SIGNIFICANTLY REDUCE YOUR OPERATING COSTS AND CARBON FOOTPRINT BY USING THE THERMA-START IDLE MANAGEMENT SYSTEM.
Haul trucks, shovels,dozers, loaders,excavators, graders,articulated trucks, service trucks,
MONITORS engine block temp,battery voltage, and air pressure.
REDUCES fuel consumption, excessive emissions, engine wear and maintenance intervals.
COMPLETE engine idle control and management system.
Idle Management System Therma-Start Off-Highway
Therma-Start is a non-invasive retrofit start-stop system that easily installs on any diesel equipment.
CANADA
2234 Carpenter Street
Abbotsford BC V2T 6B4
PHONE 800-865-1532 FAX 604-859-8425 www.thermex-systems.com
USA
726 Cherry Street, P.O. Box 8000,
Sumas WA 98295
Distributed by:
Idle Management SystemTherma-Start Off-Highway
What are the benefits of using Therma-Start?
Using a 789C CAT Haul truck for example:
Payback Period: The payback from fuel savings is accomplished in less than a month in the example above. When you also factor in significantly extended maintenance intervals over 1000 hours per year, your payback escalates dramatically.
From 12 hours down to 2.4 hours per shift.
From 149 Gals (564 L) down to 30 Gals (114 L) per shift.
From 2,866 lbs (1,300 kg’s) of Co2 down to 573 lbs (260 kg’s) of Co2 per shift.
Reduced Fuel Consumption
Reduced Idle Time
Reduced Carbon Emissions
SAFETY DOOR SWITCH
TS CONTROL UNIT
BLOCK / AMBIENT SENSORS
THROTTLE POSITION SENSOR
AIR PRESSURE SENSOR
COMBO STROBE AND SIREN
QUICK DISCONNECTHARNESS
INSTALLATION WIRINGHARNESS
Kit Components