Specialty Welding,Fabrication / Installation
and Mechanical Services
526 Kentucky St.South Houston, TX 77587
Office: 713.946.1361Fax: 713.946.1471
MANAGEMENT & PLANNING
Tar Scope Development and site logistical planning
Tar Planning, Estimating, Eng. Support and Scheduling
Tar Logistics, support, lifts, density integration
Capital Project Planning, Estimating and support crafts
Capital Project Integration and Schedule
Shop Fabrication, Pipe, Structure and Mechanical
Project Management Structure
Scope Development and Estimating
Field Verification and Walk down
Man Power staffing schedule ( duration, tools, support )
Site Logistic and Site Location, ( identify simops )
Site Working Plan ( Plot Plan )
Duration Planning and Man Power ( Extended support )
Support Planning and Schedule ( Define Scope )
Overall Craft and Project Integrated Schedule
Balance Man Power to Estimate
Balance Schedule to Manpower
Balance Estimate, Schedule, Manpower
Management Expertise & Capabilities
UNMATCHED Safety, Quality& Productivity
Founded in 2011, JEGON Industrial Services LLC. has been key
producers in the Petro chemical industry in all aspects specialty
welding in the USA and international. Experts in pipe and
equipment fabrication, field construction services, Turnaround
and capital project planning and execution. JEGON is an
industry leader in safety and performance and we maintain
a tremendous track record completing projects. JEGON hosts
200 years combined Industrial experience.
COMPANY GOALS
Who We Are
“Exceeding Customer Expectations with Expertise, Trust, and Quality”
WHAT WE BELIEVE “SAFETY ALWAYS”
Our Capabilities
Full Turnaround capabilities
General Mechanical
Maintenance Staff Augmentation for full project support
Mobile high experience Staff for emergency reparation
and construction in the field
Specialty Welding
SAFETY, QUALITY, ON TIME & WITHIN BUDGET
What We Perform
Overlays & Vessel Repairs
Furnace/ Heaters/ Boilers
Tubes and Convection Box
Stack and Flare
Towers/ Drums
Cyclones/ Dipleg/ Trickle-V
Heat Exchangers/ Re-Boilers
Air Coolers/ Fin-Fan/ Fan Motor
Service and Process Piping
Reactors/ Trays/ Downcomers
Compressors and Pumps
And More!
Services
Fabrication and Alteration
Pipe Repair and Installation
Installation and Removal of Blinds
Vessel, Drum and Tower Repairs/Upgrades
Valve Removal and Reinstallation
Field Fabrication
Turnarounds
Maintenance
Projects
Commission and De-commission
General Welding
JEGON insures all welding, including tack welding, will be performed using qualified welders in accordance with ASME Section (AWS) Standard Welding Procedures (SWPSs) listed in the NBIC may also be used. Welding Procedures Specifications (WPS) shall be prepared and qualified by the QCM. The QCM shall insure that all WPS’s are in compliance with ASME Section IX and the applicable code of construction.
JEGON insures all mechanical work will be performed as
specified by API and ASME standards for Manufacturers
Installation Specifications. The same process will be adhere
and used in the absence of a client or Engineering, furnished
procedure. All piping and equipment material will be verified
proper material grade, class of material, type of material,
and proper component installation.
When all work is completed and primary inspections has
been performed the craftsmen and field supervisors will
perform a final inspection and notify the QC inspector. The
QC sign off sheet shall be signed off by the QC inspector
and the client.
Production Welding, Welding Materials, Welding Records, Welding Inspections
Qualification of Welders , Welding Operations , building, repair and fabrication for API code compliance.
PRE/RE- Qualification of Welders, Maintenance of Welder Qualifications.
General Mechanical
QUALITY CONTROL MANAGEMENT
JEGON has a strong safety culture. Everybody at JEGON is
responsible for safety and pursues it on a daily basis, employees
go beyond “the call of duty” to identify unsafe conditions and
behaviors, and to intervene to correct them. Jegon
employees feel comfortable walking up to construction
managers or CEO’s and reminding him/her to wear their PPE.
The Goal is for all employees to take safety personal, own their
behavior, be true leaders for safety, with your “Personal Obligation”.
Likewise, we encourage and ask co-workers to be “your
brothers keeper”, routinely look out for one another and point
out all unsafe acts.