www.haas-recycling.de
Phone: +49(0)26 61/98 65-0Fax: +49(0)26 61/98 65-20E-Mail: [email protected]
HAAS Recycling SystemsUnter den Weiden 656472 Dreisbach/Germany
GERMANYMADE IN
QUALITY
3 4 6
8
752
2 3 4 6
5 7 8 9
Tyron Shredder Electro Overband Magnet Waste Screen Windshifter
Organic/Fine Material Heavy Material OutputFine Shredder
1. Infeed Material: industrial waste, MSW, paper, textile and fibre, plastic and packaging waste2. HAAS Slow Speed Shredder TYRON: for the pre-crushing of the material to 0-300 mm3. Electro Overband Magnet: to separate the ferrous parts4. Waste Screen: to separate the organic fraction 0-60 mm5. Organic/Fine Material: 0-60 mm6. Windshifter: to separate heavy and light material (foils and plastic) 7. Heavy Material: stones, non-ferrous parts, etc.8. Fine Shredder: for the shredding of the light material to 0-40 mm (or according to customer‘s specifications)9. Output: RDF (refuse derived fuel)
GERMANYMADE IN
QUALITY
HAAS waste sorting and RDF production lines
We can offer various solutions for the preparation of industrial waste and MSW to a valuable and useful RDF product (used in cement and steel industry) with our widespread product range consisting of:
Pre-crushing with a HAAS slow speed shredder TYRON HAAS conveying systems Manual sorting in a HAAS sorting cabin with low speed belt HAAS screening solutions Metal and non-ferrous separation Windshifting to separate light weight and heavy material Secondary shredding with HAAS fine shredder solutions Baling of the end product
RDF Shredding Solution
1 Infeed Material
www.haas-recycling.de
1. Tyron Shredder for the pre-shredding of the material2. Belt conveyors for the reception and transport of the material3. Sorting cabin with sorting belt for hand sorting of the material4. Stationary drum screen to screen the material in three fractions
(0-60 mm , 60-180 mm, >180 mm)5. Ferrous parts separated by the permanent magnet6. Non-ferrous parts separated by the eddy current separator 7. Chain conveyor8. Baler to press bales out of the material
2
3
4
1
2
1
3
4
Infeed Material
Tyron Shredder
Belt Conveyors
Sorting Cabin
Example MSW shredding-, screening-, sorting and baling
4
56
78
3
4
5
4
8
Drum Screen
Hand Sorted Material
Drum Screen
Drum Screen
Permanent Magnet
Drum Screen
Baler
5
6
Organic Fraction 0-60 mm
< 180 mm
60-150 mm
Do not hesitate to contact us for further information or an individual planning.
Fine Fraction Middle Fraction
GERMANYMADE IN
QUALITY
www.haas-recycling.de
Phone: +49(0)26 61/98 65-0Fax: +49(0)26 61/98 65-20E-Mail: [email protected]
HAAS Recycling SystemsUnter den Weiden 656472 Dreisbach/Germany
GERMANYMADE IN
QUALITY
3 4 6
8
752
2 3 4 6
5 7 8 9
Tyron Shredder Electro Overband Magnet Waste Screen Windshifter
Organic/Fine Material Heavy Material OutputFine Shredder
1. Infeed Material: industrial waste, MSW, paper, textile and fibre, plastic and packaging waste2. HAAS Slow Speed Shredder TYRON: for the pre-crushing of the material to 0-300 mm3. Electro Overband Magnet: to separate the ferrous parts4. Waste Screen: to separate the organic fraction 0-60 mm5. Organic/Fine Material: 0-60 mm6. Windshifter: to separate heavy and light material (foils and plastic) 7. Heavy Material: stones, non-ferrous parts, etc.8. Fine Shredder: for the shredding of the light material to 0-40 mm (or according to customer‘s specifications)9. Output: RDF (refuse derived fuel)
GERMANYMADE IN
QUALITY
HAAS waste sorting and RDF production lines
We can offer various solutions for the preparation of industrial waste and MSW to a valuable and useful RDF product (used in cement and steel industry) with our widespread product range consisting of:
Pre-crushing with a HAAS slow speed shredder TYRON HAAS conveying systems Manual sorting in a HAAS sorting cabin with low speed belt HAAS screening solutions Metal and non-ferrous separation Windshifting to separate light weight and heavy material Secondary shredding with HAAS fine shredder solutions Baling of the end product
RDF Shredding Solution
1 Infeed Material
www.haas-recycling.de