Technische Dokumentation
Technical Documentation
XOMOX
Fully Lined Plug Valves
Two-way 021–121-8121 ISO5211 XOMOX International GmbH & Co. Dok. Nr.: tdb_lpv-iso_gb Von-Behring-Straße 15 D-88131 Lindau / Deutschland August 2014
Design Features & Benefits
XOMOX®
fully lined plug valves are cavity-free. Due to the special body design, the liner is firmly locked.
Plug coating is extended over the shaft sealing. Liners manufactured by XOMOX®
are non-porous and 100% dielectrically spark tested.
For safety reasons, liner wall thickness are oversized.
Plastic liner materials are selected according to requirements. XOMOX
® plug valves are used for applications
where other materials have insufficient chemical resistance or are not economical.
XOMOX® plastic lined plug valves fully meet the leakage requirements of EN12266-2 Standard, page 12, leak
rate A.
Scope of Supply
Materials: Body EN-JS1049 (GGG 40.3, 0.7043) or A352-LCB (DN 32 only in 0.7043) ISO Cover and Stop 1.4408 Body lining: PFA Plug: Up to DN 32 NPS 1 ¼ plug core made form steel (1.0570)
From DN 40 NPS 1 ½ plug core made from EN-JS1049 (GGG 40.3, 0.7043)
or steel (1.0570/ 1.0727) PFA lining
Jacket: 1.0038
Face-to-face dimension acc. to EN 558-1 / EN 558-2 Standard design for manual operation: up to DN 100 / NPS 4: with handle from DN 150 / NPS 6: with worm gear For pneumatic and electric actuators please refer to technical data sheet tdb_xrp.
Temperature range: 233 K up to 473 K (-40°C up to 200°C) for PFA
Suitable for vacuum service: (1.33 mbar / hPa) Operating pressure depends on body material and valve class (see the PT graph on page4 for more details)
Available sizes and flange dimensions: PN 10 DN 15 - 300 PN 16 DN 15 - 300 CL 150 NPS ½ - 12 CL 300 NPS ½ - 10 ( with WCB body) JIS 10 k DN 15 - 300
Paint: 1) Standard paint: 1 compound Urethane-Alkyde green RAL 6011
Application: Primer for further paints on 1- or 2 compound level
2) On request: Epoxy primer and coating based on AY-PUR (Acryle-Polyuretane) orange
RAL2009 Application: Industrial and Sea water environment. Further paintings on request.
Orders without specifications will be delivered with standard paint.
XOMOX International GmbH & Co. Tel.: ++49(0)8382/702-0 Doc. No.: tdb_lpv-iso_gb Page 2 of 8 Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: Sharmila Saha August 2014
Type test approval VdTÜV-M229 for plants subject to inspection: Rule Dampfkv DruckbehV Gas HL-VO VbF Code TRD TRB/TRR TRGL/DVGW TRbF
Optionen: - Jacketed versions
- Valves cleaned for chlorine-application
- Valves cleaned for oxygen-application Actuator mounting in acc. with ISO 5211 enables simple and economical quarter-turn valve operation
All actuation parts centered to plug shaft ensure that lateral forces don’t influence the atmospheric sealing.
Item Qty. Description Material
1 3 Set Screws A4-70 2 4 Cover Screws A4-70 3 1 Cover 1.4408 4 1 Anti-Satic Device 1.4571 5 1 Trust Collar 1.4301 6 1 Metal Diaphragm 1.4301 7 1 Formed Teflon®
Diaphragm
8 1 Wedge Ring Teflon® 9 1 Plug EN-JS 1049 (GGG 40.3);
PFA coated 10 1 Body EN-JS 1049 (GGG 40.3),
PFA 11 1 Set screw A4-70 12 1 Lock Nut A4-70
XOMOX International GmbH & Co. Tel.: ++49(0)8382/702-0 Doc. No.: tdb_lpv-iso_gb Page 3 of 8 Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: Sharmila Saha August 2014
Flow Coefficient, Kv in m3/h, Cv=1,156 Kv
DN NPS
15 1/2
20 3/4
25 1
32 1 1/4
40 1 1/2
50 2
65 2 1/2
80 3
100 4
150 6
200 8
250 10
300 12
Cv 9,2 9,2 34,7 34,7 72,8 144,5 144,5 254 462 925 1381 2075 3063
Kv 8 8 30 30 63 125 125 220 400 800 1195 1795 2650
Valve coefficients for process control: DN 15 – 300 / NPS ½ - 12
Angel of aperture 9° 18° 27° 36° 45° 54° 63° 72° 81° 90°
Rated travel 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
Recovery factor FL - 0.89 0.88 0.87 0.85 0.82 0.78 0.72 0.68 0.64
Factor FL2 - 0.79 0.77 0.76 0.72 0.67 0.61 0.52 0.46 0.41
Valve Characteristic zy - 0.50 0.49 0.48 0.47 0.44 0.41 0.36 0.33 0.30
Pressure differential ratio T - 0.67 0.65 0.64 0.61 0.56 0.51 0.44 0.39 0.34
Valve style modifier Fd The calculation value is a function of the required flow coefficient
Pressure- Temperature- Rating for body and liner
Temperature in °C - 40 - 20 0 20 40 60 80 100 120 140 160 180 200 Operating pressure PFA 0 17 17 17 17 16 15 14 13 12 11 10 8
Maximum allowable operating temperature of lining: PFA: 200°C
XOMOX International GmbH & Co. Tel.: ++49(0)8382/702-0 Doc. No.: tdb_lpv-iso_gb Page 4 of 8 Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: Sharmila Saha August 2014
XOMOX®
Fully Lined Flanged
Two Way Valves
XOMOX International GmbH & Co. Tel.: ++49(0)8382/702-0 Doc. No.: tdb_lpv-iso_gb Page 5 of 8 Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: Sharmila Saha August 2014
Type 121 flanges as per DIN PN 10-16 Type 021 flanges as per ANSI Class 150 Type 8121, 8021, flanges drilled to JIS 10 K
Other pressure classes on request Exact types per size see dimension table below.
Dimensions with wrench in mm
DN NPS L H Q ISO 5211 Approx. weight / kg Break-away torque DIN ANSI DIN ANSI DIN/ANSI DIN ANSI [Nm]
15 ½ 130 * 94 260 F05 3.4 3.4 65 20 ¾ 150 * 94 260 F05 4.0 4.0 65 25 1 160 127 94 260 F05 5.0 3.2 65 32 1¼ 180 * 94 260 F05 7.0 7.0 65 40 1½ 200 165 106 362 F05 7.8 6.0 100 50 2 230 178 118 435 F07 11.4 9.5 160 65 2½ 290 * 118 435 F07 16.0 16.0 160 80 3 310 203 132 435 F07 17.4 14.5 210 100 4 350 229 149 600 F10 29.4 22.5 300
XOMOX International GmbH & Co. Tel.: ++49(0)8382/702-0 Doc. No.: tdb_lpv-iso_gb Page 6 of 8 Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: Sharmila Saha August 2014
Fully Lined Two Way Valves Dimensions with gear
C
D
B A
J
Dimensions with gear in mm
DN NPS L A B C ISO 5211 D J Approx. weight / Break-away kg torque
DIN ANSI DIN ANSI DIN/ANSI DIN ANSI [Nm] 100 4 350 229 233 265 250 F10 52 184 43.0 36.0 300 150 6 ** 267 304 343 300 F12 66.7 223 53.4 650 200 8 ** 292 380.5 424 457 F14 89.5 279 88.0 1200 250 10 ** 330 408.5 464 610 F14 123 366 150.0 1800
DN 300 / NPS 12 on request Face-to-face dimensions and flanges ** Type 121Face–to-face and flanges – drilled as per DIN * Type 0121 Face-to-face and flanges DIN – drilled as per ANSI CIass 150 Type 8121 Face-to-face and flanges DIN – drilled as per JIS 10 K Type 8021 Face-to-face and flanges ANSI – drilled as per JIS 10 K
Other pressure classes on request
XOMOX International GmbH & Co. Tel.: ++49(0)8382/702-0 Doc. No.: tdb_lpv-iso_gb Page 7 of 8 Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: Sharmila Saha August 2014
Design and Dimensions of Wrenches for XOMOX®
Plug Valves (with flow direction indicator)
Figure 1 Standard Wrench
Material: Aluminium Figure 2 Wrench with hub cap
Material: Steel (Special Design for DN 15 - 80 / NPS ½ - 3)
Figure 3 T-Wrench
Material: Steel
DN NPS H H1 Q Weight in kg
15 ½ 76 45 180 0.1 20 ¾ 76 45 180 0.1 25 1 96 46 260 0.2 32 96 46 260 0.2 40 1 ½ 106 45 362 0.3 50 2 118 47 435 0.4 65 112 47 435 0.4 80 3 132 47 435 0.4
DN NPS H H1 Q Weight in kg
15 ½ 68 36 190 0.3 20 ¾ 68 36 190 0.3 25 1 80 30 250 0.7 32 80 30 250 0.7 40 1 ½ 91 30 300 1.1 50 2 108 37 450 1.6 65 102 37 450 1.6 80 3 122 37 450 1.6
100 4 151 45 600 3.2
DN NPS H H1 Q Weight in kg
15 ½ 132 100 300 0.3 20 ¾ 132 100 300 0.3 25 1 195 145 300 0.6 32 195 145 300 0.6 40 1 ½ 206 145 400 0.9 50 2 216 145 500 1.3 65 210 145 500 1.3 80 3 230 145 500 1.3 100 4 256 150 600 2.8
T-Wrench: Recommended wrench for isolated piping systems. DN 150 – 250 / NPS 6 – 10 are standard equipped with a worm gear Subject to technical modifications
Crane Co., and its subsidiaries cannot accept responsibility for possible errors in catalogues, brochures, other printed materials, and website
information. Crane Co. reserves the right to alter its products without notice, including products already on order provided that such alteration can
be made without changes being necessary in specifications already agreed. All their trademarks in this material are property of the Crane Co. or
its subsidiaries. The Crane and Crane brands logotype are registered trademarks of Crane Co. All rights reserved. XOMOX International GmbH & Co. Tel.: ++49(0)8382/702-0 Doc. No.: tdb_lpv-iso_gb Page 8 of 8 Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: Sharmila Saha August 2014