Multipurpose 160/225/320/450kVIndustrial Radioscopic System
SRE MAX
SRE MAX 70.120 CNC• Available in three different standard sizes. Custom
sizes available on request.• Equipped with X-Ray sources from 160kV up to 450kV Mi-
cro-focus sources from 130kV up to 300kV also available.• Equipped with Digital Flat Panel Detector (different
sizes and resolution available).• New “One Click CT” simple and easy Computed Tomo-
graphy function
SRE MAX 100.200
SRE MAX 80.150 CNC
• Cabinet designed with a large double sliding door for casting loading with two lead/glass inspection windows.
• Loading door equipped with safety light curtains.• High speed door movements controlled by inverter.• Electronic safety circuits controlled by multifunction
controller (level 4 safety class compliant) with no mechanical contact switches.
• Blinking X-ray on warning lights interlaced with light fail circuit.
X-Ray shielded cabinet complies with Italian regulation (DPR 257/2001) and the strictest international regulations for fully shielded radiation devices. The cabinet is completely self-contained. Manufactured in steel with complete lead shielding.
AUTOMATIC POSITIONING (CNC)
• Brushless servo-motors with on-board CAN-BUS controller and power driver are used for axes po-sitioning; absolute encoders fitted on the motors allow for high precision positional accuracy.
• Programming is “user friendly”and intuitive by a teach-in procedure.
• X-Ray and imaging parameters, as well as moto-rized shutter positions, are saved automatically.
• Manual operations and axes positioning during the teach-in cycle are possible either using joy-stick or through touch screen display.
• No limit at the number of programs allowed, with unlimited positions each.
CONTROL CONSOLE
• Tilting adjustable ergonomic console fixed with the cabinet.
• Electrical panel and electronic boards inside the con-sole, rear easy access for maintenance operations.
• Operator push-button panel with the main fun-ctions pushbuttons and joysticks for axes move-ments, 4 user programmable function keys.
• Command, programming and diagnostic, X-Ray image, processing, X-Ray controller and user in-terface by touch screen display.
• Ethernet port is also available for connecting to a Local Area Network (LAN) and for remote dia-gnostic and service.
• USB pen drive access available.
• X-Ray tube is equipped with motorized and pro-grammable two-axes antiblooming shutter.
• 7 + 2 (shutter) independent handling axes are controlled by brushless motors fitted with abso-lute encoders. The system does not require axes home reference.
• BHT IP (image processor) integrated. Wide size 22 inches screen with touch functions.
• Console with dual Monitor, wide screen 16/9 with touch function for images comparison or ADR functions available on request.
• Inspection occurs by moving the complete X-Ray system, without any C-arm; coordination and ali-gnment between source and detector are control-led by software. This solution allows for a signi-ficant handling and positioning speed increase. According to casting position on horizontal zoom-axis, the software allows for dynamic axis tilt.
• Turntable is able to move on three axes with con-tinuous rotation on 360 degrees and is provided with tapped holes, allowing easier fixing of de-dicated supports or chuck clamps (not included).
• A mechanical magnification axis guarantees line-ar and constant magnification factors.
• Turntable comes out of the loading door, for a more convenient loading operation.
HANDLING AND MANIPULATION MECHANISM
A powerful image processor provides a large num-ber of features to help the operator in identifying,
CT as option available on all models
Various software packages are available with tools like:- Coordinate measurement- Actual/nominal comparison- Wall thickness analysis.- Enhanced porosity inclusion analysis
DDA evaluator software available for Aerospace applications
The software allows the execution of many and diffe-rent tests, in particular there are all the required testsdescribed in the following normative:- Standard PR 5250- Standard ASTM E2737
evaluating and reporting New Highly Dynamic Radio-scopy (HDR) filter on all versions with Digital Panel.
IP BHT Plus image processor with HDI functions
MAXSRE MAX 70.120 CNC
160 kV 160 kV 160 kV225 kV 225 kV 225 kV320 kV 320 kV 320 kV450 kV 450 kV 450 kV
SRE MAX 100.150 CNCSRE MAX 80.150 CNC
GENERAL/AXESInspection envelope
CT measuring cylinder (ø x H)
Inspection part weight
Turntable
Tilt angle beam
Total number of axes
Axes movements
Tube Shutter
Axes speed
ø 700 × H 1200 mm
approx. 160 × 160 mm
ø 800 × H 1500 mm
approx. 160 × 160 mm (320 × 320 mm with 16” FPD)
ø 1000 × H 1500 mm
approx. 160 × 160 mm (320 × 320 mm with 16” FPD)
80 kg
ø 400 mm
80 kg
ø 400 mm
80 kg
ø 400 mm
120 kg (opt. up to 250 kg)
ø 400 mm or 600 mm
120 kg (opt. up to 250 kg)
ø 400 mm or 600 mm
120 kg (opt. up to 250 kg)
ø 400 mm or 600 mm
± 30 - 35° ± 30 - 35°
Not standard Not standard
± 30 - 35°
7 + 2 (shutter)** CNC controlled - Driven by brushless motors
Part = X (hor.) -Z (magnification) -V (rotation 360°) X-Ray = Y (vertical) -U (tilting)
2 axes controlled shutter (diaphragm), programmable positions
up to 15 m/min up to 15 m/min up to 15 m/min
RADIATION-SHIELDEDCABINET
Self contained lead+steel,
movable by fork-lift
Self contained lead+steel,
movable by crane
Self contained lead+steel,
movable by fork-lift
Self contained lead+steel,
movable by crane
Self contained lead+steel,
movable by fork-lift
Self contained lead+steel,
movable by crane
Approx. dimensions (W×D×H)
Approx. weight
Loading door dim. W × H mm
Door type
External loading
1.700 × 1.700 × 2.200 mm 2.200 × 2.200 × 2.450 mm 2.000 × 2.000 × 2.600 mm 2.600 × 2.600 × 2.600 mm
653 × 1480 800 × 1620 1020 × 1830797 × 1624653 × 1480 800 × 1620 1020 × 1830797 × 1624
8 inches FPD Detector
IMAGING
2.400 kg. 11.000 kg. 3.800 kg.3.300 kg.2.900 kg. 16.000 kg. 4.500 kg.3.800 kg.
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
Active area
Pixel size
Frame rate (14 bit ADC)
Frame rate (16 bit ADC)
Focal spot to Detector Distance
200 × 200 mm
200 μm - 400 μm (binning mode)
15 fps / 30 fps
25 fps / 50 fps
16 inches FPD DetectorActive area
Pixel size
Frame rate (16 bit ADC)
Not available
400 × 400 mm
100 μm / 200 μm - 400 μm (binning mode)
3,75 fps - 7,5 fps / 15 fps – 30fps
400 × 400 mm
100 μm / 200 μm - 400 μm (binning mode)
3,75 fps - 7,5 fps / 15 fps – 30fps
Imaging Options
X-RAY EQUIPMENT
X-Ray tubeMXR 160 HP,
or MXR
160/20
MXR 160 HP,
or MXR
160/20
MXR 160 HP,
or MXR
160/20
MXR 225 HP
others on
request
MXR 225 HP
others on
request
MXR 225 HP
others on
request
MXR 451 HP
others on
request
MXR 451 HP
others on
request
MXR 451 HP
others on
request
MXR 320 HP
others on
request
MXR 320 HP
others on
request
MXR 320 HP
others on
request
Focal spot sizeA d=0.4/1.0 (EN12543)
0.15/0.4 (IEC 336)B d=1.0/1.0 (EN12543)
0.4/0.4 (IEC 336)
A
B
A
B
A
BA A AA A AA A A
Power 800/1800W
640/640W
800/1800W
640/640W
800/1800W
640/640W800/1800W 800/1800W 800/1800W800/1800W 800/1800W 800/1800W700/1500W 700/1500W 700/1500W
Input Power/Voltage2.3kW
230VAC 900W
230VAC
20 ÷ 160kV
20 ÷ 160kV
800/1600W
640W
800/1600W
640W
800/1600W
640W
20 ÷ 160kV
20 ÷ 160kV
20 ÷ 160kV
20 ÷ 160kV20 ÷ 225kV
800/1800W 800/1800W 800/1800W
20 ÷ 225kV 20 ÷ 225kV40 ÷ 320kV
800/1800W 800/1800W 800/1800W
40 ÷ 320kV 40 ÷ 320kV50 ÷ 450kV
700/1500W 700/1500W 700/1500W
50 ÷ 450kV 50 ÷ 450kV
2.3kW
230VAC 900W
230VAC
2.3kW
230VAC 900W
230VAC
2.6kW
230VAC
2.6kW
230VAC
2.6kW
230VAC
2.4kW
230VAC
2.4kW
230VAC
2.4kW
230VAC
2.1kW
230VAC
2.1kW
230VAC
2.1kW
230VAC
Output Voltage
Output Power
Double sliding motorized
Standard *extra stroke on request
Standard: 1000
Double sliding motorized
Standard *extra stroke on request
BHT IP Plus with HDI **Options: “Extreme” version with reference images functions “BHT DDA evaluator” for aerospace application
Standard: 1250
Double sliding motorized
Standard *extra stroke on request
Standard: 1450
HIGH VOLTAGE GENERATOR