Visit Crimpsource at www.parker.com/crimpsource, your online resource for hose crimp specifications.
Equipment C
C-2 Hose Products Division
Wickliffe, Ohio
EquipmentCatalog 4400 US
A
B
A
C
D
E
Hose Cut-Off Machine
239 and 339 C-23
Visual Index
Conversion Kits C-22
Karrykrimp 2 C-10
Karrykrimp 2 Bench Mount C-10 Parkrimp 2 C-12 Minikrimp C-14
Karrykrimp Bench Mount C-8Karrykrimp C-8
p 2
332T-115V C-23
Hose Cut-Off Machine
Crimpsource C-17Portable Pumps C-16 Parkrimp and Twin-Tough Instructions C-18-21
C-3 Hose Products Division
Wickliffe, Ohio
Catalog 4400 US Equipment
B
A
C
D
E
Visual Index
TH11-1 C-26
Hose Cut-Off Tool
TH9-1 C-26
Hose Insertion Depth Blocks
TH2-7 C-27
Fittings Push-On Stand
432-115V C-27
Hozembler
80C-0DR and 83C-0DR C-27
Die Storage Racks
631075 C-23
Karrykut - Hose Cut-Off Machine
881540 C-26
Push-Lok Cut-Off & Assembly Tool
871522 C-26
Handycut - Hose Cut-Off Machine
80C-SDR C-27
Swivel Die Rack
652200 C-28
Mandrel Tool Kit - 22 Series
652201 C-28
Assembly Tools - 22 Series
TH2-7M25-6, TH2-7M25-8 C-28
Mandrels - 25 Series
2727 and 2726 C-28
Mandrel Tool Kit - 23 Series
Hose Cut-Off Machine C-23
TH3-51
TH6-10-HL-9-2 C-24
Ultra Clean Hose Cleaning Kit
TH6-10-EL-7 C-24
Economy Hose Cleaning Kit
601069 C-29
Hose Perforator
Hose Oil C-29
Hose Oil
A
B
A
C
D
E
C-4 Hose Products Division
Wickliffe, Ohiowww.parkerhose.com
EquipmentCatalog 4400 USVisual Index
Lubricant C-29
Accrolube - High Efficiency
Small Crimper Hood C-29 Large Crimper Hood C-29
B
A
C
D
E
C-5 Hose Products Division
Wickliffe, Ohiowww.parkerhose.com
Catalog 4400 US EquipmentNotes
A
B
A
C
D
E
C-6 Hose Products Division
Wickliffe, Ohiowww.parkerhose.com
EquipmentCatalog 4400 USParkrimp System
Hose Assemblies Are Easy With the Parkrimp System.
in e it int u ti n int e imp mi impinm ine e t e in u t ine e u e n u e u i it
When it comes to hoseassemblies, no one puts it all together like Parker. From high-volume productivity to portable on-site assembly, we offer a variety of crimping machines, No-Skive hoses, and No-Skive
With Parkrimp equipment, anyone can make factory- quality hose assemblies quickly, easily, and cost effectively. Parkrimp machines are simple to operate andthey’re built to provide years of dependable service. Seven Parkrimp models – an entire family of crimpers – areavailable to meet your bench-mounted or portable needs, crimping straight or bent-stem
-eter. Just use our No-Skive
leak-free hose assemblies whenever and wherever you need them.
The complete system from one source: No-Skive hose,
machines with worldwide availability and service.
Eight segment crimp dies provide a smooth, even, 360-degree crimp.
Bottom-loading operation makes it easy to handle long hose assemblies.
Parker’s exclusive Parkalign™ feature
in the dies perfectly every time.
Our linked crimp dies keep die segments together. No loose parts to mismatchor misplace.
Dies are color-coded by size for easy
reduced set-up time.
With Parkrimp,
full length crimp.
No-Skive hoses and
the Parkrimp system to create high quality, reliable hydraulic hose assemblies every time. makes routing hose
assemblies easy.
service.
B
A
C
D
E
C-7 Hose Products Division
Wickliffe, Ohiowww.parkerhose.com
Parkrimp SystemCatalog 4400 US Equipment
e e u ti i i n eu ine impin
e ie in u inn e i n it
inet utpu n t e ie
n m n et it
e
i e
ieit
e
e ieie e ie ie e ie ie
e ieie
e ieie
e ieie
e ieie e
i e
ieit
e
e ieie
i e i e i e i e i e i e i e
E N/A N/A N/A N/A N/A
E N/A N/A N/A N/A N/A
E N/A N/A N/A
E N/A N/A N/A
E N/A N/A N/A N/A
EE N/A
N/A
E N/A N/A
E N/A N/A
EE N/A N/A
E mp eHose 451TC-4Fitting 43 SeriesDie Body Color SilverDie Cavity Color (-4) E
e e tin t e i t ieOnce the proper Parker Hose and Fitting is selected that meets your application requirements, you will need to select the proper die toassemble them together.
Based on the hose size
the proper color coded die, as called out in the chart below.
Based on the Parkrimp machine being used to assemble the hose and
numbers and tooling selection for your assembly can be found in Section C of this catalog.
For general hose assembly instructions for all Parkrimp machines, please turn to pages C-18 and C-19. (An instructional video is a standard part of each Parkrimp machine shipped from the manufacturer.)
C-8 Hose Products Division
Wickliffe, Ohio
EquipmentCatalog 4400 US
A
B
A
C
D
E
EquipmenttKarrykrimp and Karrykrimp Bench Mount
The Karrykrimp is now available in a modular design with all the familiar Parkrimp Systemadvantages.
The same unit now offers portability and bench mountability.
te• For crimp instructions, see pages C-18 and C-19.• Hose assemblies must be inspected for cleanliness and free of all foreign particles.
p i it
e tu e• Portable, compact rugged design• Numerous portable power unit options available• Pivoting pusher design for easy die change out
crimped
• Reference page C-16 for information on available power units
imp imp en unt
t n Equipmentt um e n i i u
e ipti n t um eCrimp Head 82C-CHDBench Power Unit Assembly 85C-1PHSilver die ringBlack die ringHose AssemblyStand Assembly 85C-STD
p i it
e tu e• Faster cycle times on bench mounted units• Pivoting pusher design for easy die change out• Compact bench mount design
crimped
• Weight: 146 lbs
• Hydraulic Fluid: AW32 oil
-
• te
-ate at alternate voltage.
C-9 Hose Products Division
Wickliffe, Ohio
Catalog 4400 US Equipment
B
A
C
D
E
Karrykrimp and Karrykrimp Bench Mount Crimp Information
HOSE -4RED
-5PUR
-6YEL
-8BLU
-10ORG
-12GRN
-16BLK
-20WHT
DieRing
Die Part Number 80C-A04 80C-A05 80C-A06 80C-A08 80C-A10 80C-A12 80C-A16 80C-A20
0.6450.665
0.7100.730
0.8250.845
0.9450.965
1.0601.080
1.2451.265
1.5901.610
1.9701.990 SILVER
0.6850.705
0.7500.770
0.8650.885
0.9851.005
1.1001.120
1.2851.305
1.6301.650
2.0102.030 BLACK
Die Part Number 80C-E04 80C-E05 80C-E06 80C-E08 80C-E10 80C-E12 80C-E16
0.4600.480
0.5200.540
0.5750.595
0.6700.690
0.8050.825
0.9150.935
1.1751.195 SILVER
0.5000.520
0.5600.580
0.6150.635
0.7100.730
0.8450.865
0.9550.975
1.2151.235 BLACK
Die Part Number 80C-V12 80C-V16 80C-V20
1.1551.175
1.4501.470
1.7401.760 SILVER
Die Part Number 80C-H585 80C-H735 80C-H840 80C-H970 80C-H1120
AX0.5750.595
0.7250.745
0.8300.850
0.9600.980
1.1101.130
SILVERDie Part Number 80C-H605 80C-H775 80C-H885 80C-H1010 80C-H1170
BXX0.6350.655
0.8050.825
0.9150.935
1.0401.060
1.2001.220 BLACK
Die Part Number 80C-H595 80C-H735 80C-H860 80C-H1015 80C-H1170 80C-H1365
0.5750.595
0.7200.740
0.8600.880
0.9951.015
1.1401.160
1.3501.370 SILVER
Caution: Read the operations and technical manual before attempting to operate this machine. Do not operate this machine without guard in place. Keep hands clear of moving parts when operating machine.
Note: Do not use this machine to assemble 341-20,451TC-20, 451ST-20, 472TC-20 or any size stainlesssteel fittings.
For a new Decal, contact Parker at: 1-800-C-PARKER or print your own at www.parker.com/crimpsource. Decal Part Number: 82C-CRIMPDECAL REV. A
HY
Ser
ies
Fitt
ing
Ser
ies
81S
erie
s26
Ser
ies
43S
erie
sParker Hannifin CorporationHose Products Division30240 Lakeland Blvd.Wickliffe, Ohio 44092
Karrykrimp/Karrykrimp Bench MountHose Die Selection Chart
351TC/ST422424426
431436
451TC/ST471TC/ST
472TC / LT482TC/ST
722TC / LT (-6, -8, -10 ONLY)
421WC302/301301LT
304341381
601604881
213 285 293
201206
221FR
225244266
SS25UL
811 811HT 881
611HT 801 836
Hose Products Division
Wickliffe, Ohio
EquipmentCatalog 4400 US
A
B
A
C
D
E
The Karrykrimp 2 is now available in a modular design with all the familiar Parkrimp Systemadvantages.
The same unit now offers portability and bench mountability.
te• For crimp instructions, see pages C-18 and C-19.• Hose assemblies must be inspected for cleanliness and free of all foreign particles.
p i it
e tu e• Faster cycle times on bench mounted units• Pivoting pusher design for easy die change out• Compact bench mount design
• Hydraulic Fluid: AW32 oil
• te -
can be rewired by a
alternate voltage.
EquipmentCatalog 4400 USKarrykrimp 2 and Karrykrimp 2 Bench Mount
p i it
e tu e• Portable, compact rugged design• Numerous portable power unit options available• Pivoting pusher design for easy die change out
• Reference page C-16 for information on available power units
imp imp en unt
pti n in• Die Kit (85C-KDA)
.
t n Equipmentt um e n i i u
e ipti n t um eCrimp Head 85C-CHDBench Power Unit Assembly 85C-1PHSilver die ringBlack die ringHose AssemblyStand Assembly 85C-STD
C-11 Hose Products Division
Wickliffe, Ohio
Catalog 4400 US Equipment
B
A
C
D
E
Karrykrimp 2 & Karrykrimp 2 Bench Mount Crimp Information
HOSE -4RED
-5PUR
-6YEL
-8BLU
-10ORG
-12GRN
-16BLK
-20WHT
DieRing
Die Part Number 80C-A04 80C-A05 80C-A06 80C-A08 80C-A10 80C-A12 80C-A16 80C-A20
0.6450.665
0.7100.730
0.8250.845
0.9450.965
1.0601.080
1.2451.265
1.5901.610
1.9701.990 SILVER
0.6850.705
0.7500.770
0.8650.885
0.9851.005
1.1001.120
1.2851.305
1.6301.650
2.0102.030 BLACK
Die Part Number 83C-D06 83C-D08 83C-D10
701F42 (-8 Only)
0.9901.010
1.1401.160
1.2601.280 BLACK
Die Part Number 83C-D06 83C-D08 83C-D10 83C-D12 83C-D16 83C-D20
0.9500.970
1.1001.120
1.2201.240
1.3551.375
1.6951.715
2.0252.045 SILVER
Die Part Number 80C-L12 80C-L16
7311.4201.440
1.7301.750 SILVER
Die Part Number 80C-CS08 80C-CS10 80C-CS12
787TC797TC
0.9300.950
1.0571.077
1.2451.265 BLACK
Die Part Number 80C-L12 80C-L16
1.4201.440
1.7301.750 SILVER
Die Part Number 80C-Y06 80C-Y08
2710.6800.700
0.8250.845 SILVER
Die Part Number 80C-E04 80C-E05 80C-E06 80C-E08 80C-E10 80C-E12 80C-E16
0.4600.480
0.5200.540
0.5750.595
0.6700.690
0.8050.825
0.9150.935
1.1751.195 SILVER
0.5000.520
0.5600.580
0.6150.635
0.7100.730
0.8450.865
0.9550.975
1.2151.235 BLACK
Die Part Number 80C-V12 80C-V16 80C-V20
1.1551.175
1.4501.470
1.7401.760 SILVER
Die Part Number 80C-H585 80C-H735 80C-H840 80C-H970 80C-H1120 80C-H1365
AX0.5750.595
0.7250.745
0.8300.850
0.9600.980
1.1101.130
1.3551.375
SILVERDie Part Number 80C-H605 80C-H775 80C-H885 80C-H1010 80C-H1170 80C-H1465 80C-H1880
BXX0.6350.655
0.8050.825
0.9150.935
1.0401.060
1.2001.220
1.4951.515
1.9101.930 BLACK
Die Part Number 80C-H595 80C-H735 80C-H860 80C-H1015 80C-H1170 80C-H1365
0.5750.595
0.7200.740
0.8600.880
0.9951.015
1.1401.160
1.3501.370 SILVER
Caution: Read the operations and technical manual before attempting to operate this machine. Do not operate this machine without guard in place. Keep hands clear of moving parts when operating machine.
Note: Stainless steel crimp diameters are 0.010” greaterthan table listings with the exception of HY series whichare 0.005” greater than table listings.
For a new Decal, contact Parker at: 1-800-C-PARKER or print your own at www.parker.com/crimpsource. Decal Part Number: 85C-CRIMPDECAL REV. A
HY
Ser
ies
Fitt
ing
Ser
ies
81S
erie
s26
Ser
ies
43S
erie
sParker Hannifin CorporationHose Products Division30240 Lakeland Blvd.Wickliffe, Ohio 44092
Karrykrimp 2/Karrykrimp 2 Bench MountHose Die Selection Chart
70S
erie
s71
Ser
ies
73S
erie
s77
Ser
ies
78S
erie
s
351TC/ST 422 424 426
431 436
451TC/ST471TC/ST
472LT472TC
482TC/ST722LT
421WC302
301LT
304341381
601604881
711721
721TC
721ST722LT772TC
772ST774
781 782TC 782ST
722ST / TC / LT
213 285 293
25S
erie
s
811 811HT 881
201206
221FR
225244266
SS25UL
611HT 801 836
C-12 Hose Products Division
Wickliffe, Ohio
EquipmentCatalog 4400 US
A
B
A
C
D
E
te• For crimp instructions, see pages C-18 and C-19.• Hose assemblies must be inspected for cleanliness and free of all foreign particles.
t n Equipmentt um e n i i u
e ipti n t um eParkrimp 2 crimper head assemblyParkrimp 2 stand as-
Hz power unit
Parkrimp 2 stand
Hz power unitAdapter bowl 83C-OCBSpacer ringSpacer PlateDie Kit
83C-KDA
EquipmentCatalog 4400 USParkrimp 2
p i it
e tu e
• Weight: 842 lbs (Head is 558 lbs and base is 284 lbs)
imp
C-13 Hose Products Division
Wickliffe, Ohio
Catalog 4400 US Equipment
B
A
C
D
E
Parkrimp 2 Crimp Information
HOSE -4RED
-5PUR
-6YEL
-8BLU
-10ORG
-12GRN
-16BLK
-20WHT
-24RED
-32GRN
Die Part Number 80C-A04 80C-A05 80C-A06 80C-A08 80C-A10 80C-A12 80C-A16 80C-A20 80C-A24 80C-A32
0.6450.665
0.7100.730
0.8250.845
0.9450.965
1.0601.080
1.2451.265
83C-A16H 83C-A20H2.2902.310
2.7352.755
1.5901.610
1.9701.990
Tooling Required
0.6850.705
0.7500.770
0.8650.885
0.9851.005
1.1001.120
1.2851.305
1.6301.650
2.0102.030
2.3302.350
2.7752.795
Tooling Required
Die Part Number 83C-D06 83C-E08 83C-D10
701F42 (-8 Only)
0.9901.010
1.1401.160
1.2601.280
Tooling Required
Die Part Number 83C-D06 83C-E08 83C-D10 83C-D12 83C-D16 83C-D20 83C-D24 83C-D32
0.9500.970
1.1001.120
1.2201.240
1.3551.375
83C-D16H 83C-D20H2.2902.310
2.7752.795
1.6951.715
2.0252.045
Tooling Required
Die Part Number 83C-L12 83C-L16 83C-L20 83C-L24 83C-L32
7311.4201.440
1.7301.750
2.1402.160
2.4402.460
3.0253.045
Tooling Required
Die Part Number 83C-U12 83C-U16
7611.5401.560
1.8651.885
Tooling Required
Die Part Number 80C-CS08 80C-CS10 80C-CS12 83C-CS16 83C-CS20
787TC797TC
0.9300.950
1.0571.077
1.2451.265
1.5411.561
1.9701.990
Tooling Required
Die Part Number 83C-L12 83C-L16 83C-L20 83C-L24 83C-L32
1.4201.440
1.7301.750
2.1402.160
2.4402.460
3.0253.045
Tooling Required S6 Series Fittings are used on P35-32 Hose Only
Die Part Number 83C-L12 83C-L16 83C-L20 83C-L24 83C-L32
1.4201.440
1.7301.750
2.1402.160
2.4402.460
3.0253.045
Tooling Required
Die Part Number 80C-Y06 80C-Y08
2710.6800.700
0.8250.845
Tooling Required
Die Part Number 80C-E04 80C-E05 80C-E06 80C-E08 80C-E10 80C-E12 80C-E16 80C-E20 80C-E24 80C-E32
0.4600.480
0.5200.540
0.5750.595
0.6700.690
0.8050.825
0.9150.935
1.1751.195
1.4201.440
1.6701.690
2.1602.180
Tooling Required
0.5000.520
0.5600.580
0.6150.635
0.7100.730
0.8450.865
0.9550.975
1.2151.235
1.4601.480
1.7101.730
2.2002.220
Tooling Required
Die Part Number 80C-V12 80C-V16 80C-V20 83C-V24 83C-V32
811 811HT 8811.1551.175
1.4501.470
1.7401.760
2.0102.030
2.4302.450
Tooling Required
Die Part Number 80C-H585 80C-H735 80C-H840 80C-H970 80C-H1120 80C-H1365
AX0.5750.595
0.7250.745
0.8300.850
0.9600.980
1.1101.130
1.3551.375
Tooling Required
Die Part Number 80C-H605 80C-H775 80C-H885 80C-H1010 80C-H1170 80C-H1465 80C-H1880
BXX0.6350.655
0.8050.825
0.9150.935
1.0401.060
1.2001.220
1.4951.515
1.9101.930
Tooling Required
Die Part Number 80C-H595 80C-H735 80C-H860 80C-H1015 80C-H1170 80C-H1365
611HT 801 8360.5750.595
0.7200.740
0.8600.880
0.9951.015
1.1401.160
1.3501.370
Tooling Required
Caution: Read the operations and technical manual before attempting to operate this machine. Do not operate this machine without guard in place. Keep hands clear of moving parts when operating machine.
Note: Stainless steel crimp diamters are 0.010” greater than table listings with the exception of HY series which are 0.005” greater than table listings. Do not use lubricant to assemble spiral hose and fittings.
For a new Decal, contact Parker at: 1-800-C-PARKER or print your own at www.parker.com/crimpsource. Decal Part Number: 83C-CRIMPDECAL REV. B
Fitt
ing
Ser
ies
70S
erie
s43
Ser
ies
Parker Hannifin CorporationHose Products Division30240 Lakeland Blvd.Wickliffe, Ohio 44092
Parkrimp 2Hose Die Selection Chart
71S
erie
s73
Ser
ies
76S
erie
s77
Ser
ies
78/S
6S
erie
s79
Ser
ies
26S
erie
s81
Ser
ies
HY
Ser
ies
83C-R12 Split Die ringis used for all crimpingoperations
80C-xxx/83C-xxx small diesand 83C-OCB adapter bowlused on sizes -4 thru -20
83C-R02 Spacer Ringused with adapter bowlwhen called out above
83C-R02H Spacer Plateused when called outabove
83C-xxx Largedies used on sizes-16 thru -20
351TC351ST
422 424 426
431 436
451TC451ST471TC
471ST 472TC472LT482TC482ST
421WC302
301LT
304341381
601604881
722ST / TC / LT (-6 THRU -20 ONLY)
722ST / TC / LT (-24 and -32 Only)
711721
721TC
721ST772TC
772ST774
P35 781782TC
782ST
791TC792LT
792TCF42
792ST
213 285 293
25S
erie
s
201206
221FR
225244266
SS25ULSS23CG
C-14 Hose Products Division
Wickliffe, Ohio
EquipmentCatalog 4400 US
A
B
A
C
D
E mp t nt
Division products. Refer to Crimpsource™ on crimpsourcethe complete line of Parker crimping machines).Any engineering and crimper performance issues pertaining to
EquipmentCatalog 4400 USMinikrimp™
te• For crimp instructions, see pages C-18 and C-19.• Hose assemblies must be inspected for cleanliness and free of all foreign particles.
ini imp
t n Equipment
t um e n i i ut
e ipti n um eBase unitHand pumpAir over hydraulic pump kit with tubing and adaptersSilver die ring
pti n in•
p i it
e tu e
• Handpump or air over hydraulic design• Removable pusher design for easy die change out• Reference page C-16 for information on available power units
• Weight: 42 lbs (with hand pump)
C-15 Hose Products Division
Wickliffe, Ohio
Catalog 4400 US Equipment
B
A
C
D
E
Minikrimp Crimp Information
HOSE -4RED
-5PUR
-6YEL
-8BLU
-10ORG
-12GRN
-16BLK
DieRing
Die Part Number 80C-A04 80C-A05 80C-A06 80C-A08 80C-A10 80C-A12 80C-A16
0.6450.665
0.7100.730
0.8250.845
0.9450.965
1.0601.080
1.2451.265
1.5901.610 SILVER
0.6850.705
0.7500.770
0.8650.885
0.9851.005
1.1001.120
1.2851.305
1.6301.650 BLACK
Die Part Number 80C-E04 80C-E05 80C-E06 80C-E08 80C-E10 80C-E12 80C-E16
0.4600.480
0.5200.540
0.5750.595
0.6700.690
0.8050.825
0.9150.935
1.1751.195 SILVER
0.5000.520
0.5600.580
0.6150.635
0.7100.730
0.8450.865
0.9550.975
1.2151.235 BLACK
Die Part Number 80C-V12 80C-V16
1.1551.175
1.4501.470 SILVER
Die Part Number 80C-H585 80C-H735 80C-H840 80C-H970 80C-H120
AX0.5750.595
0.7250.745
0.8300.850
0.9600.980
1.1101.130
SILVERDie Part Number 80C-H605 80C-H775 80C-H885 80C-H1010 80C-H1180
BXX0.6350.655
0.8050.825
0.9150.935
1.0401.060
1.2001.220 BLACK
Die Part Number 80C-H595 80C-H735 80C-H860 80C-H1015 80C-H1170 80C-H1365
0.5750.595
0.7200.740
0.8600.880
0.9951.015
1.1401.160
1.3501.370 SILVER
Caution: Read the operations and technical manual before attempting to operate this machine. Do not operate this machine without guard in place. Keep hands clear of moving parts when operating machine.
Note: Do not use this machine to assemble stainless steel fittings with any hose listed onthis chart.
For a new Decal, contact Parker at: 1-800-C-PARKER or print your own at www.parker.com/crimpsource. Decal Part Number: 800C-CRIMPDECAL REV. A
HY
Ser
ies
Fitt
ing
Ser
ies
81S
erie
s26
Ser
ies
43S
erie
sParker Hannifin CorporationHose Products Division30240 Lakeland Blvd.Wickliffe, Ohio 44092
MinikrimpHose Die Selection Chart
351TC/ST422424426
431436
451TC/ST471TC/ST
472TC472LT
482TC/ST
421WC302/301301LT
304341381
601604881
722ST / TC / LT (-6, -8, -10 ONLY)
213 285 293
201206
221FR
225244266
SS25UL
811 811HT 881
611HT 801 836
A
B
A
C
D
E
C-16 Hose Products Division
Wickliffe, Ohiowww.parkerhose.com
EquipmentCatalog 4400 USPortable Pumps
n ump
Weight: 61 lbs
E e t i ump
cycle time
Weight: 59 lbs
e i e tte
Part No. 85C-12V
Weight: 67 lbs
i u i ump
Weight: 14 lbs
E e t i ump
Weight: 31 lbs
n ump
Weight: 9 lbs
mpe e ump
Ene p nt t tement
B
A
C
D
E
C-17 Hose Products Division
Wickliffe, Ohiowww.parkerhose.com
Catalog 4400 US EquipmentCrimpsource
p e m imp u e
Crimpsource is the industry's most complete resource for
thermoplastic hose:• Crimp specs• PDFs of technical manuals for easy downloading• Parts lists• Troubleshooting advice• PDFs of crimper decals for immediate printing
necessary to correctly fabricate a factory quality hose assembly.
need quickly and easily.
or crimper decal.
imp u e pe e
int u n imp eene e u nee t
imp u e me e
C-18 Hose Products Division
Wickliffe, Ohio
EquipmentCatalog 4400 US
A
B
A
C
D
E
Parkrimp Assembly Instructions
Mark the hose insertion depth and push hose into fitting until the mark on the hose is even with the end of the shell.
however, u i te iu in pi e See Hose
Place shell onto end of hose and make sure the end of the shell
-tion Depth mark.
Push hose onto the 88 Series fitting until the shell bottoms against the fitting’s
necessary.
Position the hose and fitting in dies from below.Rest bottom of coupling on die step using the ® feature.
26 SeriesParkrimp Series 81 Series
C g g a a o t a a a o t
Pull pin at the top of pusher to swing it back. Place unitized die-train into base plate. See decal on crimper for proper die set.
te impe n t e
pin t t e t pt e pu emp t nt
crimper’s die bowl using a premium quality lithium-base grease.
Color-Coded Unitized Die-Train
Place correct die ring on top of the dies. See decal on crimper for proper die ring.
Position pusher by replacing the pin and operate pump until the die ring bottoms out. Release pressure within the pump — remove finished assembly.
te Minikrimp, Karrykrimp & Karrykrimp 2 have several types of power sources, all of which are separate units from the crimping machine.
For 81 Series Shells with 88 Series Fittings
2 n e t uniti e ie t in
4 e ie in n imp
5 e u e imp i mete
Parkrimp Fittings Series 25, 26, 43, 70, 71, 73, 76, 78, S6, 81, HY
StandardParkrimp Series
26 Series
CrimpDiameter
Measure crimp diameter on the flat surfaces of the crimped shell, referenced in the illustration to the left. Reference decal on crimper for crimp diameters. Never use hose assemblies with incorrect crimp diameters.
mp t nt Hose assemblies must be inspected for cleanliness and free of all foreign particles.
TM
e in e ti n ept
FittingSize
Fitting Series
inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm-4 — — 21 21 — — — — — — — — — — — — — — — — 37-5 — — 21 24 — — — — — — — — — — — — — — — — — —-6 22 21 29 27 27 — — — — — — — — — — — —-8 22 21 33 33 32 — — 1.36 34.6 — — — — — — — —
— — 22 35 33 — — 1.53 38.9 47 — — — — — —-12 — — 22 38 38 37 48 1.78 45.2 48 — — 56 29-16 — — 1 25 44 46 44 2 51 2.13 54.1 2 51 — — 59 32 43
— — 1 25 48 44 46 64 2.51 63.8 64 — — 71 33 — —-24 — — 27 37 — — 59 62 — — 62 — — — — 33 — —-32 — — 32 46 — — 62 71 — — — — 88 — — 43 — —
1
3
C-19 Hose Products Division
Wickliffe, Ohio
Catalog 4400 US Equipment
B
A
C
D
E
Parkrimp Assembly Instructions
Pull the valve handle forward to bring the pusher down for crimping. When the split die ring con-tacts the base plate, the crimp is complete. Push the valve handle back to lift the pusher, open the dies, and release the finished assembly.
te You do not have to remove any tooling to insert or remove straight fittings. The front half of the split die ring and the front die train must be removed to insert and remove bent tube fittings.
With the pusher in the full up position, lift the back half of the split die
position by pushing the slide pin in. (The slide pin is located inside the pusher at the back.)
premium quality lithium-base grease. Carefully insert the adapter bowl, 83C-OCB, into the base bowl. The adapter bowl must be tilted toward the back of the crimper during insertion.
SlidePin
quality lithium-base grease. Place unitized die-train into the adapter bowl. Select die and die ring by hose size and type. See decal on crimper for proper die set.
te Die sets have color-coded cavities indicat-ing size and have the fitting series and dash size stamped on the top.
-er ring on locating step of adapter bowl. Refer-ence decal on crimper for tool selection.
set into the die bowl. (The die sets are in two halves of four dies each. Place one half in the back and one half in the front to accommodate bent tube fittings.) Reference decal on crimper for proper tool selection.
split die ring onto the dies by pulling the slide pin forward.
SlidePin
split die ring aligning the pins in the back half with the hole in the front half.
C g g S a a
1For 81 Series Shells with 88 Series Fittings
2a u in e t pie e ie
2b u in m uniti e ie
Color-Coded Unitized Die-Train
Parkrimp Fittings Series 25, 26, 43, 70, 71, 73, 76, 78, S6, 81, HY
3 e p e in
mp t nt Hose assemblies must be inspected for cleanliness and free of all foreign particles.
StandardParkrimp Series
26 Series
CrimpDiameter
26 SeriesParkrimp Series 81 Series
Mark the hose insertion depth and push hose into fitting until the mark on the hose is even with the
if necessary, however, u i te i u in pi e
on previous page.
Place 81 Series Shell onto end of hose and make sure the end of the shell lines up with
mark.
Push hose onto the 88 Series fitting until the shell bottoms against the fitting’s
necessary.
Position the hose and fitting in dies from below. Rest bottom of coupling on die step using the ® feature.
5
6 imp e
4 iti n t e p it ie in
Measure crimp diameter on the flat surfaces of the crimped shell, referenced in the illustration to the right. Reference decal on crimper for crimp diam-eters. Never use hose assemblies with incorrect crimp diameters.
7 e u e imp i mete
SlidePin
Hose Products Division
Wickliffe, Ohio
EquipmentCatalog 4400 US
A
B
A
C
D
E
Set-up:Position thebonded rubberhose so that itlies flat on a worksurface withouttendency to twistor turn.
Measure hose tearback length: Measureand mark the length that thehoses are to be separated.A minimum of 12 inches isrequired for crimping thehose ends. A 24 inch tearback is recommended for usewith hydraulic tools.
A.) Using a sharp blade,pierce the center of the valley (web) formed by the hoses.
B.) To start the cut, place the blade in the center of that valley (web) drawing the knife with constant pressure.
C-21 Hose Products Division
Wickliffe, Ohio
Catalog 4400 US Equipment
B
A
C
D
E
Stopping Separation: Parker recommendsinstalling a heat shrink sleeve of at least 2 inches in length at the termination of the separated hose to provide protection against tearing of the valley (web) or hose covers. This heat shrink sleeve should be placed on the hose assembly prior to the crimp-ing of the hose fittings. Once you have your heat shrink sleeve in place, use a heat gun to shrink the sleeve in place.
Measure Separation: It is suggested that the separation length be at least 12 inches, so the crimping operation can be accomplished without risk of kinking the hoses.
Crimping Fittings: All of your crimping information can be found on Crimpsource (www.parker.com/crimpsource).
C-22 Hose Products Division
Wickliffe, Ohio
EquipmentCatalog 4400 US
A
B
A
C
D
E
Conversion Kits
teiti n in m ti n n pe tin in t u ti n i it t e e e u t i i i n e ite t p e e m
impin in t u ti n ee p e ne em ie mu t e in pe te e n ine n ee ei n p ti e
u i e it
• Required Width of Bowl Diameter: 5 inches
t n Equipmentt um e n i i u
e ipti n t um eBowl Assembly
Pusher
Silver Die Ring
Black Die Ring
e t e e n e i n itFor use with 26, 43, 81 and HY Series Fitting
Convert at a 400 to utilize Parker Parkrimp
t n Equipmentt um e n i i u
e ipti n t um eBowl Assembly
Pusher
Silver Die Ring
Black Die Ring
te n e i n itFor use with 26, 43, 81 and HY Series Fitting
Convert at 0 0 a 0 otto loa g to utilize Parker
t n Equipmentt um e n i i u
e ipti n t um eBowl Assembly
Silver Die Ring
Black Die Ring
C-23 Hose Products Division
Wickliffe, Ohio
Catalog 4400 US Equipment
B
A
C
D
E
Cut-Off Machines
e ut inePart No. 332T-115V
e tu e
• Moving parts shielded by guards
• Shipping Weight: 71 lbs.
t n Equipmentt um e n i i u
e ipti n t um e
phase electic motor wired for 115VScallop Cutting Blade 24398
pti n Equipment
e ut inePart No. 239 and 339
e tu e• Designed for heavy duty use• Cuts multi-braided wire reinforced hose including 6 spiral
• Shipping Weight: 115 lbs.
t n Equipmentt um e n i i u
e ipti n t um e
single phase motorHose Cut-Off Machine with 3 HP
arbor size) 24248
pti n Equipment
e ut ineut
e tu e• Portable saw for cutting on the job• Unique clamp system spreads hose as it
cuts to prevent blade binding• Cuts multi-braided wire reinforced hose
including 4 spiral
• Shipping Weight: 58 lbs.
t n Equipmentt um e n i i u
e ipti n t um ePower saw with 115volt (13 amp) universal AC motorUniversal clamp attachment (can be used with any portable power saw
capacity
e ut inePart No. TH3-51
e tu e
• Front plate with useable pins easily holds in place for a straight cut
• Clear face shield
dedicated circuit is recommended)
• Shipping weight - 67 lbs.
t um e
C-24 Hose Products Division
Wickliffe, Ohio
EquipmentCatalog 4400 US
A
B
A
C
D
E
Ultra Clean Hose Cleaning Kit
t e n e e nin it
e tu e
pipe• The launcher is supplied with a Full-Flow Quick
° Rotary Plug for
• Unique Safety Release Bar that locks the faceplate
i equi ement
suggested
E n m it e tu e
or pipe• Has a quarter-turn locking ring for easy nozzle
change and projectile loading• The launcher is constructed of durable brass and
aluminum internals, strong plastic handle, and
its size and portability
i equi ement
suggested
pti n Equipment e ie
• A range of projectiles are available enabling the Ultra Clean System to be used on different sizes and types
t
E n m e e nin it
t E
C-25 Hose Products Division
Wickliffe, Ohio
Catalog 4400 US Equipment
B
A
C
D
E
Ultra Clean Hose Cleaning Kit
E
e i ee ti e
e t um e t um ee i ee ie ti ee ti eee tiee te ti etiti eti e
e t um ee t um t umtt um
E
i ee ti e
e t um e t um ei eiie ti ee ti eee tiee te titi etiti eti e
e t um ee t um t umtt um
E
i ee ti e
e t um e t um eiiie ti ee ti eee tiee tiee te titi etiti eti e
e t um ee t um t um ett m
E e n e
n e i ee ti e
e t um e t um eiiiie ti ee ti eee ti eeee te tititi eti e
e t ume t u em t um ett um
E E Ee t
um e e ipti n te tee te ttt
um euumum eumm eee e ipti ne ipti neee iipiptptiptipti nn tttt
t e n e e nin iti in t n t um e
A
B
A
C
D
E
C-26 Hose Products Division
Wickliffe, Ohiowww.parkerhose.com
EquipmentCatalog 4400 USAccessories
u ut em
e tu e• Combined hose cutter and toggle action press that cuts and
• Shipping Weight: 4 lbs.
e utPart No. TH11-1
e tu e
e ut n utPart No. 871522
e tu e
locking it in a vise, properly align the hose in a radius and cut it with a hacksaw
e n e ti n ept
e tu e• For quick easy marking of hose insertion depth
i et um e e ipti n
TH9-1-26ATH9-1-26B 26 Series -12 through -32TH9-1-43ATH9-1-43B 43 Series -12 through -32
TH9-1-71 71 Series -6 through -32TH9-1-73 73 Series -12 through -32TH9-1-77 77 Series -8 through -16TH9-1-78 78 Series -12 through -32TH9-1-79 79 Series -12 through -24TH9-1-HY HY Series -4 through -16
se insertion depth
•
•
P
e
B
A
C
D
E
C-27 Hose Products Division
Wickliffe, Ohiowww.parkerhose.com
Catalog 4400 US EquipmentAccessories
em ePart No. 432-115V
e tu e
• Comes with vise, all adapters, foot switch and safety guard
• Shipping Weight: 141 lbs.
pti n t• Mounting stand (662451)
ie t e
e tu e• Modular die rack designed to hold small and large Parkrimp
dies• Can be bolted together to a work bench horizontally or
vertically
t n Equipmentt um e
e ipti nStorage of three sets of small diesStorage of two sets of large dies
hold small and large Parkrimp
i e ie
e tu e
• Powder-coated, heavy-duty steel construction
• Floor or bench mounted
t n Equipmentt um e e ipti n
Swivel Die Rack and Small Die Holder
Swivel Die Rack Base
ittin u n t nPart No. TH2-7
e tu e
• Boosts productivity and quality
onto the end of the hose for crimping• Standard with
pti n in
A
B
A
C
D
E
C-28 Hose Products Division
Wickliffe, Ohiowww.parkerhose.com
EquipmentCatalog 4400 USAccessories
em e ie
e tu e
• One of each part listed below is included in the kit
t n Equipment
e i e E E
-16
-24-32
n e it e iePart No. 2727 and 2726
e tu e
t n Equipmente
i e-4-5-6-8
-12-16
n e it e ie
e tu e
• One of each part listed below is included in the kit
t n Equipmente
i e E E
-4-5-6-8
-12
n e e ie(For 271 Transportation Hose) Part No. TH2-7M25-6 and TH2-7M25-8
•
P
B
A
C
D
E
C-29 Hose Products Division
Wickliffe, Ohiowww.parkerhose.com
Catalog 4400 US EquipmentAccessories
e iPart No. Hose Oil
e tu e• Reduces torque and eliminates waste lubrication• Use hose oil with the recommended hose assembly
instructions
e e t
e tu e• Small hand tool to prick minute holes in the rubber cover• To be used in gaseous applications where the pressure
• Driven into the cover every few inches of length either striking the hose or by a rolling action over the hose cover
• Not generally necessary to perforate the hose on all sides
• Shipping Weight: 2 lbs.
u ePart No. Accrolube e tu e
protects against corrosion and ultimately eliminates galling
P
• •
m impePart No. 82C-CVR
e tu e• Water repellant• UV protected• Perfect for indoor and outdoor
applications
it• Karrykrimp, Parkrimp
Karrykrimp2, Minikrimp
e impePart No. 83C-CVR
e tu e• Water repellant• UV protected• Perfect for indoor and outdoor
applications
it• PHastkrimp, Superkrimp
Parkrimp2
Pa
e• W••
i•