7/24/2019 Weicco India Hangers
1/4
Recommended for suspension of plain
or
insulated
stationary
piping. Design provides key benefit of
substantial
level
adjustability
after installation. WEICCO offers special intermediate s izes to sui t any
insulated
pipe 00
Selection Ordering
For insulated pipe, please specify effective or pipe
size plus insulation thickness. Standard (as below) or
intermediate models will
be
selected as appropriate.
Where WEICCO Rubber Support Inserts (RSI) are
used, specifying matching WCH hangers will suffice.
Product
Features
WCH hangers allow vertical level
adjustment
of 20 to
150mm (based on hanger size) after pipe installation.
This helps
in
effective leveling of piping systems.
Besides the table below, we offer intermediate sizes
designed to closely fit the effective pipe for any
insulation thickness. This enhances installation quality
by avoiding usage of oversize hangers.
Available EPDM
lined
- to prevent contact between
dissimilar materials (if used with non-ferrous pipe),
minimise condensation and provide noise attenuation.
Lining has a temperature range of -20C to 110C.
o
(BDLT STUD)
- U-STRAP
:
-e-
7/24/2019 Weicco India Hangers
2/4
Adjustable swivel ring type steel
band
hangers suitable fo r
suspension
of all types
of
stationary pipes.
Most
commonly used for sprinkler system pipelines. Supplied complete
with
swivel nut.
Product
Features
Knurled
swivel
nu t
facilitates easy installation
and vertical adjustment of pipe level post
installation.
Lips are dimpled at bends for models WPCS 48
and above, for added strength.
Swivel nuts are
countersunk
to prevent burring
or damage to threads.
Also available with EPDM
Lining
which:
- eliminates contact between dissimilar materials
when clamps are used with non-ferrous pipe
- provides acoustic attenuation by minimizing
transmission of high frequencies from piping to
building structure
- acts as a thermal barrier
- has a temperature range of -20C to
11 DoC
Threaded Rod (by others)
Material:
Finish:
Options:
Steel
Electrogalvanised post manufacture
EPOM Lined (suffix R )
Epoxy Powder Coated finish (suffix P )
Hot Dip Galvanised finish (suffix HOG )
Stainless Steel construction (suffix SS )
Standard Sprinkler
Pipe Hanger (WPCS)
us
EPDM
lined Sprinkler
Pipe Hanger (WPCS.R)
Underwriters Laboratories listed fo r sizes to 8 .
Compliance - US Standards MSS-SP58 (Type 10),
MSS-SP69; EG
to
ASTM 8633 SC3, 8S1706 FE/ZN12
SELECTION TABLE
FOR
SPRINKLER
PIPE
HANGERS
Model Steel Pipe
Swivel Nut
Max.
Nominal Size (mm)
Load (Kg)
WPCS 28
M10
61
150
WPCS 35
1
M10 68
150
WPCS42
1 1.
M10 75
150
WPCS48
1y,
M10 81 150
WPCS60
2
M10 100
150
WPCS 76 Y
M10
120 225
WPCS90 3
M10 135
225
WPCS 115
4 M10 165 225
WPCS 140
5 M12 195 300
WPCS 165 6
M12
230 300
WPCS 220
8
M12 290
450
www.weicco.com
rodu t speoficarions are subject to changeWIthout pnor notice
WPCS 1A3013
MOODY
< N_TERNA_TIO_NAL ISO 9001 :2008
7/24/2019 Weicco India Hangers
3/4
Heavy
duty
U Bolts
designed
to grip, guide or
support
plain and insulated pipes.
Selection I
Ordering
Intermediate U-Bolt models are available, suitable
for any insulated pipe 00 Please specify effective
pipe
00
or pipe size plus insulation thickness.
Where WEICCO Rubber Support Inserts (RSI) are
used, specifying 'matching U-Bolts' will suffice.
If EPOM sleeved U-Bolts are required, specify pipe
ODs to enable selection of suitable models.
Application as guide for
vertical insulated pipe
Application for suspension
of
horizontal insulated pipe
D
Compliance - US Standards MSS-SP58 (Type 24),
MSS-SP69; EG to ASTM
8633
SC3,
8S1706
FE/ZN12
Application as grip for
horizontal insulated pipe
H
A : r
Steel
Electrogalvanised post manufacture
U-Bolt with EPOM sleeve (suffix 'R')
Epoxy Powder Coated finish (suffix 'P')
Hot Dip Galvanised finish (suffix 'HOG')
Stainless Steel construction (suffix 'SS')
Brass construction (suffix 'BR')
Product Features
Supplied complete with four nuts
Besides models listed
in
the table below, a full range
of intermediate sizes is available to match the ODs
of WEICCO RSI, providing a simple and effective
support solution for insulated pipe.
WEICCO U-Bolts are available with EPDM sleeve,
to prevent contact between dissimilar materials when
used with copper, plastic, aluminum or glass pipe.
Material:
Finish:
Options:
SELECTION TABLE
FOR U BOLTS
Model
Steel Pipe
Dimensions (mm)
Max Suspended
Nominal
A H D
TL (Thread Length) Load (Kg)
us
22
29 42 6 25
2
US 28
35 48 6 25
2
US
35
1
42 54
6
25
2
US
42 1
y.
49 62
6
25 2 Q
US
48
1Y
58
75
8 35
45
US
6
2
7 87 8 35
45
US 75 2Y
86 1 3
8
35
45
US9
3
1 2 122 1 45 7
US 115
4
127 148 1 45
7
US
142
5
156
18 12 5
1 5
US 167 6
182 2 5 12 5 1 5
US219
8
234
26
12
5
1 5
US 273
1
291
324
16 7
2
US
323
12
342
375 16 7
2
US
356 14
374
4 7 16
7
2
US
4 6
16
425 458
16 7
2
US
456
18
479 522 2 85 3
US 5 8
2
532 573
2
85
3
US
559 22
583 624 2 85 3
US
61
24
634 675
2
85 3
US
66
26
688 738
24
1 45
US 71 28
74 789
24
1 45
US
762
3
791 84 24
1
45
US 915 36
995
24
1 45
Stockist:
US 1C6512
I
MOODY
Producr specifications are subJect to change \\ithout
pnor
notice
INT RN TION L
l
ISO 9 1 :2 8
7/24/2019 Weicco India Hangers
4/4
Ductile iron C-c1amp designed for providing attachment of threaded rod to steel
beams
or purlins,
without
the
need for drilling or welding. WEICCO WBC is suitable for installation at both upper and lower flanges of beams.
Model Max. Rod
Standard
Size
Lengths (mm)
BCRS 1 M12
25 35 45
BCRS2 M20
25 35 45
BCRS3 M24
25 35 45
Compliance - US Standard MSSSP127;
EG
to ASTM 8633 SC3, 8S1706 FE/ZN12
Material: Steel
Finish: Electrogalvanised post manufacture
Retaining Strap
BCRS Retaining Strap, available as an optional
extra, provides additional installation safety by
preventing horizontal slippage of the clamp.
May
be
ordered by specifying strap model and
length required. The length selected should
be
appx. 120mm more than width of beam flange.
Retaining Strap
(optional)
Retaining Strap
(optional)
Set screw
Compliance
US
Standards MSS-SP58 (Type 19 23),
MSS-SP69; EG to ASTM 8633 SC3, 8S1706 FE/ZN12
Material: Ductile Iron
Finish: Electrogalvanised
Product
Features
Suitable for use with I-beams, channels, angles or
steel roof purlins with up to 22mm flange thickness.
Suitable for threaded
rod
sizes from 1Omm to 24mm.
Convenient means
of
suspending pipelines, ducting,
false ceilings or equipment from structural members,
without the need for drilling or welding.
Permit vertical level adjustment post installation.
WBC clamps are denoted as universal on account of
their versatile design, which provides a single product
solution for various application situations.
a) They can
be
attached to either the upper or lower
horizontal flanges
of
beams.
b The threaded suspension rod may either be fixed
offset from the edge of the flange or directly under
and inline with the set screw.
The deep throat design ofWBC clamps helps ensure
an
effective grip on the beam flange.
Supplied complete with hardened set screw, lock-nut.
WBC are suitable for applications requiring seismic
restraint when used along with BCRS retaining straps.
Typical Application
SELECTION TABLE FOR UNIVERSAL C-TVPE BEAM CLAMPS
Model
Dimensions (mm)
Torque*
Max.
1
A
8
C E
(kgcm)
Load (Kg)
WBC 10
M10
41
54
16
19
69
35
WBC 12
13
M12
41 54 16 19
69
35
WBC
16
17
M16
51
73 19
20 288
510
WBC2
21 M20 51
73 19
20
288
510
WBC22 23
M22
57 87
21
22
288
68
WBC24
25
M24
57 87 21
22 288
68
* Maximum recommended set screw torque
Stockist:
rodu t
specifications are subject change without paOt notice
WBC 1J0509
MOODY
L NTERNA
ClNAL
ISO 9 1 :2