SPORTS | LEISURE Regupol®
www.berleburger.de
Shock Pads
Durable · Consistent · Recognised
Reliable shock attenuation underartificial turf installations
SPORTS | LEISURE
Unbound base-layer Engineered subbase
Artificial turf with sand andrubber infill composition
Regupol SP (prefabricated)
Regupol SP shock pad supplied in prefabricated rolls.
- standard version suitable for installation on unboundsubbases
- dimpled (profiled) version suitable for installation onengineered subbases, i.e. asphalt, featuring additionaldrainage properties
Regupol SP has specifically been developed for the useunder artificial turf systems with sand or sand and rubberinfill compositions. Regupol SP is versatile and can indivi-dually be formulated to meet project specific requirementsin regard to shock attenuation. Wherever specific characte-ristics on ball rebound, force reduction and other cushioningproperties are required, Regupol SP is the perfect solution.The proprietary Regupol SP formulation and productionprocess yield density and thickness consistencies that areunique in the sports surfacing industry.Recommended thickness range: 8 – 14 mm, dependingon system combination
Features and technical data:
Variable, subject to material composition and thickness.Please refer to our technical data sheets.
Natural ground
Artificial turf with sand or sand and rubber infill composition
Regupol SP Regupol SP dimpled
Standard type Regupol SP Dimpled type shown upside down
Regupol SP IS (in-situ)
Regupol E-Layer
Regupol SP IS is an in-situ type system. In contrast to theprefabricated shock pad, Regupol SP IS is installed on-siteby our own technicians and the use of appropriate machineryand paving equipment. The advantages of this process are:an optimal fit of the Regupol SP IS E-layer onto differenttypes of subbases, unique consistency allowing for verticaldrainage on dynamic subbases and good shock absorptionrating contributing to safe play.
Features and technical data:
Variable, subject to material composition and thickness.Please refer to our technical data sheets.
Artificial turf with sand or sand and rubber infill composition
Regupol SP IS
Unbound base-layer Engineered subbase
Natural ground
Regupol SP IS
Conventional typeartificial turf
Regutex LB / Regupol SP IS
Regutex LB supplied in prefabricated rolls made fromselected rubber granules and rubber fibres with a specialfabric mesh layer laminated onto one side
BSW has developed a special version of the standardRegupol SP shock pad with a special fabric mesh layerlaminated onto one side for extra dimensional stability.Regutex LB is therefore especially suitable for loose laidapplications under conventional turf systems without aninfill composition, whereby the seams between the individualrolls are taped with a special seaming tape and adhesivebefore the artificial turf is installed on top. Regutex LB is,similar to the standard Regupol SP product, available in athickness range of 8 – 14 mm.
Regupol E-layer
The in-situ type alternative to Regutex LB with the thicknessalso depending on the type of subbase and the characteristicsof the artificial turf material.
Features and technical data:
Variable, subject to material thickness and composition.Please refer to our technical data sheets.
Artificial turf
Regutex LB Regupol SP IS
Engineered subbase
Natural ground
Unbound base layer
Regutex LB Regupol SP IS
SPORTS | LEISURE
The shock absorbing system for artificial turf
Every kind of artificial turf has differentproperties and an appropriate shock padis therefore critical for the performanceof the system combination. The perfectcomplement to a well-constructed artificialturf product is a resilient, prefabricatedshock pad. The proprietary Regupol ma-
nufacturing process yields to the world’smost complete line of bonded crumbrubber roll good products. Regardless ofthe type of artificial turf, there is anappropriate Regupol pad providing themost consistent density, thickness, feeland resilience possible. This enables
BSW to guarantee uniformity in ballrebound, shock absorption and elasticityfor the lifetime of an installation. Theportfolio of Regupol shock pads is uniqueand the performance record is outstandingproven by thousands of installations inprestige sports facilities around the world.
The right solution for every kind of artificial turf
– weather resistant, does not rotten or becomebrittle or hard over time
– permanent quality control in house duringproduction and on site during installation throughour accredited quality management system
– reusable when artificial turf material must bereplaced
– uniformity in density, shock attenuation and allother physical properties
– high level of elasticity for additional cushioningcomfort
– customised force reduction rating– fast and easy installation procedure– excellent drainage characteristics
The benefits
Certified by
DIN EN ISO 9000DIN EN ISO 14001
OHSAS 18001
Regupol®
Berleburger Schaumstoffwerk GmbHP.O. Box 118057301 Bad Berleburg (Germany)Phone ++49 (0) 27 51 / 8 03-0Fax ++49 (0) 27 51 / 8 03-109eMail [email protected] www.berleburger.de
What else is in the BSW range:Regupol sports surfacesBSW provides the right surface for many sports.Our range includes a complete array of differentsurface structures and qualities. Whetherfor basketball, handball, tennis, volleyball,multi-purpose playing fields, school yardsor playing areas – the multitude of surfaces,elastic cushioned under-layers and installationsystems offers the right quality for everysport and every level of performance.
Die BSW GmbH(Berleburger Schaumstoffwerk)has been manufacturing sports surfacing andother flooring products for over 30 years andhas been servicing the sports and leisuremarket ever since. But that is not all. BSWalso offers an extensive range of technicalproducts for the construction industry. Withour advanced technology we are also a leaderin this segment. Regupol® is a registeredtrademark of BSW. Regupol® is manufactured
and promoted by BSW based in Germany andour partners, Dodge-Regupol, Inc. inPennsylvania covering the North Americanterritory and Regupol-Australia Pty.
www.berleburger.deYou can find more information about ourproducts on our website. You can also orderproduct samples on-line, see a list of referencesand contact us directly.
Berleburger Schaumstoffwerk GmbH (BSW)manufactures a large variety of flooring productsfor sports, fitness and leisure out of the materialcalled Regupol®. Regupol® is a mixture ofrubber and polyurethane. BSW processes theproduct on its production sites to special
requirements and using a number of differentformulations. Regupol products are versatile,durable and completely recyclable. Individualmanufacture to order, customer specificpackaging and warehousing provide for quicksolutions to specific application problems.
BSW
/EL/
GB
/01/
01/0
4