SWG Mechatronics
Presentation of region and cluster-activities
PP8 IPE (RO)
1First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011
Some industries are sometimes at sunset… but, in the same time, new opportunities might
rises!
Outline
The analysis of Mechatronics sector in the region of PP8 IPE (RO) regarding the possibilities to create a cluster
- UPB-CETTI-ITA presentation Economic activities & companies involved in the
mechatronics cluster construction Expectations of the companies which will intend to become
cluster members UPB-CETTI-ITA experience in similar activities Necessary support for successful cluster construction
First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011 2
The analysis of Mechatronics sector in the region of PP8 IPE (RO) regarding
the possibilities to create a cluster
3First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011
• Good education facilities in Mechatronics at pre-university & university level. “Politehnica” University of Bucharest: Mechatronics & Mechanics faculty;
• Robotics platform EUROP-RO (Romanian Branch);
• The National Institute of Research and Development in Mechatronics and Measurement Technique (INCDMTM)
• Romanian Review Precision Mechanics, Optics & Mechatronics;
• PRO OPTICS a private joint-stock company;
• UPB-CETTI-ITA Technical & technological low cost offer for prototyping & small series- niche production on market
• Existing UPB-CETTI-ITA contractual business relations
• UPB-CETTI-ITA actions for promoting innovation, electronic technology & interconnection techniques.
First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011 4
Strengths:
Weaknesses:• The crash of almost big industry in the late ’90 that implied the decrease of innovation activities, technological progress and young people interest in Science and Technology;• The old industries are replaced by corporations, who come for lower price qualified human resources without any innovative contribution, and low competitive SMEs; • The gap between SEE region and Central Europe increased. RO, is a catching-up country (BG, HU, SK) with EIS under the EU average value (The European Innovation Scoreboard);• The growth of economy is hindered by the lack of advanced technologies and an adequate culture of and for innovation.
First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011 5
Threats and Difficulties:
• The lack of investments funds;• The structural funds don’t cover cluster constructions;• Reliable cluster model. The memorandum isn’t enough to
assure functionality; • Socio-economical & political legacy in the SEE countries;
Romania: industry reconstruction base on innovative SMEs • Actual socio-economical stage of development in SEE area;• General economic crisis reflection over SEE countries and
EU political aspects influence over SEE countries economy.
First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011 6
First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011 7
The Bucharest-Ilfov is a development region in Romania, encompassing the national capital Bucharest, as well as the surrounding Ilfov County.
Alba, Braşov, Covasna, Harghita, Mureş, and Sibiu County are part of Center development region in Romania, being one of the most ethnically-diverse with heavy technical traditions.
Opportunities: - Lisbon Strategy to reduce imbalances between regions of the Community and realize sustainable economy growth based on innovation as the motor for economic change.-The competitive SMEs in mechatronics- Participation in EU projects- Structural funds- Increasing market
UPB-CETTI-ITA presentation• The Technological and Business Incubator, UPB- CETTI-
ITA was founded as independent financial structure, without juridical personality in frame of Electronic Technology and Reliability Chair, Faculty of Electronic, Telecommunication and Information Technology (ETTI), “Politehnica” University from Bucharest.
• CETTI-ITA is an entity of the National Network for Innovation and Technological Transfer “ReNITT” certified by the Office of Education and Research – National Authority for Scientific Research, patent act no. 11/10.03.2006.
First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011 8
UPB-CETTI-ITA Mission: • Promotion of knowledge transfer, innovations and
technologies developed in the university environment towards industry through physical or virtual incubation of the Small and Middle Enterprises or persons. Analysis of the electronic technology evolution and assumption of the knowledge and technologies from industry in order to develop the technical base as support for increasing the efficiency for activities in university environment.
First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011 9
UPB-CETTI-ITA Technical & technological support
10First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011
Actions for promoting innovation ,
by facilitate and accelerate the natural innovation development especially in the interdisciplinary field of microsystems & mechatronics technologies using intensive and balanced development of the two sides of the knowledge triangle: by education to obtain learned knowledge and by scientific investigations to gain experienced knowledge, to achieve the “critical mass” of people with innovative capabilities. The “critical mass” concept, promoted by UPB-CETTI-ITA, is the threshold for natural sustainable innovation development based on EIS/EII results. (www.elect2eat.eu; www.msystech.eu;
http://www.elan-romania.eu)First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011 11
Innovation
EducationKnowledge
Practice
Theory
Industry
Inventors & Innovative SME
Incr
easi
ng
th
e C
riti
cal
Mas
s o
f p
eop
le
and
SM
Es
by
imp
rove
th
e co
mp
eten
ce
UPBCETTI-ITA
Actions DFM Theory & Hands-on activities
Actions for promoting innovation
12First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011
13First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011
Examples of technical & technological
support offered to SMEs and/or partner companies
First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011 14
Economic activities & companies involved in the mechatronics cluster construction
15First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011
Expectations of the companies which will intend to become cluster members
- Increase the visibility on the market by creating a common marketing platform;
- Exploit the cluster partners complementarities;- Promote common projects and define a common proactive
politics in order to attract and use national & EU funds;- Optimising the common resources usages; - Improve the management and realise efficient organizational
structure for each of cluster partners ( Ex: Transfer the DFM/PCB design activities of one’s partner to UPB-CETT-ITA);
- Create a common data base for suppliers, customers;- Create an adaptive EMS offer to the market (prototyping & small
series/medium & large series) using cluster complementary production facilities.
16First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011
UPB-CETTI-ITA experience in similar activities
The UPB-CETTI-ITA actions to create a cluster structure are base on existing functional & innovative structure based on economic contractual relations of physical & virtual incubated SMEs, national & international partners companies and national & EU project partners;
UPB-CETTI-ITA has a strong experience in organising international workshops, professional contest (Interconnetion Techniques in Electronics – TIE, www.tie.ro, 20th Edition in 2011) and conferences (International Symposium for Design and Technology of Electronics Packages – SIITME, www.siitme.ro, 17th Edition in 2011 ).
17First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011
Necessary support for successful cluster construction
• Reliable models;• To be in connection with similar national & EU construction;• Support in order to clarify legal aspects regarding cluster
construction and work;• Support and partnership for national & EU programs
regarding clusters construction and developing in order to assure functionality and services offered extension;
• To establish conditions and possibilities to be partner at the national & EU Level.
First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011 18
Do you have any Questions ?
Do you have any Questions ?
Prof.Dr. Eng. Sorin MoraruDean of the Faculty of Electrical Engineering and Computer Science,University Transilvania of BrasovEmail: [email protected]
Eng. Ioan PlotogExecutive Director, UPB-CETTI-ITATechnological and Business Incubator, Center for Technological Electronics and Interconnection Techniques, “Politehnica” University of Bucharest Email: [email protected]
Drd. Diaconescu TiberiuAsist. cercet., Institutul de Prognoza Economica,Academia RomanaAsist. univ., Universitatea HyperionEmail: [email protected]
19First Mechatronics SWG in Bologna – Italy, 18th -19th January 2011