10. Tools
1-component guns PI1 22-component guns PI2 4Cable Fixer CFR 5Clamp Bands KLB 6MBX - MBX Rubber Brush MBX 7Manometers MAN 9Mixing Tips MIT 10Multi Staple Repair MSR 11Multi-Plug MUP 12Multistrip Detect MDC 13Nova-Boot - Nova-Boot Big NBT 14Novadrill DRL 15Novaflame Multi Torch NMT 16Nozzles SPM 17Other VAR 18Papertool PPT 20Pliers & brushes TAB 21ProKey PKE 23Safety Scraper SAS 24Safety Seal SFS 25Safety Seal Plus SFP 26Swabeez SWA 27Taps & Pumps KPO 28Triggers TRI 30Wire saw DRZ 31
www.novatio.com 10.1
10. Tools
1-component gunsSilgrease gun 75 ml
Article nr Section
201901000 Tools
Seal & Bond Gun sausage 310 ml - 12:1
Article nr Section
315400000 Tools
Mastergun Complete kit
Article nr Section
316510000 Tools
Seal & Bond Gun 310 ml - 12:1
Article nr Section
315100000 Tools
Seal & Bond Gun sausage 310ml - 18:1
Article nr Section
315401000 Tools
Seal & Bond Gun sausage 600ml - 18:1
Article nr Section
315500000 Tools
Seal & Bond Gun 310ml - 18:1
Article nr Section
315101000 Tools
Pro Foam gun
Article nr Section
670903000 Tools
Seal & Bond Gun sausage 310 ml - 25:1
Article nr Section
315402000 Tools
10.2 www.novatio.com V0.0
10. Tools
1-component gunsSeal & Bond Gun sausage 600 ml - 12:1
Article nr Section
315600000 Tools
Foam Gun
Article nr Section
670902000 Tools
Pneumatic Gun MK5 310 ml
Article nr Section
316000000 Tools
Mastergun
Article nr Section
316510000 Tools
Pneumatic Gun MK5 600 ml
Article nr Section
315520000 Tools
V0.0 www.novatio.com 10.3
10. Tools
2-component gunsQ-Fix 120 380 ml gun
Article nr Section
316600000 Tools
Mixing Gun for Auto-Bond / Nova PowerGrip / Quick-Bond 2 x 100 ml
Article nr Section
591901000 Tools
Megaplast PPE mixing gun 1/10 1/1
Article nr Section
593900000 Tools
Novabond 2 mixing gun 2 x 300 ml
Article nr Section
529401000 Tools
Pneumatisch 2-component gun
Article nr Section
599001000 Tools
Megaplast PPE plunger
Article nr Section
593930000 Tools
Pneumatic gun Novabond 2 x 300 ml
Article nr Section
529404000 Tools
Mixing gun 2 x 25 ml
Article nr Section
593901000 Tools
10.4 www.novatio.com V0.0
10. Tools
Cable Fixer CFR
QUICK AND EFFICIENT BUNDLING
• Always the right length without any
waste.
• Easy to apply: wind the band around
the object, tighten, click, ready
• Stretching and cutting in one act.
• Easy to reload.
• Always the right size in stock. Bundles
from 3 mm to 20 meter.
• No more band lying around.
• High quality synthetic band: resistant
to U.V. and most chemicals.
• Can be used everywhere - ideal for
working on "relocations".
General information
CABLE FIXER is a handy tool for bundlingand fixing. Due to the continuous band rolls,you can bundle lengths between 3 mm and15 m, without any waste or loss.CABLE FIXER automatically applies
the stop clip and at the same time cuts theband at the right length in one movementwithout any loss. With CABLE FIXER yousave time and stock.
Technical information and packaging
Band width: 4.6 mm.Band length: rolls of 15 and 100 m.Material UV-resistant polyamide 6.6.Colour: black.Tensile strength: 250 N.Temperature resistance: -40°C to +105°C.Chemical resistance: resistant to oilderivatives, acids, lyes, UV and temperatureinfluences.
Specific weight: 1.14.E-Modulus: 2000 N/mm².Clips: on handy load strips, 20 pieces perload.
Applications and use
• fixing of cables inside and outside• bundling and fixing of wires, cables, hosesin installations, machines, cars, motorbikes,bicycles, boats, etc.
• closing of bags binding up of plants• hi-fi and computer cables• bundling of packages
Product references
Article nr Name Content Section
850200000 Cable Fixer 1 Tools
850220000 Cable Fixer band black15 m 1 Tools
850150000 Cable Fixer clips black 200 Tools
850170000 Cable Fixer replacement knife 1 Tools
850180000 Cable Fixer protection plate Tools
V0.0 www.novatio.com 10.5
10. Tools
Clamp BandsNova-Boot clamp 800mmx8mm
Article nr Section
388955000 Tools
Nova-Boot universal clamp 420mmx7mm
Article nr Section
388953000 Tools
Ligarex Banding Tool 10 mm
Article nr Section
388956000 Tools
Nova-Boot clamp 300mmx6mm
Article nr Section
388957000 Tools
Mounting tool for clamp bands
Article nr Section
388958000 Tools
Nova-Boot clamp 300mmx8mm
Article nr Section
388954000 Tools
Nova-Boot universal clamp 170mmx7mm
Article nr Section
388952000 Tools
10.6 www.novatio.com V0.0
10. Tools
MBX - MBX Rubber Brush MBX
REMOVE GLUE RESIDUES SAFELYAND FAST
• Sand-blast effect thanks to the unique
folded, polished and hardened spring
steel.
• The flexible arrangement of the steel
wires makes it possible to process all
shapes.
• Maximum flexibility, MBX band
carried on air cushion.
• Ideal running speed due to special
reduction system, 3500 rpm without
loss of power.
• Safe construction.
• RUBBER BRUSH for simple fast
removal of glue residue.
General information
MBX bands are made of high qualitypolyamide fabric with a tensile strength of upto 440 kg. The spring steel wires areanchored in a U shape. This product offersoptimum flexibility. Safety and life span: nosatiation, heating or polishing necessary.
MBX RUBBER BRUSH makes it possible toremove glue residues safely and quickly.MBX RUBBER BRUSH is made up of thelatest high-tech polymers and has a longlifespan.
Technical information and packaging
COARSE: 0.7 mm spring steel, bent, polishedand hardened.Coarse sand blast effect.Removal of undercoating and sealingcement.MEDIUM: 0.5 mm spring steel, bent, polished
and hardened. Fine sand blast effect.Removal of paint and rust.FINE: 0.5 mm spring steel, straight. No sandblast effect. Removal of packaging.
Applications and use
BODYWORK• removal of undercoating (coarse)• removal of sealing materials (cements -coarse)• removal of paint (fine)• removal of rust (medium)• removal of glue residue• no heating of the surface• no satiation or spreading out• does not remove any healthy material, nogrinding effect (fine)• removes glue residues from decorativestrips, spoilers and emblems (RUBBERBRUSH)• removal of lettering on bodywork (RUBBERBRUSH)
MECHANICAL• removal of packaging (fine)• removal of rust (medium)• removal of paint (fine)• cleaning of parts (fine)• cleaning of aluminium (fine) roughening ofvarious materials before glue application
INDUSTRY• removal of rust from metal surfaces(coarse)• removal of paint and contamination ofstone and wood (medium fine)
• removal of glue residues from varioussurfaces (medium)• roughening of various materials for gluing(fine)• removal of cement residues from tools(medium)• cleaning or rust removal on difficultsurfaces, fencing, pipes and corners• cleaning of aluminium (fine)• sand blast effect without sand blastinstallation (coarse)• does not remove any healthy material nogrinding effect• removal of lettering (RUBBER BRUSH)• removal of hardened silicones (RUBBERBRUSH)• removal of hardened cement onconstruction equipment (shovel, spade,trowel, spirit level,...) (medium and coarse)• removal of chalk deposit (RUBBER BRUSH)• removal of discoloration of stainless steelwelding seams (RVS)
V0.0 www.novatio.com 10.7
10. Tools
MBX - MBX Rubber Brush MBX
Product references
Article nr Name Content Section
356101000 MBX Machine, pneumatic 1 Tools
356145000 MBX replacement adapter without axle 1 Tools
356000000 MBX Adapter six-sided axle, use indrilling machine 1 Tools
356190000 MBX Adapter narrow Tools
356001000 MBX Adapter six-sided, twisted-off axle6mm 1 Tools
356121000 MBX Band beige - width: 11mm Tools
356110000 MBX Band, coarse, black 10, 20 of 30 Tools
356131000 MBX Band green - width: 11mm Tools
356120000 MBX Band, medium, beige 10, 20 of 30 Tools
356130000 MBX Band, fine, green 10, 20 of 30 Tools
356135000 MBX Band Inox 1 Tools
356140000 MBX Rubber Brush 1 Tools
10.8 www.novatio.com V0.0
10. Tools
ManometersNovairco Digi-manometer
Article nr Section
744008000 Tools
Novairco-Refill Manometer
Article nr Section
744004000 Tools
Novairco koppelstuk
Article nr Section
744007000 Tools
Novairco professional manometer
Article nr Section
744006000 Tools
V0.0 www.novatio.com 10.9
10. Tools
Mixing TipsMegaplast MM / PPE / PU Mixing tips
Article nr Section
597902000 Tools
QFX / NB2
Article nr Section
610191000 Tools
Mixing tips
Article nr Section
529403000 Tools
Mixing tips NPG 2-K
Article nr Section
590906000 Tools
Mixertips NPG / NB2 / MS50 2-K / ABD-QBD
Article nr Section
590902000 Tools
NPG 2K extension tube
Article nr Section
590906012 Tools
10.10 www.novatio.com V0.0
10. Tools
Multi Staple Repair MSR
STRUCTURAL REPAIR ANDMOUNTING OF ALL SYNTHETICMATERIALS
• For all synthetic materials – so
identifying them is unnecessary.
• Also for all difficult plastics, such as
polyethylene, polypropylene and
blends of these.
• Fast and effective.
• Without auxiliary products – no
primers, no cleaning agents, no
preparation.
• Also ideal for repairing and
strengthening supporting and
mounting points.
General information
The MULTI STAPLE REPAIR is a mechanicalrepair method for plastics. This strongstructural repair retains the flexibility neededto re-mount the component. The MULTISTAPLE REPAIR appliance warms the"staples" in order to embed them in thematerial to be repaired. The OEM strength ofthe product is unchanged because no otherproduct has been added.
Three types of staples ensure a comfortableand effective repair. The staples are availablein two versions – the standard model and thePre Cut Staple. The latter has a breakingpoint so that the staples break off in theplastic. The gun of the MULTI STAPLEREPAIR inserts the staples vertically or at anangle of 90° for hard-to-reach places.
Technical information and packaging
Supply voltage: 230 V - 50/60 Hz.Max. power: 35 W.Do not use on fibre-reinforced plasticsDimensions: 165x87x65 mm.Absorption maxima: 160 Ma.
Two 400 mA fuses.Weight: 1.350 kg.Safety measures: please consult the safetycard.
Applications and use
• connect the apparatus to the mains;• Move the button to the desired position:- LED light on green = minimum position forplastic up to 1.5 mm thick;- LED light on yellow = medium for plasticbetween 1.5 and 2.5 mm thick;- LED light on red = maximum position forplastic more than 2.5 mm thick;• select the appropriate staple from the tablebelow and place it in the relevant openings inthe gun (on the 90° head, depending on theapplication);• place the head of the staple on the desiredplace of the plastic to be repaired and pressthe start button of the gun;
• the heat melts the plastic and the staplesinks into the material;• turn the gun softly 5° to embed the staple inthe plastic and release the start button. Allowthe staple to cool before withdrawing thegun;• depending on the type of staple used, cutor break off the protruding ends;• place enough staples to form a sufficientlystrong join.
Product references
Article nr Name Content Section
360500000 Multi Staple Repair 1 pcs Tools
360520000 Staple 0.6 mm V-form 100 pcs Tools
360521000 Staple 0.6 mm spiral small 100 pcs Tools
360522000 Staple 0.6 mm spiral large 100 pcs Tools
360510000 Pre-cut staple angle 0.7 mm 100 pcs Tools
360511000 Pre-cut staple spiral small 0.7 mm 100 pcs Tools
360512000 Pre-cut staple spiral large 0.7 mm 100 pcs Tools
V0.0 www.novatio.com 10.11
10. Tools
Multi-Plug MUP
HIGH QUALITATIVE ANCHOR PLUGSWITH BUILT-IN HARPOON HOOKS
• Ideal for anchoring in hollow blocks.
• Only 2 sizes for most diameters.
• With harpoon hooks for extra
anchoring.
• No waste of product.
• The length of the plugs is fast and
easy adjustable.
General information
MULTI-PLUG is a high quality anchor plugwith built-in harpoon hooks.MULTI-PLUG is very appropriate
for anchoring in hollow blocks. Most diamterscan be covered with only 2 sizes.
Technical information and packaging
MULTI-PLUG 13mm:- for bolts and spindles with a 6 -11 mmdiameter- for drill holes with a 13 -16 mm diameter
MULTI-PLUG 15mm:- for bolts and spindles with a 10 -13 mmdiameter- for drill holes with a 15-18 mm diameter
Applications and use
anchoring in hollow blocksSpindle Nova Nova Megaplast. Power Power PU/MM. Grip 2-K Grip. 250 ml 200 ml 50 mlM10 15-16 11-12 1-2M 8 14-15 10-11 1M 6 13-15 9-11 1
Spindle Nova Nova Megaplast. Power Power PU/MM. Grip 2-K Grip. 250 ml 200 ml 50 mlM10 8-10 7-9 1M 8 8-9 6-8 0.5-1M 6 7-9 5-7 0.5-1
Product references
Article nr Name Content Section
591833000 Multi-Plug 13 mm 50 Tools
591835000 Multi-Plug 15 mm 50 Tools
10.12 www.novatio.com V0.0
10. Tools
Multistrip Detect MDC
STRIPPER KNIFE WITH BUILT-INVOLTAGE DETECTOR FORACCURATE, SAFE AND FASTSTRIPPING
• Suitable for all standard round cables
of 4 mm to 28 mm.
• The cutting depth can be adjested via
the adjusting screw whereby the inner
conductors can be avoided.
• Stripping can be done lengthwise or
around the wire thanks to the high
quality, self turning knife.
General information
MULTISTRIP DETECT is a cable and wirestripper knife with a built-in voltage detectorthat can spot voltages from 50V till 600V andthis without direct contact with the innerconductors. The cutting depth can beaccurately adjusted by the adjusting screwwhereby possible damage to the innerconductor can be avoided.
The build-in voltage detector can detectcable separations, hidden wires and eveninterruptions in the voltage range.MULTISTRIP DETECT strips cable of 4 mm to28 mm round as well as lengthwise.
Technical information and packaging
Detection range: 50 - 600V.Readout:- Voltage = light on- no voltage = no lightFrequency range: 50 - 600 Hz.Battery: 2 x 1.5 V button cell battery.
Temperature range: 0°C - 40°C.Detects through: wood, bricks, cellularconcrete.
Applications and use
• to retrieve built-in or hidden electric cables,branch boxes, transformers and applianceswith voltage• to find flaws in extension cords• fastens the testing of bifilar light switches• to find hidden branchboxes, branchpoints, ...STRIPPINGOpen the valve and insert the cable. Pressthe cable against the swivel-vlade and closethe valve.Turn 1 or 2 times.Cut lengthwise and strip the cover.Adjust the cutting depth by turning the screwon the bottom of the grip.The stripping range: 4mm to 28mmTESTActivate the voltage detector by pressing theON/OFF button (for 3 seconds).
When the LED lights flash the MultistripDetect is ready for use.In the vicinity of dangerous current changingfrom 50V to 600V the LED light will flashquickly.The voltage detector switches offautomatically after 10 minutes.By keeping th ON/OFF button pressed thevoltmeter switches off.REPLACE BATTERIESIf the voltage detector does not give a signal,the batteries need to be replaced. Open thedevice with the screwdriver and remove thebattery unit. Replace the old batteries by newones type LR44 1.5V taking the polarity intoaccount. Insert the battery unit back in thegrip.
Product references
Article nr Name Content Section
861010000 Multistrip Detect 1 Tools
V0.0 www.novatio.com 10.13
10. Tools
Nova-Boot - Nova-Boot Big NBT
UNIVERSAL CONSTANT VELOCITYJOINT BOOT
• One single type of boot for 98% of the
fleet.
• Extra gain of time due to quick and
easy installation.
• Supplied with special lubricating
grease and clamps.
• For both inside and outside
homokinetics.
• Very flexible neoprene rubber -
exceeds the manufacturer's
specifications.
• Stainless steel clamps for a perfect
fixing.
• Accurate fit and "original" look.
• Always the right boot in stock.
General information
NOVA-BOOT is the newest universal cardansleeve, manufactured from the highest qualityneoprene.
NOVA BOOT is completely adapted to themost difficult cardan types.
Technical information and packaging
Inject the NOVA-BOOT assembly cone withNOVA-BOOT LUBE and place it on theground.Press the arms of the NOVA-BOOT assemblytogether and shove the broad end of theNOVA-BOOT over the 2 clamping brackets.Important: before assembling a sleeve on acoupling on the gearbox, read theinstructions at the end.Press in the small upper end of NOVA-BOOTand inject this abundantly with NOVA-BOOTLUBE.Turn the assembly tools with NOVA-BOOTaround and place this centrally on theassembly cone.
Push the assembly tool with the boot in anuninterrupted and powerful movementdownwards.Slide the entire unit over the cardan head andpress the sleeve into its position.Give a brief tap on the base of the assemblyequipment to remove the cone andequipment.Apply the associated grease to the couplingand put the boot in its positionFasten the sleeve with the tensioning bands.
Product references
Article nr Name Content Section
388700000 Nova-Boot Set New set (12 stuks) Tools
388959000 Nova-Boot universal clamp800mmx5mm 12 pcs Tools
388950000 Nova-Boot Cone, cone diam. 100mm Tools
388706000 Nova-Boot Set New Tools
389954000 Nova-Boot Tool 1 Tools
388981000 Nova-Boot Lube 400 ml Tools
389810000 Nova-Boot universal steering wheel set (2 stuks) Tools
389800000 Nova-Boot Wheelhouse axle cover Tools
388954000 Nova-Boot clamp 300mmx8mm 24, 48, 96 of 120 Tools
388955000 Nova-Boot clamp 800mmx8mm 24, 48, 96 of 120 Tools
388957000 Nova-Boot clamp 300mmx6mm 12 Tools
388952000 Nova-Boot universal clamp170mmx7mm 24, 48, 96 of 120 Tools
388953000 Nova-Boot universal clamp420mmx7mm 24, 48, 96 of 120 Tools
10.14 www.novatio.com V0.0
10. Tools
Novadrill DRL
UNIQUE COBALT DRILL BIT WITHSPLIT POINT
• Very high toughness reduces breaking
to a minimum.
• Up to 10x longer cutting life.
• No centre punching - not even on
curved surfaces.
• Optimal heat and chip removal due to
deep helix.
• Less temperature development due to
cobalt alloy.
• Especially suitable for drilling hard
alloy steels and stainless steel.
• Very effective in the removal of broken
screws, bolts, studs and socket
screws.
General information
NOVADRILL is an H.S.S. Co spiral drill bitaccording to DIN 388 Type N.NOVADRILL has a cylindrical shank with splitpoint (from dia 2,5 mm to dia 13 mm).The top angle is 133°.NOVADRILL is especially appropriate
for mental removal of hard to dress metaltypes. Safety measures: consult the SafetyData Sheet.
Product references
Article nr Name
325010000 Novadrill 1 mm 34 mm 12 mm
325015000 Novadrill 1,5 mm 40 mm 18 mm
325020000 Novadrill 2 mm 49 mm 24 mm
325025000 Novadrill 2.5 mm 58 mm 30 mm
325030000 Novadrill 3 mm 62 mm 33 mm
325035000 Novadrill 3,5 mm 70 mm 39 mm
325040000 Novadrill 4 mm 75 mm 43 mm
325045000 Novadrill 4,5 mm 81 mm 47 mm
325050000 Novadrill 5 mm 86 mm 52 mm
325055000 Novadrill 5,5 mm 93 mm 57 mm
325060000 Novadrill 6 mm 93 mm 57 mm
325065000 Novadrill 6,5 mm 101 mm 63 mm
325070000 Novadrill 7 mm 109 mm 69 mm
325075000 Novadrill 7,5 mm 109 mm 69 mm
325080000 Novadrill 8 mm 117 mm 75 mm
325085000 Novadrill 8,5 mm 117 mm 75 mm
325090000 Novadrill 9 mm 125 mm 81 mm
325095000 Novadrill 9,5 mm 125 mm 81 mm
325100000 Novadrill 10 mm 133 mm 87 mm
325105000 Novadrill 10,5 mm 133 mm 87 mm
325110000 Novadrill 11 mm 142 mm 94 mm
325115000 Novadrill 11,5 mm 142 mm 94 mm
325120000 Novadrill 12 mm 151 mm 101 mm
325125000 Novadrill 12,5 mm 151 mm 101 mm
325130000 Novadrill 13 mm 151 mm 101 mm
325001000 Novadrill assortment . 1mm - 10 mm (19)
325005000Novadrill Cobalt drill bitassortment for tapmeasurements
. M3 tem M14 (9 stuks)
325033000 Novadrill 3,3 mm 65 mm 36 mm
325002000 Novadrill assortment . 1mm - 13 mm (25)
325042000 Novadrill 4,2 mm 75 mm 46 mm
325052000 Novadrill 5,2 mm 86 mm 55 mm
325068000 Novadrill 6,8 mm 110 mm 70 mm
325102000 Novadrill 10,2 mm 134 mm 90 mm
326808000 Novadrill spotweld 8 mm 80 mm 38 mm
326456000 Novadrill spotweld 6 mm 45 mm 17 mm
326458000 Novadrill spotweld 8 mm 45 mm 24 mm
V0.0 www.novatio.com 10.15
10. Tools
Novaflame Multi Torch NMT
MULTIFUNCTIONAL TOOL FOR THEPROFESSIONAL
• Handy 5 in 1 tool: cut and melt,
solder, connect and heat, with or
without a flame.
• Wireless, so autonomous.
• With a thermal regulation.
• Automatic feed shut-off when using
the cap
• Ideal for repairing printed circuit-
boards, cable bundles, and also to
facilitate the cutting and repair of PS,
PP, PE, PTFE,...
General information
The professional hot air blower, solderingbolt, torch,... for the specialist, 5 functions in1.
Technical information and packaging
Length: with sealing cap: 233 mm; withsoldering bit: 215 mm.Weight: 142 g.Temperatures: soldering bit: 250-500°C;torch: 1300°C; hot knife: 200-350°C; hot airblower: 250-500°C.
Volume of gas: 20 ml.Working time: 120 min with normal use.
Applications and use
5 FUNCTIONS IN 1Hot air blower: by using the replaceable hotair head, you can heat and fold plasticswithout damaging them.The hot air head is also a very practicalinstrument when soldering the Duoflux andTopflux connectors without any connectiondamage to the surrounding cables.Also shrink-sleeves like Thermoflux shrinkeasily with this hot air current.Deflector: for very temperature-sensitivebackgrounds, you can use the deflector toreflect the hot air, like e.g. with calbebundles.
Soldering bolt: in the set you will find 2replaceable soldering bits of differentdimensions.Torch: with the torch shape NOVAFLAMEMULTI TORCH can be used to loosen smallfixed bolts and nuts by heating them.Hot knife: the hot cutting knife can be used tocut polystyrene plates, nylon nets, canvas,...in the most difficult shapes.
Product references
Article nr Name Content Section
360400000 Novaflame Multi Torch set Tools
360401000 Novaflame Multi Torch refill 6 pcs Tools
360411000 Novaflame Multi Torch soldering bitround 1,6mm 1 Tools
360412000 Novaflame Multi Torch soldering bitround 3,2mm 1 Tools
360413000 Novaflame Multi Torch soldering bit flat2,4mm 1 Tools
360414000 Novaflame Multi Torch soldering bit flat3,2mm Tools
360415000 Novaflame Multi Torch soldering bit flatand inclined 2,4mm 1 Tools
360416000 Novaflame Multi Torch soldering bit flatand inclined 3,2mm 1 Tools
360417000 Novaflame Multi Torch soldering knife 1 Tools
360418000 Novaflame Multi Torch hot air blower 1 Tools
360419000 Novaflame Multi Torch Deflector 1 Tools
10.16 www.novatio.com V0.0
10. Tools
NozzlesNozzl narrow (0,8 -1,2)cm
Article nr Section
599516000 Tools
360° rotating nozzle
Article nr Section
599422000 Tools
Needle adapter nozzle for MS Construct
Article nr Section
599307003 Tools
Nozzle width 2 cm
Article nr Section
599515000 Tools
Nozzle adapter
Article nr Section
599309000 Tools
V-nozzle for MS Construct with needleadapter
Article nr Section
599307004 Tools
Nozzle for Mastergun
Article nr Section
599517000 Tools
Hersluitbare transparante spuitmond
Article nr Section
599411000 Tools
V-nozzle for MS Screen
Article nr Section
599518000 Tools
V0.0 www.novatio.com 10.17