The Trio Q Data Radios are advanced high speed licensed digital data radios, which provide both Ethernet and serial communications for the most complex and demanding applications in Point-to-Point and Point-to-Multipoint (Multiple Address Radio) Telemetry and remote SCADA systems.
Features such as ChannelShare+™, web-based user configuration, together with powerful remote diagnostics and Network Management, make Trio Q Data Radios the complete licensed radio solution that works with all leading host systems and remote equipment.
Combining both Ethernet and serial connectivity, the Trio Q Data Radios are suitable for use with the latest SCADA technology as well as providing a smooth transition from serial-based infrastructure to IP/Ethernet.
1
Trio QR450
Radio
Frequency Range 400-450MHz (M-Band) or 450-520MHz (H-Band)
Frequency Splits Various Tx/Rx frequency splits - configurable
Channel Selection 3.125kHz channel steps
Channel Spacing 12.5 and 25kHz (software selectable)
Frequency Accuracy ±0.5ppm, -40 to +70°C (-40 to 158°F) ambient
Aging <= 1ppm/annum
Radio Modes Simplex and Half duplex
Configuration Configuration via embedded HTTP, HTTPS web interface & or Telnet/SSH/Serial console
Transmitter
Tx Power 0.05 to 10W (+17 to +40dBm) +/- 0.1dB configurable with over-temperature and high VSWR protection
Modulation Configurable narrow band digitally filtered binary CPM, 4, 8 and 16 level FSK
Tx Keyup Time <1ms
Timeout Timer Configurable 0 to 255 seconds
Tx Spurious <= -37dBm
PTT Control Auto (Data) / RTS line on Data Port
Receiver
AFC Tracking Digital receiver frequency tracking
Mute Configurable digital mute
Connections
Serial Com Port 1/2 1 x DB9 female connector providing 2 x RS-232 3-wire serial ports or 1x RS485 serial port (shared connector).
Serial Interface Speeds From 600bps up to 115,200bps
Serial Com Port Flow Control Configurable hardware / software / 3-wire interface
Serial Com Port DCD Control Configurable DCD operation : activated on RF carrier or from user data output
Ethernet Port 2 x RJ45: 10/100 Mbps (auto-MDIX sensing) compliant with IEEE 802.3
Antenna 1 x TNC female bulkhead
Power 2-pin locking, mating connector supplied
USB port Firmware Upgrade, Configuration & Diagnostics logs (Future release)
LED Display Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs and LAN LEDs
Ethernet
Ethernet Protocols Ethernet/IP (including UDP, TCP, DHCP, ARP, ICMP, STP, IGMP, SNTP & TFPT)
Ethernet Repeating Automatic and Self Learning Peer to Peer repeating
Operating Modes Layer-2 Ethernet Bridge mode / Layer-3 IP Router mode
Ethernet Traffic Filtering Configurable: No Filtering / Unicast Traffic & ARP Only / Unicast Traffic Only / List of approved MAC addresses
Compression Automatic Ethernet data compression
Terminal Server Legacy RS-232 serial support via embedded terminal server (UDP/TCP)
DHCP Modes Auto and Manual
SNMP SNMP V1,V2c, RFC 1213-compliant & radio diagnostics parameters (with traps)
Modbus Gateway Configurable MODBUS/TCP to MODBUS/RTU Gateway
Embedded Ping Tester Internal ping test facility
Specifications continue on the next page
Product Data Sheet Trio QR450Specifications
2
Trio QR450
Modem
RF Channel Data Rate # Region Bandwidth (KHz) Speed (Kbps) RF Sens (1x10E-6 BER)
FCC 12.5 8162432
-116-111-105-97
25 16324864
-114-109-103-96
ACMA/ETSI 12.5 8162432
-113-110-107-100
25 14284256
-114-109-103-96
Dynamic Speed Selection QoS/RSSI based Automatic Speed Selection or Fixed speed mode
Operating Modes Base, remote, repeater or store n’ forward
Channelshare+™ Advanced dynamic supervisory collision avoidance system
Backward Compatibility Backward compatible with Trio E-Series radios
Firmware Local and over-the-air flash-based firmware upgradable patches with support for broadcast updates
Security
Encryption* 256-bit AES
HTML Interface Password Protected HTTP and HTTPS configuration and management interface
Console Interface Password protected Telnet, SSH and Serial console interface
Password Protection Password protected configuration sessions
Diagnostics
Diagnostics Overview • NetworkmanagementanddiagnosticWindowsGUIsoftware• Network-wideoperationfromanyremoteterminal• Nonintrusiveprotocol–runssimultaneouslywiththeapplication• Storageofdataerrorandchanneloccupancystatistics• In-builtErrorRatetestingcapabilities• Diagnosticsparametersavailable
• TransmitterPower• ReceivedSignalStrength• DCSupplyVoltage• ReceivedFrequencyError• RadioTemperature• VSWR
Event Log Internal Event Logging facility
General
Operating Temperature Range -40 to +70°C (-40 to 158°F) ambient
Power Supply 13.8Vdc nominal (10-30Vdc)
Transmit Current 1.6A nominal @ 1W, 2.7A nominal @ 5W, 3.7A nominal @ 10W
Receive Current <330mA nominal @ 13.8Vdc
Housing & Dimensions Rugged die-cast, 115 x 34 x 164mm
Mounting Integrated Mounting Holes or DIN Rail mounting (optional)
Weight 0.5kg (1.1lbs.)
Warranty 3 years on parts and labor
Approvals and Certifications
Europe (ETSI) ETSI EN300113, EN301489, EN60950
FCC FCC PART 15, PART 90
Industry Canada IC RS119, ICES-001
Australia ACMA AS4295-1995 (Data)
Hazardous Locations CSA Class I, Division II, Groups (A,B,C,D) for Hazardous Locations ANSI/UL equivalent)
Product Data Sheet Trio QR450Specifications
3
TBURQR4ab-cccdeef represents the part number matrix
Model Trio Radio QR450
TBURQ Q Data Radios
Code Select: Unit Type
R Simplex/Half Duplex Radio
Code Select: Generic Frequency Band
4 UHF: 400 - 520 MHz Band
Code Select: Sub Band - UHF
L Low Band : 400 to 450MHz
H High Band : 450 to 520MHz
Code Select: Hazardous Area Approvals
H CSA & ATEX Hazardous (Standard)
Code Select: Modulation
E00 ETSI/ACMA Region
F00 FCC Region
Code Select: Encryption (subject to country of use)
E 256-bit AES encryption (standard)
N No encryption
Code Select: Licensed Feature
0L Serial Data Only (Two Serial Ports)
1L Ethernet & Serial (Three Ethernet & two Serial Ports)
Code Select: Power Supply
0 10-30V DC Standard
Example: TBURQR4LH-E00E1L0 specifies: Trio QR450 remote station, 400 to 450MHz, hazardous area approved, modulation for ETSI/ACMA regions, 256 bit Encryption enabled, two Ethernet & two Serial Ports, 10-30V DC power supply
Communications Standards:FCC–FederalCommunicationsCommission(USA)IC–IndustryCanadaETSI–EuropeanTelecommunicationStandardsInstituteACMA–AustralianCommunicationsandMediaAuthority
* Export restrictions may apply. Contact your local representative for more details.
Note: Not all product features are available in every mode of operation.
Note: Some radio models may not be available in your country. Local and regulatory conditions may determine the performance and suitability of the radio in different countries. It is the responsibility of the buyer to ensure the radio model meets the regulatory conditions required. Contact your local Schneider Electric sales office for more details.
6
Product Data Sheet Trio QR450Model Code
The Trio Q Data Radio is an advanced high speed licensed digital data radio which provides both Ethernet and serial communications for the most complex and demanding applications in Point-to-Point and Point-to-Multipoint (Multiple Address Radio) Telemetry and remote SCADA systems.
Features such as ChannelShare+™, web-based user configuration, together with powerful remote diagnostics and Network Management, make Q Data Radios the complete licensed radio solution that works with all leading host systems and remote equipment.
Combining both Ethernet and serial connectivity, the Trio Q Data Radio are suitable for use with the latest SCADA technology as well as providing a smooth transition from serial-based infrastructure to IP/Ethernet.
1
Trio QB450
Radio
Frequency Range 400-450MHz (L-Band) or 450-520MHz (H-Band)
Frequency Splits Various Tx/Rx frequency splits - configurable
Channel Selection 3.125kHz channel steps
Channel Spacing 12.5 and 25kHz (software selectable)
Frequency Accuracy ±0.5ppm, -40 to +70°C (-40 to 158°F) ambient
Aging <= 1ppm/annum
Radio Modes Simplex, Half duplex & Full duplex
Duplexer Optional external duplexer available for single antenna operation
Configuration Configuration via embedded HTTP, HTTPS web interface & or Telnet/SSH/Serial console
Transmitter
Tx Power 0.05 to 10W (+17 to +40dBm) +/- 0.1dB configurable with over-temperature and high VSWR protection
Modulation Configurable narrow band digitally filtered binary CPM, 4, 8 and 16 level FSK
Tx Keyup Time <1ms
Timeout Timer Configurable 0 to 255 seconds
Tx Spurious <= -37dBm
PTT Control Auto (Data)
Receiver
AFC Tracking Digital receiver frequency tracking
Mute Configurable digital mute
Connections
Serial Com Port 1/2 1 x DB9 female connector providing 2 x RS-232 3-wire serial ports or 1x RS485 serial port (shared connector).
Serial Interface Speeds From 600bps up to 115,200bps
Serial Com Port Flow Control Configurable hardware / software / 3-wire interface
Serial Com Port DCD Control Configurable DCD operation : activated on RF carrier or from user data output
Ethernet Port 3 x RJ45: 10/100 Mbps (auto-MDIX sensing) compliant with IEEE 802.3
Antenna 2 x N female bulkhead (seperate Tx and Rx ports - full duplex) or optional 1 x N female bulkhead (single Tx/Rx port - half duplex)
Power (Supply voltage options) 10-pin locking, mating connector supplied or optional (10-30Vdc/36-72Vdc) or 100-250Vac IEC socket
USB port Firmware Upgrade, Configuration & Diagnostics logs (Future release)
LED Display Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs and LAN LEDs
Ethernet
Ethernet Protocols Ethernet/IP (including UDP, TCP, DHCP, ARP, ICMP, STP, IGMP, SNTP & TFPT)
Ethernet Repeating Automatic and Self Learning Peer to Peer repeating
Operating Modes Layer-2 Ethernet Bridge mode / Layer-3 IP Router mode
Ethernet Traffic Filtering Configurable: No Filtering / Unicast Traffic & ARP Only / Unicast Traffic Only / List of approved MAC addresses
Compression Automatic Ethernet data compression
Terminal Server Legacy RS-232 serial support via embedded terminal server (UDP/TCP)
DHCP Modes Auto and Manual
SNMP SNMP V1,V2c, RFC 1213-compliant & radio diagnostics parameters (with traps)
Modbus Gateway Configurable MODBUS/TCP to MODBUS/RTU Gateway
Embedded Ping Tester Internal ping test facility
Specifications continue on the next page
Product Data Sheet Trio QB450Specifications
2
Trio QB450
Modem
RF Channel Data Rate # Region Bandwidth (KHz) Speed (Kbps) RF Sens (1x10E-6 BER)
FCC 12.5 8162432
-116-111-105-97
25 16324864
-114-109-103-96
ACMA/ETSI 12.5 81624 32
-113-110-107-100
25 14284256
-114-109-103-96
Dynamic Speed Selection QoS/RSSI based Automatic Speed Selection or Fixed speed mode
Operating Modes Base, remote, repeater or store n’ forward
Channelshare+™ Advanced dynamic supervisory collision avoidance system
Backward Compatibility Backward compatible with Trio E-Series radios
Firmware Local and over-the-air flash-based firmware upgradable patches with support for broadcast updates
Security
Encryption* 256-bit AES
HTML Interface Password Protected HTTP and HTTPS configuration and management interface
Console Interface Password protected Telnet, SSH and Serial console interface
Password Protection Password protected configuration sessions
Diagnostics
Diagnostics Overview • NetworkmanagementanddiagnosticWindowsGUIsoftware• Network-wideoperationfromanyremoteterminal• Nonintrusiveprotocol–runssimultaneouslywiththeapplication• Storageofdataerrorandchanneloccupancystatistics• In-builtErrorRatetestingcapabilities• Diagnosticsparametersavailable
• TransmitterPower• ReceivedSignalStrength• DCSupplyVoltage• ReceivedFrequencyError• RadioTemperature• VSWR
Event Log Internal Event Logging facility
General
Operating Temperature Range -40 to +70°C (-40 to 158°F) ambient
Internal Fan Internal automatic thermostatically controlled fan
Power Supply 10-30Vdc (nominal) or optional 36-72Vdc or 100-250Vac power supply
Protection mode Full duplex (not protected) or optional half duplex (protected) hardware variants
Transmit Current** 4A nominal @ 1W, 5.1A nominal @ 5W, 6.1A nominal @ 10W
Receive Current** 1A nominal @ 13.8Vdc
Housing & Dimensions 19” 1 RU rack mount, 483 x 45 x 410mm
Weight 5kg (11lbs.)
Warranty 3 years on parts and labor
Approvals and Certifications
Europe (ETSI) ETSI EN300113, EN301489, EN60950
FCC FCC PART 15, PART 90
Industry Canada IC RS119, ICES-001
Australia ACMA AS4295-1995 (Data)
Product Data Sheet Trio QB450Specifications
3
TBURQB4ab-cccdeef represents the part number matrix
Model Trio Radio QB450
TBURQ Q Data Radios
Code Select: Unit Type
B Full Duplex Radio - 19” 1RU
P Half Duplex Protected Radio - 19” 1RU
Code Select: Generic Frequency Band
4 UHF: 400 - 520 MHz Band
Code Select: Sub Band - UHF
L Low Band : 400 to 450MHz
H High Band : 450 to 520MHz
Code Select: Hazardous Area Approvals
N No Approval
Code Select: Modulation
E00 ETSI/ACMA Region
F00 FCC Region
Code Select: Encryption (subject to country of use)
E 256-bit AES encryption (standard)
N No encryption
Code Select: Licensed Feature
0L Serial Data Only (Two Serial Ports)
1L Ethernet & Serial (Three Ethernet & two Serial Ports)
Code Select: Power Supply
0 Redundant 10 - 30V DC Standard
1 Redundant -48V DC
2 Non-Redundant 110/240V AC
3 Redundant 110/240V AC
Example: TBURQB4LN-E00E1L0 specifies: Trio QB450 base station, 400 to 450MHz, modulation for ETSI/ACMA regions, 256 bit Encryption enabled, three Ethernet & two Serial Ports, redundant 10-30V DC power supply.
Communications Standards:FCC–FederalCommunicationsCommission(USA)IC–IndustryCanadaETSI–EuropeanTelecommunicationStandardsInstituteACMA–AustralianCommunicationsandMediaAuthority
* Export restrictions may apply. Contact your local representative for more details.** In high ambient temperature situations, the internal fans may operate, resulting in additional current consumption of upto 2 Amps.
Note: Not all product features are available in every mode of operation.
Note: Some radio models may not be available in your country. Local and regulatory conditions may determine the performance and suitability of the radio in different countries. It is the responsibility of the buyer to ensure the radio model meets the regulatory conditions required. Contact your local Schneider Electric sales office for more details.
6
Product Data Sheet Trio QB450Model Code
1
The Trio Q Data Radio is an advanced high speed licensed digital data radio which provides both Ethernet and serial communications for the most complex and demanding applications in Point-to-Point and Point-to-Multipoint (Multiple Address Radio) Telemetry and remote SCADA systems.
Features such as ChannelShare+™, web-based user configuration, together with powerful remote diagnostics and Network Management, make Q Data Radios the complete licensed radio solution that works with all leading host systems and remote equipment.
Combining both Ethernet and serial connectivity, the Trio Q Data Radio are suitable for use with the latest SCADA technology as well as providing a smooth transition from serial-based infrastructure to IP/Ethernet.
Trio QH450
Radio
Frequency Range 400-450MHz (L-Band) or 450-520MHz (H-Band)
Frequency Splits Various Tx/Rx frequency splits - configurable
Channel Selection 3.125kHz channel steps
Channel Spacing 12.5 and 25kHz (software selectable)
Frequency Accuracy ±0.5ppm, -40 to +70°C (-40 to 158°F) ambient
Aging <= 1ppm/annum
Radio Modes Full duplex
Duplexer Optional external duplexer available for single antenna operation
Configuration Configuration via embedded HTTP, HTTPS web interface & or Telnet/SSH/Serial console
Transmitter
Tx Power 0.05 to 10W (+17 to +40dBm) +/- 0.1dB configurable with over-temperature and high VSWR protection
Modulation Configurable narrow band digitally filtered binary GMSK, 4, 8 and 16 level FSK
Tx Keyup Time <1ms
Timeout Timer Configurable 0 to 255 seconds
Tx Spurious <= -37dBm
PTT Control Auto (Data)
Receiver
AFC Tracking Digital receiver frequency tracking
Mute Configurable digital mute
Connections (for each Base within the Hot Standby configuration)
Serial Data Port 1 x RS232 DB9 female connector providing 2 x RS-232 3-wire serial ports (shared connector). 300-38,400 bps asynchronous
Serial Data Port Flow Control Configurable hardware / software / 3-wire interface
Serial Data Port DCD Control Configurable DCD operation : activated on RF carrier or from user data output
Ethernet Port 3 x RJ45: 10/100 Mbps (auto-MDIX sensing) compliant with IEEE 802.3
Antenna 2 x N female bulkhead (seperate Tx and Rx ports - full duplex) or optional 1 x N female bulkhead (single Tx/Rx port - half duplex)
Power (Supply voltage options) 10-pin locking, mating connector supplied or optional (10-30Vdc/36-72Vdc) or 100-250Vac IEC socket
USB port Firmware Upgrade, Configuration & Diagnostics logs (Future release)
LED Display Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs and LAN LEDs
Ethernet
Ethernet Protocols Ethernet/IP (including UDP, TCP, DHCP, ARP, ICMP, STP, IGMP, SNTP & TFPT)
Ethernet Repeating Automatic and Self Learning Peer to Peer repeating
Operating Modes Layer-2 Ethernet Bridge mode / Layer-3 IP Router mode
Ethernet Traffic Filtering Configurable: No Filtering / Unicast Traffic & ARP Only / Unicast Traffic Only / List of approved MAC addresses
Ethernet Link Monitoring Monitor the Ethernet link between a base unit and up to two remote IP addresses
Compression Automatic Ethernet data compression
Terminal Server Legacy RS-232 serial support via embedded terminal server (UDP/TCP)
DHCP Modes Auto and Manual
SNMP SNMP V1,V2c, RFC 1213-compliant & radio diagnostics parameters (with traps)
Modbus Gateway Configurable MODBUS/TCP to MODBUS/RTU Gateway
Embedded Ping Tester Internal ping test facility
Specifications continue on the next page
Product Data Sheet Trio QH450Specifications
2
Trio QH450
Modem
RF Channel Data Rate # Region Bandwidth (KHz) Speed (Kbps) RF Sens (1x10E-6 BER)
FCC 12.5 8162432
-116-111-105-97
25 16324864
-114-109-103-96
ACMA/ETSI 12.5 81624 32
-113-110-107-100
25 14284256
-114-109-103-96
Dynamic Speed Selection QoS/RSSI based Automatic Speed Selection or Fixed speed mode
Operating Modes Base, remote, repeater or store n’ forward
Channelshare+™ Advanced dynamic supervisory collision avoidance system
Backward Compatibility Backward compatible with Trio E-Series radios
Firmware Local and over-the-air flash-based firmware upgradable patches with support for broadcast updates
Security
Encryption* 256-bit AES
HTML Interface Password Protected HTTP and HTTPS configuration and management interface
Console Interface Password protected Telnet, SSH and Serial console interface
Password Protection Password protected configuration sessions
Hot Standby Controller
Change-over control Manual (forced) / automatic / remote (software driven)
Alarm Monitoring Tx Power Failure / Receiver Failure / Received Signal Frequency Error / Data Corruption / DC Power Supply Fail
Diagnostics
Diagnostics Overview • NetworkmanagementanddiagnosticWindowsGUIsoftware• Network-wideoperationfromanyremoteterminal• Nonintrusiveprotocol–runssimultaneouslywiththeapplication• Storageofdataerrorandchanneloccupancystatistics• In-builtErrorRatetestingcapabilities• Diagnosticsparametersavailable
• TransmitterPower• ReceivedSignalStrength• DCSupplyVoltage• ReceivedFrequencyError• RadioTemperature• VSWR
Event Log Internal Event Logging facility
General
Operating Temperature Range -40 to +70°C (-40 to 158°F) ambient
Internal Fan Internal automatic thermostatically controlled fan
Power Supply 10-30Vdc or optional 36-72Vdc or 100-250Vac power supply
Protection mode Full duplex (not protected) or optional half duplex (protected) hardware variants
Housing & Dimensions Hot Standby is configured using 2 x QB450 (19” 1 RU each) plus 1 x Hot Standby Controller (19” 1 RU each) for a total of 19” 3RU’s (424.3 x 132 x 436.5mm )
Weight 15kg (33Ibs) excluding optional duplexer
Warranty 3 years on parts and labor
Approvals and Certifications
Europe (ETSI) ETSI EN300113, EN301489, EN60950
FCC FCC PART 15, PART 90
Industry Canada IC RS119, ICES-001
Australia ACMA AS4295-1995 (Data)
Product Data Sheet Trio QH450Specifications
3
Model Trio Radio QH450
TBURQ Q Data Radios
Code Select: Unit Type
H Full Duplex Hot Standby Kit (with controller) - 19 “ 3RUComprised of 2 x QB + Controller
Code Select: Generic Frequency Band
4 UHF: 400 - 520 MHz Band
Code Select: Sub Band - UHF
L Low Band : 400 to 450MHz
H High Band : 450 to 520MHz
Code Select: Hazardous Area Approvals
N No Approval
Code Select: Modulation
E00 ETSI/ACMA Region
F00 FCC Region
Code Select: Encryption (subject to country of use)
E 256-bit AES encryption (standard)
N No encryption
Code Select: Licensed Feature
1L Ethernet & Serial (Three Ethernet & two Serial Ports)
Code Select: Power Supply
0 10 - 30V DC Standard
1 -48V DC
2 Single 110/240V AC
Code Select: Hot Standby Controller Options
A Common Tx/Rx Antenna
B Duplicated Tx/Rx Antennas
Note: Refer to the next page for further details on the Hot Standby Controller Options.
6
Product Data Sheet Trio QH450Model Code
TBURQH4ab-cccdeef represents the part number matrix
TBURQH4xx-xxxxxxxA • 2 x TBURQB4xx-xxxxxxx • 1 x TBURQHHSC-00A
TBURQH4xx-xxxxxxxB • 2 x TBURQB4xx-xxxxxxx • 1 x TBURQHHSC-00B
QB450
QB450
QB450
QB450
QHHSC Hot Standby Controller Option
A
B
LNA (Low Noise Receiver Amplifier / Splitter) RELAY (Coaxial Transmitter Switch) EXTERNAL DUPLEXER
Kit Con�gurationTx
Rx
QH450 - Hot Standby Controller Kit Configurations
16.69” (424mm)
18.87” (479.3mm)
15” (
381m
m)
5.19
” (13
2mm
)
16.7
” (42
4mm
)
15.9
1” (4
04.3
mm
)
ETH1 ETH2 ETH3COM 1/2
BA Auto
Select
QB450 USB
Factory Default
ETH1 ETH2 ETH3AUX
Pwr
Tx
COM1Rxd
Txd
Com2Rxd
Txd
ErrorNo
Yes
Sync
NoRx
< Green
< Red
QHHSC
15.9
1” (4
04.3
mm
)
16.7
” (42
4.3m
m)
17.18” (436.5mm)
Base A
COM 1/2
QB450 USB
Factory Default
ETH1 ETH2 ETH3AUX
Pwr
Tx
COM1Rxd
Txd
Com2Rxd
Txd
ErrorNo
Yes
Sync
NoRx
< Green
< Red
COM 1/2
COM 1/2 ETH1AUXBase B
COM 1/2 ETH1AUX
6
Product Data Sheet Trio QH450Dimensions and Options
© 2
013
Schn
eide
r Ele
ctric
. All
right
s re
serv
ed -
Febr
uary
201
4
Telemetry & Remote SCADA Solutions | www.schneider-electric.com Document Number TBULMxxxxxx-xx
QH450 - Hot Standby Full Duplex Radio - Dimensions
QHHSC - Option Descriptions
Description Antenna Type
A LNA (Rx) & RF Relay (Tx) Fitted
Common Tx/Rx Antenna
B Duplicated Tx/Rx Ports
Duplicated Tx/Rx Antennas
#Note–TheQH450isafullduplexradioplatformandmust be deployed with suitable band pass duplexer or external filters. Internal Duplexers are not available. Suitable duplexers include TBURDUPLXBP4XXCOA. For information regarding external duplexers, contact your local sales office.
The Trio Q Data Radio is an advanced high speed licensed digital data radio which provides both Ethernet and serial communications for the most complex and demanding applications in Point-to-Point and Point-to-Multipoint (Multiple Address Radio) Telemetry and remote SCADA systems.
Features such as ChannelShare+™, web-based user configuration, together with powerful remote diagnostics and Network Management, make Q Data Radios the complete licensed radio solution that works with all leading host systems and remote equipment.
Combining both Ethernet and serial connectivity, the Trio Q Data Radio are suitable for use with the latest SCADA technology as well as providing a smooth transition from serial-based infrastructure to IP/Ethernet.
1
Trio QP450
Radio
Frequency Range 400-450MHz (L-Band) or 450-520MHz (H-Band)
Frequency Splits Various Tx/Rx frequency splits - configurable
Channel Selection 3.125kHz channel steps
Channel Spacing 12.5 and 25kHz (software selectable)
Frequency Accuracy ±0.5ppm, -40 to +70°C (-40 to 158°F) ambient
Aging <= 1ppm/annum
Radio Modes Simplex or Half duplex
Configuration Configuration via embedded HTTP, HTTPS web interface & or Telnet/SSH/Serial console
Transmitter
Tx Power 0.05 to 10W (+17 to +40dBm) +/- 0.1dB configurable with over-temperature and high VSWR protection
Modulation Configurable narrow band digitally filtered binary CPM, 4, 8 and 16 level FSK
Tx Keyup Time <1ms
Timeout Timer Configurable 0 to 255 seconds
Tx Spurious <= -37dBm
PTT Control Auto (Data)
Receiver
AFC Tracking Digital receiver frequency tracking
Mute Configurable digital mute
Connections
Serial Com Port 1/2 1 x DB9 female connector providing 2 x RS-232 3-wire serial ports or 1x RS485 serial port (shared connector).
Serial Interface Speeds From 600bps up to 115,200bps
Serial Com Port Flow Control Configurable hardware / software / 3-wire interface
Serial Com Port DCD Control Configurable DCD operation : activated on RF carrier or from user data output
Ethernet Port 3 x RJ45: 10/100 Mbps (auto-MDIX sensing) compliant with IEEE 802.3
Antenna Optional: (See diagram at end of datasheet for detailed information) - 2 x N female bulkhead (Refer Option B) - 2 x N female bulkhead (Refer Option D) - 1 x N female bulkhead (Refer Option E)
Power (Supply voltage options) 10-pin locking, mating connector supplied or optional (10-30Vdc/-48Vdc) or 100-250Vac IEC socket
USB port Firmware Upgrade, Configuration & Diagnostics logs (Future release)
LED Display Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs and LAN LEDs
Ethernet
Ethernet Protocols Ethernet/IP (including UDP, TCP, DHCP, ARP, ICMP, STP, IGMP, SNTP & TFPT)
Ethernet Repeating Automatic and Self Learning Peer to Peer repeating
Operating Modes Layer-2 Ethernet Bridge mode / Layer-3 IP Router mode
Ethernet Traffic Filtering Configurable: No Filtering / Unicast Traffic & ARP Only / Unicast Traffic Only / List of approved MAC addresses
Compression Automatic Ethernet data compression
Terminal Server Legacy RS-232 serial support via embedded terminal server (UDP/TCP)
DHCP Modes Auto and Manual
SNMP SNMP V1,V2c, RFC 1213-compliant & radio diagnostics parameters (with traps)
Modbus Gateway Configurable MODBUS/TCP to MODBUS/RTU Gateway
Embedded Ping Tester Internal ping test facility
Specifications continue on the next page
Product Data Sheet Trio QP450Specifications
2
Trio QB450
Modem
RF Channel Data Rate # Region Bandwidth (KHz) Speed (Kbps) RF Sens (1x10E-6 BER)
FCC 12.5 8162432
-116-111-105-97
25 16324864
-114-109-103-96
ACMA/ETSI 12.5 81624 32
-113-110-107-100
25 14284256
-114-109-103-96
Dynamic Speed Selection QoS/RSSI based Automatic Speed Selection or Fixed speed mode
Operating Modes Base, remote, repeater or store n’ forward
Collision Avoidance Channelshare+™ - Advanced dynamic supervisory collision avoidance systemCarrier Sense - Carrier sense based collision avoidance system
Backward Compatibility Backward compatible with Trio E-Series radios
Firmware Local and over-the-air flash-based firmware upgradable patches with support for broadcast updates
Security
Encryption* 256-bit AES
HTML Interface Password Protected HTTP and HTTPS configuration and management interface
Console Interface Password protected Telnet, SSH and Serial console interface
Password Protection Password protected configuration sessions
Diagnostics
Diagnostics Overview • NetworkmanagementanddiagnosticWindowsGUIsoftware• Network-wideoperationfromanyremoteterminal• Nonintrusiveprotocol–runssimultaneouslywiththeapplication• Storageofdataerrorandchanneloccupancystatistics• In-builtErrorRatetestingcapabilities• Diagnosticsparametersavailable
• TransmitterPower• ReceivedSignalStrength• DCSupplyVoltage• ReceivedFrequencyError• RadioTemperature• VSWR
Event Log Internal Event Logging facility
General
Operating Temperature Range -40 to +70°C (-40 to 158°F) ambient
Internal Fan Internal automatic thermostatically controlled fan
Power Supply 10-30Vdc (nominal) or, for option B hardware, optional -48Vdc or 100-250Vac power supply
Protection mode Half duplex - Automatic or manual changeover between internal modules
Transmit Current** 4A nominal @ 1W, 5.1A nominal @ 5W, 6.1A nominal @ 10W
Receive Current** 1A nominal @ 13.8Vdc
Housing & Dimensions 19” 1 RU rack mount, 483 x 45 x 410mm
Weight 5kg (11lbs.)
Warranty 3 years on parts and labor
Approvals and Certifications
Europe (ETSI) ETSI EN300113, EN301489, EN60950
FCC FCC PART 15, PART 90
Industry Canada IC RS119, ICES-001
Australia ACMA AS4295-1995 (Data)
Product Data Sheet Trio QP450Specifications
3
TBURQP4ab-cccdeef represents the part number matrix
Model Trio Radio QB450
TBURQ Q Data Radios
Code Select: Unit Type
P Half Duplex Protected Radio - 19” 1RU
Code Select: Generic Frequency Band
4 UHF: 400 - 520 MHz Band
Code Select: Sub Band - UHF
L Low Band : 400 to 450MHz
H High Band : 450 to 520MHz
Code Select: Hazardous Area Approvals
N No Approval
Code Select: Modulation
E00 ETSI/ACMA Region
F00 FCC Region
Code Select: Encryption (subject to country of use)
E 256-bit AES encryption (standard)
N No encryption
Code Select: Licensed Feature
1L Ethernet & Serial (Three Ethernet & two Serial Ports)
Code Select: Power Supply
0 10 - 30V DC Standard
1 -48V DC (Option B Only)
3 Dual 110/240V AC (Option B Only)
Code Select: Hot Standby Options
B Duplicated Tx/Rx Ports
D Separate switched Tx & Rx Ports
E Common switched Tx/Rx Port
Example: TPURQB4LN-E00E1L0B specifies: Trio QP450 Redundant half duplex radio, 400 to 450MHz, modulation for ETSI/ACMA regions, 256 bit Encryption enabled, three Ethernet & two Serial Ports, 10-30V DC power supply, Duplicated Tx/Rx Ports.
Communications Standards:FCC–FederalCommunicationsCommission(USA)IC–IndustryCanadaETSI–EuropeanTelecommunicationStandardsInstituteACMA–AustralianCommunicationsandMediaAuthority
* Export restrictions may apply. Contact your local representative for more details.** In high ambient temperature situations, the internal fans may operate, resulting in additional current consumption of upto 2 Amps.
Note: Not all product features are available in every mode of operation.
Note: Some radio models may not be available in your country. Local and regulatory conditions may determine the performance and suitability of the radio in different countries. It is the responsibility of the buyer to ensure the radio model meets the regulatory conditions required. Contact your local Schneider Electric sales office for more details.
6
Product Data Sheet Trio QP450Model Code
Hot Standby Options
B
D
E
RELAY (Coaxial Transmitter Switch)
Tx/Rx
Tx/Rx
QP450
QP450Tx/Rx
Tx
Rx
QP450
QP450 - Hot Standby Half Duplex Options
6
© 2
013
Schn
eide
r Ele
ctric
. All
right
s re
serv
ed -
Febr
uary
201
4
Telemetry & Remote SCADA Solutions | www.schneider-electric.com Document Number TBULMxxxxxx-xx
QP450 - Hot Standby Half Duplex Radio - Dimensions
QP450 Hot Standby Option Descriptions
Description Antenna Type
B Duplicated Tx/Rx Ports Duplicated Tx/Rx Antennas
D Separate Switched Tx & Rx Ports
Separate Tx & Rx Antennas
E Common Switched Tx/Rx Port
Common Tx/Rx Antenna
Product Data Sheet Trio QP450Model Code