PROFILE O.S.®g
PROFILE .06®g
PROFILE .04®g
®
3
2
1
Flexible and safeinstrumentation
Simple as
Virtuosityis in your hands
NiTi incomparable flexibility
ProFile® safe design
ProFile® taper may vary between 2 to 8%
• Closely respect the path of the root canal
• Perfectly adapted to a rotating movement in curved canals
• Better eliminationof debris
• Instrument remains centered in the canal thus decreasing the risk of screwing
• The passive tip functions as a guide allowing penetration with a minimum pressure
• Risk of deviation is minimised
• Effective shaping and cleaning
• Easy irrigation
Non cutting tip
U Shape and Radial land
ProFile® features and benefitsDeveloped to be used with Crown Down technique, ProFile® has been designed for practioners who look for a complete instrument line to deal with any type of canal with maximum safety.
The 6 ProFile®Rules• Instrument has to be used 5 to 10 secondsonly at 300 rpm
• Never force onto the file• One or maximum two times up and down is necessaryper file
• Before engaging one file, canal has to be humidifiedwith Glyde™
• Clean your file just after use
• Always start your treamentby a pre op X Ray in orderto determine the working length (Le). UseMaillefer K - Files or C + Files 010 or 015.
ProFile® Settings• ProFile® should be used at a constant and stable speed
between 150 and 350 rpm• Instruments can be used with an independent electric
motor as well as directly on the dental chair unitwith a high gear reduction rate contra angle. In any case, it is highly recommended to use
devices with both speed, and torque controls.
ProFile® range of instruments
#2 (6%-30)
6% - 256% - 204% - 254% - 20
6% - 306% - 254% - 304% - 25
6% - 356% - 304% - 354% - 30
4% - 204% - 25
4% - 254% - 30
4% - 304% - 35
#3 (6%-40) #4 (7%-50)#3 (6%-40) #4 (7%-50) #5 (8%-60)
6% - 20 6% - 25 6% - 30
< Le –3mm
< Le –3mm
Le
–
ProFile®O.S.(Orifice Shapers)
ProFile®.06
ProFile®.04
ProFile®.02
• used for preparing the coronal section or for removinggutta percha and sealer in the case of retreatment
• taper 5 to 8 % – number 1 to 6 (20 to 80) • ProFiles O.S. carry 3 colored rings
• used for preparing curved terminal part• taper 2% – number 15 to 40 • .02 ProFiles carry 1 colored ring
• used for preparing the terminal part of the canal• taper 4% – number 15 to 90 • .04 ProFiles carry 1 colored ring
• used for preparing the median canal zone• taper 6% – number 15 to 40 • .06 ProFiles carry 2 colored rings
Each canal has its own sequence
Small canal Medium canal Large canal Approximativeworking length
Orifice shapingProFile® O.S.
Crown-Down
Exact workinglength determination
Apical finishing
Final flaringif necessary
and larger .04 ProFile®
if necessaryand larger .04 ProFile®
if necessaryand larger .04 ProFile®
if necessary
and larger .06 ProFile®
if necessaryand larger .06 ProFile®
if necessaryand larger .06 ProFile®
if necessary
K-Files or C+Files 010-015
15mm 19mm
15mm 18/21/25mm
18(15-40)/21/25/31mm
21/25mm
15mm
13mm
REF A 0359
REF A 0345
REF A 011N
REF A 0344
6x
6x
6x
6x
#1-6
#15-40
#15-90
#15-40
REF A 0902
REF A 219P
REF A 0905
REF A 1409
135
135
ProFile®, a complete line of instruments
REF A 0362 - 1 empty
REF A 0362 - 225 mm
MANDREL
AccessoriesGLYDE™ FILE PREP Intro Package GLYDE™COMPULSE
NITI manual handle adaptorsfor manual use of ProFile®
ORGANIZER
ASSORTMENT
PROFILE ® 0.S.
PROFILE ® .06Taper .06
PROFILE ® .04Taper .04
PROFILE ® .02Taper .02
Orificeshaping
Shaping and final flaring
Shaping and apical preparation
Apicalhook
Refills Assortment
or<< >>
Tech
nica
l mod
ifica
tions
on
our p
rodu
cts
are
not s
ubje
ct to
not
ifica
tions
. Pho
tos
of o
ur in
strum
ents
are
not c
ontra
ctua
l
0459 Dentsply Maillefer • CH-1338 Ballaigues • Switzerland • www.dentsplymaillefer.com IFY/F19 02 21.E/10/1998 - updated 08/2007