7/23/2019 Steps to model a clutch housing on solid edge
1/38
1
Lab Report of Machine Design
Submitted by:
1- Muhammad Abdullah
2012-M-!"2- #ralhad $upta
2012-M-%&
Submitted to:
Sir 'asimDepartment of Mechanical ngineering ()et Lahore
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
2/38
2
ontents of 'eport(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
3/38
Part1 Part2
Part3 Part4
Part5 Part6
Assembling
3
lut!h "ousing 'eportAssignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
4/38
)
*n this report +e modeled our housing by ma,ing
parts then assembling into a single part by
Assembly. *n eery part the steps are gien +hat
+e did in this step.
#art-1 Mounting(
/tep1(
*n this step +e did simple reoled protrusion.
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
5/38
%
/tep2(
*n this step +e did !utout.
/tep3(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
6/38
7/23/2019 Steps to model a clutch housing on solid edge
7/38
7
/tep(
*n this step +e made a solid !ylinder by simple
protrusion !ommand and then pattern it along the
!entral !ir!le.
/tep7(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
8/38
*n this step +e did !utout and pattern.
/tep(*n this step +e did !utout and made a !ylinder then
pattern it.
/tep&(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
9/38
&
*n this step +e made a solid !ylinder by protrusion
!ommand.
/tep10(
*n this step +e did !utout.
/tep11(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
10/38
10
*n this step +e made a re!tangular bar by simple
protrusion then +e did pattern along the !entral
!ir!le.
/tep12(
*n this step +e did rounding of edges and out part
is !omplete.
#art 2 /mall "eli!al gear(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
11/38
11
/tep1(
*n this step +e made a simple !ylinder by
protrusion.
/tep2(
*n this step +e did simple !utout.
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
12/38
12
/tep3(
*n this step +e made ,ey+ays by simple !utout
and then +e made t+o s,et!hes as sho+n.
/tep)(
*n this step +e made a teeth of heli!al gear by
using lofted protrusion !ommand then pattern it
along the !ir!umferen!e.
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
13/38
13
/tep%(
*n this step +e did !hamfer.
#art 3 /pur gear(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
14/38
1)
/tep1(
*n this step +e made a !ylinder by simple
protrusion.
/tep2(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
15/38
1%
*n this step +e made a gear teeth by simple
protrusion.
/tep3
*n this step +e did pattern of the tooth.
/tep)(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
16/38
1
*n this step +e did !utout.
/tep%(
*n this step +e did !utout and !hamfer.
#art ) "older(Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
17/38
17
/tep1(
*n this step +e did reole protrusion.
/tep2(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
18/38
1
*n this step +e made a !ylinder by simple
protrusion.
/tep3(
*n this step +e made a re!tangular bar on the
periphery of the last !ylinder and pattern it along
the !ylinder.
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
19/38
1&
/tep)(
*n this step +e did protrusion and !utouts and
pattern. e rst made !ylinder by protrusion then
then +e did !utout then +e did pattern then +e
ma,e a re!tangular bar and pattern it.
/tep%(
*n this +e made protrusion and pattern it.
/tep(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
20/38
20
*n this +e made a !utout and +e build a !ylinder
by protrusion and then +e pattern it.
/tep7(
*n this step +e did rounding of edges.
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
21/38
21
#art % /!re+(
/tep1(
*n this step +e made a !ylinder by simple
protrusion.
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
22/38
22
/tep2(
*n this step +e made the head by simple
protrusion.
/tep3(
*n this step +e did heli!al !utout.
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
23/38
23
/tep)(
*n this step +e did t+o !utouts.
/tep%(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
24/38
2)
*n this step +e did rounding of edges.
#art Main lut!hhousing(
/tep1(
*n this step +e made a solid !ylinder by simple
protrusion.
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
25/38
2%
/tep2(
*n this step +e did simple !utout reole !utout
and pattern.
/tep3(
*n this step +e did protrusions and !utouts.
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
26/38
2
/tep)(
*n this step +e did simple !utout and reoled
!utout.
/tep%(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
27/38
27
*n this step +e did simple protrusion and pattern.
/tep(
*n this step +e ma,e a heli!al gear by lofted
protrusion.
/tep7(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
28/38
2
*n this step +e did heli!al !utout and simple !utout
and drafted it.
/tep(
*n this step +e did !utout drafting pattern and
rounding the edges.
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
29/38
2&
Assembly of the parts
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
30/38
30
e did assembly of the parts +ith the steps in
!oming pages(
/tep1(
e inserted the lut!h main housing +hi!h +as
our part .
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
31/38
31
/tep2(
*n this step +e inserted spur gear part3 and
aligned it to our preious inserted lut!h main
housing.
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
32/38
7/23/2019 Steps to model a clutch housing on solid edge
33/38
7/23/2019 Steps to model a clutch housing on solid edge
34/38
3)
/tep)(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
35/38
3%
*n this step +e inserted its upper part +hi!h is
part) and aligned it.
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
36/38
3
/tep%(
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
37/38
37
*n this step +e inserted and aligned the s!re+s
part% a5ially.
Assignment of Md Lab nal report Made by M.Abdullah 2012-ME-37lut!h "ousing #ralhad $upta 2012-ME-%&
7/23/2019 Steps to model a clutch housing on solid edge
38/38
3
/tep(
*n this step +e inserted the heli!al gear part2 and
+e didn6t aligned it +e ust positioned it be!ause
for the motor !ommand to +or,.