Welcome to Caterpillar Equipment Training Operator Certification Program. This class focuses on the safe and effective operation of Caterpillar Hydraulic Excavators. Caterpillar Equipment Training has been in existence since 1995. Students completing the course and earning certification will receive a commemorative belt buckle and a certificate. Students who do not pass will receive a certificate of course completion.�
Excavadoras Hidráulicas
Compartimiento del Operador y Controles
Presenter�
Presentation Notes�
Let’s now talk about the monitor panel on hydraulic excavators.�
Excavadoras Hidráulicas
Compartimiento del Operador
Tablero monitor
Palanca universal derecha
Controles de desplazamiento
Llave de contacto
Bocina
Palanca universal izquierda
alanca de activaciónel control hidráulico
Controles del aireacondicionado y
calefacción
Presenter�
Presentation Notes�
[Go around the class and discuss each lever/control/panel as you build the operator station. Answer any questions the class may have.]�
Excavadoras Hidráulicas
Salida Secundaria
•La ventana trasera es la salida secundaria
Presenter�
Presentation Notes�
The rear window of the Operator Station is a secondary exit in case of an emergency.�
Excavadoras Hidráulicas
Control de Sentido de Desplazamiento
• Giros en redondo o de pivote
• Palancas o pedales de desplazamiento
• Tercer pedal para desplazamien to en línea recta (accesorio)
Presenter�
Presentation Notes�
The B-Series Excavators offer you a choice of travel levers or travel pedals. Both, left and right, travel pedals and levers will allow you to go forward, reverse and turn. You can also spot turn or pivot turn, as well. A third pedal for straight travel is available as an attachment--and equipped only on certain machines. This pedal will move the excavator in a straight line. �
Excavadoras Hidráulicas
Controles
•Consultar la Guía de Operación y Mantenimiento
– Remoción de contrapesos– Pasador de traba de rotación– Interruptor para levantamiento pesado– Control preciso de la rotación
• Interruptor de velocidad del martillo• Pedal del martillo
– Extensión de los bastidores de rodillos
Presenter�
Presentation Notes�
You may encounter machines equipped with controls and switches you are not familiar with. Always consult the Operation and Maintenance Manual before operating.�
Excavadoras Hidráulicas
Movimiento de las Palancas Universales
FIJA
Brazo Afuera
Rotación DerechaRotación Izquierda
Brazo Adentro
FIJA
Bajar Pluma
Descargar CucharónCerrar Cucharón
Elevar CucharónPatrón SAE
Presenter�
Presentation Notes�
The standard Cat excavator system is SAE and the Backhoe Loader System is the second most common system.�
Excavadoras Hidráulicas
Movimiento de las Palancas Universales
FIJA
Bajar Pluma
Rotación DerechaRotación Izquierda
Elevar Pluma
FIJA
Brazo Afuera
Descargar CucharónCerrar Cucharón
Brazo Adentro
Sistema Estándar
de Retroexcavadora
Cargadora
Presenter�
Presentation Notes�
A quick change valve quickly switches between patterns. If the machine is equipped with an optional quick change valve, the proper control pattern must be displayed on an information card in the cab. It is good practice to verify the control pattern with the information card in the cab.�
Excavadoras Hidráulicas
Palanca de Activación Hidráulica
• La posición Trabada (hacia abajo) desactiva todos los controles hidráulicos
• La posición Destrabada (hacia arriba) activa todos los controles hidráulicos
Presenter�
Presentation Notes�
The hydraulic activation control lever in the LOCKED position makes all factory-installed hydraulic controls inoperable. The engine will not start unless the hydraulic activation control lever is in the locked position. �
Excavadoras Hidráulicas
CABINA H.E. SERIE “C”
PALANCAS UNIVERSALES
CONSOLA DE LOS INTERRUPTORES
INTERRRUPTORES DE RESPALDO
PALANCAS DE DESPLAZAMIENTO
Excavadoras Hidráulicas
TABLERO MONITOR
LUZ DE ACCION
PANEL DE CUATRO MEDIDORES
CENTRO DE MENSAJES
PANEL DEL TECLADO
Excavadoras Hidráulicas
FUNCIONES DEL MONITORFunción automática prioritaria
de rotación y de pluma.Para ofrecer una operación mas simple, los interruptores de modalidad de potencia y de modalidad de trabajo han sido eliminados. En cambio, la función automática de prioridad de rotación y de pluma selecciona la mejor modalidad en función del movimiento de la palanca universal simplificando así la operación y optimizando el rendimiento en diferentes aplicaciones.
Excavadoras Hidráulicas
FUNCIONES DEL MONITORControlador de accesorios.
Los cinco ajustes de presión y de flujos de la bomba hidráulica se pueden preajustar en el monitor evitando así tener que ajustar el sistema hidráulico cada vez que se cambia una herramienta y proporcionado al operador la cantidad correcta de flujo y de presión para cada herramienta de forma instantánea. Esta característica esta disponible con el sistema de control de herramientas optativo.
Excavadoras Hidráulicas
Compartimiento del Operador
Presenter�
Presentation Notes�
Let’s watch a video about the Operator Station.�
Excavadoras Hidráulicas
Tablero Monitor Electrónico
•Indicadores e interruptores
•Señales de advertencia
– Luces indicadoras y medidores
– Luz de acción– Alarma de acción
Presenter�
Presentation Notes�
The Electronic Monitor Panel consists of indicators and switches. The indicators are gauges for various machines systems. And the switches are for selecting the various work modes and the power modes. Included on the Electronic Monitor Panel is an action alarm, action light, gauges and alert indicators to let you know when the machine is in trouble. The monitor panel is designed to alert you of an immediate problem or of an impending problem. The panel has individual alert indicators for each machine system that is listed on the monitor panel. The problem could be in more than one of the machine systems that are listed.�
Excavadoras Hidráulicas
Tablero Monitor Electrónico
Medidor de nivelde combustible
Medidor de temperaturadel aceite hidráulico
Medidor de temperaturadel refrigerante del motor
Visualización de caracteres
Velocidad del motor
Luz de acción
Presenter�
Presentation Notes�
[As you build the monitor panel sequence, go around the room and highlight each to class. Students may take the opportunity to ask a question about a certain gauge highlighted.]�
Excavadoras Hidráulicas
Indicadores
Indicador de descarga de la batería
Indicador de presión de aceite del motorIndicador de temperatura del aceite hidráulico
Indicador de temperatura del refrigerante del motor
Indicador del filtro de aire
Presenter�
Presentation Notes�
[Read aloud each indicator to the class as it is highlighted. Ask class if they have any questions and then discuss.]�
Excavadoras Hidráulicas
Indicadores
Indicador del filtro del aceite hidráulico de retorno
Indicador de alerta del controlador
Indicador de irregularidad en el tablero de instrumentos
Indicador del calentador de aire
Presenter�
Presentation Notes�
[Continue to read aloud each indicator and highlight each to the class. Discuss any questions with the class.]�
Excavadoras Hidráulicas
Indicadores de Nivel
Nivel del combustible
Nivel del aceite hidráulico
Nivel del aceite del motor
Nivel del refrigerante
Presenter�
Presentation Notes�
Look again at the various shapes included in each symbol. Each level check shows an arrow. [Read aloud to class as highlighted and discuss]�
Excavadoras Hidráulicas
Modalidades de Trabajo•4 modalidades de trabajo
– Prioridad a la pluma– Prioridad a la rotación– Prioridad al control
preciso– Prioridad del usuario
• Modalidad de apisonamiento• Modalidad de martillo• Modalidad del cliente
Presenter�
Presentation Notes�
The Work Mode selector allows the choice of four modes. They are the Boom Priority Mode, Swing Priority Mode, Fine Control Mode and the User Mode. The User Mode has three submodes which allows you to customize the machine for specific jobs. The four work mode switches are on the left side of the monitor panel. Each work mode switch is set for different boom speeds or for different swing speeds. Only one work mode can be selected at at time. If a new work mode is selected, the previous work mode is deactivated automatically. �
Excavadoras Hidráulicas
Modalidad de Prioridad a la Pluma
• Carga de rotación corta
• Zanjas profundas • Terminado a nivel• Prioridad a
elevación de la pluma
• Usar 3 funciones para eficiencia total
Excavadoras Hidráulicas
Modalidad de Prioridad a la Rotación• Carga de
camiones/zanjeo, volcando el estéril a más de 180 grados
• Nivelación horizontal/de acabado
• Cuando se necesita más fuerza de rotación
• Usar 3 funciones para eficiencia total
Presenter�
Presentation Notes�
�
Excavadoras Hidráulicas
Modalidad de Control Preciso• Trabajo de
levantamiento• Trabajo de acabado
de precisión• 70% de la potencia
del motor• 1 bomba hidráulica
para retraer el brazo en vez de 2
Presenter�
Presentation Notes�
The Fine Control Mode uses 70% of available engine power for lower sound levels, precise implement movement and reduced fuel consumption. This work mode limits the oil flow to the circuit that moves the stick inward. Normally, the oil flow to the circuit that moves the stick inward is available from both pumps. This moves the stick quickly. When the fine control mode is used, the oil flow is limited to one pump. This will slow the stick movement, which allows more control. This work mode is used most often when you finish a slope. This work mode is also used for lifting applications or for fine grading.�
Excavadoras Hidráulicas
Modalidad del Usuario
• Apisonamiento (U1)• Martillo (U2)• Cliente (U3)
Presenter�
Presentation Notes�
�
Excavadoras Hidráulicas
Cómo Establecer la Modalidad del Usuario
•Seleccionar modalidad secundaria
•Muestra modalidad secundaria
•3 modalidades secundarias
Presenter�
Presentation Notes�
To select the sub-mode, press the switch repeatedly until the desired sub-mode is displayed in the right two positions of the liquid crystal display. This work mode has the following three sub-modes: Tamping mode or U1, Hammer Mode or U2 and Customer Mode or U3.�
Excavadoras Hidráulicas
Modalidad de Apisonamiento (U1)
•Operaciones que usan el fondo del cucharón
•La pluma se eleva y baja suavemente
Presenter�
Presentation Notes�
�
Excavadoras Hidráulicas
Modalidad de Martillo (U2)
• Aumenta las posibilidades operativas
• Se deben ajustar de antemano la presión del circuito y el caudal de la bomba
Presenter�
Presentation Notes�
�
Excavadoras Hidráulicas
Modalidad del Cliente (U3)
• Permite al operador elegir los ajustes que prefiera
Presenter�
Presentation Notes�
�
Excavadoras Hidráulicas
Modalidad de Potencia
• Apropiada para trabajo pesado
• 100% de la potencia del motor
Presenter�
Presentation Notes�
�
Excavadoras Hidráulicas
Control Automático del Motor
• Reduce la velocidad del motor si no hay actividad en 3 segundos
• Reduce el consumo de combustible
• Reduce los niveles de ruido
• Opera en 3 modalidades
Presenter�
Presentation Notes�
The Automatic Engine Control automatically reduces engine speed when there is no hydraulic demand or when the hydraulic demand is very small. The AEC is also designed to reduce fuel consumption and noise. It is important to note that the AEC system will be inoperable while the backup switch of the electronic controller system is in the MAN or manual position. If the hydraulic oil is not at a normal operating temperature, the AEC may respond slowly.�
Excavadoras Hidráulicas
Control Automático del Motor• Modalidad 1= Interruptor AEC
desconectado– Reduce las rpm del motor
100 rpm• Modalidad 2= Interruptor AEC
conectado– Reduce las rpm – del motor a 1300
Presenter�
Presentation Notes�
The AEC system will operate in 3 modes. In Mode 1, the electronic controller automatically reduces engine speed by 100 rpm after there has been no hydraulic demand for approximately three seconds. In Mode 2, the AEC system will automatically reduce the engine rpm to approximately 1300 rpm after there has been no hydraulic demand for approximately three seconds. And in Mode 3, whenever the switch for One-Touch Low Idle is activated, the engine speed is reduced to approximately 1100 rpm. Pressing the switch again will allow the engine speed to return to the setting of the engine speed dial. �
Excavadoras Hidráulicas
Botón de Baja en Vacío
•Situado en el extremo superior de la palanca universal derecha
•Reduce la velocidad del motor a 1100 rpm
•Funciona en ambas modalidades
Presenter�
Presentation Notes�
In Mode 3, whenever the switch for One-Touch Low Idle is activated, the engine speed is reduced to approximately 1100 rpm. Pressing the switch again will allow the engine speed to return to the setting of the engine speed dial. �
Excavadoras Hidráulicas
Velocidad de Desplazamiento
• Usar baja velocidad para terreno difícil y alta velocidad para terreno llano
• Velocidad alta continua = 2 horas
• Parar cada 2 horas para dejar enfriar los motores de impulsión
Presenter�
Presentation Notes�
When turning on the engine start switch, the travel speed control is always set at the Low Travel Speed position. Whenever the travel speed control switch is pressed, the travel speed changes. If any other hydraulic circuit is actuated while the machine is traveling in High Speed, the excavator will automatically decrease the travel speed to Low. Continuous travel at High Speed should be limited to two hours. If you need to continue traveling at High Speed for more than two hours, stop the machine for ten minutes before restarting.�
Excavadoras Hidráulicas
Interruptor de Cancelar Alarma• Apaga la alarma de
desplazamiento• Se usa al desplazarse
distancias largas o en lugares seguros
• Se rearma cuando se detiene la máquina
Presenter�
Presentation Notes�
The switch can be used to stop the travel alarm when it is sounding. Push the switch to stop the alarm.�
Excavadoras Hidráulicas
Tablero Monitor de la Serie 300Luz de acción
Medidor de combustible
Temperatura delrefrigerante
Temperatura del aceitehidráulico
Prioridad a la pluma
Prioridad a la rotación
Control preciso
Control Automático del Motor
Ajuste de modalidadesde potencia
Velocidad de desplazamiento Cancelar alarma
Presenter�
Presentation Notes�
Let’s now talk about the 300 -Series monitor panel.�
Excavadoras Hidráulicas
Prueba de Arranque• Autoprueba al arrancar• Conectar llave de arranque• Esperar 2 segundos• Verificar que los módulos
operan correctamente– Destellan los indicadores de
alerta– Funciona la luz de acción– Se desplazan las imágenes
en la ventanilla digital– Suena la alarma de acción
Presenter�
Presentation Notes�
[ Explain how the monitoring system does self-test. ] During self-test, hold key in the “on” position for 2 seconds, all alert indicators flash and the digital display window shows the following readouts: - all indicators are lit - key in “on” position for 2 seconds - action light stays illuminated - action alarm sounds once for 1 second - all this happens in 1.5 seconds �
Excavadoras Hidráulicas
Sistemas Monitores de Prearranque
•Comprobar refrigerante•Comprobar aceite hidráulico•Comprobar aceite del motor
Presenter�
Presentation Notes�
The Pre-Start Monitoring System allows you to check coolant, hydraulic oil and engine oil levels from the monitor inside the cab. However, the pre-start monitoring system does not cover all daily maintenance items. I recommend that you check these levels manually. Also keep in mind that the monitor indicator does not guarantee that the machine is in a good condition. Do not use the monitor panel as the only method of inspection.�