A5 = 1!498
E = (1!498)(4)
E = 5!99 cm
15
d t
o
d
x
1133
PROBLEM 12.45
Situation: A normal shock wave occurs in a nozzle—additional details are provided inthe problem statement.
Find: Entropy increase.
Properties: From Table A.2 c = 1!41!
ANALYSIS
I
I&= (1$+)((1 + 0!205×+2)$1!205)24939
Solve iteratively for + (to give I$I& = 4)
+ I$I&2.5 2.612.8 3.453.0 4.162.957 4.0
+1 = 2!957
+22 = ((c " 1)+2
1 + 2)$(2c+21 " (c " 1))
+2 = 0!4799
%2$%1 = (1 + c+21 )$(1 + c+
22 ) = 10!06
%5$%|1 = (1 + ((c " 1)$2)+21 )[*(["1) = 34!20
%5$%|2 = 1!172
%52$%51 = (%52$%2)(%2$%1)(%1$%51) = 0!3449
!9 = " ln(%51$%52) = 4127 ln(1$0!3449)
!9 = 4390 J/kgK
1134
PROBLEM 12.46
Situation: Airow in a channel is described in the problem statement.
Find: (a) Mach number.(b) Static pressure.(c) Stagnation pressure at station 3.
Properties: From Table A.1 + = 2!1' I$I& = 1!837' %$%5 = 0!1094!
ANALYSIS
I& = 100$1!837 = 54!4
%5 = 65$0!1094 = 594 kPa
I2$I& = 75$54!4 = 1!379
+ = 1!74$ %2$%5 = 0!1904$ %2 = 0!1904(594) = 113 kPa
after shock, +2 = 0!630; %2 = 3!377(113) = 382 kPa
I2$I& = (1$+)((1 + 0!2+2)$1!2)3
= 1!155
%5$%2 = (1 + 0!2+2)345 = 1!307
I& = 75$1!155 = 64!9; %5 = 382(1!307) = 499 kPa
I3$I& = 120$64!9 = 1!849; from Table A.1, +3 = 0!336
%3$%5 = 0!9245; %3 = 0!9245(499) = 461 kPa
1135
PROBLEM 12.47
Situation: A shock wave in air is described in the problem statement.+1 = 0!3; I$I& = 2!0351; I& = 200$2!0351 = 98!3 cm2!
Find: Atmospheric pressure for shock position.
ANALYSIS
%$%5 = 0!9395
%5 = 400$0!9395
= 426 kPa
I&$I& = 120$98!3
= 1!2208
By interpolation from Table A.1:
+&1 = 1!562; %1$%5 = 0!2490$ %1 = 0!249(426) = 106 kPa
+&2 = 0!680; %&2$%1 = 2!679$ %&2 = 2!679(106) = 284 kPa
I&$I&2 = 1!1097$ I&2 = 120$1!1097 = 108 cm2
%&2$%52 = 0!7338; %52 = 284$0!7338 = 387 kPa
I2$I&2 = 140$108 = 1!296$+2 = 0!525
%2$%52 = 0!8288
%2 = 0!8288(387)
%2 = 321 kPa
1136
PROBLEM 12.48
Situation: Inputs: b(E"E&)$1 (run for 1, 10, and 100 and c = 1!4) for a compressible,adiabatic ow in a pipe.
Find: Develop a computer program that outputs: Mach number and the ratio ofpressure to the pressure at sonic conditions (%Y$%&).
ANALYSIS
Running the program for initial Mach number given a value of b (E& " E) $1 resultsin
b (E& " E) $1 c = 1!4 c = 1!31+ %Y$%& + %Y$%&
1 0!508 2!10 0!520 2!0210 0!234 4!66 0!241 4!44100 0!0825 13!27 0!0854 12!57
1137
PROBLEM 12.49
Situation: The design of a piping system is described in the problem statement.
Find: Pipe diameter.
Assumptions: +G = 1; %G = 100 kPa; &G = 373(0!8333) = 311 K
ANALYSIS
Speed of sound
ZG =pc"&G
=p1!4(287)311
= 353 m/s
Ideal gas law
#G = 100× 103$(287× 311)= 1!12 kg/m3
Flow rate
I = /$(#, )
= 0!2$(1!12× 353) = 5!06× 10"4 m2 = 5!06 cm2
Solve for 1
1 = ((4$0)I)1*2
= 2!54 cm
Reynolds number
Re = (353× 0!0254)$(1!7× 10"5)= 5!3× 105 $ b = 0!0132
b!E$1 = (0!0132× 10)$0!0254 = 5!20
from Fig. 12.19+1 = 0!302from Fig. 12.20 %$%& = 3!6
%1 = 100(3!6) = 360 kPa F 240 kPa
! Case B
Solve by iteration.
+G &G ZG ,G #G I× 104 Re×10"5 +1 %1$%G0.8 331 365 292 1.054 6.51 4.54 0.314 2.550.7 340 369 259 1.026 7.54 4.11 0.322 2.18
1138
By interpolation, for %1$%G = 2!4' +G = 0!76
&G = 334 K; ZG = 367 m/s; ,G = 279 m/s; #G = 1!042 kg/m3
I = 6!89× 10"4 m2; 1 = 0!0296 mI = 2!96cm
1139
PROBLEM 12.50
Situation: Air entering a steel pipe is described in the problem statement.
Find: (a) Length of pipe for sonic ow.(b) Pressure at pipe exit.
Properties: From Table A.2 " = 1' 716 ft-lbf/slug.
ANALYSIS
& = 67!F = 527!R
Speed of sound
Z =&c"&
=p(1!4)(1' 716)(527)
= 1' 125 ft/sec
+1 = 120$1' 125
= 0!107
Ideal gas law
# = %$"&
= (30× 144)$(1' 716× 527)= 0!00478 slug/ft3
Reynolds number
7 = 3!8× 10"7 lbf-sec/ft2
Re = (120× 1$12× 0!00478)$(3!8× 10"7) = 1!25× 105
From Figs. 10-8 and Table 10.2, b = 0!025
b(E& " EY)$1 = (1"+2)$c+2 + ((c + 1)$2c)LQ[(c + 1)+2$(2 + (c " 1)+2)] = 62!0
! E& " EY = 2 = (62!0)(1$b) = (62!0× 1$12)$0!025 = 207 ft
from Eq. 12.79
%Y$%& = 10!2
%& = 30$10!2
%& = 2!94 psia
1140
PROBLEM 12.51
Situation: Air ows out of a brass tube—additional details are provided in the problemstatement.
Find: Distance upstream where + = 0!2!
Properties: From Table A.2 " = 287 J/kgK.
ANALYSIS
Total properties (temperature
&G = 373$(1 + 0!2× 0!92)= 321 K
Speed of sound
ZG =pc"&G
=p(1!4)(287)(321)
= 359 m/s
Mach number
, = +G$ZG
= (0!9)(359)
= 323 m/s
Ideal gas law
7G = 2!03× 10"5N · s/cm2
# = %$"&G
= (100× 103)$(287× 321) = 1!085 kg/m3
Reynolds number
Re = (323)(1!085)(3× 10"2)$(2!03× 10"5) = 5!18× 105
from Figs. 10-8 and Table 10.2 b = 0!0145
b(E& " E049)$1 = 0!014b(E& " E042)$1 = 14!5
! b(E048 " E042)$1 = 14!49 = b2$1! 2 = (14!49)(3× 10"2)$0!0145
2 = 30!0m
1141
PROBLEM 12.52
Situation: The inlet and exit of a pipe are described in the problem statement.
Find: Friction factor: b !
ANALYSIS
Eq. (12-75)
+ = 0!2
b(EP " E042)$1 = 14!53
+ = 0!6
b(E& " E047)$1 = 0!2
b(E046 " E042)$1 = 14!33
b = 14!33(0!5)$(20× 12)
b = 0!0298
1142
PROBLEM 12.53
Situation: Oxygen owing through a pipe is described in the problem statement.
Find: Mass ow rate in pipe.
Properties: From Table A.2 c = 1!4; " = 260 J/kgK.
Assumptions: Sonic ow at exit.
ANALYSIS
Temperature
&G = 293$1!2
= 244K = "29 !C
Speed of sound
ZG = ,G =p(1!4)(260)(244)
= 298 m/s
Reynolds number
:G w 1× 10"5 m2$s (Fig. A3)Re = (298× 2!5× 10"2)$(1× 10"5) = 7!45× 105
From Figs. 10-8 an Table 10.2, b = 0!024
b(E& " EY)$1 = (10× 0!024)$0!025 = 9!6
From Fig. 12-19 + at entrance = 0.235
%Y$%& = 4!6
%1 = 460 kPa F 300 kPa
Therefore ow must be subsonic at exit so %G$%1 = 100$300 = 0!333! Use iterativeprocedure:
+1(($#"$; )
9Re×105 b b2$1 (($#"$<)
9+G %G$%1
0.20 14.5 6.34 0.024 9.6 4.9 0.31 0.6410.22 11.6 6.97 0.024 9.6 2.0 0.42 0.5160.23 10.4 7.30 0.024 9.6 0.8 0.54 0.4160.232 10.2 7.34 0.024 9.6 0.6 0.57 0.3960.234 10.0 7.38 0.024 9.6 0.4 0.62 0.3660.2345 9.9 7.40 0.024 9.6 0.3 0.65 0.348
1143
For +1 near 0.234, %Y$%& = 4!65
%G$%& = (%Y$%&)(%G$%Y)
%G$%& = (4!65)(0!333) = 1!55
which corresponds to +G = 0!68
Total temperature
&G = 293$(1 + (0!2)(0!68)2)
= 268 K
Speed of sound
ZG =pc"&G
=p(1!4)(260)(268)
= 312 m/s
,G = 212 m/s
Ideal gas law
# = %$"&G
= 105$(260× 268)= 1!435 kg/m3
Flow rate equation
! / = (1!435)(212)(0$4)(0!025)2
/ = 0!149kg/s
1144
PROBLEM 12.54
Situation: Same as 12.53.
Find: Mass ow rate in pipe.
ANALYSIS
From the solution to prob. 12.53, we know ow at exit must be sonic since %1 F 460kPa. Use an iterative solution. Guess b = 0!025
b(E& " EY)$1 = 10
+ = 0!23
&5 = 293$(1 + 0!2(0!23)2) = 290 K
Z1 =p(1!4)(290)(260) = 325 m/s
#1 = (500× 103)$(260× 290) = 6!63 kg/m3
Assuming 7 not a function of pressure
71 = 1!79× 10"5N · s/m2
Re = (0!23)(325)(6!63)(2!5× 10"2)$(1!79× 10"5) = 6!9× 105
From Fig. 10.8 and Table 10.2b = 0!024
Try
b = 0!024
b(E& " EY)$1 = 9!6; + = 0!235; &5 w 290 KZ1 = 325 m/s; #1 = 6!63 kg/m
3; 71 w 1!79× 10"5 N · s/m2;Re = 7× 105
gives same b of 0.024. For + = 0!235' %Y$%& = 4!64
%& = 107!8 kPa
&G = 293$1!2 = 244 K
ZG = 298 m/s
#G = (107!8× 103)$(260× 244) = 1!70 kg/m3
! / = (1!70)(298)(0$4)(0!025)2
/ = 0!248 kg/s
1145
PROBLEM 12.55
Situation: A pressure hose connected to a regulator valve is described in the problemstatement.
Find: Hose diameter.
Assumptions: +G = 1; %G = 7 psia.
ANALYSIS
Speed of sound
&G = 560(0!8333) = 467!"
ZG =pc"&G
=p1!4(1' 776)467 = 1' 077 ft/s
Ideal gas law
#G = %$"&
= 7(144)32!2$(1' 776× 467)= 0!039 lbm/ft3
Flow rate equation
I = /$(#, )
= 0!06$(0!039× 1' 077)= 1!43× 10"3 ft2
1 = 0!0427 ft = 0!51 in.
Reynolds number
Re = (1' 077)(0!0427)(0!039)$(1!36× 10"7 × 32!2) = 4!1× 105
c&$1 = 0!0117; b = 0!040
b!E$1 = (0!04× 10)$0!0427 = 9!37
From Fig. 12-19 +1 = 0!24! From Fig. 12-20, %1$%& = 4!54
%1 = 31!8 psia G 45 psia
Therefore Case D applies so + = 1 at exit and %G F 7 psia.Solve by iteration:
+1 &1 ,1 #1 1 Re×10"5 b +1 %G0.24 553 281 0.212 0.0358 1.62 0.040 0.223 9.160.223 554 262 0.212 0.0371 1.56 0.040 0.223 9.16
1 = 0!0371 ft1 = 0!445 in
1146
PROBLEM 12.56
Situation: The design of an air blower and pipe system is described in the problemstatement.
Find: (a)Pressure.(b) Velocity.(c) Density at pipe inlet.
Assumptions: Viscosity of particle-laden ow is same as air.
ANALYSIS
Speed of sound
Z =pc"&G
=p1!4(287)288
= 340 m/s
Mach number
+G = ,$Z
= 50$340
= 0!147
Find +1
$ b(E& " E04147)$1 = 29!2%G$%& = 7!44
Re = 50(0!2)$(1!44× 10"5) = 6!94× 105
c&$1 = 0!00025; b = 0!0158
b!E$1 = [b(E& " EY)$1]" [b(E& " E04147)$1]= 0!0158× 120$0!2 = 9!48
b(E& " EY)$1 = 29!2 + 9!48 = 38!7$+1 = 0!14
Pressure ratio
%1$%& = 7!81
%1$%G = (%1$%&)(%&$%G) = 7!81$7!44 = 1!050
%1 = 1!05(100)
%1 = 105 kPa
Mach number
,1 = 0!14(340)
,1 = 47!6 m/s
1147
Total properties
&1 = &5$(1 + 0!2+21 )
= 288$(1 + 0!2(0!14)2)
= 287
Ideal gas law
#1 = %$"&
= (105× 103)$(287× 287)
#1 = 1!27 kg/m3
1148
PROBLEM 12.57
Situation: Methane is pumped into a steel pipe—additional details are provided in theproblem statement.
Find: Pressure 3 km downstream.
ANALYSIS
Speed of sound
Z1 =pc"&G
=p1!31(518)320
= 466 m/s
Ideal gas law
#1 =%
"&
=1!2× 106
518× 320= 7!24 kg/m3
Mach number
+ =,
Z1=20
466= 0!043
By Eq. 12-75b(E& " E04043)$1 = 407
and by Eq. 12-79
%1$%& = 25!0
Re = 20(0!15)7!24$(1!5× 10"5)= 1!448× 106; c&$1 = 0!00035
b = 0!0160
b!E$1 = 0!0160(3000)$0!15 = 320
[b(E& " E04043)$1]" [b(E& " EY)$1] = b!E$1
b(E& " EY)$1 = 407" 320 = 83$+G = 0!093
By Eq. 12-79
%G$%& = 11!5
%G = (%G$%&)(%&$%1)%1
= (11!5$25!0)¡1!2× 106
¢
%G = 552 kPa
1149
PROBLEM 12.58
Situation: Hydrogen is transported in a n underground pipeline—additional detailsare provided in the problem statement.
Find: Pressure drop in pipe.
Properties: From Table A.2 " = 4' 127 J/kgK; c = 1!41; : = 0!81× 10"4m2!
APPROACH
Find the speed of sound at entrance
ANALYSIS
Speed of sound
Z =pc"&G
=p(1!41)(4' 127)(288)
= 1' 294m$ s
Mach number
! + = 200$1' 294 = 0!154
! c+2 = !0334;&c+ = 0!183
Reynolds number(200)(0!1)$(0!81× 10"4) = 2!5× 105
From Fig. 10-8 and Table 10.2b = 0!018
At entrance
b(E" " E1)$1 = LQ(0!0334) + (1" 0!0334)$0!0334 = 25!5
At exit
b(E" " E2)$1 = b(EY " E1)$1 + b(E1 " E2)$1 = 25!5" (0!018)(50)$0!1= 25!5" 9!0 = 16!5
From Fig. 12-22c+2 = 0!05U3
&c+ = 0!2236
Then
%2$%1 = (%"$%1)(%2$%")
= 0!183$0!2236 = 0!818
! %2 = 204!5 kPa
!% = 45!5 kPa
1150
PROBLEM 12.59
Situation: Helium ows in a tube—additional details are provided in the problemstatement.
Find: Mass ow rate in pipe.
Properties: From Table A.2 " = 2077 J/kgK; c = 1!66; : = 1!14× 10"4 m2/s.
ANALYSIS
Speed of sound
Z =pc"&G
=p(1!66)(2077)(288) = 996 m/s
%2$%1 = 100$120 = 0!833
Iterative solution:
,1 +1 Re×10"4 b c+21
(($="$; )9
(($="$<)9
c+22 %2$%1
100 0.100 4.4 0.022 0.0166 55.1 11.1 0.0676 0.49550 0.050 2.2 0.026 0.00415 234.5 182.5 0.0053 0.88555 0.055 2.4 0.025 0.00502 192.9 149.2 0.006715 0.86460 0.060 2.6 0.25 0.00598 161.1 111.1 0.008555 0.83661 0.061 2.6 0.25 0.00618 155.8 105.8 0.00897 0.83060.5 0.0605 2.6 0.25 0.006076 158.5 108.5 0.00875 0.833
Ideal gas law
# = %$"&
= 120× 103$(2' 077)(288)
= 0!201 kg/m3
Flow rate equation
/ = #, I
= (0!201)(60!6)(0$4)(0!05)2
/ = 0!0239 kg/s
1151
PROBLEM 12.60
Situation: The design of a supersonic wind tunnel is described in the problem state-ment.
Find: Do a preliminary design of a the system.
ANALYSIS
The area of the test section is
I- = 0!05× 0!05 = 0!0025 m2
From Table A.1, the conditions for a Mach number of 1.5 are
%$%5 = 0!2724' &$&5 = 0!6897 I$I& = 1!176
The area of the throat is
I& = 0!0025$1!176 = 0!002125 m2
Since the air is being drawn in from the atmosphere, the total pressure and totalpressure are 293 K and 100 kPa. The static temperature and pressure at the testsection will be
& = 0!6897× 293 = 202 K, % = 0!2724× 100 = 27!24 kPa
The speed of sound and velocity in the test section is
Z =&c"& =
&1!4× 287× 202 = 285 m/s
; = 1!5× 285 = 427 m/s
The mass ow rate is obtained using
/ = 0!685%5I&&"&5
= 0!685105 × 0!002125&287× 293
= 0!502 kg/s
The pressure and temperature in the vacuum tank can be analyzed using the re-lationships for an open, unsteady system. The system consists of a volume (thevacuum tank) and an inlet coming from the test section. In this case, the rst law ofthermodynamics gives
/2@2 "/1@1 = /#:(M#: + ;2#:$2) +1 ]2
Assume that the heat transfer is negligible and that the tank is initially evacuated.Then
/2@2 = /2(M#: + ;2#:$2)
1152
since /#: = /2! Thus the temperature in the tank will be constant and given by
Z@& = Z,&#: + ;2#:$2
717× & = 1004× 202 + 4272$2& = 410 K
The continuity equation applied to the vacuum tank is
,A#
AP= /
The density from the ideal gas law is
# =%
"&
which gives
,A%
AP= /"&
or
, =/"&
A%$AP
Assume the nal pressure in the tank is the pressure in the test section. Thus therate of change of pressure will be
A%
AP=27!24
30= 0!908 kPa/s
The volume of the tank would then be
, =0!502× 0!287× 410
0!908= 65 m3
This would be a spherical tank with a diameter of
1 =3
r6,
0= 5!0 m
COMMENTS
1. The tank volume could be reduced if the channel was narrowed after the testsection to reduce the Mach number and increase the pressure. This wouldreduce the temperature in the tank and increase the required rate of pressureincrease.
2. The tunnel would be designed to have a contour between the throat and testsection to generate a uniform velocity prole. Also a buttery valve would haveto be used to open the channel in minium time.
1153
PROBLEM 12.61
Situation: The design of a test system involving truncated nozzles is described in theproblem statement.
Find: Explain how to carry out the test program.
ANALYSIS
A truncated nozzle is attached to a storage tank supplied by the compressor. Thetemperature and pressure will be measured in the tank. These represent the totalconditions. The nozzles will be sonic provided that the tank pressure is greater than14.7/0.528=33 psia (or 18 psig).
Ideal Gas Law
# =%
"&=14!7× 1441716× 520
= 0!00237 slugs/ft3
A mass ow rate of 200 scfm corresponds to
/ = 200× 0!00237$60 = 0!00395 slugs/s
The ow rate is given by
/ = 0!685%5I&&"&5
Using 120 psig and a ow rate of 200 scfm gives a throat area of
I& =/&"&5
0!685%5
=0!00395×
&1716× 520
0!685× 134× 144= 2!82× 10"4 ft2
This area corresponds to an opening of
1 =
r4
0× 2!82× 10"4
= 0!0189 ft = 0.23 in
COMMENTS
1. This would represent the maximum nozzle size. A series of truncated nozzleswould be used which would yield mass ows of 1/4,1/2 and 3/4 of the maximumow rate. The suggested nozzle diameters would be 0.11 in, 0.15 in and 0.19 in.Another point would be with no ow which represents another data point.
2. Each nozzle would be attached to the tank and the pressure and temperaturemeasured. For each nozzle the pressure in the tank must exceed 18 psig toinsure sonic ow in the nozzle. The mass ow rate would be calculated foreach nozzle size and these data would provide the pump curve, the variation ofpressure with ow rate. More data can be obtained by using more nozzles.
1154
PROBLEM 13.1
Situation: A stagnation tube (A = 1 mm) is used to measure air speed.
Find: Velocity such that the measurement error is ' 2!5%.
Properties: : = 1!46× 10"5 m2/s.
ANALYSIS
Algebra using the coe"cient of pressure (from the vertical axis of Fig.13.1) gives
,! =q2!%$(#-,)
The allowable error is 2.5%, thus
,! =
s2!%
#-,= (1" 0!025)
s2!%
#
Thuss1
-,= 0!975
1
-,= 0!9752
-, =1
0!9752= 1!052
Thus when -, % 1!05, there will be a 2.5% error in ,!!
From Fig. 13-1, when -, = 1!05, then Re % 35
,!A
:= Re
,!A
:= 35
,! =35:
A
=35× (1!46× 10"5m2$ s)
0!001m= 0!511m$ s
,! = 0!511m$ s
1155
PROBLEM 13.2
Situation: A stagnation tube (A = 1 mm) is used to measure the speed of water.
Find: Velocity such that the measurement error is ' 1%.
ANALYSIS
Algebra using the coe"cient of pressure (from the vertical axis of Fig.13.1) gives,! =
p2!%$(#-,)! The allowable error is 1%, thus
,! =
s2!%
#-,= 0!99
s2!%
#
This simplies tos1
-,= 0!99
1
-,= 0!99
-, =1
0!992= 1!020
Thus when -, % 1!02, there will be a 1% error in ,!!
From Fig. 13-1, when -, = 1!02, then Re % 60. Thus
Re =, A
:= 60
, =60:
A
=60× (10"6m2$ s)
0!001m= 0!06m$ s
, ) 0!06 m$ s
1156
PROBLEM 13.3
Situation: A stagnation tube (A = 2 mm) is used to measure air speed.Manometer deection is 1 mm-H2O.
Find: Air Velocity: ,
ANALYSIS
#air = 1!25 kg/m3
!Mair = 0!001× 1000$1!25= 0!80 m
From Bernoulli equation applied to a stagnation tube
, =p2)!M = 3.96 m/s
Reynolds number
Re = , A$:
= 3!96× 0!002$(1!41× 10"5)= 563
Pressure coe"cient
-, % 1!001
, = 3!96$p-,
= 3!96$&1!001
= 3.96 m/s
1157
PROBLEM 13.4
Situation: A stagnation tube (A = 2 mm) is used to measure air speed (, = 12m/s).
Find: Deection on a water manometer: !M
Properties: For air, : = 1!4× 10"5 m2/s.
ANALYSIS
Determine -,
Re = , A$:
= 12× 0!002$(1!4× 10"5)= 1714
From Fig. 13.1 -, % 1!00Pressure drop calculationBernoulli equation applied to a stagnation tube
!% = #, 2$2
Ideal gas law
# =%
"&
=98' 000
287× (273 + 10)= 1!21 kg$m3
Then
!% = 9810!M
= 1!21× 122$2= 8!88× 10"3 m= 8.88 mm
1158
PROBLEM 13.5
Situation: A stagnation tube (A = 2 mm) is used to measure air speed.Air kinematic viscosity is 1!55× 10"5
Find: Error in velocity if -, = 1 is used for the calculation.
Properties: Stagnation pressure is !% = 5 Pa.
APPROACH
Calculate density of air by applying the ideal gas law. Calculate speed of air byapplying the Bernoulli equation to a stagnation tube. Then calculate Reynoldsnumber in order to check -,!
ANALYSIS
Ideal gas law
# =%
"&
=100' 000
287× 298= 1!17 kg/m3
Bernoulli equation applied to a stagnation tube
, =
s2!%
#
=
r2× 51!17
= 2!92 m/s
Reynolds number
Re =, A
:
=2!92× 0!0021!55× 10"5
= 377
Thus, -, = 1!002
% error = (1" 1$&1!002)× 100
= 0.1%
1159
PROBLEM 13.6
Situation: A probe for measuring velocity of a stack gas is described in the problemstatement.
Find: Stack gas velocity: ,!
ANALYSIS
Pressure coe"cient
-, = 1!4 = !%$(#, 20 $2)
Thus ,0 =
s2!%
1!4#
# =%
"&
=100' 000
410× 573= 0!426 kg$m3
Calculate pressure di!erence
!% = 0!01 m× 9810= 98!1 Pa
Substituting values
,0 =
s2!%
1!4#
=
r2× 98!11!4× 0!426
= 18.1 m/s
1160
PROBLEM 13.7
Situation: In 3.5 minutes, 14 kN of water ows into a weigh tank.
Find: Discharge: ]
Properties: (water 20!) = 9790 N/m3
ANALYSIS
. =.
!P
=14' 000
3!5× 60= 66!67N$ s
But ( = 9790 N/m3 so
] =.
(
=66!67N$ s
9790N$m3
] = 6!81× 10"3 m3/s
1161
PROBLEM 13.8
Situation: In 5 minutes, 80 m3 of water ows into a weigh tank.
Find: Discharge: ] in units of (a) m3$s, (b) gpm and (c) cfs.
ANALYSIS
] =V–P
=80
300
= 0.267 m3/s
] = 0!267 (m3$s)$(0!02832 m3$s/cfs)
= 9.42 cfs
] = 9!42 cfs × 449 gpm/cfs= 4230 gpm
1162
PROBLEM 13.9
Situation: Velocity data in a 24 inch oil pipe are given in the problem statement.
Find: (a) Discharge.(b) Mean velocity.(c)Ratio of maximum to minimum velocity.
ANALYSIS
Numerical integration
3(m) , (m/s) 20, 3 area (by trapezoidal rule)0 8.7 00.01 8.6 0.54 0.00270.02 8.4 1.06 0.00800.03 8.2 1.55 0.01300.04 7.7 1.94 0.01750.05 7.2 2.26 0.02100.06 6.5 2.45 0.02360.07 5.8 2.55 0.02500.08 4.9 2.46 0.02500.09 3.8 2.15 0.02311.10 2.5 1.57 0.01860.105 1.9 1.25 0.00700.11 1.4 0.97 0.00560.115 0.7 0.51 0.00370.12 0 0 0.0013
Summing the values in the last column in the above table gives ] = 0!196 m3/s.Then,
,mean = ]$I
= 0!196$(0!785(0!24)2)
= 4.33 m/s
,max$,mean = 8!7$4!33
= 2.0
This ratio indicates the ow is laminar. The discharge is
]=0.196 m3/s
1163
PROBLEM 13.10
Situation: Velocity data in a 16 inch circular air duct are given in the problemstatement.% = 14!3 psia, & = 70 !F
Find: (a) Flow rate: ] in cfs and cfm.(b) Ratio of maximum to mean velocity.(c) Whether the ow is laminar or turbulent.(d) Mass ow rate: /!
APPROACH
Perform numerical integration to nd ow rate (]). Apply the ideal gas law tocalculate density. Find mass ow rate using / = #].
ANALYSIS
Numerical integration
?(in.) 3(in.) , (ft/s) 203, (ft2$s) area (ft3$s)0.0 8.0 0 00.1 7.9 72 297.8 1.240.2 7.8 79 322.6 2.580.4 7.6 88 350.2 5.610.6 7.4 93 360.3 5.921.0 7.0 100 366.5 12.111.5 6.5 106 360.8 15.152.0 6.0 110 345.6 14.723.0 5.0 117 306.3 27.164.0 4.0 122 255.5 23.415.0 3.0 126 197.9 18.896.0 2.0 129 135.1 13.887.0 1.0 132 69.4 8.518.0 0.0 135 0 2.88
Summing values in the last column of the above table gives ] = 152!1 ft3$ s = 9124 cfmFlow rate equation
,mean = ]$I
= 152!1$(0!785(1!33)2)
= 109 ft/s
,max$,mean = 135$109
= 1.24
1164
which suggests turbulent ow .Ideal gas law
# =%
"&
=(14!3) (144)
(53!3) (530)
= 0!0728 lbm/ft3
Flow rate
/ = #]
= 0!0728(152!1)
= 11.1 lbm/s
1165
PROBLEM 13.11
Situation: A heated gas ows through a cylindrical stack–additional information isprovided in the problem statement.
Find: (a) The ratio 3"$1 such that the areas of the ve measuring segments areequal.(b) The location of the probe expressed as a ratio of 31$1 that corresponds to thecentroid of the segment(c) Mass ow rate
ANALYSIS
(a)
032" = (0$4)£(1$2)2 " 32"
¤
(3"$1)2 = 1$16" (3"$1)2(1$4)
5$4(3"$1)2 = 1$16
5(3"$1)2 = 1$4
3"$1 =
r1
20
= 0.224
b)
31I =
Z 9*2
0422369
[3 sin(T$2)$(T$2)](0$4)23A3 = 0!9(0$2)(33$3)|04590422369
(31)(0$4)[(1$2)2 " (0!22361)2] = 0!90(0$6)[(0!51)3 " (0!22361)3]
31$1 = 0!341
c)Ideal gas law
# = %$("& )
= 110× 103$(400× 573)= 0!480 kg/m3
Bernoulli equation applied to a stagnation tube
, =q2!%$#D
=q(2)#%)!M$#D
=p(2)(1' 000)(9!81)$0!48
&!M
= 202!2&!M
Values for each section are
1166
Station !M ,1 0.012 7.002 0.011 6.713 0.011 6.714 0.009 6.075 0.0105 6.55
Mass ow rate is given by
/ =X
Isector#,sector = I-#(X
,$5)
= (022$4)(0!480)(6!61) = 9.96 kg/s
1167
PROBLEM 13.12
Situation: A heated gas ows through a cylindrical stack–additional information isprovided in the problem statement.
Find: (a) The ratio 3"$1 such that the areas of the measuring segments are equal(b) The location of the probe expressed as a ratio of 31$1 that corresponds to thecentroid of the segment(c) Mass ow rate
ANALYSIS
Schematic of measurement locations
a)
032" = (0$6)[(1$2)2 " 32"]7$6(3"$1)
2 = (1$6)(1$4)
(3"$1)2 = 1$28
3"$1 = 0!189
b)
31I = 1$6
Z 0459
041899
[3 sin(T$2)$(T$2)]203 A3
(031$6)[(1$2)2 " (3")2] = 0!955(0$3)(33$3)|04509041899
31(0!52 " 0!1892) = 0!955(6$9)[0!53 " 0!1893]1
31$1 = (0!955)6(0!118)$(9(0!2143)) = 0.351
c)
# = %$"& = 115× 103$((420)(250 + 273)) = 0!523 kg/m3
, =q2)#%!M$#D =
p(2)(9!81)(1' 000)$0!523
&!M = 193!7
&!M
Calculating velocity from !M data gives
1168
Station !M(mm) ,1 8.2 17.542 8.6 17.963 8.2 17.544 8.9 18.275 8.0 17.326 8.5 17.867 8.4 17.75
From the above table, ,'@D = 17!75 m/s, ThenFlow rate equation
/ = (012$4)#,avg.
= ((0)(1!5)2$4)(0!523)(17!75)
= 16.4 kg/ s
1169
PROBLEM 13.13
Situation: Velocity data for a river is described in the problem statement.
Find: Discharge: ]
ANALYSIS
Flow rate equation
] =X
,#I#
, I , I1.32 m/s 7.6 m2 10.01.54 21.7 33.41.68 18.0 30.21.69 33.0 55.81.71 24.0 41.01.75 39.0 68.21.80 42.0 75.61.91 39.0 74.51.87 37.2 69.61.75 30.8 53.91.56 18.4 28.71.02 8.0 8.2
Summing the last column gives
] =549.1 m3/s
1170
PROBLEM 13.14
Situation: Velocity is measured with LDV. e = 4880 Å, 2K = 15!! On the Dopplerburst, 5 peaks occur in 12 7s.
Find: Air velocity: ,
ANALYSIS
Fringe spacing
!E =e
2 sin K
=4880× 10"10
2× sin 7!5!= 1!869× 10"6m
Velocity
!P = 12 7s$4 = 3 7s
, =!E
!P
=1!869× 10"6m3× 10"6 s
= 0.623 m/s
1171
PROBLEM 13.15
Situation: A jet and orice are described in the problem statement.
Find: Coe"cients for an orice: -@' -1' -A!
Assumptions: ,V =&2) × 1!90
ANALYSIS
-@ = ,V$,theory =p2) × 1!90$
p2) × 2
-@ =p1!90$2!0 = 0.975
-1 = IV$I0 = (8$10)2 = 0.640
-A = -@-1 = 0!975× 0!64 = 0.624
1172
PROBLEM 13.16
Situation: A uid jet discharges from a 3 inch orice. At the vena contracta, A = 2!6cm.
Find: Coe"cient of contraction: -1
ANALYSIS
-1 = IV$I0
= (2!6$3)2
= 0.751
1173
PROBLEM 13.17
Situation: A sharp edged orice is described in the problem statement.
Find: Flow coe"cient: <
ANALYSIS
If the angle is 90!' the orice and expected ow pattern is shown below in Fig. A.
We presume that the ow would separate at the sharp edge just as it does for theorice with a knife edge. Therefore, the ow pattern and ow coe"cient < shouldbe the same as with the knife edge.
However, if the orice were very thick relative to the orice diameter (Fig. B), thenthe ow may reattach to the metal of the orice thus creating a di!erent ow patternand di!erent ow coe"cient < than the knife edge orice.
1174
PROBLEM 13.18
Situation: Aging changes in an orice are described in the problem statement.
Find: Explain the changes and how they e!ect the ow coe"cients.
ANALYSIS
Some of the possible changes that might occur are listed below:
1. Blunting (rounding) of the sharp edge might occur because of erosion or corro-sion. This would probably increase the value of the ow coe"cient because -1would probably be increased.
2. Because of corrosion or erosion the face of the orice might become rough.This would cause the ow next to the face to have less velocity than when itwas smooth. With this smaller velocity in a direction toward the axis of theorice it would seem that there would be less momentum of the uid to producecontraction of the jet which is formed downstream of the orice. Therefore, asin case A, it appears that < would increase but the increase would probably bevery small.
3. Some sediment might lodge in the low velocity zones next to and upstream of theface of the orice. The ow approaching the orice (lower part at least) wouldnot have to change direction as abruptly as without the sediment. Therefore,the -1 would probably be increased for this condition and < would also beincreased.
1175
PROBLEM 13.19
Situation: Water (60 !F, ] = 3 cfs) ows through an orice (A = 5 in.) in a pipe(1 = 10 in.). A mercury manometer is connected across the orice.
Find: Manometer deection
Properties: Table A.5 (water at 60 !F): # = 1!94 slug$ ft3 ' ( = 62!37 lbf$ ft3'
7 = 2!36 × 10"5 lbf · s$ ft2, : = 1!22 × 10"5 ft2$ s! Table A.4 (mercury at 68 !F):6 = 13!55!
APPROACH
Find K, and then apply the orice equation to nd the pressure drop across the oricemeter. Apply the manometer equation to relate the pressure drop to the deectionof the mercury manometer.
ANALYSIS
Find K
A$1 = 0!50
ReA =4]
0A:
=4× 3!0
0 × 5$12× 1!22× 10"5
= 7!51× 105
from Fig. 13.13:< = 0!625
Orice section area
I! = (0$4)× (5$12)2 = 0!136 ft2
Orice equation
!% =
µ]
<I!
¶2#
2
=
µ3
0!625× 0!136
¶2µ1!94
2
¶
= 1208 lbf$ ft2
Apply the manometer equation to determine the pressure di!erential across the manome-ter. The result is
!% = (waterM (6mercury " 1)1208 lbf$ ft2 =
¡62!37 lbf$ ft3
¢M (13!55" 1)
Solving the above equation gives the manometer deection (M)
M = 1!54 ft = 18!5 in
1176
PROBLEM 13.20
Situation: Water ows through a 6 inch orice in a 12 inch pipe. Assume & = 60!F' : = 1!22× 10"5 ft2$s.
Find: Discharge: ]
APPROACH
Calculate piezometric head. Then nd K and apply the orice equation.
ANALYSIS
Piezometric head
!M = (1!0)(13!55" 1) = 12!55 ft
Find parameters needed to use Fig. 13.13.
(A$1) = 0!50
(2)!M)045A$: = (2) × 12!55)045(0!5)$(1!22× 10"5)= 1!17× 106
Look up K on Fig. 13.13< = 0!625
Orice equation
] = <I0(2)!M)045
] = 0!625(0$4× 0!52)(64!4× 12!55)045 = 3.49 cfs
1177
PROBLEM 13.21
Situation: A rough orice is described in the problem statement.
Find: Applicability of gure 13.13
ANALYSIS
A rough pipe will have a greater maximum velocity at the center of the pipe relative tothe mean velocity than would a smooth pipe. Because more ow is concentrated nearthe center of the rough pipe less radial ow is required as the ow passes throughthe orice; therefore, there will be less contraction of the ow. Consequently thecoe"cient of contraction will be larger for the rough pipe. So, using < from Fig.13.13 would probably result in an estimated discharge that is too small.
1178
PROBLEM 13.22
Situation: Water ows through a 2.5 inch orice in a 5 inch pipe.Orice diameter is A = 2!5 in = 0!208 ft! Pipe diameter is 1 = 5 in = 0!417 ft!A piezometer measurement gives !M = 4 ft.
Find: Discharge: ]
Properties: Table A.5 (water at 60 !F): : = 1!22× 10"5 ft2$ s!
APPROACH
Find K using the upper horizontal scale on Fig. 13.13, and then apply the oriceequation.
ANALYSIS
Calculate value needed to apply Fig. 13.13
ReA<
=p2)!M
A
:
=p2× (32!2 ft$ s2)× (4 ft)
µ0!208 ft
1!22× 10"5 ft2$ s
¶
= 2! 736 × 105
For A$1 = 0!5' Fig. 13.3 gives
< % 0!63
Orice section area
I! =0
4× (2!5$12 ft)2
= 0!03409 ft2
Orice equation
] = <I!p2)!M
= 0!63ס0!03409 ft2
¢p2× (32!2 ft$ s2)× (4 ft)
= 0!345 ft3$ s
] = 0!345 cfs
1179
PROBLEM 13.23
Situation: Kerosene at 20 !C ows through an orice. 1 = 3 cm, A$1 = 0!6'!% = 15 kPa
Find: Mean velocity in the pipe
Properties: Kerosene (20 !C) from Table A.4: # = 814 kg/m3' : = 2!37× 10"6 m2$s.
APPROACH
Find K using the upper horizontal scale on Fig. 13.13, and then apply the oriceequation to nd the discharge. Find the velocity in the pipe by using , = ]$I!
ANALYSIS
Calculate value needed to apply Fig. 13.13
ReA$< = (2!%$#)045(A$:)
= (2× 15× 103$814)045(0!6× 0!03$(2!37× 10"6))= 4!611× 104
From Fig. 13.13 for A$1 = 0!6< % 0!66
Orice section area
I! =0A2
4
=0 (0!6× 0!03m)2
4= 2! 545 × 10"4m2
Orice equation
] = <I0(2!%$#)045
= 0!66¡2! 545 × 10"4
¢(2× 15× 103$814)045
= 1! 020× 10"3m3$ s
Flow rate
,pipe =]
Ipipe
=4]
012
=4× (1! 020× 10"3m3$ s)
0 (0!03m)2
= 1! 443m
s
,pipe = 1!44 m$ s
1180
PROBLEM 13.24
Situation: Water at 20 !C ows in a pipe containing two orices, one that is horizontaland one that is vertical. For each orice, 1 = 30 cm and A = 10 cm. ] = 0!1 m3$s.
Find: (a) Pressure di!erential across each orice: !%) ' !%Z !(b) Deection for each mercury-water manometer: !M) ' !MZ
ANALYSIS
Find value needed to apply Fig. 13.13
4]$(0A:) = 4× 0!10$(0 × 0!10× 1!31× 10"6)= 9!7× 105
From Fig. 13.13 for A$1 = 0!333< = 0!60
Orice section area
I! = (0$4)(0!10)2
= 7!85× 10"3 m2
Orice equation
] = <I!p2)!M
Thus
!M = ]2$(<2I22)) = 0!12$(0!62 × (7!85× 10"3)2 × 2× 9!81)!M) = !MZ = 22!97 m"H2O
The deection across the manometers is
M) = MZ = 22!97$(6Hg " 6water) = 1.82 m
The deection will be the same on each manometer
Find !%
%= " %> = (!M = 9790× 22!97 = 224!9 kPa!%) = 225 kPa
For manometer F
((%9$() + R9)" ((%W$() + RW) = !M = 22!97 ftThus,
!%Z = %9 " %W = (!M" ((R9 " RW)= 9' 810(22!97" 0!3)
!%Z = 222 kPa
Because of the elevation di!erence for manometer F, !%) 6= !%Z
1181
PROBLEM 13.25
Situation: A pipe (1 = 30 cm) is terminated with an orice. The orice size isincreased from 15 to 20 cm with pressure drop (!% = 50 kPa) held constant.
Find: Percentage increase in discharge.
Assumptions: Large Reynolds number.
ANALYSIS
Find K valuesAssuming large Re' so K depends only on d/D. From Fig. 13.13
<15 = 0!62
<20 = 0!685
Orice equation
]15 = <15I15p2)!M
]15 = 0!62× (0$4)(0!15)2p2)!M
]15 = 0!01395(0$4)p2)!M
For the 20 cm orice
]20 = 0!685× (0$4)(0!20)2p2)!M
]20 = 0!0274(0$4)p2)!M
Thus the % increase is
(0!0274" 0!01395)$0!01395)× 100 = 96%
1182
PROBLEM 13.26
Situation: Water ows through the orice (vertical orientation) shown in the text-book. 1 = 50 cm, A = 10 cm, !% = 10 kPa, !R = 30 cm.
Find: Flow rate: ]
APPROACH
Find < and !M; then apply the orice equation to nd the discharge ]!
ANALYSIS
Piezometric head
!M = (%1$( + R1)" (%2$( + R2)= !%$( +!R
= 10' 000$9' 790 + 0!3
= 1!321 m of water
Find parameters needed to apply Fig. 13.13
A$1 = 10$50 = 0!20
ReA<
=p2)!M
A
:
=&2× 9!81× 1!321
0!1
10"6
= 5!091× 105
From Fig. 13.13< = 0!60
Orice equation
] = <I!p2)!M
= 0!60× (0$4)× (0!1)2&2× 9!81× 1!321
= 0.0240 m3/s
1183
PROBLEM 13.27
Situation: Flow through an orice is described in the problem statement.
Find: Show that the di!erence in piezometric pressure is given by the pressure dif-ference across the transducer.
ANALYSIS
Hydrostatic equation
%-I1 = %1 + (L1
%-I2 = %2 " (L2
so
%-I1 " %-I2 = %1 + (L1 " %2 + (L2= %1 " %2 + ((L1 + L2)
ButL1 + L2 = R1 " R2
or%-I1 " %-I2 = %1 " %2 + ((R1 " R2)
Thus,
%-I1 " %-I2 = (%1 + (R1)" (%2 + (R2)
1184
PROBLEM 13.28
Situation: Water (& = 50 !F, ] = 20 cfs) ows in the system shown in the textbook.b = 0!015!
Find: (a) Pressure change across the orice.(b)Power delivered to the ow by the pump.(c)Sketch the HGL and EGL.
APPROACH
Calculate pressure change by applying the orice equation. Then calculate thehead of the pump by applying the energy equation from section 1 to 2 (section 1 isthe upstream reservoir water surface, section 2 is the downstream reservoir surface).Then, apply the power equation.
ANALYSIS
Re = 4]$(0A:)
= 4× 20$(0 × 1× 1!41× 10"5) = 1!8× 106
Then for A$1 = 0!50, < = 0!625
Orice equation
] = <Ip2)!M or !M = (]$(<I))2$2)
where I = 0$4× 12! Then
!M = (20$(0!625× (0$4)))2$2)!M = 25!8 ft
!% = (!M = 62!4× 25!8 = 1,610 psf
Energy equation
%1$( + T1,21 $2) + R1 + M, = %2$( + T2,
22 $2) + R2 +
XME
0 + 0 + 10 + M, = 0 + 0 + 5 +X
ME
M, = "5 + , 2$2)(<G +<W + b2$1) + MEIorice
<G = 0!5; <W = 1!0
The orice head loss will be like that of an abrupt expansion:
MEI orice = (,V " ,pipe)2$(2))
Here, ,V is the jet velocity as the ow comes from the orice.
,V = ]$IV where IV = -1I0
1185
Assume-1 % 0!65 then ,V = 20$((0$4)× 12 × 0!65) = 39!2 ft/s
Also,, = ]$I, = 20$0 = 6!37 ft/s
ThenMEIorice = (39!2" 6!37)2$(2)) = 16!74 ft
Finally,
M, = "5 + (6!372$(2)))(0!5 + 1!0 + (0!015× 300$2)) + 16!74M, = 14!10 ft
* = ](M,$550
= 20× 62!4× 14!10$550
= 32.0 hp
The HGL and EGL are shown below:
1186
PROBLEM 13.29
Situation: Water ows (] = 0!03 m3/s) through an orice. Pipe diameter, 1 = 15cm. Manometer deection is 1 m-Hg.
Find: Orice size: A
APPROACH
Calculate!M! Then guess K and apply the orice equation. Check the guessed valueof < by calculating a value of Reynolds number and then comparing the calculatedvalue with the guessed value.
ANALYSIS
Piezometric head!M = 12!6× 1 = 12!6 m of water
Orice equation
I! = ]$(<p2)!M)
Guess < = 0!7' then
A2 = (4$0)]$(<p2)!M)
A2 = (4$0)× 0!03$h0!7p2) × 12!6
i= 3!47× 10"3 m2
A = 5!89 cm
A$1 = 0!39
ReA = 4× 0!03$(0 × 0!0589× 10"6) = 6!5× 105
< = 0!62
soA =
p(0!7$0!62)× 0!0589 = 0!0626 m
Recalculate < to nd that < = 0!62! Thus,
A = 6!26 cm
1187
PROBLEM 13.30
Situation: Gasoline (6 = 0!68) ows through an orice (A = 6 cm) in a pipe (1 = 10cm).!% = 50 kPa.
Find: Discharge: ]
Properties: : = 4× 10"7 m2/s (Fig. A-3)
Assumptions: & = 20!-!
ANALYSIS
Piezometric head
!M = !%$(
= 50' 000$(0!68× 9' 810)= 7!50 m
Find K using Fig. 13.13
A$1 = 0!60p2)!MA$: =
&2× 9!81× 7!50× 0!06$(4× 10"7) = 1!82× 106
< = 0!66
Orice equation
] = <I!p2)!M
= 0!66× (0$4)(0!06)2p2) × 7!50
] = 0!0226 m3/s
1188
PROBLEM 13.31
Situation: Water ows (] = 2 m3/s) through an orice in a pipe (1 = 1 m). !M = 6m-H2O.
Find: Orice size: A
APPROACH
Guess a value of <. Apply the orice equation to solve for orice diameter. Thencalculate Reynolds number and A$1 in order to nd a new value of <. Iterate untilthe value of < does not change.
ANALYSIS
Orice equation
] = <I!p2)!M
= <
µ0A2
4
¶p2)!M
Algebra
A =
·µ4]
0<
¶µ1
&2)!M
¶¸1*2
Guess < % 0!65
A =
·µ4× 20 · 0!65
¶µ1
&2× 9!81× 6
¶¸1*2
= 0!601m
Calculate values needed for Fig. 13.13
A
1=
0!601
1!0= 0!6
Re =4]
0A:
=4× 2
0 × 0!601× (1!14× 10"6)= 3!72× 106
From Fig. 13.13 with A$1 = 0!6 and Re = 3!72× 106, the value of < is
< = 0!65
Since this is the guessed value, there is no need to iterate.
A = 0!601m
1189
PROBLEM 13.32
Situation: Water ows (] = 3 m3/s) through an orice in a pipe (1 = 1!2 m).!% = 50 kPa.
Find: Orice size: A
Assumptions: < = 0!65; & = 20!-!
ANALYSIS
Piezometric head
!M = !%$(
= 50' 000$9790
= 5!11m
Orice equation
A2 = (4$0)× 3!0$(0!65&2× 9!81× 5!11) = 0!587
A = 0!766 m
Check <:
ReA = 4]$(0A:)
= 4× 3!0$(0 × 0!766× 10"6)= 5× 106
From Fig. 13.13 for A$1 = 0!766$1!2 = 0!64' < = 0!67Try again:
A =p(0!65$0!67)× 0!766 = 0!754
Check <: ReA = 5× 106 and A$1 = 0!63! From Fig. 13.13 < = 0!67 so
A =p(0!65$0!670)× 0!766 = 0.754 m
1190
PROBLEM 13.33
Situation: Water ows through a hemicircular orice as shown in the textbook.
Find: (a) Develop a formula for discharge.(b) Calculate ]!
APPROACH
Apply the ow rate equation, continuity principle, and the Bernoulli equation to solvefor ]!
ANALYSIS
Bernoulli equation%1 + #,
21 $2 = %2 + #,
22 $2
Continuity principle
,1I1 = ,2I2; ,1 = ,2I2$I1
,2 =p2(%1 " %2)$%$
q1" (I22$I21)
Flow rate equation
] = I2,2·I2$
q1" (I22$I21)
¸p2!%$#
but I2 = -1I0 where I0 is the section area of the orice. Then
] =
·-1I0$
q1" (I22$I21)
¸p2!%$#
or orice equation
] = <I0p2!%$#
where < is the ow coe"cient. Assume < = 0!65; Also I = (0$8)× 0!302 = 0!0353m2! Then
] = 0!65× 0!0353p2× 80' 000$1' 000
] = 0!290 m3/s
1191
PROBLEM 13.34
Situation: Water (20 !C, ] = 0!75 m3$s) ows through a venturi meter (A = 30 cm)in a pipe (1 = 60 cm).
Find: Deection on a mercury manometer.
ANALYSIS
Reynolds number
ReA = 4× 0!75$(0 × 0!30× 1× 10"6)= 3!18× 106
For A$1 = 0!50' nd K from Fig. 13.13
< = 1!02
Venturi equation
!M = []$(<I5)]2 $(2))
=£!75$(1!02× (0$4)× 0!32)
¤2$(2× 9!81)
= 5!52 m H2O
Manometer equation
M66 = !M62B$
µ(66(62B
" 1¶
M = 5!52$12!6
M = 0!44 m
1192
PROBLEM 13.35
Situation: Water (] = 10 m3$s) ows through a venturi meter in a horizontal pipe(1 = 2 m). !% = 200 kPa.
Find: Venturi throat diameter.
Assumptions: & = 20!-!
ANALYSIS
Guess that < = 1!01' and then proceed with calculations
] = <I!$p2)!M
where !M = 200' 000 Pa/(9,790 N/m3) = 20!4 m. ThenVenturi equation
I5 = ]$(<p2)!M)
or
0A2$4 = ]$(<p2)!M)
A = (4]$(0<p2)!M))
1*2
A = (4× 10$(0 × 1!01p2) × 20!4))1*2 = 0!794 m
Calculate < and compare with the guessed value
Re = 4]$(0A:) = 1!6× 107
Also A$1 = 0!4 so from Fig. 13.13 < % 1!0! Try again:
A = (1!01$1!0)1*2 × 0!794 = 0.798 m
1193
PROBLEM 13.36
Situation: A venturi meter is described in the problem statement.
Find: Rate of ow: ]
ANALYSIS
Find K
!M = 4 ft and A$1 = 0!33
ReA$< = (1$3)&2× 32!2× 4$1!22× 10"5) = 4!4× 105
< = 0!97 (Estimated from Fig. 13.13)
Venturi equation
] = <Ip2)M
= 0!97(0$4× 0!3332)&2× 32!2× 4
] = 1!36 cfs
1194
PROBLEM 13.37
Situation: A venturi meter is described in the problem statement.
Find: Range that the venturi meter would read: !p
ANALYSIS
The answer is -10 psi G ! p G 0 so the correct choice is b) .
1195
PROBLEM 13.38
Situation: Water ows through a horizontal venturi meter. !% = 100 kPa,A = 1 m, 1 = 2 m.
Find: Discharge: ]
Properties: : = 10"6 m2$s.
ANALYSIS
!% = 100 kPa so !M = !%$( = 100' 000$9790 = 10!2 m
Find K
p2)!MA$: =
&2× 9!81× 10!2× 1$10"6
= 1!4× 107
Then < % 1!02 (extrapolated from Fig. 13.13).Venturi equation
] = <Ip2)!M
= 1!02× (0$4)× 12p2) × 10!2
= 11.3 m3/s
1196
PROBLEM 13.39
Situation: A poorly designed venturi meter is described in the problem statement.
Find: Correction factor: <
ANALYSIS
Because of the streamline curvature (concave toward wall) near the pressure tap, thepressure at point 2 will be less than the average pressure across the section. Therefore,]0 will be too large as determined by the formula. Thus, < G 1.
1197
PROBLEM 13.40
Situation: Water (50 !F) ows through a vertical venturi meter. !% = 6!2 psi, A = 6in., 1 = 12 in., : = 1!4× 10"5 ft2$s.
Find: Discharge: ]
ANALYSIS
!% = 6!20 psi = 6.2 × 144 psf
Thus!M = 6!20× 144$62!4 = 14!3 ft
Find K
ReA<
=p2)!M
A
:
=&2× 32!2× 14!3
µ6$12
1!4× 10"5
¶
= 10!8× 105
So < = 1!02.Venturi equation
] = <I5p2)!M
= 1!02× (0$4)× (6$12)2&2× 32!2× 14!3
] = 6!08 cfs
1198
PROBLEM 13.41
Situation: Gasoline (6 = 0!69) ows through a venturi meter. A di!erential pressuregage indicates !% = 45 kPa.A = 20 cm, 1 = 40 cm, 7 = 3× 10"4 N·s$m2!
Find: Discharge: ]
ANALYSIS
!M = 45' 000$(0!69× 9' 810) = 6!65 m: = 7$# = 3× 10"4$690 = 4!3× 10"7 m2/s
Then p2)!MA$: =
&2× 9!81× 6!65× 0!20$(4!3× 10"7) = 5!3× 106
From Fig. 13.13< = 1!02
Venturi equation
] = <Ip2)!M
= 1!02× (0$4)× (0!20)2&2× 9!81× 6!65
] = 0!366 m3/s
1199
PROBLEM 13.42
Situation: Water passes through a ow nozzle. !% = 8 kPa. A = 2 cm, A$1 = 0!5,: = 10"6 m2/s' # = 1000 kg/m3!
Find: Discharge: ]
APPROACH
Find K, and then apply the orice equation.
ANALYSIS
Find K
ReA$< = (2!%$#)045(A$:)
= ((2× 8× 103)$(1' 000))045(0!02$10"6)= 8!0× 104
From Fig. 13-13 with A$1 = 0!5; < = 0!99!Venturi equation
] = <I(2!%$#)045
= (0!99)(0$4)(0!022)(2× 8× 103$103)045
] = 0!00124 m3/s
1200
PROBLEM 13.43
Situation: Water ows through the annular venturi that is shown in the textbook.
Find: Discharge
Assumptions: -A = 0!98
ANALYSIS
From Eq. (13.5)
< = -A$p1" (I2$I1)2
= 0!98$&1" 0!752
< = 1!48
Venturi equation
I = 0!00147m2
] = <I(2)!M)045
] = (1!48)(0!00147)(2!0× 9!81× 1)045
] = 0!00964 m3/s
1201
PROBLEM 13.44
Situation: The problem statement describes a ow nozzle with A$1 = 1!3!
Find: Develop an expression for head loss.
APPROACH
Apply the sudden expansion head loss equation and the continuity principle.
ANALYSIS
Continuity principle
,0I0 = ,VIV
,V = ,0I0$IV
= ,0 × (3$1)2 = 9,0
Sudden expansion head loss equation
ME = (,V " ,0)2$2)
Then
ME = (9,0 " ,0)2$2)
= 64, 20 $2)
1202
PROBLEM 13.45
Situation: A vortex meter (1 cm shedding element) is used in a 5 cm diameter duct.For shedding on one side of the element, 65 = 0!2 and b = 50 Hz.
Find: Discharge: ]
APPROACH
Find velocity from the Strouhal number (6P = Q1$, ) ! Then, nd the dischargeusing the ow rate equation.
ANALYSIS
6P = Q1$,
, = Q1$6P
= (50)(0!01)$(0!2)
= 2!5 m/s
Flow rate equation
] = , I
= (2!5)(0$4)(0!052)
] = 0!0049 m3/s
1203
PROBLEM 13.46
Situation: A rotometer is described in the problem statement.
Find: Describe how the reading on the rotometer would be corrected for nonstandardconditions.
APPROACH
Apply equilibrium, drag force, and the ow rate equation.
ANALYSIS
The deection of the rotometer is a function of the drag on the rotating element.Equilibrium (drag force balances weight):
H9 = .
-9I#,2$2 = /)
Thus, =
p2)/$(#I-9)
Since all terms are constant except density
,$,std. = (#std.$#)045
applying the ow rate equation gives
] = , I
! ]$]std. = (#std.$#)045 (1)
Correct by calculating # for the actual conditions and then use Eq. (1) to correct ]!
1204
PROBLEM 13.47
Situation: A rotometer is calibrated for gas with #standard = 1!2 kg/m3' but is used
for # = 1!1 kg/m3.The rotometer indicates ] = 5 L$s.
Find: Actual gas ow rate (]) in liters per second.
APPROACH
Apply equilibrium, drag force, and the ow rate equation.
ANALYSIS
The deection of the rotometer is a function of the drag on the rotating element.Equilibrium of the drag force with the weight of the oat gives
H9 = .
-9I#, 2
2= /)
Use the above equation to derive a ratio of standard to nonstandard conditions gives
,
,std.=
r#std.#
also] = , I
Therefore]
]std.=
r#std.#
Thus
] = 5×r1!2
1!1
] = 5!22 L/s
1205
PROBLEM 13.48
Situation: One mode of operation of an ultrasonic ow meter involves the time for awave to travel between two measurement stations–additional details are provided inthe problem statement.
Find: (a) Derive an expression for the ow velocity.(b) Express the ow velocity as a function of 2' Z and P!(c) Calculate the ow velocity for the given data.
ANALYSIS
(a)
P1 = 2$(Z+ , )
P2 = 2$(Z" , )!P = P2 " P1
=2
Z" ,"
2
Z+ ,
=22,
Z2 " , 2(1)
Thus
(Z2 " , 2)!P = 22,
, 2!P+ 22, " Z2!P = 0, 2 + (22,$!P)" Z2 = 0
Solving for , :
[("22$!P)±p(22$!P)2 + 4Z2]$2 = ("2$!P)±
p(2$!P)2 + Z2
Selecting the positive value for the radical
, = (2$!P)["1 +p1 + (Z!P$2)2]
(b) From Eq. (1)
!P =22,
Z2for Z FF ,
, = 12!52E
(c)
, =(300)2(10× 10"3)
2× 20= 22.5 m/s
1206
PROBLEM 13.49
Situation: Water ows over a rectangular weir. 2 = 4 m; 4 = 0!20 m, * = 0!25 m.
Find: Discharge: ]
ANALYSIS
Flow coe"cient
< = 0!40 + 0!05
µ4
*
¶
= 0!40 + 0!05
µ0!20
0!25
¶
= 0!440
Rectangular weir equation
] = <p2)243*2
= 0!44×&2× 9!81× 4× (0!2)3*2
= 0!6973m3$ s
Thus] = 0!697 m3/s
1207
PROBLEM 13.50
Situation: Water ows over a 60! triangular weir. 4 = 0!35 m.
Find: Discharge: ]
ANALYSIS
Triangular weir equation
] = 0!179p2)45*2
] = 0!179&2× 9!81(0!35)5*2
] = 0!0575 m3/s
1208
PROBLEM 13.51
Situation: Two weirs (A and B) are described in the problem statement.
Find: Relationship between the ow rates: ]= and ]>
ANALYSIS
Correct choice is c) ]= G ]> because of the side contractions on I.
1209
PROBLEM 13.52
Situation: A rectangular weir is described in the problem statement.
Find: The height ratio: 41$42
ANALYSIS
Correct choice is b) (41$42) G 1 because < is larger for smaller height of weir asshown by Eq. (13-10); therefore, less head is required for the smaller * value.
1210
PROBLEM 13.53
Situation: A rectangular weir is being designed for ] = 4 m3$s, 2 = 3 m, Waterdepth upstream of weir is 2 m.
Find: Weir height: *
ANALYSIS
First guess 4$* = 0!60! Then
< = 0!40 + 0!05(0!60) = 0!43!
Rectangular weir equation (solve for 4)
4 = (]$(<p2)2))2*3
= (4$(0!43p(2)(9!81)(3))2*3 = 0!788 m
Iterate:
4$* = 0!788$(2" 0!788) = 0!65; < = 0!40 + !05(!65) = 0!433
4 = 4$(0!433p(2)(9!81(3))2*3 = 0!785 m
Thus:* = 2!0"4 = 2!00" 0!785 = 1.215 m
1211
PROBLEM 13.54
Situation: The head of the rectangular weir described in Prob. 13.53 is doubled.
Find: The discharge.
ANALYSIS
Rectangular weir equation] = <
p2)243*2
Correct choice is c) .
1212
PROBLEM 13.55
Situation: A basin is draining over a rectangular weir. 2 = 2 ft, * = 2 ft. Initially,4 = 12 in.
Find: Time for the head to decrease from 4 = 1 ft to 0!167 ft (2 in).
ANALYSIS
With a head of 4 = 1 ft4
*=1
2= 0!5
thus
<# = 0!40 + 0!05 # 0!5= 0!425
With a head of 4 = 0!167 ft (2 in)
4
*=2$12
2= 0!0833
and
<( = 0!40 + 0!05 # 0!0833= 0!404
As a simplication, assume < is constant at
< = (!425 + !404) $2
= 0!415
Rectangular weir equation
] = 0!415p2)243*2
For a period of AP the volume of water leaving the basin is equal to I>A4 whereI> = 100 ft2 is the plan area of the basin. Also this volume is equal to ]AP.Equating these two volumes yields:
]AP = I>A4³0!415
p2)243*2
´AP = I> A4
Separate variables
AP =I> A4¡
0!415&2)243*2
¢
=
¡100 ft2
¢A4³
0!415p2× (32!2 ft$ s2) (2 ft)43*2
´
=³15!01
&ft · s
´ A4
43*2
1213
Integrate
!5Z
0
AP = (15!01)
1Z
04167
A4
43*2
!P = ("15!01)µ2&4
¶1
04167
= ("15!01)µ2&1"
2&0!167
¶
= 43!44 s
!P = 43!4 s
1214
PROBLEM 13.56
Situation: A piping system and channel are described in the textbook. The channelempties over a rectangular weir.
Find: (a) Water surface elevation in the channel.(b) Discharge.
ANALYSIS
Rectangular weir equation
] = <p2)243*2
Assume 4 = 1$2 ft. Then < = 0!4 + 0!05(12$3) = 0!41, then
] = 0!41&64!4× 243*2
] = 6!5843*2 (1)
Energy equation
%1$( + T1,21 $2) + R1 = %2$( + T2,
22 $2) + R2 +
XME
0 + 0 + 100 = 0 + 0 + 3 +4 +X
ME (2)
Combined head lossX
ME = (, 2$2))(<G + b2$1 + 2<0 +<W)
= (, 2$2))(0!5 + b(100$(1$3)) + 2× 0!35 + 1)
Assume b = 0!02 (rst try). ThenX
ME = 8!2,2$2)
Eq. (2) then becomes97 = 4 + 8!2, 2$2) (3)
But , = ]$I so Eq. (3) is written as
97 = 4 + 8!2]2$(2)I2)
where
I2 = ((0$4)(1$3)2)2 = 0!00762 ft4
97 = 4 + 8!2]2$(2) × 0!00762)97 = 4 + 16!72]2 (4)
1215
Solve for ] and 4 between Eqs. (1) and (4)
97 = 4 + 16!72]2
97 = 4 + 16!72(6!5843*2)2
4 = 0!51 ft and ] = 2!397 ft3/s
Now check Re and bFlow rate equation
, = ]$I
= 27!5 ft/s
Reynolds number
Re = , 1$: = 27!5× (1$3)$(1!4× 10"5)Re = 6!5× 105
From Figs. 10.8 and Table 10.2 b = 0!017! Then Eq. (3) becomes
97 = 4 + 7!3, 2$2)
and Eq. (4) is97 = 4 + 14!88]2
Solve for 4 and ] again:
4 = 0!53 ft and ] = 2!54 ft3/s
1216
PROBLEM 13.57
Situation: Water ows into a tank at a rate ] = 0!1 m3/s. The tank has two outlets:a rectangular weir (* = 1 m, 2 = 1 m) on the side, and an orice (A = 10 cm) onthe bottom.
Find: Water depth in tank.
APPROACH
Apply the rectangular weir equation and the orice equation by guessing the head onthe orice and iterating.
ANALYSIS
Guess the head on the orice is 1.05 m.Orice equation
]orice = <I0p2)M; < % 0!595
]orice = 0!595× (0$4)× (0!10)2&2× 9!81× 1!05 = 0!0212 m3/s
Rectangular weir equation
]weir = <p2)243*2; 4weir = (]$(<
p2)2)2*3 where < % 0!405
4weir = ((0!10" 0!0212)$(0!405&2× 9!81× 1))2*3 = 0!124 m
Try again:
]orice = (1!124$1!05)1*2 × 0!0212 m3$s = 0!0219 m3$s4weir = ((0!10" 0!0219)$(0!405
&2× 9!81× 1))2*3 = 0.124 m
4weir is same as before, so iteration is complete. Depth of water in tank is 1.124 m
1217
PROBLEM 13.58
Situation: Weirs with sharp edges are described in the problem statement.
Find: (a) If the weir behave di!erently if the edges were not sharp.(b) Explain what might happen without the vent downstream and how it would a!ectthe ow and glow coe"cient.
ANALYSIS
(a) With a sharp edged weir, the ow will break free of the sharp edge and a denite(repeatable) ow pattern will be established. That assumes that the water surfacesboth above and below the nappe are under atmospheric pressure. However, if thetop of the weir was not sharp then the lower part of the ow may follow the roundedportion of the weir plate a slight distance downstream.
This would probably lessen the degree of contraction of the ow. With less contrac-tion, the ow coe"cient would be larger than given by Eq. (13.10).(b) If the weir is not ventilated below the Nappe, for example a weir that extends the
full width of a rectangular channel (as shown in Fig. 13.18), then as the water plungesinto the downstream pool air bubbles would be entrained in the ow and some of theair from under the Nappe would be carried downstream. Therefore, as the air underthe Nappe becomes evacuated, a pressure less than atmospheric would be establishedin that region. This would draw the Nappe downward and cause higher velocities tooccur near the weir crest. Therefore, greater ow would occur than indicated by useof Eqs. (13.9) and (13.10).
1218
PROBLEM 13.59
Situation: Water ows over a rectangular weir. 2 = 10 ft, * = 3 ft, and 4 = 1!8 ft.
Find: Discharge: ]
APPROACH
Apply the rectangular weir equation.
ANALYSIS
The ow coe"cient is
< = 0!40 + 0!05
µ4
*
¶
= 0!40 + 0!05
µ1!8
3!0
¶
= 0!43
Rectangular weir equation
] = <p2)243*2
= 0!43³&2 · 32!2
´10× 1!83*2
= 83!3 ft3$ s
1219
PROBLEM 13.60
Situation: Water (60 !F) ows into a reservoir through a venturi meter (< = 1,I! = 12 in2, !% = 10 psi). Water ows out of the reservoir over a 60! triangularweir.
Find: Head of weir: 4
ANALYSIS
Venturi equation
] = <I!p2!%$#
= 1× (12$144)p2× 10× 144$1!94
= 3!21 ft3/s
Rectangular weir equation
] = 0!179p2)45*2
3!21 = 0!179&64!445*2
4 = 1.38 ft = 16.5 in.
1220
PROBLEM 13.61
Situation: Water enters a tank through two pipes A and B. Water exits the tankthrough a rectangular weir.
Find: Is water level rising, falling or staying the same?
APPROACH
Calculate ]in and ]out and compare the values. Apply the rectangular weir equationto calculate ]out and the ow rate equation to calculate ]in.
ANALYSIS
Rectangular weir equation
]out = <(2))045243*2
< = 0!40 + 0!05(1$2) = 0!425
]out = 0!425(8!025)(2)(1)
= 6!821 cfs
Flow rate equation
]in = ,=I= + ,>I>
= 4(0$4)(12) + 4(0$4)(0!52)
= 0(1!25) = 3!927 cfs
]in G ]out; therefore, water level is falling
1221
PROBLEM 13.62
Situation: Water exits an upper reservoir across a rectangular weir (2$4F = 3' *$4F =2) and then into a lower reservoir. The water exits the lower reservoir through a 60!
triangular weir.
Find: Ratio of head for the rectangular weir to head for the triangular weir: 4F$4-
Assumptions: Steady ow.
APPROACH
Apply continuity principle by equating the discharge in the two weirs.
ANALYSIS
Rectangular weir equation
] = (0!40 + !05(1$2))p2)(34F)4
145F (1)
Triangular weir equation] = 0!179
p2)4245
- (2)
Equate Eqs. (1) and (2)
(0!425p2)(3)4245
F = 0!179p2)4245
-
(4F$4- )245 = 0!179$(3× 0!425)
4F$4- = 0!456
1222
PROBLEM 13.63
Situation: For problem 13.62, the ow entering the upper reservoir is increased by50%.
Find: Describe what will happen, both qualitatively and quantitatively.
APPROACH
Apply the rectangular and triangular weir equations.
ANALYSIS
As soon as the ow is increased, the water level in the rst reservoir will start torise. It will continue to rise until the outow over the rectangular weir is equal tothe inow to the reservoir. The same process will occur in the second reservoir untilthe outow over the triangular weir is equal to the inow to the rst reservoir.
Calculations
Determine the increase in head on the rectangular weir with an increase in dischargeof 50%. Initial conditions: 4F$* = 0!5 so
< = 0!4 + !05× !5 = 0!425
Then]F# = 0!425
p2)24
3*2F# (1)
Assume<( = <# = 0!425 (rst try)
Then]F( = 0!425
p2)24
3*2F( (where ]F( = 1!5]#) (2)
Divide Eq. (2) by Eq. (1)
]F($]F# = (0!4252$0!4252)(4F($4F#)3*2
4F($4F# = (1!5)2*3 = 1!31
Check <# :< = 0!40 + !05× 0!5× 1!31 = 0!433
Recalculate 4F($4F#!
4F($4F# = ((0!425$0!433)× 1!5)2*3 = 1!29
The nal head on the rectangular weir will be 29% greater than the initial head . Nowdetermine the increase in head on the triangular weir with a 50% increase in discharge.
]-($]-# = (4-($4-#)5*2
or 4-($4-# = (]-($]-#)
= (1!5)2*5
= 1.18
The head on the triangular weir will be 18% greater with the 50% increase in discharge.
1223
PROBLEM 13.64
Situation: A rectangular weir (2 = 3 m) is situated in a canal.The water depth is 2 m and ] = 6 m3$s.
Find: Necessary weir height: *
APPROACH
Calculate the height by applying the rectangular weir equation by guessing < anditerating.
ANALYSIS
Rectangular weir equation] = <
p2)243*2
Assume < % 0!41 then
4 = (]$(0!41p2) × 3))2*3
4 = (6$(0!41×&2× 9!81× 3))2*3 = 1!10 m
Then
* = 2!0" 1!10 = 0!90 mand 4$* = 1!22
Check guessed < value:
< = 0!40 + 1!22× 0!05 = 0!461
Since this doesn’t match, recalculate 4:
4 = (6$(0!461×&2× 9!81× 3))2*3 = 0!986 m
So height of weir
* = 2!0" 0!986 = 1!01 m4$* = 0!976
Try again:
< = 0!40 + 0!976× 0!05 = 0!4494 = (6$(0!449×
&2× 9!81× 3))2*3 = 1!00 m
* = 2!00" 1!00 = 1.00 m
1224
PROBLEM 13.65
Situation: Water ows over a 60! triangular weir, 4 = 1!2 ft.
Find: Discharge: ]
APPROACH
Apply the triangular weir equation.
ANALYSIS
] = 0!179p2)45*2
] = 0!179p2× (32!2 ft$ s2)× (1!2 ft)5*2
] = 2!27 ft3/s
1225
PROBLEM 13.66
Situation: Water ows over a 45! triangular weir. ] = 10 cfm -A = 0!6!
Find: Head on the weir: 4
ANALYSIS
] = (8$15)-A(2))045 tan(K$2)45*2
] = (8$15)(0!60)(64!4)045 tan(22!5!)45*2
] = 1!06445*2
4 = (]$1!064)2*5
= (10$(60× 1!064))2*5
4 = 0!476 ft
1226
PROBLEM 13.67
Situation: A pump transports water from a well to a tank.The tank empties through a 60! triangular weir.Additional details are provided in the problem statement.
Find: Water level in the tank: M
Assumptions: b = 0!02
APPROACH
Apply the triangular weir equation to calculate M. Apply the ow rate equation andthe energy equation from well water surface to tank water surface to relate ] and M.
ANALYSIS
c&$1 = 0!001Energy equation
%1$( + T1,21 $2) + R1 + M, = %2$( + T2,
22 $2) + R2 +
XME
0 + 0 + 0 + M, = 0 + 0 + (2 + M) + (, 2$2))(<G + (b2$1) +<W)
Inserting parameter values
20 = (2 + M) + (, 2$2))(0!5 + (0!02× 2!5$0!05) + 1)18 = M+ 0!127, 2
, = ((18" M)$0!127)045
] = , I
= ((18" M)$0!127)045(0$4)(0!05)2 (10)
= 0!00551(18" M) (1)
Triangular weir equation] = 0!179
p2)4245
where 4 = M" 1! Then
] = 0!179p2)(M" 1)245 = 0!793(M" 1)245 (2)
To satisfy continuity, equate (1) and (2)
0!00551(18" M)045 = 0!793(M" 1)245
0!00695(18" M)045 = (M" 1)245
Solve for M:M = 1!24 m
Also, upon checking Re we nd our assumed b is OK.
1227
PROBLEM 13.68
Situation: A pitot tube is used to record data in subsonic ow. %5 = 140 kPa, % = 100kPa, &5 = 300 K.
Find: (a) Mach number: +(b) Velocity: ,
ANALYSIS
Use total pressure to nd the Mach number
%5$%1 = (1 +c " 12+2)
::"1
= (1 + 0!2+2)345 for air
(140$100) = (1 + 0!2+2)345
+ = 0!710
Total temperature
&5$& = 1 + 0!2+2
& = 300$1!10 = 273
Speed of sound
Z =&c"&
=p(1!4)(287)(273)
= 331 m/s
Mach number
, = +Z
= (0!71)(331)
, = 235 m/s
1228
PROBLEM 13.69
Situation: Eq. (13.13), the Rayleigh supersonic Pitot formula, can be used to calcu-late Mach number from data taken with a Pitot-static tube.
Find: Derive the Rayleigh supersonic Pitot formula.
ANALYSIS
The purpose of the algebraic manipulation is to express %1$%52 as a function of +1
only.
For convenience, express the group of variables below as
H = 1 + ((c " 1)$2)+2
X = c+2 " ((c " 1)$2)%1$%52 = (%1$%51)(%51$%52) = (%1$%51)(%1$%2)(H1$H2)
[*["1
From Eq. (12-38),%1$%2 = (1 + c+
22 )$(1 + c+
21 )
So%1$%52 = (%1$%51)((1 + c+
22 )$(1 + c+
21 ))(H1$H2)
[*["1
From Eq. (12-40), we have
(+1$+2) = ((1 + c+21 )$(1 + c+
22 ))(H2$H1)
1*2
Thus, we can write
(%1$%52) = (%1$%51)(+2$+1)(H1$H2)[+1*(2(["1))
But, from Eq. (12-41)+2 = (H1$X1)
1*2
Also, %1$%51 = 1$(H[*["11 )! So
%1$%52 = 1$(H[*["11 )(H
1*21 $X
1*21 )(1$+1)(H1$H2)
[+1*(2(["1))
= (X"1*21 $+1)H
"([+1)*2(["1)2
However,
H2 = 1 + ((c " 1)$2)+22 = 1 + ((c " 1)$2)(H1$X2) = (((c + 1)$2)+1)
2$X1
Substituting for H2 in expression for %1$%52 gives
%1$%52 = (1$+1)(X1*["11 )$((c + 1)$2+1)
[+1*["1
Multiplying numerator and denominator by (2$c + 1)1*["1 gives
%1$%52 ={[2c+2
1$(c + 1)]" (c " 1)$(c + 1)}1*(["1)
{[(c + 1)$2]+21}[*(["1)
1229
PROBLEM 13.70
Situation: A Pitot tube is used in supersonic airow. % = 54 kPa, %5 = 200 kPa,&5 = 350 K.
Find: (a) Mach number: +1
(b) Velocity: ,1
APPROACH
Apply the Rayleigh Pitot tube formula to calculate the Mach number. Then apply theMach number equation and the total temperature equation to calculate the velocity.
ANALYSIS
%1$%52 ={[2c+2
1$(c + 1)]" (c " 1)$(c + 1)}1*(["1)
{[(c + 1)$2]+21}[*(["1)
54$200 = (1!1667+21 " 0!1667)
245$(1!2+21 )345
and solving for +1 gives +1 = 1!79
&1 = &5$£1 + 0!5(c " 1)+2
1
¤
&1 = 350$(1 + 0!2(1!79)2)
= 213 K
Z1 =&c"&
=p(1!4)(287)(213)
= 293 m/s
,1 = +1Z1
= 1!79× 293,1 = 521 m/s
1230
PROBLEM 13.71
Situation: A venturi meter is used to measure ow of helium–additional details areprovided in the problem statement.%1 = 120 kPa %2 = 80 kPa c = 1!66 12$11 = 0!5, &1 = 17!- " = 2077 J/kg·K.
Find: Mass ow rate: /
APPROACH
Apply the ideal gas law and Eq. 13.16 to solve for the density and velocity at section2. Then nd mass ow rate / = #2I2,2.
ANALYSIS
Ideal gas law
#1 = %1$("&1)
= 120× 103$(2' 077× 290)= 0!199 kg/m3
%1$#1 = 6!03× 105
Eq. (13.16)
,2 = ((5)(6!03× 105)(1" 0!666044)$(1" (0!666142 × 0!54)))1*2 = 686 m/s#2 = (%2$%1)
1*[#1 = (0!666)046#1 = 0!784#1 = 0!156 kg/m
3
Flow rate equation
/ = #2I2,2
= (0!156)(0$4× 0!0052)(686)
= 0.0021 kg/s
1231
PROBLEM 13.72
Situation: An orice is used to measure the ow of methane.%1 = 150 kPa, %2 = 110 kPa, & = 300 K' A = 0!8 cm, and A$1 = 0!5.
Find: Mass ow rate: /
Properties: For methane: " = 518 J/kg*K, c = 1!31' and : = 1!6× 10"5 m2$s.
ANALYSIS
Ideal gas law
#1 =%1"&
=150× 103
518× 300= 0!965 kg/m3
Parameter on the upper scale of Fig. 13.13
2)!M = 2!%$#1= (2(30× 103))$0!965= 6!22× 104
ReA<
=p2)!M
µA
:
¶
=&6!22× 104
µ0!008
1!6× 10"5
¶
= 1!25× 105
From Fig. 13.13< = 0!62
S = 1" ((1$1!31)(1" (120$150))(0!41 + 0!35(0!4)4))= 0!936
Flow rate equation
/ = (0!63)(0!936)(0!785)(0!008)2p(2)(0!965)(30× 103)
= 0.00713 kg/s
1232
PROBLEM 13.73
Situation: Air ows through a 1 cm diameter orice in a 2 cm pipe. The pressurereadings for the orice are 150 kPa (upstream) and 100 kPa (downstream).
Properties: For air #(upstream) = 1!8 kg/m3' : = 1!8× 10"5 m2/s, c = 1!4!
Find: Mass ow rate
ANALYSIS
I0$I1 = (1$2)2 = 0!25; I0 = 7!85× 10"5 m2
Expansion factor:
S = 1" {(1$c)(1" (%2$%1))(0!41 + 0!35(I0$I1)2)}S = 1" {(1$1!4)(1" (100$150)(0!41 + 0!35(!25)2)}
= 0!897
/ = S I0<(2#1(%1 " %2))045
ReA$< = (2!%$#)045A$:
= (2× 50× 103$1!8)045(!01$(1!8× 10"5))= 236× 556= 1!31× 105
From Fig. 13.13 < = 0!63
/ = (0!897)(7!85× 10"5)(0!63)(2× 1!8× 50× 103)045
= 1.88×10"2 kg/s
1233
PROBLEM 13.74
Situation: Hydrogen (100 kPa, 15 !C) ows through an orice (A$1 = 0!5' < = 0!62)in a 2 cm pipe. The pressure drop across the orice is 1 kPa.
Find: Mass ow rate
ANALYSIS
A$1 = 0!50
A = 0!5× 0!02 m = 0!01 m
From Table A.2 for hydrogen (& = 15!- = 288<) : c = 1!41' and # = 0!0851 kg/m3.
I0 = (0$4)(0!01)2 = 7!85× 10"5 m2
/ = S I0<(2#1!%)
/ = (1)(7!85× 10"5)(0!62)(2(0!0851)(1000))045
/ = 6!35× 10"4 kg/s
1234
PROBLEM 13.75
Situation: Natural gas (50 psig, 70 !F) ows in a pipe.A hole (A = 0.2 in) leaks gas.%'5" = 14 psia
Find: Rate of mass ow out of the leak: /
Properties: For natural gas: c = 1!31' " = 3098 ft-lbf/slug !"!
Assumptions: The hole shape is like a truncated nozzle
ANALYSIS
Hole area
I =0A2
4=0 (0!2$12)2
4= 2!182× 10"4 ft2
Pressure and temperature conversions.
%5 = (50 + 14) = 64 psia = 9216 psfa
& = (460 + 70) = 530 !R
To determine if the ow is sonic or subsonic, calculate the critical pressure ratio
%&%5
=
µ2
c + 1
¶ ::"1
=
µ2
1!31 + 1
¶ 14311431"1
= 0!544
Compare this to the ratio of back pressure to total pressure:
%0%5
=14 psia64 psia
= 0!219
Since, %0$%5 G %&$%5, the exit owmust be sonic (choked). Calculate the critical mass owrate.
/ =%5I&&"&5
&c
µ2
c + 1
¶ (:+1)2(:"1)
=9216× 2!182× 10"4p
3098× 530)
&1!31
µ2
1!31 + 1
¶ (1431+1)2(1431"1)
= 0!00105 slug$ s
/ = 0!0338 lbm/s
1235
PROBLEM 13.76
Situation: Weirs are often subject to physical e!ects—additional details are providedin the problem statement.
Find: (a) List all physical e!ects not indicated in the text.(b) Explain how each might inuence the ow.
ANALYSIS
Some of the physical e!ects that might occur are:
a Abrasion might cause the weir crest to be rounded and this would undoubtedlyproduce greater ow than indicated by Eqs. 13.9 and 13.10 (see the answer toproblem 13.58)
b If solid objects such as oating sticks come down the canal and hit the weir theymay dent the weir plate. Such dents would be slanted in the downstreamdirection and may even cause that part of the weir crest to be lower than theoriginal crest. In either case these e!ects should cause the ow to be contractedless than before thus increasing the ow coe"cient.
c Another physical e!ect that might occur in an irrigation canal is that sedimentmight collect upstream of the weir plate. Such sediment accumulation wouldforce ow away from the bottom before reaching the weir plate. Therefore,with this condition less ow will be deected upward by the weir plate and lesscontraction of the ow would occur. With less contraction the ow coe"cientwould be increased. For all of the physical e!ects noted above ow would beincreased for a given head on the weir.
1236
PROBLEM 13.77
Situation: A constant head laboratory tank is described in the problem statement.
Find: Design a piece of equipment that could be used to determine the coe"cient ofcontraction for ow through an orice.
ANALYSIS
A jet to be studied can be produced by placing an orice in the side of a rectangulartank as shown below.
The plate orice could be machined from a brass plate so that the upstream edgeof the orice would be sharp. The diameter of the orice could be measured byinside calipers and a micrometer. The contracted jet could be measured by outsidecalipers and micrometer. Thus the coe"cient of contraction could be computed as-1 = (AV$A)
2. However, there may be more than desired error in measuring the waterjet diameter by means of a caliper. Another way to estimate AV is to solve for it fromIV where IV is obtained from IV = ]$,V! Then AV = (4IV$0)
12 ! The discharge, ],
could be measured by means of an accurate ow meter or by a weight measurementof the ow over a given time interval. The velocity at the vena contracta could befairly accurately determined by means of the Bernoulli equation. Measure the headon the orice and compute ,V from ,V =
&2)M where M is the head on the orice.
Because the ow leading up to the vena contracta is converging it will be virtuallyirrotational; therefore, the Bernoulli equation will be valid.
Another design decision that must be made is how to dispose of the discharge fromthe orice. The could be collected into a tank and then discharged into the labreservoir through one of the grated openings.
1237
PROBLEM 13.78
Situation: A laboratory setup is described in Prob. 13.77.
Find: Design test equipment to determine the resistance coe"cient, b , of a 2- indiameter pipe.
ANALYSIS
First, decisions have to be made regarding the physical setup. This should include:
a How to connect the 2 in. pipe to the water source.
b Providing means of discharging ow back into the lab reservoir. Probably have apipe discharging directly into reservoir through one of the grated openings.
c Locating control valves in the system
d Deciding a length of 2” pipe on which measurements will be made. It is desirableto have enough length of pipe to yield a measurable amount of head loss.
To measure the head loss, one can tap into the pipe at several points along thepipe (six or eight points should be su"cient). The di!erential pressure betweenthe upstream tap and downstream tap can rst be measured. Then measure thedi!erential pressure between the next tap and the downstream tap, etc., until thepressure di!erence between the downstream tap and all others has been completed.From all these measurements the slope of the hydraulic grade line could be computed.The discharge could be measured by weighing a sample of the ow for a period of time
and then computing the volume rate of ow. Or the discharge could be measuredby an electromagnetic ow meter if one is installed in the supply pipe.The diameter of the pipe should be measured by inside calipers and micrometer.
Even though one may have purchased 2 inch pipe, the nominal diameter is usuallynot the actual diameter. With this diameter one can calculate the cross-sectionalarea of the pipe. Then the mean velocity can be computed for each run: , = ]$I.Then for a given run, the resistance coe"cient, b , can be computed with Eq. (10.22).
Other things that should be considered in the design:
a) Make sure the pressure taps are far enough downstream of the control valve orany other pipe tting so that uniform ow is established in the section of pipewhere measurements are taken.
b) The di!erential pressure measurements could be made by either transducers ormanometers or some combination.
c) Appropriate valving and manifolding could be designed in the system so that onlyone pressure transducer or manometer is needed for all pressure measurements.
1238
d) The water temperature should be taken so that the specic weight of the watercan be found.
e) The design should include means of purging the tubing and manifolds associ-ated with the pressure di!erential measurements so that air bubbles can beeliminated from the measuring system. Air bubbles often produce erroneousreadings.
1239
PROBLEM 13.79
Situation: A laboratory setup is described in Prob. 13.77.
Find: Design test equipment to determining the loss coe"cients of 2- in gate andglobe valves.
ANALYSIS
Most of the design setup for this equipment will be the same as for Prob. (13.78)except that the valve to be tested would be placed about midway along the two inchpipe. Pressure taps should be included both upstream and downstream of the valveso that hydraulic grade lines can be established both upstream and downstream ofthe valve (see Fig. 10.15). Then as shown in Fig. (10.15) the head loss due to thevalve can be evaluated. The velocity used to evaluate<@ is the mean velocity in the2 in. pipe so it could be evaluated in the same manner as given in the solution forProb. (13.78).
1240
PROBLEM 13.80
Situation: A stagnation tube is used to measure air speed #air = 1!25 kg/m3, A = 2
mm, -, = 1!00Deection on an air-water manometer, M = 1 mm.The only uncertainty in the manometer reading is \7 = 0!1 mm.
Find: (a) Air Speed: ,(b) Uncertainty in air speed: \?
ANALYSIS
, =
µ2!%
#'#K-,
¶1*2
!% = M(%
Combining equations
, =
µ2(%M
#'#K-,
¶1*2=
µ(2)(9' 810)(0!001)
(1!25)(1!00)
¶1*2
, = 3!96 m/s
Uncertainty equation
\? =[,
[M\7
The derivative is[,
[M=
s2(%#'-,
1
2&M
Combining equations gives
\?,
=\72M
=0!1
2× 1!0= 0!05
So
\? = 0!05,
= 0!05× 3!96= 0.198 m/s
1241
PROBLEM 13.81
Situation: Water ows through a 6 in. orice situated in a 12 in. pipe. On a mercurymanometer, !M = 1 ft-Hg. The uncertainty values are \b = 0!03' \6 = 0!5 in.-Hg,\A = 0!05 in.
Find: (a) Discharge: ](b)Uncertainty in discharge: \X
APPROACH
Calculate discharge by rst calculating !M (apply piezometric head and manometerequation) and to apply the orice equation. Then apply the uncertainty equation.
ANALYSIS
Piezometric head
!M =
µ%1(%+ R1
¶"µ%2(%+ R2
¶
Manometer equation
%1 + (%R1 " (661 ft" (%(R2 " 1 ft) = %2%1 " %2(%
= "(R1 " R2) +µ(6D(%
¶1 ft" 1 ft
Combining equations
!M = (1!0 ft)µ(6D(%
" 1¶
= 1!0(13!55" 1) = 12!55 ft of water
Uncertainty equation for !M
\!7 =
µ0!5
12ft¶µ
(6D(%
" 1¶=
µ0!5
12
¶(13!55" 1)
= 0!523 ft of water
Orice equation
] = <0
4A2p2)!M
where < = 0!625 (from problem 13.20)
Thus, ] = 0!625×0
4× 0!52
&2× 32!2× 12!55
= 3.49 cfs
1242
Uncertainty equation applied to the discharge relationship
µ\X]
¶2=
ÃSXSb\b
]
!2+
ÃSXSA\A
]
!2+
ÃSXS!7\!7
]
!2
µ\X]
¶2=
µ\b<
¶2+
µ2\AA
¶2+
µ\!72!M
¶2
µ\X]
¶2=
µ!03
0!625
¶2+
µ2× 0!056
¶2+
µ!523
2× 12!55
¶2
\X]
= 0!055
\X = 0!055× 3!49 = 0.192 cfs
1243
PROBLEM 13.82
Situation: A rectangular weir (2 = 10 ft, * = 3 ft, 4 = 1!5 ft) is used to measuredischarge. The uncertainties are \[ = 5%' \6 = 3 in., \E = 1 in.
Find: (a) Discharge: ](b) Uncertainty in discharge: \X
APPROACH
Calculate < and apply the rectangular weir equation to nd discharge. Then applythe uncertainty equation.
ANALYSIS
Rectangular weir equation
< = 0!4 + 0!054
*= 0!4 + 0!05×
µ1!5
3!0
¶
= 0!425
] = <p2)243*2
= (0!425)&2× 32!2(10)(1!5)3*2
] = 62!7 cfs
Uncertainty equation
\2X =
µ[]
[<\b
¶2+
µ[]
[2\E
¶2+
µ[]
[4\6
¶2
µ\X]
¶2=
µ\b<
¶2+
µ\E2
¶2+
µ3
2×\64
¶2
= (!05)2 +
µ1$12
10
¶2+
µ3
2×3$12
1!5
¶2
= 0!2552
Thus, \X = 0!255]
= (0!255)(62!7)
\X = 16!0 cfs
1244
PROBLEM 13.83
Situation: Pitot tubes cannot measure low speed air velocities, because the pressuredi!erence between stagnation and static is too small. Additional details are providedin the problem statement.
Find: Develop ideas to measure air velocities from 1 to 10 ft$ s!
ANALYSIS
The are probably many di!erent approaches to this design problem. One idea is tosupport a thin strip of material in an airstream from a low friction bearing as shownin the gure.
bearing
rectangularstripwind
veloc ity
$
The drag force on the strip tends to rotate the strip and the angle of rotation willbe related to the ow velocity. Assume the strip has an area 6, a thickness i and amaterial density of #"! Also assume the length of the strip is 2! Assume that the forcenormal to the strip is given by the drag force associated with the velocity componentnormal to the surface and that the force acts at the mid point of the strip. Themoment produced by the ow velocity would be
+U/ = H92$2 = -96(#',20 cos
2 K$2)2$2
where K is the deection of the strip, #' is the air density and ,0 is the wind velocity.This moment is balanced by the moment due to the weight of the strip
+U/ =+)(2$2) sin K
Equating the two moments gives
+)(2$2) sin K = -96(#',20 cos
2 K$2)2$2
Solving for ,0 gives
, 20 =2+) sin K
-96#' cos2 K
,0 =
s2+) sin K
-96#' cos2 K
1245
But the mass of the strip can be equated to #"6i so the equation for velocity reducesto
,0 =
s2#"i) sin K
-9#' cos2 K
Assume the strip is a plastic material with a density of 800 kg/m3 and a thicknessof 1 mm. Also assume the drag coe"cient corresponds to a rectangle with an aspectratio of 10 which from Table 11.1 is 1.3. Assume also that a deection of 10o can bemeasured with reasonable accuracy. Assume also that the air density is 1.2 kg/m3!The wind velocity would be
,0 =
r2× 800× 0!001× 9!81× 0!174
1!3× 1!2× 0!9852= 1!3 m/s
This is close to the desired lower limit so is a reasonable start. The lower limit canbe extended by using a lighter material or possibly a wire frame with a thin lm ofmaterial. The relationship between velocity and angle of deection would be
Angle, deg
0 20 40 60 80 100
Velo
city
, m/s
02468
101214161820
This plot suggests that the upper range of 10 m/s could be reached with a deectionof about 70 degrees. The simple model used here is only an approximation for designpurposes. An actual instrument would have to be calibrated.
Other features to be considered would be a damping system for the bearing to handleow velocity uctuations and an accurate method to measure the deection. Thedesign calculations presented here show the concept is feasible. More detailed designconsiderations would then follow.
1246
PROBLEM 13.84
Situation: The volume ow rate of gas discharging from a small tube is less than aliter per minute.
Find: Devise a scheme to measure the ow rate.
ANALYSIS
One approach may be to use a very small venturi meter but instrumentation wouldbe di"cult (installing pressure taps, etc.). A better approach may be the use of somevolume displacement scheme. One idea may be to connect the ow to a exible bagimmersed in a water (or some liquid) bath as shown. As the gas enters the bag, thebag will expend displacing the liquid in the tank. The overow of the tank woulddischarge into a graduated cylinder to measure the displacement as a function of time.
overflow
graduatedcylinder
flexiblebag
valve
Features which must be considered are 1) the volume of the bag must be chosen suchthat pressure in the bag does not increase with increased displacement, 2) evaporationfrom the surface must be minimized and 3) a valve system has to be designed suchthat the ow can be diverted to the bag for a given time and then closed.
1247
PROBLEM 13.85
Situation: A owing uid.
Find: Design a scheme to measure the density of the uid by using a combination ofow meters.
ANALYSIS
The two ow meters must be selected such that one depends on the density of theuid and the other is independent of the uid density. One such combination wouldbe the venturi meter and the vortex meter as shown in the diagram.
! P
Venturi meter Vortex meter
The discharge in the venturi meter is given by the orice equation
] = <I!
s2!%
#
while the velocity measured by a vortex meter is
, =Q1
6P
where 1 is the size of the element. For a calibrated vortex ow meter one has
] = -b
where - is a calibration constant and b is the shedding frequency. The calibrationconstant is essentially independent of Reynolds number over a wide range of Reynoldsnumber. Thus we have
-b = <I!
s2!%
#
Solving for #
# =2!%(<I!)
2
(-b)2
The ow coe"cient does depend weakly on Reynolds number so there may be a sourceof error if < is not known exactly. If the viscosity of the uid is known, the Reynoldsnumber could be calculated and the above equation could be used for an iterativesolution.
1248
PROBLEM 14.1
Situation: A propeller is described in the problem statement.
Find: Thrust force.
ANALYSIS
From Fig. 14.2-- = 0!048!
Propeller thrust force equation
H- = --#14Q2
= 0!048× 1!05× 34 × (1' 400$60)2
H- = 2223N
1249
PROBLEM 14.2
Situation: A propeller is described in the problem statement.
Find: (a) Thrust.(b) Power.
APPROACH
Apply the propeller thrust force equation and the propeller power equation.
ANALYSIS
Reynolds number
Re = ,0$Q1
= (80' 000$3' 600)$((1' 400$60)× 3)= 0!317
From Fig. 14.2-- = 0!020
Propeller thrust force equation
H = --#14Q2-
= 0!020× 1!05× 34 × (1' 400$60)2
H- = 926 N
From Fig. 14.2-, = 0!011
Propeller power equation
* = -,#Q315
= 0!011× 1!05× 35 × (1400$60)3
* = 35!7 kW
1250
PROBLEM 14.3
Situation: A propeller is described in the problem statement.
Find: (a) Thrust for ,0 = 25 mph.(b) Power for (a).(c) Thrust for ,0 = 0!
APPROACH
Apply the propeller thrust force equation and the propeller power equation. CalculateReynolds number to nd -- .
ANALYSIS
Reynolds number
Q = 1000$60 = 16!67 rev/sec
,0 = 25 mph = 36.65 fps
Advance ratio,0Q1
=36!65
16!67× 8= 0!27
Coe"cient of thrust and power (from Fig. 14.2)
-- = 0!023
-, = 0!011
Propeller thrust force equation
H = --#14Q2-
= 0!023× 0!0024× 84 × 16!672
H- = 62!8 lbf
Propeller power equation
* = -,#Q315
= 0!011× 0!0024× 16!673 × 85
= 4372 ft-lb/sec
* = 7!95 hp
When the forward speed is 0 (,0 = 0) 'then the thrust coe"cient (Fig. 14.3) is
-- = 0!0475
Propeller thrust force equation
H- = --#14Q2-
= 0!0475× 0!0024× 84 × 16!672
H- = 130 lbf
1251
PROBLEM 14.4
Situation: A propeller is described in the problem statement.
Find: Angular speed of propeller.
APPROACH
Use Fig 14.4 to nd the advance diameter ratio at maximum e"ciency.
ANALYSIS
,0 = 30 mph = 44 fps
From Fig. 14.3, ,0$(Q1) = 0!285
Q = 1$(0!285,0)
Q = 44$(0!285× 8)= 19!30 rps
8 = 1158 rpm
1252
PROBLEM 14.5
Situation: A propeller is described in the problem statement.
Find: (a) Thrust.(b) Power output.
APPROACH
Apply the propeller thrust force equation and the propeller power equation. Use Fig14.2 to nd -- and -\ at maximum e"ciency.
ANALYSIS
From Fig. 14.2
-- = 0!023
-, = 0!012
Propeller thrust force equation
H- = --#14Q2
= 0!023× 0!0024× 64 × 25!732
H- = 47!4 lbf
Propeller power equation
* = -,#Q315
= 0!012× 0!0024× 65 × 25!733
= 3815 ft-lbf/s
* = 6!94 hp
1253
PROBLEM 14.6
Situation: A propeller is described in the problem statement.
Find: (a) Diameter of propeller.(b) Speed of aircraft.
APPROACH
Apply the Ideal gas law to get the density for the propeller thrust force equation tocalculate the diameter. Then apply the lift force equation to calculate the speed.
ANALYSIS
Ideal gas law
# = %$"&
= 60× 103$((287)(273))= 0!766 kg/m3
Propeller thrust force equation
H- = --#Q214
H- = Drag = Lift$30 = (1' 200)(9!81)$(30) = 392 N
392 = (0!025)(0!766)(3' 000$60)214
1 = 1!69m
Lift force
2 = . = -E(1$2)#,20 6
2$(-E6) = (#, 20 $2)
= (1' 200)(9!81)$((0!40)(10)) = 2' 943
, 20 = (2' 943)(2)$(0!766) = 7' 684
,0 = 87!7m$ s
1254
PROBLEM 14.7
Situation: A propeller is described in the problem statement.
Find: Maximum allowable angular speed.
ANALYSIS
,tip = 0!9Z = 0!9× 335 = 301!5 m/s,tip = J3 = Q(20)3
Q = 301!5$(203) = 301!5$(01) rev/s
8 = 60× Q rpm
1 (m) 8 (rpm)2 2' 879
3 1' 919
4 1' 440
1255
PROBLEM 14.8
Situation: A propeller is described in the problem statement.
Find: Angular speed of propeller.
APPROACH
Use Fig 14.2 to nd the advance diameter ratio at maximum e"ciency.
ANALYSIS
Advance ratio (from Fig. 14.2)
,0$(Q1) = 0!285
Rotation speed
Q = ,0$(0!2851)
= (40' 000$3' 600)$(0!285× 2)= 19!5 rev/s
8 = 19!5× 608 = 1170 rpm
1256
PROBLEM 14.9
Situation: A propeller is described in the problem statement.
Find: (a) Thrust.(b) Power input.
APPROACH
Apply the propeller thrust force equation and the propeller power equation. Use Fig14.2 to nd -- and -\ at maximum e"ciency.
ANALYSIS
From Fig. 14.2,
-- = 0!023
-, = 0!012
Propeller thrust force equation
H = --#14Q2-
= 0!023× 1!2× 24 × (19!5)2
H- = 168N
Propeller power equation
* = -,#Q315
= 0!012× 1!2× 25 × (19!5)3
* = 3!42 kW
1257
PROBLEM 14.10
Situation: A propeller is described in the problem statement.
Find: Initial acceleration.
APPROACH
Apply the propeller thrust force equation. Use Fig 14.2 to nd -- .
ANALYSIS
From Fig. 14.2-- = 0!048
Propeller thrust force equation
H- = --#14Q2
= 0!048#14Q2
= 0!048× 1!1× 24 × (1' 000$60)2
= 235 N
Calculate acceleration
C = H$/
= 235$300
C = 0!782 m$ s2
1258
PROBLEM 14.11
Situation: A pump is described in the problem statement.
Find: Discharge.
APPROACH
Apply discharge coe"cient. Calculate the head coe"cient to nd the correspondingdischarge coe"cient from Fig. 14.6.
ANALYSIS
Q = 1' 000$60
= 16!67 rev/s
Head coe"cient
-6 = !M)$12Q2
= 3× 9!81$((0!4)2 × (16!67)2)= 0!662
From Fig. 14.6, -X = ]$(Q13) = 0!625!Discharge coe"cient
] = 0!625× 16!67× (0!4)3
] = 0!667m3$ s
1259
PROBLEM 14.12
Situation: A pump is described in the problem statement.
Find: (a) Discharge.(b) Power demand.
APPROACH
Apply discharge coe"cient and power coe"cient. Calculate the head coe"cient tond the corresponding discharge and power coe"cients from Fig. 14.6.
ANALYSIS
Angular velocity
Q = 690$60
= 11!5 rev/s
Head coe"cient
-6 = !M)$(Q212)
= 10× 9!81$((0!712)2(11!5)2)= 1!46
From Fig. 14.6,
-X = 0!40 and -, = 0!76
Discharge coe"cient
] = -XQ13
= 0!40× 11!5× 0!7123
] = 1!66 m3$ s
Power coe"cient
* = -,#15Q3
= 0!76× 1' 000× 0!7125 × 11!53
* = 211 kW
1260
PROBLEM 14.13
Situation: A pump is described in the problem statement.
Find: (a) Discharge.(b) Power required.
APPROACH
Plot the system curve and the pump curve. Apply the energy equation from thereservoir surface to the center of the pipe at the outlet to solve the head of the pumpin terms of ]. Apply head coe"cient to solve for the head of the pump in terms of-6 . Apply discharge coe"cient to solve for -X in terms of ]—then use gure 14.6to nd the corresponding -6 . Find the power by using Fig. 14.7.
ANALYSIS
1 = 35!6 cm
Q = 11!5 rev/s
Energy equation from the reservoir surface to the center of the pipe at the outlet,
%1$( + ,21 $(2)) + R1 + M, = %2$( + ,
22 $(2)) + R2 +
XME
M, = 21!5" 20 + []2$(I22))](1 + b2$1 + cG + c0)2 = 64 m
Assume b = 0!014' 30$1 = 1! From Table 10-3, c0 = 0!35' cG = 0!1
M, = 1!5 + []2((0!014(64)$0!356) + 0!35 + 0!1 + 1)]$[2(9!81)(0$4)2(0!356)4]
= 1!5 + 20!42]2
-X = ]$(Q13) = ]$[(11!5)(0!356)3] = 1!93]
M, = -6Q212$) = -6(11!5)
2(0!356)2$9!81 = 1!71-6
](m3$s) -X -6 M,1 (m) M,2 (m)0.10 0.193 2.05 1.70 3.500.15 0.289 1.70 1.96 2.910.20 0.385 1.55 2.32 2.650.25 0.482 1.25 2.78 2.130.30 0.578 0.95 3.34 1.620.35 0.675 0.55 4.00 0.94
Then plotting the system curve and the pump curve, we obtain the operating condi-tion:
] = 0!22 m3/s
1261
From Fig. 14.7* = 6!5 kW
Q (m3 /s)
0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40
h p (m
)
0
1
2
3
4
5
pump curve
system curveoperating point
1262
PROBLEM 14.14
Situation: A pump is described in the problem statement.
Find: (a) Discharge.(b) Power required.
APPROACH
Same solution procedure applies as in Prob. 14.13. To nd power, apply powercoe"cient (use gure 14.6 to nd the -\ that corresponds to the -X.
ANALYSIS
The system curve will be the same as in Prob. 14.13
-X = ]$[Q13] = ]$[15(0!356)3] = 1!48]
M, = -6Q212$) = -6(15)
2(0!356)2$9!81 = 2!91-6
] -X -6 M,0.20 0.296 1.65 4.790.25 0.370 1.55 4.510.30 0.444 1.35 3.920.35 0.518 1.15 3.34
Q (m2 /s)
0.18 0.20 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.362
3
4
5
System curve
Pump curve
h(m
)p
Plotting the pump curve with the system curve gives the operating condition;
] = 0!32 m3$ s
-X = 1!48(0!32) = 0!474
Then from Fig. 14.6, -, = 0!70Power coe"cient
* = -,Q313#
= 0!70(15)3(0!356)51' 000
* = 13!5 kW
1263
PROBLEM 14.15
Situation: A pump is described in the problem statement.
Find: (a) Discharge.(b) Head.(c) Power required.
APPROACH
Apply discharge, head, and power coe"cients. Use Fig. 14.6 to nd the discharge,power, and head coe"cients at maximum e"ciency.
ANALYSIS
From Fig. 14.6, -X = 0!64;-, = 0!60; and -6 = 0!75
1 = 1!67 ft
Q = 1' 100$60 = 18!33 rev/s
Discharge coe"cient
] = -XQ13
= 0!64× 18!33× 1!673
] = 54!6 cfs
Head coe"cient
!M = -6Q212$)
= 0!75× 18!332 × 1!672$32!2
!M = 21!8 ft
Power coe"cient
* = -,#15Q3
= 0!60× 1!94× 1!675 × 18!333
= 93' 116 ft-lbf/sec
* = 169!3 hp
1264
PROBLEM 14.16
Situation: A pump is described in the problem statement.
Find: (a) Discharge.(b) Head.(c) Power required.
APPROACH
Apply discharge, head, and power coe"cients. Use Fig. 14.6 to nd the discharge,power, and head coe"cients at maximum e"ciency.
ANALYSIS
At maximum e"ciency, from Fig. 14.6, -X = 0!64; -, = 0!60; -6 = 0!75Discharge coe"cient
] = -XQ13
= 0!64× 45× 0!53
] = 3!60m3$ s
Head coe"cient
!M = -6Q212$)
= 0!75× 452 × 0!52$9!81
!M = 38!7m
Power coe"cient
* = -,#15Q3
= 0!60× 1' 000× 0!55 × 453
* = 1709 kW
1265
PROBLEM 14.17
Situation: A pump is described in the problem statement.
Find: Plot the head-discharge curve.
APPROACH
Apply the discharge and head coe"cient equations at a series of coe"cients corre-sponding to each other from Fig. 14.6.
ANALYSIS
1 = 14$12 = 1!167 ft
Q = 1' 000$60 = 16!7 rev/s
Head coe"cient
!M = -6Q212$)
= -6(16!7)2(1!167)2$32!2
= 11!8-6 ft
Discharge coe"cient
] = -XQ13
= -X16!7(1!167)3
= 26!5-X cfs
-X -6 ](cfs) !M(ft)0.0 2.9 0 34.20.1 2.55 2.65 30.10.2 2.0 5.3 23.60.3 1.7 7.95 20.10.4 1.5 10.6 17.70.5 1.2 13.2 14.20.6 0.85 15.9 10.0
Discharge, cfs
0 2 4 6 8 10 12 14 16 185
10
15
20
25
30
35
40
Hea
d, ft
1266
PROBLEM 14.18
Situation: A pump is described in the problem statement.
Find: Plot the head-discharge curve.
APPROACH
Apply the discharge and head coe"cient equations at a series of coe"cients corre-sponding to each other from Fig. 14.6.
ANALYSIS
1 = 60 cm = 0!60 m
8 = 690 rpm
Q = 11!5 rps
Head coe"cient
!M = -612Q2$)
= 4!853-6
Discharge coe"cient
] = -XQ13
= 2!484-X
-X -6 ](m3/s) M(m)0.0 2.90 0.0 14.10.1 2.55 0.248 12.40.2 2.00 0.497 9.70.3 1.70 0.745 8.30.4 1.50 0.994 7.30.5 1.20 1.242 5.80.6 0.85 1.490 4.2
Discharge, m3 /s
0 1 2
Hea
d, m
2
4
6
8
10
12
14
16
1267
PROBLEM 14.19
Situation: A pump is described in the problem statement.
Find: (a)Head at maximum e"ciency.(b) Discharge at maximum e"ciency.
APPROACH
Apply discharge and head coe"cients. Use Fig. 14.10 to nd the discharge and headcoe"cients at maximum e"ciency.
ANALYSIS
1 = 0!371× 2 = 0!742 mQ = 2' 133!5$(2× 60) = 17!77 rps
From Fig. 14.10, at peak e"ciency -X = 0!121' -6 = 5!15!Head coe"cient
!M = -6Q212$)
= 5!15(17!77)2(0!742)2$9!81
!M = 91!3m
Discharge coe"cient
] = -XQ13
= 0!121(17!77)(0!742)3
] = 0!878 m3$ s
1268
PROBLEM 14.20
Situation: A fan is described in the problem statement.
Find: Power needed to operate fan.
APPROACH
Apply power coe"cient. Calculate the discharge coe"cient (apply the ow rateequation to nd ]) to nd the corresponding power coe"cient from Fig. 14.16.
ANALYSIS
Flow rate equation
] = , I
= (60)(0$4)(1!2)2
= 67!8 m3/s
Discharge coe"cient
-X = ]$(Q13)
= (67!8)$((1' 800$60)(2)3
= 0!282
From Fig. 14.16 -, = 2!6! ThenPower coe"cient
* = -,#15Q3
= (2!6)(1!2)(2)5(30)3)
* = 2!70MW
1269
PROBLEM 14.21
Situation: A pump is described in the problem statement.
Find: Discharge through pipe.
APPROACH
Guess the pump head and iterate using Fig. 14.9 to get the corresponding ow rateand then Darcy-Weisbach equation to get the head for that ow rate (apply the owrate equation and Reynolds number to get the necessary parameters for the Darcy-Weisbach equation).
ANALYSIS
!R = 450" 366 = 84 mAssume !M = 90 m (F!R)' then from Fig. 14.9, ] = 0!24 m3/sFlow rate equation
, = ]$I
= 0!24$[(0$4)(0!36)2]
= 2!36 m/s; c&$1 = 0!00012
Assuming & = 20!-Reynolds number
Re = , 1$:
= 2!36(0!36)$10"6
= 8!5× 105
Frictional head loss (Darcy-Weisbach equation)from Fig. 10.8, b = 0!014
M( = (0!014(610)$0!36)((2!36)2$(2× 9!81)) = 6!73 m
M ! 84 + 6!7 = 90!7 m
from Fig. 14.9 ] = 0!23 m3/s;
, = 0!23$((0$4)(0!36)2) = 2!26 m/s
M( = [0!014(610)$0!36](2!26)2$(2× 9!81) = 6!18 m
so
!M = 84 + 6!2 = 90!2 m
, = 0!23$((0$4)(0!36)2) = 2!26 m/s
and from Fig. 14.9] = 0!225 m3/s
1270
PROBLEM 14.22
Situation: A pump is described in the problem statement.
Find: Discharge.
APPROACH
Apply discharge coe"cient. Calculate the head coe"cient to nd the correspondingdischarge coe"cient from Fig. 14.10.
ANALYSIS
1 = 0!371 m = 1!217 ft
Q = 1500$60 = 25 rps
Head coe"cient
!M = -6Q212$)
-6 = 150(32!2)$[(25)2(1!217)2]
= 5!217
from Fig. 14.10-X = 0!122
Discharge coe"cient
] = -XQ13
= 0!122(25)(1!217)3
] = 5!50 cfs
1271
PROBLEM 14.23
Situation: A pump is described in the problem statement.
Find: Maximum possible head developed.
APPROACH
Apply head coe"cient.
ANALYSIS
Head coe"cient-6 = !4)$1
2Q2
Since -6 will be the same for the maximum head condition, then
!4 T Q2
or41I500 = 41I000 × (1' 500$1' 000)2
41I500 = 102× 2!25
41I500 = 229!5 ft
1272
PROBLEM 14.24
Situation: A pump is described in the problem statement.
Find: Shuto! head.
APPROACH
Apply head coe"cient.
ANALYSIS
4 T Q2
so430$43546 = (30$35!6)
2
or
430 = 104× (30$35!6)2
430 = 73!8 m
1273
PROBLEM 14.25
Situation: A pump is described in the problem statement.
Find: Discharge when head is 50 m.
APPROACH
Apply discharge coe"cient. Calculate the head coe"cient to nd the correspondingdischarge coe"cient from Fig. 14.10.
ANALYSIS
Head coe"cient
-6 = !M)$(Q212)
= 50(9!81)$[(25)2(0!40)2]
= 4!91
from Fig. 14.10 -X = 0!136Discharge coe"cient
] = -XQ13
= 0!136(25)(0!40)3
] = 0!218 m3/s
1274
PROBLEM 14.26
Situation: A pump is described in the problem statement.
Find: (a) Flow rate.(b) Pressure rise across pump.(c) Power required.
Properties: From table A.4 # = 814 kg/m3!
APPROACH
Apply the discharge, head, and power coe"cient equations. Use Fig. 14.10 to ndthe discharge, power, and head coe"cients at maximum e"ciency.
ANALYSIS
8 = 5' 000 rpm = 83!33 rps
From Fig. 14.10 at maximum e"ciency -X = 0!125; -6 = 5!15; -, = 0!69Discharge coe"cient
] = -XQ13
= (0!125)(83!33)(0!20)3
] = 0!0833 m3/s
Head coe"cient
!M = -612Q2$)
= (5!15)(0!20)2(83!33)2$9!81
!M = 145!8 m
Power coe"cient
* = -,#15Q3
= (0!69)(814)(0!20)5(83!33)3
* = 104!0 kW
1275
PROBLEM 14.27
Situation: A centrifugal pump with di!erent impeller diameters is described in theproblem statement.
Find: Plot ve performance curves for the di!erent diameters in terms of head anddischarge coe"cients.
APPROACH
Calculate the ve discharge coe"cients by applying the discharge coe"cient equation,and the ve head coe"cients by the applying head coe"cient equation.
ANALYSIS
Discharge coe"cient
-X = ]$Q13
The rotational speed is 1750/60=29.2 rps. The diameter for each impeller is 0.4167ft, 0.458 ft, 0.5 ft, 0.542 ft and 0.583 ft. One gallon per minute is 0.002228 ft3$s. Sofor each impeller, the conversion factor to get the discharge coe"cient is
5” gpm × 0!001055!5” gpm × 0!0007946” gpm × 0!0006106!5” gpm × 0!0004797” gpm × 0!000385
Head coe"cient
-6 =!4)
Q212
The conversion factors to get the head coe"cient are
5” ft × 0!21755!5” ft × 0!18006” ft × 0!15106!5” ft × 0!12857” ft × 0!1111
The performance in terms of the nondimensional parameters is shown on the graph.
1276
Discharge coefficient
0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14
Hea
d co
effic
ient
1
2
3
4
5
6
5 inch5.5 inch6 inch6.5 inch7 inch
1277
PROBLEM 14.28
Situation: A pump is described in the problem statement.
Find: Plot the head-discharge curve.
APPROACH
Apply the head and discharge coe"cient equations at a series of coe"cients corre-sponding to each other from Fig. 14.10.
ANALYSIS
The rotational speed in rps is
Q = 500$60 = 8!33 rps
Discharge coe"cient
] = -XQ13
= -X(8!33)(1!523)
= 29!25-X (m3$s)
Head coe"cient
!M = -6Q212$)
= -6(8!332)(1!522)$9!81
= 16!34-6 (m)
-X ] -6 !M0 0 5!8 94!90!04 1!17 5!8 94!90!08 2!34 5!75 94!10!10 2!93 5!6 91!60!12 3!51 5!25 85!90!14 4!10 4!8 78!50!16 4!68 4!0 65!4
1278
Discharge, m 3/s
0 1 2 3 4 5
Hea
d, m
60
65
70
75
80
85
90
95
100
1279
PROBLEM 14.29
Situation: A pump is described in problem 14.13.
Find: (a) Suction specic speed.(b) Safety of operation with respect to cavitation.
APPROACH
Calculate the suction specic speed, and then compare that with the critical value of85' 000.
ANALYSIS
Suction specic speed
8&& = 8]1*2(8*64)3*4
8 = 690 rpm
8*64 ! 14!7 psi × 2!31 ft/psi" Mvap.press. ! 33 ft] = 0!22 m3$9× 264!2 gallons/s× 60 s/min = 3' 487 gpm8&& = 690× (3' 487)1*2$(33)3*4
8&& = 2' 960
8&& is much below 8,500; therefore, it is in a safe operating range.
1280
PROBLEM 14.30
Situation: A pump system is described in the problem statement.8 = 1' 500 rpm so Q = 25 rps; ] = 10 cfs; M = 30 ft
Find: Type of water pump.
APPROACH
Calculate the specic speed and use gure 14.14 to nd the pump range to which itcorresponds.
ANALYSIS
Specic speed
Q& = Qp]$[)3*4M3*4]
= (25)(10)1*2$[(32!2)3*4(30)3*4]
= 0!46
Then from Fig. 14.14, Q& F 0!60' so use a mixed ow pump.
1281
PROBLEM 14.31
Situation: A pump system is described in the problem statement.
Find: Type of pump.
APPROACH
Calculate the specic speed and use gure 14.14 to nd the pump range to which itcorresponds.
ANALYSIS
Specic speed
Q = 25 rps
] = 0!30 m3/sec
M = 8 meters
Q& = Qp]$[)3*4M3*4]
= 25(0!3)1*2$[(9!81)3*4(8)3*4]
= 0!52
Then from Fig. 14.14, Q& G 0!60 so use a mixed ow pump.
1282
PROBLEM 14.32
Situation: A pump system is described in the problem statement.
Find: Type of pump.
APPROACH
Calculate the specic speed and use gure 14.14 to nd the pump range to which itcorresponds.
ANALYSIS
Specic speed
8 = 1' 100 rpm = 18!33 rps
] = 0!4 m3/sec
M = 70 meters
Q& = Qp]$[)3*4M3*4]
= (18!33)(0!4)1*2$[(9!81)3*4(70)3*4]
= (18!33)(0!63)$[(5!54)(24!2)]
= 0!086
Then from Fig. 14.14, Q& G 0!23 so use a radial ow pump.
1283
PROBLEM 14.33
Situation: A pump is described in the problem statement.] = 5000 gpm
Find: Maximum speed.
APPROACH
Apply the suction specic speed equation setting the critical value for 8&& proposedby the Hydraulic Institute to 8500.
ANALYSIS
Suction specic speed8500 = 8]1*2$(8*64)3*4
The suction head is given as 5 ft. Then assuming that the atmospheric pressure is14.7 psia, and the vapor pressure is 0.256 psi, the net positive suction head (8*64)is
8*64 = 14!7 psi × 2!31 ft/psi+5 ft" Mvap.press. = 38!4 ft
Then
8 =8500× (8*64)3*4
]1*2
=8500× (38!4)3*4
50001*2
8 = 1850 rpm
1284
PROBLEM 14.34
Situation: A pump system is described in the problem statement.
Find: Type of pump
APPROACH
Calculate the specic speed and use gure 14.14 to nd the pump range to which itcorresponds.
ANALYSIS
Specic speed
Q& = Qp]$()3*4M3*4)
Q = 10 rps
] = 1!0 m3$s
M = 3 + (1!5 + b2$1), 2$(2));
, = 1!27 m/s
Assume b = 0!01, so
M = 3 + (1!5 + 0!01× 20$1)(1!27)2$(2× 9!81)= 3!14 m
Then
Q& = 10×&1$(9!81× 3!14)3*4
= 0!76
From Fig. 14.14, use axial ow pump.
1285
PROBLEM 14.35
Situation: A blower for a wind tunnel is described in the problem statement.Max. air speed = 40 m/s; Area = 0!36 m2; Q = 2' 000$60 = 33!3 rps;
Find: (a) Diameter.(b) Power requirements for two blowers.
APPROACH
Apply the discharge and power coe"cient equations. Use Fig. 14.6 to nd thedischarge and head coe"cients at maximum e"ciency. Apply the ow rate equationto get the ] to calculate the diameter with discharge coe"cient.
ANALYSIS
Flow rate equation
] = , ×I= 40!0× 0!36= 14!4 m3/s
# = 1!2 kg/m3 at 20!-
From Fig. 14.6, at maximum e"ciency, -X = 0!63 and -, = 0!60Discharge coe"cient
13 = ]$(Q-X)
= 14!4$(33!3× 0!63)= 0!686 m3
1 = 0!882 m
Power coe"cient
* = -,#Q315
= 0!6(1!2)(33!3)3(0!882)5
* = 14!2 kW
1286
PROBLEM 14.36
Situation: A blower for air conditioning is described in the problem statement.Volume = 105 m3; time for discharge = 15 min = 900 sec
Find: (a) Diameter.(b) Power requirements.
APPROACH
Apply the discharge and power coe"cient equations. Use Fig. 14.6 to nd thedischarge and head coe"cients at maximum e"ciency. Apply the ow rate equationto get the ] to calculate the diameter with discharge coe"cient.
ANALYSIS
8 = 600 rpm = 10 rps
# = 1!22 kg/m3 at 60!F
] = (105 m3)$(900 sec) = 111.1 m3$sec
From Fig. 14.6, at maximum e"ciency, -X = 0!63; -, = 0!60
For two blowers operating in parallel, the discharge per blower will be one half so
] = 55!55 m3$sec
Discharge coe"cient
13 = ]$Q-X = (55!55)$[10× 0!63] = 8!815
1 = 2!066 m
Power coe"cient
* = -,#15Q3
= (0!6)(1!22)(2!066)5(10)3
* = 27!6 kW per blower
1287
PROBLEM 14.37
Situation: A centrifugal compressor is described in the problem statement.
Find: Shaft power to run compressor
Properties: From Table A.2 for methane " = 518 J/kg/K and c = 1!31!
ANALYSIS
*57 = (c$(c " 1))]%1[(%2$%1)(["1)*[ " 1]= (c /$(c " 1))"&1[(%2$%1)(["1)*[ " 1]= (1!31$0!31)(1)518(300)[(1!5)0431*1431 " 1]= 66!1 kW
*ref = *57$=
= 66!1$0!7
*ref = 94!4 kW
1288
PROBLEM 14.38
Situation: A compressor is described in the problem statement.
Find: Volume ow rate into the compressor.
APPROACH
Apply equation 14.17.
ANALYSIS
*57 = 12 kW× 0!6 = 7!2 kW*57 = (c$(c " 1))]%1[(%2$%1)(["1)*[ " 1]
= (1!3$0!3)]× 9× 104[(140$90)043*143 " 1]= 4!18× 104]
] = 7!2$41!8
] = 0!172 m3/s
1289
PROBLEM 14.39
Situation: A centrifugal compressor is described in the problem statement.
Find: The shaft power.
APPROACH
Apply equation 14.17.
ANALYSIS
*57 = %1]1LQ(%2$%1)
= /"&1LQ(%2$%1)
= 1× 287× 288× LQ4= 114!6 kW
*ref = 114!6$0!5
*ref = 229 kW
1290
PROBLEM 14.40
Situation: A turbine system is described in the problem statement.
Find: (a) Power produced.(b) Diameter of turbine wheel.
Assumptions: & = 10!-
APPROACH
Apply the energy equation from reservoir to turbine jet. Then apply the continuityprinciple and the power equation.
ANALYSIS
Energy equation
%1$( + ,21 $2) + R1 = %2$( + ,
22 $2) + R2 +
XME
0 + 0 + 650 = 0 + , 2jet$2) + 0 + (b2$1)(,2pipe$2))
Continuity principle
,pipeIpipe = ,jetIjet
,pipe = ,jet(Ijet$Ipipe) = ,jet(0!16)2 = 0!026,jet
so(, 2jet$2))(1 + (b2$1)0!026
2) = 650
,jet = [(2× 9!81× 650)$(1 + (0!016× 10' 000)$1)0!0262)]1*2
= 107!3 m/s
Power equation
* = ](, 2jet=
= 107!3(0$4)(0!16)29' 810(107!3)20!85$(2× 9!81)* = 10!55 MW
,bucket = (1$2),jet
= 53!7 m/s = (1$2)J
1 = 53!7× 2$(360× (0$30))1 = 2!85 m
1291
PROBLEM 14.41
Situation: An impulse turbine is described in the problem statement.
Find: Referencing velocities to the bucket.
APPROACH
Apply the momentum principle.
ANALYSIS
V-Vj B
V-Vj B
V-Vj B
Momentum principle
XHbucket on jet = #]["(,V " ,>)" (,V " ,>)]
Then XHon bucket = #,VIV2(,V " ,>)
assuming the combination of buckets to be intercepting ow at the rate of ,VIV! Then
* = H,> = 2#IV[,2V ,> " ,V,
2>]
For maximum power production, A*$A,> = 0' so
0 = 2#I(, 2V " ,V2,>)0 = ,V " 2,>
or,> = 1$2,V
1292
PROBLEM 14.42
Situation: A jet of water strikes the buckets of an impulse wheel—additional detailsare provided in the problem statement.
Find: (a) Jet force on the bucket.(b) Resolve the discrepancy with Eq. 14.20.
APPROACH
Apply the momentum principle.
ANALYSIS
Consider the power developed from the force on a single bucket. Referencing velocitiesto the bucket givesMomentum principle
XHon bucket = #]rel. to bucket("(1$2),V " (1$2),V)
ThenHon bucket = #(,V " ,>)IV(,V)
but,V " ,> = 1$2,V
soHon bucket = 1$2#I,
2V
Then* = H,> = (1$2)#],
3V $2
The power is 1/2 that given by Eq. (14.20). The extra power comes from theoperation of more than a single bucket at a time so that the wheel as a whole turnsthe full discharge; whereas, a single bucket intercepts ow at a rate of 1$2 ,VIV!
1293
PROBLEM 14.43
Situation: A Francis turbine is described in the problem statement.
Find: (a) T1 for non-separating ow conditions .(b) Maximum attainable power.(c) Changes to increase power production.
ANALYSIS
Flow rate equation
,K1 = ^$(2031D)
= 126$(20 × 5× 1)= 4!01 m/s
J = 60× 20$60 = 20 rad/s
T1 = arc cot ((31J$,K1) + cot `1)
= arc cot ((5× 20$4!01) + 0!577)T1 = 6!78
!
T2 = arc tan (,K2$J32) = arc tan ((4!01× 5$3)$(3× 20)) = arc tan 0!355= 19!5!
Equation 14.24
* = #]J(31,1 cosT1 " 32,2 cosT2),1 = ,K1$ sinT1 = 4!01$0!118 = 39!97 m/s
,2 = ,K2$ sinT2 = 20!0 m/s
* = 998× 126× 20(5× 39!97× cos 6!78! " 3× 20!0× cos 19!5!)
* = 112 MW
Increase `2
1294
PROBLEM 14.44
Situation: A Francis turbine is described in the problem statement.
Find: (a) T1 for non-separating ow conditions.(b) Power.(c) Torque.
ANALYSIS
,K1 = 3$(20 × 1!5× 0!3) = 1!061 m/s,K2 = 3$(20 × 1!2× 0!3) = 1!326 m/s;J = (60$60)20 = 209"1
T1 = arc cot ((31J$,K1) + cot `1) = arc cot ((1!5(20)$1!415) + cot 85!)
= arc cot (6!66 + 0!0875)
T1 = 8!250
,tan1 = 31J + ,K1 cot `1 = 1!5(20) + 1!061(0!0875) = 9!518 m/s
,tan2 = 32J + ,K2cot `2 = 1!2(20) + 1!326("3!732) = 2!591 m/s& = #](31,tan1 " 32,tan2)
= 1' 000(4)(1!5× 9!518" 1!2× 2!591)
& = 44' 671 N-m
Power = &J
= 44' 671× 20* = 280!7 kW
1295
PROBLEM 14.45
Situation: A Francis turbine is described in the problem statement.
Find: T1 for non-separating ow conditions.
ANALYSIS
J = 120$60× 20 = 40 s"1
,K1 = 113$(20(2!5)0!9) = 7!99 m/s
T1 = arc cot ((31J$,K1) + cot `1)
= arc cot ((2!5(40)$7!99) + cot 45!)
= arc cot (3!93 + 1)
T1 = 11!280
1296
PROBLEM 14.46
Situation: A small hydroelectric project is described in the problem statement.
Find: (a) Power output.(b) Draw the HGL and EGL.
Assumptions: cG = 0!50; <W = 1!0; <0 = 0!2; <&$1 = 0!00016!
APPROACH
To get power apply the energy equation. Apply the ow rate equation to get , forthe head loss. Then apply the power equation.
ANALYSIS
Energy equation
%1$( + T1,21 $2) + R1 = %2$( + T2,
22 $2) + R2 +
XME + M5
0 + 0 + 3000 = 0 + 0 + 2600 +X
ME + M5X
ME = (, 2$2))(b(2$1) +<W +<G + 2<0)
Flow rate equation
, = ]$I = 8$((0$4)(1)2) = 10!19 ft/s;
Re = , 1$: = (10!19)(1)$(1!2× 10"5) = 8!5× 105
b = 0!0145XME = ((10!19)2$(64!4))[(0!0145)(1000$1) + 1!0 + 0!5 + 2× 0!2]
XME = 1!612(16!4) = 26!44 ft
M5 = 3000" 2600" 26!44 = 373!6 ft
Power equation
*in = (]M5$550
= (8)(62!4)(373!6)$550
*in = 339 hp
Power output from the turbine
*out = 339× g= 339× 0!8= 271!2 hp
1297
*out = 271 hp
Plot of HGL & EGLEGL
HGL
1298
PROBLEM 14.47
Situation: Pumps, with characteristics M,Ipump = 20[1 " (]$100)2] are connected inseries and parallel to operate a uid system with system curve M,'sys= 5 + 0!002]2!
Find: Operating point with a) one pump, b) two pumps connected in series and c)two pumps connected in parallel.
APPROACH
Equate the head provided by the pump and the head required by the system.
ANALYSIS
a) For one pump
20[1"µ]
100
¶2] = 5 + 0!002]2
20" 0!002]2 = 5 + 0!002]2
15 = 0!004]2
Q=61.2 gpm
b) For two pumps in series
2× 20[1"µ]
100
¶2] = 5 + 0!002]2
35 = 0!006]2
Q=76.4 gpm
c) For two pumps in parallel
20[1"µ
]
2× 100
¶2] = 5 + 0!002]2
20" 0!0005]2 = 5 + 0!002]2
15 = 0!0025]2
Q=77.4 gpm
1299
PROBLEM 14.48
Situation: Wind turbines are described in the problem statement.
Find: Width of wind turbine.
APPROACH
Apply the wind turbine maximum power equation.
ANALYSIS
Each windmill must produce 2 MW/20 = 100,000 W.Wind turbine maximum power
*max =16
54#, 3! I
In a 20 m/s wind with a density of 1.2 kg/m3' the capture area is
I =54
16
100000
1!2× 203= 35!16 m2
Consider the gure for the section of a circle.
$
R
H
The area of a sector is given by
I& =1
2K"2 "
1
2"4 cos(K$2)
where K is the angle subtended by the arc and 4 is the distance between the edgesof the arc. But
" =4
2 sin(K$2)so
I = 2I& =42
4[
K
sin2(K$2)" 2
cos(K$2)
sin(K$2)]
= 56!2× [K
sin2(K$2)" 2
cos(K$2)
sin(K$2)]
1300
Solving graphically gives K = 52!. The width of the windmill is
. = 4[1
sin(K$2)"
1
tan(K$2)]
Substituting in the numbers gives .=3.45 m.
1301
PROBLEM 14.49
Situation: A windmill is connected to a pump—additional details are provided in theproblem statement.
Find: Discharge of pump.
APPROACH
Apply the wind turbine maximum power equation to get * for the power equationto get ].
ANALYSIS
Wind turbine maximum power
* = (16$27$)(#I, 3$2)
= (16$27)(0!07$32!2)(0$4)(10)2(44)3$2
= 4' 309 ft-lbf/s
Power equation
0!80× * = (]M,
(0!80)(4' 309) = (]M,
3' 447 ft-lbf/s = (]M,
] = (3' 447)$((62!4)(10))
= 5!52 cfs = 331 cfm
] = 2476 gpm
1302
PROBLEM 14.50
Situation: A system is to supply water ow from a reservoir to an elevated tank—additional details are provided in problem 10.102.
Find: Design the system including the choice of pumps.
ANALYSIS
Assume that this system will be used on a daily basis; therefore, some safety shouldbe included in the design. That is, include more than one pump so that if onemalfunctions there will be at least another one or two to satisfy the demand. Also,periodic maintenance may be required; therefore, when one pump is down there shouldbe another one or two to provide service. The degree of required safety would dependon the service. For this problem, assume that three pumps will be used to supplythe maximum discharge of 1 m3/s. Then each pump should be designed to supply aow of water of 0.333 m3/s (5,278 gpm). Also assume, for the rst cut at the design,that the head loss from reservoir to pump will be no greater than 1 meter and thateach pump itself will be situated in a pump chamber at an elevation 1 m below thewater surface of the reservoir. Thus, the 8*64 will be approximately equal to theatmospheric pressure head, or 34 ft.Assume that the suction Specic speed will be limited to a value of 8,500:
8&& = 8' 500 = 8]1*2$(8*64)3*4
or 8]1*2 = 8' 500× (34)3*4 (1)
= 119' 681
Assume that 60 cycle A.C. motors will be used to drive the pumps and that thesewill be synchronous speed motors. Common synchronous speeds in rpm are: 1,200,1,800, 3,600; however, the normal speed will be about 97% of synchronous speed*.Therefore, assume we have speed choices of 1,160 rpm, 1,750 rpm and 3,500 rpm.Then from Eq. (1) we have the following maximum discharges for the di!erent speedsof operation:
8(rpm) ](gpm) ](m/s)1,160 10,645 0.6721,750 1,169 0.2953,500 1,169 0.074
Based upon the value of discharge given above, it is seen that a speed of 1,160 rpmis the choice to make if we use 3 pumps. The pumps should be completely free ofcavitation.Next, calculate the impeller diameter needed. From Fig. 14.10 for maximum e"-ciency -X ! 0!12 and -6 ! 5!2 or
0!12 = ^$Q13 (2)
and 5!2 = !4$(12Q2$)) (3)
1303
Then for 8 = 1' 160 rpm (Q = 19!33 rps) and ] = 0!333 m3/s we can solve for 1from Eq. (2).
13 = ]$(0!12 n)
= 0!333$(0!12× 19!33)= 0!144
or 1 = 0!524 m
Now with a 1 of 0.524 m the head produced will be
!4 = 5!212Q2$) (from Eq. (3))
= 5!2(0!524)2(19!33)2$(9!81)
= 54!4 m
With a head of 54.4 m determine the diameter of pipe required to produce a dischargeof 1 m3/s. From the solution to Prob. 10.100 (as an approximation to this problem),we have
M, = 50 m + (, 2$2))(2!28 + b2$1) m
Assume b = 0!012
2 = 400 m
so M, = 50 m + (, 2$2))(2!28 + 4!8$1) m
54 m = 50 + (, 2$2))(2!28 + 4!8$1) (4)
Equation (4) may be solved for 1 by an iteration process: Assume 1, then solve for, and then see if Eq. (4) is satised, etc. The iteration was done for 1 of 60 cm, 70cm and 80 cm and it was found that the closest match came with 1 = 70 cm. Nowcompute the required power for an assumed e"ciency of 92%.
* = ](M,$e!.
= 0!333× 9' 810× 54$0!92* = 192 kW
* = 257hp
In summary, 1 = 70 cm, 8 = 1,160 rpm,
] per pump = 0!333 m3/s, * = 192 kW
The above calculations yield a solution to the problem. That is, a pump and pipingsystem has been chosen that will produce the desired discharge. However, a trulyvalid design should include the economics of the problem. For example, the rst costof the pipe and equipment should be expressed in terms of cost per year based uponthe expected life of the equipment. Then the annual cost of power should be includedin the total cost. When this is done, the size of pipe becomes important (smallersize yields higher annual cost of power). Also, pump manufacturers have a multiple
1304
number of pump designs to choose from which is di!erent than for this problem. Wehad only one basic design although considerable variation was available with di!erentdiameters and speed.The design could also include details about how the piping for the pumps would becongured. Normally this would include 3 separate pipes coming from the reservoir,each going to a pump, and then the discharge pipes would all feed into the largerpipe that delivers water to the elevated tank. Also, there should be gate valves oneach side of a pump so it could be isolated for maintenance purposes, etc. Checkvalves would also be included in the system to prevent back ow through the pumpsin event of a power outage.
1305
PROBLEM 15.1
Situation: Water ows through a rectangular channel. ? = 4 in! , = 28 ft$ s!
Find: (a) Determine if the ow is subcritical or supercritical.(b) Calculate the alternate depth.
APPROACH
Check the Froude number, then apply the specic energy equation to calculate thealternative depth.
ANALYSIS
Froude number
H3 = ,$&)?
= 28&32!2× 0!333
= 8!55
The Froude number is greater than 1 so the ow is supercritical .Specic Energy Equation
N = ? + , 2$)
N = 0!333 + 282$(2× 32!2)= 12!51 ft
Let the alternate depth = ?2' then
N = ?2 +, 222)
= ?2 +]2
2) (?2 × 3)2
Solving for the alternative depth for N = 12!51 ft yields ?2 = 12!43 ft.
1306
PROBLEM 15.2
Situation: Water ows through a rectangular channel.] = 900 ft3$ s ? = 3 ft width = 16 ft!
Find: Determine if the ow is subcritical or supercritical.
APPROACH
Calculate average velocity by applying the ow rate equation. Then check the Froudenumber.
ANALYSIS
Flow rate equation
] = , I
900 = , × 18× 3, = 18!75
Froude number
H3 = ,$&)?
= 18!75$&32!2× 3)
= 4!09
The Froude number is greater than 1 so the ow is supercritical .
1307
PROBLEM 15.3
Situation: Water ows through a rectangular channel.] = 420 ft3$ s , = 9 ft$ s width = 18 ft!
Find: Determine if the ow is subcritical or supercritical.
APPROACH
Calculate ? by applying the ow rate equation. Then check the Froude number.
ANALYSIS
Flow rate equation
] = , I
420 = 9× 18× ?? = 2! 593 ft
Froude number
H3 =,&)?
=9 ft$ s
&32!2× 2! 593
H3 = 0!985
Since H3 G 1, the ow is subcritical
1308
PROBLEM 15.4
Situation: Water ows through a rectangular channel.] = 12m3$ s width = 3m!Three depths of ow are of interest: ? = 0!3' 1!0' and 2!0m!
Find:(a) For each specied depth:
(i) Calculate the Froude number.(ii) Determine if the ow is subcritical or supercritical.
(b) Calculate the critical depth
APPROACH
Calculate average velocities by applying the ow rate equation. Then check theFroude numbers. Then apply the critical depth equation.
ANALYSIS
Flow rate equation
] = , I
12 m3/s = , (3× ?),0430 = 12 m3/s $(3 m× 0!30 m) = 13!33 m/s;,140 = 12 m3$s $(3 m × 1 m) = 4 m/s,240 = 12 m3/s$(3 m× 2 m) = 2 m/s
Froude numbers
H3043 = 13!33 m/s$(9!81 m/s2 × 0!30 m)1*2 = 7.77 (supercritical)
H3140 = 4 m/s$(9!81 m/s2 × 1!0 m)1*2 = 1.27 (supercritical)
H3240 = 2 m/s /9.81 m/s2 × 1!0 m)1*2 = 0.452 (subcritical)
Critical depth equation
?1 = (^2$))1*3
= ((4 m2/s)2$(9!81 m/s2))1*3
= 1.18 m
1309
PROBLEM 15.5
Situation: Water ows through a rectangular channel.] = 12m3$ s width = 3m ? = 0!3m!
Find: (a) Alternate depth.(b) Specic energy.
APPROACH
Apply the ow rate equation to nd the average velocity. Then calculate specicenergy and alternate depth.
ANALYSIS
Flow rate equation
, =]
I
=12
3× 0!3= 13!33 m/s
Specic Energy Equation
N = ? + , 2$2)
= 0!30 + 9!06
= 9.36 m
Let the alternate depth = ?2' then
N = ?2 +, 222)
= ?2 +]2
2) (?2 × 3)2
Substitute numerical values
9!36 = ?2 +122
2× 9!81 (?2 × 3)2
Solving for ?2 gives the alternate depth.
? = 9!35 m
1310
PROBLEM 15.6
Situation: Water ows at the critical depth in a channel; , = 5m$ s!
Find: Depth of ow.
APPROACH
Calculate the critical depth by setting Froude number equal to 1.
ANALYSIS
Froude number
H31 =,&)?1
1 =5 m/sq
9!81 m/s2 × ?1
Critical depth
?1 =, 2
)
=(5 m/s)2
9!81 m/s2
?1 = 2.55 m
1311
PROBLEM 15.7
Situation: Water ows in a rectangular channel. ] = 320 cfs width = 12 ft!Bottom slope = 0.005 Q = 0!014!
Find: Determine if the ow is subcritical or supercritical.
APPROACH
Calculate ?, then calculate the average velocity by applying the ow rate equation.Then check the Froude number.
ANALYSIS
] =1!49
QI"2*361*2!
=1!49
QI(I$* )2*361*2!
=1!49
QD?(D?$(>+ 2?))2*361*2!
=1!49
Q12?(12?$(12 + 2?))2*361*2!
320 =1!49
0!01412?(12?$(12 + 2?))2*3(0!005)1*2
Solving for ? yields: ? = 2!45 ft.Flow rate equation
, = ]$I
= 320 ft3/s $(12 ft × 2!45 ft)= 10!88 ft/s
Froude number
H3 = ,$&)?
= 10!88$(32!2× 2!45)1*2
H3 = 1!22 supercritical
1312
PROBLEM 15.8
Situation: Water ows in a trapezoidal channel—additional details are provided in theproblem statement.
Find: Determine if the ow is subcritical or supercritical.
APPROACH
Calculate Froude number by rst applying the ow rate equation to nd averagevelocity and the hydraulic depth equation to nd the depth.
ANALYSIS
Flow rate equation
, =]
I
=10 m3/s
(3× 1 m2) + 12 m2
= 2!50 m/s
Calculate hydraulic depth
1 =I
&
=4m2
5m= 0!80m
Froude number
H3 =,&)1
=2!50
&9!81× 0!80
= 0!89
Since H3 G 1, the ow is subcritical
1313
PROBLEM 15.9
Situation: Water ows in a trapezoidal channel–additional details are provided inthe problem statement.
Find: The critical depth.
APPROACH
Calculate the critical depth by setting Froude number equal to 1, and simultaneouslysolving it along with the ow rate equation and the hydraulic depth equation.
ANALYSIS
For the critical ow condition, Froude number = 1!
,$p)1 = 1
or(,$
&1) =
&)
Flow rate equation
, = ]$I = 20$(3? + ?2)
1 = I$& = (3? + ?2)$(3 + 2?)
Combine equations
(20$(3? + ?2))$((3? + ?2)$(3 + 2?))045 =&9!81
Solve for ??1K = 1!40 m
1314
PROBLEM 15.10
Situation: Water ows in a rectangular channel—additional details are provided in theproblem statement.
Find: (a) Plot depth versus specic energy.(b) Calculate the alternate depth.(c) Calculate the sequent depths.
APPROACH
Apply the specic energy equation.
ANALYSIS
Specic Energy Equation for a rectangular channel.
N = ? + ^2$(2)?2)
For this problem
^ = ]$D = 18$6 = 3 m2$s
so
N = ? + 32$(2)?2)
= ? + 0!4587$?2
The calculated N versus ? is shown below
? (m) 0!25 0!3 0!4 0!5 0!6 0!7 0!8 0!9 1!0 1!1 1!4 2!0 4!0 7!0N (m) 7!59 5!4 3!27 2!33 1!87 1!64 1!52 1!47 1!46 1!48 1!63 2!11 4!03 7!01
The corresponding plot is
1315
The alternate depth to ? = 0!30 is ? = 5!38 mSequent depth:
?2 = (?1$2)(q1 + 8H 21 " 1)
H31 = ,$&)?1
= (3$0!3)$&9!81× 0!30
= 5!83
Hydraulic jump equation
?2 = (0!3$2)(&1 + 8× 5!832 " 1) = 2.33 m
1316
PROBLEM 15.11
Situation: A rectangular channel ends in a free outfall–additional details are providedin the problem statement.
Find: Discharge in the channel.
APPROACH
Calculate the critical depth by setting Froude number equal to 1, and simultaneouslysolve it along with the brink depth equation. Then apply the ow rate equation.
ANALYSIS
At the brink, the depth is 71% of the critical depth
Abrink % 0!71?1 (1)
Just before the brink where the ow is critical, H3 = 1
1 =,&)?1
=^p)?31
(2)
Combine Eqs. (1) and (2)
Abrink = 0!71
µ^2
)
¶ 13
Or
^ = )1*2µAbrink0!71
¶3*2
= (9!81)1*2µ0!35
0!71
¶3*2
= 1!084 m2/s
Discharge is
] = ^Y
=¡1!084 m2/s
¢(4m)
= 4.34m3/s
1317
PROBLEM 15.12
Situation: A rectangular channel ends in a free outfall–additional details are providedin the problem statement.
Find: Discharge in the channel.
APPROACH
Same solution procedure applies as in Prob. 15.11.
ANALYSIS
From the solution to Prob. 15.11, we have
^ = (1!20× 32!21*3$0!71)3*2
^ = 12!47 m2/s
Then
] = 15× 12!47 = 187 cfs
1318
PROBLEM 15.13
Situation: A rectangular channel ends in a free outfall. ] = 500 cfs Width = 14 ft.
Find: Depth of water at the brink of the outfall.
APPROACH
Calculate the depth at the brink by setting Froude number equal to 1, and simulta-neously solve this equation along with the brink depth equation.
ANALYSIS
At the brink, the depth is 71% of the critical depth
Abrink % 0!71?1 (1)
Just before the brink where the ow is critical, H3 = 1
1 =,&)?1
=^p)?31
(2)
Combine Eqs. (1) and (2)
Abrink = 0!71
µ^2
)
¶ 13
where
^ =]
Y
=500 ft3$ s
14 ft= 35!71 ft2$ s
Thus
Abrink = 0!71
á35!71 ft2$ s
¢2
32!2 ft$ s2
! 13
Abrink = 2.42 ft
1319
PROBLEM 15.14
Situation: Water ows over a broad-crested weir–additional details are given in theproblem statement.
Find: Discharge of water.
APPROACH
Apply the Broad crested weir—Discharge equation.
ANALYSIS
To look up the discharge coe"cient, we need the parameter 66+\
4
4 + *= (1!5$3!5)
= 0!43
From Fig. 15.7 - = 0!89!Broad crested weir—Discharge equation
] = 0!385 -2p2)4145
] = 0!385(0!89)(10)&2× 32!2(1!5)145
] = 50!5 cfs
1320
PROBLEM 15.15
Situation: Water ows over a broad-crested weir.(b) The weir height is * = 2m The height of water above the weir is 4 = 0!6m!(c) The length of the weir is 2 = 5m!
Find: Discharge.
APPROACH
Apply the Broad crested weir—Discharge equation.
ANALYSIS
To look up the discharge coe"cient, we need the parameter 66+\
4
4 + *=
0!6
0!6 + 2= 0!23
From Fig. 15.7- % 0!865
Broad crested weir—Discharge equation
] = 0!385 -2p2)43*2
= (0!385) (0!865)(5)&2× 9!81(0!60)145
] = 3!43 m3/s
1321
PROBLEM 15.16
Situation: Water ows over a broad-crested weir.Additional details are given in the problem statement.
Find: The water surface elevation in the reservoir upstream.
APPROACH
Apply the Broad crested weir—Discharge equation.
ANALYSIS
From Fig. 15.7, - % 0!85Broad crested weir—Discharge equation
] = 0!385 -2p2)43*2
25 = 0!385(0!85)(10)&2× 9!8143*2
Solve for 4
(4)3*2 = 1!725
4 = 1!438m
Water surface elevation
Elev. = 100m + 1!438m
= 101.4 m
1322
PROBLEM 15.17
Situation: Water ows over a broad-crested weir.Additional details are given in the problem statement.
Find: The water surface elevation in the upstream reservoir.
APPROACH
Apply the Broad crested weir—Discharge equation.
ANALYSIS
From Fig. 15.7, - % 0!85Broad crested weir—Discharge equation
] = 0!385- 2p2)43*2
1' 200 = 0!385(0!85)(40)&64!443*2
4 = 5!07 ft
Water surface elevation = 305.1 ft
1323
PROBLEM 15.18
Situation: Water ows in a rectangular channel.Two situations are of interest: an upstep and a downstep.Additional details are provided in the problem statement.
Find: (a) Change in depth and water surface elevation for the upstep.(b) Change in depth and water surface elevation for the downstep.(c) Maximum size of upstep so that no change in upstream depth occurs.
APPROACH
Apply the specic energy equation and check the Froude number.
ANALYSIS
Specic Energy Equation for the upstep
N1 = ?1 + ,21 $2)
= 3 + 32$(2× 9!81)= 3!46 m
Froude number
H31 = ,1$&)?1
= 3$&9!81× 3
= 0!55 (subcritical)
Then
N2 = N1 "!Rstep = 3!46" 0!30 = 3.16 m
Specic Energy Equation
?2 + ^2$(2)?22) = 3!16 m
?2 + 92$(2)?22) = 3!16
?2 + 4!13$?22 = 3!16
Solving for ?2 yields?2 = 2!49m
Then
!? = ?2 " ?1= 2!49" 3!00= -0.51 m
1324
So water surface drops 0!21 m!For a downstep
N2 = N1 +!Rstep
= 3!46 + 0!3 = 3.76 m
?2 + 4!13$?22 = 3!76
Solving for ?2 gives?2 = 3!40/
Then
!? = ?2 " ?1= 3!40" 3= 0.40 m
Water surface elevation change = +0!10 mMax. upward step before altering upstream conditions:
?1 = ?2 =3p^2$) = 3
p92$9!81 = 2!02
N1 = !Rstep +N2
where
N2 = 1!5?1 = 1!5× 2!02 = 3!03 m
Maximum size of step
Rstep = N1 "N2 = 3!46" 3!03 = 0.43 m
1325
PROBLEM 15.19
Situation: Water ows in a rectangular channel.Two situations are of interest: an upstep and a downstep.Additional details are provided in the problem statement.
Find: (a) Change in depth and water surface elevation for the upstep.(b) Change in depth and water surface elevation for the downstep.(c) Maximum size of upstep so that no change in upstream depth occurs.
APPROACH
Apply the specic energy equation by rst calculating Froude number and criticaldepth.
ANALYSIS
For the upstep
N2 = N1 " 0!60,1 = 2 m/s
Froude number
H31 = ,1$&)?1
= 2$&9!81× 3
= 0!369
Specic Energy Equation
N2 = 3 + (22$(2× 9!81))" 0!60 = 2!60 m?2 + ^
2$(2)?22) = 2!60
where ^ = 2× 3 = 6 m3/s/m. Then
?2 + 62$(2× 9!81× ?22) = 2!60
?2 + 1!83$?22 = 2!60
Solving, one gets ?2 = 2!24 m. Then
1326
!? = ?2 " ?1 = 2!34" 3!00 = -0.76 m
Water surface drops 0.16 mFor downward step of 15 cm we have
N2 = (3 + (22$(2× 9!81)) + 0!15 = 3!35 m?2 + 6
2$(2× 9!81× ?22) = 3!35
?2 + 1!83$?22 = 3!35
Solving: ?2 = 3!17 m or
?2 " ?1 = 3!17" 3!00 = +0.17 m
Water surface rises 0.02 mThe maximum upstep possible before a!ecting upstream water surface levels is for?2 = ?1Critical depth equation
?1 =3p^2$) = 1!54 m
Then
N1 = !Rstep +N2Icrit
!Rstep = N1 "N2Icrit = 3!20" (?1 + , 21 $2)) = 3!20" 1!5× 1!54!Rstep = +0.89 m
1327
PROBLEM 15.20
Situation: Water ows over an upstep–additional details are provided in the problemstatement.
Find: Maximum value of !R to permit a unit ow rate of 6 m2$s.
ANALYSIS
Critical depth equation
?1 = (^2$))1*3
= (62$9!81)04333
= 1!542 m
where ?1 is depth allowed over the hump for the given conditions.Specic Energy Equation
N1 = N2
,1 = ^$?1 = 6$3 = 2 m/s
,2 = 6$1!542 = 3!891 m/s
, 21 $2) + ?1 = , 22 $2) + ?2 +!R
22$2) + 3 = (3!8912$(2× 9!81)) + 1!542 +!R!R = 3!204" 0!772" 1!542 = 0.89 m
1328
PROBLEM 15.21
Situation: A rectangular channel has a gradual contraction in width–additionaldetails are provided in the problem statement.
Find: (a) Change in depth.(b) Change in water surface elevation.(c) Greatest contraction allowable so that upstream conditions are not altered.
ANALYSIS
Froude number
H31 = ,1$&)?1
= 3$&9!81× 3
= 0!55 (subcritical)
Specic Energy Equation
N1 = N2
= ?1 + ,21 $2)
= 3 + 32$2× 9!81 = 3!46 m^2 = ]$D2 = 27$2!6 = 10!4 m3/s/m
Then
?2 + ^2$(2)?22)
= ?2 + (10!4)2$(2× 9!81× ?22) = 3!46
?2 + 5!50$?22 = 3!46
Solving: ?2 = 2!71 m.
!Rwater surface = !? = ?2 " ?1 = 2!71" 3!00 = 0.29 m
Max. contraction without altering the upstream depth will occur with ?2 = ?1
N2 = 1!5?1 = 3!45; ?1 = 2!31 m
Then
, 21 $2) = ?1$2 = 2!31$2 or ,1 = 4!76 m/s
]1 = ]2 = 27 = D2?1,1
D2 = 27$(2!31× 4!76) = 2!46 m
The width for max. contraction = 2.46 m
1329
PROBLEM 15.22
Situation: Ships streaming up a channel cause a problem due to a phenomena called“ship squat.” Additional details are provided in the problem statement.
Find: The change in elevation or “ship squat” of a fully loaded supertanker.
APPROACH
Apply the specic energy equation from a section in the channel upstream of the shipto a section where the ship is located. Then apply the ow rate equation and solvefor ?2.
ANALYSIS
Specic Energy Equation
N1 = N2
, 21 $2) + ?1 = , 22 $2) + ?2
I1 = 35× 200 = 7' 000 m2
,1 = 5× 0!515 = 2!575 m/s2!5752$(2× 9!81) + 35 = (]$I2)
2$(2× 9!81) + ?2 (1)
where ] = ,1I1 = 2!575× 7' 000 m3/sI2 = 200 m × ?2 " 29× 63
Flow rate equation
] = ,1I1 (2)
= 2!575× 7' 000 m3/sI2 = 200 m × ?2 " 29× 63 (3)
Substituting Eqs. (2) and (3) into Eq. (1) and solving for ?2 yields ?2 = 34!70 m.Therefore, the ship squat is
?1 " ?2 = 35!0" 34!7= 0.30 m
1330
PROBLEM 15.23
Situation: A rectangular channel has a small reach that is roughened with angleirons–additional details are provided in the problem statement.
Find: Determine the depth of water downstream of angle irons.
APPROACH
Apply the momentum principle for a unit width.
ANALYSIS
Momentum principle
XH$ =
X/!,! "
X/#,#
(?21$2" (?22$2" 2000 = "#, 21 ?1 + #,
22 ?2
Let ,1 = ^$?1 and ,2 = ^$?2 and divide by (
?21$2" ?22$2" 2000$( = "^21?1$()?
21) + ^
22?2$()?
22)
1$2" ?22$2" 3!205 = (+(20)2$32!2)("1 + 1$?2)
Solving for ?2 yields: ?2 = 1!43 ft
1331
PROBLEM 15.24
Situation: Water ows out of a reservoir into a steep rectangular channel–additionaldetails are provided in the problem statement.
Find: Discharge.
Assumptions: Negligible velocity in the reservoir and negligible energy loss. Thenthe channel entrance will act like a broad crested weir.
APPROACH
Apply the Broad crested weir—Discharge equation.
ANALYSIS
Broad crested weir—Discharge equation
] = 0!545&)243*2
where 2 = 4 m and 4 = 3 m. Then
] = 0!545&9!81× 4× 33*2
= 35.5 m2/s
1332
PROBLEM 15.25
Situation: A small wave is produced in a pond.Pond depth = 8 in.
Find: Speed of the wave.
APPROACH
Apply the wave celerity equation.
ANALYSIS
Wave celerity
, =&)?
=q32!2 ft2$ s× 8$12 ft
= 4.63 ft/s
1333
PROBLEM 15.26
Situation: A small wave travels in a pool of water.Depth of water is constant.Wave speed = 1!5m$ s!
Find: Depth of water.
APPROACH
Apply the wave celerity equation.
ANALYSIS
Wave celerity
, =&)?
1!5 =p9!81?
? = 0!23 m
1334
PROBLEM 15.27
Situation: As ocean waves approach a sloping beach, they curve so that they arealigned parallel to the beach.
Find: Explain the observed phenomena.
APPROACH
Apply the wave celerity equation.
ANALYSIS
As the waves travel into shallower water their speed is decreased.Wave celerity
, =&)?
Therefore, the wave in shallow water lags that in deeper water. Thus, the wave creststend to become parallel to the shoreline.
1335
PROBLEM 15.28
Situation: A ba#ed ramp is used to dissipate energy in an open channel–additionaldetails are provided in the problem statement.
Find: (a) Head that is lost.(b) Power that is dissipated.(c) Horizontal component of the force exerted by ramp on the water.
Assumptions: The kinetic energy correction factors are % 1!0! E positive in thedirection of ow.
APPROACH
Let the upstream section (where ? = 3 ft) be section 1 and the downstream section(? = 2 ft) be section 2. Solve for the velocities at 1 and 2 using the ow rate equation.Then apply the energy equation and power equation. Determine the force of rampby writing the momentum equation between section 1 and 2. Let H$ be the force ofthe ramp on the water.
ANALYSIS
Flow rate equation
, = ]$I
,1 = 18$3
= 6 ft/s
,2 = 18$2
= 9 ft/s
Energy equation
?1 + T1,21 $2) + R1 = ?2 + T2,
22 $2) + R2 + ME
3 + 62$(2× 32!2) + 2 = 2 + 92$(2× 32!2) + MEME = 2!30 ft
Power equation
* = ](ME$550
= 18× 62!4× 2!3$550
* = 4.70 horsepower
1336
Momentum principle
XH$ = #^(,2$ " ,1$)
(?21$2" (?22$2 + H$ = 1!94× 18(9" 6)
(62!4$2)(33 " 22) + H$ = 104!8
H$ = "51!2 lbf
The ramp exerts a force of 51.2 lbf opposite to the direction of ow.
1337
PROBLEM 15.29
Situation: Water ows out a reservoir, down a spillway and then forms a hydraulicjump near the base of the spillway.Flow rate is ^ = 2!5m3$ s per m of width.Additional details are provided in the problem statement.
Find: Depth downstream of hydraulic jump.
APPROACH
Apply the specic energy equation to calculate ?1. Then calculate Froude numberin order to apply the Hydraulic jump equation.
ANALYSIS
Specic Energy
?0 + ^2$(2)?20) = ?1 + ^
2$(2)?21)
5 + 2!52$(2(9!81)52) = ?1 + 2!52$(2(9!81)?21)
?1 = 0!258 9 m
Froude number
H31 =^p)?31
=2!5p
9!81(0!258 9)3
= 6! 059
Hydraulic jump equation
?2 = (?1$2)
µq1 + 8H 21 " 1
¶
= (0!258 9$2)³p
1 + 8(6! 0592)" 1´
= 2.09 m
1338
PROBLEM 15.30
Situation: Water ows out a sluice gate–additional details are provided in the prob-lem statement.
Find: (a) Determine if a hydraulic jump can exist.(b) If the hydraulic jump can exist, calculate the depth downstream of the jump.
APPROACH
Calculate Froude number, then apply the hydraulic jump equation.
ANALYSIS
Calculate Froude number
H3 =,&)?
=^p)?3
=3!6m2$ s
&9!81× 0!33m2$ s
= 7!00
Thus, a hydraulic jump can occur.Hydraulic jump equation
?2 = (?1$2)
µq1 + 8H 21 " 1
¶
= (0!3$2)³&1 + 8× 72 " 1
´
?2 = 2. 82 m
1339
PROBLEM 15.31
Situation: A dam and spillway are described in the problem statement.
Find: Depth of ow on the apron just downstream of the hydraulic jump.
Assumptions: ,0 is negligible; kinetic energy correction factors are negligible.
APPROACH
First develop the expression for ?1 and ,theor.!Begin by applying the energy equationfrom the upstream pool to ?1. Then nd ^ by applying the rectangular weir equation.Then solve for the depth of ow on the apron by applying the hydraulic jump equation.
ANALYSIS
Energy equation
T0,20 $2) + R0 = T1,
21 $2) + R1
0 + 100 = , 2theor.$2) + ?1 (1)
But
,theor = ,act$0!95 (2)
and
,act. = ^$?1 (3)
Consider a unit width of spillway. ThenRectangular weir equation
^ = ]$2 = <p2)4145
= 0!5p2)(5145)
^ = 44!86 cfs/ft (4)
Solving Eqs. (1), (2), (3), and (4) yields
?1 = 0!59 ft
1340
and,act. = 76!03bP$9
Froude number
H31 = ,$&)?1
= 76!03$p(32!2)(0!59)
= 17!44
Hydraulic jump equation
?2 = (?1$2)((1 + 8H321)045 " 1)
= (0!59$2)((1 + 8(17!442))045 " 1)
?2 = 14.3 ft
1341
PROBLEM 15.32
Situation: A hydraulic jump is described in the problem statement.
Find: Depth upstream of the hydraulic jump.
APPROACH
Apply the hydraulic jump equation.
ANALYSIS
Hydraulic jump equation
?2 = (?1$2)((1 + 8H321)045 " 1)
where Froude number
H321 = ,21 $()?1) = ^
2$()?31)
Then
?2 = (?1$2)((1 + 8^2$()?31))
045 " 1)?2 " ?1 = (?1$2)[((1 + 8^
2$()?31))045 " 1" 2]
However
?2 " ?1 = 14!0 ft (given)
^ = 65 ft2$s
Therefore
14!0 ft = (?1$2)[((1 + 8× 652$()?31))045 " 1)" 2]
?1=1.08 ft
1342
PROBLEM 15.33
Situation: An obstruction in a channel causes a hydraulic jump.On the upstream side of the jump: ,1 = 8m$ s ?1 = 0!40m!
Find: Depth of ow downstream of the jump.
APPROACH
Calculate the upstream Froude number. Then apply the Hydraulic jump equationto nd the downstream depth.
ANALYSIS
Froude number
H31 =,&)?1
=8
&9!81× 0!4
= 4! 039
Hydraulic jump equation
?2 =?12
·q1 + 8H321 " 1
¸
=0!40
2
h&1 + 8× 4! 0392 " 1
i
?2 = 2.09 m
1343
PROBLEM 15.34
Situation: A hydraulic jump is described in the problem statement.( = 9' 810 N/m2' D3 = 5 m, ?1 = 40 cm= 0!40 m.
Find: Depth of ow downstream of jump.
ANALYSIS
Check H3 upstream to see if the ow is really supercritical ow. Then apply themomentum principle.
H3 = ,$()1)045
1 = I$&
= (D? + ?2)$(D + 2?)
13 = 044 = (5× 0!4 + 0!42)$(5 + 2× 0!4)= 0!372 m
Then
H31 = 10 m/s/((9!81 m/s2)(0!372))045
H31 = 5!23
so ow is supercritical and a jump will form. Applying the momentum equation (Eq.15.23):
%1I1 + #],1 = %2I2 + #],2 (1)
Evaluate %1 by considering the hydrostatic forces on the trapezoidal section dividedinto rectangular plus triangular areas as shown below:
Then
%1I1 = %=I= + %>I> + %)I)
= ((?1$3)(?21$2) + ((?1$2) D?1 + ((?1$3)(?
21$2)
= ((?31$6) + (D(?21$2) + ((?
31$6)
= ((?31$3) + (D(?21$2)
%1I1 = (((?31$3) +D(?21$2))
Also
1344
#],1 = #]]$I1 = #]2$I1
Equation (1) is then written as
(((?31$3) + (D(?21$2)) + #]
2$I1 = (((?32$3) +D(?
22$2)) + #]
2$(D?2 + ?22)
Flow rate equation
] = ,1I1 = 21!6 m3/s
I1 = 5× 0!4 + 0!42 = 2!16 m2
Solving for ?2 yields: ?2 = 2!45 m
1345
PROBLEM 15.35
Situation: A hydraulic jump occurs in a wide rectangular channel.The upstream depth is ?1 = 0!5 ft!The downstream depth is ?2 = 10 ft!
Find: Discharge per foot of width of channel.
APPROACH
Apply the Hydraulic jump equation to solve for the Froude number. Next, use thevalue of the Froude number to solve for the discharge ^.
ANALYSIS
Hydraulic jump equation
?2 =?12
·q1 + 8H321 " 1
¸
12 =0!5
2
·q1 + 8× H321 " 1
¸
Solve the above equation for Froude number.
H31 = 14!49
Froude number
H31 =^p)?31
14!49 =^
&32!2× 0!53
Solve the above equation for ^
^ = 29!07 ft2/s
1346
PROBLEM 15.36
Situation: A rectangular channel has three di!erent reaches–additional details areprovided in the problem statement.
Find: (a) Calculate the critical depth and normal depth in reach 1.(b) Classify the ow in each reach (subcritical, critical or supercritical).(c) For each reach, determine if a hydraulic jump can occur.
APPROACH
Apply the critical depth equation. Determine jump height and location by applyingthe hydraulic jump equation.
ANALYSIS
Critical depth equation
?1 = (^2$))1*3
^ = 500$20 = 25 cfs/ft
?1 = (252$32!2)1*3 = 2.69 ft
Solving for ?:I1yields 1!86 ft.Thus one concludes that the normal depth in each reach is
• Supercritical in reach 1
• Subcritical in reach 2
• Critical in reach 3
If reach 2 is long then the ow would be near normal depth in reach 2. Thus, theow would probably go from supercritical ow in reach 1 to subcritical in reach 2. Ingoing from sub to supercritical a hydraulic jump would form.
Hydraulic jump equation
?2 = (?1$2)((1 + 8H321)045 " 1)
H31 = ,1$()?1)045 = (25$1!86)$(32!2× 1!86)045 = 1!737
?2 = (1!86$2)((1 + 8× 1!7372)045 " 1) = 3.73 ft
Because ?2 is less than the normal depth in reach 2 the jump will probably occur inreach 1. The water surface prole could occur as shown below.
1347
1348
PROBLEM 15.37
Situation: Water ows out a sluice gate and then over a free overfall–additionaldetails are provided in the problem statement.
Find: (a) Determine if a hydraulic jump will form.(i) If a jump forms, locate the position.(ii)If a jump does not form, sketch the full prole and label each part.
(b) Sketch the EGL
APPROACH
Check Froude numbers. Then determine ?1 for a ?2 of 1.1 m by applying the hydraulicjump equation.
ANALYSIS
Froude number
H31 = ,1$&)?1 = 10$
&9!81× 0!10 = 10!1 (supercritical)
,2 = ^$?2 = (0!10 m) (10 m/s)/(1.1 m) = 0!91 m/s
H32 = ,2$()?2)045 = 0!91$(9!81× 1!1)045 = 0!277
A hydraulic jump will form because ow goes from supercritical to subcritical.Hydraulic jump equation
?1 = (?2$2)((1 + 8H322)045 " 1)
= (1!1$2)((1 + 8× !2772)045 " 1)?1 = 0!14 m
Therefore the jump will start at about the 29 m distance downstream of the sluicegate. Prole and energy grade line:
1349
PROBLEM 15.38
Situation: Water ows out a sluice gate and then over a free overfall–additionaldetails are provided in the problem statement.
Find: Estimate the shear stress on the bottom of the channel 0.5 m downstream ofthe sluice gate.
Assumptions: The ow can be idealized as boundary layer ow over a at plate,where the leading edge of the plate is located at the sluice gate.
APPROACH
Apply the local shear stress equation.
ANALYSIS
Reynolds number
Re$ =, E
:
=10× 0!510"6
= 5× 106
Since Re$ F 500' 000, the boundary layer would be turbulent. The most appropriatecorrelation is given by Eq. (9.52a):
Z( =0!455
ln2 (0!06Re$)
=0!455
ln2 (0!06× 5× 106)= 0!00286
Local shear stress
B ! = Z(#, 2
2
= 0!002861000× 102
2= 143Pa
Therefore, the correct choice is (d) B F 40 N/m2
1350
PROBLEM 15.39
Situation: Water ows out of sluice gate and then through a hydraulic jump–additional details are provided in the problem statement.
Find: Horsepower lost in hydraulic jump.
Assumptions: Negligible energy loss for ow under the sluice gate.
APPROACH
Apply the Bernoulli equation from a location upstream of the sluice gate to a locationdownstream. Then, calculate the Froude number and apply the equations that governa hydraulic jump. Calculate the power using * = ](ME$550, where the number"550" is a unit conversion.
ANALYSIS
Bernoulli equation
?0 + ,20 $2) = ?1 + ,
21 $2)
65 + neglig. = 1 + , 21 $2)
,1 =&64× 64!4 = 64!2 ft/s
Froude number
H31 = ,1$&)?1
= 64!2$&32!2× 1
= 11!3
Hydraulic jump equations
?2 = (?1$2)(q1 + 8H 21 " 1)
= (1$2(&1 + 8× 11!32 " 1)
= 15!5 ft
ME = (?2 " ?1)3$(4?1?2)= (14!51)3$(4× 1× 15!51)= 49.2 ft
Power equation
* =](ME550
=(64!2× 1× 5)× 62!4× 49!2
550
= 1793 horsepower
1351
PROBLEM 15.40
Situation: A ume is to be designed. This ume will be used to verify the hydraulicjump relationships given in Section 15.2.
Find: Basic specications of the ume.
ANALYSIS
For this experiment, it is necessary to produce supercritical ow in the ume andthen force this ow to become subcritical. The supercritical ow could be producedby means of a sluice gate as shown in Prob. 15.39 and the jump could be forced bymeans of another sluice gate farther down the ume. Therefore, one needs to includein the design an upstream chamber that will include a sluice gate from which the highvelocity ow will be discharged.
The relevant equation for the hydraulic jump is Eq. (15.28). To verify this equation?1' ?2 and ,1 can be measured or deduced by some other means. A fairly accuratemeasurement of ?2 can be made by means of a point gage or piezometer. The depth?1 could also be measured in the same way; however, the degree of accuracy of thismeasurement will be less than for ?2 because ?1 is much smaller than ?2. Perhaps amore accurate measure of ?1 would be to get an accurate reading of the gate openingof the sluice gate and apply a coe"cient of contraction to that reading to get ?1. The-) for a sluice gate could be obtained from the literature.
The velocity, ,1, which will be needed to compute HK1, can probably be best calculatedby the Bernoulli equation knowing the depth of ow in the chamber upstream of thesluice gate. Therefore, a measurement of that depth must be made.
Note that for use of ,1 and ?1 just downstream of the sluice gate, the hydraulicjump will have to start very close to the sluice gate because the depth will increasedownstream due to the channel resistance. The jump location may be changed byoperation of the downstream sluice gate.
COMMENTS Other things that could or should be considered in the design:
A. Choose maximum design discharge. This will be no more than 5 cfs (see Prob.13.77).
B. Choose reasonable size of chamber upstream of sluice gate. A 10 ft depth wouldbe ample for a good experiment.
C. Choose width, height and length of ume.
D. Work out details of sluice gates and their controls.
1352
PROBLEM 15.41
Situation: Water ows in a rectangular channel.A sill installed on the bottom of the channel forces a hydraulic jump to occur.Additional details are provided in the problem statement.
Find: Estimate the height of hydraulic jump (the height is the change in elevation ofthe water surface).
Assumptions: Q = 0!012!
APPROACH
Calculate Froude number in order to apply the Hydraulic jump equation.
ANALYSIS
, = (1$Q)"2*361*20
" = I$* = (0!4× 10)$(2× 0!4 + 10) = 0!370 m, = (1$0!012)(0!370)2*3 × (0!04)1*2 = 8!59 m/s
Froude number
H31 = ,$&)?1
= 8!59$&9!81× 0!40
= 4!34 (supercritical)
Hydraulic jump equation
?2 = (?1$2)(q1 + 8× H 21 " 1)
= (0!40$2)(p1 + 8× (4!34)2 " 1)
?2 = 2.26 m
1353
PROBLEM 15.42
Situation: Water ows in a rectangular channel.A sill installed on the bottom of the channel forces a hydraulic jump to occur.Additional details are provided in the problem statement.
Find: (a) Estimate the shear force associated with the jump.(b) Calculate the ratio H&$H6 , where H& is shear force and H6 is the net hydrostaticforce acting on the jump.
Assumptions: (a) The shear stress will be the average of B 01 (associated with uniformow approaching the jump), and B 02 (associated with uniform ow leaving the jump).(b) The ow may be idealized as normal ow in a channel.
APPROACH
Apply the local shear stress equation 10.21 and calculate the Reynolds numbers.Then nd ,2 by applying the same solution procedure from problem 15.41. Thenestimate the total shear force by using an average shear stress.
ANALYSIS
Local shear stress
B 0 = b#,2$8
where b = b(Re' c&$4")
"G1 = ,1(4"1)$: "G2 = ,2 × (4"2)$:
From solution to Prob. 15.41
,2 = ,1 × 0!4$2!26 = 1!52 m/s
"G1 = 8!59× (4× 0!37)$10"6 "2 = I$* = (2!26× 10)$(2× 2!26 + 10) = 1!31 m"G1 = 1!3× 107 "G2 = 1!52× (4× 1!56)$10"6 = 9!5× 106
Assume c& = 3× 10"3 m
c&$4"1 = 3× 10"3$(4× 0!37) c&$4"2 = 3× 10"3$(4× 1!56)c&$4"1 = 2× 10"3 c&$4"2 = 4!8× 10"4
From Fig. 10-8, b1 = 0!024 and b2 = 0!017! Then
B 01 = 0!024× 1' 000× (6!87)2$8 B 02 = 0!017× 1' 000× (1!52)2$8B 01 = 142 N/m
2 B 02 = 4!9 N/m2
B avg = (142 + 4!9)$2 = 73 N/m2
1354
Then
H& = B avgI& = B avg*2
where 2 ! 6?2' * ! D + (?1 + ?2)! Then
H2 ! 73(10 + (0!40 + 2!26))(6× 2!26)= 10' 790 N
H6 = (($2)(?22 " ?21)D
= (9' 810$2)((2!26)2 " (0!40)2)× 10= 242' 680 N
Thus
H&$H6 = 10' 790$242' 680
= 0.044
COMMENTS
The above estimate is probably inuenced too much by B 01 because shear stress willnot be linearly distributed. A better estimate might be to assume a linear distributionof velocity with an average b and then integrate B 0AI from one end to the other.
1355
PROBLEM 15.43
Situation: Water ows out of a sluice gate–additional details are provided in theproblem statement.
Find: (a) Determine the type of water surface prole that occurs downstream of thesluice gate.(b) Calculate the shear stress on bottom of the channel at a horizontal distance of0.5 m downstream from the sluice gate.
Assumptions: The ow can be idealized as a boundary layer ow over a at plate,with the leading edge of the boundary layer located at the sluice gate.
APPROACH
Apply the hydraulic jump equation by rst calculating ^ applying the ow rate equa-tion. Then apply the local shear stress equation.
ANALYSIS
Flow rate equation
^ = 0!40× 10
= 4!0m2
s
Hydraulic jump equation
?1 = 3p^2$)
= 3p(4!0)2$9!81
= 1!18m
Then we have ? G ?: G ?1; therefore, the water surface prole will be an 63!Reynolds number
Re$ ! , × 0!5$:Re$ = 10× 0!5$10"6
= 5× 106
The local shear stress coe"cient is
Z( =0!455
ln2 (0!06Re$)
=0!455
ln2 (0!06× 5× 106)= 0!00286
1356
Local shear stress
B 0 = Z(#, 202
= 0!00286998× 102
2
= 143 N/m2
1357
PROBLEM 15.44
Situation: Water ows in a rectangular channel–additional details are provided inthe problem statement.
Find: Classify the water surface prole asa.) S1b.) S2c.) M1d.) M2
ANALYSIS
?: = 2 ft
?1 = (^2$))1*3 = (102$32!2)1*3 = 1!46 ft.
? F ?: F ?1
From Fig. 15-16 the prole is M1. Thus, the correct choice is c.
1358
PROBLEM 15.45
Situation: Water ows in a rectangular channel–additional details are provided inthe problem statement.
Find: Classify the water surface prole asa.) M2b.) S2c.) H1d.) A2
ANALYSIS
The correct choice is d).
1359
PROBLEM 15.46
Situation: The problem statement shows a partial sketch of a water-surface prole.
Find: (a) Sketch the missing part of the water prole.(b) Identify the various types of proles.
APPROACH
Check the Froude number at points 1 and 2. Apply the Broad crested weir—Dischargeequation to calculate ?2 for the second Froude number.
ANALYSIS
Froude number
H31 = ^$p)?3
= (5$3)$p9!81(0!3)3
= 3!24 F 1(supercritical)
Broad crested weir—Discharge equation
] = (0!40 + 0!054$* )2p2)43*2
5 = (0!40 + 0!054$1!6)× 3p2(9!81)43*2
Solving by iteration gives 4 = 0!917 m. Depth upstream of weir = 0!917+1!6 = 2!52m
H2 = (5$3)$p9!81(2!52)3 = 0!133 G 1 (subcritical)
Therefore a hydraulic jump forms.Hydraulic jump equation
?2 = (?1$2)(q1 + 8H 21 " 1)
?2 = (0!3$2)(p1 + 8(3!24)2 " 1)
?2 = 1!23m
1360
PROBLEM 15.47
Situation: A rectangular channel ends with a free overfall–additional details areprovided in the problem statement.
Find: Determine the classication of the water surface just before the brink of theoverfall.
ANALYSIS
The prole might be an + prole or an 6 prole depending upon whether the slopeis mild or steep. However, if it is a steep slope the ow would be uniform right tothe brink. Check to see if + or 6 slope. assume Q = 0!012
] = (1!49$Q)I"046676045
I"2*3 = ]$((1!49$Q)(6045));
= 120$((1!49$0!012)(0!0001)045)
(>?)(>?$(10 + 2?))4667 = 96!6
With > = 10 ft we can solve for ? to obtain ? = 5!2 ft.Flow rate equation
, = ]$I
= 120$32
= 2!31 ft/s
Froude number
H3 = ,$&)?
= 2!31$(p32!2× 5!2)
= 0!18 (subcritical)
Therefore, the water surface prole will be an M2.
1361
PROBLEM 15.48
Situation: Water ows out a sluice gate and thorough a rectangular channel.A weir will be added to the channel.Additional details are provided in the problem statement.
Find: (a) Determine if a hydraulic jump will occur.(b) If a jump form, calculate the location.(c) Label any water surface proles that may be classied.
ANALYSIS
Rectangular weir equation
] = <p2)243*2
where < = 0!40 + 0!054$* . By trial and error (rst assume < then solve for 4,etc.) solve for 4 yield 4 = 2!06 ft.Flow rate equation
, = ]$I
= 108$(4!06× 10)= 2!66 ft/s
Froude number
H3 = ,$&)?
= 2!66$(32!2× (4!06))045
= 0!23 (subcritical)
The Froude number just downstream of the sluice gate will be determined:Flow rate equation
, = ]$I
= 108$(10× 0!40)= 27 ft/s
Froude number
H3 = ,$&)?
= 27$&32!2× 0!40
= 7!52 (supercritical)
Because the ow is supercritical just downstream of the sluice gate and subcriticalupstream of the weir a jump will form someplace between these two sections.
Now determine the approximate location of the jump. Let ?2 = depth downstreamof the jump and assume it is approximately equal to the depth upstream of the weir
1362
(? ! 4!06 ft). By trial and error (applying the hydraulic jump equation 15.25))it can be easily shown that a depth of 0.40 ft is required to produce the given ?2.Thus the jump will start immediately downstream of the sluice gate and it will beapproximately 25 ft long. Actually, because of the channel resistance ?2 will besomewhat greater than ?2 = 4!06 ft; therefore, the jump may be submerged againstthe sluice gate and the water surface prole will probably appear as shown below.
1363
PROBLEM 15.49
Situation: A rectangular channel is described in the problem statement.
Find: (a) Sketch all possible water-surface proles.(b) Label each part of the water-surface prole with its classication.
APPROACH
Apply the critical depth equation to determine if a hydraulic jump will form.
ANALYSIS
Critical depth equation
?1 = 3p^2$)
= 3p202$32!2
= 2!32 ft
Thus the slopes in parts 1 and 3 are steep.
If part 2 is very long, then a depth greater than critical will be forced in part 2 (thepart with adverse slope). In that case a hydraulic jump will be formed and it mayoccur on part 2 or it may occur on part 1. The other possibility is for no jump toform on the adverse part. These three possibilities are both shown below.
1364
PROBLEM 15.50
Situation: Water ow through a sluice gate and down a rectangular channel is de-scribed in the problem statement.
Find: Sketch the water surface prole until a depth of 60 cm. is reached.
ANALYSIS
Froude number
H31 = ^$p)?3
= 3$p9!81(0!2)3 = 10!71
H32 = 3$p9!81(0!6)3 = 2!06
Therefore the prole is a continuous 43 prole.
? ? , , N !N 6( !E E0.2 15 11.6678 0
0.25 12.5 6.2710 0.1593 39.40.3 10 5.3968 39.4
0.35 8.75 2.1298 0.0557 38.20.4 7.5 3.2670 77.6
0.45 6.75 0.9321 0.0258 36.10.5 6.0 2.3349 113.7
0.55 5.5 0.4607 0.0140 32.90.6 5.0 1.8742 146.6
1365
PROBLEM 15.51
Situation: A horizontal channel ends in a free outfall–additional details are providedin the problem statement.
Find: Water depth 300 m upstream of the outfall.
APPROACH
Apply the critical depth equation. Then carry out a step solution for the proleupstream from the brink.
ANALYSIS
^ = ]$D
= 12$4 = 3 m3/s/m
?1 = 3p^2$)
= 0!972 m (This depth occurs near brink.)
Reynolds number
Re ! , × 4"$: ! 3× 1$10"6 ! 3× 106
c&$4" ! 0!3× 10"3$4 ! 0!000075b ! 0!010
See solution table below.
1366
Section number upstream of yc
Depth y,m
Velocity atsection V,m/s
Mean Velocity in reach
(V1+V0)/2 V2Hydraulic Radius
R=A/P,m
Mean Hydraulic Radius
Rm=(R1+R2)/2sf=fV2
mean/8gRmean
"x=((y2+V22/2g)-
(y1+V1/2g))/Sf
Distance upstream from brink x,m
1 at y=yc 0.972 3.086 0.654 3.9m
3.073 9.443 0.656 1.834 x 10-3 0.1m 4.0m2 0.980 3.060 0.658
3.045 9.272 0.660 1.790 x 10-3 0.4m 4.4m3 0.990 3.030 0.662
2.986 8.916 0.669 1.698 x 10-3 1.7m 6.1m4 1.020 2.941 0.675
2.886 8.327 0.684 1.551 x 10-3 4.7m 10.9m5 1.060 2.830 0.693
2.779 7.721 0.701 1.403 x 10-3 7.7m 18.6m6 1.100 2.727 0.710
2.613 6.828 0.730 1.192 x 10-3 33.2m 51.8m7 1.200 2.500 0.750
2.404 5.779 0.769 9.576 x 10-4 55.3m 107.1m8 1.300 2.308 0.788
2.225 4.951 0.806 7.83 x 10-4 80.0m 187.1m9 1.400 2.143 0.824
2.072 4.291 0.841 6.501 x 10-4 107.4m 294.5m10 1.500 2.000 0.857The depth 300 m upstream is approximately 1.51 m
Solution Table for Problem 15.51
1367
PROBLEM 15.52
Situation: Water ows through a sluice gate, down a channel and across a hydraulicjump.Additional details are provided in the problem statement.
Find:(a) Determine the water-surface prole classication
i) Upstream of the jump.ii) Downstream of the jump.
(b) Determine how the addition of ba#e block will e!ect the jump.
ANALYSIS
Upstream of the jump, the prole will be an 43.Downstream of the jump, the prole will be an 42.The ba#e blocks will cause the depth upstream of I to increase; therefore, the jumpwill move towards the sluice gate.
1368
PROBLEM 15.53
Situation: Water ows out of a reservoir, down a spillway and then over an outfall.Additional details are provided in the problem statement.
Find: Discharge in the channel.
Assumptions: ,1 = 0 and T2 = 1!0!
APPROACH
Apply the energy equation from the reservoir, (1), to the entrance section (2) and setthe Froude number equal to 1 (critical ow) to solve for ?1 and ,1. Then calculatethe discharge by applying the ow rate equation.
ANALYSIS
The channel is steep; therefore, critical depth will occur just inside the channel en-trance.Energy equation
?1 + T1,21 $2) = ?2 + T2,
22 $2)
Then
2 = ?2 + ,22 $2)
Froude number
, 22 $2) = , 21 $2) (1)
= 0!5?1
The energy equation becomes?1 = ?1 + 0!5?1
Let ?1 = 2m and solve for ?1
?1 = 2m$1!5 = 1!33 m
From Eq. (1)
, 21 $) = ?1
= 1!33
or ,1 = 3!62 m/s
1369
Flow rate equation
] = ,1I2
= 3!62× 1!33× 4] = 19!2 m3/s
1370
PROBLEM 15.54
Situation: Water ows out a reservoir and down a channel.
Find: (a) Estimate the discharge.(b) Describe a procedure for calculating the discharge if the channel length was 100m.
Assumptions: Uniform ow is established in the channel except near the downstreamend. Q = 0!012 .
APPROACH
Apply the energy equation from the reservoir to a section near the upstream endof the channel to solve for , . Then apply the ow rate equation to calculate thedischarge.
ANALYSIS
(a) Energy equation
2!5 ! , 2: $2) + ?: (1)
Also
,: = (1$Q)"2*361*2
, 2: $2) = (1$Q2)"4*36$2) (2)
where
" = I$* = 3!5?:$(2?: + 3!5) (3)
Then combining Eqs. (1), (2) and (3) we have
2!5 = ((1$Q2)((3!5?:$(2?: + 3!5))4*36$2)) + ?: (4)
Assuming Q = 0!012 and solving Eq. (4) for ?: yields: ?: = 2!16 m; also solving (2)yields ,: = 2!58 m/s. Then
] = , I
= 2!58× 3!5× 2!15] = 19!5 m3/s
(b) With only a 100 m-long channel, uniform ow will not become established in thechannel; therefore, a trial-and-error solution is required. Critical depth will occurjust upstream of the brink, so assume a value of ?1, then calculate ] and calculatethe water surface prole back to the reservoir. Repeat the process for di!erent valuesof ?1 until a match between the reservoir water surface elevation and the computedprole is achieved.
1371
PROBLEM 15.55
Situation: During ood ow, water ows out of a reservoir.
Find: Calculate the water surface prole upstream from the dam until the depth issix meters.
APPROACH
Apply the critical depth equation. Then carry out a step solution for the proleupstream from the dam.
ANALYSIS
^ = 10 m3/s/m
?1 = 3p^2$)
= 3p102$9!81
= 2!17 m
? ? , , N !N 6(×104 !E E elev.52.17 0.1917 52.170 0 52.17
51.08 0.1958 2.168 0.00287 -5,42950 0.20 50.002 5,430 52.17
45 0.2222 9.999 0.00419 -25,02440 0.25 40.003 -30,450 52.18
35 0.2857 9.997 0.00892 -25,04830 0.333 30.006 -55,550 52.22
25 0.400 9.993 0.02447 -25,14620 0.50 20.013 -80,650 52.26
15 0.6667 9.962 0.11326 -25,63110 1.00 10.051 -106,280 52.51
9 1.1111 1.971 0.5244 -5,6718 1.25 8.080 -111,950 52.78
7 1.4286 1.938 1.1145 -6,7166 1.667 6.142 -118,670 53.47
1372
PROBLEM 15.56
Situation: Water ows in a wide rectangular concrete channel.Additional details are provided in the problem statement.
Find: Determine the water surface prole from section 1 to section 2.
Assumptions: Q = 0!015' < = 0!42' c& = 0!001 ft so c&$4" = 0!00034!
APPROACH
Determine whether the uniform ow in the channel is super or subcritical. Determine?: and then see if for this ?: the Froude number is greater or less than unity. Thenapply the hydraulic jump equation to get ?2. Then apply the Rectangular weirequation to nd the head on the weir. A rough estimate for the distance to where thejump will occur may be found by applying Eq. (15.35) with a single step computation.A more accurate calculation would include several steps.
ANALYSIS
Froude number
] = (1!49$Q)I"2*361*2
12 = (1!49$0!015)× ? × ?2*3 × (0!04)1*2
?: = 0!739 ft and , = ]$?: = 16!23 ft/s
H = ,$&)?: = 3!33
Solving for ?: gives ?: = 0!739 ft and
, = ]$?: = 16!23 ft/s
Therefore, uniform ow in the channel is supercritical and one can surmise that ahydraulic jump will occur upstream of the weir. One can check this by determiningwhat the sequent depth is. If it is less than the weir height plus head on the weirheight plus head on the weir then the jump will occur.
Now nd sequent depth:
?2 = (?1$2)(q1 + 8H 21 " 1)
= (0!739$2)(&1 + 8× 3!332 " 1)
?2=3.13 ft
Rectangular weir equation
] = <p2)243*2
12 = 0!42&64!4× 1×43*2
4 = 2!33 ft
4$* = 2!33$3 = 0!78
1373
so
< = 0!40 + 0!05× 0!78
A better estimate is4 = 2!26 ft < = 0!44
Then depth upstream of weir = 3 + 2!26 = 5!56 ft. Therefore, it is proved that ajump will occur.
The single-step calculation is given below:
!E = ((?1 " ?2) + (, 21 " ,22 ))$2)$(6( " 60)
where ?1 = 3!13 ft; ,1 = ^$?1 = 12$3!13 = 3!83 ft/s; , 21 = 14!67 ft2/s2 and ?2 = 5!56
ft; ,2 = 2!16 ft/s.
, 22 = 4!67 ft2$s2
6( = b, 2avg$(8)"avg)
,avg = 3!00 ft/s
"avg = 4!34 ft
Assuming c& = 0!001 ft so c&$4" = 0!00034!
Re = , × 4"$: = ((3!83 + 2!16)$2)× 4× 4!34$(1!22× 10"5) = 4!33× 106
Thenb = 0!015
and
6( = 0!015× 3!02$(8× 32!2× 4!34) = 0!000121
!E = ((3!13" 5!56) + (14!67" 4!67)$(64!4))$(0!000121" 0!04) = 57.0 ft
Thus, the water surface prole is shown below:
1374