TRENT DENT PRODUCTS
Catalogue2020 - 21
Contents
2SOLALOY WORLD CLASS
4SOLALOY SUPER 68
Dental amalgam alloys
Composite resins
7SOLAFIL M90
10SOLAFIL N50
SOLAFIL FLOW 13
INTRODUCTION 1
Bonding & Etching16SOLABOND
19SOLAETCH
21ORDER NUMBERS
22TERMS AND CONDITIONS
Appendix
1
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
Introduc�on Trent Dent is ISO cer�fied company based in London
manufacturing and distribu�ng dental restora�ve materials
in over 35 countries across the world. Our company is
focused on enabling dental professionals to deliver the
best possible products and services in dental care industry.
The main target is to enhance service levels constantly by
developing new ideas, techniques and innova�ve solu�ons.
Trent Dent Principles
1. Awareness of the laws and applicable regulatory
requirements
2. Enjoying latest management techniques
3. Observance of preven�ve principles
4. Ensuring customer sa�sfac�on
5. Con�nuous improvement
dental amalgam alloys
DIFFERENT CHOICE
FOR
DIFFERENT OUTCOME
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
2
Product details
dental amalgam alloys
SOLALOY WORLD CLASS dental amalgam capsules and
powders are non-gamma II, Zink Free, spherical and lathe
cut par�cles, dispersed-phase, corrosion-resistant alloy.
Solaloy world class has an excellent marginal adap�on to
allow this restora�ve can be freely and smoothly carved
to occlusion. .
This restora�ve material has very low sta�c creep factor
and high early strength, so strong margins can be
established without breakage and the risk of bulk fractures
is reduced during the first few hours of restora�on. .
Technical data
Ag: 45 Cu: 24 Sn: 31 Zn: 0
Physical proper�es
Par�cle shape
Dimensional changes a�er 24 hr
Mechanical proper�es
Compressive strength a�er 1 hr
Compressive strength a�er 24 hr
Creep
Type & shape of Hg chamber in capsule
Par�cle size
Chemical composi�on (Mass Frac�on %)
Alloy to Hg ra�o
Mixed of spherical & lathe cut par�cles
» 200 Mpa
» 500 Mpa
» 0.01%
99.999% dental grade mercury in pillow
Sieved to 50 micron
» 0.1%
1:1
SOLALOY WORLD CLASS
Powder: 30 g - 250 g Capsule: 50 Caps & 500 Caps
Package
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
3
Composi�on
Se�ng �me
Silver (Ag): 45%- Tin (Sn): 31%- Copper (Cu): 24%- Zinc (Zn): Free-
Ag
Sn
Cu
45%
31%
24%
dental amalgam alloys
Tritura�on �me in amalgamators
Fast version se�ng �me
Standard version se�ng �me
» 2 Minutes
» 5 Minutes
» 7-15 seconds*
Se�ng �me
*Average tritura�on �me is 7-15 seconds, however , this could be varied depending on the make of machine used
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
4
Product details
Technical data
SOLALOY SUPER 68 dental amalgam capsules and
powders are premium amalgam alloy with a long
heritage as standard of excellence. This restora�ve is
es�mated that over years approximately 1,000,000,000
restora�ons have been made using this alloy. Solaloy
super 68 can offer an excellent service for almost
20 years. These lathe cut par�cles alloy are so sized,
shaped and free of contamina�on. Fine-like dust
par�cles, which cause high flow and varia�ons in se�ng
expansion, have been eliminated.
dental amalgam alloys
Physical proper�es
Par�cle shape
Dimensional changes a�er 24 hr
Mechanical proper�es
Compressive strength a�er 1 hr
Compressive strength a�er 24 hr
Creep
Type & shape of Hg chamber in capsule
Par�cle size
Chemical composi�on of amalgam powder (Mass Frac�on %)
Alloy to Hg ra�o
Ag: 68.4 Cu: 4.7 Sn: 26.3 Zn: 0.6
Lathe cut par�cles
Between -0.1% to 2%
» 80 Mpa
» 300 Mpa
» 0.5% to 2%
99.999% dental grade mercury in pillow
Sieved to 75 micron
» 1:1.08
SOLALOY SUPER 68
Powder: 30 g - 250 g Capsule: 50 Caps & 500 Caps
Package
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
5
Composi�on - Silver (Ag): 68.4 %- Tin (Sn): 26.3 %- Copper (Cu): 4.7 %- Zinc (Zn): 0.6 %
Ag
Sn
Cu Zn
68.4%
26.3%
4.7%
0.6%
dental amalgam alloys
Se�ng �meSe�ng �me
Tritura�on �me in amalgamators
se�ng �me » 7.5 Minutes
» 7-15 seconds*
*Average tritura�on �me is 7-15 seconds, however , this could be varied depending on the make of machine used
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
6
Compe��ve advantages
Order numbers
- Ease of condensing with small faced pluggers and a
smooth carving surface
- Excellent marginal adap�on, freely and smoothly carved
to occlusion
- No need to polish, restora�on is enhanced by pre-carving
burnishing
- Posi�ve feather-edged smooth shaving to desired result
- No clogging, agglomera�on or chemistry imbalance
- Use in both high & low speed amalgamators
- Designed for use in posterior tooth area
- Fillings that must stand pressure in the back teeth
(Class I and II)
SOLALOY SUPER 68 POWDERS
50 g100 g250 g500 g
30 gPot
SOLALOY WORLD CLASS CAPSULES
Art.No.
2 Spill
Type
4002002
SOLALOY SUPER 68 CAPSULES
1 Spill2 Spill3 Spill
Type
400500140050024005003
Art.No.
Version1 Spill 4002001
3 Spill 40020031 Spill
3 Spill
400200440020054002006
SOLALOY WORLD CLASS POWDERS
Art.No.Version
2 Spill
50 g100 g250 g500 g
30 g
50 g100 g250 g500 g
30 g 40030064003007400300840030094003010
4003002400300340030044003005
4003001
Pot
40060014006002400600340060044006005
Art.No.
StdStdStdStdStd
FastFastFastFastFast
StdStdStd
FastFast
Fast
dental amalgam alloys
Applica�on
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
composite resins
A LONG LASTING SMILE
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
7
Product details SOLAFIL M90 is a universal light cured micro hybrid
composite, combined of macro & micro fillers with
excellent physical proper�es. Hybrid technology allows
this restora�ve to be ideally suited for making inlays,
onlays and veneers and convenient restora�ons in the
anterior and posterior tooth areas. .
Compe��ve advantages- Pleasing esthe�cs and good adjus�ng of the shade
- Highly smooth, non-s�cky and plaque resistant
- Long-term clinical history and experience
- Highly strong and long las�ng
- High compressive strength
- Low shrinkage percent
- Natural looking result
- Homogenous surface
- High filler loading
composite resins
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
8
Technical data
composite resins
SOLAFIL M90 is available in 16 shades that correspondto the most commonly used shading system:• A1, A2, A3, A3.5, A4• B1, B2, B3, B4• C1, C2, C3, C4• D3• BW, XBW
- Diurethane dimethacrylate (UDMA)Butanediol dimethacrylate (BDMA)- Isopropylidene-bis [2(3)- hydroxy-3(2)- (4-phenoxy)-
propyl] bismethacrylate (Bis-GMA)Total filler: 75% (by weight) inorganic filler (0.04 -3 μm)-
Composi�on
Mechanical proper�es
Compressive strength
Flexural strength
Tensile strength
E-module
Vickers hardness
» 510 Mpa
» 160 Mpa
» 45 Mpa
» 11,170 Mpa
» 780 Mpa
Filler 75% by weight*
* Inorganic filler (0.04 - 3.0 µm)
Syringe: 4 g Capsule: 0.3 g
Package
SOLAFIL M90
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
9
- Designed for use in both anterior and posterior
restora�ons
- Suited for making inlays, onlays and veneers
- Making stumps and extended fissure sealing
- Core & Cusp build-up
Curing �me
Order numbers
Curing �me
Light intensity for curing
Wavelength for curing
Curing �me
2≥ 650 mW/cm
350-500 nm
40 sec
Working �me 2 min
composite resins
Applica�on
Shade30050013005002300500330050043005005300500630050073005008
A1A2A3
A3.5A4B1B2B3
Art.No. Shade30050093005010300501130050123005013300501430050153005016
Art.No.B4C1C2C3C4D3BW
XBW
SOLAFIL M90 SOLAFIL M90
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
10
SOLAFIL N50 is a light nano hybrid composite withcured
great physical proper�es and suitable for both direct and
indirect restora�on of all cavity classes like inlays and
onlays. The key important factor of these composites is
long las�ng fillings use. .
Product details
Compe��ve advantages- Easy to adapt with no s�cky to instrument
- Excellent handling and easy to sculpt
- Op�mized handling and formula
- High compressive strength
- Durability and long-las�ng
- Outstanding polishability
- Time and cost effec�ve
- Performance reliability
- Low shrinkage percent
- Natural looking result
- High filler loading
composite resins
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
11
SOLAFIL N50 is available in 15 shades that correspondto the most commonly used shading system:• A1, A2, A3, A3.5, A4• B1, B2, B3• C2, C3• OD A2, OD B2• W2, W3• ER
- Diurethane dimethacrylate (UDMA)
Butanediol dimethacrylate (BDMA)-
Isopropylidene-bis [2(3)- hydroxy-3(2)- (4-phenoxy)-
propyl] bismethacrylate (Bis-GMA)
Total filler:83.5% (by weight) inorganic filler (28 nm-15 μm)-
Technical data
composite resins
Mechanical proper�es
Compressive strength
Flexural strength
Tensile strength
E-module
Vickers hardness
Filler
» 465 Mpa
» 155 Mpa
» 70 Mpa
» 18,160 Mpa
» 1,090 Mpa
Syringe: 4 g Capsule: 0.3 g
Shrinkage vol » 1.35%
83.5% by weight, 66.5% by volume*
Package
* Inorganic filler (28 nm - 15 µm)
Stability to ambient light 3 minutes
SOLAFIL N50
Composi�on
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
12
- Designed for use in direct and indirect restora�on
- Suitable for making inlays, onlays and veneers
- for all classes Appropriate
- Core & Cusp build-up
Order numbers
composite resins
Curing �me
Applica�on
Curing �me
Wavelength for curing
Curing �me (light polymerisa�on)
350-500 nm
20 sec
Curing �me (chemical curing) 3 sec
Art.No.A1A2A3
A3.5A4B1B2B3
Shade30050173005018300501930050203005021300502230050233005024
3005025300502630050273005028300502930050303005031
C2C3
ER
OD A2
W2W3
OD B2
Art.No.Shade
SOLAFIL N50 SOLAFIL N50
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
13
Product details
Compe��ve advantages
SOLAFIL FLOW is a light flowable compositecured
suitable for direct restora�on and sealing fissures. This
restora�on is appropriate for cavi�es such as I, II, III and
V for tooth areas without chewing func�on and is
Bis-GMA free. Solafil FLOW is highly appropriate to be
used under composite restora�ons. .
- Influence and reach to tough tooth area
- High radiopacity and easy restora�on
- Excellent handling and aesthe�cs
- Excellent polishability and x-ray
- Develop the biocompa�bility
- Durability and long-las�ng
- Highly scrubbing resistant
- Mediocre filler par�cle
- Bis-GMA free
composite resins
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
14
SOLAFIL FLOW is available in 8 shades that correspondto the most commonly used shading system:• A1, A2, A3, A3.5• B1, B2, B3• Clear
- Diurethane dimethacrylate (UDMA)- 1,4-butanediol dimethacrylate (BDMA)- Total filler: 77% by weight (57% by volume) inorganic filler (0.005–40 μm)
Technical data
composite resins
» 435 Mpa
» 150 Mpa
» 12,320 Mpa
» 795 Mpa
» 215% Al
77% by weight, pyrogenic silicic acidFiller
Syringe: 2 g
Radiopacity
Mechanical proper�es
Compressive strength
Flexural strength
E-module
Vickers hardness
Package
SOLAFIL FLOW
Composi�on
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
15
Order numbers
- Suitable for cavi�es such as I, II, III and V classes
- Non -s�cking and non-running , nicely adap�on
- Repair of defec�ve composite restora�ons
- Designed for direct restora�on
- Fissure sealant
composite resins
Curing �me
Applica�on
Light intensity for curing
Wavelength for curing
Curing �me
2≥ 650 mW/cm
350-500 nm
40 sec
Curing �me
Art.No.Shade
B1
A1
A3A3.5
A2
B2B3
CLEAR
30050433005044300504530050463005047300504830050493005050
SOLAFIL FLOW
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
bonding & etching
A SUPERB BONDING
FOR
BRILLIANT RESTORATION
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
16
SOLABOND is a light cured adhesive one step bonding.
This bonding can be used for enamel and den�ne. It can
be used in root canals before fixing pins, filling and for
inlays as a primer. Also it is suitable for composite inlays,
ceramic, crowns as onlays, veneers bridges. .
SPSOLABOND All-in-One is a self etch, single component
light cured adhesive bonding. It is suitable for all bonding
techniques such as total-etch, selec�ve-etch and self-etch.
This is also suitable for composite inlays, ceramic, crown,
as onlays, veneers bridges. .
Product details
Compe��ve advantages- Easy to use and excellent stability
- Highly viscosity and hydrophilic
- Excellent bio adaptability
- Easy Influence to den�n
- Ethanol based
bonding & etching
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
17
- Modified acrylic acid- Polyacrylic acid- Methacrylate- Catalysts - Stabilisators - Ethanol (50-75%)
Technical data
bonding & etching
Bo�le: 5 ml & 7 ml
Stability
Package
Den�n and etched enamel » 35 Mpa
Non precious metals » 30 Mpa
Bo�le: 5 ml & 7 ml
Stability
Package
Den�n and etched enamel » 23 Mpa
Non precious metals » 20 Mpa
SOLABOND
SPSOLABOND
Composi�on
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
18
Order numbers
- Excellent for composite inlays, ceramic as onlays and
veneers
- Desensi�sa�on of sensi�ve cervical areas
- Designed for enamel and den�ne
- Used for root canal as a primer
- Single applica�on
- Repair of fractured composite filling
- Treatment of sensi�ve teeth
- Indirect restora�ons made of composite
bonding & etching
Curing �me
Applica�on
Wavelength for curing
Curing �me (light polymerisa�on)
350-500 nm
20 sec
Curing �me (chemical curing)* 3 sec
* mixing ra�o 1:1 of Solabond and the ac�vator without light and under the exclusion of air
Curing �meCuring �me
Art.No.Bo�le
7 ml30050525 ml3005053
Art.No.Bo�le
7 ml30050545 ml3005055
SOLABOND
SPSOLABOND
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
19
Product details
Compe��ve advantages- Adhesive of inlays, crowns, bridges, veneers, adhesive
bridges and root canal posts
- Easy control by superb contrast to the tooth
- No leakage and excellent consistency
- Balanced handling proper�es
- Dependable bond strength
- Composite restora�ons
- Metallic curved centre
SOLAETCH is a phosphoric acid 37.5% universal etchant
gel and can be used in den�ne and enamel, designed
for maximum etching efficiency. .
bonding & etching
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
20
- Phosphoric acid 37.5% (25-50%)
Technical data
bonding & etching
Order numbers
- Apply for total-etch and non total-etch
- Designed for den�ne and enamel
- Composite restora�ons
Curing �me
Applica�on
30 sec
20 - 30 sec
90 - 120 sec
15sec
Art.No.Syringe
2 ml 3005051
Normal enamel
Immature enamel
Fluoridated teeth, deciduous teeth
Den�n
Curing �me
SOLAETCH
Syringe: 2 ml & 30 ml
Phosphoric acid 37.5% 25-50%
Package
Content
SOLAETCH
Composi�on
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
21Art.No.
50 g100 g250 g
500 g
30 g
4003002400300340030044003005
4003001
TypeDescrip�on
SOLALOY WORLD CLASS (Fast)SOLALOY WORLD CLASS (Fast)SOLALOY WORLD CLASS (Fast)SOLALOY WORLD CLASS (Fast)SOLALOY WORLD CLASS (Fast)
50 g100 g250 g500 g
30 g 40030064003007400300840030094003010
SOLALOY WORLD CLASS (Std)SOLALOY WORLD CLASS (Std)SOLALOY WORLD CLASS (Std)SOLALOY WORLD CLASS (Std)SOLALOY WORLD CLASS (Std)SOLALOY WORLD CLASS (Fast)SOLALOY WORLD CLASS (Fast)SOLALOY WORLD CLASS (Fast)
40020024002001
4002003
2 Spill1 Spill
3 Spill1 Spill
3 Spill2 Spill
400200440020054002006
SOLALOY WORLD CLASS (Std)SOLALOY WORLD CLASS (Std)SOLALOY WORLD CLASS (Std)
SOLALOY SUPER 68 400600140060024006003
50 g30 g
100 g250 g500 g
40060044006005
SOLALOY SUPER 68 SOLALOY SUPER 68 SOLALOY SUPER 68
SOLALOY SUPER 68 1 Spill2 Spill3 Spill
40050014005002400500330050013005002300500330050043005005300500630050073005008
A1A2A3
A3.5A4B1B2B3
SOLAFIL M90SOLAFIL M90SOLAFIL M90SOLAFIL M90SOLAFIL M90SOLAFIL M90SOLAFIL M90SOLAFIL M90
B4C1
30050093005010
SOLAFIL M90SOLAFIL M90
Art.No.TypeDescrip�on
SOLAFIL M90SOLAFIL M90SOLAFIL M90SOLAFIL M90
SOLAFIL M90
C2C3C4D3BW
XBW
300501130050123005013300501430050153005016
A1A2A3
A3.5A4B1B2B3
30050173005018300501930050203005021300502230050233005024
SOLAFIL N50SOLAFIL N50SOLAFIL N50SOLAFIL N50SOLAFIL N50SOLAFIL N50SOLAFIL N50SOLAFIL N50
C2C3
ER
OD A2
W2W3
OD B2
3005025300502630050273005028300502930050303005031
SOLAFIL N50SOLAFIL N50SOLAFIL N50SOLAFIL N50SOLAFIL N50SOLAFIL N50SOLAFIL N50SOLAFIL FLOWSOLAFIL FLOW
B1
A1
A3A3.5
A2
B2B3
CLEAR
30050433005044300504530050463005047300504830050493005050
SOLAFIL FLOWSOLAFIL FLOWSOLAFIL FLOWSOLAFIL FLOWSOLAFIL FLOWSOLAFIL FLOWSOLAETCHSOLABONDSOLABOND
SPSOLABOND
2 ml 30050515 ml7 ml
30050523005053
5 ml7 ml
30050543005055
SPSOLABOND
Order numbers
appendix
SOLALOY SUPER 68 SOLALOY SUPER 68
SOLALOY SUPER 68
SOLAFIL M90
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
22 .
1. DEFINITIONS Word Meaning 'the Seller' Trent Dent Products Ltd 'the Buyer' the person(s), firm or company who purchases the Products from theSeller. 'the Products' any goods agreed in the Order to be supplied to the Buyer by the Seller (including any parts of them). 'the Order' any request bythe Buyer (either wri�en or verbal) for the supply by the Seller of the Products. 'the Contract' any agreement between the Buyer and the Seller forsupply of the Products; incorpora�ng these Condi�ons. .2. REQUIREMENTS, CONDITIONS APPLICABLE AND ORDERS .a) Unless otherwise agreed in wri�ng by the Seller these Condi�ons shall apply to all contracts and shall apply to the exclusion of and shall prevailover all other terms or condi�ons incorporated in, or referred to by the Buyer in, the Order, any confirma�on of order specifica�on or other documentor any nego�a�ons between the Seller and the Buyer (whether wri�en or oral). Any conduct by the Buyer in confirma�on of any transac�on with theseller a�er receipt by the Buyer of these Condi�ons shall cons�tute unqualified acceptance by the Buyer hereof. b) All verbal orders for Products shallbe confirmed in wri�ng by the Buyer to the Seller within 7 days of such order being made. c) Any quota�on given by the Seller shall not cons�tute anoffer for sale or a representa�on that those Products are available for sale. d) The Seller cannot guarantee exact quan��es in respect of any productssupplied and shall be deemed to have fulfilled its obliga�ons under the contract by delivery or manufacture of a quan�ty plus or minus ten (10) percent of the quan�ty specified in the Order and the Buyer shall pay the Contract rate for the actual quan�ty delivered. c) Buyers/suppliers ofdistribu�on services or distributors shall maintain records of the distribu�on of Trent Dent's products to allow traceability and that these records areavailable for inspec�on. .3. DELIVERY DATE Any date men�oned for delivery of the Products is intended to be an es�mate and �me for delivery shall not be deemed to be ofthe essence of the Contract nor made of the essence by no�ce. The Seller shall have no liability for any loss or damage howsoever arising (even ifcaused by the Sellers negligence) from any delay in delivery, nor will any delay en�tle the Buyer to terminate or rescind the Contract. .4. DELIVERY BY INSTALMENTS Where delivery of the Products is to be by instalments each instalment shall be deemed to form a separate Contractand non or late delivery of any instalment shall not affect the balance of any Contract or en�tle the Buyer to terminate or rescind any Contract. .5. NON-DELIVERY The Seller must be no�fied in wri�ng of non-delivery of Products within seven working days of receipt by the Buyer of no�fica�onof dispatch. The Seller shall not be liable for any such non-delivery unless a wri�en no�ce is received by it in accordance with this paragraph 5 (evenif caused by the Seller's negligence) and the Seller's liability for non-delivery shall be limited to replacing the Products within a reasonable �me orissuing a credit note at the pro rata Contract rate against any invoice raised for such Products. .6. REFUSAL OF DELIVERY If for any reason the Buyer fails to, refuses to, or is not able to, accept delivery of the Products, the Products will be deemedto have been delivered and the return carriage and/or storage of the Products will be at the expense and risk of the Buyer without prejudice to anyother rights of the Seller under these Condi�ons or otherwise. .7. PRICE All price quota�ons for Products are calculated using costs applicable at the date of such quota�ons. If there are any increases in such costsbetween the date of the quota�on and the date of dispatch the Seller reserves the right to increase the quoted price accordingly. The price for theProducts shall be exclusive of any valued added tax and all costs and charges in rela�on to delivery, carriage, loading/unloading and insurance (if any)which the Buyer shall pay in addi�on on the due date for payment of the Products. .8. TIME FOR PAYMENT Without prejudice to the provisions of paragraph 15 hereof all sums due to the Seller shall be made without set-off,deduc�on, discount, abatement or otherwise and shall be paid by the Buyer to the Seller by the last day of the month next following the month ofdelivery and �me for payment shall be of the essence of the Contract. In default the Seller may (without prejudice to any rights or remedies it mighthave):- a) Suspend delivery under all or any Contracts with the Buyer; and/or b) Charge the Buyer default interest at a rate of two per cent per annumabove the base rate of HSBC Bank PLC on the sum outstanding; and/or c) Give wri�en no�ce that if any sum remains unpaid for 21 days therea�erthe Seller shall be en�tled to treat any or all Contracts with the Buyer as having been terminated by the Buyer and shall be en�tled to claim damagesfor wrongful repudia�on of such Contracts by the Buyer. The Seller reserves the right to claim interest and compensa�on for debt recovery under theLate Payment of Commercial Debts (Interest) Act 1998. .9. RISK AND PROPERTY a) The risk of damage to or loss of the Products shall pass to the Buyer at the �me of delivery (or deemed delivery). .b) Notwithstanding delivery and the passing of risk in the Products or any other provision in these Condi�ons, �tle to the Products shall not pass tothe Buyer un�l the Seller has received in cash or cleared funds payment in full of: (i) the price of the Products; and (ii) all other sums due from theBuyer to the Seller on any account. c) Un�l such �me �tle in the Products passes to the Buyer: (i) the Buyer shall keep the Products separate fromthose of the Buyer and third par�es and properly stored, protected and insured and iden�fied as the Seller's property; and (ii) the Seller shall been�tled at any �me to require the Buyer to deliver up the Products to the Seller and, if the Buyer fails to do so forthwith, to enter upon the premisesof the Buyer or any third party where the Products are stored and repossess the Products (and the Buyer hereby grants the Seller its agents andemployees an irrevocable licence to enter any such premises at any �me for such purpose). d) The Buyer shall not be en�tled to encumber, pledge orin any way charge by way of security for any indebtedness or otherwise any of the Products which remain the property of the Seller, but if the Buyerdoes so all monies owing by the Buyer to the Seller shall (without prejudice to any other right or remedy of the Seller) forthwith become dueand payable. .10. EXTENSION OF CONTRACT PERIOD In the event of strike, lockout or other industrial dispute, fire, flood, storm, tempest, Act of God, stoppage orsubstan�al interference with transport or substan�al interference with the supply of gas, water or electricity, prohibi�on of import or export,Government decree or requirement whether local or na�onal, riots, wars, act of terrorism or any other con�ngency of any kind whatsoever beyond
appendix
TERMS & CONDITIONS
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
23the control of the Seller causing a shortage of supply of labour, fuel or raw materials or any other things necessarily impeding or interfering with themanufacture, use or delivery or carriage of the Products, the Seller shall be en�tled to: (I) such extension of �me for performance of the Contract bythe Buyer as the Seller shall reasonably require; (ii) terminate the Contract ineach case without liability to the Buyer. .11. DEFECTS a) The Seller warrants that the Products are manufactured with all reasonable care and skill and, where applicable, comply with the standard specifica�ons set out in the Seller's published literature that relates to the Products and/or any wri�en specifica�ons agreed between theSeller and the Buyer at the �me of the Order and that the Products is are of sa�sfactory quality. All descrip�ons and other par�culars supplied by theSeller in catalogues, price lists or other documents issued by the Seller or statements made orally by the Seller or its agents or employees are givenfor informa�on only and will not form part of the Contract. b) The Buyer acknowledges that it is relying on its own exper�se and knowledge and notthat of the Seller in entering into the Contract and the Buyer is solely responsible for sa�sfying himself as to the suitability of the Product for anypar�cular purpose and relies solely on his own skill and judgement and not the Seller's skill and judgement in determining such suitability. c) If anyof the Products shall be found to be defec�ve, the Seller shall not be in breach of any of the warran�es in subparagraph 11(a) above unless: (I)suchdefects are reported by the Buyer in wri�ng to the Seller in the case of apparent defects within fourteen (14) days of delivery and in the case of latentdefects within fourteen (14) days of the date on which those defects could have been reasonably first iden�fied; (ii) the Buyer gives the Seller'srepresenta�ve adequate opportunity to inspect the goods and remove samples for analysis; and (iii) the Buyer has used, kept, maintained or dealtwith the Products properly in accordance with the Seller's instruc�ons and the Buyer has forthwith ceased using the Products. d) Subject tosubparagraph 11(c), if the Products do not conform with the warran�es in subparagraph 11(a) the Seller shall, at its op�on, either repair or replacethe Products (or the defec�ve parts) at the place of delivery or credit the Buyer against its invoice with the price of the defec�ve Products at the prorata Contract rate. e) If the Seller complies with subparagraph 11(d) it shall have no further liability for a breach of the warran�es in subparagraph 11(a) in respect of such Products. .12. INTELLECTUAL PROPERTY No warranty or representa�on is given by the Seller that the Products do not infringe any patents, trademarks,registered designs, design rights or other industrial or intellectual property rights. .13. LIMITATION ON LIABILITY a) Subject to paragraph 11, the following provisions set out the en�re financial liability of the Seller (including anyliability for the acts or omissions of its employees, agents and sub-contractors) to the Buyer in respect of: (i) any breach of these Condi�ons; and (ii)any representa�on, statement or tor�ous act or omission including negligence arising under or in connec�on with the Contract. b) All warran�es,condi�ons and other terms implied by statute or common law (save for the condi�ons implied by sec�on 12 of the Sale of Goods Act 1979) are, tothe fullest extent permi�ed by law, excluded from the Contract. c) Nothing in these Condi�ons excludes or limits the liability of the Seller for death orpersonal injury caused by the Seller's negligence or fraudulent misrepresenta�on. d) Subject to condi�ons 13(b) and 13(c): (i) the Seller's totalliability in contract, tort (including negligence or breach of statutory duty), misrepresenta�on, res�tu�on or otherwise, arising in connec�on with theperformance or contemplated performance of this Contract shall be limited to the Contract price; and (ii) the Seller shall not be liable to the Buyerfor any indirect or consequen�al loss or damage (whether for loss of profit, loss of business, deple�on of goodwill or otherwise), costs, expenses orother claims for consequen�al compensa�on whatsoever (howsoever caused) which arise out of or in connec�on with the Contract. .14. ADVERTISEMENT The Buyer shall not use any Order, Products or the Seller's name for adver�sement or publicity purposes without the Seller'sprior wri�en consent. .15. INSOLVENCY If distress or execu�on is levied on the Buyer's assets or if the Buyer makes or offers to make any arrangements of composi�on withhis creditors or commits any act of bankruptcy or if any pe��on or Receiving Order in Bankruptcy is presented or made against him or where theBuyer is a limited company if a resolu�on or a pe��on to wind up such company's business is passed or presented otherwise than for the purposesof a solvent reconstruc�on or amalgama�on or if a receiver or administrator of the Company's undertaking property or assets or any part thereof isappointed the Seller (without prejudice to any claim or right the Seller might otherwise have) shall have the right forthwith and without any liabilityto the Buyer to determine any Contract immediately by wri�en no�ce and notwithstanding the provisions of paragraph 8 hereof all payments for theProducts shall become due and payable immediately. .16. GENERAL a) Any no�ce to be given under these condi�ons shall be in wri�ng b) No failure or delay by the Seller in exercising any of its rightsunder any Contract shall operate as a waiver of that or any other right under that Contract or any other Contract. c) The rights of the Seller or theBuyer shall nor be prejudiced or restricted by any indulgence or forbearance extended by either party to the other and no waiver by either party inrespect of any breach shall operate as a waiver in respect of any subsequent breach. d) The Buyer may not assign any of its rights or obliga�onsunder the Contract. e) The par�es to the Contract do not intend that any of its terms will be enforceable by any person not a party to it pursuant tothe Contracts (Rights of Third Par�es) Act 1999. f) If any of these Condi�ons shall become or shall be declared by any court of competent jurisdic�onto be illegal, invalid, void, voidable, unreasonable or unenforceable in any way, such provision shall be deemed severable without, as far as possible,modifying any other clause or part of these Condi�ons and this shall not affect any other provisions of these Condi�ons which shall remain in fullforce and effect. g) The paragraph headings are for convenience only and shall not affect the interpreta�on or construc�on of the Contract. .17. ENGLISH LAW The Contract shall be governed and construed in accordance with English law and both par�es shall submit to the exclusivejurisdic�on of the English courts. .
appendix
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
The Leading Dental Exhibition &
Conference in Asia Pacific
24-26 Apr 2020, Singapore Please visit us at IDEM 20 - UK Pavilion
VISIT TRENT DENT AT AEEDC 20, UK PAVILION STAND NO. 3C08
04-06February
2020Dubai
Interna�onalConven�on &
Exhibi�onCentre
Note
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
Note
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
Note
Trent Dent General Catalogue 2020-21Visit www.trentdent.co.ukto view more informa�on
TRENT DENT PRODUCTS LTD. 12 WOODFORD, 4 THURSTAN ST,
C H E L S E A C R E E K , L O N D O N
SW6 2GB, UNITED KINGDOM
: 0044 (20) 3091 6068* : info@trentdent .co.uk
: w w w.t re ntd e nt . co . u kü