Easy switches with two position teachable option
JC101
• Combine Teachable Switches for
Sensing up to 4 Positions
SERIES JC1 SWITCHESJC1
Teachable2 Position
Standard Single Position
• Unique housingfor easy slot insertion
drop-in
�(800) 624-8511
www.phdinc.com/switches JC101
© Copyright �009, by PHD, Inc. All Rights Reserved. Printed in the U.S.A.
ORDERING DATA: SERIES JC1 SWITCHES
INDEX:Ordering Data Page �
Benefits Page 3
Dimensions and Engineering Data Pages 4 and 6
Programming Guide Page 5
Applications Page 7
TO ORDER SPECIFY:Product, Series, Design No.,Options, Type, Circuit Type, andCable Options.
TYPED - DC Single PositionT - DC 2 Position Teachable
DESIGN NO.
SC P1
OPTIONSS - Solid State
2
PRODUCTJ - Switches
J
SERIESC - C-Slot Mounting
T
CIRCUIT TYPEN - NPNP - PNP
(DC 2 positionteachable available in
PNP only)
-
CABLE OPTIONSK - Quick Connect2 - 2 Meter Cable (Available on JC1STP only)5 - 5 Meter Cable (Not available on JC1STP)
NEw PHD SwItcH no direct substitute*†no direct substitute*†
JC1SDN-5JC1SDN-5JC1SDP-5JC1SDP-5
no direct substitute*†JC1SDN-KJC1SDP-K
still available
currENt 6790 SwItcH6790�-1-0�6790�-1-0567903-1-0�67903-1-0567904-1-0�67904-1-05
679��-1679�3-1679�4-1679�9-�
DEScrIPtIONPNP or NPN DC Reed, � meter CablePNP or NPN DC Reed, 5 meter CableNPN DC Solid State, � meter CableNPN DC Solid State, 5 meter CablePNP DC Solid State, � meter CablePNP DC Solid State, 5 meter Cable
PNP or NPN DC Reed, Quick ConnectNPN DC Solid State, Quick ConnectPNP DC Solid State, Quick Connect
AC Reed, Quick Connect
SwItcH crOSS rEfErENcE cHArt
*Consider Solid State to replace DC Reed.† CAUTION: If used for 6790�-1-xx or 679��-1 Switch replacement, power connection (brown and
blue leads) may need to be reversed to match connection diagram on page 6.
3(800) 624-8511
www.phdinc.com/switchesJC101
SERIES JC1 SWITCHES
Common Benefits for Both Styles• Fits into 4mm switch slot
• IP67 Environmental Protection
• LED indicator for convenient setting and troubleshooting
• Integrated protection circuitry including short circuit protection
• Polyurethane (PUR) jacketed cable
• Available in solid state sensing only for longest life and most reliable operation
• Improved switch hysteresis and magnetic response uniformity
• Quick connect available
Both switches have a unique housing design which allows “drop-in” installation from the side, does not have to be inserted from the end of the slot
recommended PHD Products use• GrIPPErS: Series GRK, EGRK, GRB, GRF (JC1SD only), & GRS (JC1SD only)• rOtArY ACtuAtOrS: Series RI, RCC• SLIDES: Series SFP, SFM, SHP, STP, SIP, SMx, & SxL, SxH• CYLINDErS: Series CRS & CTS
teachable Series JC1 Switches
• Teachable switches feature two programmable outputs. Switch is simply mounted in a convenient location, such as middle of travel, then actuator is placed in first desired position and first output is set. Then actuator is placed in second desired position and second output is set. Outputs retain settings even after power interruption.
• Since each switch provides two outputs, an actuator with only two slots may have up to four outputs by using two switches.
• Offered in 1� – 30 VDC current sourcing (PNP) version only
• Available in cabled (� meter) or quick connect versions.
Standard Series JC1 Switches• Available in cabled (5 meter) or quick connect versions
• Available in solid state sensing only for longest life and most reliable operation
• Offered in 10 – 30 VDC current sinking (NPN) and current sourcing (PNP) versions for simple interfacing to system controllers.
• Replaces PHD Series 6790 Switches (excluding AC applications) See chart on page �.
TEACHABLE
STANDARD
Use two position teachable switches for:
• Reduced cabling • Simplified setup,
• More sensing positions
Standard JC1 Switches
can be used on manyPHD Standard
Actuators
tilt switchto drop in, thenrotate logo up.
4(800) 624-8511
www.phdinc.com/switches JC101
This switch provides the ability to identify two separately programmable positions with a single switch. Programmable capability means no “fine-tuning.” With switch properly aligned, just place actuator in desired positions and program. Solid-state sensing technology provides a highly reliable switch. Elliptical housing allows for easy “drop-in” installation from the side, and does not have to be inserted from the end of the slot. LED indicators on module for positioning and programming. Available with � meter cable or 8 mm threaded Quick Connect.
JC1STP-�
JC1STP-K 81�84-1-001
DIMENSIONS: SERIES JC1ST TEACHABLE SWITCHES
ENGINEERING DATA: SERIES JC1ST TEACHABLE SWITCHES
TEACHABLESErIES JC1St twO POSItION tEACHABLE MAGNEtIC SwItCH
JC1STP-2
JC1STP-K (Quick Connect) 81284-1-001 CORDSET
SPECIFICATIONS JC1STP-xOPERATING PRINCIPLE Programmable Magnetic
Field CharacterizationINPUT VOLTAGE 12 - 30 VDCNUMBER & TYPE OF OUTPUTS Two PNP (source),
separately adjustableOUTPUT CURRENT 100 mA max.,
Short Circuit ProtectionVOLTAGE DROP � 2.2 VDCSWITCH BURDEN � 15 mAENVIRONMENTAL IP67OPERATING TEMP. -20�C to 75�CTYP. DETECTION AREA 0-50 mm
PART NO.JC1STP-2JC1STP-K
SWITCH DESCRIPTIONPNP (Source), Solid State, 12-30 VDC, 2 meter cablePNP (Source), Solid State, 12-30 VDC, Quick Connect
MATCHING CORDSETPART NO.
81284-1-001DESCRIPTION
M8, 4 pin, Straight Female Connector, 5 meter cable
M8 x 1
� .394[10]
1.200[30.5]
M8 x 1
PIN 1WIRE
COLORBROWN
PIN 2WIRECOLORWHITE
PIN 3WIRECOLORBLUE
PIN 4WIRECOLORBLACK
.150[3.8]
.113[2.87]
.768[19.5]
3.750[95.25]
1.181[30]
.177[4.5] .256
[6.5]
.020[0.5]
FOR SWITCH DIMENSIONSSEE ABOVE
19.125[485.78]
FOR TEACH MODULEDIMENSIONS SEE ABOVE
1.349[34.3]
DETECTION AREA
JC1STP-2
JC1STP-K (Quick Connect) 81284-1-001 CORDSET
SPECIFICATIONS JC1STP-xOPERATING PRINCIPLE Programmable Magnetic
Field CharacterizationINPUT VOLTAGE 12 - 30 VDCNUMBER & TYPE OF OUTPUTS Two PNP (source),
separately adjustableOUTPUT CURRENT 100 mA max.,
Short Circuit ProtectionVOLTAGE DROP � 2.2 VDCSWITCH BURDEN � 15 mAENVIRONMENTAL IP67OPERATING TEMP. -20�C to 75�CTYP. DETECTION AREA 0-50 mm
PART NO.JC1STP-2JC1STP-K
SWITCH DESCRIPTIONPNP (Source), Solid State, 12-30 VDC, 2 meter cablePNP (Source), Solid State, 12-30 VDC, Quick Connect
MATCHING CORDSETPART NO.
81284-1-001DESCRIPTION
M8, 4 pin, Straight Female Connector, 5 meter cable
M8 x 1
� .394[10]
1.200[30.5]
M8 x 1
PIN 1WIRE
COLORBROWN
PIN 2WIRECOLORWHITE
PIN 3WIRECOLORBLUE
PIN 4WIRECOLORBLACK
.150[3.8]
.113[2.87]
.768[19.5]
3.750[95.25]
1.181[30]
.177[4.5] .256
[6.5]
.020[0.5]
FOR SWITCH DIMENSIONSSEE ABOVE
19.125[485.78]
FOR TEACH MODULEDIMENSIONS SEE ABOVE
1.349[34.3]
DETECTION AREA
5(800) 624-8511
www.phdinc.com/switchesJC101
PROGRAMMING GUIDE: SERIES JC1 TEACHABLE SWITCHES
� � �
������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
�������������������������������������������������������������������������������������������������������������������������������������������������������������
�
�
�
�������
���������������
�����
��������������
������������������������
����
����������������������������������������
�����������������
6(800) 624-8511
www.phdinc.com/switches JC101
This switch provides the ability to identify a single position. Solid-state sensing technology provides a highly reliable switch. Elliptical housing allows for easy “drop-in” installation. Includes LED indicator for convenient means of positioning. Available with PNP or NPN output. Available with cable or 8 mm threaded Quick Connect.
SErIES JC1SD MAGNEtIC SwItCH
DIMENSIONS: SERIES JC1SD STANDARD SWITCHES
ENGINEERING DATA: SERIES JC1SD STANDARD SWITCHES
63549-xx CORDSET
HS1(SIZE 35 & 46)(SIZE 58 & 75-SWITCH HOUSINGDOES NOT PROTRUDEBELOW SURFACEOF GRIPPER)
HS3
SWITCH ON OPEN
7.0[18.0]
PART NO.JC1SDP-5JC1SDP-KJC1SDN-5JC1SDN-K
SWITCH DESCRIPTIONPNP (Source), Solid State, 10-30 VDC, 5 meter cablePNP (Source), Solid State, 10-30 VDC, Quick Connect
NPN (Sink), Solid State, 10-30 VDC, 5 meter cableNPN (Sink), Solid State, 10-30 VDC, Quick Connect
MATCHING CORDSETPART NO.63549-0263549-05
DESCRIPTIONM8, 3 pin, Straight Female Connector, 2 meter cableM8, 3 pin, Straight Female Connector, 5 meter cable
mm5.63.2
LETTERDIMHS1HS3
in.220.125
GRK-x-35 X 6.5 or 12MODEL NUMBER
GRK-x-46 X 8 or 16 GRK-x-58 X 10.5 or 20 GRK-x-75 X 12.5 or 26mm.4
10.9
in.015.430
mm�
16.3
in�
.640
mm�
21.6
in�
.850
JC1SDx-5
JC1SDx-K (Quick Connect)
M8 x 1
MIN
196.85[5 m]
.984[25]
.140[3.6]
1.349[34.3]
9.250[234.0]
SPECIFICATIONS JC1SDP-x JC1SDN-xOPERATING PRINCIPLE Solid State Detection of Moving MagnetINPUT VOLTAGE 10 - 30 VDCOUTPUT TYPE PNP (source) NPN (sink)OUTPUT CURRENT 100 mA max., Short Circuit ProtectionVOLTAGE DROP � 2.5 VDCSWITCH BURDEN � 8 mAENVIRONMENTAL IP67OPERATING TEMP. -25�C to 75�C
.111[2.8]
.984[25]
.140[3.6]
.111[2.8]
MIN
PIN 2/4WIRE COLOR
BLACK
PIN 1WIRE COLORBROWN
PIN 3WIRE COLORBLUE� .402
[10.2]
.689[19.3]
1.299[34.8]
STANDARD
63549-xx CORDSET
HS1(SIZE 35 & 46)(SIZE 58 & 75-SWITCH HOUSINGDOES NOT PROTRUDEBELOW SURFACEOF GRIPPER)
HS3
SWITCH ON OPEN
7.0[18.0]
PART NO.JC1SDP-5JC1SDP-KJC1SDN-5JC1SDN-K
SWITCH DESCRIPTIONPNP (Source), Solid State, 10-30 VDC, 5 meter cablePNP (Source), Solid State, 10-30 VDC, Quick Connect
NPN (Sink), Solid State, 10-30 VDC, 5 meter cableNPN (Sink), Solid State, 10-30 VDC, Quick Connect
MATCHING CORDSETPART NO.63549-0263549-05
DESCRIPTIONM8, 3 pin, Straight Female Connector, 2 meter cableM8, 3 pin, Straight Female Connector, 5 meter cable
mm5.63.2
LETTERDIMHS1HS3
in.220.125
GRK-x-35 X 6.5 or 12MODEL NUMBER
GRK-x-46 X 8 or 16 GRK-x-58 X 10.5 or 20 GRK-x-75 X 12.5 or 26mm.4
10.9
in.015.430
mm�
16.3
in�
.640
mm�
21.6
in�
.850
JC1SDx-5
JC1SDx-K (Quick Connect)
M8 x 1
MIN
196.85[5 m]
.984[25]
.140[3.6]
1.349[34.3]
9.250[234.0]
SPECIFICATIONS JC1SDP-x JC1SDN-xOPERATING PRINCIPLE Solid State Detection of Moving MagnetINPUT VOLTAGE 10 - 30 VDCOUTPUT TYPE PNP (source) NPN (sink)OUTPUT CURRENT 100 mA max., Short Circuit ProtectionVOLTAGE DROP � 2.5 VDCSWITCH BURDEN � 8 mAENVIRONMENTAL IP67OPERATING TEMP. -25�C to 75�C
.111[2.8]
.984[25]
.140[3.6]
.111[2.8]
MIN
PIN 2/4WIRE COLOR
BLACK
PIN 1WIRE COLORBROWN
PIN 3WIRE COLORBLUE� .402
[10.2]
.689[19.3]
1.299[34.8]
JC1SDP-K & JC1SDN-K 63549-XX
JC1SDP-5 & JC1SDN-5
JC1SDN-x JC1SDP-x
7(800) 624-8511
www.phdinc.com/switchesJC101
APPLICATIONS: SERIES JC1 STANDARD SWITCHES
Series JC1SD Magnetic Switches replace the old style Series 6790 DC Switches and can be used on all standard PHD Components listed.
• GrIPPErS: Series GRK, EGRK, GRB, GRF (JC1SD only), & GRS (JC1SD only)• rOtArY ACtuAtOrS: Series RI, RCC• SLIDES: Series SFP, SFM, SHP, STP, SIP, SMx, & SxL, SxH• CYLINDErS: Series CRS & CTS
Series SIP
Series GRF (JC1SD only)
Series SxH
Series CTS
Series SFM, SFP
Series SHP
Series GRB
Series STP
Series RI
Series RCC
Series CROld Series 6790Switch
Series GRS (JC1SD only)
Series GRK
8(800) 624-8511
www.phdinc.com/switches JC101
�.5M-I 4/09 7819
PHD, Inc.9009 Clubridge Drive
P.O. Box 9070, Fort Wayne, Indiana 46899 U.S.A.Phone (260) 747-6151 • Fax (260) 747-6754
www.phdinc.com • [email protected]
PHDinEurope GmbHArnold-Sommerfeld-Ring 252499 Baesweiler, Germany
Tel. +49 (0)2401 805 230 • Fax +49 (0)2401 805 232www.phdinc.com • [email protected]