All values mentioned in this document are typical values; Data and specifications are subject to change without notifications.
TWR Lighting • 10810 W Little York Rd, Ste 130 - Houston, TX 77041-4051 • P: 713-973-6905 • F: 713-973-9352www.twrlighting.com • ©2017 TWR Lighting, Inc. • All rights reserved.
OL1CLEDFAA Type L-810 Red LEDLow Intensity Obstruction Light
SPECIFICATIONS
Light Source LED Array
Lens Material Fresnel Acrylic
Base Material Cast A356 aluminum (Red)
Power Requirements 120 - 240 VAC, 50 - 60 Hz12/24/48 VDC
Power Consumption See Table
LED Current 0.06 Amps
Operating TemperatureRange
-67°F to 130°F(-55°C to 55°C)
Effective Intensity (Night) 32.5 CD Minimum
Vertical Beam 10° Minimum
Horizontal Coverage 360°
Wind Load CAAA 0.2 ft²
Dimensions
HeightDiameter
7.5 in (19.05 cm)4.875 in (12.38 cm)
Weight 1.61 lbs (0.73 kg) AC1.25 lbs (0.57 kg) DC
Hub Sizes 0.75 in (1 or 1.25 in with enlarger)
Industries: Broadcast, Telecom, Utilities & Wind Farm
The TWR OL1CLED is an FAA Type L-810 low intensity red LED obstruction light with a painted cast aluminum base.
• 5-Year limited warranty• 96% Reduced energy consumption versus
incandescent• Aviation clear Acrylic Fresnel lens• Painted cast aluminum base, stainless steel latches
and hardware for corrosion protection• Available in side hub or bottom hub configurations• No special tools required for installation or
maintenance• Neoprene gasket for weather proofing
KEY FEATURES
POWER CONSUMPTION
Part Number AC/DC Watts
OL1CLED2 120 - 240 VAC 8.1
OL1CLED3 12 - 24 VDC 7.9
OL1CLED4 48 VDC 8.2
