TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Transnational Skill StandardsKnitting Machine Operator – Flat Bed Knitting
REFERENCE ID: TSC/Q 4102
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Mapping for Knitting Machine Operator – Flat Bed Knitting(TSC/Q4102) with UK NOS Link to Indian Qualification Pack:http://www.nsdcindia.org/sites/default/files/files/Knitting-Machine-Operator-Flat-Bed-Knitting.pdf
Link to UK Qualification: Not Specified
How to Read this Document This document has two sections - Section I and Section II.
Section I: Compares the NOS listing in the Indian QP –Knitting Machine Operator – Flat Bed Knitting(TSC/Q4102)with UKNOS.
Section II: Compares the competencies described in each of the Indian NOS with those of UK.
The language of the compared competencies of the two countries differs. However, the competency pointers of the described competency can be mapped. Wherever the competency pointer maps it is reported as ‘None’ under the column ‘Gap in Indian NOS’. Wherever the competency pointers do not map, it is identified as a gap and the corresponding UK competency is noted under the column ‘Gap in Indian NOS’. Multiskilling is practised in UK while different job roles exist in Indian context for the equivalent process. Such areas have been identified as gap in the Indian NOS and the corresponding UK competency is noted under the column ‘Gap in Indian NOS’.
Usage of Benchmarked Transnational StandardsThere will be two types of users of these benchmarked standards. One type will be of those individuals who are already trained and are certified on the corresponding Indian QP. This set of individuals will have to undergo a bridge course comprising of the identified gaps only. Thereafter, they will be assessed under the aegis of a UK Awarding body through the Indian SSC on the competency portions acquired via the bridge course. All qualifying individuals will be awarded a co-branded certificate comprising oflogo of Skill India, Indian SSC and UKAwarding Body.
Those individuals who wish to be certified afresh will have to undergo training on both the Indian QP and the gaps in the Indian NOS with regard to UK competencies. Thereafter, they will be assessed under the aegis of a UK Awarding body through the Indian SSC and they will obtain a co-branded certificate comprising of logo of Skill India, Indian SSC and UK Awarding Body.
1
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Section I:NOS Mapping of Knitting Machine Operator – Flat Bed Knitting(TSC/Q4102)with UKNOS.
NOS Mapping: A Summary Indian NOS Code
Indian NOS UK NOS Code UK NOS Remarks, if any
TSC/N9001 Maintain work area, tools and machines
SKSMSP2 Contribute to achieving product quality
Eleven of UK NOS are covered in one Indian NOS
SKSTEX1 Manufacture textile SKSTEX8 perform quality control
procedure in the textile industry
SKSTEX11 Provide support services for textile production
SKSTEX15 Control the efficiency of textile production
SKSTEX16 Produce textile products SKSTEX17 perform manual textile
operations SKSTEX20 maintain machinery and
equipment SKSTEX41 Prepare / thread the
yarn for weft/circular knitting
SKSTEX42 Manufacturing knitted textiles (warp, weft and circular)
SKSTEX43 Control the efficiency of the knitting process (warp and weft)
TSC/N9002 Working in a team SKSTEX11 Provide support services for textile production
Three of UK NOS are covered in one Indian NOS
SKSLWDC25 Maintain effective working relationships
SKSTEX14 Prepare for textile manufacturing operations
TSC/N9003 Maintain health, safety and security at work place
SKSHS1 Health, safety andsecurity at work
TSC/N9004 Comply with industry and organizational
SKSTEX13 Maintain and improve your work
Three of UK NOS are
2
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
NOS Mapping: A Summary Indian NOS Code
Indian NOS UK NOS Code UK NOS Remarks, if any
requirement SKSTEX41 Prepare / thread the yarn for weft/circular knitting
covered in one Indian NOS
SKSTEX43 Control the efficiency of the knitting process (warp and weft)
TSC/N4105 Taking Charge and Handing over Shift to Knitting Machine Operator-Flat bed Knitting
SKSMSP2 Contribute to achieving product quality
Eleven of UK NOS are covered in one Indian NOS
SKSTEX8 perform quality control procedure in the textile industry
SKSTEX11 Provide support services for textile production
SKSTEX14 Prepare for textile manufacturing operations
SKSTEX15 Control the efficiency of textile production
SKSTEX16 Produce textile products
SKSTEX17 perform manual textile operations
SKSTEX20 maintain machinery and equipment
SKSTEX41 Prepare / thread the yarn for weft / circular knitting
SKSTEX42 Manufacturing knitted textiles (warp, weft and circular)
SKSTEX43 Control the efficiency of the knitting process (warp and weft)
TSC/N4106 Operating the Flat Bed Knitting Machine
SKSMSP2 Contribute to achieving product quality
Eleven of UK NOS are covered in one Indian NOS
SKSTEX8 perform quality control procedure in the textile industry
SKSTEX11 Provide support services for textile production
3
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
NOS Mapping: A Summary Indian NOS Code
Indian NOS UK NOS Code UK NOS Remarks, if any
SKSTEX14 Prepare for textile manufacturing operations
SKSTEX15 Control the efficiency of textile production
SKSTEX16 Produce textile products SKSTEX17 perform manual textile
operations SKSTEX20 maintain machinery and
equipment SKSTEX41 Prepare / thread the
yarn for weft/circular knitting
SKSTEX42 Manufacturing knitted textiles (warp, weft and circular)
SKSTEX43 Control the efficiency of the knitting process (warp and weft)
TSC/N4107
Piecing the yarn and doffing the fabric roll in the knitting machine
SKSMSP2 Contribute to achieving product quality
Six of UK NOS are covered in one Indian NOS
SKSTEX16 Produce textile products
SKSTEX17 perform manual textile operations
SKSTEX20 maintain machinery and equipment
SKSTEX41 Prepare / thread the yarn for weft knitting
SKSTEX43 Control the efficiency of the knitting process (warp and weft)
TSC/N4108 Repair yarn related faults in Flat Bed Knitting
SKSTEX8 perform quality control procedure in the textile industry
Two of UK NOS are covered in one Indian NOS
SKSTEX42 Manufacturing knitted textiles (warp, weft and circular)
Note: The most optimum matching UK NOS has been presented against each Indian NOS in this document in section II.
4
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Section II:Compares the competencies in Indian NOS with those of UK NOS.
NOS Mapping Descriptions
Indian QP Title Knitting Machine Operator – Circular Knitting
UK Qualification Not Specified
Indian QP Code TSC/Q4101 UK Qualification Code Not Specified
Indian NOS Code TSC/N 4105 UK NOS Code SKSTEX15
Indian NOS Taking charge of shift and handing over shift to Knitting Machine Operator–Flat Bed Knitting
UK NOS Control the efficiency of textile production
Scope This unit/task covers the following:
Taking charge of shift from Knitting machine operator-Flat bed knitting
Handing over shift to Knitting machine operator-Flat bed knitting
Overview 1. Overseeing the manufacturing of textile product 2. Organising and controlling the manufacturing process
5
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Competency Mapping
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps inIndianNOS
PC8 clean the machine and department before handing over the shift. PC9 hand over the necessary operational tools if any. PC10 meet the next shift operator and give the information regarding the count, GSM, loop length, process, issues faced in quality, and current fabric production followed in the knitting department. PC11 note the production details for the current shift PC12 ensure proper functioning of the machine and problems if any, should be reported to the supervisor and maintenance incharge. PC13 give details to the next shift operator about the current order quality, quantity and balance quantity. PC14 convey information regarding new order fabric details and quantity.
P1 carry-out handover procedures
None
PC10 meet the next shift operator and give the information regarding the count, GSM, loop length, process, issues faced in quality, and current fabric production followed in the knitting department. PC11 note the production details for the current shift PC12 ensure proper functioning of the machine and problems if any, should be reported to the supervisor and maintenance incharge.
P2 pass on essential information and any instructions at handover points during production
None
6
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps inIndianNOS
PC13 give details to the next shift operator about the current order quality, quantity and balance quantity. PC14 convey information regarding new order fabric details and quantity. KA2 safe working practices to be adopted in knitting mill PC8 clean the machine and department before handing over the shift. KB10 importance of cleanliness and safety at work place.
P3 keep work area clean and safe and free from waste and obstructions during production
None
PC5 ensure proper functioning of machine and problems if any should be reported to the supervisor and maintenance in- charge
P4 check that materials, machinery and equipment meet specification
None
KB5 importance of yarn quality P5 monitor materials and equipment against specification during processing
None
KB1 process flow and material flow in knitting industry
P7 organize and carry out tasks to maintain the flow of materials and production
None
KB1 process flow and material flow in knitting industry PC10 meet the next shift operator and give the information regarding the count, GSM, loop length, process, issues faced in quality, and current fabric production followed in the knitting department. PC11 note the production details for the current shift PC12 ensure proper functioning of the machine and problems if any, should be reported to the supervisor and maintenance incharge. PC13 give details to the next
P8 use work methods to meet specification within agreed time schedules
None
7
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps inIndianNOS
shift operator about the current order quality, quantity and balance quantity. PC14 convey information regarding new order fabric details and quantity. KB8 importance of fabric technical details (gsm, loop length etc.) PC11 note the production details for the current shift PC6 understand and be informed about the current order quantity and balance quantity PC11 note the production details for the current shift PC13 give details to the next shift operator about the current order quality, quantity and balance quantity. PC14 convey information regarding new order fabric details and quantity.
P9 meet and maintain productivity levels
None
PC6 understand and be informed about the current order quantity and balance quantity
P10 adjustment the work pattern as required to maintain production targets
None
PC11 note the production details for the current shift
P15 complete and store accurate records and documentation
None
Knowledge and understanding Knowledge and understanding
8
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps inIndianNOS
PC3 meet the previous shift operator and collect the information regarding the count, process, issues faced in quality, current beam production followed in the knitting department. PC4 be updated on information regarding the current order such as it is for which company and other details PC6 understand and be informed about the current order quantity and balance quantity PC7 be updated on the new order fabric details and quantity PC10 meet the next shift operator and give the information regarding the count, GSM, loop length, process, issues faced in quality, and current fabric production followed in the knitting department. PC11 note the production details for the current shift PC13 give details to the next shift operator about the current order quality, quantity and balance quantity. PC14 convey information regarding new order fabric details and quantity. KA2 safe working practices to be adopted in knitting mill KA1 standard operating procedures (SOP) and regulations in a knitting industry
K1 how to receive work instructions and specifications and interpret them accurately
None
KB9 knowledge about type of K2 how to make use of the None
9
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps inIndianNOS
the fabric, machine settings. PC6 understand and be informed about the current order quantity and balance quantity PC4 be updated on information regarding the current order such as it is for which company and other details. PC3 meet the previous shift operator and collect the information regarding the count, process, issues faced in quality, current beam production followed in the knitting department.
information detailed in specifications and instructions
KB5 importance of yarn quality K6 characteristics of materials to be processed and how to handle them
None
KB7 knowledge of different functions in display panel and procedure to operate the knitting machine KB9 knowledge about type of the fabric, machine settings
K7 capabilities of equipment to be used and actions to be taken when it does not conform to specification
None
KB10 importance of cleanliness and safety at work place
K8 importance of maintaining a clean and safe work area
None
KB5 importance of yarn quality KB1 process flow and material flow in knitting industry KB8 importance of fabric technical details (gsm, loop length etc.)
K12 the importance of achieving quality and its relation to the end user / customer
None
KA2 safe working practices to be adopted in knitting mill
K14 safe working practices and organizational procedures
None
KA3 quality systems and other processes practiced in the knitting mill
K21 the companies quality standards
None
10
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Section II:Compares the competencies in Indian NOS with those of UK NOS
NOS Mapping Descriptions
Indian QP Title Knitting Machine Operator – Circular Knitting
UK Qualification Not Specified
Indian QP Code TSC/Q4101 UK Qualification Code Not Specified
Indian NOS Code TSC/N4106 UK NOS Code SKSTEX43
Indian NOS Operate a Flat Knitting machine
UK NOS Control the efficiency of the knitting process (warp and weft)
Scope This unit/task covers the following: Operate the
knitting machine Repair yarn
related faults atthe knitting headand fabric press-offs
Carry outmaintenanceactivities
Material handlingand safety atworkplace
Other tentingresponsibilities
Overview 1. organising andcontrolling the work ofthe knittingdepartment2. ensuring knittedproducts aremanufactured tospecification
11
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Competency Mapping
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps in Indian NOS
PC20rethread incorrectly-positioned yarns in accordance with workplace procedures. PC21 join broken yarns or new ends PC23reset machines for restart after fault correction, style changes, and pattern changes PC41 ensure that machine is always working properly, if any deviations inform superiors immediately PC28 inform the supervisor and maintenance incharge in case of a jam PC39 inform superiors immediately, if any break down or fault in the machine is noticed
P3 ensure materials, machinery and equipment meet specification
None
PC20rethread incorrectly-positioned yarns in accordance with workplace procedures. PC23reset machines for restart after fault correction, style changes, and pattern changes PC41 ensure that machine is always working properly, if any deviations inform superiors immediately PC28 inform the supervisor and maintenance incharge in case of a jam PC39 inform superiors immediately, if any break down or fault in the machine is noticed
P4 identify materials, machinery or equipment that fail to match specification
None
PC41 ensure that machine is always working properly, if any deviations inform superiors immediately PC28 inform the supervisor and maintenance incharge in case of a jam PC39 inform superiors
P5 take appropriate action within your own area of responsibility if materials, machinery or equipment fail to match specification
None
12
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps in Indian NOS
immediately, if any break down or fault in the machine is noticed KB3 importance of flat knitting machine, various parts in a knitting machine and their functions PC20rethread incorrectly-positioned yarns in accordance with workplace procedures. PC23reset machines for restart after fault correction, style changes, and pattern changes PC26 support the fitter for carrying out maintenance activities PC28 inform the supervisor and maintenance incharge in case of a jam KB14 guidelines for carrying out maintenance activities
P6 carry out daily maintenance in accordance with specified procedures
None
PC26 support the fitter for carrying out maintenance activities PC28 inform the supervisor and maintenance incharge in case of a jam KB14 guidelines for carrying out maintenance activities
P7 undertake preventative maintenance within limits of responsibility
None
P8 ensure required machinery parts are available to meet maintenance schedule
P8 ensure required machinery parts are available to meet maintenance schedule
PC18 ensure the working area is clean KB11 importance of cleanliness at work place KB13 guidelines for carrying out cleaning activities PC12 ensure the yarn paths, eyelets, knitting heads, machines, and working environment are clean and free of contamination PC32 the working environment
P10 keep the work area clean and safe in accordance with specified procedure
None
13
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps in Indian NOS
is kept clean and free of contamination PC4 ensure proper functioning of the knitting machine by verifying in the display panel PC11 ensure the machines are lubricated as directed in the machine manual PC16 view the display panel or signal and identify the reasons for machine stoppages if any PC17 ensure the knitting machine is running in the set speed by viewing the display panel PC22 fix fabric press-off PC23 reset machines for restart after fault correction, style changes, and pattern changes PC40 ensure the proper functioning of signal lamps PC42 Identify yarn wastes by fibre content and sorted according to workplace procedures
P11 set and test machinery to produce knitted materials to specification
None
PC8 ensure the machines are monitored for continuous functioning of all systems, and variations notified in accordance with workplace procedures
P14 monitor machinery and equipment during processing to ensure optimum efficiency
None
PC23 reset machines for restart after fault correction, style changes, and pattern changes
P15 plan for style / size changes
None
PC43 Identify fabric wastes and sorted according to workplace procedures PC38 collect usable waste to be weighed at shift end and to be placed in the specified area
P17 keep downtime and wastage to a minimum
None
PC4 ensure proper functioning of knitting machine by verifying in the display panel
P20 ensure specification are met and record sample pieces
None
14
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps in Indian NOS
KB2 understanding the importance of yarn, types of yarn, yarn count, types of fabric, loop length, gsm, importance of yarn and fabric quality PC37 ensure the fabric produced is free from outside damages PC41 ensure that machine is always working properly, if any deviations inform superiors immediately PC28 inform the supervisor and maintenance incharge in case of a jam PC39 inform superiors immediately, if any break down or fault in the machine is noticed
P21 report accurately to appropriate people
None
PC10 ensure the documentation of production is completed in accordance with workplace procedures
P23 keep accurate production records
None
PC10 ensure the documentation of production is completed in accordance with workplace procedures
P27 complete and store accurate records and documentation
None
Knowledge and understanding Knowledge and understanding PC4 ensure proper functioning of the knitting machine by verifying in the display panel PC8 ensure the machines are monitored for continuous functioning of all systems, and variations notified PC11 ensure the machines are lubricated as directed in the machine manual PC12 ensure the yarn paths; eyelets, knitting heads, machine and working environment is clean and free of contamination
K6 preparation activities prior to work operations
None
K10 how to prepare maintenance log schedules and
K10 how to prepare maintenance log schedules and
15
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps in Indian NOS
ensure any spare parts required have been ordered through the appropriate procedure
ensure any spare parts required have been ordered through the appropriate procedure
KB11 importance of cleanliness at work place PC18 ensure the working area is clean PC37 ensure the fabric produced is free from outside damages PC12 ensure the yarn paths; eyelets, knitting heads, machine and working environment is clean and free of contamination
K11 the importance of maintaining a clean and safe work area
None
16
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Section II:Compares the competencies in Indian NOS with those of UK NOS
NOS Mapping Descriptions
Indian QP Title Knitting Machine Operator – Circular Knitting
UK Qualification Not Specified
Indian QP Code TSC/Q4101 UK Qualification Code Not Specified
Indian NOS Code TSC/N4107 UK NOS Code SKSMSP2
Indian NOS Piecing the yarn and doffing the fabric roll in the knitting machine
UK NOS Contribute to achieving product quality
Scope This unit/task covers the following: attending the
machine on yarn breakage
Piecing the yarn Checking the
quality of piecing Carry out doffing
Overview 1. inspecting materials and products during the production process 2. meeting product specifications 3. identifying problems and irregularities 4. finding the cause of faults in materials and products 5. taking appropriate corrective action 6. using quality approved systems and reporting procedures
17
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Competency Mapping
Performance Criteria - Indian NOS
Performance Criteria –UKNOS Gaps in IndianNOS
PC13 verify the quality of piecing done in the yarn PC14 ensure yarn tension in the creeling section is appropriate PC15 ensure proper functioning of the machine
P5 carry out quality checks at agreed intervals and in the approved
None
PC1 identity the machine stoppage by viewing the signal lamps and in display panel PC2 identify the reasons for yarn breakage PC3 ensure minimum time is taken for attending the yarn breakage PC11 ensure minimum time is taken for piecing the yarn
P9 maintain the continuity of production with minimum interruptions
None
PC13 verify the quality of piecing done in the yarn PC14 ensure yarn tension in the creeling section is appropriate KA5 color coding adopted for different counts/products in the knitting mill KB6 importance of fabric quality
P13 maintain the required productivity and quality levels
None
18
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Section II:Compares the competencies in Indian NOS with those of UK NOS
NOS Mapping Descriptions
Indian QP Title Knitting Machine Operator – Circular Knitting
UK Qualification Not Specified
Indian QP Code TSC/Q4101 UK Qualification Code Not Specified
Indian NOS Code TSC/N4108 UK NOS Code SKSTEX8
Indian NOS Repair yarn related faults in Flat Bed knitting
UK NOS perform quality control procedure in the textile industry
Scope attending the yarn-related faults
Overview 1. monitoring quality during production 2. Interpreting specifications and work instructions 3. Planning work to ensure continuity of production 4. examine and pass finished textile products against specification
19
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Competency Mapping
Performance Criteria - Indian NOS
Performance Criteria –UK NOS Gaps in Indian NOS
KA5 color coding adopted for different count/products in the knitting mill
P6 examine products following approved procedures and examination techniques
None
PC1rethread the incorrectly-positioned yarns in accordance with workplace procedure PC2 Identify the reasons for yarn breakage PC3 broken yarn or new ends are joined in accordance with workplace procedures
P8 identify faults and report them in accordance with agreed procedures
None
PC1rethread the incorrectly-positioned yarns in accordance with workplace procedure PC2 Identify the reasons for yarn breakage PC3 broken yarn or new ends are joined in accordance with workplace procedures
P11 take corrective action to return products to required standards
None
PC1rethread the incorrectly-positioned yarns in accordance with workplace procedure PC2 Identify the reasons for yarn breakage PC3 broken yarn or new ends are joined in accordance with workplace procedures
P12 isolate products which do not meet specification
None
PC1rethread the incorrectly-positioned yarns in accordance with workplace procedure PC2 Identify the reasons for yarn breakage PC3 broken yarn or new ends are joined in accordance with workplace procedures
P15 forward rejected products which have not passed inspection in accordance with agreed procedures
None
Knowledge and understanding Knowledge and understanding
KB10 knowledge of different functions in display panel and procedure to operate the knitting machine
K2 how to make use of the information detailed in specifications and instructions
None
20
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria –UK NOS Gaps in Indian NOS
K4 how to check products against specification
K4 how to check products against specification
K5 the inspection processes required for particular products
K5 the inspection processes required for particular products
PC1rethread the incorrectly-positioned yarns in accordance with workplace procedure
K7 characteristics of materials to be inspected
None
K17 how to deal with rejected products
K17 how to deal with rejected products
21
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Section II:Compares the competencies in Indian NOS with those of UK NOS
NOS Mapping Descriptions
Indian QP Title Knitting Machine Operator – Circular Knitting
UK Qualification Not Specified
Indian QP Code TSC/Q4101 UK Qualification Code Not Specified
Indian NOS Code TSC/N9001 UK NOS Code SKSTEX20
Indian NOS Maintain work area tools and machines
UK NOS Maintain machinery and equipment
Scope This unit covers the following:
• maintain the work area, tools and machines
Overview This standard is for those who are responsible for the basic day-to-day maintenance of production machinery and equipment. The job role may involve: 1. carrying out basic machine maintenance 2. identifying faults and problems
22
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Competency Mapping
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps in Indian NOS
PC1. Handle materials, machinery, equipment and tools with care and use them in the correct way
P6 Use tools and materials safely
None
PC5. Maintain tools and equipment
P4 Perform maintenance of machinery and equipment following organizational guidelines
None
PC6. Carry out running maintenance within agreed schedules
P3 Plan maintenance routines to maintain continuity of operations P4 Perform maintenance of machinery and equipment following organizational guidelines
None
PC7. Carry out maintenance and/or cleaning within one’s responsibility
P4Perform maintenance of machinery and equipment following organizational guidelines P10 Diagnose the cause of faults and take corrective action within the limits of your responsibility P11 rectify faults within the limits of own responsibility
None
PC8. Report unsafe equipment and other dangerous occurrences
P13 Report faults outside own responsibility to others for action
None
PC9. Ensure that the correct machine guards are in place
P5 Competently operate machinery to required specification P14 check that machinery and equipment is operating correctly and safely after rectifying faults
None
PC10. Work in a comfortable position with the correct posture
P5 Competently operate machinery to required specification K12 Safe working practices and organizational procedures
None
23
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps in Indian NOS
PC12. Dispose of waste safely in the designated location
P8 Dispose of waste in accordance with approved procedures
None
KA2 safe working practices and organizational standard operating procedures KB1 work instructions and specifications and interpret them accurately
P1 receive work instructions and specifications and interpret them accurately
None
KA2 safe working practices and organizational standard operating procedures KA10 the importance of complying with written instructions KB1 work instructions and specifications and interpret them accurately
P2 make use of the information detailed in specifications and instructions
None
PC1 handle materials, machinery, equipment and tools with care and use them in the correct way PC5 maintain tools and equipment
P6 use tools and materials safely
None
PC12. dispose of waste safely in the designated location
P8 dispose of waste in accordance with approved procedures
None
KB8. Common faults with equipment and the method to rectify KB4. The importance of taking action when problems are identified
P9 identify problems with machinery and equipment using approved fault finding techniques
None
Knowledge and understanding Knowledge and understanding
KA1.Personal hygiene and duty of care
K18 the organizations rules, codes, guidelines and standards K23 statutory responsibilities under Health, Safety and Environmental legislation and regulation
None
24
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps in Indian NOS
KA2. Safe working practices and organizational procedures
K18 the organizations rules, codes, guidelines and standards K23 statutory responsibilities under Health, Safety and Environmental legislation and regulation
None
KA3.Limits of your own responsibility
K13 limits of your own responsibility
None
KA4. Ways of resolving problems within the work area
K14 ways of resolving problems within the work area, and within limits of personal responsibility
None
KA5.The production process and the specific work activities that relate to the whole process
K15 the production process and how your specific work activities relate to the whole process
None
KA6.The importance of effective communication with supervisors
K16 the importance of effective communication with colleagues K17 the lines of communication, authority and reporting procedures
None
KA7. The lines of communication, authority and reporting procedures
K16 the importance of effective communication with colleagues K17 the lines of communication, authority and reporting procedures K18 the organizations rules, codes and guidelines (including timekeeping)
None
KA8. The organization’s rules, codes and guidelines (including timekeeping)
K28 the organizations rules, codes, guidelines and standards (including timekeeping)
None
KA9.The company’s quality standards
K19 the companies quality standards
None
KA10.The importance of complying with written instructions
K21 the importance of complying with written instructions
None
KA11.Equipment operating procedures / supervisor’s instructions
K22 equipment operating procedures/ manufacturers’ instructions
None
25
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps in Indian NOS
KB1. Work instructions and specifications and interpret them accurately
K1 how to receive work instructions and specifications and interpret them accurately K2 how to make use of the information detailed in specifications and instructions
None
KB2. Relation between work role and the overall manufacturing process
K15 the production process and how your specific work activities relate to the whole process
None
KB4. The importance of taking action when problems are identified
K9 action to take when equipment is defective;
None
KB5. Different ways of minimizing waste PC12. dispose of waste safely in the designated location
K12 types of waste and methods for dealing with them;
None
KB8. Common faults with equipment and the method to rectify
K7 how to identify commonly occurring faults in machinery and equipment
None
KB9. Maintenance procedures
K22 safe work practices and organizational procedures K5 routine maintenance procedures and schedules
None
KB11. Safe working practices for cleaning and the method of carrying them out
K12 safe working practices and organizational procedure
None
KA5. the production process and the specific work activities that relate to the whole process
K8 understand related problems with production materials to rectify identified production issues
None
PC1 handle materials, machinery, equipment and tools with care and use them in the correct way PC5 maintain tools and equipment
K9 function of tools and their correct use
None
PC1. Maintain tools and equipment
K10 ways of testing machinery and equipment after maintenance and fault rectification
None
26
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps in Indian NOS
PC2. Carry out running maintenance within agreed schedules PC3. Carry out maintenance and/or cleaning within one’s responsibility PC4. Report unsafe equipment and other dangerous occurrences PC5. Ensure that the correct machine guards are in place
K11 maintenance and fault rectification record keeping systems
None
27
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Section II:Compares the competencies in Indian NOS with those of UK NOS
NOS Mapping Descriptions
Indian QP Title Knitting Machine Operator – Circular Knitting
UK Qualification Not Specified
Indian QP Code TSC/Q4101 UK Qualification Code Not Specified
Indian NOS Code TSC/N9002 UK NOS Code SKSLWDC25
Indian NOS Working in a team UK NOS Maintain effective working relationships
Scope This unit is about working as a team member in the role of processing unit operator in the textile industry. This unit/task covers the following:
• commitment andtrust
• communication
• adaptability
• creative freedom
Overview This standard of for those who work and communicate with others in the workplace. It includes use of appropriate types of communication to keep colleagues informed, understanding lines of reporting and communication, the need to act upon information promptly and understanding how your role and the Responsibilities of others.
28
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Competency Mapping
Performance Criteria - Indian NOS
Performance Criteria –UKNOS Gaps in IndianNOS
PC1. be accountable to the own role in whole process
P1 carry out work instructions from your line manager accurately and promptly P2 follow agreed codes of conduct and behaviour within your organization
None
PC2. perform all roles with full responsibility
P1 carry out work instructions from your line manager accurately and promptly P2 follow agreed codes of conduct and behaviour within your organization
None
PC3. be effective and efficient at workplace
P1 carry out work instructions from your line manager accurately and promptly P2 follow agreed codes of conduct and behaviour within your organization
None
PC4. properly communicate about company policies
P5 share work related information with colleagues and managers as required
None
PC5. report all problems faced during the process
P3 identify misunderstandings and problems and make efforts to resolve these P4 report any breakdown in working relationships that cannot be resolved promptly to the appropriate person P8 identify problems with communication and seek to resolve these promptly
None
PC6.talk politely with other team members and colleagues
P6 use agreed lines of communication with colleagues and managers P7 communicate clearly and accurately in a way that is appropriate to the situation and meets the needs of others
None
PC7. submit daily report of own performance
10 report your progress against work instruction
None
29
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria –UKNOS Gaps in IndianNOS
PC8. adjust in different work situations
P7 communicate clearly and accurately in a way that is appropriate to the situation and meets the needs of others
None
PC9. give due importance to others’ point of view
P3 identify misunderstandings and problems and make effort to resolve these
None
PC10.avoid conflicting situations
P3 identify misunderstandings and problems and make effort to resolve these P4 report any breakdown in working relationships that cannot be resolved promptly to the appropriate person P7 communicate clearly and accurately in a way that is appropriate to the situation and meets the needs of others P9 Keep your line manager informed of matters affecting working practices and the working environment
None
PC11. collaborate with colleagues performing the pre-required and post-required duty of processing unit tender / operator PC6. talk politely with other team members and colleagues
P5 share work related information with colleagues and managers as required
None
Knowledge and understanding Knowledge and understanding PC11 collaborate with colleagues performing the pre-required and post-requireddutyof processing unit operator PC2. perform all roles with full responsibility KA4. reporting to the supervisor or higher authority about any grievances faced PC6. talk politely with other team members and colleagues
K1 describe own role and responsibilities, how you interact with colleagues, line manager and others in the workplace
None
30
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria –UKNOS Gaps in IndianNOS
KA1. Standard operating procedure (SOP) and regulations in a processing unit PC4 Properly communicate about company policies
K2 explain the organization’s rules for conduct at work
None
PC6. talk politely with other team members and colleagues
K3 explain the importance of maintaining effective working relationships
None
KA4 reporting to the supervisor or higher authority about any grievances faced PC5 Report all problems faced during the process
K4 explain the importance of identifying problems with working relationships and how to deal with these
None
KA1. Standard operating procedure (SOP) and regulations in a processing unit PC4 Properly communicate about company policies KA4 reporting to the supervisor or higher authority about any grievances faced
K6 describe the organization’s grievance and disciplinary procedures
None
KA1. Standard operating procedure (SOP) and regulations in a processing unit
K7 explain how to act on instructions given by your line manager
None
KA4. reporting to the supervisor or higher authority about any grievances faced
K8 describe the agreed lines of communication and reporting procedures
None
31
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Section II: Compares the competencies in Indian NOS with those of UK NOS
NOS Mapping Descriptions
Indian QP Title Knitting Machine Operator – Circular Knitting
UK Qualification Not Specified
Indian QP Code TSC/Q4101 UK Qualification Code Not Specified
Indian NOS Code TSC/N9003 UK NOS Code SKSHS1
Indian NOS Maintain health, safety and security at work place
UK NOS Health, safety and security at work
Scope
This unit provides performance criteria, knowledge & understanding and skills & abilities required to comply with health, safety and security requirements at the workplace and covers procedures to prevent, control and minimize risk to self and others. This unit/task covers the following:
• comply with health, safety and security requirements at work
• recognizing the hazards
• planning the safety techniques
• implementing the programs
Overview
The job role may involve: 1. contributing to the safety and security in the workplace 2. taking action in the event of an incident 3. raising the alarm 4. following correct procedures for shut down and evacuation 5. using emergency equipment correctly and safely 6. monitor the workplace for hazards
32
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Competency Mapping
Performance Criteria - Indian NOS
Performance Criteria – UK NOS Gaps in Indian NOS
PC1. comply with health and safety related instructions applicable to the workplace PC3. carry out own activities in line with approved guidelines and procedures PC20. recognise other possible security issues existing in the workplace PC19. identify different kinds of possible hazards (environmental, personal, ergonomic, chemical) of the industry
P1 identify the location and type of accident / incident
None
PC1. comply with health and safety related instructions applicable to the workplace
PC3. carry out own activities in line with approved guidelines and procedures
P2 recognise the sound/s of alarms
None
PC1. comply with health and safety related instructions applicable to the workplace
PC3. carry out own activities in line with approved guidelines and procedures
P3 raise the alarm(s)
None
33
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria – UK NOS Gaps in Indian NOS
PC1. comply with health and safety related instructions applicable to the workplace PC3. carry out own activities in line with approved guidelines and procedures PC16. undertake first aid, fire-fighting and emergency response training, if asked to do so PC17. take action based on instructions in the event of fire, emergencies or accidents PC21. recognise different measures to curb the hazards
P4 take action in the event of fire, emergencies or accidents
None
PC12. monitor the workplace and work processes for potential risks and threat PC21. recognise different measures to curb the hazards PC1. comply with health and safety related instructions applicable to the workplace PC19. identify different kinds of possible hazards (environmental, personal, ergonomic, chemical) of the industry PC3. carry out own activities in line with approved guidelines and procedures
P5 recognise and rectify where possible potential hazards in the workplace
None
PC15. participate in mock drills/ evacuation procedures organized at the workplace PC3. carry out own activities in line with approved guidelines and procedures PC1. comply with health and safety related instructions applicable to the workplace
P6 follow the organisational procedures for shut down and evacuation when required
None
34
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria – UK NOS Gaps in Indian NOS
PC2. use and maintain personal protective equipment such as “ear plug”, “ nose mask “, “ head cap” etc., as per protocol PC3. carry out own activities in line with approved guidelines and procedures PC1. comply with health and safety related instructions applicable to the workplace
P7 use, maintain and replace emergency equipment and protective clothing and equipment
None
PC21. recognise different measures to curb the hazards PC1. comply with health and safety related instructions applicable to the workplace PC3. carry out own activities in line with approved guidelines and procedures PC12. monitor the workplace and work processes for potential risks and threat PC19. identify different kinds of possible hazards (environmental, personal, ergonomic, chemical) of the industry
P8 monitor the workplace for hazards
None
PC12. monitor the workplace and work processes for potential risks and threat PC7. report any service malfunctions that cannot be rectified PC1. comply with health and safety related instructions applicable to the workplace PC3. carry out own activities in line with approved guidelines and procedures
P9 report hazards which cannot be rectified immediately
None
35
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria – UK NOS Gaps in Indian NOS
PC1. use correct lifting and handling procedures PC1. comply with health and safety related instructions applicable to the workplace PC3. carry out own activities in line with approved guidelines and procedures
P10 use correct handling and lifting techniques
None
PC11. seek clarifications, from supervisors or other authorized personnel in case of perceived risks PC20. recognise other possible security issues existing in the workplace PC1. comply with health and safety related instructions applicable to the workplace PC3. carry out own activities in line with approved guidelines and procedures
P11 report any security breaches
None
PC1. comply with health and safety related instructions applicable to the workplace
PC3. carry out own activities in line with approved guidelines and procedures
P12 follow organisational procedure for any loss of property
PC9. safely handle and remove waste
PC1. comply with health and safety related instructions applicable to the workplace
PC3. carry out own activities in line with approved guidelines and procedures
P13 safely handle and move waste and debris
None
36
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria – UK NOS Gaps in Indian NOS
PC8. store materials and equipment in line with organisational requirements PC1. comply with health and safety related instructions applicable to the workplace PC3. carry out own activities in line with approved guidelines and procedures
P14 store materials and equipment in line with manufacturer’s and organisational requirements
None
PC6. identify and correct (if possible) malfunctions in machinery and equipment PC1. comply with health and safety related instructions applicable to the workplace PC3. carry out own activities in line with approved guidelines and procedures
P15 identify and correct (if possible) malfunctions in machinery and equipment
None
PC7. report any service malfunctions that cannot be rectified PC1. comply with health and safety related instructions applicable to the workplace PC3. carry out own activities in line with approved guidelines and procedures
P16 recognise and report any service malfunctions that cannot be rectified
None
37
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria – UK NOS Gaps in Indian NOS
PC14. report hazards and potential risks/ threats to supervisors or other authorized personnel PC1. comply with health and safety related instructions applicable to the workplace PC3. carry out own activities in line with approved guidelines and procedures PC19. identify different kinds of possible hazards (environmental, personal, ergonomic, chemical) of the industry
P17 recognise and report any hazardous substance leaks (contamination, spillages or emissions)
None
KA11. reporting protocol and documentation required PC1. comply with health and safety related instructions applicable to the workplace PC3. carry out own activities in line with approved guidelines and procedures
P18 complete all forms, records, reports and other documentation
None
PC1. comply with health and safety related instructions applicable to the workplace PC3. carry out own activities in line with approved guidelines and procedures
P19 work to legal requirements, standards and regulations, policies, procedures and professional codes
None
38
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria – UK NOS Gaps in Indian NOS
Knowledge and understanding Knowledge and understanding
KA9 layout of the plant and details of emergency exits, escape routes, emergency equipment and assembly points KB5 signage related to health and safety and their meaning KA1standard operating procedures (SOP)and regulations in a textile mill KA2 safe working practices to be adopted in textile mill KA3 quality systems and other processes practiced in the textile mill KA4 health and safety related practices applicable at the workplace
K1 where alarms, emergency exits, escape routes, emergency equipment and assembly points are located
None
KA1 standard operating procedures (SOP)and regulations in a textile mill KA2 safe working practices to be adopted in textile mill KA3 quality systems and other processes practiced in the textile mill KA4 health and safety related practices applicable at the workplace KB5 signage related to health and safety and their meaning
K2 what the alarm sounds like None
39
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria – UK NOS Gaps in Indian NOS
KA5 potential hazards, risks and threats based on nature of operations KA1 standard operating procedures (SOP)and regulations in a textile mill KA2 safe working practices to be adopted in textile mill KA3 quality systems and other processes practiced in the textile mill KA4 health and safety related practices applicable at the workplace KB4 proper disposal system for waste and by-products KB3 identification, handling and storage of hazardous substances
K3 what hazardous substances are used in the workplace
None
KA2 safe working practices to be adopted in textile mill KA1 standard operating procedures (SOP)and regulations in a textile mill KA3 quality systems and other processes practiced in the textile mill KA4 health and safety related practices applicable at the workplace KB4 proper disposal system for waste and by-products KB3 identification, handling and storage of hazardous substances KA5 potential hazards, risks and threats based on nature of operations
K4 methods of making safe or reducing the danger of hazardous substances in the event of an accident
None
40
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria – UK NOS Gaps in Indian NOS
KB3 identification, handling and storage of hazardous substances KA1 standard operating procedures (SOP)and regulations in a textile mill KA2 safe working practices to be adopted in textile mill KA3 quality systems and other processes practiced in the textile mill KA4 health and safety related practices applicable at the workplace KB4 proper disposal system for waste and by-products KB3 identification, handling and storage of hazardous substances KA5 potential hazards, risks and threats based on nature of operations
K5 how to handle and store hazardous substances in line with COSHH (Control of Substances Hazardous to Health)
None
KA10 potential accidents and emergencies and response to these scenarios KA7 potential risks due to own actions and methods to minimize these KA9 layout of the plant and details of emergency exits, escape routes, emergency equipment and assembly points KA1 standard operating procedures (SOP)and regulations in a textile mill KA2 safe working practices to be adopted in textile mill KA3 quality systems and other processes practiced in the textile mill KA4 health and safety related practices applicable at the
K6 what the most likely accidents and emergencies in the workplace are and how to respond to them
None
41
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria – UK NOS Gaps in Indian NOS
workplace KB4
KA12 details of proper disposal system for waste and by-products personnel trained in first aid, fire-fighting and emergency response KA1 standard operating procedures (SOP)and regulations in a textile mill KA2 safe working practices to be adopted in textile mill KA3 quality systems and other processes practiced in the textile mill KA4 health and safety related practices applicable at the workplace KB4 proper disposal system for waste and by-products
K7 who the nominated first aiders are
None
KA1 standard operating procedures (SOP)and regulations in a textile mill KA2 safe working practices to be adopted in textile mill KA3 quality systems and other processes practiced in the textile mill KA4 health and safety related practices applicable at the workplace KB4 proper disposal system for waste and by-products
K8 how to respond to loss of property
42
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria – UK NOS Gaps in Indian NOS
KB1 occupational health and safety risks and methods KB7 ill-effects of alcohol, tobacco and drugs KB6 importance of sound health, hygiene and good habits KA1 standard operating procedures (SOP)and regulations in a textile mill KA2 safe working practices to be adopted in textile mill KA3 quality systems and other processes practiced in the textile mill KA4 health and safety related practices applicable at the workplace KB2 personal protective equipment and method of use KB1 occupational health and safety risks and methods
K9 your responsibility to health, safety and security in the workplace
None
KB4 proper disposal system for waste and by-products KA8 environmental management system related procedures at the workplace KA1 standard operating procedures (SOP)and regulations in a textile mill KA2 safe working practices to be adopted in textile mill KA3 quality systems and other processes practiced in the textile mill KA4 health and safety related practices applicable at the workplace KB3 identification, handling and storage of hazardous substances KB2 personal protective
K10 environmental requirements
None
43
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria – UK NOS Gaps in Indian NOS
equipment and method of use
Section II:Compares the competencies in Indian NOS with those of UK NOS
NOS Mapping Descriptions
Indian QP Title Knitting Machine Operator – Circular Knitting
UK Qualification Not Specified
Indian QP Code TSC/Q4101 UK Qualification Code Not Specified
Indian NOS Code TSC/N9004 UK NOS Code SKSTEX13
Indian NOS Comply with industry and organizational requirements
UK NOS Maintain and improve your work
Scope This unit is about knowing, understanding, and complying with the requirements of the organization and the textile industry.
This unit/task covers the following: • self development • team work • organizational standards • industry standards
Overview This standard is for those who seek to improve the standard of work expected of them, learn new skills, and apply new work methods to work activities. The job role may involve: 1. improving and maintaining work standards 2. identifying opportunities for further training 3. developing learning and skills
44
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Competency Mapping
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps in Indian NOS
PC1. perform own duties effectively
P1 Meet current work responsibilities P2 report difficulties in maintaining work standards to appropriate people promptly P3 seek advice about how to improve performance from appropriate people
None
PC2. take responsibility for own actions
P1 Meet current work responsibilities P2 report difficulties in maintaining work standards to appropriate people promptly P3 seek advice about how to improve performance from appropriate people
None
PC3. be accountable towards the job role and assigned duties
P1 Meet current work responsibilities P2 report difficulties in maintaining work standards to appropriate people promptly P3 seek advice about how to improve performance from appropriate people
None
PC4.take initiative and innovate the existing methods
P5 identify realistic and achievable improvements to your work performance related to product efficiency and quality
None
PC5. focus on self-learning and improvement
P3 seek advice about how to improve performance from appropriate people P4 seek help from others to improve skills P5 identify realistic and achievable improvements to your work performance related to product efficiency and quality P6 learn new skills and work methods to develop knowledge base of the whole department
None
45
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps in Indian NOS
P7 undertake training in a positive and constructive manner P8 undertake relevant training P9 make use of new skills in work activities P10 work with colleagues constructively when learning new skills and work methods P12 seek opportunities for further training
PC5. co-ordinate with all the team members and colleagues
K18 the lines of communication and the importance of effective communication with colleague
None
PC6. communicate politely K18 the lines of communication and the importance of effective communication with colleague
None
PC7. avoid conflicts and miscommunication
K18 the lines of communication and the importance of effective communication with colleague
None
PC8. know the organizational standards PC9. implement them in your performance PC10. motivate others to follow them PC11. know the industry standards PC12. align them with organization standards
K20 the organizations rules, codes and guidelines K21 the companies quality standards
None
Knowledge and understanding Knowledge and understanding
PC13 align them with organization standards PC9 know the organizational standards
K20 the company's rules, codes and guidelines
None
46
TRANSNATIONAL SKILL STANDARDS FOR TEXTILE INDUSTRY
Performance Criteria - Indian NOS
Performance Criteria - UK NOS Gaps in Indian NOS
KA4. reporting to the supervisor or higher authority about any grievances faced
K18 the lines of communication and the importance of effective communication with colleague
None
PC13 align them with organization standards PC9 know the organizational standards
K20 the organizations rules, codes and guidelines None
KB1.Process and material flow in a processing unit
K17 the production processes and how your specific work activities relate to the whole process
None
KB2. Importance of complying with the standards KB3. Guidelines for cleaning the various part of processing unit machine
K13 how department procedures contribute towards overall efficiency and quality K14 the importance of quality and its relation to the end user/ customer
None
47