CC2200 SSBB1188 SSBB1188 SSRRXXVVSS113300
Ø 130 mm
cylinder unit brush units blowers
working units suitable for installation in any position inside the machine frame
top machine availablefrom 2 to 3 working
units
max.300
kg
11150 [mm]
heigth offeed table
750÷900[mm]
2200[mm]
sanding beltlength
Universal working center for deburring and finishing fer-rous and non ferrous materials.These machines are available with variable height,working width of 1150mm, and can process heavyparts of weight up to 300 Kg.
The machine utilizes 2200mm long sanding belts.
Thanks to our modular concept, it is possible to builda custom "working center" by inserting the properworking units required for each application.
The frame is engineered to hold 2-3 internal workingunits, and one auxiliary unit.
The high rigidity of the frame and feed of this machine- combined with the advanced mechanics and electro-nic features - make of this series a universal workingcenter for deburring and finishing.
AAuuxx
12 AAuuxx
123
CC2200 CCAA1166 -- CCAA3322 SSBB1188 SS1188 SSRRXXVVSS113300
Ø 130 mm
cylinder unit pad units brush units blowers
Universal working center for deburring and finishing fer-rous and non ferrous materials.These machines are available with constant feed heightfor in-line operation, and to simplify the processing oflarge parts. They are available with a working width of1350mm, and can process parts of weight up to 400 Kg.
The machines utilizes 2620mm long abrasive belts thatguarantee longer life and a consistent finishing, redu-cing the consumable costs.
Thanks to our modular concept, it is possible to build acustom "working center" by inserting the proper workingunits required for each application.
The frame is engineered to hold 2-3 internal workingunits, and one auxiliary unit.
The high rigidity of the frame and feed of this machine -combined with the advanced mechanics and electronicfeatures - make of this series a universal working centerfor deburring and finishing.
AAuuxx
12 AAuuxx
123
max.400
kg
1350 [mm]
heigth offeed table900
[mm]
sanding beltlength2620[mm]
top machine availablefrom 2 to 3 working
units
working units suitable for installation in any position inside the machine frame
Orbital unit withabrasive disks
Brush unit with abra-sive inserts
Brush units withsteel wire
Cylinder unit - Pneumatic Grit-set with 6 positionrevolver to quikly compensate the thickness dif-ference of the various types of abrasive belts.
Sanding belt tracking photocell.
Longitudinal brush unit Ø 180 mm with height adjustment and mechanicalthickness read-out. Lateral brush oscillation system.Our brushes are available in various materials: steel, stainless steel, scotchbrite™, and many other.
steel,
stainless steel
scotch brite™
tynex
abrasive inserts
standard & optional features
The XVS unit is completely extractable, for quick and easy change of the brushtools. The XVS utilizes readily available, low-cost, brushes as well as more speci-fic brush tools with different materials and diameters for special utilizations.
Air jet blowers (opt.)Oscillating jet blowers for an effi-cient cleaning of sanding belts,they activate only when theworkpiece is being processed.
Vacuum-Plant (opt.)A high speed fan generates a vacuumsuction under the working unitsthrough a punched feed belt to allowthe processing of small, slippery parts.
Double pressure rollers withmicrometric precision adjust-ment mounted in the frontand rear of each working unit.
Infeed and outfeed tableextensions to ease the loa-ding-unloading of workpie-ces.
Each working unit motor isequipped with a disk brake toallow the machine to stop in afew seconds in the case ofemergency.
The VISION PLC panel enables the visualization of theactula setup data and the machine operations througha touch-screen monitor.All working programs can be stored in the PLC me-mory for future utilization.
Power Savings FeaturesThe power-saving features (standard), allow the use ofthe machine with the maximum efficiency, and respectof the environment.
PLC VISION
control panel
Intuitive and complete control panel, equippedwith diagnostic leds to signal faults and emergen-cies.
Digital thickness display.
Electromechanical Panel
available versions
Deburring of using a mach
Deburring and edge using a ma
Deburring and edge rouusing a m
oxiflame, plasma-cut parts,hine in configuration “CC”
rounding of oxiflame, plasma-cut parts, achine in configuration “CCV”
unding of punched, sheared, or laser-cut parts, machine in configuration “CV”
available versions
Deburring, edge rounding and parts, using a machine
Deburring and polishing (cosmeusing a
Deburring and polishing (cosmetfor Duplo finish and/or Sco
of laser-cut, punched, or shearede in configuration “CVC”
etic grinding) hot/cold rolled stainless steel, or aluminum,machine in configuration “CCC”
tic grinding) of hot/cold rolled stainless steel, or aluminum, otch-Brite ™, using a machine in configuration CCS
riverAstico
highwayA 31
highwayA 31
EXITDueville
highway A31
highway A31
05/1
215
(00)
-G
R
We reserve the right to change features without any notice
AirportsVenezia: 90 Km - 1h driveTreviso: 75 Km - 1,5 h driveVerona: 65 Km - 45 min driveBologna: 160 Km - 2h drive
Train StationVicenza: 30 km - 30 min drive
Car Directions
To the Factories in SandrigoHighway A31 - Exit Dueville - 3,5 km
To the Main Office in SchioHighway A31 - Exit Thiene-Schio - 13 Km
Location - Italy - Veneto
Factory of Sandrigo 2
Factory of Sandrigo 3
Headquarter of Schio
SSCHIOZ.I. Schio
MaranoVicentino
DUEVILLE
SANDRIGO
700 m
700 m
1400 m
5000 m
4500 m
1200 m
2300 m
500 m
THIENE
COSTA LEVIGATRICI S.p.A.Via Venezia, 144 - 36015 Schio (VI) ItalyTel. (+39)0445-675000 – Fax (+39)0445-675110www.costalev.com - [email protected]
Via Venezia, 14436015 Schio
Via G.Galilei, 536066 SandrigoItaly
Via Galvani, 136066 SandrigoItaly
EXITThiene