Trilogy 45 Q-Mode
Variable Speed technology in Residential Geothermal Applications
Ultra-High Efficiency Geothermal Heat Pump
Overview • Fully Variable
• Inverter compressor • ECM fan motor • Internal loop & hot water pumps
• Q-Mode • Space Cooling • Space Heating • Hot water during cooling • Full-Time hot water
• Internet-connected iGate communicating controls
• iGate Connect – Wi-Fi thermostat • iGate Smart Tank
• vFlow internal variable water flow
Trilogy Q-Mode Variable Speed
– Inverter variable speed compressor – ECM variable speed fan – ECM variable speed internal pumps – So9 start & lowest wa<s
Results – 45 EER/5.1 COP* at part-‐load – Best humidity and temperature control – Capacity modulaJon down to 30%
• 0930 model: 9K – 30K capacity (2.6-‐8.8KW) • 1860 model: 18K – 60K capacity (5.2-‐17.6KW)
– Delivers full capacity across the ENTIRE operaJng range of water temperatures (20 -‐ 120°F EWT) (-‐6.7-‐49°C EWT)
Ground loop, ISO 1325-‐1
Trilogy QE1860 Capacity Cooling Mode
0
10
20
30
40
50
60
70
50 70 90 110
Capa
city (k
btuh
)
Entering Water Temperature (°F)
QE1860 max
QE1860 min
TT49 Full
TT49 Part
Trilogy Capacity
Trilogy QE1860 Capacity Heating Mode
0
10
20
30
40
50
60
70
30 40 50 60
Capa
city (k
btuh
)
Entering Water Temperature (°F)
QE1860 max
QE1860 min
TT49 Full
TT49 Part
Trilogy Capacity
Q-Mode
• Highest efficiencies across all AHRI rating points
• Q-Modes – 4 Modes of operation: – Space Cooling – Space Heating – Hot water while space cooling* – Hot water operation only*
• Free space cooling while heating water.
• Hot water efficiency over 5.0 COP = Savings over 80% in hot water production vs electric water heater
• Patented technology; removes heat from the home during cooling and diverts it back to the heat pump to generate hot water.
Q-Mode
Optimized - efficiency • 45 EER (13.2 COP) ground loop cooling efficiency
• 5.1 COP ground loop heaJng efficiency
• >80% savings with Full Time hot water heaJng
• Free Cooling while simultaneously heaJng water
• >60% savings on loop pumping with vFlow
• Insulated smart hot water tank controlled by Trilogy
ISO 1325-‐1
OpJmized Comfort
• CFM Per Ton 300-‐500
300-‐500
18,000 BTU
60,000 BTU
Air Flow can be adjusted up or down on each end of the capacity and is linear in between.
• Humidity control without overcooling
• Fan speed control means more comfortable delivery temperatures
• So9 start and low operaJng sound levels
• Load matches space condiJoning to structure loss/gain
Homeowner access to system over the internet to program, alerts, away and other senngs
Weekly weather at the thermostat
Dealer access to system over the internet to monitor, configure and diagnose from ANYWHERE
Advanced email alerts BEFORE a problem occurs
Set hot water temperature on thermostat