TOOLS REQUIRED: Powered screwdriver.
myolgoffice.com
Team Table 4 LegInstallation Guide
myolgoffice.com
Team Table 4 LegINSTALLATION GUIDE
COMPONENTS1 Leg x42 Adjustable Foot x43 Leg Cable Cover x44 Rail x45 6
2 Way Connector x4
7 2 Way Connector Cap x4
Table Top x1
SCREWS8 M8x12mm Dome Head x89 M8x20mm Cap Head x4 10 M5x20mm Self Tapping x8
1
2
3
4
567
98
10
myolgoffice.com
Team Table 4 LegINSTALLATION GUIDE
01
03 04
02
Slide the 2 way connectors over each leg, and securely lock into place using M8x20mm cap head bolts.
Securely connect legs to rails widths using the shorter M8x20mm dome head bolts.
Securely connect legs to rails lengths using the shorter M8x20mm dome head bolts.
Ensure the worksurface is centered over the frame. Pre-drill holes in the worksurface. Fully tighten all M5x20mm self tapping screws through each leg and rail spacer bracket into the 25mm worksurface.
myolgoffice.com
Team Table 4 LegINSTALLATION GUIDE
05
Conceal any power box cables using the leg cable covers.