FittingsMetal Push-To-Connect Fittings
We makethings MOVE
3 Fittings
4 Product Features
4 Push-In Fittings4 Features and Benefits
5 How it Works
5 Materials of Construction5 Fluid5 Operating Ranges5 Tube O.D.s and Tube Tolerances5 Recommended Tightening Torques
6 How to Specify
6 Dimensions6 Specifications
10 Product Features
10 Push-In Fittings (Metric)10 Features and Benefits
11 How It Works
11 Materials of Construction11 Fluid11 Operating Ranges11 Tube O.D.s and Tube Tolerances11 Recommended Tightening Torques
12 How to Specify
12 Dimensions12 Specifications
17 How to Order
Contents
3For Technical Assistance: 800-442-4622
Bimba’s expanded metal fittings line boasts nearly 400 models, options, and sizes. Each fitting is constructed from corrosion-resistant metal to handle the most caustic and abrasive fluid applications. They are quick to add and remove, with easy tube insertion, making them ideal for completing pneumatic circuits.
Fittings
4 Fittings | BIMBA BIM-FT-0718 Catalog 2018
Product Features
Features and Benefits
• For simple and quick assembly of pneumatic circuits• Positive tube connection• Wide range of types available• Reliable and corrosion resistant
Push-In Fittings
Tube stop
‘O’-ring
Collet
Body
Thread sealant
Internal hexagon
5For Technical Assistance: 800-442-4622
How It WorksMaterials of construction
Body Material: Nickel-plated brass
Swivel Fitting: Nickel-plated brass
Collet: Nickel-plated brass
O-ring: Silicone-free Nitrile
Sealing washer (parallel male threads): Silicone-free Nitrile
Tubing:Nylon 11 or 12, polyurethane (95
durometer or above) and LDPE (Low Density Polyethylene)
Notes:Lower durometer polyurethane may be used, however, an internal tube support is required to prevent internal collapse of the tube wall.Thread Sealant: Precote 5 thread sealant is factory applied to the circumference of tapered male threads.
Fluid
Compressed air, nitrogen, inert and non-combustible gases compatible with materials of construction.** For other types of fluids or compressed gases, please consult factory.
Ranges for normal operation of fittings.
Operating Ranges
**Flow Control working pressures: 5 to 150 psig (.3 to 10 bar)
Working Pressure: 29.5" Hg vacuum to 260 psig(750 mm Hg to 18 bar)*
Working Temperature:
0°F to 175°F (-20°C to 80°C)
Request FPM option on selected part numbers for extended temperature
range : 0°F to 350°F (-20°C to 180°C)
Thread Tightening torque ft lbs (N*m)10-32 UNF .75 – 1 (1-1.4)1/8" NPT 5.0 – 6.5 (6.9 – 8.8)1/4" NPT 8.7 – 10.1 (11.8 – 13.7)3/8" NPT 15.9 – 17.3 (21.6 – 23.5)1/2" NPT 20.2 – 21.7 (27.4 – 29.4)
Recommended Tightening Torques
Tube O.D. Nylon Polyurethane1/8" to 1/2" +0.002" (+0.05 mm) ±0.005"
(3 mm to 14 mm) -0.004" (-0.10 mm) (±0.12 mm)
Tube O.D.s and Tube Tolerances
6 Fittings | BIMBA BIM-FT-0718 Catalog 2018
How To Specify
T
V
A
ØS
AO.D. Tube T / S Tubing Stop V
1/8" 0.09 (2.3) 0.53 (13.5) 0.26 (6.5)5/32" (4) 0.11 (2.8) 0.55 (14.0) 0.30 (7.5)
3/16" 0.13 (3.4) 0.59 (15.1) 0.38 (9.7)1/4" 0.17 (4.4) 0.61 (15.5) 0.42 (10.7)
5/16" (8) 0.24 (6.0) 0.65 (16.5) 0.51 (13.0)3/8" 0.30 (7.6) 0.83 (21.0) 0.59 (15.1)1/2" 0.38 (9.6) 0.96 (24.3) 0.71 (18.1)
Dimensions in (mm)
Specifications
* Reducing union with 1/8" and 1/4" connections
Union
O/D tube Part Number1/8" 120200100-6185/32" 120200200-6183/16" 120200300-6181/4" 120200400-6185/16" 120200500-6183/8" 120200600-6181/2" 120200700-618
Conversion Union(Inch tube to mm tube)
O/D (in)
O/D (mm) Part Number
5/32 4 120200200-6183/16 5 120370305-6181/4 6 120370406-6185/16 8 120200500-6183/8 10 120370610-6181/2 12 120370712-618
Tube End Expander/Reducer
O/D Tube Reducing
O/D Stem Part Number
1/8" 5/32" 120230201-6181/8" 1/4" 120230401-6185/32" 1/4" 120230402-6185/32" 5/16" 120230502-6185/32" 3/8" 120230602-6183/16" 1/4" 120230403-6181/4" 5/16" 120230504-6181/4" 3/8" 120230604-6181/4" 1/2" 120230704-6185/16" 1/2" 120230705-6183/8" 1/2" 120230706-618
Expanding1/4" 1/8" 120230104-6181/4" 5/32" 120230204-618
Union ElbowO/D Tube Part Number
1/8" 120400100-6185/32" 120400200-6183/16" 120400300-6181/4" 120400400-6185/16" 120400500-6183/8" 120400600-6181/2" 120400700-618
Bulkhead UnionO/D Tube
Metric Thread Part Number
1/8" M10x1.0 120290100-6185/32" M10x1.0 120290200-6183/16" M12x1.0 120290300-6181/4" M14x1.5 120290400-6185/16" M16x1.5 120290500-6183/8" M20x1.5 120290600-6181/2" M24x1.5 120290700-618
7For Technical Assistance: 800-442-4622
How To SpecifySpecifications
Union TeeO/D Tube Part Number
1/8" 120600100-6185/32" 120600200-6183/16" 120600300-6181/4" 120600400-6185/16" 120600500-6183/8" 120600600-6181/2" 120600700-618
Male Adapter
O/D Tube
NPT Or UNF
ThreadPart Number
1/8" 10-32 UNF 124250110-6181/8" 1/16 124250116-6181/8" 1/8 124250118-6181/8" 1/4 124250128-6185/32" 10-32 UNF 124250210-6185/32" 1/8 124250218-6185/32" 1/4 124250228-6183/16" 1/8 124250318-6183/16" 1/4 124250328-6181/4" 10-32 UNF 124250410-6181/4" 1/8 124250418-6181/4" 1/4 124250428-6181/4" 3/8 124250438-6185/16" 1/8 124250518-6185/16" 1/4 124250528-6185/16" 3/8 124250538-6183/8" 1/8 124250618-6183/8" 1/4 124250628-6183/8" 3/8 124250638-6183/8" 1/2 124250648-6181/2" 1/4 124250728-6181/2" 3/8 124250738-6181/2" 1/2 124250748-618
Male Adapter - Conversion(mm O.D. Tube to NPTF [Male] Thread)
AO/D Tube
BNPT
Thread
PartNumber
4 10-32 124250210-6184 1/8 124250218-6184 1/4 124250228-6185 1/8 104250518-6185 1/4 104250528-6186 10-32 104250610-6186 1/8 104250618-6186 1/4 104250628-6186 3/8 104250638-6188 1/8 124250518-6188 1/4 124250528-6188 3/8 124250538-61810 1/8 104251018-61810 1/4 104251028-61810 3/8 104251038-61810 1/2 104251048-61812 1/4 104251228-61812 3/8 104251238-61812 1/2 104251248-618
Female Bulkhead AdapterO/D Tube
NPT Female
Part Number
1/4" 1/4 124320428-6183/8" 1/4 124320628-618
Male Adapter - Conversion(Inch O.D. Tube to ISO R [Male] Thread)
O/D Tube
ISO R Thread
PartNumber
1/8" 1/8 121250118-6185/32" 1/8 101250418-6185/32" 1/4 101250428-6181/4" 1/8 121250418-6181/4" 1/4 121250428-6181/4" 3/8 121250438-6185/16" 1/8 101250818-6185/16" 1/4 101250828-6185/16" 3/8 101250838-6183/8" 1/8 121250618-6183/8" 1/4 121250628-6183/8" 3/8 121250638-6183/8" 1/2 121250648-6181/2" 1/4 121250728-6181/2" 3/8 121250738-6181/2" 1/2 121250748-618
Parallel Union “Y"*O/D Tube
O/D Tube Part Number
5/32" 5/32" 120820200-6185/32" 1/4" 120820402-6181/4" 1/4" 120820400-6185/16" 5/16" 120820500-618
*Body Material: Thermoplastic
Stem AdapterO/D Tube
NPT Thread Part Number
3/32" 10-32 124150210-6181/4" 1/8 124150418-6181/4" 1/4 124150428-618
Note: Not suitable for use with C
8 Fittings | BIMBA BIM-FT-0718 Catalog 2018
How To SpecifySpecifications
Female Adapter
Fixed Male Elbow
Swivel Male Elbow
O/D Tube
NPT Thread Part Number
1/8" 1/8 124260118-6181/8" 1/4 124260128-6185/32" 1/8 124260218-6185/32" 1/4 124260228-6181/4" 1/8 124260418-6181/4" 1/4 124260428-6185/16" 1/8 124260518-6185/16" 1/4 124260528-6183/8" 1/4 124260628-6183/8" 3/8 124260638-618
O/D Tube
NPT Thread
Part Number
1/8" 1/8 124450118-6185/32" 1/8 124450218-6185/32" 1/4 124450228-6183/16" 1/8 124450318-6183/16" 1/4 124450328-6181/4" 1/8 124450418-6181/4" 1/4 124450428-6181/4" 3/8 124450438-6185/16" 1/8 124450518-6185/16" 1/4 124450528-6183/8" 1/8 124450618-6183/8" 1/4 124450628-6183/8" 3/8 124450638-6183/8" 1/2 124450648-6181/2" 1/4 124450728-6181/2" 3/8 124450738-6181/2" 1/2 124450748-618
O/D Tube
NPT or UNF
ThreadPart Number
1/8" 10-32 UNF 124470110-6181/8" 1/8 124470118-6181/8" 1/4 124470128-618
5/32" 10-32 UNF 124470210-6185/32" 1/8 124470218-6185/32" 1/4 124470228-6183/16" 1/4 124470328-6181/4" 10-32 UNF 124470410-6181/4" 1/8 124470418-6181/4" 1/4 124470428-6181/4" 3/8 124470438-618
5/16" 1/8 124470518-6185/16" 1/4 124470528-6183/8" 1/8 124470618-6183/8" 1/4 124470628-6183/8" 3/8 124470638-6183/8" 1/2 124470648-6181/2" 1/4 124470728-6181/2" 3/8 124470738-6181/2" 1/2 124470748-618
CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications.
CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications.
Swivel Female Elbow
CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications.
Extended Swivel Male Elbow
O/D Tube
NPT Thread Part Number
1/8" 1/8 124480118-6185/32" 1/8 124480218-6185/32" 1/4 124480228-6181/4" 1/8 124480418-6181/4" 1/4 124480428-6183/8" 1/4 124480628-6181/2" 3/8 124480738-618
O/D Tube
NPT Thread Part Number
5/32" 1/8 124540218-6181/4" 1/8 124540418-6181/4" 1/4 124540428-6183/8" 1/4 124540628-6183/8" 3/8 124540638-618
Swivel Male ElbowO/D Tube
ISO Thread Part Number
1/4" G1/8 122470418-6181/4" G1/4 122470428-618
CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications.
Swivel Male Tee
O/D Tube
NPT or UNF
ThreadPart Number
1/8" 10-32 UNF 124670110-6181/8" 1/8 124670118-6181/8" 1/4 124670128-6185/32" 10-32 UNF 124670210-6185/32" 1/8 124670218-6185/32" 1/4 124670228-6183/16" 1/8 124670318-6181/4" 1/8 124670418-6181/4" 1/4 124670428-6181/4" 3/8 124670438-6185/16" 1/8 124670518-6185/16" 1/4 124670528-6183/8" 1/8 124670618-6183/8" 1/4 124670628-6183/8" 3/8 124670638-6183/8" 1/2 124670648-6181/2" 1/4 124670728-6181/2" 3/8 124670738-6181/2" 1/2 124670748-618
9For Technical Assistance: 800-442-4622
How To SpecifySpecifications
CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications.
*Material: Thermoplastic
Male Swivel Y*
* Material: Nickel plated Brass
O/D Tube
NPT Thread Part Number
1/4" 1/8 124880418-6181/4" 1/4 124880428-618
Swivel Male Side Tee
O/D Tube
NPT or UNF
ThreadPart Number
1/8" 1/8 124680118-6181/8" 1/4 124680128-6185/32" 10-32 UNF 124680210-6185/32" 1/8 124680218-6185/32" 1/4 124680228-6181/4" 1/8 124680418-6181/4" 1/4 124680428-6181/4" 3/8 124680438-6185/16" 1/8 124680518-6185/16" 1/4 124680528-6183/8" 1/8 124680618-6183/8" 1/4 124680628-6183/8" 3/8 124680638-6183/8" 1/2 124680648-6181/2" 3/8 124680738-6181/2" 1/2 124680748-618
Plug*O/D Stem Part Number
1/8" 120040100-6181/4" 120040400-6183/8" 120040600-618
10 Fittings | BIMBA BIM-FT-0718 Catalog 2018
Product FeaturesPush-In Fittings (Metric)
• Compact units featuring retained collets and positive tube anchorage
• Silicone free ‘O’-ring seals• Non-PTFE based thread sealant on all BSP taper threads• Easy tube insertion for rapid assembly• Internal hexagon on straight adaptors allows assembly in
confined spaces• Wide range of types available• Reliable and corrosion resistant
Features and Benefits
Tube stop
‘O’-ring
Collet
Body
Thread sealant
Internal hexagon
11For Technical Assistance: 800-442-4622
How It Works
Thread SizeTightening Torque Nm (ft lbs)
ISO R ISO G*
M5 — 1 - 1.4 (.75 - 1.05)
1/8 6.9 - 8.8 (5.0 - 6.5) 7 - 9 (5.3 - 6.8)
1/4 11.8 - 13.7 (8.7 - 10.0) 9 - 12 (6.8 - 9.0)
3/8 21.6 - 23.5 (15.9 - 17.3) 34 - 38 (25.5 - 28.5)
1/2 27.4 - 29.4 (20.2 - 21.7) 41 - 47 (30.8 - 35.3)
Recommended Tightening Torques
* Lower torques can be used to achieve a seal but these figures are recommended to provide some vibration resistance.
O.D. Tube Tolerances
Tube O.D. Nylon Polyurethane
4 mm to 5 mm +0.05 mm (+0.002")
(5/32" to 3/16") -0.07 mm (-0.003") ±0.10 mm
6 mm to 14 mm +0.05 mm (+0.002") (±0.004")
(1/4" to 1/2") -0.10 mm (-0.004")
Materials of construction
Body Material: Nickel-plated brass
Swivel Fitting: Nickel-plated brass
Collet: Nickel-plated brass
O-ring: Silicone-free Nitrile
Sealing washer (parallel male threads): Silicone-free Nitrile
Tubing:Nylon 11 or 12, polyurethane (95
durometer or above) and LDPE (Low Density Polyethylene)
Notes:Lower durometer polyurethane may be used, however, an internal tube support is required to prevent internal collapse of the tube wall.Thread Sealant: Precote 5 thread sealant is factory applied to the circumference of tapered male threads (ISO R).
Fluid
Compressed air, nitrogen, inert and non-combustible gases compatible with materials of construction.* For other types of fluids or compressed gases, please consult factory.
Ranges for normal operation of fittings.
Operating Ranges
* Flow Controls working pressures: .3 to 10 bar (5 to 150 psig)
Working Pressure: 750 mm Hg to 18 bar(29.5" Hg vacuum to 260 psig)
Working Temperature:
-20°C to 80°C (0°F to 175°F)
Request FPM option on selected part numbers for extended Temperature range: -20°C to 180°C (0° to 350°F)
Tube O.D.s and Tube Tolerances
LDPE –Tolerances specified in DIN 73378 or BS54-09/1:1976
12 Fittings | BIMBA BIM-FT-0718 Catalog 2018
How To SpecifyDimensions mm (in.)
A O.D. Tube S T
Tubing Stop V
4 (5/32") 2.8 (.11) 14.0 (.55) 7.5 (.30)
5 3.4 (.13) 15.0 (.59) 10.0 (.39)
6 4.4 (.17) 15.5 (.61) 11.0 (.43)
8 (5/16") 6.0 (.24) 16.5 (.65) 13.0 (.51)
10 7.6 (.30) 21.0 (.83) 14.5 (.57)
12 9.6 (.38) 24.5 (.96) 18.0 (.71)
14 11.5 (.45) 24.5 (.96) 20.0 (.79)
T
V
A
ØS
Specifications
Union
Union Elbow
Bulkhead Union
Conversions Union (Inch tube to mm tube)
O/D Tube Part Number
4 100200400-618
5 100200500-618
6 100200600-618
8 100200800-618
10 100201000-618
12 100201200-618
14 100201400-618
O/D Tube
Metric Thread Part Number
4 M10 x 1.0 100290400-618
5 M12 x 1.0 100290500-618
6 M14 x 1.0 100290600-618
8 M16 x 1.5 100290800-618
10 M20 x 1.5 100291000-618
12 M24 x 1.5 100291200-618
O/Din
O/Dmm Part Number
5/32 4 120200200-618
3/16 5 120370305-618
1/4 6 120370406-618
5/16 8 120200500-618
3/8 10 120370610-618
1/2 12 120370712-618
O/D Tube Part Number
4 100400400-618
5 100400500-618
6 100400600-618
8 100400800-618
10 100401000-618
10 100401200-618
14 100401400-618
13For Technical Assistance: 800-442-4622
How To Specify
O/D Tube
ISO R Thread Part Number
4 1/8 101250418-618
4 1/4 101250428-618
5 1/8 101250518-618
5 1/4 101250528-618
6 1/8 101250618-618
6 1/4 101250628-618
8 1/8 101250818-618
8 1/4 101250828-618
8 3/8 101250838-618
8 1/2 101250848-618
10 1/8 101251018-618
10 1/4 101251028-618
10 3/8 101251038-618
10 1/2 101251048-618
12 1/4 101251228-618
12 3/8 101251238-618
12 1/2 101251248-618
14 3/8 101251438-618
14 1/2 101251448-618
Specifications
Tube End Expander/Reducer
O/D Tube
O/D Stem Part Number
4 6 100230604-618
4 8 100230804-618
6 8 100230806-618
4 10 100231004-618
6 10 100231006-618
8 10 100231008-618
6 12 100231206-618
8 12 100231208-618
10 12 100231210-618
8 14 100231408-618
12 14 100231412-618
Union Tee
O/D Tube Part Number
4 100600400-618
5 100600500-618
6 100600600-618
8 100600800-618
10 100601000-618
12 100601200-618
14 100601400-618
Union “Y”
O/D Tube
O/D Tube Part Number
4 4 120820200-618
6 6 100820600-618
8 8 120820500-618
10 10 100821000-618
8 6 100820806-618
10 8 100821008-618
Not suitable for use with C
Male Adapter - Conversion (Inch O.D. Tube to ISO R (Male) Thread)
Pneumatic Male Adapter
O/D Tube
NPT Thread
Part Number
4 10-32 124250210-618
4 1/8 124250218-618
4 1/4 124250228-618
5 1/8 104250518-618
5 1/4 104250528-618
6 10-32 104250610-618
6 1/8 104250618-618
6 1/4 104250628-618
6 3/8 104250638-618
8 1/8 124250518-618
8 1/4 124250528-618
8 3/8 124250538-618
10 1/8 104251018-618
10 1/4 104251028-618
10 3/8 104251038-618
10 1/2 104251048-618
12 1/4 104251228-618
12 3/8 104251238-618
12 1/2 104251248-618
14 Fittings | BIMBA BIM-FT-0718 Catalog 2018
How To SpecifySpecifications
ISO G Male Adapter ISO R Stem Adapter
O/D Tube
ISO G or Metric Thread
Part Number
4 M5 x .8 102250405-618
4 1/8 102250418-618
4 1/4 102250428-618
5 M5 x .8 102250505-618
5 1/8 102250518-618
5 1/4 102250528-618
6 M5 x .8 102250605-618
6 1/4 102250628-618
8 1/8 102250818-618
8 1/4 102250828-618
8 3/8 102250838-618
8 1/2 102250848-618
10 1/8 102251018-618
10 1/4 102251028-618
10 3/8 102251038-618
10 1/2 102251048-618
12 1/4 102251228-618
12 3/8 102251238-618
12 1/2 102251248-618
14 1/2 102251448-618
O/D Stem
ISO R Thread
Part Number
6 1/4 101150628-618
8 1/4 101150828-618
ISO G Stem Adapter
O/D Stem
ISO G Thread
Part Number
6 1/8 102150618-618
6 1/4 102150628-618
8 1/4 102150828-618
8 3/8 102150838-618
10 1/4 102151028-618
12 3/8 102151238-618
ISO G Male Connector
Stem Elbow
ISO G Female Adapter
O/D Tube
ISO G or Metric Thread
Part Number
4 1/4 102260428-618
6 1/8 102260618-618
6 1/4 102260628-618
8 1/8 102260818-618
8 1/4 102260828-618
10 1/4 102261028-618
10 3/8 102261038-618
12 1/2 102261248-618
O/D Tube Stem Product
Number
6 6 100430600-618
8 8 100430800-618
15For Technical Assistance: 800-442-4622
How To Specify
ISO R Male Fixed Elbow
O/D Tube
ISO R Thread
Part Number
4 1/8 101450418-618
4 1/4 101450428-618
5 1/8 101450518-618
6 1/8 101450618-618
6 1/4 101450628-618
8 1/8 101450818-618
8 1/4 101450828-618
8 3/8 101450838-618
8 1/2 101450848-618
10 1/4 101451028-618
10 3/8 101451038-618
12 1/4 101451228-618
12 3/8 101451238-618
12 1/2 101451248-618
ISO G Swivel Male Elbow
O/D Tube
ISO G or Metric Thread
Part Number
4 M5 x .8 102470405-618
4 1/8 102470418-618
4 1/4 102470428-618
5 M5 x .8 102470505-618
5 1/8 102470518-618
6 M5 x .8 102470605-618
6 1/8 102470618-618
6 1/4 102470628-618
8 1/8 102470818-618
8 1/4 102470828-618
8 3/8 102470838-618
8 1/2 102470848-618
10 1/8 102471018-618
10 1/4 102471028-618
10 3/8 102471038-618
10 1/2 102471048-618
12 1/4 102471228-618
12 3/8 102471238-618
12 1/2 102471248-618
14 3/8 102471438-618
14 1/2 102471448-618
ISO R Swivel Male Elbow
CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications.
O/D Tube
ISO R Thread
Part Number
4 1/8 101470418-618
4 1/4 101470428-618
5 1/8 101470518-618
5 1/4 101470528-618
6 1/4 101470628-618
6 3/8 101470638-618
8 1/8 101470818-618
8 1/4 101470828-618
8 3/8 101470838-618
8 1/2 101470848-618
10 1/8 101471018-618
10 1/4 101471028-618
10 3/8 101471038-618
10 1/2 101471048-618
12 1/4 101471228-618
12 3/8 101471238-618
12 1/2 101471248-618
14 3/8 101471438-618
14 1/2 101471448-618
Specifications
CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications.
ISO R Swivel Male Tee
CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications.
AO/D tube
BISO R
ThreadPart Number
4 1/8 101670418-618
4 1/4 101670428-618
6 1/8 101670618-618
6 1/4 101670628-618
8 1/8 101670818-618
8 1/4 101670828-618
10 1/4 101671028-618
10 3/8 101671038-618
12 1/4 101671228-618
12 1/2 101671248-618
16 Fittings | BIMBA BIM-FT-0718 Catalog 2018
How To Specify
ISO G Swivel Male Side Tee ISO R Swivel Male Side Tee
ISO G Swivel Male Tee
CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications.
CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications.
A O/D Tube
B ISO G or Metric Thread
Part Number
6 M5 x .8 102670605-618
6 1/8 102670618-618
6 1/4 102670628-618
8 1/8 102670818-618
8 1/4 102670828-618
10 1/4 102671028-618
10 3/8 102671038-618
A O/Dtube
B ISO G or Metric Thread
Part Number
6 1/8 102680618-618
8 1/8 102680818-618
AO/D Tube
BISO R
ThreadPart Number
4 1/8 101680418-618
6 1/8 101680618-618
6 1/4 101680628-618
8 1/8 101680818-618
8 1/4 101680828-618
8 3/8 101680838-618
10 1/4 101681028-618
10 3/8 101681038-618
12 1/2 101681248-618
Specifications
17For Technical Assistance: 800-442-4622
How to OrderThe model number of Bimba push-to-connect fittings consists of an alphanumeric cluster designating product series, threading, fitting shape, tube size, thread size, and branding, which together make up the complete part number to use in ordering. Use the ordering information below to build a valid part number.
An example of a basic imperial-sized male elbow fitting with an ISO R thread, 1/2” tube size, and 1/2” thread is shown below.
12 1 45 07 48 - 618
Thread
0 No port thread
1 ISO R (taper BSPT)
2 ISO G + MS (parallel BSP)
4 NPTF + 10-32
Thread Size
18 1/8”
28 1/4”
38 3/8”
48 1/2”
10 10-32 UNF
05 M5 x 0.8
Tube SizeInch OD Metric OD
01 1/8” 04 4mm
02 5/32” 05 5mm
03 3/16” 06 6mm
04 1/4” 08 8mm
05 5/16” 10 10mm
06 3/8” 12 12mm
07 1/2” 14 14mm
Fitting Shape
04 Plug
15 Stem adapter
20 Union
23 Tube end expander/reducer
25 Male connector
26 Female connector
29 Bulkhead union
32 Female bulkhead connector
37 Conversion union
40 Union elbow
43 Stem elbow
45 Male elbow
47 Swivel male elbow
48 Swivel female elbow
54 Extended swivel male
60 Union tee
67 Swivel male tee
68 Swivel female elbow
82 Parallel union Y
88 Parallel male Y swivel
Branding
618 Bimba labelled
Series
10
Brass push-in fittings (metric) nickel plate
and washers, sealant, assembled
12
Brass push-in fittings (inch) nickel plate and
washers, sealant, assembled
18 Fittings | BIMBA BIM-FT-0718 Catalog 2018
Notes
Notes
Bimba 25150 S. Governors Hwy University Park, IL 60484Tel: +1 708 534 8544 Fax: +1 708 235 2014
Due to our policy of continuous development, Bimba reserve the right to change specifications without prior notice.BIM-PFF-0718
IMI Precision Engineering operates four global centres of technical excellence and a sales and service network in 75 countries, as well as manufacturing capability in the USA, Germany, China, UK, Switzerland, Czech Republic, Mexico and Brazil.For information on all IMI Precision Engineering companies visit www.imi-precision.comSupported by distributors worldwide.
For further information, scan this QR code or visit www.bimba.com