T h i n B r i c k
I n n o v a t i v e T h i n Wa l l S y s t e m s
E n d i c o t t T h i n B r i c k E n d i c o t t T h i n B r i c k
Arboretum Lakes Building 2 – Lisle, IL
E N D I C O T T M E A N S T I M E L E S S B E A U T Y“Because value is so important to our clients, we like to specify Endicott tile for our projects. its rich, fired look gives our buildings the timeless, classic beauty that our clients want. The variety of available shapes allows us to provide exacting detail and gives the appearance of real brick on corners, columns and along corbels.
The long-term value that we emphasize to our clients is the low maintenance required by Endicott tile. its resistance to efflorescence is a major factor in preserving the beauty of the finish. The beauty and low maintenance of this tile offers the ideal combination for satisfying client needs and safeguarding their investment.”
(Governor Plaza and Plaza Del Mar)
Brian Paul,PresidentBrian Paul & AssociatesSan Diego, CA
Governor Plaza – San Diego, CA
Plaza Del Mar – Del Mar, CA
RIGHT: Brian Paul & Associates is the architect for Plaza Del Mar and Governor Plaza in San Diego, CA.Both buildings use Medium Ironspot #46 Smooth (1⁄2 x 21⁄4 x 7 5⁄8) thin brick.
MEDIUM IRONSPOT #46 – SMOOTH TEXTURE
1 2
Front Cover: Governor Plaza – San Diego, CA
A P P L I C A T I O N S F O R E N D I C O T T T H I N B R I C K A R E L I M I T E D O N L Y B Y T H E I M A G I N A T I O N.Endicott thin brick is ideally suited to year-round commercial, residential and remodeling applications.
Genuine, kiln-fired thin brick possesses all the durability and unparalleled elegance of Endicott face brick, yet when installed, maximizes space and weighs considerably less.
E n d i c o t t T h i n B r i c k
E n d i c o t t T h i n B r i c k E n d i c o t t T h i n B r i c k
1⁄2” Tile
Latex Thin Set Mortar
Scratch and Leveling Coatwith Latex Admix
MORTAR BED SYSTEM
Concrete Block Infill Wall or Existing Masonry
Grout Joint with Latex Admix
3.4 # Galvanized DiamondWire Mesh
Concrete Block
15 # Builder’s Felt
THIN BED SYSTEM WITH LEVELING COAT
Pre-Cast or Poured in Place Concrete1⁄2” Tile
Leveling Coat withLatex Admix
Grout Joint withLatex Admix
Latex Thin Set Mortar Pre-Cast orPoured Concrete
MORTAR BED SYSTEM
Pre-Fabricated or On-Site Panelization1⁄2” Tile
Grout Joint withLatex Admix
Latex Thin Set Mortar
Scratch and Leveling Coat with Latex Admix
3.4 # Galvanized DiamondWire Mesh
Exterior GradeGypsum Wallboard
MetalStud
Insulation15 # Builder’s Felt
PANEL SYSTEM
Pre-Fabricated or On-Site Panelization
Grout Joint withLatex Admix
Latex Thin Set Mortar
1⁄2” Tile Insulation
Steel Stud
Cement Backer Board
Waterproof Membrane
T H I N W A L L S Y S T E M Sinnovative wall systems, utilizing thin brick and tile aswall coverings, provide exciting design opportunitiesin today’s competitive building market.
Various concepts (see schematics below), eitherprefabricated as panels in the factory or set-in-placeon site, offer numerous wall system options.
Design assistance and cost analysis are availablethrough local tile contractors or panel fabricators.
Thin Brick and Tile Cladding Benefits:
• Design freedom
• Lightweight construction
• Quick installation
• Economical in-place cost
• Durability and fire resistance
• Increased insulation value
• All-weather construction
Carlsbad Pacifica – Carlsbad, CAArchitect: Krommenhoek/McKeown & Associates – San Diego, CAThin Brick: Medium Ironspot #77 Smooth (1⁄2 x 21⁄4 x 7 5⁄8)
MEDIUM IRONSPOT #77 – SMOOTH TEXTURE
3 4
Carlsbad Pacifica – Carlsbad, CA
Details courtesy of Laticrete International Inc.
E n d i c o t t T h i n B r i c kE n d i c o t t T h i n B r i c k
E n d i c o t t T h i n B r i c k E n d i c o t t T h i n B r i c k
1/2 x 2 1/4 x 7 5/8 - 6.86 pcs./sq. ft.1/2 x 3 5/8 x 7 5/8 - 4.50 pcs./sq. ft.1/2 x 3 5/8 x 11 5/8 - 3.00 pcs./sq. ft.Corners (2 1/4”) - 4.50 pcs./lin. ft.Corners (3 5/8”) - 3.00 pcs./lin. ft.
Edge Cap - 1.50 pcs./lin. ft.Edge Cap - 3 Sided
Left/Right - 1.00 pc./cornerRolok Sill - 4.50 pcs./lin. ft.
M E T R I C C O N V E R S I O N
Soft Conversion: A simple mathematical calculation (inches x 25.4 = mm) that changes Imperial dimension (inches) to metric (millimeters).Hard Conversion: Actual physical changes in dies and equipment to produce metric dimensions (millimeters).
Additional edge cap designs are available upon request.
ROLOK SILLROLOK SILL
BRAKET
BRICK CORNERBC 448
BRICK CORNERBC2 1/4 48
TOP/SIDE ANGLE STARTER ANGLE
EDGE CAP CORNERS
RIGHTLEFT
EDGE CAP
Imperial1/2 x 2 1/4 x 7 5/81/2 x 3 5/8 x 7 5/81/2 x 3 5/8 x 11 5/81/2 x 2 1/4 x 11 5/8
Soft (mm) 12.5 x 57 x 19412.5 x 92 x 19412.5 x 92 x 29512.5 x 57 x 295
Hard (mm) 12.5 x 57 x 19012.5 x 90 x 19012.5 x 90 x 29012.5 x 57 x 290
E S T I M A T I N G D A T A
Cypress West – Tampa, FLArchitect: Johnston Dana Associates – Tampa, FLThin Brick: Medium Ironspot #77 (1⁄2 x 21⁄4 x 7 5⁄8)
MEDIUM IRONSPOT #77 – SMOOTH TEXTURE
1/2 x 2 1/4 x 81/2 x 4 x 81/2 x 4 x 121/2 x 2 1/4 x 12
E n d i c o t t T h i n B r i c k5 6
T H I N B R I C K S I Z E S A N D T R I M U N I T S
To enhance in-place installation,
Endicott thin brick features a distinct
keyback design. Meets requirements of
ASTM c1088 Specifications. Testing
data is available upon request.
Cypress West – Tampa, FL
E n d i c o t t T h i n B r i c k E n d i c o t t T h i n B r i c kE n d i c o t t T h i n B r i c k E n d i c o t t T h i n B r i c k
McKellar Research – La Jolla, CA
Samus 8 & 805 – San Diego, CAArchitect: Brian Paul & Associates – San Diego, CAThin Brick: Medium Ironspot #77 Smooth (1⁄2 x 21⁄4 x 7 5⁄8)
MEDIUM IRONSPOT #77 – SMOOTH TEXTURE
McKellar Research – La Jolla, CAArchitect: Brian Paul & Associates – San Diego, CAThin Brick: Medium Ironspot #46 Smooth (1⁄2 x 21⁄4 x 7 5⁄8)
MEDIUM IRONSPOT #46 – SMOOTH TEXTURE
7 8
Samus 8 & 805 – San Diego, CA
E n d i c o t t T h i n B r i c k E n d i c o t t T h i n B r i c k
Variel Court – Woodland Hills, CAThin Brick: Manganese Ironspot Smooth (1⁄2 x 35⁄8 x 7 5⁄8)
WesTerra Corp. – San Diego, CA Valmont Industries – Omaha, NE
Valmont Industries – Omaha, NEArchitect: DLR Group – Omaha, NEThin Brick: Desert Ironspot Wirecut (1⁄2 x 21⁄4 x 7 5⁄8)
DESERT IRONSPOT – WIRECUT TEXTURE
WesTerra Corp. – San Diego, CAArchitect: Nogle, Hawkins & Onufer – San Diego, CAThin Brick: Medium Ironspot #46 Smooth (1⁄2 x 21⁄4 x 7 5⁄8)
MEDIUM IRONSPOT #46 – SMOOTH TEXTUREMANGANESE IRONSPOT – SMOOTH TEXTURE
E n d i c o t t T h i n B r i c k
Variel Court – Woodland Hills, CA
9 10E n d i c o t t T h i n B r i c k
E n d i c o t t T h i n B r i c k
I N S T A L L A T I O N T E C H N I Q U E S
Whether it is a new construction or remodeling project, Endicott thin brick may be applied over any structurally sound substrate. And, because no footings or supports are required, the thin brick may extend all the way to grade.
There are a number of substrate panels and prefabricated wall panel systems available to the industry that can receive the thin brick as factory or job site applied.*
reputable installation system suppliers have literature that you may obtain for review regarding project applicability.
The standard Endicott thin brick unit size is 2 1/4” x 7 5/8”. Additional unit sizes—3 5/8” x 7 5/8”; 7 5/8” x 7 5/8”; 3 5/8” x 11 5/8”; 2 1/4” x 11 5/8”—can, however, be specified for special applications. Endicott thin brick meets the requirements of ASTM c1088 specifications.
To fully complement the installation process, Endicott also offers all necessary trim units.
* code requirements vary from one municipality to the next. check with your local code Authority and Engineer for certification of system prior to the start of application.
T H I N B R I C K C O N S T R U C T I O N D E T A I L S
T H I N B R I C K A N D
T I L E T E X T U R E S
To add depth and character, select from six thin brick textures and three tile textures:
SMOOTH (Thin Brick and Tile)
STONETEx (Thin Brick and Tile)
SAND HERITAGE(Thin Brick Only)
SAND FINISH(Thin Brick Only)
VELOUR(Thin Brick Only)
WIRECUT(Thin Brick and Tile)
Arboretum Lakes Building 1 – Lisle, IL
S H A P I N G T H E I M A G I N A T I O N W I T H E N D I C O T T F L O O R T I L EEndicott tile are manufactured from the same ironspot clays that are used in making face brick and pavers.
The shapes and trim units pictured below are available in a variety of colors and textures—Smooth, Wirecut and Stonetex.
T I L E S I Z E S A N D S P E C I F I C A T I O N S
For specifications and installation recommendations please refer to the following publications by the Tile council of north America, inc. (TcnA), 100 clemson research Blvd., Anderson, Sc 29625. • Recommended Standard Specifi cations For Ceramic Tile—TCA 137.1
• Handbook For Ceramic Tile Installation11 12
TILE STEP TREAD
1/2”
SURFACE BULLNOSESB 484
SURFACE BULLNOSESB 488
TRANSITION TILE(TT 488)
SURFACE BULLNOSESB 4848 L/R
SURFACE BULLNOSESB 41212
SURFACE BULLNOSESB 4124
SURFACE BULLNOSESB 888
COVE BASECB 68
COVE BASE CORNERCB 68 L/R
SURFACE BULLNOSESB 412412 L/R
SURFACE BULLNOSESB 8888
E n d i c o t t T h i n B r i c k E n d i c o t t T h i n B r i c k
E N T E R A N E W , A E S T H E T I C A L L Y B E A U T I F U L D I M E N S I O N.A myriad of project applications are majestically enhanced by this array of Endicott thin brick and tile colors:
DESERT IRONSPOT (LIGHT) – SMOOTH TEXTURE
MEDIUM IRONSPOT #77 – SMOOTH TEXTURE
DARK IRONSPOT – SMOOTH TEXTURE
MEDIUM IRONSPOT #46 – WIRECUT TEXTURE
MANGANESE IRONSPOT – WIRECUT TEXTURE
RED BLEND – WIRECUT TEXTURE
COPPERTONE – VELOUR TEXTURE
ROSE BLEND – VELOUR TEXTURE
AUTUMN SANDS – SAND TEXTURE
ORLEANS SANDS – SAND TEXTURE
SAHARA SANDS – SAND TEXTURE
BORDEAUx BLEND – SMOOTH TEXTURE
GOLDEN BUFF – SMOOTH TEXTURE
SANDSTONE LIGHT & DARK – SMOOTH TEXTURE
DESERT IRONSPOT (DARK) – WIRECUT TEXTURE
RED IRONSPOT – VELOUR TEXTURE
DESERT SANDS – SAND TEXTURE
MERLOT SANDS HERITAGE – SAND HERITAGE TEXTURE
BURGUNDY SANDS – SAND TEXTURE
GREY SANDS – SAND TEXTURE
BURGUNDY BLEND – SMOOTH TEXTURE
ExECUTIVE IRONSPOT – VELOUR TEXTURE
BROWN SANDS – SAND TEXTURE
13 14
Endicott Clay Products CoP.O. Box 17Fairbury, Nebraska USA 68352402/729-3315 FAX: 402/729-5804
Endicott Tile LLCP.O. Box 645Fairbury, Nebraska USA 68352402/729-3323 FAX: 402/729-5804
[email protected] endicott.com
ENC-TBB-0409
Endicott has been building one success story after another all across the U.S.
The unique clays found only in Jefferson county, nebraska, make it possible for Endicott to produce a wide variety of face brick, pavers, tile, thin brick and special shapes that are nationally recognized for their quality and aesthetic beauty.
Endicott products are distributed throughout the United States. For literature, samples and the name of your nearest distributor, contact Endicott today.
Try our new Masonry Designer and Virtual Mason now at endicott.com
S I N C E 1 9 2 0