8/7/2019 Unwind station
1/15
1800 HD
Maximize your productivity with this high volume press. Wide web width and heavy duty
construction combine to give you consistent performance and high productivity on long run jobs.
Built to run three shifts a day, 365 days a year. The 1800 features durable all steel construction
and heavy duty die stations that stand up to years running even the heaviest converting jobs like
folding cartons, tags and forms.
http://www.propheteerintl.com/1800.html
http://www.youtube.com/watch?v=HqT1cwUIS88
http://www.youtube.com/watch?v=eE2j-kV7DUU
http://www.jsguangcheng.com/e_proview.asp?id=656
http://www.youtube.com/watch?v=8MyK2eZUpcM
STANDARD FEATURES
UNWIND
Roll Lift - maximum roll capacity is 40 inches diameter, 18.25 inches wide weighing 957 pounds
Coreholder- three inch diameter air expanded coreholder, with inflator included.
Roll End Detector - the follower arm is easily adjusted to minimize waste when using cores of different
thickness.
Unwind Dancer - regulates the roll tension brake and smoothes out tension variation caused by an out-of-round
http://www.propheteerintl.com/1800.htmlhttp://www.youtube.com/watch?v=HqT1cwUIS88http://www.youtube.com/watch?v=eE2j-kV7DUUhttp://www.jsguangcheng.com/e_proview.asp?id=656http://www.youtube.com/watch?v=8MyK2eZUpcMhttp://www.propheteerintl.com/1800.htmlhttp://www.youtube.com/watch?v=HqT1cwUIS88http://www.youtube.com/watch?v=eE2j-kV7DUUhttp://www.jsguangcheng.com/e_proview.asp?id=656http://www.youtube.com/watch?v=8MyK2eZUpcM8/7/2019 Unwind station
2/15
roll.
Splice Table - pneumatic clamps and a cutting surface with a built-in straight edge and adhesive tape roll holder
facilitates accurate and fast splicing.
Unwind Tension System - a high friction roller connected to a magnetic brake creates web tension. A transducer
roll located downstream from the unwind tension drum measures the amount of web tension, feeding that
information to the tension controller, which in turn controls the magnetic brake. The tension controller features
convenient setting buttons and numeric display of set point and running tension.
Edge Guide - an electronic edge guide precisely controls the web position of opaque and transparent materials.
Control panel functions include push buttons for Jog, Stop and Emergency Stop (which remains engaged when
activated). Controls for the roll lift and brake, splice table clamps, web tension and edge guide are conveniently
located.
PRINTING- Maximum printing width is 17.25 inches.
- Plate cylinder circumferences range from 8 to 24 inches.
- Drying is by high velocity air, with three heat settings.
- Lineal (web direction) running registration adjustment is motorized 360 with controls located at the print tower
and the master control panel at the delivery end of the press.
- Lateral (across the web) running registration adjustment is 3/8 inch.
- Ceramic anilox roll, 65 durometer meter roll and drop-in doctor blade are included.
- Idling drive for the anilox roll and metering roll engages when the press stops.- Inking system contact with the plate cylinder is thrown off before the press stops for plate wiping.
- Impression rolls are through-hardened precision ground tool steel treated for corrosion resistance.
- The inking system can be skewed to achieve perfect alignment to the printing plate, and to compensate for any
inconsistencies in plate or stickyback material thickness.
DIECUTTING
Three diecutting stations are standard:
- Maximum die circumference is 24 inches.
- Minimum die circumference capability is 6.5" for top side diecutting and 8" for bottom side diecutting.
- Manual 3/8" lineal registration adjustment.
- Removable through-hardened precision ground tool steel base rolls in each station.
- Lower base rolls provide support and stability for the removable base rolls.
- Die pressure hardware is quickly and easily removed and installed to expedite die change.
- Bearer and bearing oil wipers.
- One inch thick steel frames.
8/7/2019 Unwind station
3/15
WASTE MATRIX REWIND
- Single 30" rewind capacity.
- 3" pneumatic coreholder with inflate/deflate switch on the control panel.
- Driven and capstan and pressure roll for efficient waste stripping and rewinding.
SLITTING AND PULL ROLL
- Three laterally adjustable air operated slitters, with a through hardened and ground tool steel base roll.
- Pneumatic adjustment for pull roll pressure.
- Pull roll can be removed for cleaning.
SHEETING
One diecutting station is provided.
- Maximum die circumference of 24 inches.
- Minimum die circumference capability is 6.5" for top side and 8" for bottom side diecutting. *
- Manual 3/8" lineal registration adjustment.
- Removable through-hardened precision ground tool steel base roll.
- Lower base roll provides support and stability for the removable base roll.
- Die pressure hardware is quickly and easily removed and installed to expedite die change.
- Bearer and bearing oil wipers.
- One inch thick steel frames.
REWIND
- One cantilever shaft provided, 40" diameter capacity.
- Motor driven shaft with manual tension adjustment.
- Three inch diameter air expanded coreholder with inflate/deflate switch on the control panel.
OPTIONS
UNWIND
Corona treater - Elevates surface energy of film materials to improve ink adhesion.
Larger diameter roll capacity - 50", 60" and 72" roll stands with integral hoists or automatic roll splicers up to
72" diameter.
Multiple unwinds - For multiple web products.
Web cleaner - Various systems; one or two-sides, wet or dry brush or non-contact, and static eliminator bars.
PRINTING
Adhesive print kit - Separate the liner and facestock of P.S. material for the purpose of printing on the adhesive
8/7/2019 Unwind station
4/15
side of the facestock, then relaminate the two webs together (also called delam-relam).
Automatic registration control system - An electronic system monitors and controls printing registration.
Cartridge doctor blade - The cartridge seals against the anilox roll, eliminating the need for an open ink
reservoir and doctor roll. Requires an ink pump. Maximum printing width is 16-1/4 inches.
Ceramic anilox roll - Additional anilox rolls with other cell counts and volumes may be specified.
Diecutter - A diecutting module with up to three diecutting stations can be located between any press modules.
Ink pump - Air-operated centrifugal or electric peristaltic ink pumps.
Reverse print kit - Printing on the bottom side of the web can be done without the use of a turn bar by reversing
the rotational direction of the print station. A cartridge doctor blade system is required, and is included with the
kit.
Rotary screen head - Rotary screen printing with UV inks. Available with automatic register control and variable
power UV lamps.
Turn bar - Used to turn a web upside-down; typically for back printing (see Reverse Print Kit for an alternate
method for back printing). Compressed air required.
UV curing - UV lamps of various power are available, with manual or automatic speed-tracking power supply.
Infrared (IR) cut filters are also available for heat control. An exhaust blower is included.
Chill roll - For heat sensitive stocks, a chill roll will remove most of the heat from UV, IR or hot air dryers.
DIECUTTING
Additional waste rewind - Add a second 30" diameter waste rewind for piggyback material stripping or for
laminating release film rewinding.Additional die stations - Space on the waste rewind module for a fourth diecutting station.
Dual waste rewind - provides two waste rewind shafts for double waste stripping or for winding laminating liner
and waste matrix. Maximum rewind diameters is 24 inches.
Hot foil stamping - Add a foil unwind and rewind system, foil saver system and custom engraved stamping dies.
Lamination unwind - Pneumatic-controlled brake on cantilevered shaft unrolls the laminating film. Laminating
film with release liner requires a waste matrix rewind stand to rewind the liner.
Lateral die adjust - Provides 3/8" side-to-side running adjustment of the die for alignment to the printed web.
Linehole punching - A punching module can be added on a diecutting base.
Motorized 360 registration - Web direction register change can be made from the main control panel using
push buttons.
Narrow die adapter - Adapters for narrower dies and for dies of other press designs.
Shear cut slitting - Replaces the standard crush cut slitters.
Waste break detector - Optical sensor monitors the waste matrix and stops the press if the matrix breaks.
8/7/2019 Unwind station
5/15
DELIVERY
Folder - B. Bunch folder and drive connection to the press.
Rewind roll unloader - A pneumatic lift system unloads the rewind roll.
Second cantilever rewind shaft - Add a second shaft with 24" rewind capacity.
Stacker - Three models are available; a conveyor for forms and labels, a stacker for cartons and a de-nesting
stacker to separate nested diecut cartons. A Batch counter counts and separates batches of sheeted product.
Tension control - Enhance the rewind drive to include automatic taper tension control.
ACCESSORIES
Strobe light - Strobe lighting provides web viewing at production speed - commonly used to check printing
registration targets.
Video Plate Mounter - Plate mounter with video cameras to magnify alignment marks 20 times for high
mounting accuracy.Web break detectors - Optical sensors monitor the web at several points throughout the press. A display panel
identifies the location of the web break in multiple web break sensor installations.
Video web viewing system - Video camera-based system with high quality monitor for web inspection at
production speed. Used for checking print quality and registration.
Pneumatic systems consisting of a controller, valve, and cylinder must be sized to support and move a load in
both vertical and horizontal orientations. After determining the orientation and support structure, the maximum
load that can be moved can be determined. From this information, the cylinder bore and stroke can be calculated
based on available air pressure and flow. Granted, heavier loads require larger cylinders, higher pressures, or both.
Still, a cylinder with an 8 in.-bore has a cap-end piston area of about 50 in.2, so it can produce a theoretical thrust
of 11/2 tons from a supply pressure of only 60 psig.
8/7/2019 Unwind station
6/15
CTC Internationalintroduces its Model SHDL-900-EG Edge Guided Heavy Duty Constant Tension Unwind
Stand.
The unwind stand can handle a variety of materials including tag, label, board, film, paper, foil and other
materials used in packaging and converting applications.
The Heavy-duty double end supported design allows rolls as large as 40 diameter to easily be accommodated.
Rolls are unwound from a removable air shaft supported at both ends by safety locking chucks.
The Stand features an integral roll lifting system using 2 heavy duty air cylinders and a minimum number of parts,
and is capable of lifting rolls exceeding 850 lbs. in weight.
The closed loop pneumatic tension Control system utilizes a generously sized web festoon whose positionproportionally controls a heavy duty pneumatic braking system, providing precise web tension. Web tension is
easily adjustable while running.
Options include splicing table, web pen marking system and end of roll indicator. The machine is customizable
for a variety of Diameters, Web Widths and core sizes and can be manufactured to meet CE compliance.
Pelican
http://www.ctcint.com/http://www.ctcint.com/http://www.ctcint.com/8/7/2019 Unwind station
7/15
The Machine :
Pelican's range of converting machinery is designed and developed to achieve high standards in flexible packaging. It'sstate-of-the art technology offers freedom to carry out even difficult jobs.
Salient features:
Carefully and methodically machined strong and sturdy heavy duty frame structure having good combination ofplate with cast iron, to maintain over long dependable life. This distinctively designed frame structure mounted onheavy-duty base
AC Digital drive based automatic web tension control systems: Load cell and or dancer based closed loop ACdigital vector controlled Five drive system on (1) Primary unwind station (2) Secondary unwind station (3) Coatingstation (4) Laminating station (5) Rewind station. These types of control loops ensure constant tension through-out reel run, right up to core diameter
Pneumo / hydro web guiding system, air shaft with safety chucks on both the unwinding station
Pneumatically operated impression rubber roller and doctor blade System
High efficient nine meters Insulated-drying chamber divided in four zones with exhaust system consists with hotair generator or thermic fluid heating system with automatic temperature controller.
Pneumatically openable four zone drying chamber for web threading and cleaning
Gravure type coating station accommodates integral shaft type or hollows type coating cylinder
The machine is fitted with worm gearboxes, which ensure smooth rotation at all speed level
Remote operator control panel fitted on coating station and laminating station to facilitates easy operation of thesystem
Catwalk through-out the length of the machine
Quick change-over pressure roller assembly
8/7/2019 Unwind station
8/15
Over and above other features also exist
Material Substances :
For coating:Pet 12-30 micronsNylon cast 30-80 micronsBOPP 18-80 microns
For laminating:LDPE / HDPE 25-150 micronsBOPP 18-80 micronsNylon cast 20-80 micronsPet 12-30 micronsVarious Co-ex 12-30 microns
Unwind Stands
Shafted Roll Stands
Unwind stands are designed for your specific application
Stands can be configured for multiple web materials Accessories are provided and custom made for your stand
Unwind Stands
8/7/2019 Unwind station
9/15
A Double Eroll stand
is a rugged, complete, packaged solution for unwinding web material. It featuresthe highest quality accessories available, appropriately specified for your application, and pre-
configured for easy integration into your process.
If you would like more information, or if you would like to receive a quotation for your specific
application, please click here.
Solution Series Roll Stands
Entire system is designed specifically for your application by Double E's expert engineers.
8/7/2019 Unwind station
10/15
Pre-assembled roll stand has a warranty as a package from one supplier. All components work together
for optimal winding control without the hassle of installing each accessory.
Flexible design allows low costs for stands ranging from simple stationary unwind stands to morecomplex motorized rewind stands. Prices for new equipment from Double E are often lower than
comparable used equipment.
Stands can be configured for multiple web materials and/or paths for manufacturing flexibility.
Double E stocks all non-custom parts and manufactures custom accessories (like shafts) quickly to
enable unusually fast lead times on the complete package
Solution "S" SeriesClick here.
Need nip or pull roll stations? Click here
Please click here if you would like more information, or if you would like a quote on roll stand systems.
Solution "S" - Simple Unwind Stand
The Solution Series
Simple Unwind Stand
Ideal when tension control is already established, and a stand is needed only to support the shaft, safety
chucks, and brake.
Standard model includes A-frame, 60 - 100 web width, 40 max roll diameter, steel DynaGrip lug
shaft, Re Combiflex pneumatic brake, SP11 safety chucks, and one exit roller.
http://www.doubleeusa.com/shafted-roll-stands/unwind-stands.htm#Shttp://www.doubleeusa.com/shafted-roll-stands/nip-station.htmhttp://www.doubleeusa.com/forms/unwind-stand-specifications-request.htmhttp://www.doubleeusa.com/shafted-roll-stands/unwind-stands.htm#Shttp://www.doubleeusa.com/shafted-roll-stands/nip-station.htmhttp://www.doubleeusa.com/forms/unwind-stand-specifications-request.htm8/7/2019 Unwind station
11/15
Options/Upgrades: Web guiding, DuraLight carbon fiber lug shaft, 60 max roll diameter, web width
< 60 or > 100.
Solution "OL" - Open Loop Tension Control
The Solution SeriesSolution "OL" Unwind Stand
Suitable when simple monitoring of roll diameter is enough to adjusttension. It is especially economical if the web path will allow for the
A-frame only (without the optional exit roller stand). Base price
includes A-frame, 60 - 100 web width, 40 max roll diameter,steel DynaGrip lug shaft, Re Combiflex pneumatic brake, SP11
safety chucks, one exit roller, and an EP.34 open loop tension
control system.
Options/Upgrades: web guiding, DuraLight carbon fiber lug shaft, 60 max roll diameter, web width
< 60 or > 100, exit roller stand and extra roller.
Solution "CL" - Closed Loop Tension Control
The Solution Series
Solution "CL" Unwind Stand
8/7/2019 Unwind station
12/15
Delivers advanced web tension control with direct measurement and feedback from load cells. Base
price includes 60 - 100 web width, 40 max roll diameter, steel DynaGrip lug shaft, Re
Combiflex pneumatic brake, SP11 safety chucks, load cell stand, 3 exit rollers, and an EP.25 closedloop tension control system with load cells.
Options/Upgrades: web guiding, DuraLight carbon fiber lug shaft, 60 max roll diameter, web width< 60 or > 100.
Unwind Stand Accessories
Double E makes it easy for you to purchase an unwind stand (or rewind stand) with the features you
need. Our expert product managers work with you to specify all the right equipment - then they ensurethat it's all mounted and configured to work together so you don't have to worry.
Core Shafts, safety chucks, brakes, and rollers. Integrated tension control systems with load cells and/or
sensors, shifting actuators for roll positioning - and various other options are available as well.
Safety Chucks
Unique sliding design makes loading and unloading easy, guarantees roll security, and prevents finger
jamming.
Shaft placement is effortless with square-turned-45 (standard) or patented circular jaws for high speeds.
Available sidelay adjustment for alignment and pivot table for baggy edge correction.
Core Shafts
From lightweight carbon fiber lug shafts to simple metal strip shafts, Double E offers any type of core
shaft that you need.
Rollers
8/7/2019 Unwind station
13/15
Low-inertia carbon fiber rollers respond to changes in web speed to minimize web scratching and
stretching. Double E offers a low-cost model which can be close to the cost of a traditional aluminum
roller.
Brakes
Cool-running pneumatic brakesorelectromagnetic powder brakes.
Tension Control
Load cells, tension controllers, ultrasonic sensors, integrated systems
Web Guiding with Shifting Actuator
Shifting actuators are perfect for simple web guiding from a shafted unwind stand. Double E also offers pivot
frames and steering rolls - all featuring the easy-to-use RK31 remote c
Main Features:
High Efficiency Low Initial Investment Low Operating Cost Hight Productivity Good Reliability
Easy Operation and Control
Design Specialities:
1. Tension Control - Uniform web tension maintained through Auto Tension Control device.
2. Impression roller controlled pneumatically through Control Panel, either at each printing station or all station at
a time.
3. Doctor Blade is also pneumatically operated through Control Panel at each printing station.
4. Web alignment uniformly maintained throughtout the printing process by Web Aligner at both input and output
http://www.doubleeusa.com/brakes/pneumatic-brakes.htmhttp://www.doubleeusa.com/brakes/pneumatic-brakes.htmhttp://www.doubleeusa.com/brakes/electromagnetic-powder-brakes.htmhttp://www.doubleeusa.com/brakes/electromagnetic-powder-brakes.htmhttp://www.doubleeusa.com/brakes/pneumatic-brakes.htmhttp://www.doubleeusa.com/brakes/electromagnetic-powder-brakes.htm8/7/2019 Unwind station
14/15
points.
5. Printed substrate throughly dried during passage through Drying Chamber, regulated by temparature controller
for different substrates.
6. Drive through D. C. Motor and Thyristor Convertor control panel for speed regulation.
Standard Working Details:
Maximum Web Width: 1000 mm Printing Cylinder Circumference Range: (Repeat Lengh) 300 to 800 mm
Maximum Machine Speed upto: 150 Mtrs. / min.
Unwind Station:-
http://www.gwjcompany.com/index.php?
main_page=product_info&cPath=86_1412&products_id=2489&zenid=d2b4eb6457fa936c07243ae1fc8cfaf7
http://www.gwjcompany.com/index.php?main_page=product_info&cPath=86_1412&products_id=2489&zenid=d2b4eb6457fa936c07243ae1fc8cfaf7http://www.gwjcompany.com/index.php?main_page=product_info&cPath=86_1412&products_id=2489&zenid=d2b4eb6457fa936c07243ae1fc8cfaf7http://www.gwjcompany.com/index.php?main_page=product_info&cPath=86_1412&products_id=2489&zenid=d2b4eb6457fa936c07243ae1fc8cfaf7http://www.gwjcompany.com/index.php?main_page=product_info&cPath=86_1412&products_id=2489&zenid=d2b4eb6457fa936c07243ae1fc8cfaf78/7/2019 Unwind station
15/15
2) http://www.pelican.in/roto_solo_3.html
http://www.pelican.in/roto_solo_3.htmlhttp://www.pelican.in/roto_solo_3.htmlhttp://www.pelican.in/roto_solo_3.html