POWERHOUSE BACKUP AND RECOVERY FOR IBM i
More reliable than tape with easy web interface
Enhanced protection against ransomware and other data threats includes a “virtual air gap”
Use ViTL tape drive to load when performing D-mode IPL
Works with BRMS, Robot Save or other backup software
Virtual tapes appear as tape media to the iSeries or other host and to BRMS or Robot Save
Supports multiple virtual tape drives assigned to one or more virtual tape libraries
Instantly create users and passwords; quickly assign groups and members
Administrator privileges provides secure access
AES-256 encryption and compression included
Fastest backup for IBM i and fastest recovery speeds
800-444-6283, ext. 1
Technical Specifications
Get A Demo
REQUIREMENTS
IBM Power Systems (iSeries, AS/400, System i, AIX, and Linux)
V5R4 or later of IBM i
Fibre Channel or SAS connection
Complete ViTL solution includes hardware and software with Windows server appliance that connects via Fibre Channel or SAS; or available as software only for your hardware or VM
VIRTUAL TAPE LIBRARY FOR IBM POWER SYSTEMS
ViTL is a virtual tape library solution for IBM Power Systems (iSeries, AS/400, System i, AIX, and Linux)
Emulates an IBM TS3200 tape library (3573-L4U) with extra cartridges
Connects via Fibre Channel or SAS
Compatible with all FC and SAS speeds (FC 2, 4, 8 and 16; SAS 3, 6 and 12GB)
Automated backup and recovery to use in place of a physical tape library
Supports NPIV to emulate multiple devices (tape drives/tape libraries) using a single physical connection
Save backups to local and remote connected disk; including existing NAS, SAN or Deduplication Appliance over CIFS, NFS or iSCSI; and/or backup to the cloud
More options available for more drives and more slots than tape without adding additional hardware
Lower cost than other VTLs; get more cartridges and more drives for one price
Use with standard IBM backup/restore commands
No limit on size of virtual tape files other than available disk space