Specification Sheet / In-grade / L09
All technical information in this document is subject to change. Copyright © MP Lighting.www.mplighting.com t 1.877.708.1184 f 604.708.1185
L09Application Interior directional in-grade light for lighting walls, columns,
architectural features or landscape features. Applicable for mounting into floors, walls, ceilings or other surfaces where a non-obtrusive luminaire is required. Suitable for walk-over and drive-over applications. Recommended Projects - Commercial, Institutional, Retail, Clinic, Hospitality, Religious, Educational, Architecture
IP Rating 40
Mounting Comes with steel flange which mounts to pre-installed standard 4” (102mm) octagonal box, 1-1/2” (38mm) deep minimum and 1/4” (6mm) setback from face of drywall. Can be wall or ceiling mounted.
Electrical Powered by remote dimmable/non-dimmable driver( sold separately ).
*See website for recommended drivers *Remote emergency driver / inverter options available. Consult factory
Power Consumption
1.5 Watt (at 350 mA, 1.0 Watt)
3.0 Watt (at 700 mA, 2.5 Watt)
Light Output 1.0 Watt, 0.5~1lm2.5 Watt, 0.8~1.6lm
*For photometric data, see page 02
Warranty 5 years limited warrantyEstimated useful life of LED is 50,000 hours.
Material Solid anodized aluminum or stainless steel (316). RoHS compliant.
Weight 1.8lbs (0.816kg), base extra.
Approval
11-2017
Code Wattage Color Aperture Input Voltage Finish
L09 - -
1 = 1W 2 = 2.5W
S = singleD = double
D = DC A = 12V AC(AC available for W27S, W30S and W35S only)
MA = matte clear anodizedBA = black anodizedBZ = bronze anodizedS6 = stainless steel 316
W22S = 2200K, 80+CRIW27S = 2700K, 80+CRIW30S = 3000K, 80+CRIW35S = 3500K, 80+CRIW41S = 4100K, 80+CRIW20H = 2000K, 90+CRIW27H = 2700K, 90+CRIW30H = 3000K, 90+CRIW35H = 3500K, 90+CRI
Type:
Project:
Modified:
Quantity:
Notes:
Order Guide
Example: L09-2-W30-S-D-A-MA
DISCLAIMER - When using a control system, consult dimming system manufacturer with minimum load before installing 12V AC transformer. Malfunction and damage to product due to improper dimming system installation or misuse will not be covered under warranty. Only DC Drivers are recommended for dimming systems. Consult MP Lighting for recommended drivers.
*MP Lighting reserves the right, at its sole discretion, at any time and without notice, to make design changes to any of our products.
Ø1-5/8”Ø41mm
Ø4-1/8”Ø105mm
1/4”6mm
Standard flange7/8” (22mm)
Ø2-1/2”Ø64mm
Concrete pouring line
Base Height
4-7/8”124mm
2-3/4”70mm
Splice box with 1/2 NPT I/O ports for connector and wiring.
2”52mm
pavingstone
sand
5-1/2”140mm
Paving stoneflange3-5/8” (92mm)
Double aperture Single aperture
Specification Sheet / In-grade / L09
All technical information in this document is subject to change. Copyright © MP Lighting. 01-2018www.mplighting.com t 1.877.708.1184 f 604.708.1185
PHOTOMETRIC DATA:
DIMENSION:
1W, 3000K 80+CRI 2.5W, 3000K 80+CRI
0.5lm, Single Aperture 0.8lm, Single Aperture
1lm, Double Aperture 1.6lm, Double Aperture
Polar Candela Distribution Polar Candela DistributionIlluminance at a Distance Illuminance at a Distance
0°
180°
90°
45°-45°
-90°approx. 0.3 cdmax.
-0°
-90°
Mount height: 1 ft Total LLF: 1
2
1
0
1
2
2 1 0 1 2
0.05 fc
L081W, DoubleAperture3000K Std1 lm
Polar Candela Distribution Isofootcandle Plot
approx. 0.4 cdmax.
0°
180°
90°
45°-45°
-90°-0°
-90°
Mount height: 1 ft Total LLF: 1
2
1
0
1
2
2 1 0 1 2
0.05 fc
L082.5W, SingleAperture3000K Std0.8 lm
Polar Candela Distribution Isofootcandle Plot
approx. 0.4 cdmax.
0°
180°
45°
90°-90°
-45°-0°
-90°
Mount height: 1 ft Total LLF: 1
2
1
0
1
2
2 1 0 1 2
0.05 fc
L082.5W, Double Aperture3000K Std1.6 lm
Polar Candela Distribution Isofootcandle Plot
0°
180°
90°
45°-45°
-90°-0°
-90°
approx. 0.3 cdmax.
Mount height: 1 ft Total LLF: 1
2
1
0
1
2
2 1 0 1 2
0.05 fc
L081W, SingleAperture3000K Std0.5 lm
Polar Candela Distribution Isofootcandle Plot
pavingstone
sand
Paving stoneflange3-5/8” (91.2mm)
Ø1-7/8”Ø49mmØ5-1/2”
Ø140mm
Ø1-5/8”Ø41mm
trim3/16”5mm
Ø2-1/2”Ø64mm
2”51mm
2-3/4”70.8mm
7/8”22mm
Ø6-1/2”Ø165mm
Ø1-7/8”Ø49mm
Base Height
Ø6-1/2”Ø165mm
flange is positioned1/8”(3.17mm) max away
from the surface of dry wall
Electrical Box (site supplied)
surface of dry wallflange
Ø2-1/2”64mm
1-1/8”28.6mm
1-5/8”41mm
flange
Electrical Box (site supplied)
1-5/8”41mm
3-1/2”89mm
Ø4-1/8”Ø105mm
1-3/4”44mm
7/8”
Ø2-1/2”Ø64mm
Sq.7/8”22mm
Ø1-1/8”Ø29mm
Ø1-7/8”Ø48mm
Ø1-5/8”Ø41mm
1-15/16”49.5mm
Ø2-1/2”Ø62mm
trim 1/8”3.18mm
flange is positioned1/8”(3.17mm) max away
from the surface of dry wall