Standardproduct range
22
33
Contents
Bars and profiles Flat bars 4 Round bars 8 Square bars 9 Profiles 9
Tubes Copper tubes for installation in buildings 10 Copper tubes for refrigeration, air conditioning and for medical gases 10 Copper tubes for industrial applications 10
Wire Wire rod – diameters and materials 11 Wire rod – products and applications 11 Wires – diameters and materials 12 Single wire 12 Multiwire 13 Stranded wire 14 Wire rope and stranded wire rope 14
Strip Copper Strip 15 Industrial strip made of copper, bronze, brass 16 Transformer strip made of copper 17 Cable winding strip made of copper 17 HF cable strip made of copper 17 Roofing strip made of copper 18 Sheets from strip made of copper 18 Preliminary strip made of copper 18
Sheets/plates/discs Piece-sheets made of copper, brass, cupronickel – cold-rolled 19 Piece-sheets made of copper, brass, cupronickel – hot-rolled 19
All of the standards mentioned in the standard product range relate to the most recent versions. August 2015
4
Bars and profiles
R200/H035
Width in mm
Thickness in mm
3 4 5 6 8 10 12 15 20 30 40 50 60
10
> 10 – 12
> 12 – 15
> 15 – 20
> 20 – 30
> 30 – 40
> 40 – 100
> 100 – 160
> 160 – 200
> 200 – 220
R230
Width in mm
Thickness in mm
3 4 5 6 8 10 12 15 20 30 40 50 60
10
> 10 – 15
> 15 – 20
> 20 – 30
> 30 – 40
> 40 – 50
> 50 – 60
> 60 – 200
> 200 – 220
Standard product range SH = sharp RD = rounded CE = semi-circular
KME supplies standard bars and profiles as defined in EN, ASTM and JIS, in Cu varieties Cu-ETP (CW004A), Cu-OF (CW008A), Cu-OFE (CW009A), Cu-PHC (CW020A) and Cu-HCP (CW021A). Other Cu varieties, dimensions and strengths are available on request. Bars and profiles can be supplied in various of lengths.
Flat barsDrawn flat bars can be supplied with SH, RD and CE edges.
5
R250/H065
Width in mm
Thickness in mm
3 4 5 6 8 10 12 15 20 30 40 50 60
10
> 10 – 12
> 12 – 15
> 15 – 20
> 20 – 30
> 30 – 40
> 40 – 100
> 100 – 160
> 160 – 200
> 200 – 220
R260
Width in mm
Thickness in mm
3 4 5 6 8 10 12 15 20 30 40 50 60
10
15
> 15 – 20
> 20 – 30
> 30 – 40
> 40 – 160
> 160 – 200
> 200 – 220
Standard product range
6
Flat bars Bars and profiles
H075
Width in mm
Thickness in mm
3 4 5 6 8 10 12 15 20 30 40 50 60
10
12 – 15
> 15 –20
> 20 – 30
> 30 – 40
> 40 – 100
> 100 – 120
> 120 – 160
> 160 – 200
> 200 – 220
H085
Width in mm
Thickness (in mm)
3 4 5 6 8 10 12 15 20 30 40 50 60
10
15
> 15 –20
> 20 – 100
> 100 – 120
> 120 – 140
R280
Width in mm
Dicke in mm
3 4 5 6 8 10 12 15 20 30 40 50 60
10
> 10 –15
> 15 –20
> 20 – 160
> 160 – 200
> 200 – 220
Standard product range
7
Flat bars Bars and profiles
Flat bars with a width of up to 200 mm can be coated electrolytically with a tin coating of between 4 and 20 μm.Pressed flat bars are available on request.
D (drawn, without defined mechanical properties)
Width in mm
Thickness in mm
3 4 5 6 8 10 12 15 20 30 40 50 60
10
12
> 12 – 15
> 15 –20
> 20 – 30
> 30 – 40
> 40 – 50
> 50 – 60
> 60 – 100
> 100 – 120
> 120 – 160
> 160 – 200
> 200 – 220
R300
Width in mm
Thickness in mm
3 4 5 6 8 10 12 15 20 30 40 50 60
10
> 10 –15
> 15 –20
> 20 – 110
> 110 – 160
> 160 – 200
> 200 – 220
Standard product range
8
Round bars
Square bars
Diameter in mm
6 8 10 15 20 30 40 50 60 70 80 90 100 110 115 120 130 140 150 160 180 200 220 230
Round bar, pressed
M (for manufactured)
Round bar, drawn
R200/H035
R230
R250/H065
R260
H075
H085
R280
R300
H100
D (drawn, without defined mechanical properties)
Edge lengths in mm
6 10 15 20 30 40 50 60 70 80 90 100 110 120
Square, pressed
M (for manufactured)
Square, drawn
R200/H035
R230
H065
R250
R260
R280/H075
H085
R300
D (drawn, without defined mechanical properties)
Standard product range
Bars and profiles
9
Profiles
KME is supplying an increasing amount of profiles, especially complex profiles to customer specific drawings.These profiles can be supplied extruded or drawn, up to a maximum cross-sectional area of 10,000 mm2.
Special profiles provide our customers with efficient, customised solutions, which also enable raw-material savings.
When we manufacture complex drawing-based profiles we rely on our years of experience and our own tool-making facilities which feature the latest erosion technology. Our technicans are very happy to help with the design of your delivery specifications.
10
Tubes
Tube description Strength Range of dimensions Version
HETCU®
R220 AD 6 – 22 mm in rings of 25/50 m
R250 AD 12 – 28 mm stretched lengths of 5 m
R290 AD 6 – 108 mm stretched lengths of 5 m
HETCU®-plusR220 AD 8 – 22 mm in rings of 25 m
R290 AD 12 – 54 mm stretched lengths of 5 m
HETCU®-therm R220 12 x 0.7 / 14 x 0.8 in rings of 50 m
Quality copper tube for installation in buildings as defined in EN 1057
Tube description Strength Range of dimensions Version
HETCOOL®R220 AD 6 – 22 mm in rings of 25/35/50 m
R290 AD 6 – 108 mm stretched lengths of 5 m
Quality copper tube for refrigeration and air conditioning compliant with EN 12735-1 and for medical gases compliant with EN 13348
Tube description Strength Range of dimensions Version
softAD 6 – 22 mm in rings of 15/25/35/50 m
AD 6 – 108 mm stretched lengths of 3 – 6 m
half-hard AD 6 – 54 mm stretched lengths of 3 – 6 m
hard AD 6 – 108 mm stretched lengths of 3 – 6 m
Wound copper tubes(LWC)
soft AD 6 – 22 mmCoil weight:
approx. 125/190/380 kghard AD 6 – 22 mm
Quality copper tube for industrial application compliant with EN 12449 / EN 12451 / EN 13600 / EN 12735-2
Other dimensions and delivery forms on request. * AD = external diameter
11
Wire rod
Diameter (in mm)
Material
Cu-ETP Cu-ETP1 CuAg0.1 Other
8 * *
9,5 * *
12,4 * *
20 *
22 *
Copper wire rod – diameters and materials
Area of use Quality Wire diameter
Redraw wire brown ≥ 1.10 mm
Medium wire green < 1.10 – 0.30 mm
Fine wire red < 0.30 – 0.13 mm
Enamelled wire grey Special applications with selective finish
Ultra-fine wire
yellow < 0.13 – 0.10 mm
yellow Z < 0.10 – 0.07 mm
white 0.10 – 0.05 mm tinned
Products and applications – diameter 8 mm
* By arrangement.Special requirements and special alloys on request.
Standard product range
12
Wire
Wires – diameters and materials as defined in EN 13602
Single wire
Other packaging and configurations on request. Further specifications and materials on request.
Packaging Diameter in mm
8 – 3 3 – 1.5 1.5 – 1 1 – 0.8 0.8 – 0.3 0.3 – 0.05
Vat
Coil
Ring
Drum Flange diameter in mm
2000
1400
1250
1000
800
630
560
450
400
315
250
200
160
Bobbin
Diameterin mm
Material
Cu-ETP Cu-ETP1 Cu-OF Cu-OF1 Cu-OFE CuSn6
8 – 7
7 – 3
3 – 1
1 – 0,3
0.3 – 0.05
Standard product range
Definition: round copper wire compliant with international regulations and guidelines as well as individual customer require-ments, bare or tinned using pure tin, soft annealed.
13
Other packaging and configurations on request. Further specifications and materials on request.
Multiwire
Packaging Diameter in mm
0.5 – 0.15 0.15 – 0.10 0.10 – 0.05
Vat
Coil
Ring
Drum Flange diameter in mm
2000
1400
1250
1000
800
630
560
450
400
315
250
200
160
Bobbin
Standard product range
Definition: round copper wire compliant with international regulations and guidelines as well as individual customer require-ments, bare or tinned using pure tin, soft annealed. Wire bundles (plying) consisting of between 5 and 24 strands, wound dyna-mically or statically depending on wire diameter.
14
WireStranded wire
Packaging Cross-section in mm2
25 – 16 16 – 10 10 – 6 6 – 2.5 2.5 – 0.5 0.5 – 0.05
Vat
Coil
Ring
Drum Flange diameter in mm
2000
1400
1250
1000
800
630
560
450
400
315
250
200
160
Bobbin
Wire rope and stranded wire rope
Packaging Cross-section in mm2
1000 – 630 630 – 400 400 – 240 240 – 120 120 – 25
Fass
Coil
Ring
Drum Flange diameter in mm
2000
1400
1250
1000
800
630
560
450
400
315
250
200
160
Bobbin
Other packaging and configurations on request. Further specifications and materials on request.Standard product range
15
Strips
Strips made of copper
Width in mm
Thickness in mm
0.06 – 0.075 > 0.075 – 0.25 > 0.25 – 0.5 > 0.5 – 0.8 > 0.8 – 1.0 > 1.5 – 6
5.0 – 15
> 15 – 60
> 60 – 100
> 100 – 380
> 380 – 840
> 840
Reel
76
100
120
127
150
200
300
400
500
Strip width in kg/mm
0.75 – 1.5
2.5 – 3.0
5.0 – 6.0
7.5 – 8.0
10.0 – 12.0
15.0 – 16.0
Standard product range
16
Strips
Material R220 / soft R240 / half-hard R290 / hard R360 / spring-tempereddouble
spring-tempered extra-hard
Cu-ETP
Cu-OF
Cu-DLP
Cu-DHP
Cu-PHC
Cu-HCP
CuAg0,1
CuZn0,5
CuZn5
CuZn10
CuZn15
CuZn28/30
CuZn33
CuZn36/37
CuZn40
CuSn5
CuSn6
CuSn8
Industrial strip made of copper, bronze, brass
KME supplies strips in every temper in the form of deep-drawing quality to spring hard material compliant with EN 1652 and EN 1654, JIS, ASTM and others, both tempered and annealed to specific grain sizes.
We are open to discuss deviations from standard tempers with you. Our edges are cut with the minimum burr edge, re-rolled burr-free, or offered rounded with a non-defined edge radius. The geometry of our strips also complies with the aforementioned European standards. Computerised surface inspection units are used to test our material for surface defects.
Other materials on request.Standard product range
17
Transformer strip made of copper
Cable winding strip made of copper
StripsCu-ETP (R220 + R240); Cu-OF
Cu-ETP (R220 + R240); Cu-OF; width 10 – 60 mm, thickness 0.075 – 0.3 mm
low-burr cut rounded (non-defined edge radius)
Widthin mm
Thickness in mm
0.10 – 0.29 > 0.29 – 0.5 > 0.5 – 1.5 > 1.5 – 2.5 > 2.5 – 3.0
10 – 30
> 30 – 250
> 250 – 840
> 840 – 1200
Ring diameter Diameter in mm
Internal coil diameter (ID) 70 76 100 120 127 150 / 152 200 300
max. outside coil diameter (OD) 450 450 640 640 640 640 780 1070
HF cable strip made of copperCu-PHC; Cu-OF; Cu-DLP; width 30 – 200 mm; thickness 0.15 – 0.4 mm; lengths max. 6500 mm
Every mastercoil is examined for periodical thickness fluctuations by means of FFT analysis.
Ring diameter Diameter in mm
Internal coil diameter (ID) 300 400
max. outside coil diameter (OD) 1070 1300
18
Preliminary strip made of copper
Roofing strip made of copper strips Strips
Cu-OF; Cu-ETP; Cu-DLP; Cu-DHP; Cu-PHC; Cu-HCP
Cu-DHP (R220 / R240 / R290); width 200 – 1250 mm, thickness 0.5 – 1 mm
Special edition: 30 m coils available with internal ring diameter of 300 mm and width between 200 and 1000 mm.
Cast strip, milledWidth 1260 mm +/– 10 mm 1080 mm +/– 10 mm on requestThickness 14 mm +/– 1 mm
Sheets from strip made from copper and copper alloysCu-OF; Cu-ETP; Cu-DHP; CuZn30; CuZn37; CuZn40
Widthin mm
Thickness in mm
0.10 – 0.50 > 0.5 – 6
> 300 – 840
> 840 – 1200
Widthin mm
Thickness in mm
> 0.3 – 0.5 > 0.5 – 2.0 > 2.0 – 4.0 > 4.0 – 10.0
300 – 500
> 500 – 840
> 840 – 1000
> 1000
Ring diameterin mm
Width in mm
200 – 500 > 500 – 1250
Internal coil diameter (ID) 400 / 500 / 600 400 / 500 / 600
max. outside coil diameter (OD) 1100 1250
Standard product range
19
Single or individual sheets made of copper, brass, cupronickel – cold-rolled
Single or individual sheets made of copper, brass, cupronickel – hot-rolled
Single or individual sheets made of bronze and other copper alloys max. 1000 mm width, other dimensions on request.
* On request.
Piece-sheets made of other alloys on request. Discs, segments and partially made parts on request.
Other lengths on request.Single or individual sheets made of bronze max. 1250 mm width, other dimensions on request.DHP-Cu up to max. 50 mm thickness.
Widthin mm
Thickness in mm
3 – 4.8 > 4.8 – 6.5 > 6.5 – 8 > 8 – 10 > 10 – 12 > 12 – 35
30 – 670 max.4000 mm longmax.
4000 mm longmax.
3100 mm longmax.
3100 mm longmax.
2500 mm longmax.
6200 mm long
> 670 – 1000 max.4000 mm longmax.
4000 mm longmax.
3100 mm longmax.
3100 mm longmax.
2500 mm long
> 1000 – 1250 max.4000 mm longmax.
3000 mm longmax.
3100 mm long * *
> 1250 – 1600 max.4000 mm longmax.
3000 mm long
Widthin mm
Thickness in mm
3 – 5 > 5 – 12 > 12 – 20 > 20 – 60 > 60 – 200 > 200
30 – 1000 max.6000 mm longmax.
8000 mm longmax.
4000 mm longmax.
6200 mm longmax.
4000 mm long *
> 1000 – 2500 max.6000 mm longmax.
8000 mm longmax.
4000 mm longmax.
6200 mm long * *
> 2500 – 3000 * max.4000 mm longmax.
4000 mm long
> 3000 – 3200 * max.4000 mm long
> 3200 * *
Sheets/plates/discs
Standard product range
We can manufacture any of our products in compliance with the relevant DIN standards, internationally established standards and custom requirements. All of our packaging is appropriate to the products it contains.
Product areas
SB- S
tand
ard
prod
uct r
ange
-EN
-10-
15
STRIP KME supplies preliminary strip, industrial strip, transformer strip, cable and HF cable strip and roof-ing strip. We manufacture all of our strip products using our Conti-M® technology which we devel-oped inhouse, using continous casting technology to achieve a uninterrupted 24/7 process.
TUBES KME supplies tubes of different lengths, diameters and thicknesses. Our HETCU® (installa-tion tubing) and HETCOOL® (refrigeration, air conditioning and medical technology) product families are extremely well established in the market. Consistent quality management from our own continuous casting plant, right through to the tube drawing process guarantees seamless tubing with outstanding quality.
WIRE KME supplies the entire spectrum of wire rod, from thick, medium and fine wire to stranded wire and wire rope. Our fully integrated Contirod® technology allows us to offer copper wire products and alloy wire products (plain and tinned) with a wide range of finishes.
BARSKME is one of Europe’s leading producers of copper bars and profiles. Our production range en-compasses a wide range of sizes in various grades of copper. We also produce customised profiles based on technical drawings.
SHEETS, PLATES AND DISCSKME offers sheets, plates and discs in a wide range of dimensions. Our rolling mill is supplied by our own foundries. Our strengths lie in a rich range of more than fift y alloys. We can also produce plates and discs to customer specific drawings on request.
CUSTOM SOLUTIONSKME develops solutions tailored entirely to its customers’ requirements. With the technical means and many years of experience, we regularly find unconventional solutions.