Data sheet DS/TBX5–EN Rev. D
TB(X)5 SeriespH/Redox (ORP) sensors for process monitoring
The most durable pH/Redox (ORP) sensors in the world
Next Step™ Solid State reference— eliminates poisoning, pumping and plugging
Advantage™ Series with solution ground rod— permits continuous sensor diagnostics
Comprehensive selection of measuring electrodes— sensors designed to suit all application requirements
Combination style construction— measuring, reference and temperature elements, all in one
compact body
Insertion, submersion, flow-through and hot-tap— increases flexibility of installation
Integral potted cable— no in-process high impedance connections
Comprehensive selection of wetted materials— assures compatibility with design, budget and process
Operating temperatures up to 140ºC (284ºF)— the highest glass temperature limit on the market
Operating pressures up to 21 bar (300 psi) and higher— the highest pressure limit on the market
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
2
The Most Durable pH/Redox (ORP) Sensorsin the WorldA well deserved reputation for ruggedness, longevity andaccuracy hallmark the TB(X)5 Series pH/Redox sensors. Thesensors are easily applied to most industrial measurementneeds. They are renowned for their ability to outperformconventional sensors in the industries’ toughest processapplications.
Solid-state Next Step™ reference technology is the foundationfor all TB(X)5 Series electrodes. The totally solid inner referencechamber is charged with potassium chloride (KCl). This non-liquid reference all but eliminates poisoning, plugging andpumping problems that plague conventional liquid, slurry andgel designs.
The Next Step Advantage™ series incorporates a solutionground rod that enables sensor diagnostics.
All measurement functions are combined in one compact body:reference, measuring electrode, temperature sensor and groundrod. Using an integral potted cable, a completely sealedassembly is provided without in-process high impedanceconnections.
These advances in reference design, combined with superiorglass electrode technology, result in an industrial sensor withunequalled durability and flexibility.
Electrode
Next Step Reference Electrode
Competing Gel orSlurry-filled Reference
Slurry orGel-filledReservoir
Ceramic orTeflon Junction
OptionalSecond Junction
Ag/AgClElement
Next StepSolid StateReference(Not Shown)
TemperatureCompensator
Ag/AgClElement
MetallicSupport Rodand Ground
Wood and TeflonLiquid Junction
Solution GroundInterface
edoC epyT noitpircseD
sgnitaR
egnaRserutarepmeTgnitarepO taecnadepmI
52 ° 77(C ° )F°C °F
1 ssalgtalF .gniluofyvaehhtiwytudytisnedhgiHaNwoL.noitcnujdiuqilhtiwhsulfedortcelE + .rorre Hp41ot0 001ot01 212ot06 1 M056 Ω
2 esopruplareneGssalg
erutarepmetrewoldnaytudmuidemotthgilroF.HphgihroftoN.snoitacilppa Hp21ot0 001ot0 212ot23 M002 Ω
5 )PRO(xodeR .tnemele)tP(munitalP ot0 ± Vm0002 041ot0 482ot23 k1 Ω6 )bS(ynomitnA .sessecorpFHroevisarbarofedortceleHplateM Hp11ot3 08ot02– 671ot4– k1 Ω
F dicA/ediroulF dnaFHtnecreplarevesotpuybgnihcteottnatsiseR.sdicagnorts Hp21ot0 08ot01 2 671ot05 2 M005 Ω
J tnatsisergnitaoCerutarepmethgiH
gnorts,HpwoldnahgihrofelbatiusdnaelitasreV.slacimehc Hp41ot0 041ot01 482ot05 M005 Ω
setoN . 121ot0)1 ° 052ot23(C ° selcycnoitaziliretsrof)F05)2 ° 221(C ° noitartnecnocFHhgihrofdednemmocer.xam)F
Wide Variety of Sensorsfor Most Industrial ApplicationsABB offers a wide variety of standard sensors for mostapplications. These include variations in body style, measuringelectrode type and shape, temperature compensator, junctiontype and shape and cable. Next Step Advantage™ sensors alsoallow choice of solution ground and O-ring materials.
Durable ElectrodesThe TB(X)5 electrode design eliminates failures due to thermalstress caused by rapid temperature excursions. Unlike othersensors that use a large inner air bubble for expansionabsorption, TB(X)5 electrodes use a unique inner plunger;providing more effective protection against temperaturefluctuations.
The glass manufacturing process uses inoffensive components.The glass contains no barium, cobalt or uranium oxides. Theimpedance is low enough to maintain signal integrity, yet highenough to remain chemically durable with little or no sodium ion(Na+) error.
The electrodes are available in several measuring element typesensuring greatest process optimization.
Sensor Construction
Electrode Types and Ratings
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
3
Body StyleSensor bodies are constructed of Kynar (PVDF) or Ryton (PPS).TB5 Series sensors use Solid-State Next Step™ references. TheTB(X)5 Series denotes Next Step Advantage™ types withintegral solution ground.
Sensor Models and Applications
Reference Junction StylesTo promote TB(X)5 electrode process efficiency, referencejunctions are available as either wood or PTFE, each also offeredin flush or notched forms.
The hardwood junction is recommended for all general purposeduties particularly those requiring high resistance to coating.PTFE junctions are promoted for continuous processes over11.0 pH or those containing known wood delignifiers such asstrong caustics, bleaches and other oxidizers.
Flush junctions have no process protrusions and thereforesupply excellent self-cleaning properties when used with flatglass and fitted at 90° in process pipelines.
Notched junctions provide an integral protection guard fornormal bulb-style glasses and are especially suited forretractable and immersion sensors.
NormalGlass
FlatGlass
Flush Notched
rebmuNledoMydoB noitacilppAetats-diloS
petStxeN ™petStxeNegatnavdA ™
155BT 155XBT SPP,kcol-tsiwT,enil-nI
noisrembuS
655BT 655XBT FDVP,dedaerhT,enil-nI
noisrembuS
755BT 755XBT FDVP pat-toH,rotcarterevlavllaB
165BT 165XBT FDVP elbaziliretS,enil-nI
265BT 265XBT FDVP elbaziliretS,yratinaS
465BT 465XBT FDVP,rotcartererusserphgiH
pat-toH
765BT 765XBT SPP erusserphgiH,enil-nI
Type 1 – Flat Glass
pH
Type 5 – Platinum
ORP
Type 6 – Antimony
pH
pH
Type 2 – General Purpose GlassType F – Fluoride/Acid Resistant GlassType J – Coating Resistant Glass
Electrodes Types
Junction Styles
Junction Styles
)X(BTrosneShsulF dehctoN
dooW EFTP sedortcelE dooW EFTP sedortcelE155 J,F,6,5,2,1
655 6,1 J,F,5,2,1755 6,1 J,F,5,2,1165 J,F,5,1 J,F,5,1265 J,F,5,2,1
465 6 J,F,5,2765 J,F,6,5,2
etoN . noitcelesdilaV= noitcelesdilavnI=
elytS noitpircseD noitacilppA
hsulF rosnesfodnehtiwhsulF sessecorpgniluofyvaeh,enil-nI
dehctoN noitcetorpedortcelegnidivorpnoitcnujdnoyebsdnetxE srosnesnoisremmidna)evlav-llab(pat-toH
Reference Junction Selection
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
4
Temperature CompensationTemperature compensators enable analyzers to adjust fortemperature effects on the glass pH electrode output (Nernst).Selected analyzers can also use this measurement tocompensate for solution pH temperature effects.
Sensors can be ordered with integral temperature sensors or asexternal units.
The integral temperature compensator is available in two forms;Balco 3k and Pt100.
Integral Temperature Compensator
0.4
pHError
0.3
0.20.1
0.0- 0.1
- 0.2
- 0.3
- 0.4
0-5
-10
-15
+ 5
+ 10
+ 15
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
TemperatureChange (°C)From 25° C
Temperature CompensatorLocation (Typical)
ToJunction
Box
Black
Junction BoxWiring
(4TB5023-0088)
Pin Leads(Type 'T' cable)
Female BNC and SpadeLugs for Junction Box
Male BNC / Spade Lug to Pin Leads Extension(Cable 4TB 3011-8XXX)
RedWhiteGreenHeavy Green
WithTemperatureCompensator
(Type '0' Cable)
To TB82,TB84, 4630and AX46
Heavy Green
Pin Leads(Type 'T' cable)
Female BNC and SpadeLugs for Junction Box
Male BNC / Spade Lug to Pin Leads Extension(Cable 4TB 3011-7XXX)
ToJunction
Box
Junction BoxWiring
(4TB5023-0088)
Black
Green
WithoutTemperature
Compensator
(Type '0' Cable)
To TB82,TB84, 4630and AX46
pH Error without Temperature Compensation
Cable OptionsTB(X)5 sensors offer complete flexibility of cabling optionsthroughout the range. All cables are potted inside the sensorensuring environmental protection.
The standard cable length for most sensors is 1.5m(5 ft.). However, cables can be supplied as any continuous sizeup to 9m (30 ft.).
Standard accessories include junction boxes and submersion(immersion) couplers, typically used with extension cables fordirect connection to ABB-TBI instruments.
Extension cables also permit distances between sensor andinstrument of up to 30m (100 ft.) without external preamplifier.
A BNC/TC to pin terminal adapter is available for connection toTB82, TB84, 4630 and AX46 Series instruments.
Sensors with pin terminals are selected with code option ‘T’.Next Step Advantage Sensor Cablesand Junction Box Wiring (TBX5 Models)
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
5
Note.Junction box supplied without cable glands 4TB9515-0165for use with conduit.
Pin LeadsType 'T' cable
Junction Box Wiring(4TB5023-0162)
Male BNCType 'F'cable
Pin LeadsType 'T'cable
Pin Lead Extensionwith Temperature Compensator Connector
(Cable 4TB3011-4XXX)
Male BNCFemale BNC –
to Sensor orJunction Box
Extension Cable(Cable 4TB3011-1XXX)
Female BNC –To Sensor orJunction Box
Pin LeadsTo TB82, TB84and AX46
Pin Extension Cable(Cable 4TB3011-3XXX)
To TransmitterTo Sensor orJunction Box
To Sensor orJunction Box
Pin LeadsTo TB82, TB84and AX46
WithoutTemperatureCompensator
WithTemperatureCompensator
Male BNC and TinnedTemperature Compensator Leads
Type 'F' cable
Male BNC and ExtensionCable Connector on
Temperature Compensator LeadsType 'F' cable
Female BNC to Male BNC Extensionwith Temperature Compensator
Connector to Tinned Leads(Cable 4TB 3011-2XXX)
Solid State and Next Step Reference Sensor Cables and Junction Box Wiring (TB5 Models)
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
6
Models TB551 & TBX551 Ryton SensorsModels TB(X)551 sensors are in-line flow-through orsubmersible (immersion), general purpose, twist-lock stylesensors. The sensor body is molded from chemically resistantRyton (PPS).
The sensor can be adapted to 1 in. fittings by either a threadedRyton receptacle or a twist-lock receptacle. The twist-lockreceptacle is available in Kynar (PVDF) or stainless steel.
Optional electrode guards protect the electrode in submersion(immersion) applications.
Specification
Applications
In-line, flow-through, submersible (immersion)
Max. pressure/temperature
690kPa (100 psi) at 140°C (284°F)
Features
Low cost, universal type.
Adapter for twist-lock, or threaded-cap, insertion
Material
Body Ryton (Polyphenylene Sulphide)
Junction Wood or Teflon (PTFE)
Junction types Flush
Dimensions in mm (in.)
Models TB(X)551 Ryton Sensors
Overall Dimensions – Models TB(X)551
33.0(1.30)
Sensor
Ryton Body
167(6.57)
120.0(4.73)
2.5(0.10)64.5(2.54)
24.4 (0.96)
26.7 (1.05)
Sensor with Junction Box
95.0(3.74)
Electrode
3/4 in. NPT
64.5(2.54)
12 (0.47)
No. 118 Viton O-Rings2 Each
1 in. NPT Tee(CustomerSupplied)
Ryton ThreadedReceptacle
Flow
Safety CatchAssembly
Flex Conduit and Coupling (Customer Supplied)
Open toAllow Airto Escape
ScrewsTurn intoO-RingGroove
316 Stainless SteelSubmersible Guard
PVCSubmersible
Guard
Twist LockReceptacle
316 Stainless SteelKynar
167 (6,57) 71.1(2.80)
3/4 in. NPT
276.9 (10.90)
3/4 in. NPT Conduit Port (2 Typ.)
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
7
Ordering Information – Models TB(X)551
Notes.1) For direct connection to TB82, TB84, 4630/35 and AX46 transmitters or other supplier devices, using terminal blocks.
2) Not available for Platinum, Redox (ORP), or Antimony, pH, electrodes (codes 5 & 6).
3) Not available for fluoride-resistant electrodes (code F). Compatible with TB82, TB84, 4630/35 and AX46 instruments.
4) Kalrez O-rings only for solution ground sleeve. External O-rings are Viton. External Kalrez O-ring kits available separately.
5) TB551 only. There are 2 options to connect to TB82 or TB84 transmitters:
Option 1 – use BNC/TC to PIN adapter with conduit fitting or BNC/TC to PIN adapter. In either case temperature compensator code must be 2 or 4.
Option 2 – select T in integral cable code, not designed for use with extension cables or junction box.
6) TB551: junction box mounted on sensor. Cable length approx. 102mm (4 in.). Requires extension cable.
7) TB(X)551: when selecting JB or JS, cable length is approx. 102mm (4 in.). Requires extension cable. If junction box is ordered separately and longer cable lengthsare required, enter length under code for integral cable.
srosneSetats-diloSdradnatSdoRdnuorGnoituloSoN ⇒ petStxeN ™ )elbisrembus(noisremmI,kcol-tsiwT,enil-nI
041@isp001(ylbmessArosneSPRO/HpydoBnotyR ° )C155BT X X X X X X X X
edortcelEgnirusaeM
1256FJ
001ot01(ssalgtalF ° 09tawolfhtiwsetalucitraphgihrof)Hp41ot0,C °001ot0(Hp,ssalG ° )Hp21ot0,C
)PRO(xodeR,munitalP08ot02–(Hp,ynomitnA ° )Hp11ot3,C
08ot01(tnatsiser-ediroulF,Hp,ssalG ° )Hp21ot0,C041ot5(erutarepmethgih/ssalgtnatsiser-taoC ° )Hp41ot0,C
1256FJ
noitasnepmocomrehTlargetnI
01–3–
155XBTroftoN
155XBTroftoN
enoNk3 Ω sdaeldenniT 2
k3 Ω rotcennocelbacnoisnetxE 2
sdaeldenniT001tP 3,2
rotcennocelbacnoisnetxE001tP 3,2
01234
noitcnuJdiuqiL
AB
petStxeN,hsulf,dooWpetStxeN,hsulf,nolfeT
AB
lairetaMdoRdnuorGnoituloS
123
leetssselniats613muinatiT
2ByolletsaH
155BTroftoN155BTroftoN155BTroftoN
lairetaMgniR-O
1234
notiVMDPE
enociliSzerlaK 4
155BTroftoN155BTroftoN155BTroftoN155BTroftoN
elytSydoB
0 ydobnotyR 0
erawdraHyrosseccA
023456
enoN)8110-5025BT4(elcatpecerkcol-tsiwt,leetssselniatS
)9110-5025BT4(elcatpecerkcol-tsiwt,)FDVP(ranyK)0210-5025BT4(draugelbisrembuS,CVP
)1210-5025BT4(draugelbisrembus,leetssselniatS)0210-5159BT4(elcatpecerdedaerhT,)SPP(notyR
023456
elbaCrosneSlargetnI,erusaeMfostinU 5
–T0
155XBTroftoN teef,rotcennocCNBteef,sdaelniP/denniT 1
detcelesera)woleb(BJnehwesU 7,6
FT0
elbaCrosneSlargetnI,htgneL
–
JJ
–
BS
)stnemercnitoof5ni(htgnelretne)m8.8(tf03)m3.0(tf1.)mc2.67(ni03ot)mc7.21(.ni5fostnemecninielbaliava(
xobnoitcnujhtiW 7,6
xobnoitcnujsseL 7,6
–
JJ
–
BS
155XBT X X X X X X X X X XegatnavdApetStxeN ™ )noisremmI(elbisrembuS,kcol-tsiwT,enil-nI, 1
041@isp001(ylbmessArosneSPRO/HpydoBnotyR ° )C⇐
rofsrosneSgnikcehc-flesnoituloShtiw()doRdnuorG
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
8
Specification
Applications3/4 in. NPT process connection, In-line,submersion (immersion)
Max. pressure/temperature
690kPa (100 psi) at 80°C (176°F)
276kPa (40 psi) at 140°C (284°F)
Material
Body Kynar (PVDF) as standard
Junction Wood or Teflon (PTFE)
Junction types Flush (Antimony and flat glass only)
Notched (recommended)
Flow-through
Specify insertion depth in code
Submersion/Immersion
With notched junction
Models TB(X)556 Kynar Sensors
Models TB556 & TBX556 Kynar SensorsModels TB(X)556 Sensors are threaded style sensors suitablefor submersion (immersion) and insertion into the process pipes.
Mounting thread size is 3/4 in. NPT.
The sensor is available in several insertion lengths from thestandard 40mm (1.5 in.) to a maximum of 127mm (5 in.).
The sensor body is molded from chemically resistant Kynar(PVDF).
Sensor with Junction Box
238.1 (9.38)120.0 (4.73)
3/4 in.NPTConduit Port
(2 Typ.)
71.1(2.80)
95.0(3.74)
3/4 in. NPT Electrode
22.2 (0.80)
Note.27.9mm (1.1 in.)insertion depth notavailable on TBXAdvantage sensorswith solution grounds
27.9 (1.10) Min.38.1 (1.5) Standard
As Specified up to 127.0 (5.00) Max.(see Note)
Rear of Sensor andCable to be Sealedin Conduit or Pipe(Customer Supplied)
3/4 in. Coupling(Customer Supplied)
Kynar Body
Conduit(Customer Supplied)
3/4 in. NPT7/8 in.WrenchFlats
3/4 in. NPT
Notched Sensor
127.0(5.00)
Notched SensorSubmersible Application s
Notched SensorFlow Applications
SampleOutlet
SampleInlet
3/4 in. Tee(customer Supplied)
Dimensions in mm (in.)
Overall Dimensions – Models TB(X)556
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
9
Ordering Information – Models TB(X)556
Notes.1) Antimony pH electrodes supplied only with flush junctions (codes A & B).
2) Not available for, Redox (ORP), or Antimony, pH, electrodes (codes 5 & 6).
3) Not available for fluoride-resistant electrodes (code F). Compatible with TB82, TB84, 4630/35 and AX46 instruments.
4) Flush junctions for flat glass pH and Antimony electrodes only (codes 1 & 6).
5) Notched junctions not available for Antimony electrodes.
6) Manufactured as 1.5 in.depth, includes cable strain relief.
7) There are 2 options to connect TB556 to TB82 or TB84 transmitters:
Option 1 – use BNC/TC to PIN adapter with conduit fitting or BNC/TC to PIN adapter. In either case temperature compensator code must be 2 or 4.
Option 2 – select T in integral cable code, not designed for use with extension cables or junction box.
8) For direct conection to type TB82, TB84, 4630/35 and AX46 transmitters, or other supplier devices, using terminal blocks.
9) TB556: junction box or submersible (immersion) connector mounted on sensor. Cable length approx. 102mm (4 in.). Requires extension cable for Temperaturecompensator code must be 0, 2 or 4.
10) TB(X)556: junction box mounted on sensor. Cable length approx. 102mm (4 in.). Requires extension cable for connection to transmitter. If junction box is orderedseparately and longer cable lengths are required, enter cable length in code for integral cable.
srosneSetats-diloSdradnatSdoRdnuorGnoituloSoN ⇒
petStxeN ™ )noisremmI(elbisrembuS,dedaerhT,enil-nIylbmessArosneSPRO/HpydoBranyK
041@isp04( ° 09@isp001;C ° )C 655BT X X X X X X X X
edortcelEgnirusaeM
1256FJ
001ot01(ssalgtalF ° 09tawolfhtiwsetalucitraphgihrof)Hp41ot0,C ° 1
001ot0(Hp,ssalG ° )Hp21ot0,C)PRO(xodeR,munitalP08ot02–(Hp,ynomitnA ° )Hp11ot3,C 1
08ot01(tnatsiser-ediroulF,Hp,ssalG ° )Hp21ot0,C041ot5(erutarepmethgih/ssalgtnatsiser-taoC ° )Hp41ot0,C
1256FJ
noitasnepmocomrehTlargetnI
01
655XBTroftoN3
655XBTroftoN
enoNk3 Ω sdaeldenniT 2
k3 Ω rotcennocelbacnoisnetxE 2
sdaeldenniT001tP 3,2
rotcennocelbacnoisnetxE001tP 3,2
01234
noitcnuJdiuqiL
ABDE
ecnereferpetStxeN,hsulf,dooW 4
ecnereferpetStxeN,hsulf,nolfeT 4
ecnereferpetStxeN,dehcton,dooW 5
ecnereferpetStxeN,dehcton,nolfeT 5
ABDE
lairetaMdoRdnuorGnoituloS
123
leetssselniats613muinatiT
yolletsaH ® 2B
655BTroftoN655BTroftoN655BTroftoN
lairetaMgniR-O
1234
notiV ®
MDPEenociliS
zerlaK ®
655BTroftoN655BTroftoN655BTroftoN655BTroftoN
elytSydoB
0–15
0–50
655XBTroftoNeborp)noisremmI(elbisrembuS 6
htpednoitresnI.ni1.1htpednoitresni.ni5.1htpednoitresni.ni0.5
0115
0150
elbaCrosneSlargetnI 7
–T0
655XBTroftoN teef,rotcennocCNBteef,sdaelniP/denniT 8
detcelesera)woleb(BJnehwesU 01,9
FT0
elbaCrosneSlargetnI,htgneL
–JJ
–BS
)stnemercnitoof5ni(htgnelretne)m8.8(tf03ot)m3.0(tf1xobnoitcnujhtiW 01,9
xobnoitcnujsseL 01,9
–JJ
–BS
655XBT X X X X X X X X X X egatnavdApetStxeN ™ )noisremmI(elbisrembuS,dedaerhT,enil-nI,ylbmessArosneSPRO/HpydoBranyK
isp04( 041@ ° 09@isp001C ° )C⇐
rofsrosneSgnikcehc-flesnoituloShtiw()doRdnuorG
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
10
Models TB557 & TBX557 Hot-Tap Retractable SensorsModels TB(X)557 sensors are hot tap, ball valve insertionsensors. They enable sensor maintenance or replacementwithout interrupting the process.
An integral safety anti-blowout lip is incorporated into the sensordesign, preventing accidental sensor removal. Unlike chainrestraints, this safety-by-design is an integral part of the sensors'construction.
The sensor is inserted through a standard 11/2 in. or 11/4 in. fullport ball valve. Ease of disassembly aids sensor replacement.
Connection to a ball valve is by compression fitting available ineither hand-tight with 11/4 in. NPT threads or wrench-tight with1 in. NPT threads.
Additional fittings enable the assembly to be flushed and drainedin situ and uses a 11/2 in. NPT threads for connection to the ballvalve.
Specification
Applications
Insertion, Hot-tap
Max. pressure/temperature
690kPa (100 psi) at 80°C (176°F)
276kPa (40 psi) at 140°C (284°F)
Features
Insert/retract without disturbing process flow
Replaceable electrode
Anti-blowout lip
No internal high-impedance connection
Material
Electrode Body Kynar (PVDF) as standard
Sensor sheath variants 316 stainless steel
Hastelloy or Titanium
External O-rings Viton
Junction Wood or Teflon (PTFE)
Junction types Flush (Antimony only)
Notched (recommended)
Lengths Standard 400mm (16 in.)
Maximum 910mm (36 in.)
Overall Dimensions – Compression Fittings
11/4 in. Full Post Ball Valveor 11/2 in. Ball Valve
Compression Fitting
Process Line / Vessel
1/4 in. NPT Flushing Port21/2 in. Dia.
Hand-tight
13/4 in. Hex.
11/4 in. NPT
11/2 in. Hex.13/8 in. Hex.
1 in. NPT
97.8(3.85)
66.7(2.63)
Wrench-tight
Wrench-tightcompression fitting
Hand-tightcompression fitting
1/4 in. NPT Flushing Port
11/2 in. NPT184.7(7.27)
Wrench-tight flush and draincompression fitting
11/2 in. NPT
Hand-tight flush and draincompression fitting
199.4(7.85)
Dimensions in mm (in.)
Models TB557 and TBX557 Sensors
Overall Dimensions – Ball Valve
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
11
…Overall Dimensions – Models TB(X)557
Viton O-Rings Sheath Replaceable SensorKynar Back Piece
Hand-tight Compression Fitting
Installation Detail
26.7 Dia(1.05)22.9 Dia
(0.90)
21.0 Dia(0.83)
ReferenceJunction
Electrode
188(7.40)
No. 019 VitonO-Rings
222.9 (8.78) (Other Lengths Available)27.9(1.10)
Replacement Sensor Detail
Kynar BodyNo 019 VitonO-Rings
316 Stainless SteelTitanium or Hastelloy-CSheath
3/4 in. NPT
95.0 (3.74)
71.1(2.80)
120.0 (4.73)
3/4 in ConduitPort (2 Typ.)
25.4 Dia(1.00) Kynar Back Piece Anti-Blowout Lip
11/4 in. NPT
Optional Compression FittingHand-tight 316 Stainless Steelor Titanium
97.8 (3.85)
11/4 in. NPT Full Port Ball Valve
11/4 in. 316 Stainless SteelClose Nipple
Sensor
Optional Compression FittingWrench-tight 316 Stainless Steel,Titanium or Hastelloy-C
66.7(2.63)
27.9(1.10)
26.7 Dia(1.05) 3/4 in. NTP 1 in. NTP
11/4 in. NPT Full Port Ball ValveReducing Bushing
11/4 in. Close NippleSensor
Installation Detail
Wrench-tight Compression Fitting 28.6(1.13)
Dimensions in mm (in.)
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
12
Ordering Information – Models TB(X)557
srosneSetats-diloSdradnatSdoRdnuorGnoituloSoN ⇒ petStxeN ™ ,ydoBranyK,paTtoH,noitresnIevlaVllaB
041@isp04(ylbmessArosneSPRO/Hp ° 09@isp001;C ° )C 755BT X X X X X X X X
edortcelEgnirusaeM
1256FJ
001ot01(HpssalgtalF ° 09tawolfhtiwsetalucitraphgihrof)Hp41ot0,C °001ot0(Hp,ssalG ° )Hp21ot0,C
)PRO(xodeR,munitalP08ot02–(Hp,ynomitnA ° )Hp11ot3,C 1
08ot01(tnatsiser-ediroulF,Hp,ssalG ° )Hp21ot0,C041ot5(erutarepmethgih/ssalgtnatsiser-taoC ° )Hp41ot0,C
1256FJ
rotasnepmocerutarepmeTlargetnI
01–3–
755XBTroftoN
755XBTroftoN
enoNk3 Ω sdaeldenniT 2
k3 Ω rotcennocelbacnoisnetxE 2
sdaeldenniT001tP 3,2
rotcennocelbacnoisnetxE001tP 3,2
01234
noitcnuJecnerefeR
ABDE
ecnereferpetStxeN,hsulf,dooW 4
ecnereferpetStxeN,hsulf,nolfeT 4
ecnereferpetStxeN,dehctoN,dooW 5
ecnereferpetStxeN,dehctoN,nolfeT 5
ABDE
lairetaMdoRdnuorGnoituloS
123
leetssselniats613muinatiT
2ByolletsaH
755BTroftoN755BTroftoN755BTroftoN
lairetaMgniR-O
1234
notiVMDPE
enociliSzerlaK 6
755BTroftoN755BTroftoN755BTroftoN755BTroftoN
elytSydoB
07ABFGHJKLMNPRS
ylnoedortcele755)X(BTtnemecalpeRhtaehsmuinatiT.ni61
htaehsCyolletsaH.ni61htaehsleetSsselniatS613.ni61
htaehsmuinatiT.ni02htaehsmuinatiT.ni42htaehsmuinatiT.ni03
htaehsCyolletsaH.ni02htaehsCyolletsaH.ni42htaehsCyolletsaH.ni03
htaehsleetSsselniatS613.ni02htaehsleetSsselniatS613.ni42htaehsleetSsselniatS613.ni03
htaehsmuinatiT.ni63htaehsleetSsselniatS613.ni06
07ABFGHJKLMNPRS
erawdraHyrosseccA 7
01234
enoN 8
thgit-hcnerw,gnittifnoisserpmocleetSsselniatS613thgit-hcnerw,gnittifnoisserpmocCyolletsaH
thgit-dnah,gnittifnoisserpmocleetSsselniatS613thgit-dnah,gnittifnoisserpmocmuinatiT
01234
elbaCrosneSlargetnI 9
–T0
755XBTroftoN teef,rotcennocCNBteef,sdaelniP/denniT 01
detcelesera)woleb(5Jot1JroBJnehwesU 21,11
FT0
elbaCrosneSlargetnI,htgneL
–JJJJJJ
–B12345
e)m8.8(tf92ot)m3.0(tf1 )stnemercnitoof5ni(htgnelretn 31
xobnoitcnujhtiW 41
htaehs.ni61rofrosnestnemecalpeR 51
htaehs.ni02rofrosnestnemecalpeR 51
htaehs.ni42rofrosnestnemecalpeR 51
htaehs.ni03rofrosnestnemecalpeR 51
htaehs.ni63rofrosnestnemecalpeR 51
–JJJJJJ
–B12345
755XBT X X X X X X X X X X petStxeN ™ ,egatnavdA ,paTtoH,noitresnIevlaVllaBylbmessArosneSPRO/HpydoBranyK
041@isp04( ° 09@isp001;C ° )C⇐
rofsrosneSgnikcehc-fles
dnuorGnoituloShtiw()doR
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
13
10) For direct connection to type TB82, TB84, 4630/35 and AX46 transmitters,or other supplier devices, using terminal blocks.
11) TB557: junction box mounted on sensor. Cable length varies to match bodylength style. Order code for body style and accessory hardware anythingexcept zero. Requires extension cable. Order code for temperaturecompensator must be 0, 2 or 4.
12) TB(X)557: junction box mounted on sensor. Cable length approx. 102mm (4in.). Order code for body style and accessory hardware anything exceptzero. Code – # # # # # # # 0, J, B. Requires extension cable. If junction boxis ordered separately and longer cable lengths are desired, enter cablelength in integral sensor code.
13) Standard cable length of 4 ft (1.2m) as measured from rear of sensorassembly with 16 in. sheath only. Max. 29 ft (8.8m) cable only available with16 in. sheath. Longer sheaths decrease length accordingly.
14) Applicable to sensors with junction boxes only.
Notes.1) Antimony pH electrodes supplied only with flush junctions (codes A & B).
2) Not available for, Redox (ORP), or Antimony, pH, electrodes (codes 5 & 6).
3) Not available for fluoride-resistant electrodes (code F).Compatible with TB82, TB84, 4630/35 and AX46 instruments.
4) Flush junctions for Antimony electrodes only (code 6).
5) Not available for Antimony electrodes (code 6).
6) Kalrez O-rings only for solution ground sleeve. External O-rings are Viton.External Kalrez O-ring kits available separately.
7) Standard hardware kits have Viton O-rings.
8) Applicable for all body styles. Mandatory for replacement sensors
(code 0 in Body Style section).
9) There are 2 options to connect TB557 to TB82 or TB84 transmitters:
Option 1 – use BNC/TC to PIN adapter with conduit fitting or BNC/TC toPIN adaptor. In either case temperature compensator code must be2 or 4.
Option 2 – select T in integral sensor code, not designed for use withextension cables or junction box.
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
14
Models TB561 & TBX561 Sterizable SensorsModels TB(X)561 sensors are designed for sterilizable or in-lineapplications and for measurements in process vessels or linesrequiring periodic sterilization or cleaning. They are also used inthe TB18 Safe-T-Clean valve and 4TB9515-0190 stainless steelflow cell.
The sensors are available with a bushing and union nut but canalso be retro-fitted into standard DN25 bushings with 0.983 in.to 0.995 in. internal diameters. All hardware required for use withthe TB18 Safe-T-Clean or 4TB9515-0190 Flowcell is includedwith valve or Flowcell when purchased.
Specification
Applications
Batch processing with steam or chemical sterilization, fermenters,glass-lined reactors, pharmaceuticals, food and beverage
Max. pressure/temperatures
690kPa (100 psi) at 90°C (176°F)
448kPa (65 psi) at 121°C (250°F)
276kPa (40 psi) at 140°C (284°F)
Material
Electrode body Kynar (PVDF) as standard
Junction Wood or Teflon (PTFE)
Junction types Flush
Notched
Insertion depths
70mm, 100mm, 150mm or 200mm
(100mm required for TB18 Safe-T-Clean valve and Flowcell)
Models TB561 and TBX561 Sensors
Overall Dimensions – Models TB(X)561
L
Kynar SensorBody
Holder Nut
Flow cell (Requires 100 mm sensor)
No. 020 VitonO-Ring
152.4 (6.00)
Order Code 070:L = 70.0 (2.76)Order Code 100:L = 100.0 (3.94)Order Code 150:L = 150.0 (5.91)Order Code 200:L = 200.0 (7.87)
Front View
Vessel WallWeld
11/4 in. BSP
15°
38.1(1.50)
Tank Bushing
11/4 in. BSP
Note.Holder nut slides over sensorand threads onto tank bushing
198.1(7.8)
166.4(6.55)
38.1(1.50)71.9(2.83)134.9(5.31)
NOTES.1. DASHED LINES REPRESENT DIMENSIONS OF FLOW CELL KIT
WITH SWAGE LOCK FITTINGS.2. FLOW CELL KIT WITHOUT SWAGE LOCK FITTINGS 4TB9515-0223
FLOW CELL KIT WITH SWAGE LOCK FITTINGS 4TB9515-0190
Safe-T-CleanSensor Valve TB18(Requires 100mmsensor with flushliquid junction)
1/2 in. NPT x 1/4 in.Swage Lock Fitting
(3 Typ)83.5(3.29)
38.5 (1.52)
Dimensions in mm (in.)
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
15
Ordering Information – Models TB(X)561
Notes.1) For direct connection to type TB82, TB84, 4630/35 and AX46 transmitters or other supplier devices, using terminal blocks.
2) Not available for Platinum, Redox (ORP), electrodes (code 5).
3) Kalrez O-rings only for solution ground sleeve. External O-rings are Viton. External Kalrez O-ring kits available separately.
4) Insertion depth measured from wetted face of sensor flange to tip of guard.
5) TB561only. There are two options to connect to TB82 or TB84 transmitters:
Option 1 – use BNC/TC to PIN adapter with conduit fitting or BNC/TC to PIN adapter. In either case temperature compensator code must be 2 or 4.
Option 2 – select T in integral cable code, not designed for use with extension cables or junction box .
6) TB561: junction box mounted on sensor. Cable length approx. 102mm (4 in.). Requires extension cable. If junction box is ordered separately and longer cable lengthsare required enter length under code position for integral cable.
7) Not compatible with all TB18 Safe-T-Clean valve styles.
8) Required for use in most TB18 Safe-T-Clean valves.
9) Required for use with TB18 Safe-T-Clean valves and 4TB9515-0190 Flowcell. Consult TB18 Product Specification sheet for comprehensive measuring electrodeselection.
srosneSetats-diloSdradnatSdoRdnuorGnoituloSoN ⇒ petStxeN ™ ylbmessArosneSPRO/HpydoBranyKelbaziliretS
121@isp56( ° )C165BT X X X X X X X X X
edortcelEgnirusaeM
125FJ
001ot01(ssalgtalF ° 09tawolfhtiwsetalucitraphgihrof)Hp41ot0,C °8
001ot0(Hp,ssalG ° )Hp21ot0,C)PRO(xodeR,munitalP
08ot01(tnatsiser-ediroulF,Hp,ssalG ° )Hp21ot0,C041ot5(erutarepmethgih/ssalgtnatsiser-taoC ° )Hp41ot0,C
125FJ
rotasnepmoCerutarepmeTlargetnI
01
165XBTroftoN3
165XBTroftoN
enoNk3 Ω sdaeldenniT 2
k3 Ω rotcennocelbacnoisnetxE 2
sdaeldenniT001tP 2
rotcennocelbacnoisnetxE001tP 2
01234
noitcnuJecnerefeR
ABDE
petStxeN,hsulf,dooWpetStxeN,hsulf,nolfeT
petStxeN,dehcton,dooW 7
petStxeN,dehcton,nolfeT 7
ABDE
lairetaMdoRdnuorGnoituloS
123
leetssselniats613muinatiT
2ByolletsaH
165BTroftoN165BTroftoN165BTroftoN
lairetaMgniR-O
1234
notiVMDPE
enociliSzerlaK 3
165BTroftoN165BTroftoN165BTroftoN165BTroftoN
htpeDnoitresnI 4
0112
7050
0000
mm07mm001 9
mm051mm002
0112
7050
0000
elbaCrosneSlargetnI,erusaeMfostinU 5
–T0
165XBTroftoN teef,rotcennocCNBteef,sdaelniP/denniT 1
detcelesera)woleb(SJ/BJnehwesU 7,6
FT0
elbaCrosneSlargetnI
–JJ
–BS
m8.8)tf03(ot)m3.0(tf1 e )stnemercnitoof5ni(htgnelretnxobnoitcnujhtiW 7,6
relpuocelbisrembus/xobnoitcnujsseL ,6 7
–JJ
–BS
165XBT X X X X X X X X X X X egatnavdApetStxeN ™ elbaziliretS, 1
121@isp56(ylbmessArosneSPRO/HpydoBranyK ° )C ⇐rofsrosneS
htiw(gnikcehc-fles)doRdnuorGnoituloS
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
16
Models TB562 & TBX562 Sanitary SensorsModels TB(X)562 sensors are designed for processes needingthe use of sanitary (hygienic) fittings. These sensors have a11/2 in. tri-clamp flange fitting and are suitable for processesusing steam or chemical cleaning.
Specification
Applications
Food & Beverage, Dairy,
Pharmaceuticals
Max. pressure/temperature
690kPa (100 psi) at 90°C (176°F)
448kPa (65 psi) at 121°C (250°F)
276kPa (40 psi) at 140°C (284°F)
Material
Electrode body Kynar as standard
External O-ring Viton
Junction Wood or Teflon (PTFE)
Junction types Flush
Mounting 11/2 in. polished sanitary tube flange
1 in. and 11/2 in. tri-clamp for flush style
Models TB(X)562 Sensors
Overall Dimensions – Models TB(X)562
29.0 (1.14) Dia.Standard Style
4.6 (0.18)46.2(1.82)
53.3 (2.10)139.7 (5.50)
86.4 (3.40)
34.3 (1.35) Dia.
69.9 (2.75)
52.1 (2.05)Flange Gasket(Customer Supplied)
Standard Style
3/4 in. NPT
11/2 in. Tri-Clamp Tee(Customer Supplied)
No. 216 VitonO-Ring
3/4 in. NPT
Liquid Junction
Flush Style
Kynar Body3.6 (0.14)Radius
SanitaryFlange
50.5 (1.99)
34.3 (1.35) Dia.
147.3 (5.80)
Flush Style
SanitaryFlange Gasket(Customer Supplied)
Vessel(CustomerSupplied)
Wall
26.7(1.05)
Dia.Front View
69.9(2.75)
139.7(5.50)
11/2 in. Kynar Tri-ClampFlange Mount Sensorwith TemperatureCompensator
ElectrodeGroove forSanitary Gasket
139.7 (5.50)
Dimensions in mm (in)
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
17
Ordering Information – Models TB(X)562
Notes.1) For direct connection to type TB82, TB84, 4630/35 and AX46 transmitters or other supplier devices using terminal blocks.
2) Not available for Platinum, Redox (ORP), electrodes (code 5).
3) TB562 only. There are two options to connect to TB82 or TB84 transmitters:
Option 1 – use BNC/TC to PIN adapter with conduit fitting or BNC/TC to PIN adapter. In either case temperature compensator code must be 2 or 4.
Option 2 – select T in integral cable code, not designed for use with extension cables or junction box.
4) TB562: junction box mounted on sensor. Cable length approx. 102mm (4 in.). Requires extension cable. Temperature compensator code position must be 0, 2 or4.
5) TB(X)561: when selecting JB or JS cable length is approx. 102mm (4 in.). Requires extension cable. If junction box is ordered separately and longer cable lengths arerequired enter length under code position for integral cable.
srosneSetats-diloSdradnatSdoRdnuorGnoituloSoN ⇒ petStxeN ™ rosneS)PRO(xodeR/HpelbaziliretS
121@isp56(ylbmessArosneSydoBranyK ° )C265BT X X X X X X X X
edortcelEgnirusaeM
125FJ
001ot01(HpssalgtalF ° 09tawolfhtiwsetalucitraphgihrof)Hp41ot0,C °001ot0(Hp,ssalG ° )Hp21ot0,C
)PRO(xodeR,munitalP08ot01(tnatsiser-ediroulF,Hp,ssalG ° )Hp21ot0,C
041ot5(erutarepmethgih/ssalgtnatsiser-taoC ° )Hp41ot0,C
125FJ
rotasnepmocerutarepmeTlargetnI
01–3–
265XBTroftoN
265XBTroftoN
enoNk3 Ω sdaeldenniT 2
k3 Ω rotcennocelbacnoisnetxE 2
sdaeldenniT001tP 2
rotcennocelbacnoisnetxE001tP 2
01234
noitcnuJecnerefeR
AB
petStxeN,hsulf,dooWpetStxeN,hsulf,nolfeT
AB
lairetaMdoRdnuorGnoituloS
1 leetssselniats613 265BTroftoN
lairetaMgniR-O
123
notiVMDPE
enociliS
265BTroftoN265BTroftoN265BTroftoN
lairetaMydoB
0 )FDVP(ranyK 265BTroftoN 0
elytSydoB
01
pmalc-irT.ni5.1,dradnatSpmalc-irT.ni5.1/0.1,hsulF
01
elbaCrosneSlargetnI,erusaeMfostinU 3
–T0
265XBTroftoN teef,rotcennocCNBteef,sdaelniP/denniT 1
detcelesera)woleb(SJroBJnehwesU 5,4
FT0
elbaCrosneSlargetnI
–JJ
–BS
)stnemercnitoof5ni(htgnelretne)m8.8(tf92ot)m3.0(tf1xobnoitcnujhtiW 5,4
xobnoitcnujsseL 5,4
–JJ
–BS
265XBT X X X X X X X X X XegatnavdApetStxeN ™ rosneS)PRO(xodeR/HpelbaziliretS, 1
121@isp56(ylbmessArosneSydoBranyK ° )C ⇐rofsrosneSgnikcehc-flesnoituloShtiw()doRdnuorG
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
18
Specification
Applications
High pressure, hazardous materials
Max. pressure/temperature
2065kPa (300psi) at 140°C (284°F)
Features
Insert/Retract without disturbing process
Retraction housing for safety
Taps for flushing or pressurizing
Material
Electrode body Kynar (PVDF)
Ball-valve/hardware 316 stainless steel(other materials on request)
External O-rings Viton
Junction Wood or Teflon (PTFE)
Junction Types Flush (Antimony only)Notched (recommended)
Models TB564 and TBX564 Sensors
Overall Dimensions – Models TBX564
41(1.60)
38(1.50)
41(1.61)
334(13.1)
174(6.85)
13(0.50)
3/4 in. Conduit Port (2 Typ.)
Note.All pipe threads have Loctite PST sealant applied at the Factory.
120.0 (4.73)
3/4 in. NPT
95.0 (3.74)
71.1(2.80)
63.5 Max.(2.50)
3/4
O-Ring
21/8 in.Wrench Flats
11/4 in. NPT
43.2(1.70)
110 (4.33)268 (10.6)
Weld
11/2 in.316 Stainless SteelBall Valve
Reducing Coupling Guide
ReplaceableKynar Sensor
ExtractionHousing
End Cap
CompressionFitting with N o. 014Viton O-Ring
CompressionFitting1/2 in. NPT
1/2 in.Elbow
19/16 in.Wrench Flats (not shown)
No. 217 Viton
in. NPT
Insertion Assembly1/2 in. Tube, 1/8 in. Wall
1/4 in. 316 Stainless SteelPipe Plug (2 Typ.)
Interior O-Ring No. 115 Viton
Dimensions in mm (in.)
Models TB(X)564 are high pressure, hot-tap, ball-valve, insertionsensors. They permit sensor maintenance or replacementwithout interrupting the process.
A retraction housing is provided for isolating the sensor bodyfrom the operator. Using 1/4 in. taps, the housing can be flushedduring retraction or pressurized before insertion.
Models TB564 & TBX564 High Pressure Hot-tap Retractable Sensors
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
19
Ordering Information – Models TBX564
Notes.1) For direct connection to type TB82, TB84, 4630/35 and AX46 transmitters or other supplier devices using terminal blocks.
2) Antimony electrodes only supplied with flush junctions (code A and B).
3) Not available for Platinum, Redox (ORP), or Antimony, pH, electrodes (code 5 and 6).
4) Not available for fluoride-resistant electrodes (code F). Compatible with TB82, TB84, 4630/35 and AX46 instruments.
5) Not available for Antimony electrodes (code 6).
6) Kalrez O-rings for solution ground sleeve only. External O-rings are Viton. External Kalrez O-ring kits available separately.
7) Requires installation of BNC connector kit.
8) There are two options to connect TB564 to TB82 or TB84 transmitters:
Option 1 – use BNC/TC to PIN adapter with conduit fitting or BNC/TC to PIN adapter. In either case temperature compensator code must be 2 or 4.Option 2 – select T in sensor cable code, not designed for use with extension cables or junction box.
9) Junction box mounted on insertion rod. Cable length approx. 254mm (10 in.). Requires extension cable to connect to transmitter. Order code for temperaturecompensator must be 0, 2 or 4. If sensor is ordered without accessory hardware a junction box must be ordered separately.
10) Requires BNC field mount for replacement sensors.
11) Maximum pressure: 690 kPa (100 psi).
srosneSetats-diloSdradnatSdoRdnuorGnoituloSoN ⇒ petStxeN ™ , )PRO(xodeR/Hppat-toHerusserPhgiH 1 rosneS
041@isp003(ylbmessA ° )C465BT X X X X X X X X
edortcelEgnirusaeM
1256FJ
001ot01(ssalgtalF ° 09tawolfhtiwsetalucitraphgihrof)Hp41ot0,C ° 11
001ot0(Hp,ssalG ° )Hp21ot0,C)PRO(xodeR,munitalP08ot02(Hp,ynomitnA ° )Hp11ot3,C 2
08ot01(tnatsiser-ediroulFHp,ssalG ° )Hp21ot0,C041ot5(erutarepmethgih/ssalgtnatsiser-gnitaoC ° )Hp41ot0,C
1256FJ
rotasnepmocerutarepmeTlargetnI
01–3–
465XBTroftoN
465XBTroftoN
enoNk3 Ω sdaeldenniT 3
k3 Ω rotcennocelbacnoisnetxE 3
sdaeldenniT001tP 4,3
rotcennocelbacnoisnetxE001tP 4,3
01234
noitcnuJecnerefeR
ABDE
petStxeN,hsulF,dooW 2
petStxeN,hsulF,nolfeT 2
petStxeN,dehctoN,dooW 5
petStxeN,dehctoN,nolfeT 5
ABDE
lairetaMdoRdnuorGnoituloS
123
leetssselniats613muinatiT
2ByolletsaH
465BTroftoN465BTroftoN465BTroftoN
lairetaMgniR-O
1234
notiVMDPE
enociliSzerlaK 6
465BTroftoN465BTroftoN465BTroftoN465BTroftoN
elytSydoB
0 ydobrosnesranyK,dradnatS 0
erawdraHyrosseccA
09A
enoN 7
ylbmessarosnes465)X(BTledoMetelpmoC htiw htiw htiw htiw htiw evlav-llaberawdrahrosnes465)X(BTledoM tuohtiw tuohtiw tuohtiw tuohtiw tuohtiw evlav-llab
09A
elbaCrosneSlargetnI,erusaeMfostinU 8
–T0
465XBTroftoN teef,rotcennocCNB 01
teef,sdaelniP/denniT 1 )dednemmoceR(detcelesera)woleb(SJ/BJnehwesU 9
FT0
elbaCrosneSlargetnI
–JJ
–BS
)stnemercnitoof5ni(htgnelretne)m8.8(tf03ot)m3.0(tf1xobnoitcnujhtiW 9
xobnoitcnujsseL 9
–JJ
–BS
465XBT X X X X X X X X X X egatnavdApetStxeN ™ pat-toHerusserPhgiH)PRO(xodeR/Hp
041@isp003(ylbmessArosneS ° )C⇐
rofsrosneSgnikcehc-fles
dnuorGnoituloShtiw()doR
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
20
Specification
Applications
High pressure insertion
Max. pressure/temperature
1380kPa (200 psi) at 140°C (284°F)
1725kPa (250 psi) at 100°C (212°F)
Features
2-piece sensor, double O-ring
Sealed body with stainless steel sleeve
Materials
Electrode body Ryton (Polyphenylene sulphide)
Outer sleeve 316 stainless steel(other materials available)
External O-rings Viton
Reference junction Wood or Teflon (PTFE)
Junction type Flush
3/4 in. NPT Conduit Port (2 Typ.)
345.1(13.59)
71.1(2.80)
95.3 (3.74)
120.0(4.73)
Junction Box(see Note)
Kynar Adapter
Assembled Sensor
13/16 in. Wrench Flats1 in. NPT
3/4 in. NPT
Electrode
19.1(0.75)
Assembled Sensor
1 in. NPT 1 3/16 in. Wrench Flats 1 in. NPT
196.9 (7.75)6.4 (0.25)
12.7 (0.50)
28.6 (1.13)
Replaceable Body
Ryton BodyNo. 118 VitonO-Rings (2 Typ)
Stainless SteelSleeve
165.1 (6.50)30.1
(1.19)
26.67 (1.05)
316 StainlessSteel Body
Models TB567 and TBX567 Sensors
Overall Dimensions – Models TB(X)567
Dimensions in mm (in.)
Models TB(X)567 sensors are high pressure, in-line sensors.Their permissible pressure and temperature ratings are unique inthe industry.
After consultation with ABB, customers have exceeded thestandard ratings of 1724kPa (250 psi) at 100°C (212°F). Manyinstallations are operating at over 6895kPa (1000 psi).
The assembly comprises two parts: a 316 stainless steelhousing and a molded Ryton sensor body.
Models TB567 & TBX567 High Pressure In-Line Sensors
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
21
Ordering Information – Models TB(X)567
Notes.1) For direct connection to type TB82, TB84, 4630/35 and AX46 transmitters or other supplier devices using terminal blocks.
2) Antimony pH electrodes only supplied with flush junctions (code A and B).
3) Not available for Platinum, Redox (ORP), or Antimony, pH, electrodes (code 5 and 6).
4) Not available for fluoride-resistant electrodes (code F). Compatible with TB82, TB84, 4630/35 and AX46 instruments.
5) Kalrez O-rings for solution ground sleeve only. External O-rings are Viton. External Kalrez O-ring kits available separately.
6) There are two options to connect TB567 to TB82 or TB84 transmitters:
Option 1– use BNC/TC to PIN adapter with conduit fitting or BNC/TC to PIN adapter. In either case temperature compensator code must be 2 or 4.
Option 2 – select T in sensor cable code, not designed for use with extension cables or junction box.
7) Junction box mounted on sensor. Cable length approx. 254mm (10 in.). Requires extension cable to connect to transmitter. Order code for temperature compensatormust be 0, 2 or 4. If sensor is ordered without accessory hardware a junction box must be ordered separately.
srosneSetats-diloSdradnatSdoRdnuorGnoituloSoN ⇒ petStxeN ™ )PRO(xodeR/HperusserPhgiHeniL-nI
041@isp002(ylbmessArosneS ° )C765BT X X X X X X X X
edortcelEgnirusaeM
256FJ
001ot0(Hp,ssalG ° )Hp21ot0,C)PRO(xodeR,munitalP08ot02(Hp,ynomitnA ° )Hp11ot3,C 2
08ot01(tnatsiser-ediroulFHp,ssalG ° )Hp21ot0,C041ot5(erutarepmethgih/ssalgtnatsiser-taoC ° )Hp41ot0,C
256FJ
rotasnepmocerutarepmeTlargetnI
01–3–
765XBTroftoN
765XBTroftoN
enoNk3 Ω sdaeldenniT 3
k3 Ω rotcennocelbacnoisnetxE 3
sdaeldenniT001tP 4,3
rotcennocelbacnoisnetxE001tP 4,3
01234
noitcnuJecnerefeR
AB
petStxeN,hsulf,dooWpetStxeN,hsulf,nolfeT
AB
lairetaMdoRdnuorGnoituloS
123
leetssselniats613muinatiT
2ByolletsaH
765BTroftoN765BTroftoN765BTroftoN
lairetaMgniR-O
1234
notiVMDPE
enociliSzerlaK 5
765BTroftoN765BTroftoN765BTroftoN765BTroftoN
elytSydoB
0 ydobrosneS765)X(BTledoM 0
erawdraHyrosseccA
0D
enoNgnisuohrosnesleetssselniats613765)X(BTledoM
0D
elbaCrosneSlargetnI,erusaeMfostinU 6
–T0
765XBTroftoN teef,rotcennocCNBteef,sdaelniP/denniT 1
detcelesera)woleb(SJ/BJnehwesU 7
FT0
elbaCrosneSlargetnI
–JJ
–BS
)stnemercnitoof5ni(htgnelretne)m8.8(tf03ot)m3.0(tf1xobnoitcnujhtiW 7
xobnoitcnujsseL 7
–JJ
–BS
765XBT X X X X X X X X X X egatnavdApetStxeN ™ , )PRO(xodeR/HperusserPhgiHeniL-nI 1
041@isp002(ylbmessArosneS ° )C ⇐gnikcehc-flesrofsrosneS
dnuorGnoituloShtiw()doR
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
22
Accessories
Automatic CleanersABB sensors are designed to resist fouling and pluggingespecially when placed in sufficient velocity.
Sometimes a lack of velocity or the precipitative properties of theliquid require the use of an automatic cleaner.
ABB supplies jet-wash type cleaning facilities for submersion(immersion) TB556 sensors with 11/2 in. insertion depth.
When coupled to a customer-supplied solenoid valve deliveringwash fluid, effective cleaning can be initiated by ABB pHinstrumentation such as the TB84PH or AX46 Series. Forexample, the TB84PH can be configured:
• Wash cycle time 0 to 99.99 hours
• Wash on time 0 to 999 seconds
• Wash recovery time 0 to 999 seconds
• Hold function ON or OFF
Hydraulic Cleaner with Models TB(X)556 Sensor
Corrosion Resistant Tubing(Customer Supplied)
Solenoid Valve(Customer Supplied)
CleaningSolution
1/4 in. Union(Customer Supplied)
1/4 in. 316 Stainless Steel
1/4 in. Polypropylene
2 in. NPT Threads
Set Screw to SecureDelivery Tube
Hydraulic CleanerHousing
(PVC)
3/4 in. NPT
pH Sensor with anInserton Depth of 1.5 in.
PCV or Stainless Steel3/4 in. Coupling
(Customer Supplied)
PCV or Stainless Steel3/4 in. Conduit
(Customer Supplied)
Configurable ParametersInclude: Cycle Time, On Time,Recovery Time and Hold Outputs
Hydraulic Cleaner Application Example
Specification
Model
4TB5205-0232
Materials
PVC, Polypropylene
316 stainless steel
Max. pressure/temperature
690kPa (100 psi) at 40°C (104°F)
276kPa (40 psi) at 60°C (140°F)
pH/Redox (ORP) Sensors for Process MonitoringTB(X)5 Series DS/TBX5–EN Rev. D
23
pH/Redox (ORP) Transmitters
Model Description
TB82PH Advantage Series – 2-wire 24V d.c. 4 to 20mA
pH/Redox/pIon Transmitter – Certified intrinsically safe
– SMART-key programming
– On-line sensor diagnostics
– Configurable output
– Multi-temperaturecompensations
– Adjustable damping
– Hold output
– Configurable security code
– HART communication
– NEMA 4X/IP65 housing
– CE approved
TB84PH Advantage Series – AC-powered instrument
pH/Redox/pIon Transmitter – SMART-key programming
– On-line sensor diagnostics
– Configurable output
– Multi-temperaturecompensations
– Adjustable damping
– Hold output
– Configurable security code
– NEMA 4X/IP65 housing
– CE approved
– 3-relay outputs
– 2 analog outputs
– Wash control function
AX460 – AC-powered instrument
pH/Redox Transmitter – Simple menu programming
– Configurable output
– Multi-temperaturecompensations
– Hold output
– Configurable security code
– NEMA4/IP65 housing
– 1/4 DIN panel-mount housing
– CE approved
– 3 relay outputs
– 2 analog outputs
– Wash control function
…Accessories
Ball-Valves for TB(X)557 Sensors
Model Description
4TB5205-0174 11/4 in. 316 stainless steelIncludes 11/4 in. to 1 in. reducingbushing with 11/4 in. nipple.For wrench-tight compressionhardware 4TB4953-0024 only.
4TB5205-0175 11/2 in. Kynar (PVDF)Includes 11/2 in. to 1/4 in. reducingbushing with 11/2 in. nipple.For wrench-tight compressionhardware 4TB4953-0019 only.
4TB5205-0217 11/4 in. 316 stainless steelIncludes 11/4 in. nipple.For hand-tight compressionhardware 4TB4953-0006 only.
4TB5205-0218 11/2 in. Kynar (PVDF)Includes 11/2 in. to 11/4 in.reducing bushing with 11/2 in.nipple.For hand-tight compressionhardware 4TB4953-0060 or4TB4953-0065 only.
4TB5205-0254 11/2 in. 316 stainless steelIncludes 11/2 in. to 11/4 in.reducing bushing with 11/2 in.nipple.For hand-tight compressionhardware 4TB4953-0060 only.
4TB5205-0255 11/2 in. 316 stainless steelIncludes 11/2 in. to 1 in. reducingbushing with 11/2 in. nipple.For hand-tight compressionhardware 4TB4953-0024 only.
Acknowledgements
Hastelloy® is a registered trademark of Haynes International Inc.
Halar® is a registered trademark of Ausimont USA Inc.
Kalrez® and Viton are registered trademarks of DuPont Dow Elastomers L.L.C.
Kynar® is a registered trademark of Elf Atochem North America Inc.
LOCTITE® is a registered trademark of Loctite Corporation
Ryton® is a registered trademark Chevron Phillips Chemical Company
Teflon® is a registered trademark of E.I. DuPont de Nemours Company Inc.
Next Step™ and Next Step Advantage™ are trademarks of ABB Automation Inc.
Contact us
DS
/TB
X5–E
N R
ev. D
06.2
011ABB Inc.
Process Automation843 N Jefferson StreetPO Box 831Lewisburg 24901-9509USATel: +1 800 HELP 365 (435 7365)Fax: +1 304 647 1862
ABB Inc.Process Automation125 E. County Line RoadWarminsterPA 18974USATel: +1 215 674 6000Fax: +1 215 674 7183
ABB LimitedProcess AutomationOldends LaneStonehouseGloucestershire GL10 3TAUKTel: +44 1453 826 661Fax: +44 1453 829 671
www.abb.com
NoteWe reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.
We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts – is forbidden without prior written consent of ABB.
Copyright© 2011 ABBAll rights reserved