Note:
1/. For detailed dimensions of thepumps, refer to separate dimensiondata sheets.
2/. The companion flange suppliedwith the pump are used with theQDC.
3/. The weight in dimension tablesrefers only to the weight of theQDC.
4/. Standard accessories suppliedwith QDC include:-
-Connector body with foundation bolts -Guide rail support -Adaptor Flange
Guide rail is not supplied.
Submersible Effluent / Waste Pump
EBARA Pumps Malaysia Sdn Bhd6, Jalan TP3, UEP Subang Jaya Industrial Park,47620 Subang Jaya, Selangor, Malaysia.Tel : 03-8023 6622 Fax : 03-8023 9355Email : [email protected] Website : www.ebara.com.my
EPM DVS 0513
DIMENSION WITH QDC
Applicable Models - 50 DVSPUMP
APPLICATIONS
DIMENSION WITH QDC
FEATURES/BENEFITS
Submersible Effluent / Waste PumpType DVS
* All specifications are subject to change without prior notice.* Dimensional details are provided for reference only.
Submersible Effluent / Waste Pump DVS DVS
• Ideal for waste water application containing soft or fibrous solids • Industrial waste water drainage• Septic effluent• Other drainage operation
Units: mm unless otherwise specified
Pump Model A DA1 DE DF DG L1 L6 QDC QDC
WeightkgModel
DA DE DF DG DT DN DD65 140 175 116 18 4 1580 150 185 126 18 8 15
Units: mm unless otherwise specified
Applicable Models - 65 & 80 DVSNote:
1/. For detailed dimensions of thepumps, refer to separate dimensiondata sheets.
2/. The discharge bend andcompanion flange supplied with thepump are used with the QDC.
3/. The weight in dimension tablesrefers only to the weight of theQDC.
4/. Standard accessories suppliedwith QDC include:-
-Connector body with foundation bolts. -Guide pipe support -Sliding Glide -Adaptor Flange
Guide pipe is not supplied.
QDCModelPump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 D1 E1
QDCWeight
kg
Authorised dealer:
65 DVS 5.75T 363 75 95 120 160 250 145 190 240 125 72 75 95 12 140 LM65 14
65 DVS 51.5 363 75 95 120 160 250 145 190 240 125 72 75 95 12 140 LM65 14
65 DVS 52.2 394 75 95 120 160 250 145 190 240 155 49 75 95 12 140 LM65 14
65 DVS 53.7 394 75 95 120 160 250 145 190 240 155 49 75 95 12 140 LM65 14
80 DVS 5.75T 363 75 95 120 170 255 145 190 240 125 72 75 95 12 140 LM65 14
80 DVS 51.5 363 75 95 120 170 255 145 190 240 125 72 75 95 12 140 LM65 14
80 DVS 52.2 394 75 95 120 170 255 145 190 240 155 49 75 95 12 140 LM65 14
80 DVS 53.7 394 75 95 120 170 255 145 190 240 155 49 75 95 12 140 LM65 14
50 DVS 5.4S 311 50 96 114 76 105 58 LS50 9
50 DVS 5.75S 321 50 96 114 76 105 58 LS50 9
50 DVS 5.4T 311 50 96 114 76 105 58 LS50 9
50 DVS 5.75T 321 50 96 114 76 105 58 LS50 9
50 DVS 51.5 321 50 96 114 76 105 58 LS50 9
• Air filled, Class F insulated, heavy duty motor, dissipates heat easily, operates cooler with higher efficiencies; longer service life with lower operating costs.• Built-in motor protection with autocut, protects motor against overheating, single phasing, and no load; saves money on costly motor replacement.• Molded cable prevents capillary action; reduces maintenance costs.• Large solids handling capabilities prevents clogging.• Semi-open vortex type recessed impeller; vortex action prevents clogging and handles stringy material better, high reliability, and lowers maintenance costs.• High quality stainless steel shaft; provides high tensile strength, corrosion resistance, longer life, and lower maintenance costs.• Double mechanical seals-silicon carbide lower seals, carbon/ceramic upper - hard faced upper and lower seals operate in an oil bath; providing longer service life and lower maintenance costs.• Available for Q.D.C connection installations provides ease of maintenance for sump type installations.
Submersible Effluent / Waste Pump DVSSubmersible Effluent / Waste Pump DVSSubmersible Effluent / Waste Pump DVS
PERFORMANCE CHART DIMENSION
SECTIONAL VIEW
SPECIFICATIONS
10.01 0.02 0.03 0.05 0.1 0.30.2 0.5 1.0
2
3
4
56789
Tota
l hea
d : m
Capacity : m3/min
10
15
20
30
DVS
DVSJ* 50 DVSA 51.5
DVS 5.75
DVSJ* 50 DVSA 5.75S
DVS 5.4
DVSJ* 50 DVSA 5.4S DVS
DVSJ* 65 DVSA5.75 80
DVS
DVSJ* 65 DVSA51.5 80
DVSDVSJ
* 65 DVSA53.7
80
DVSDVSJ* 65 DVSA52.2
80
Note:DVSH models for hot water are limited to asterisk* marked, 3 phase pumps only.
Phase S: Single
No mark: Three
Motor output: kW
Frequency 50Hz: 5
Model DVS : Manual type DVSA : Automatic type DVSJ : Parallel Automatic Device typeSize: mm
50 DVS 5 .25 T
Model Code
The DVS model pump has a unique semi-vortex construction of EBARA’s own design. This pump is as efficient as a conventional non-clog pump which uses the centrifugal force of eddy “A” (see below) to pump liquids. As you can see, any foreign matter sucked into the pump must pass the impeller, which can result in trouble caused by clinging grass and clogged stones.
With the vortex pump, foreign matter is expelled by the force of eddy “B” which is formed in the wide space between the impeller and the suction cover (“C”). There is less likelihood of clogging.
Pump Type of liquid River water, effluentLiquid Temperature 0°C ~ 40°C for DVS, DVSA; 0°C ~ 32°C for DVSJHandled Pump size : Max solids size 50 : 32mm, 65 (80) : 45mm or 56mm.Maximum Submergence 4m (0.4 ~ 1.5kW) ; 8m (2.2, 3.7kW)Minimum Submergence Refer to water level (L.W.L) in dimensions. It is possible to operate at low water level for 30min.
Synchronous Speed 3000min-1 Mechanical seal Double mechanical sealConstruction Impeller Semi-Vortex
gniraeB Prelubricated bearing gnisaC Cast iron rellepmI Cast iron
Shaft 403 Stainless steelMaterial Mechanical Impeller side Silicon carbide seal Motor side Ceramic / Carbon
gnikcaP NBR Motor
Type 2 pole, air-filled watertight
Insulation Class FProtection Built-in thermal protector
AccessoriesStandard Submersible cable : 0.4 ~ 1.5kW x 6m, 2.2 ~ 3.7kW x 10m
Float switch (for DVSA, DVSJ)
Optional Quick discharge connector, leakage detector.
EBARA semi - vortex pump Conventional non - clog pump
Note:
1/. L.W.L (Low Water Level) Is limited to 10 minutes operation at low water level.
2/. Is limited to 30 minutes operation with water level below top of motor.
Discharge Flange Dimensions(JIS 10kgf/cm)
DA DE DF DG DT DN DD65 140 175 116 18 4 1580 150 185 126 18 8 15
Size Model Fig. PhaseOutputKW DA A B C D E F H DE J L1 CL Weight
50
65
80
50 DVS 5.4S50 DVS 5.4T50 DVS 5.75S50 DVS 5.75T50 DVS 51.565 DVS 5.75T65 DVS 51.565 DVS 52.265 DVS 53.780 DVS 5.75T80 DVS 51.580 DVS 52.280 DVS 53.7
1111122222222
0.40.40.750.751.50.751.52.23.70.751.52.23.7
1313333333333
PT2”PT2”PT2”PT2”PT2”6565656580808080
160160171171171195195227227195195227227
239239249249249396396427427411411442442
148148163163163298298313313313313328328
919186868698981141149898114114
8282828282178178201201183183206206
435398497397439467519643643467519643643
9696969696--------
105105105105105125125155155125125155155
-----
145145160160145145160160
6 m6 m6 m6 m6 m6 m6 m10m10m6 m6 m10m10m
18 kg17 kg26 kg19 kg27 kg25 kg34 kg50 kg59 kg26 kg35 kg51 kg60 kg
Units: mm unless otherwise specified
110110125125125210210225225220220235235
Cast Iron001 Casing 1 EN-GHJL-200-EN 1561 Cast Iron016 Mechanical Seal Cover 1 EN-GHJL-200-EN 1561 Cast Iron021 Impeller 1 EN-GHJL-200-EN 1561048 Impeller Nut EN 1.4301 (AISI304) 1111 Mechanical Seal - 1 Cast Iron174 Discharge Bend 1 EN-GHJL-200-EN 1561 NBR/EN 1.4301193 Oil Plug 1 (AISI304)801 Rotor Silicon Steel Sheet 1802 Stator Silicon Steel Sheet 1811 Cable Silicon Steel Sheet 1
POS PART NAME MATERIAL N° FORUNIT
Cast Iron 814 Motor Frame 1 EN-GHJL-200-EN 1561 Cast Iron 816 Power Side Bracket 1 EN-GHJL-200-EN 1561 830 Shaft EN-GHJL-200-EN 1561 1 Cast Iron 842 Motor Cover 1 EN-GHJL-200-EN 1561 849-1 Ball Bearing 1849-2 Ball Bearing 1
876 Protector 1904 Lifting Hanger Stainless Steel 1908 Spacer Steel
POS PART NAME MATERIAL N° FORUNIT
Note:
1/. L.W.L (Low Water Level) Is limited to 10 minutes operation at low water level.
2/. Is limited to 30 minutes operation with water level below top of motor.
Discharge Flange Dimensions(JIS 10kgf/cm)
DA DE DF DG DT DN DD65 140 175 116 18 4 1580 150 185 126 18 8 15
Submersible Effluent / Waste Pump DVSSubmersible Effluent / Waste Pump DVS
PERFORMANCE CHART DIMENSION
SECTIONAL VIEW
SPECIFICATIONS
10.01 0.02 0.03 0.05 0.1 0.30.2 0.5 1.0
2
3
4
56789
Tota
l hea
d : m
Capacity : m3/min
10
15
20
30
DVS
DVSJ* 50 DVSA 51.5
DVS 5.75
DVSJ* 50 DVSA 5.75S
DVS 5.4
DVSJ* 50 DVSA 5.4S DVS
DVSJ* 65 DVSA5.75 80
DVS
DVSJ* 65 DVSA51.5 80
DVSDVSJ
* 65 DVSA53.7
80
DVSDVSJ* 65 DVSA52.2
80
Note:DVSH models for hot water are limited to asterisk* marked, 3 phase pumps only.
Phase S: SingleNo mark: Three
Motor output: kW
Frequency 50Hz: 5
Model DVS : Manual type DVSA : Automatic type DVSJ : Parallel Automatic Device typeSize: mm
50 DVS 5 .25 T
Model Code
The DVS pump has a unique semi-vortex construction of EBARA’s own design. This pump is as efficient as conventional non-clog pump which uses the centrifugal force of eddy “A” (see below) to pump liquids. As you can see, any foreign matter sucked into the pump must pass the impeller, which can result in trouble caused by clinging grass and clogged stones.
With the vortex pump, foreign matter is expelled by the force of eddy “B” which is formed in the wide space between the impeller and the suction cover (“C”). There is less likelihood of clogging.
Pump Type of liquid River water, effluentLiquid Temperature 0°C ~ 40°C for DVS, DVSA; 0°C ~ 32°C for DVSJHandled Pump size : Max solids size 50 : 32mm, 65 (80) : 45mm or 56mm.Maximum Submergence 4m (0.4 ~ 1.5kW) ; 8m (2.2, 3.7kW)Minimum Submergence Refer to water level (L.W.L) in dimensions. It is possible to operate at low water level for 30min.
Synchronous Speed 3000min-1 Mechanical seal Double mechanical sealConstruction Impeller Semi-Vortex
gniraeB Prelubricated bearing gnisaC Cast iron rellepmI Cast iron
Shaft 403 Stainless steelMaterial Mechanical Impeller side Silicon carbide seal Motor side Ceramic / Carbon
gnikcaP NBR Motor
Type 2 pole, air-filled watertight
Insulation Class FProtection Built-in thermal protector
AccessoriesStandard Submersible cable : 0.4 ~ 1.5kW x 6m, 2.2 ~ 3.7kW x 10m
Float switch (for DVSA, DVSJ)
Optional Quick discharge connector, leakage detector.
EBARA semi - vortex pump Conventional non - clog pump
Size Model Fig. PhaseOutputKW DA A B C D E F H DE J L1
50
65
80
50 DVS 5.4S
50 DVS 5.4T
50 DVS 5.75S
50 DVS 5.75T
50 DVS 51.5
65 DVS 5.75T
65 DVS 51.5
65 DVS 52.2
65 DVS 53.7
80 DVS 5.75T
80 DVS 51.5
80 DVS 52.2
80 DVS 53.7
1
1
1
1
1
2
2
2
2
2
2
2
2
0.4
0.4
0.75
0.75
1.5
0.75
1.5
2.2
3.7
0.75
1.5
2.2
3.7
1
3
1
3
3
3
3
3
3
3
3
3
3
PT2”
PT2”
PT2”
PT2”
PT2”
65
65
65
65
80
80
80
80
160
160
171
171
171
195
195
227
227
195
195
227
227
239
239
249
249
249
396
396
427
427
411
411
442
442
148
148
163
163
163
298
298
313
313
313
313
328
328
91
91
86
86
86
98
98
114
114
98
98
114
114
82
82
82
82
82
178
178
201
201
183
183
206
206
435
398
497
397
439
467
519
643
643
467
519
643
643
96
96
96
96
96
-
-
-
-
-
-
-
-
105
105
105
105
105
125
125
155
155
125
125
155
155
-
-
-
-
-
145
145
160
160
145
145
160
160
6
6
6
6
6
6
6
10
10
6
6
10
10
18
17
26
19
27
25
34
50
59
26
35
51
60Units: mm unless otherwise specified
110
110
125
125
125
210
210
225
225
220
220
235
235
Cast Iron001 Casing 1 EN-GHJL-200-EN 1561 Cast Iron016 Mechanical Seal Cover 1 EN-GHJL-200-EN 1561 Cast Iron021 Impeller 1 EN-GHJL-200-EN 1561048 Impeller Nut EN 1.4301 (AISI304) 1111 Mechanical Seal - 1 Cast Iron174 Discharge Bend 1 EN-GHJL-200-EN 1561 NBR/EN 1.4301193 Oil Plug 1 (AISI304)801 Rotor Silicon Steel Sheet 1802 Stator Silicon Steel Sheet 1811 Cable Submersible type 1
POS PART NAME MATERIAL N° FORUNIT
Cast Iron 814 Motor Frame 1 EN-GHJL-200-EN 1561 Cast Iron 816 Power Side Bracket 1 EN-GHJL-200-EN 1561
830 Shaft EN-GHJL-200-EN 1561 1
Cast Iron 842 Motor Cover 1 EN-GHJL-200-EN 1561
849-1 Ball Bearing 1
849-2 Ball Bearing 1
876 Protector 1
904 Lifting Hanger Stainless Steel 1
908 Spacer Steel
POS PART NAME MATERIAL N° FORUNIT
Submersible Effluent / Waste Pump DVS
CL Weight (m) kg
Impeller of DVS
Note:
1/. L.W.L (Low Water Level) Is limited to 10 minutes operation at low water level.
2/. Is limited to 30 minutes operation with water level below top of motor.
Discharge Flange Dimensions(JIS 10kgf/cm)
DA DE DF DG DT DN DD65 140 175 116 18 4 1580 150 185 126 18 8 15
Submersible Effluent / Waste Pump DVSSubmersible Effluent / Waste Pump DVS
PERFORMANCE CHART DIMENSION
SECTIONAL VIEW
SPECIFICATIONS
10.01 0.02 0.03 0.05 0.1 0.30.2 0.5 1.0
2
3
4
56789
Tota
l hea
d : m
Capacity : m3/min
10
15
20
30
DVS
DVSJ* 50 DVSA 51.5
DVS 5.75
DVSJ* 50 DVSA 5.75S
DVS 5.4
DVSJ* 50 DVSA 5.4S DVS
DVSJ* 65 DVSA5.75 80
DVS
DVSJ* 65 DVSA51.5 80
DVSDVSJ
* 65 DVSA53.7
80
DVSDVSJ* 65 DVSA52.2
80
Note:DVSH models for hot water are limited to asterisk* marked, 3 phase pumps only.
Phase S: SingleNo mark: Three
Motor output: kW
Frequency 50Hz: 5
Model DVS : Manual type DVSA : Automatic type DVSJ : Parallel Automatic Device typeSize: mm
50 DVS 5 .25 T
Model Code
The DVS pump has a unique semi-vortex construction of EBARA’s own design. This pump is as efficient as conventional non-clog pump which uses the centrifugal force of eddy “A” (see below) to pump liquids. As you can see, any foreign matter sucked into the pump must pass the impeller, which can result in trouble caused by clinging grass and clogged stones.
With the vortex pump, foreign matter is expelled by the force of eddy “B” which is formed in the wide space between the impeller and the suction cover (“C”). There is less likelihood of clogging.
Pump Type of liquid River water, effluentLiquid Temperature 0°C ~ 40°C for DVS, DVSA; 0°C ~ 32°C for DVSJHandled Pump size : Max solids size 50 : 32mm, 65 (80) : 45mm or 56mm.Maximum Submergence 4m (0.4 ~ 1.5kW) ; 8m (2.2, 3.7kW)Minimum Submergence Refer to water level (L.W.L) in dimensions. It is possible to operate at low water level for 30min.
Synchronous Speed 3000min-1 Mechanical seal Double mechanical sealConstruction Impeller Semi-Vortex
gniraeB Prelubricated bearing gnisaC Cast iron rellepmI Cast iron
Shaft 403 Stainless steelMaterial Mechanical Impeller side Silicon carbide seal Motor side Ceramic / Carbon
gnikcaP NBR Motor
Type 2 pole, air-filled watertight
Insulation Class FProtection Built-in thermal protector
AccessoriesStandard Submersible cable : 0.4 ~ 1.5kW x 6m, 2.2 ~ 3.7kW x 10m
Float switch (for DVSA, DVSJ)
Optional Quick discharge connector, leakage detector.
EBARA semi - vortex pump Conventional non - clog pump
Size Model Fig. PhaseOutputKW DA A B C D E F H DE J L1
50
65
80
50 DVS 5.4S
50 DVS 5.4T
50 DVS 5.75S
50 DVS 5.75T
50 DVS 51.5
65 DVS 5.75T
65 DVS 51.5
65 DVS 52.2
65 DVS 53.7
80 DVS 5.75T
80 DVS 51.5
80 DVS 52.2
80 DVS 53.7
1
1
1
1
1
2
2
2
2
2
2
2
2
0.4
0.4
0.75
0.75
1.5
0.75
1.5
2.2
3.7
0.75
1.5
2.2
3.7
1
3
1
3
3
3
3
3
3
3
3
3
3
PT2”
PT2”
PT2”
PT2”
PT2”
65
65
65
65
80
80
80
80
160
160
171
171
171
195
195
227
227
195
195
227
227
239
239
249
249
249
396
396
427
427
411
411
442
442
148
148
163
163
163
298
298
313
313
313
313
328
328
91
91
86
86
86
98
98
114
114
98
98
114
114
82
82
82
82
82
178
178
201
201
183
183
206
206
435
398
497
397
439
467
519
643
643
467
519
643
643
96
96
96
96
96
-
-
-
-
-
-
-
-
105
105
105
105
105
125
125
155
155
125
125
155
155
-
-
-
-
-
145
145
160
160
145
145
160
160
6
6
6
6
6
6
6
10
10
6
6
10
10
18
17
26
19
27
25
34
50
59
26
35
51
60Units: mm unless otherwise specified
110
110
125
125
125
210
210
225
225
220
220
235
235
Cast Iron001 Casing 1 EN-GHJL-200-EN 1561 Cast Iron016 Mechanical Seal Cover 1 EN-GHJL-200-EN 1561 Cast Iron021 Impeller 1 EN-GHJL-200-EN 1561048 Impeller Nut EN 1.4301 (AISI304) 1111 Mechanical Seal - 1 Cast Iron174 Discharge Bend 1 EN-GHJL-200-EN 1561 NBR/EN 1.4301193 Oil Plug 1 (AISI304)801 Rotor Silicon Steel Sheet 1802 Stator Silicon Steel Sheet 1811 Cable Submersible type 1
POS PART NAME MATERIAL N° FORUNIT
Cast Iron 814 Motor Frame 1 EN-GHJL-200-EN 1561 Cast Iron 816 Power Side Bracket 1 EN-GHJL-200-EN 1561
830 Shaft EN-GHJL-200-EN 1561 1
Cast Iron 842 Motor Cover 1 EN-GHJL-200-EN 1561
849-1 Ball Bearing 1
849-2 Ball Bearing 1
876 Protector 1
904 Lifting Hanger Stainless Steel 1
908 Spacer Steel
POS PART NAME MATERIAL N° FORUNIT
Submersible Effluent / Waste Pump DVS
CL Weight (m) kg
Note:
1/. For detailed dimensions of thepumps, refer to separate dimensiondata sheets.
2/. The companion flange suppliedwith the pump are used with theQDC.
3/. The weight in dimension tablesrefers only to the weight of theQDC.
4/. Standard accessories suppliedwith QDC include:-
-Connector body with foundation bolts -Guide rail support -Adaptor Flange
Guide rail is not supplied.
Submersible Effluent / Waste Pump
EBARA Pumps Malaysia Sdn Bhd6, Jalan TP3, UEP Subang Jaya Industrial Park,47620 Subang Jaya, Selangor, Malaysia.Tel : 03-8023 6622 Fax : 03-8023 9355Email : [email protected] Website : www.ebara.com.my
EPM DVS 0413
DIMENSION WITH QDC
Applicable Models - 50 DVSPUMP
APPLICATIONS
DIMENSION WITH QDC
FEATURES/BENEFITS
Submersible Effluent / Waste PumpType DVS
* All specifications are subject to change without prior notice.* Dimensional details are provided for reference only.
Submersible Effluent / Waste Pump DVS DVS
• Air filled, Class F insulated, heavy duty motor, dissipates heat easily, operates cooler with higher efficiencies; longer service life with lower operating costs.• Built-in motor protection with autocut, protects motor against overheating, single phasing, and no load; saves money on costly motor replacement.• Molded cable prevents capillary action; reduces maintenance costs.• Large solids handling capabilities prevents clogging.• Open semi-vortex type recessed impeller; vortex action prevents clogging and handles stringy material better then moving pump age through impeller vanes; provides durability, high reliability, and lowers maintenance costs.• High quality stainless steel shaft; provides high tensile strength, corrosion resistance, longer life, and lower maintenance costs• Double mechanical seals-silicon carbide lower seals, carbon/ceramic upper - hard faced upper and lower seals operate in an oil bath; providing longer service life and lower maintenance costs.• Available for Q.D.C Connection, provides ease of maintenance for sump installations.
• Ideal for waste water application containing soft or fibrous solids • Industrial waste water drainage• Septic effluent• Other drainage operation
Units: mm unless otherwise specified
Pump Model A DA1 DE DF DG L1 L6 QDC QDC
WeightkgModel
DA DE DF DG DT DN DD65 140 175 116 18 4 1580 150 185 126 18 8 15
Units: mm unless otherwise specified
Applicable Models - 65 & 80 DVSNote:
1/. For detailed dimensions of thepumps, refer to separate dimensiondata sheets.
2/. The discharge bend andcompanion flange supplied with thepump are used with the QDC.
3/. The weight in dimension tablesrefers only to the weight of theQDC.
4/. Standard accessories suppliedwith QDC include:-
-Connector body with foundation bolts. -Guide pipe support -Sliding Glide -Adaptor Flange
Guide pipe is not supplied.
QDCModelPump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 D1 E1
QDCWeight
kg
Authorised dealer:
65 DVS 5.75T 363 75 95 120 160 250 145 190 240 125 72 75 95 12 140 LM65 14
65 DVS 51.5 363 75 95 120 160 250 145 190 240 125 72 75 95 12 140 LM65 14
65 DVS 52.2 394 75 95 120 160 250 145 190 240 155 49 75 95 12 140 LM65 14
65 DVS 53.7 394 75 95 120 160 250 145 190 240 155 49 75 95 12 140 LM65 14
80 DVS 5.75T 363 75 95 120 170 255 145 190 240 125 72 75 95 12 140 LM65 14
80 DVS 51.5 363 75 95 120 170 255 145 190 240 125 72 75 95 12 140 LM65 14
80 DVS 52.2 394 75 95 120 170 255 145 190 240 155 49 75 95 12 140 LM65 14
80 DVS 53.7 394 75 95 120 170 255 145 190 240 155 49 75 95 12 140 LM65 14
50 DVS 5.4S 311 50 96 114 76 105 58 LS50 9
50 DVS 5.75S 321 50 96 114 76 105 58 LS50 9
50 DVS 5.4T 311 50 96 114 76 105 58 LS50 9
50 DVS 5.75T 321 50 96 114 76 105 58 LS50 9
50 DVS 51.5 321 50 96 114 76 105 58 LS50 9
Note:
1/. For detailed dimensions of thepumps, refer to separate dimensiondata sheets.
2/. The companion flange suppliedwith the pump are used with theQDC.
3/. The weight in dimension tablesrefers only to the weight of theQDC.
4/. Standard accessories suppliedwith QDC include:-
-Connector body with foundation bolts -Guide rail support -Adaptor Flange
Guide rail is not supplied.
Submersible Effluent / Waste Pump
EBARA Pumps Malaysia Sdn Bhd6, Jalan TP3, UEP Subang Jaya Industrial Park,47620 Subang Jaya, Selangor, Malaysia.Tel : 03-8023 6622 Fax : 03-8023 9355Email : [email protected] Website : www.ebara.com.my
EPM DVS 0513
DIMENSION WITH QDC
Applicable Models - 50 DVSPUMP
APPLICATIONS
DIMENSION WITH QDC
FEATURES/BENEFITS
Submersible Effluent / Waste PumpType DVS
* All specifications are subject to change without prior notice.* Dimensional details are provided for reference only.
Submersible Effluent / Waste Pump DVS DVS
• Air filled, Class F insulated, heavy duty motor, dissipates heat easily, operates cooler with higher efficiencies; longer service life with lower operating costs.• Built-in motor protection with autocut, protects motor against overheating, single phasing, and no load; saves money on costly motor replacement.• Molded cable prevents capillary action; reduces maintenance costs.• Large solids handling capabilities prevents clogging.• Open semi-vortex type recessed impeller; vortex action prevents clogging and handles stringy material better then moving pump age through impeller vanes; provides durability, high reliability, and lowers maintenance costs.• High quality stainless steel shaft; provides high tensile strength, corrosion resistance, longer life, and lower maintenance costs• Double mechanical seals-silicon carbide lower seals, carbon/ceramic upper - hard faced upper and lower seals operate in an oil bath; providing longer service life and lower maintenance costs.• Available for Q.D.C Connection, provides ease of maintenance for sump installations.
• Ideal for waste water application containing soft or fibrous solids • Industrial waste water drainage• Septic effluent• Other drainage operation
Units: mm unless otherwise specified
Pump Model A DA1 DE DF DG L1 L6 QDC QDC
WeightkgModel
DA DE DF DG DT DN DD65 140 175 116 18 4 1580 150 185 126 18 8 15
Units: mm unless otherwise specified
Applicable Models - 65 & 80 DVSNote:
1/. For detailed dimensions of thepumps, refer to separate dimensiondata sheets.
2/. The discharge bend andcompanion flange supplied with thepump are used with the QDC.
3/. The weight in dimension tablesrefers only to the weight of theQDC.
4/. Standard accessories suppliedwith QDC include:-
-Connector body with foundation bolts. -Guide pipe support -Sliding Glide -Adaptor Flange
Guide pipe is not supplied.
QDCModelPump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 D1 E1
QDCWeight
kg
Authorised dealer:
65 DVS 5.75T 363 75 95 120 160 250 145 190 240 125 72 75 95 12 140 LM65 14
65 DVS 51.5 363 75 95 120 160 250 145 190 240 125 72 75 95 12 140 LM65 14
65 DVS 52.2 394 75 95 120 160 250 145 190 240 155 49 75 95 12 140 LM65 14
65 DVS 53.7 394 75 95 120 160 250 145 190 240 155 49 75 95 12 140 LM65 14
80 DVS 5.75T 363 75 95 120 170 255 145 190 240 125 72 75 95 12 140 LM65 14
80 DVS 51.5 363 75 95 120 170 255 145 190 240 125 72 75 95 12 140 LM65 14
80 DVS 52.2 394 75 95 120 170 255 145 190 240 155 49 75 95 12 140 LM65 14
80 DVS 53.7 394 75 95 120 170 255 145 190 240 155 49 75 95 12 140 LM65 14
50 DVS 5.4S 311 50 96 114 76 105 58 LS50 9
50 DVS 5.75S 321 50 96 114 76 105 58 LS50 9
50 DVS 5.4T 311 50 96 114 76 105 58 LS50 9
50 DVS 5.75T 321 50 96 114 76 105 58 LS50 9
50 DVS 51.5 321 50 96 114 76 105 58 LS50 9