HYDRAULIC MACHINES
Hydraulic Machines
for hydroelectric stations
HM-And.e.A4 pdf.Rel.2/04 18.02.2004 0:11 Uhr Seite 2
Power Performance in Hydraulic Machines
In the design of hydraulic machinery,Andritz AG has done true pioneeringwork. The first water turbines wereplanned, designed and manufacturedhere more than 120 years ago!
Hydraulic machines supplied byAndritz have since helped ensureelectric current supply in many countries across the globe.
Extensive research and developmentin the laboratories and test stands ofASTRÖ Institute of hydraulic research,a Graz-based affiliate of Andritz AG,form the foundation stone for this.
Our range:
● Kaplan turbines
● Francis turbines
● Pelton turbines
● Storage pumps and pump turbines
● Compact turbines
● Distributed Control Systems
● Shut-off devices
Freudenau power station on the Danube (Austria)Photograph courtesy of Donaukraft AG
2 3
Applications of our water turbines
Hea
d (m
WC
)
Flow rate (m3/S)
HM-And.e.A4 pdf.Rel.2/04 18.02.2004 0:38 Uhr Seite 3
Horizontal Kaplan Bulb Turbines
4
Horizontal Kaplan Bulb Turbines areideal for large flow rates at a com-paratively low head (up to 30 m).Also, great variations in both the flowrate and head commend their use.
These turbines stand for highest efficiency at a large flow rate, due tostraight flow.
In the limelight:
● Freudenau power station, Danube, Austria
2 horizontal bulb turbines, plus the complete hydraulic design and the runner blades for all six turbines (supplied by a consortiumof Austrian companies)
Runner diameter: 7.5 mHead: 6.8 mOutput: 30,300 kW
● Wang Fu Zhou, China
4 horizontal bulb turbinesRunner diameter: 7.2 mHead: 7.5 mOutput: 30,900 kW
The runner at Freudenau
The bulb casing for Freudenau
Vertical Kaplan Turbines
Vertical Kaplan turbines are used inrun-off river power stations with ahead of up to 65 m. A high outputand efficiency over the entire operat-ing range are characteristics of thisturbine design.
In the limelight:
● Aschach power station, Danube, Austria
2 vertical Kaplan turbinesRunner diameter: 8.4 mHead: 17 mOutput: 73,000 kW
● Salakovac power station, Neretva, Bosnia-Herzegovina
3 vertical Kaplan turbinesRunner diameter: 5.25 mHead: 44 mOutput: 71,000 kW
The runner for Salakovac
5
HM-And.e.A4 pdf.Rel.2/04 18.02.2004 0:38 Uhr Seite 5
7
Pelton Turbines
The casing and annular piping for Koralpe power station
Pelton turbines are the answer to com-paratively low flow rates and heads inthe upper range (up to 1800 m). They are built with horizontal or verticalshafts, single or multiple jets, and aredouble or single regulated.
In the limelight:
● Mayerhofen power station, Austria
1 horizontal, 4-jet double Pelton turbineHead: 475 mRunner diameter : 3,025 mmOutput: 67,500 kWBucket width: 740 mm
● Sellrain-Silz power station, Austria
2 vertical, 6-jet Pelton turbinesHead: 1,233 mOutput: 260,000 kW
● Koralpe power station, Austria
1 vertical, 6-jet Pelton turbineHead: 733 mOutput : 50,100 kW
The runner for Koralpe power station
6
Francis Turbines
Francis turbines are used for medium-to-large outputs and a headof 30 to 750 m.
In the limelight:
● Rosshag power station, Austria
4 vertical Francis turbinesHead: 672 m (a world record until 1986)Output: 58,500 kW
● Bocac power station, Vrbas, Bosnia-Herzegovina
2 vertical Francis turbinesHead: 54 mRunner diameter: 4.05 mOutput: 60,000 kW
● Häusling power station, Austria
2 vertical Francis turbinesHead: 744 m (current world record)Output: 183,300 kW
Häusling: the turbine's upper bearing
HM-And.e.A4 pdf.Rel.2/04 18.02.2004 0:38 Uhr Seite 7
98
Storage Pumps and Pump Turbines
They are used separately as storagepumps and turbines or as pump tur-bines having both functions in onemachine.
Power station at Presenzano, Italy
Compact Turbines
Compact design, bevel-gear bulb turbineVertical pump turbine
Compact turbines are optimally suited to harnessing small hydro-resources.
Operators can choose individualcomponents or complete solutionsfrom our systems range: from theturbine to the electric and governorequipment, to turn-key systems, allfrom a single source!
Rittis power station, Austria
In the limelight:
● 9 stages on the river Mürz, Austriaequipped with bevel-gear bulb turbinesTotal output: 5,600 kW
● Frauenburg power station, Austria2 bevel-gear bulb turbinesOutput: 2,937 kW
● Deutenham power station, Austria2 bevel-gear bulb turbinesOutput: 1,663 kW
HM-And.e.A4 pdf.Rel.2/04 18.02.2004 0:39 Uhr Seite 9
10 11
Control System
Turbine control system
Distributed Control System
Very efficient, processor-guided automation system.
Its advantages versus other designs:
● Highest availability
● Precise regulating
● Graphic programming
● ZIntegration of high level programming languages
● Clear, user-friendly software screen arrangement
● Real-time multitasking operating system
The software is customized for eachinstallation. Process can be simulatedif necessary.
Functions
● Turbine governor
● Automatic water management
● Optimization programs
● Start-stop automatics
● Protective interlocks
● Fault indicator
● Operating signal transfer
● Signal transfer for remote control
● Temperature monitoring
● All control and regulating equipment
Shut-off valves
Our programme includes sphericalvalves, butterfly valves and hollow-jetvalves for use as:
● turbine inlet valves
● pipe break valves
● maintenance valves
● shut-off devices for draft tubes
● energy dissipators
● bottom outlets.
In the limelight:
● Malta valley lower stage, Austria
2 butterfly valves, DN 3600/3400, PN7with maintenance seals
● Sellrain-Silz power station, Austria
4 spherical valves, DN 1100, PN 150
● Walgau power station, Austria
1 butterfly valve, DN 4100, PN 14
Koralpe power station, Spherical valve
HM-And.e.A4 pdf.Rel.2/04 18.02.2004 0:39 Uhr Seite 11
C.61.a.3.pdf.e.2.04
Andritz AGHydraulic Machines DivisionStattegger Strasse 18, A-8045 Graz, AustriaTel. +43 316 6902-0, Fax +43 316 6902-406E-mail: [email protected]: http://www.andritz.com
Top Quality and Customer Service
Quality:
Our success is based on high qualityand reliability, which we ensure byusing the latest in manufacturingtechnologies.
Our comprehensive quality manage-ment gives our customers highestoperating reliability.
Customer service:
We serve our customers any time,day or night. Our hotline for around-the-clock service:+ 43 316 6902-0
Modernization and automation:
We modernize and automate oldersystems and thus improve their efficiency substantially. New runners, guide vanes and electronic governors ensure higheryield.
HM-And.e.A4 pdf.Rel.2/04 18.02.2004 0:10 Uhr Seite 1