StarCoat Sleeve WideWebFlexoSleeves
Protective ringwith register slot
CLICK-CLACK(Patent pending)
Exchangeableprotection ring
Technical DataThe following data refers to an air mandrel witha max. T.I.R. of 0.005 mm:
• Max. T.I.R. 0,02 mm.• Max. diameter change over 3 years 0,02 mm.
(working temperature 18 ÷ 40 ºC) • Static dispersion < 1 Mega Ohm• Total encapsulation – no absorption of solvent or moisture• Patent pending quick-change protection ring with register slot• Not affected by humidity • Hardness - 75 Shore D
A 4 mm thick fibreglass flange on both sleeve ends
A superior sleeve, createdto provide total dimensional stabilityThe conductive surface is applied to a fibreglass reinforcedlayer. This dual construction ensures very high mechanicalstrength and constant dimensional tolerance over time. Highly resistant to solvents.
Recommended for 4-colour printing and for extremely subtle highlights and vignettes. This sleeve, with 3-year warranty, prints multiple images. Itis made of conductive materials conforming to work safetystandards issued by the “PTB” (Physikalische TechnischeBundesanstalt – Germania) for flexographic presses.
CarboBridge Sleeve (Patent pending) WideWebFlexoSleeves
High Modulus Carbon-Fibre bridge sleeve without a corecompressible layer that provides the ability to print atthe highest quality at over 700 m/min. Engineered andproven to damper harmonic resonance and reduce dynamicprint-deck vibration. The bridge is air-mounted, resulting insignificantly easier on-press use by the operator – improvedsafety with less potential for injury.
100
80
60
40
20
00 100 200 300 400 500 600 700
speed (m/min)
High ModulusCarrier
StandardCarrier
Carbobridge
pri
nt q
ualit
y (%
)
Quality control of Carrier sleeves – illustrating tube deflection test and laser measurement of finished diameter.
Available CarboBridge Types:• Flow-Thru CarboBridge
Utilizes a single mandrel air source for mounting both bridge and plate sleeve. The most common style for current press designs.
• Standard CarboBridgeUses a secondary air source for mounting plate sleeve via an internal piping system. Used on presses with independentrear air supply system as well as mounter/proofers.
• Custom CarboBridgeAll CarboBridges can be produced to the specifications of any OEM press manufacturer.
WideWebFlexoSleeves
Car
mi e
Ube
rtis
Cas
ale
RossiniSpain
Camí del Mig, 8-1008349 Cabrera De Mar(Barcelona) - EspañaTel. +34 93 759 60 33Fax +34 93 759 35 [email protected]
Rossini s.p.a.L’Aquila
Nucleo industrialede L’AquilaComprensorio di Bazzano67100 L’Aquila - ItalyTel. +39 0862 44 561Fax +39 0862 44 15 32
Production facilities
Sales offices
www.rossini-spa.it
RossiniUK Ltd.
Breach HouseBreach, CluttonBristol BS39 5QR - EnglandTel. +44 1761 45 38 83Fax +44 1761 45 38 83 [email protected]
RossiniFrance
B.P. 2368720 IllfurthFranceTél. +33 03 893 191 20Fax +33 03 890 641 [email protected]
RossiniGmbH
Toni Bauer Strasse, 853894 MechernichGermanyTel. +49 2443 31 47 59Fax +49 2443 90 23 48 [email protected]
RossiniNorth America Inc.
4305 Creek Park Drive Suwanee, GA 30024USATel. +1 (678) 482-0835Fax +1 (678) [email protected]
Rossini S.p.A.Via de Gasperi, 520027 RescaldinaMilano - ItalyTel. +39 0331 472711Fax +39 0331 [email protected]
Rossini Do Brasil
Ind.E Com. De Plasticos e Borrachas LtdaRua Tapabua S/Nr. Lote 12b qd.4 C. Empresar. Rod.Anhanguera km 33 Cep 07750-000 Cajamar – SP – BrasilTel. +55 11 4446 64 56 - Fax +55 11 4446 62 [email protected]
Rossini Erminio Printing Rollers(Shenzhen) Co., Ltd.
Ground Floor, Block 1, Crown Industrial Park, 9th TerraRoad, Futian District, 518040, Shenzhen, P.R. of ChinaTelephone number: +86-755-83480901 Fax number: +86-755-83480902email: [email protected]:www.rossini-sz.com
Rossini Spa reserves the right to modify the presented products at any time and without notice.