Download - TSE TSE-NVG-AE · • The TSE Phantom III (I²) Night Vision Scope was designed specifically for tactical surveillance and reconnaissance work. • The Phantom III uses the same Gen

•  The TSE Phantom III (I²) Night Vision Scope was designed specifically for tactical surveillance and reconnaissance work.

•  The Phantom III uses the same Gen III intensifier tube as the PVS-14, with a housing machined out of billet aluminum.

•  The objective lens is standard C-Mount, allowing the user to easily change out lenses to meet mission requirements.

•  The Phantom III includes a 37mm threaded camera adapter allows easy attachment of virtually any camcorder or point & shoot camera while also allowing back focus adjustment.

•  The optional 37mm Relay Lens allows any C or CS mount camera to be used with the Phantom III.

•  This rugged scope is water resistant and operates about 40 hours on two AA batteries.

Phantom III Night Vision Scope

•  Gen III Omni IV •  Operates on two AA batteries •  Water & corrosion resistant

•  Extremely durable •  Supports all C-mount lenses •  Exportable Versions Available

TSE-NVG-AE TSE Tactical Support Equipment www.tserecon.com

Features

GS-03F-0035S

For more information, contact [email protected]

Tactical Support Equipment Phone: 800.889.4030 4039 Barefoot Road Phone: 910.425.3360 Fayetteville, NC 28306 Secure: 910.426.3369 www.tserecon.com Fax: 910.425.3361 Specifications subject to change without notice, the information in this document does not form part of any contract or quote.

Part #: TSE-NVG-AE

•  All C Mount Manual Surveillance Lenses •  DSLR Lenses With C Mount Adapters •  All Commercial Catadioptric (mirror) Lenses (w/ custom adapters) •  All Custom Catadioptric (mirror) Lenses (w/ custom adapters) •  All Commercial & Military Spotting Scopes •  Numerous Commercial Digital Cameras •  Numerous Commercial Camcorders

Specifications

•  Size: 1.75”W x 2.77H” x 5.15”D •  Weight: 15.5 Oz •  Supply Voltage: 3 VDC •  Battery Life: 40 Hours Typical •  Operating Temperatures: -10 to +50 C •  Composition: Black Anodized Aluminum •  Gain Adjustment: Automatic With Bright Source Protection •  Intensified Tube: Gen III Omni IV •  Resolution: 64 Lines Per Millimeter •  Intensified Tube Life: 10,000 Hours Typical •  Diopter Adjustment: -6 to +2 Diopter •  Eye Relief: 25mm (min.) •  Front Lens: 25mm F1.4 Macro •  F-Stop Range: F1.4 to F16 •  Rear Lens Mount: Supports all C-mount Lenses •  Field Of View: 40º •  Mount: 20 x ¼ Tripod Mount •  Basic Kit: Phantom III Scope, Rubber Eyecup, 25mm C Mount Lens, 37mm Adapter, Lens Cap

Equipment & Lens Compatibility

Available on GSA Schedule GS-03F-0035S For more information, contact [email protected]

910-425-3360

Mechanical

•  (Left) 37mm Adapter) Part # TSE-ADP-37MM

•  (Right) Optional CCD Adapter Part # TSE-ADP-CCD

Phantom Scope with Digital Camera and spotting Scope

Phantom Scope with CCD Camera and 200mm Lens