Download - PRODUCT SALES CATALOG - Arrow Material Handling ...

800-821-7563 | Arrowmhp.com | [email protected] 1PRODUCT SALES CATALOG800-821-7563 | Arrowmhp.com | [email protected]

16000 West 108th Street Lenexa, KS 66219

800-821-7563 | Arrowmhp.com | [email protected] 2


Arrow Material Handling Products was established in 1969 as Arrow Forklift Parts Corporation in Kansas City, Missouri. For more than 25 years, Arrow specialized in aftermarket forklift parts and components. In the mid-1990’s the company was renamed Arrow Material Handling Products, shifting focus to the fabrication and distribution of high-quality forklift forks and attachments. After more than a decade of growth, in 2012 the company relocated to a larger facility located in Lenexa, Kansas. Since then, Arrow has seen continued success as a result of improvements to our products, as well as expansion and innovation of our product offerings.

OUR STORY

UNMATCHED SELECTIONWe have the largest selection of forklift forks in North America. Our available inventory includes attachments and replacement parts for forklifts, skid steers, telehandlers, wheel loaders, excavators, and more. Arrow dealers enjoy industry-leading turnaround times, consistent product availability, and exceptional customer service.

PREMIUM-QUALITYOur high-quality steel has made us a popular choice for some of the industry’s largest manufacturers and dealerships. Arrow forks are made with a premium boron-steel alloy and subjected to a full heat-treatment process. This extends the life of the fork by reducing damage from impact and stress, especially in colder climates.

INDUSTRY EXPERIENCEOver the past 50 years, we’ve learned how to optimize the engineering and product development process to ensure industry-leading product innovation. Our industry insights benefit customers with cutting-edge product developments that save time and money and increase profits.


Our Story 3Commitment to Quality 6Quality Management System 8Custom Attachments 9North American Distribution 10Material Handling Markets We Serve 12Attachments by Machine 13Customer Service 15 Fork Variety 17Fork Wear Indicator 18Standard ITA 20FTP 21Blank 22 Block 23Bucket 24Telehandler 26Custom 27 Fork Shields 28 Fork Extensions 29

FORKS

INTRODUCTION

PRODUCT TABLE OF CONTENTS


Auger Drive Frame and Cradle 32Auger Bits 33Auger Bit Teeth and Pilot 34Auger Stump Planer 35Auger Drive Cement Mixer 35Auger Drive Shaft Extension 36 Auger Drive Shaft Adapters 36Extension Booms 38Rigid Booms 39Jib Booms 39Truss Booms 40Skid Steer Buckets 42Stand Up Buckets 43Mulch Buckets 43Grapple Buckets 44Fork Mounted Buckets 45Telehandler Buckets 46Bucket Accessories 47Carriage Mount Carpet Poles 48Fork Mounted Carpet Poles 49Low Profile Carpet Poles 50Coil Rams 50 CTI Products 51Skid Steer Fork and Frames 52Telehandler Fork and Frames 54Wheel Loader Fork and Frames 56Mini Fork and Frames 57AG Frames 57Grapple Pallet Forks 58Grapple Buckets 59Compact Skid Steer Bucket Grapple 60Compact Skid Steer Grapple Rake 60Brush and Root Grapple 61Pipe Grapples 62Carriage Mount Grapple 63Universal Skid Steer Adapter 63 Side Shifters 64Fork Spreaders 65Spreader Beams 65Trailer Spotters 66Trash Hoppers 67Work Platforms 68

ATTACHMENTS PARTS

STORAGE

CONCLUSION

Load Backrests 72 Shaft Bars 73Carriage Bars 73Parts 74Seats and Seat Belts 75

Fork Rack 78Excavator Bucket Rack 78Auger Rack 79

Engineered-to-Order 80Land Clearing 81Customer Support 82Warranty 83Conversion Table 83 Capacity Chart 84

800-821-7563 | Arrowmhp.com | [email protected]


Arrow premium-quality forks meet or exceed all ISO 2330 Standards and ANSI/ITSDF B56.11.4 Standards as provided by the Industrial Truck Association. In the United States, the Industrial Truck Association (ITA) and The Industrial Truck Standards Development Foundation (ITSDF) are the two governing organizations responsible for standardizing the manufacturing of fork tines. Comparatively, our forks test at higher quality and above standards of competitors across the industry.

Arrow performs independent testing to verify steel quality and performance. These tests measure yield, impact, toughness, and fatigue. All of our independent testing is performed by an accredited laboratory using industry standard procedures on calibrated machines in a controlled environment.

Arrow Forks are built to sustain more impact than the industry standards require, which is far more than the bargain forks from some competitors.

COMMITMENT TO QUALITY

ARROW PREMIUM-QUALITY FORKS meet or exceed ALL ISO 2330 AND ANSI/ITSDF B56.11.4 STANDARDS



QUALITY MANAGEMENT SYSTEM

ISO 9001:2015 CERTIFIEDArrow Material Handling Products is an ISO 9001:2015 certified company. The ISO 9001 certification guarantees Arrow’s dedication to the standards and processes set forth by the International Organization for Standardization.

COMMITTED TO THE CUSTOMERISO 9001 certification reflects Arrow’s quality process program that supports our commitment to customer satisfaction and an exceptional customer experience.

STRIVING TOWARDS PERFECTIONThis certification solidifies the company’s pursuit of continual product development and serves as a testament to the company’s devotion to innovation and providing high-quality products. It also ensures quality and consistency throughout the production and manufacturing cycles.

DEDICATED TO THE PROCESSISO 9001 certification affirms the company’s adherence to quality-management principles. These principles are grounded in the effort for continued customer satisfaction, evidence-based decision-making, and improved relationship management.


CUSTOM ATTACHMENTS

Arrow’s engineering/manufacturing team is highly experienced in creating custom attachments for unique applications. Our engineers use Solid Works 3D CAD design software but can easily collaborate with your staff in a wide variety of software formats.

Once consensus is achieved on the design, your attachment is manufactured by our team of certified machinists and welders using precision, state-of-the-art CNC machines and robotic equipment. Custom attachments can be made for a wide variety of machines.

Contact Us! Call800-821-7563 for details and pricing


For 50 years, Arrow Material Handling Products has developed a comprehensive dealer network spanning across North America. Our dealer network comprises wholesalers, retailers, and rental houses. Dealers supply multiple industries, including logistics, manufacturing, construction, and land management. Experienced sales and customer service teams provide superior product knowledge and individualized customer care. Additionally, our long-standing relationships with multiple carriers combined with our industry-leading turnaround time at our five distribution centers allows Arrow to consistently fulfill orders quicker than our competition.

FEATURED FORKLIFT DEALERS

FEATURED CONSTRUCTION DEALERS

NORTH AMERICAN DISTRIBUTION

All trademarks, trade names, or logos mentioned or used are the property of their respective owners. Use of them does not imply direct endorsement.



ALASKA HAWAII

Distribution Centers

Dealers

Norfolk,VA

Houston, TX

Mississauga, Ontario, Canada

Compton, CA

Lenexa, KSHeadquaters


INDUSTRIAL » Warehouse forklifts » Industrial applications

» Manufacturing » Food Processing » Petro-Chemical » Food & Beverage » Scrap Metal

CONSTRUCTION/RENTAL » Equipment Types

» Skid and track loaders » Telehandlers » Backhoes » Compact excavators » Rough terrain forklifts » Wheel loaders

MATERIAL HANDLING MARKETS WE SERVE

Contact Us at 800-821-7563 or contact us at [email protected]


Arrow makes attachments that fit a variety of loaders, forklifts, telehandlers, and more. Find machines and their compatible attachments in the chart above.

p.51 p. 36 p. 39-40 p. 42-46 p. 48-50 p. 20-27 p. 52-57 p. 52-57 p. 60-63 p. 64 p. 66 p. 67 p. 68

FORKLIFTS X X X X X X X X X X XSKID STEERS X X X X X X X X X X X

MINI SKID STEERS X X X X X X XTELEHANDLERS X X X X X X X X X X

EXCAVATORS XWHEEL LOADERS X X X X X X XROUGH TERRAIN

FORKLIFTS X X X X X X X XTRACTORS X X X X X XCOMPACT

EXCAVATORS X

Asph

alt C

utte

rs

Boom

s

Fork

& F

ram

es

Trai

ler S

pott

ers

&

Lift

ing

Bars

Auge

r Driv

es &

At

tach

men

ts

Buck

ets

Fork

s

Gra

pple

s

Tras

h H

oppe

rs

Car

pet P

oles

&

Rug

Ram

s

Fram

es

Side

Shi

fter

s

Wor

k Pl

atfo

rms

XX

X

X

X

X

X

X

X

X

X

X

ATTACHMENTS BY MACHINE


NEW IN 2019: FORKLIFT ATTACHMENTS

ARROW is pleased to introduce a NEW line of Forklift Attachments through a partnership with PREMIERE GERMAN MANUFACTURER

Call 800-821-7563 for details and pricing

THE EXPANDED LINE INCLUDES: » Side Shifters » Fork Positioners » Carton / Appliance Clamps » Clamps » Multi-Pallet Handlers » Push-Pulls » Rotators » Telescopic Forks


Visit the ALL NEW ArrowMHP.com for up-to-date information on the latest

products, news, and information.

NEED HELP DETERMINING THE EXACT FORK SPECIFICATIONS FOR YOUR BUSINESS?

Use the Fork Selection tool within each fork type – narrow down your selection by length, capacity, width, thickness, and class.

ARROWMHP.COM

Visit ArrowMHP.com Today!


FOR

KS


» More than 20,000 forks in stock. » Wide variety of types and sizes. » Made-to-order engineered forks in as little as three days. » Arrow carries forks and attachments for most

model forklifts, skid steers, loaders, telehandlers, excavators, tractors, and backhoes; including large, medium, compact, and mini.

FORK VARIETYFO

RK

VAR

IETY



FORK WEAR INDICATOR

Thickness Width Length Class

1.25 in 4 in 36, 42, 48 in II

1.5 in 3 in 48 in II

1.5 in 4 in 32, 36, 40, 42, 48, 54, 60, 72 in II

1.5 in 5 in 36, 42, 48, 54, 60, 72 in II

1.5 in 5 in 48 in III

1.75 in 4 in 36, 40, 54 in II

1.75 in 4 in 42, 48, 60, 72 in II & III

1.75 in 5 in 36, 42, 48, 54, 60, 72 in II & III

1.75 in 5 in 84 in III

2 in 4 in 48, 72, 96 in II & III

2 in 4 in 60 in III

2 in 5 in 36, 42, 48, 54, 60, 72, 84, 96 in III

2 in 6 in 36, 42, 54 in III

2 in 6 in 48, 60, 72, 96 in III & IV

2.5 in 6 in 48, 60, 72, 96 in IV

Join in the future of forklift forks. The new standard for identifying fork wear is here. The fork wear indicator makes it easy to quickly determine fork wear so you can plan for replacement and prevent fork-related accidents.

The easy-to-read wear-indication sticker and stamp saves time by eliminating sole reliance on traditional fork calipers. Inspectors now have a clean, clear, and readily-available visual reference for fork wear and system safety.

Fork wear indicators provide a number of benefits and are a standard feature on select Arrow ITA forks.

» Significantly reduce inspection time.

» Be confident in the accuracy of inspections.

» Reduce risk of negligence from wear.

» Lower the possibility of human error.

» Better plan for replacement.

» Prevent vehicle downtime resulting from excessively-worn forks.

» Avoid costly violations and fines.

EXCLUSIVE TO ARROW

*Products are manufactured according to the metric system but are shown in imperial units (inches) for the purposes of this brochure. See conversion table on page 83 for metric units.




STANDARD ITA FORKS

Arrow ITA Forks consistently outperform the competition. Our proprietary, premium-grade, boron-carbon alloy construction has been proven to exceed industry standards and expectations. All Arrow forks are subjected to a full heat-treatment and annealing process, designed to increase performance in even the harshest of conditions. When choosing your next pair of forks–choose Arrow.

Capacity ConfidenceBe confident in your fork’s capacity rating. Arrow forks are rated at industry standard 24 in load center, unlike many competitors.

A Grade Above the RestArrow forks outperformed those of our competitors in a recent industry study conducted by a 3rd party.

Fully Heat-TreatedThe curved tips reduce friction, avoiding costly damage to pallets and products. Our fully heat-treated and annealed construction resists impacts, especially in low temperatures.

[email protected]

ITA CLASS STYLE WIDTHS THICKNESSES LENGTH CAPACITIES PER PAIR

II, III, IV, V

Standard TaperFull-Bottomed Tapered

Top PolishedLumberGypsum

Block/ Brick

2 to 16 in 1 to 6 in 18 to 192 in 1,000 lb to 308,400 lb

50 to 405 mm 25 to 150 mm 457 to 4,877 mm 460 kg to 142,130 kg



FTP CLASS STYLE WIDTHS THICKNESSES LENGTH CAPACITIES PER PAIR

II, III, IV, V

Full-Bottomed TaperedTop Polished

LumberGypsum



Arrow’s Fully Tapered and Polished (FTP) forks are the perfect solution for handling lumber, sheet rock, and other stacked materials. The fully tapered and polished design provides minimum friction, making it easy to handle smooth and fragile materials. All Arrow forks feature a premium-grade steel that’s proven to outperform the competition. Additionally, Arrow forks undergo a full heat-treatment and annealing process, designed to increase performance in low temperatures and harsh conditions.

Fully Tapered and PolishedMove lumber, sheet rock, and other stacked materials with ease.

Less FrictionStop fighting friction with this fully tapered and polished design.

Made to LastResist impacts, especially in low temperatures, with a fully heat-treated and annealed construction.

FTP FO

RKS

FTP FORKS


800-821-7563Arrowmhp.com

[email protected]


BLANK FORKS

BLANK FORKS have no mounting system as a COST-EFFECTIVE SOLUTION for companies or individuals with fabrication capabilities.

[email protected]

STYLE WIDTHS THICKNESSES LENGTH CAPACITIES PER PAIR

Standard TaperFull-Bottomed Tapered

Top PolishedLumberGypsum

Block/ Brick



Choice & SelectionSelect from more than 375 different sizes with capacities ranging from 1,000 to 308,400 lbs.

A Grade Above the RestArrow Forks outperformed those of our competitors in a recent industry study.

Fully Heat-TreatedResist impacts–especially in low temperatures–with a fully heat-treated and annealed construction.



BLO

CK

FOR

KS

BLOCK FORKS

CROSS SECTION

TYPICAL LENGTHS

MOUNTING OPTIONS

FORK TIPS

CAPACITY PER FORK

2 x 1.5 in Up to 48 in ITA Clip, Nonstandard Clip, Shaft Mount, Blank

Custom tips available

1,600 lb each

2 x 2 in Up to 48 in 2,200 lb each

Arrow Block Forks are designed to move blocks or bricks around a job site. All block forks are built-to-order and are priced and sold individually. Custom choices include a variety of mounting options (ITA clip, nonstandard clip, shaft mount, or blank) and fork tips.

Precision OrderingAll Arrow Block Forks are priced and sold individually and built-to-order, providing you with a huge variety of mounting options and/or fork tips.

Premium QualityArrow forks are made from high-strength boron-carbon alloy steel.

Fast ProductionIn stock and ready to ship in as little as 5 working days.

CUSTOM LENGTHS AVAILABLE UPON REQUEST



BUCKET FORKS

These heavy-duty forks are made of carbon steel with boron-carbon alloy steel and are heat-treated to perform in even the toughest conditions. Once the hooks are installed, Arrow Bucket Forks can be mounted in just seconds. Fork spacing can be adjusted to fit both small and large loads. Mounting brackets come in a variety of sizes and shapes to fit just about any bucket.

No Tools RequiredForks mount directly to the bucket without the need for additional tools once hooks have been installed.

Premium-Grade SteelA carbon steel with boron-carbon alloy steel is fully heat-treated to provide the durable construction for which we are known.

Versatility Comes StandardAdjustable fork spacing makes it easy to carry small and large loads.

Any Size, Any ShapeMounting brackets come in a variety of sizes and shapes to fit just about any bucket.

[email protected]

CUSTOM SIZES AVAILABLE

CTI BUCKET FORKS AVAILABLE – SEE PAGE 51


PART NUMBER SIZE FORK EYES SHAFT

SIZEBACK

HEIGHT FORK

CAPACITYQUANTITY/BRACKETS

BUCKETOPENING

BUCKETWIDTH

ID OD

B1500-36 1-3-36 in 1 1/16 in 1.5 in 1 in 30 in 1,500 lb 3 up to 27 in up to 54 in


B3500-42S 150-3-42 in 2 1/8 in 3 in 2 in* 42 in 3,500 lb 3 up to 36 in up to 55 in

B3500-42 150-3-42 in 2 1/8 in 3 in 2 in* 48 in 3,500 lb 3 up to 42 in up to 55 in

B3500-48S 150-3-48 in 2 1/8 in 3 in 2 in 42 in 3,500 lb 3 up to 36 in up to 55 in

B3500-48 150-3-48 in 2 1/8 in 3 in 2 in 48 in 3,500 lb 3 up to 42 in up to 55 in














BU

CK

ET FOR

KS

TURN YOUR BUCKET MOUNTED MACHINE INTO A FORKLIFT!

*Custom Sizes Available *Products are manufactured according to the metric system but are shown in imperial units (inches) for the purposes of this brochure. See conversion table on page 83 for metric units.


TELEHANDLER FORKS

CALL TO REQUEST

A CUSTOM QUOTE BASED ON YOUR MACHINE’S SPECIFICATIONS


Fully Heat-TreatedResist impacts, especially in low temperatures, with a fully heat-treated and annealed construction.

AvailabilityOver 5,000 Telehandler Forks with capacities up to 70,000 lbs in stock to fit the most common machine types.

ARROW TELEHANDLER FORKS fit the most common machines, including:

» JLG

» Skytrack

» Genie

» SkyJack

» Cat

» JCB

» Gehl

Arrow’s Telehandler Forks are made to last with a premium-grade steel that outperforms the competition. All Arrow forks are subjected to a full heat-treatment and annealing process, designed to increase performance in even the harshest of conditions.

All trademarks, trade names, or logos mentioned or used are the property of their respective owners. Use of them does not imply direct endorsement.


FOR

KS

CUSTOM FORKSArrow can design and deliver custom forks to meet the most exacting business requirements or specifications. Our extensive inventory and on-site, certified machinists and welders can build-to-order almost any style of forklift fork within 5 to 15 working days. Custom fork sizes or large quantities of any size fork can be special ordered for delivery within 10 to 13 weeks. Arrow uses a modified 15B37H high-strength, carbon-boron alloy steel in the construction of our premium-quality forks.

Custom Forks Arrow’s custom forks can be designed with a variety of features and mounting solutions, including but not limited to:

Features:

» Tapers

» Bevels

» Tip Profile

» Wear Pad

» Holes

» Back Height

» Length

» Peek-a-boo

» Rubber backing/gypsum

Mounting Styles:

» Shaft

» Eye

» Lugs

» Clips

» Holes

» Inverted

» Negative Drop

CALL TODAY at 800-821-7563

TO DESIGN YOUR CUSTOM FORKS


FORK SHIELD

Fork Shields protect the most vulnerable part of the forklift fork from nicks, gouges, and accidental damage resulting in stress cracks. By using these easily mountable protection devices, forklift forks last significantly longer and protect against costly early replacement. Arrow fork shields come with everything you need for easy installation. Three sizes are available based on the width of your forklift forks.

Install in MinutesFork shields can be installed in a matter of minutes. Mounting materials and instructions included.

Extend the Life of Your Forklift ForkProtect the most vulnerable part of the forklift fork from nicks, gouges, and stress cracks.

Three sizes to choose from4 -inch, 5-inch, and 6-inch widths.

PART NUMBER DESCRIPTION SHIPPING WEIGHT

HS-04-KIT Fits on 4 in Wide Forks 0.75 lb each



AWARD WINNINGPRODUCT EXCLUSIVE TO ARROW

[email protected]


STAMPED WITH LOAD CAPACITY

800-821-7563Arrowmhp.com

[email protected]

Our Heavy-Duty Fork Extensions are built with Grade 50 steel to withstand daily wear. The safety yellow finish and curved tips protect your products and your people. Extensions slide on and off of the existing forks in just seconds. Stamped with the load-capacity rating, every extension features welded retaining straps for forks up to 2 inches (50mm) thick.

PART # WIDTH LENGTH

FE-460 4 in 60 in

FE-472 4 in 72 in

FE-484 4 in 84 in

FE-496 4 in 96 in

FE-560 5 in 60 in

FE-572 5 in 72 in

FE-584 5 in 84 in

FE-596 5 in 96 in

FE-660 6 in 60 in

FE-672 6 in 72 in

FE-684 6 in 84 in

FE-696 6 in 96 in

Made for the Long HaulExtend the reach of your expectations. All fork extensions are built with Grade 50 steel to endure the wear of daily use.

Clear CapacityArrow Fork Extensions are stamped with load capacity directly on the part to ensure safety and compliance.

Protects Your Products and Your ReputationThe curved tips reduce friction, avoiding costly damage to pallets and products.

Very, Very YellowThe safety-focused, powder-coated bright finish.

*See index for all size availability.

Unique Curved Tip

FOR

KS

HEAVY-DUTY FORK EXTENSIONS


Made From GRADE 50 STEEL


ATTAC

HM

ENTS

800-821-7563 | Arrowmhp.com | [email protected] 31800-821-7563 | Arrowmhp.com | [email protected]


AUGER DRIVE FRAME & CRADLE

Holed SteadyThe steady rotation of the drive leaves holes free of excess debris.

Dig DeeperThe sealed, planetary gearbox keeps debris out and maintenance minimal.

More Than Just a DrillWith our Stump Planer and Cement Mixer, the Auger Drive does so much more than drill.

» Made to withstand daily wear and tear.

» The cradle holds the auger steady during travel and while dislodging dirt.

» Universal quick-attach coupler mounts onto most skid loaders.

Do more than just drill. You know that the Arrow Auger Drive can be fitted with a variety of Arrow Auger Bits, but it doesn’t stop there. You can also remove stumps with the Arrow Stump Planer and mix cement with the Arrow Cement Mixer. This drive features a high-performance motor for consistent clean holes and low maintenance.

SHAFT SIZE PART NUMBER DRIVE ONLY PART# COMPATIBILE FOR EQUIPMENT UP TO

2 in Hex Shafts MD-17-20-20-H-334 MD-17-20-20-H 17 GPM flow and accepts bits from 4 to 20 in

2 in Hex Shafts AD-25-30-20-H-UN AD-25-30-20-H 25 GPM flow and accepts bits from 4 to 30 in

2 in Hex Shafts AD-30-36-20-H-UN AD-30-36-20-H 30 GPM flow and accepts bits from 4 to 36 in

2.5 in Hex Shafts AD-35-36-25-H-UN AD-35-36-25-H 35 GPM flow and accepts bits from 6 to 36 in

2.5 in Hex Shafts AD-40-48-25-H-UN AD-40-48-25-H 40 GPM flow and accepts bits from 6 to 48 in

2.56 in Round Shafts AD-25-30-20-R-UN AD-25-30-20-R 25 GPM flow and accepts bits from 4 to 30 in

2.56 in Round Shafts AD-30-36-20-R-UN AD-30-36-20-R 30 GPM flow and accepts bits from 4 to 36 in

CUSTOM HITCHES AVAILABLE FOR

EXCAVATOR APPLICATIONS

[email protected]


AUGER DRIVE FRAME AND CRADLE AU

GER

BITS

AUGER BITSDig with strength and precision using Arrow Auger Bits. Fully welded, shallow-pitch flights not only last longer but also leave holes free of excess debris. Bits fit both hex and round mounts and can be fitted with a variety of interchangeable teeth for almost all ground conditions.

Durable DiggingDig with confidence. Our Auger Bits feature fully-welded flighting for increased durability. Rock Bits will dig in both soft and hard soil conditions.

Precision Forward DesignShallow-pitch flights dig with precision and leave no excess debris behind.

A Flexible SolutionArrow Auger Bits are made to fit both hex and round mounts and are fitted with interchangeable teeth for a variety of ground conditions.

2 in HEX BITS - 48 in LONG 2.56 in ROUND BITS - 48 in LONG 2.5 in HEX BITS - 60 in LONG

Auger Diameter Earth Bits Rock Bits Auger Diameter Earth Bits Rock Bits Auger Diameter Earth Bits Rock Bits

4 in (100 mm) AA-04-20-HD-H AA-04-20-RB-H 6 in (154 mm) AA-06-20-HD-R AA-06-20-RB-R 6 in (154 mm) AA-06-25-HD-H AA-06-25-RB-H







24 in (610 mm) AA-24-20-HD-H AA-24-20-RB-H - - - - - - 30 in (762 mm) AA-30-25-HD-H AA-30-25-RB-H



- - - - - - - - - - - - 48 in (1219 mm) AA-48-25-HD-H AA-48-25-RB-H



AUGER BIT TEETH & PILOTS

Arrow Auger Bit Teeth fit a diverse range of applications and ground conditions. Standard teeth are great for general purpose conditions; tungsten works best for more difficult applications; and rock teeth are made for the toughest jobs. Our teeth are easy to replace and feature a patented tooth-locking system, designed to reduce fracturing by utilizing a rubber shock absorption strip. A simple drive-in locking pin keeps the teeth attached, preventing them from falling into the hole when reversing the auger.

Patented Tooth-Locking SystemSystem keeps teeth locked in to resist tooth loss due to shock fractures.

Standard TeethGreat for general purpose applications, such as soft ground, dirt, or clay.

Tungsten TeethPerfect for more difficult ground conditions, such as compact soil, frozen ground, and asphalt.

Rock TeethMade for the hardest and most abrasive materials.

DESCRIPTION TEETH PILOT KIT

2 in Hex Bits or 2.56 in Round Bits ATK-HD-20 APK-HD-20

2.5 in Hex Bits ATK-HD-25 APK-HD-25

Tungsten-Carbide 2 in Hex or 2.56 in Round Bits ATK-TN-20 APK-TN-20

Tungsten-Carbide 2.5 in Hex ATK-TN-25 APK-TN-25

Rock 2 in Hex Bits or 2.56 in Round Bits ATK-RB-20 APK-RB-20

Rock 2.5 in Hex Bits ATK-RB-25 APK-RB-25

TUNGSTON TOOTH

ROCK TOOTH

PILOT BIT

STANDARD TOOTH

[email protected]


AU

GER

STUM

P P

LAN

ER

AUGER DRIVE STUMP PLANERSave money on stump removal. Switch out your Arrow Auger Drive Bits for an Auger Drive Stump Planer attachment. The Arrow Stump Planer removes stumps without the cost or noise of a traditional stump grinder. After the stump is removed, cleanup is easy since the shavings stay in a compact pile.

Just a MomentMount the Planer directly onto the drive hub in just seconds.

Pennies on the DollarRemove stumps quickly and efficiently without investing in a traditional stump grinder.

MODEL SHAFT DIAMETER LENGTH UNIT COMPATIBLE AUGER DRIVES

REPLACEMENTBLADE

ASP-10-20-H 2 in HEX 10 in 25 in 55 lbMD-17-20-20-HAD-25-30-20-HAD-30-36-20-H

AMP-4-009

ASP-10-20-R 2.56 in Round 10 in 25 in 55 lb AD-25-30-R-UNAD-30-36-R-UN AMP-4-009

ASP-14-25-H 2.5 in HEX 14 in 27 in 73 lb AD-35-36-25-H-UNAD-40-48-25-H-UN AMP-4-010

AUGER DRIVE CEMENT MIXERAttach the Arrow Cement Mixer directly to your Arrow Auger Drive. Finish the job in one trip with a capacity of up to three bags of cement mix. Bring cement to places not accessible to traditional concrete trucks. Combine with Arrow Auger bits for quick post fixing.

Have Cement, Will TravelGo where traditional concrete trucks cannot.

Post UpFixing posts is simple when combined with Arrow Auger Bits.

CAPACITY DIAMETER DEPTH SKID STEER MOUNT47 Gallons 28 in 28 in AMBC-2030-20

* Must purchase mixer drum cradle AMB-47-20-H for proper usage.


AUGER DRIVE SHAFT EXTENSION

Arrow’s Auger Extensions extend the reach of the Arrow Auger Drive. Extensions attach to the drive hub in just seconds and are available in both hex and round mounts. Multiple lengths are available from 24 inches to 100 inches. Extensions provide added flexibility for a variety of different applications.

Reach FartherAuger Extensions allow you to reach farther and dig deeper.

Ready in No TimeMount the extension directly onto the drive hub in just seconds.

Wide SelectionExtensions come in multiple lengths, providing additional flexibility for a variety of applications.

SHAFT EXTENSION LENGTH

2 in Hex AE-24-20-H 24 in

2 in Hex AE-48-20-H 48 in

2.5 in Hex AE-60-25-H 60 in

2.5 in Hex AE-80-25-H 80 in

2.5 in Hex AE-100-25-H 100 in

2.56 in Round AE-24-20-R 24 in

2.56 in Round AE-48-20-R 48 in

AUGER DRIVE SHAFT ADAPTERSEffectively adapt hex and shaft mount drives with Auger Shaft Adapters. Made of the same high-quality steel used in the construction of the Auger Drive, Auger Shaft Adapters feature a pin-locking design for added durability.

VersatileAdapt both hex and shaft mount drives.

Premium-QualityMade of same high-quality steel as Auger Drive.

High-PerformancePin-lock design keeps attachments secure.

PART NUMBER FEMALE MALE

SA-HX-20/RD-20 2.0 in HEX 2.0 in RND

SA-HX-20/RD-26 2.0 in HEX 2.56 in RND

SA-HX-25/HX-20 2.5 in HEX 2.0 in HEX

SA-RD-20/HX-20 2.0 in RND 2.0 in HEX

SA-RD-26/HX-20 2 .56 in RND 2.0 in HEX



EXTENSION BOOMS

Move trees, trusses, and other awkward materials with Arrow’s heavy-duty Extension Booms. Always find the perfect balance between load capacity and reach by utilizing the boom’s eight different hook positions. The Arrow Extension Boom can fit a variety of fork sizes, making it easy to use with a variety of machines. The tubular design and built-in safety systems keep this boom lightweight, durable, and safe.

Find a BalanceFind the perfect balance between load capacity and reach with eight different hook positions.

Built-in SafetyBe confident your load is secure with the included safety hook and chain or pin-behind forks.

CAPACITY (LB) AT HOOK POSITION

HookPosition

Max Fork Size

1 42 in

256 in

370 in

483 in

598 in

6112 in

7126 in

8139 in Weight

CE20 2.25 x7 in 4,500 3,500 2,500 2,000 1,600 1,350 1,150 1,000 299

CE60-TH-STP 3.25 x 7 in 13,000 10,000 7,000 6,000 4,700 4,000 3,400 3,000 433

CE100 3.25 x 9 in 13,000 12,000 11,000 10,000 7,500 6,200 5,100 4,500 920



RIGID BOOMSRigid Booms are ideal for handling trees, trusses, or awkward materials and equipment in areas not reachable by machine. The tubular form makes for a lightweight yet rugged lifting mechanism. Rigid Booms are best applied in landscaping, construction, and manufacturing.

CAPACITY- AT HOOK POSITION

HookPosition

1 26 in

236 in

348 in

450 in Weight

C100 10,000 356 lb

Reach Beyond Your Machine’s LimitsRigid Booms are an effective solution when handling trees, trusses, or awkward materials and equipment in areas not reachable by machine.

Maximize Lifting CapacityArrow tubular form makes for a lightweight yet rugged lifting solution.

JIB BOOMSArrow Jib Booms make it easy to move bulky and nonpalletable items safely since the boom is designed to stabilize the load. The angled design increases visibility, allowing the operator to be more precise. The Arrow Jib Boom allows your machine to reach farther than before with a 72-inch lift height and 66 inches of horizontal reach. For use with skid steers when handling trees, timber, and more.

MODEL CAPACITY HORIZONTAL REACH

CJ10UN 1,000-1,600 lb 66 in

CJ25UN 2,500-3,750 lb 72 in

Steady LiftingMove bulky nonpalletable items safely since the boom is designed to stabilize the load.

Angled for PrecisionMake precise movements with increased visibility due to the boom’s angled design.

BO

OM

S


TRUSS BOOMS The Arrow Truss Boom provides a clear line of sight, allowing for accurate positioning of truss and other bulky material. The built-in pintle hook with safety latch keeps the truss secured to boom, increasing safety. Additionally, the lightweight but durable design preserves the load capacity of your machine. Arrow Truss Booms fit telehandlers, wheel loaders, and skid steers, and are available in fork, quick-attach, and telehandler coupler variations.

It’s All in the NameLift and position truss with this residential construction must-have.

Keep Loads SecureA built-in safety system protects and secures your load to the boom.

More than a Couple CouplersAvailable in fork, quick-attach, and telehandler variations.

MOUNT TYPE PART # LENGTH CAPACITY LOADCENTER

CENTER OF GRAVITYWEIGHT

HORIZONTAL VERTICAL

Fork Mount 1000100-12-F 12 ft 2,000 lb 144 in 52.5 in 5.9 in 481 lb

Coupler Mount *1000100-12-_ _ _ 12 ft 2,000 lb 144 in 48.4 in 13 in 505 lb

Coupler Mount *1000100-15-_ _ _ 15 ft 2,000 lb 180 in 58.7 in 10 in 628 lb

Skid Steer UQA 1000131-12-01 12 ft 1,000 lb 144 in 35.5 in 9.4 in 250 lb




SKID STEER BUCKETS

Heavy-duty Arrow Skid Steer Buckets are made for all-weather digging and moving dirt, fertilizer, and other material. The radiused bottom with square, reinforced heel is great for back-dragging. The four bottom skid plates and two side plates provide added durability. Additionally, the low-profile design allows for increased visibility. All Arrow Skid Steer Buckets are predrilled to allow optional bolt-on reversible cutting edges.

Built to LastFour bottom skid plates and two bucket endplates resist wear.

Heavy-Duty DurabilityReinforced bucket construction adds strength and durability.

See More, Be SafeLow-profile design allows for increased visibility.

PART NUMBER

INSIDE WIDTH

OUTSIDE WIDTH

CUBICYARD

CUTTING EDGE WEIGHT

2306004WUN 60 in 62 in .4 Welded 426 lb




2306004BUN 60 in 62 in .4 Bolt On 465 lb




*Add a “T” to the end of the part number for standard teeth, add “T-F” for flush mount teeth.


Stand Up Buckets (also known as Mini Skid Steer Buckets) are designed to bring the same high-quality performance of a full-size bucket to walk behind skid steers. Small Machine Buckets feature a reinforced construction with added strength at the bucket radius and added support at the bucket heel. Four additional skid plates are located on the bottom of the bucket, as well as two on the side, to protect against hard materials.

When you need a bucket to move mulch, snow, wood shavings, gravel and other light materials, Arrow’s mulch bucket is an excellent choice. The bucket’s unique design allows for easy removal of material. The window gives the operator increased visibility. The inside of the bucket is fully welded for added strength and to prevent rusting in the seams.

Strong and FunctionalReinforced bucket radius adds strength and makes clean out simple.

Back Drag AwaySquare reinforced heel provides additional support. Great for back dragging.

Optional Teeth AvailableA wide variety of teeth are available. See page 47 for comprehensive bucket teeth assortment.

STAND UP BUCKET

MULCH BUCKET

BU

CK

ETS

CALL 800-821-7563 FOR DETAILS AND PRICING


GRAPPLE BUCKET

The Skid Steer Grapple Bucket functions the same as Arrow Skid Steer Buckets with the addition of grapple arms. The Grapple Bucket is great for moving scrap, logs, lumber, and bulky materials. Individual 3,000 PSI hydraulic cylinders power two 0.75 in steel grapple arms. The four bottom skid plates and two reinforced side plates provide added durability. Additionally, the low-profile design allows for increased visibility while the 42 inches of height increases capacity.

Built to LastTwo 2 in 3,000 PSI heavy-duty cylinders with cylinder guards ensure long-term use without damaging cylinders.

Heavy-Duty DurabilityGrapple arm hinge points use self-lubricating bronze bushings.

See More, Be SafeLow-profile design allows for increased visibility without sacrificing capacity.

PART NUMBER

CUTTINGEDGE

OUTSIDE WIDTH

BUCKET DEPTH

CUBICYARD

HEIGHT CLOSED

HEIGHT OPEN

INSIDE OPENING

WEIGHTESTIMATE

2306605WUNG Weld On 66 in 30 in .6 28 in 47 in 42 in 820 lb


2306605BUNG Bolt On 66 in 30 in .6 28 in 47 in 42 in 820 lb

2307206BUNG Bolt On 72 in 30 in .7 28 in 47 in 42 in 840 [email protected]



FOR

K M

OU

NTED

BU

CK

ET

FORK MOUNTED BUCKETThe heavy-duty Fork Mounted Bucket is perfect for quick small jobs. Just mount the bucket directly to your pre-existing forks. Telehandler operators love this bucket’s ability to quickly collect materials from high, hard-to-reach places. Additionally, the reinforced construction adds to the bucket’s durability and extends its service life.

Fork MountableSlide the bucket directly onto your preexisting forks and pin behind forks to secure bucket in place.

The Fastest Bucket AroundThe fork-mounted design makes this bucket perfect for small jobs with little time.

A Telehandler FavoriteTelehandler operators love this bucket’s ability to quickly collect materials from high, hard-to-reach places.

PART NUMBER

CUBIC YARD STRUCK INSIDE

WIDTHOUTSIDE

WIDTH HEIGHT DEPTH CUTTING EDGE WEIGHT

3206015WFM 1.5 1.1 58.5 in 60 in 29 in 54 in Welded 675 lb

3207218WFM 1.8 1.4 70.5 in 72 in 29 in 54 in Welded 795 lb

3209625WFM 2.5 1.9 94.5 in 96 in 29 in 54 in Welded 1,025 lb

3206015BFM 1.5 1.1 58.5 in 60 in 29 in 54 in Bolt On 675 lb

3207218BFM 1.8 1.4 70.5 in 72 in 29 in 54 in Bolt On 795 lb

3209625BFM 2.5 1.9 94.5 in 96 in 29 in 54 in Bolt On 1,025 lb



TELEHANDLER BUCKET

The Arrow Telehandler Bucket is an industry favorite for telehandler operators. Side and bottom skid plates help resist wear, extending the bucket’s lifespan. Additional reinforcement provides the bucket with more capacity for larger loads. The bucket also features a radiused inside for easy cleanout.

* Telehandler Buckets have the option to add standard or flush mount teeth. Call a representative today to help you with your order.

No Wear to Be FoundSide and bottom skid plates help resist wear.

Increased CapacityAdditional reinforcement provides the bucket with more capacity for larger loads.

Easy EmptyCleanout is simple with the bucket’s radiused design.

PART NUMBER

OUTSIDE WIDTH

CUBICYARD

CUTTING EDGE WEIGHT

3207212W _ _ _ 72 in 1.2 Welded 710

3207212B _ _ _ 72 in 1.2 Bolt On 781

3209615W _ _ _ 96 in 1.5 Welded 910

3209625W _ _ _ 96 in 2.5 Welded 1,135

3209615B _ _ _ 96 in 1.5 Bolt On 1,005

3209625B _ _ _ 96 in 2.5 Bolt On 1,231

Can add QUICK ATTACH COUPLER

within 5 to 7 WORKING DAYS

[email protected]


Hard jobs that involve dragging, sliding, and excessive friction will damage cutting edges and teeth over time. It is far less expensive to replace the edges and teeth than the entire bucket.

Spill Guards protect the machine and operator from bucket debris spilling over the back of the bucket while extending the height of the bucket. Added bonus -- extending height results in greater cubic capacity.

Extend the Life of Your BucketReplace teeth and edges versus entire buckets!

Increase FeaturesAdding a spill guard protects machine and operator from debris spillovers and increases cubic capacity at the same time.

In Stock, No WaitingMinimize downtime with in-stock inventory of all Arrow bucket accessories.

BU

CK

ET AC

CES

SO

RIES

2300 - Tooth Standard

2AF - Crimp-On Tooth Adapter

230WO - Short Shank Adapter

2300C - Tooth Tiger Point

231WO - Long Shank Adapter

2A - Crimp-On Tooth

2300FL - Flush-mount Adapter

23TW - Tooth Twin Tiger

230ST - Tooth Star 230PN - Pin

BUCKET ACCESSORIES



CARRIAGE MOUNT CARPET POLES

Move carpet and coiled materials with ease. Arrow Carpet Poles attach in just seconds without the need for special tools or costly adapters. Our Carpet Poles feature a unique design. Weight is equally distributed throughout the pole, reducing stress and extending lifespan.

Need it NOWUsually available for next-day shipment.

No Tools RequiredCarpet Poles attach directly to your forklift without the need for specialty tools or costly adapters.

A Balancing ActDesigned to equally distribute weight across the entire length, Arrow Carpet Poles have an extended lifespan.

Fits ITA Class II and III carriages.

MOUNT DIAMETER CLASS LENGTH PART

NUMBERCAPACITY AT

LOAD CENTER*SHIP

WEIGHT

2.5 in II 9 ft 5020-9 1,500 lbs 269 lb

2.5 in II 10 ft 5020-10 1,500 lb 285 lb

2.5 in II 11 ft 5020-11 1,500 lb 301 lb

2.5 in II 12 ft 5020-12 1,500 lb 317 lb

2.5 in III 9 ft 5030-9 1,500 lb 269 lb

2.5 in III 10 ft 5030-10 1,500 lb 285 lb

2.5 in III 11 ft 5030-11 1,500 lb 301 lb

2.5 in III 12 ft 5030-12 1,500 lb 317 lb

3 in II 9 ft 5060-9 2,200 lb 336 lb

3 in II 10 ft 5060-10 2,200 lb 360 lb

3 in II 11 ft 5060-11 2,200 lb 384 lb

3 in II 12 ft 5060-12 2,200 lb 408 lb

3 in III 9 ft 5070-9 2,200 lb 336 lb

3 in III 10 ft 5070-10 2,200 lb 360 lb

3 in III 11 ft 5070-11 2,200 lb 384 lb

3 in III 12 ft 5070-12 2,200 lb 408 lb

*Rated at 96 in load center.


FORK MOUNTED CARPET POLES

Fits forks size up to 2 x 6.

CA

RP

ET PO

LES

Move carpet, rolled, and coiled materials quicker than ever with Arrow’s Fork Mount Carpet Pole. Enjoy an extended lifespan due to efficient weight distribution, engineered to minimize load center loss. This provides superior capacity and safety ratings. The Arrow Fork Mount Carpet Pole attaches in just seconds without the need for additional tools and costly adapters.

Quick To MoveMove carpet, rolled, and coiled materials quicker than with the fork, mount design.

No Tools RequiredMounts directly to your machine without the need for additional tools or costly adapters.

Efficient Weight DistributionEnjoy an extended lifespan due to efficient weight distribution, engineered to minimize load center loss.

MOUNT DIAMETER LENGTH PART

NUMBER CAPACITY* SHIP WEIGHT

2.5 in 9 ft 6020-9 1,500 lb 462 lb

2.5 in 10 ft 6020-10 1,500 lb 478 lb

2.5 in 11 ft 6020-11 1,500 lb 494 lb

2.5 in 12 ft 6020-12 1,500 lb 510 lb

3 in 9 ft 7630-9 2,200 lb 539 lb

3 in 10 ft 7630-10 2,200 lb 563 lb

3 in 11 ft 7630-11 2,200 lb 587 lb

3 in 12 ft 7630-12 2,200 lb 611 lb

*Rated at 96 in load center.



LOW-PROFILE CARPET POLE

Arrow’s Low-Profile Carpet Pole is the perfect solution for those looking to maximize their machine’s reach without losing visibility. This is all thanks to a sleek, thin design. Attach in just seconds without the need for additional tools or costly adapters. Arrow’s Low-Profile Carpet Pole is known for its efficient weight distribution, engineered to maximize load capacity and exceed safety standards.

Reach Even FartherMaximize your machine’s lift height with the low-profile design.

Maximum VisibiltyMaintain an undisturbed line of sight due to the sleek, thin construction.

Need it NowUsually in-stock and available to ship next day.

MOUNT DIAMETER LENGTH PART

NUMBER CAPACITY* SHIP WEIGHT

2.5 in 9 ft 8025-9 1,500 lb 328 lb

2.5 in 10 ft 8025-10 1,500 lb 345 lb

2.5 in 11 ft 8025-11 1,500 lb 510 lb

2.5 in 12 ft 8025-12 1,500 lb 525 lb

3 in 9 ft 8030-9 2,200 lb 405 lb

3 in 10 ft 8030-10 2,200 lb 428 lb

COIL RAMDesigned to move coils of steel or other heavy materials. All Coil Rams are made-to-order.

CALL 800-821-7563 TO ORDER YOURS TODAY

*Rated at 96 in load center. Fork pockets fit fork sizes 2.25 in x 6 in


CTI P

RO

DU

CTS

ASPHALT CUTTERS

CLAMP-ON BUCKET FORKS

CTI BUCKET FORKS

FOUR-IN-ONE BUCKET FORKS

EASY to USE CLAMP ON ATTACHMENTS

Arrow’s Asphalt Cutter provides easy clamping with four-point contact and built-in handle. The replaceable cutting wheel is made of heat-treated, abrasive-resistant alloy steel encased in a high-durability steel frame. Three options ensure an option to fit your bucket, grader moldboard, or skid steer.

Clamp-on bucket forks are a lightweight option that will turn your bucket or wheel loader into a forklift. Made from solid steel, clamp-on forks are fast and easy to mount. Stabilize forks spread loads across a wide area. Lift capacity up to 3,400 lbs at 24 in load center.

Bucket Forks attach in seconds and have adjustable tine spacing. These forks will fit on almost any loader to increase your machine’s versatility. Forks fit buckets with or without teeth. Can be used on multiple loaders. Lift capacity up to 5,400 lbs at 24 in load center.

Arrow’s Four-in-One Bucket forks have the unique ability to grab and hold many things, including attachments. Made for specific machines, including Caterpillar, Komatsu, John Deere, and Case. Forks are easy to mount, require no welding, screws, or holes in your bucket. Rigid mounts are easy to operate. Lift capacity up to 6,000 lbs at 24 in load center.


SKID STEER FORK AND FRAMES

Arrow Pallet Fork and Frames feature a heavy-duty frame engineered to sustain the impact of everyday use. Our forks are made of a premium-grade steel that outperforms the competition. Choose from Class II and Class III variations to find the right fit for your machine. Arrow Pallet Fork and Frames come in 36 in to84 in widths, with and without hydraulics, and capacities from 1,500 to 9,000 lbs.

Multiple SolutionsFrom hydraulics to capacities, choose from 17 different variations to find the right fit for your machine.

Outlast the CompetitionThe heavy-duty steel construction is built to work as hard as you do.


CUSTOM STYLES AVAILABLE

F5400F5100WTF5000WT

F5000

F5100G



FOR

K A

ND

FRA

MES




F5200HDF5560F5572F5584

F4300 F5300

F5100


TELEHANDLER FORK AND FRAMES

Arrow’s Telehandler Pallet Forks fit almost any brand machine with a quick-coupler or pin-on mount. Highly customizable, standard builds offer a wide range of frame and fork sizes and styles. The heavy-duty construction with an extended load backrest offers excellent load stability and operator visibility. Infinite options available through custom-build options, including swinging forks, tilting style frames, ITA style, fork positioners, and grapple arms.

Heavy-Duty ConstructionOptions range from 6,000 to 40,000 lb capacities all made from Arrow’s premium, high-strength boron-carbon alloy steel.

Improved OperationsThe extended load backrest offers excellent load stability and operator visibility.

Infinite OptionsChoose from a wide variety of frame and fork sizes and styles, or customize for unique requirements.

Twist and TurnArrow can add Swing Carriages, Fork Positioners, Side Shift and Side Tilt to most Telehandler Fork and Frame assemblies.

F6400

F6300G2F6300G1F6200





WHEEL LOADER FORK AND FRAMES

Arrow’s heavy-duty Wheel Loader Fork and Frames are ideal for handling long lengths of pipe, structural steel, beams, lumber or any large objects with sizes up to 144 in wide. Low-profile assemblies are designed for maximum visibility. Can be used on most models of wheel loaders with quick couplers or pin-on mounts.

Heavy Duty ConstructionOptions range from 6,000 to 40,000 lb capacities, all made from Arrow’s premium, high-strength boron-carbon alloy steel.

Improved OperationsThe extended load backrest offers excellent load stability and operator visibility.

Infinite OptionsChoose from a wide variety of frame and fork sizes and styles, or customize for unique requirements.

Twist and TurnArrow can add Swing Carriages, Fork Positioners, Side Shift and Side Tilt to most Wheel Loader Fork and Frame assemblies.

CALL TODAY at 800-821-7563 TO DESIGN YOUR CUSTOM FORKS

F9300

F7300F7200 F8300



FOR

K A

ND

FRA

MES

F5947F5960

Arrow’s Ag Frame is designed specifically for customers in the Ag industry – comes standard with quick coupler plates to attach to a tractor, or can be made to direct pin-on to loader arms. Don’t let the lightweight design fool you – this frame can lift up to 4,500 lbs. The backrest stabilizes loads and protects operators from errant debris.

AG FRAMES

* Comes standard with mini universal coupler, however, other couplers or pin-on hitches are available.

PART # WIDTH WEIGHT CAPACITY ADJUSTABLE FORK SPREAD

F3036* 36 in 126 lb 1,500 lb 0 – 35 in

F3040* 40 in 137 lb 1,500 lb 0 – 39 in

F5847F5860

F5000-204

MINI FORK AND FRAMES

F3036F3040

Arrow’s Mini Pallet Fork and Frames might be lightweight coming in under 200 lbs, but can still deliver excellent service with their 1,500 lb capacity assemblies. Made with mini universal coupler, however, other coupler/hitches are available. This durable frame accepts standard ITA Class II Forks.


1,500 lb Capcity

1,500 lb Capcity

1,500 lb Capcity4,500 lb Capcity


Arrow’s Grapple Pallet Forks provide extra security when tipping loads slightly backwards, as well as traveling over uneven terrain or obstacles. Excellent for grabbing logs, pipes and other long materials as well as large brush and debris cleanup. From skid steers to telehandlers, fits most machine makes and models with quick-coupler or pin-on mounts. All come with single or dual grapple arms with optional grapple tip configurations.

Excellent ControlDual-flow control valves to adjust arm closure speed.

More Than One JobGrab both long materials like logs or pipes as well as large brush and debris without changing attachments.

Large Load – No Problem!Grapple arms open to 72 in height to accept tall loads or pallets.

GRAPPLE PALLET FORKS

CALL TODAY at 800-821-7563 FOR ORDER INFORMATION AND PART NUMBERS

GRAPPLE BUCKETS

F6300G2


GR

AP

PLES

The Skid Steer Grapple Bucket functions the same as Arrow’s Skid Steer Buckets with the addition of grapple arms. The Grapple Bucket is great for moving scrap, logs, lumber, and bulky materials. Individual 3,000 PSI hydraulic cylinders power two heavy-duty grapple arms. The four bottom skid plates and two reinforced side plates provide added durability. Additionally, the low-profile design allows for increased visibility while the 42 in height increases capacity.

Built to LastTwo 2 in 3,000 PSI heavy-duty cylinders with cylinder guards ensure long-term use without damaging cylinders.

Heavy-Duty DurabilityGrapple arm hinge points use self-lubricating bronze bushings.

See More, Be SafeLow-profile design allows for increased visibility without sacrificing capacity.

PART NUMBER

CUTTINGEDGE

OUTSIDE WIDTH

BUCKET DEPTH

CUBICYARD

HEIGHT CLOSED

HEIGHT OPEN

INSIDE OPENING

WEIGHTESTIMATE





GRAPPLE BUCKETS

CAN ALSO BE CONFIGURED

FOR MOST TELEHANDLERS


COMPACT SKID STEER BUCKET GRAPPLES

The Compact Skid Steer Grapple Bucket functions the same as Arrow’s Skid Steer Buckets with the addition of grapple arms. The 36 or 42 in wide bucket will fit through a standard gate; great for landscaping work with compact skid steers and compact tractor loaders. Reinforced bucket edges provide added durability.

Grab-N-Go2 in cylinder ensures strong load clamping.

Heavy-Duty DurabilityReinforced bucket edges provide added durability.

Fit Through Tight SpacesThe 36 or 42 in wide bucket will fit through a standard gate, great for landscaping work.

COMPACT SKID STEER GRAPPLE RAKEThe Arrow Compact Skid Steer Grapple Rake fits most brands of stand-up skid steer loaders and tractor loaders. The 41.38 in wide rake fits through a standard gate; great for narrow spaces. Grapple rakes are an excellent tool for handling brush, branches, and landscaping materials. The 2 in cylinder delivers high clamping force.

VersatileFits most brands of stand up skid steer loaders and tractor loaders.

Fit Through Tight SpacesThe 41.38 in wide rake will breeze through narrow spaces.

[email protected]



GR

AP

PLES

BRUSH AND ROOT GRAPPLESArrow Brush and Root Grapples offer heavy-duty cleanup solutions for skid steers. Every tine is constructed from one piece of high-grade steel, ensuring long-lasting performance in the harshest conditions. NitroSteel rods resist corrosion, dents, and flakes, and Teflon-coated bushings keeps the jaw hinge lubricated. Brush and Root Grapples come standard with universal quick-attach couplers, but custom couplers can be built-to-order upon request.

Rigid DesignEvery tine is constructed from one piece of high-grade steel.

Built to LastTeflon-coated bushings keeps jaw hinge lubricated; NitroSteel rods resist corrosion, dents, and flakes.

High VisibilityTine spacing provides operator with excellent vision.

MODELS WIDTH DEPTH HEIGHT # OF TINES

SPACE BETWEEN TINES

TINE THICKNESS

GRAPPLE ARM THICKNESS

GRAPPLE OPENING

APPROXIMATE WEIGHT

23072RUNG 72 in 37 in 20.5 in 9 tines 8.5 in 0.5 in 0.5 in 35 in 805 lb

23084RUNG 84 in 37 in 20.5 in 10 tines 8.9 in 0.5 in 0.5 in 35 in 850 lb


PIPE GRAPPLES

Arrow Pipe Grapples, with a heavy-duty capacity of up to 26,000 lbs are designed to efficiently, quickly, and safely move bulk items and expertly handle installation of utility poles and gas lines. All pipe grapples are designed and built to customer specifications. We can customize the size to your frame, fork dimensions, and coupler.

Safe, Efficient, and Time-SavingArrow Pipe Grapples clamp down easily on the entire load, allowing handlers to save time moving large quantities of poles and pipes.

Fully EquippedStandard 3,000 PSI hydraulics and equipped with a unique sequence valve to control arms so only one set of auxillary hydraulics are needed.

FlexibilityArrow Pipe Grapples fit most telehandlers or wheel loaders.

Fits most telehandlers or wheel loaders.Clamps down easily on the entire load.Great for heavy-duty capacities of up to 26,000 lbs.

CALL 800-821-7563 TO ORDER YOURS TODAY


GR

AP

PLES

CARRIAGE-MOUNT GRAPPLESArrow Carriage-Mounted Grapples are great for handling long materials, such as pipe and lumber. Available in two configurations – grapple tip meets level of forks, or drops below level of forks (for clamping on smaller items). Both options open to 71 in. Highly customizable – can be easily adapted to custom carriages.

CustomizableCan be adapted to custom carriages.

Decisions, DecisionsAvailable in two configurations – grapple tip meets or drops below level of forks.

Long HaulingGreat for handling pipe, lumber, and other long materials.

Arrow’s Adapters will accommodate any Skid Steer attachment to work on most telehandlers, thereby increasing the versatility of your attachment investments. There are no standard part numbers – all adapters are custom-made based on telehandler make and model.

Add Value to Your Skid SteerArrow’s Adapter will allow you to adapt most skid steer attachments with a UQA coupler to work on a telehandler.

Custom ConfidenceAll adapters are custom-made based on telehandler make and model to ensure a perfect fit.

UNIVERSAL SKID STEER ADAPTERS


SIDE SHIFTERS

Side shifters provide additional maneuverability when positioning the loads in awkward spaces. Our ITA Side Shifter increases productivity while remaining efficient by reducing time and labor costs. By minimizing any loss at the load center due to the weight of the attachment, the forklift can maintain its available capacity while increasing operator efficiency. Many of the attachment’s most wear-prone components are replaceable which significantly increases the lifespan.

Expanding MovementSide shifters allow forklifts to position loads efficiently in tight and awkward spaces.

A More Efficient SolutionAn increase in mobility cuts costs through the reduction in labor time.

Keep On LiftingThe lightweight design minimizes any loss to the load capacity of the lift.

Easy to MaintainWorn and broken parts are quick and simple to replace.

PART # CLASS SIZE WEIGHT

SS - 37 - 2 II 37 in 130 lb

SS - 40 - 2 II 40 in 136 lb

SS - 43- 2 II 43 in 143 lb

SS - 40- 2 III 40 in 172 lb

SS - 43- 2 III 43 in 180 lb

SS - 49 - 2 III 49 in 196 lb

CUSTOM STYLES AVAILABLE


SPREADER BEAMS

FORK SPREADER SP

REA

DER

S

Arrow’s Forklift Spreader Beam is a quick and easy solution for safely lifting long or unbalanced loads. Our Spreader Beams are available in both fixed-length or adjustable styles, and offer multiple attachment styles. Made-to-order custom sizes are also available.

Arrow’s Fork Spreaders provide wide load capability to your existing fork device, and come in a variety of designs and custom sizes. Select from fixed and adjustable carriage mount types and full-length fork pockets or “stirrup” type entry points.

Quick and EasySlip forks into fork pockets and immediately get to work.

Never an Awkward MomentSpreader beams are an excellent solution for long and/or unbalanced loads.

Custom ConfidenceArrow’s on-site engineers and skilled production team can design and produce the ideal fork spreader for your business requirements.

Wide Loads, No ProblemFork Spreaders provide wide load capability to your existing fork device, adding value to your existing equipment investment.



TRAILER SPOTTERS

Trailer Spotters make it easy to tow or maneuver trailers and are available in multiple variations. Standard-Duty Trailer Spotters are great for general purpose towing and maneuvering. Heavy-Duty Trailer Spotters are great for larger trailers and are available in both standard and narrow widths for tighter turning. Spotters can also be outfitted with a swivel hook and clevis for use as a mini boom.

Shackles and eye hooks available, sold separately.

Towing Made Easy and SafeTow and maneuver trailers with just your forks. The Arrow Trailer Spotter is the ideal alternative to drilling holes in your forks, ensuring safe and OSHA-compliant towing.

Flexible VariationsMultiple variations are available for different load capacities and tighter spaces.

Make It a BoomOutfit select spotters with an optional swivel hook and clevis for use as a mini boom.

PART # DESCRIPTIONSPOTTER SIZE ACCEPTS FORK SIZE

WIDTH LENGTH WEIGHT WIDTH THICKNESS

1000151N Narrow Width 16.5 in 40 in 220 lb 6 in 2.25 in

1000293N Narrow 22.5 in 48 in 252 lb 9 in 3.25 in

1000762-SWVL Lifting Bar 28 in 36 in 150 lb 6 in 2.25 in

1000114 Standard Duty 22 in 44 in 90 lb 6 in 2.5 in

1000151 Wide Width 36 in 40 in 220 lb 6 in 2.25 in

1000293 Extended Reach 36 in 60 in 320 lb 9 in 3.25 in

1001417-SWVL Lifting Bar w/ Receiver

1000151-5WH RV 5th Wheel

1000293-5WH OTR 5th Wheel


TRA

SH

HO

PP

ERS

HEAVY-DUTY TRASH HOPPERSRemove trash and debris from jobsites quickly with the fork-mounted trash hopper. This heavy-duty hopper is made for continued use, unlike lightweight trash hoppers. Dumping is easy with a remote trip rope assembly triggered from inside the cab. Arrow Trash Hoppers keep your worksite clean and dry with a watertight design and ability to stack when not in use.

*Casters and lifting hooks available.

Fork-Mounted MobilitySimply slide onto existing forks, secure with chain, and move around jobsite.

Stay SeatedDump and reset without having to leave your seat using the remote trip rope assembly.

Out of the WayThe stackable design makes storage easy.

PART NUMBER

HEAPEDCAPACITY CAPACITY L W H MAX FORK

SIZE WEIGHT

HP-6000-100 1 cu yd 6,000 lb 62 in 41.5 in 37 in 2.375 x 10 in 610 lb

HP-6000-150 1.5 cu yd 6,000 lb 62 in 5.9 in 37 in 2. 375 x 12 in 785 lb

HP-6000-200 2 cu yd 6,000 lb 64 in 5.9 in 46 in 2. 375 x 12 in 880 lb

HP-6000-250 2.5 cu yd 6,000 lb 64 in 5.9 in 51 in 2. 375 x 12 in 905 lb

WATERTIGHT DESIGN


WO

RK

PLATFO

RM

S

WORK PLATFORMS

Arrow Fork-Mounted Work Platforms are a great alternative to stand-alone aerial man-lifts. High-quality build materials and an OSHA-compliant design ensure the platform’s safety. Additionally, fork mounts make it easy to lift in just minutes. Custom mounts are also available upon request.

Cost-Effective LiftSave money with this great alternative to stand-alone aerial man lifts.

OSHA-CompliantThe OSHA-compliant design and high-quality build materials give you peace of mind.

Ready for LiftoffLift in just minutes with the fork-mounted design.

OSHA-Compliant.1,000 lb capacity.Custom mounts available.Fork length must be 42 in to 48 in.Fork pockets accept forks up to 2.5 in thick and 6 in wide.

MODEL SIZE FORK SPREAD OCCUPANCY

WP48-48-FL 48 in to 48 in 36 in 2 people

WP48-72-FL 48 in x 72 in 48 in 4 people



Additional mast guard required for straight mast forklifts. Use Part# WP42-72MG for additional mast guard.



PARTS



LOAD BACKREST

Steel Load Backrests are designed to prevent your load from shifting backward when the carriage is lifted to full height. This allows loads to rest against a square, flat surface that makes transporting safer. Front Mount styles are built with a full-length, front-mount plate and side-mount styles are available for bolt-on or weld-on applications. There are no standard part numbers as all load backrests are engineered to order to ensure a perfect fit.

Customized FitAll load backrests are engineered-to-order, ensuring a perfect fit and easy installation.

OSHA-CompliantIf a load is not consistently one piece, shrink wrapped, banded, or crated, OSHA requires loads that exceed the top of the forks to include a load backrest.

CALL 800-821-7563 CUSTOM SIZE AVAILABLE


PARTS

SHAFT BARS

CARRIAGE BARS

Replace Steel Shaft Bars for a variety of applications including carriages on Telehandlers, Skid Steers and Forklifts. Optional welded collars offered. Stress Proof™ material available.

SHAFT BARS DIAMETERS LENGTH POSITIONED HOLES

Shaft Bar Range 1.5 to 4.0 in custom 0.625 in hole positioned 0.5 in from each shaft end

With Arrow Carriage Bars and a little welding, your downtime is kept to a minimum.

PART # Description Thickness Height Class

1000-_ _ Upper 1.25 in 5 II

1050-_ _ Lower 1.25 in 5 II

2000-_ _ Upper 1.25 in 6 II

2050-_ _ Lower 1.25 in 6 I

3000-_ _ Upper 1.50 in 7 III

3050-_ _ Lower 1.50 in 7 III

2790-_ _ Upper 1.63 in 5 II,III

2790-_ _ Lower 1.63 in 5 II,III

3500-_ _ Upper 2 in 6 III

3550-_ _ Lower 2 in 6 III

4000-_ _ Upper 2 in 7 IV

4050-_ _ Lower 2 in 7 IV

4200-_ _ Upper 2 in 6 IV

4250-_ _ Lower 2 in 6 IV

*custom drill holes available


Replacing a faulty or worn part means you don’t have to replace the more expensive attachments

PARTS

FORK EYES

Arrow Material Handling has a large selection at great prices to increase the length of use of your attachments and forks. We offer a wide variety of hitch assemblies, fork eyes, fork clips as well as shaft and carriage bars.

Prolong the life of your forks and attachmentsReplacing support parts when necessary extends the life of your forks and attachments.

Don’t let a small worn out part cause a big issueArrow has a variety of hitch assemblies, fork clips, fork eyes, carriage and shaft bars.

Custom ConfidenceArrow can custom-fit your machine and attachments to suit any capability.

FORK CLIPS

PIN KIT

PART # CLASS

4025M II

4035M III

4045M IV

5025M

PART # CLASS DESCRIPTION

1000M II Upper only

1002M III Upper only

1004M IV Upper only

4020M II Upper & lower

4030M III Upper & lower

4040M IV Upper & lower



REP

LAC

EMEN

T PARTS

SEATS AND SEAT BELTSPoorly designed seats are a major cause of operator fatigue and even injury. Replacing a worn-out seat with a new seat can be a great way to improve productivity and employee retention. Arrow seats are made from 10-gauge steel framing and heavy-duty vinyl fabric. Seats include seat-belt mountings and belts come complete with mounting hardware.

All IncludedAll seat belts come complete with mounting hardware.

Made to LastArrow seats are made from 10-gauge steel tube framing and heavy-duty vinyl fabric.

Inexpensive Productivity BoosterPoorly designed seats are a major cause of operator fatigue and even injury – new seats can actually improve productivity and employee retention!

The Boss Bucket Seat 18” Seat: Part # S999999*

The President Suspension Seat Vinyl Seat: Part # GS12 Seat Belt Part # SB1000

Retractable Seat Belt Part # SB1000R

The Chairman Forward tilt / Folding back Part# S999599

The Executive / Forward tilt Part # S999444


STO

RA

GE



FORK RACK

Keep your Arrow Forks organized and looking their best by raising them off the ground with the Arrow Fork Rack. The fork rack is easy to move due to its fork-mountable design and the included safety chains keep your forks in place. The fork rack is a great option for improving your retail display while improving storage and organization.

Looking GoodKeep forks organized and well-displayed for retail or storage.

Protect Your ForksPrevent damage to the paint by keeping forks off the ground and out of the elements.

Safe and SecureForks stay organized and in place with the included safety chains.

PART NUMBER WIDTH DEPTH FORKS WEIGHT EMPTY

1002046 72 in 42 in Up to 2.5 in thick 315 lb

EXCAVATOR BUCKET RACKKeep excavator buckets organized and off the ground with the Arrow Excavator Bucket Rack. The rack protects the buckets from scratches and scrapes and allows for drainage of snow and rain when stored outside. Use the rack as a retail display or a well-organized storage option.

Improved StorageExcavator Buckets are easier to find and look better when organized.

Protect Your BucketsKeep buckets from becoming scratched by raising them off the ground.

Better DrainageEliminate wear and corrosion caused by a buildup of rain, snow, and other elements.

PART NUMBER WIDTH DEPTH HEIGHT WEIGHT EMPTY

1002100 100 in 42 in 14 in 389 lb


STOR

AG

E

AUGER RACKKeep your Arrow Auger Bits looking their best with the Auger Bit Rack. Bits are securely fastened in an upright position, optimal for retail display. Auger Bit Racks are perfect for storage, too. Keep Auger Bits off the floor and off each other, remaining organized and easy to access.

Safely StoredAuger bits stay upright to avoid trip hazards and damage.

Easy To MoveFork-mount pockets make it easy to move while unloaded.

Mount with EaseVertical placement allows easy mount to drive.

PART NUMBER WIDTH DEPTH TALL WEIGHT EMPTY

1002089 144 in 48 in 40 in 520 lbs


ENGINEERED-TO-ORDER

Need something you don’t see? Or see something you need tweaked? Our engineering and manufacturing teams specialize in creating custom attachments for unique applications quickly and affordably.

THE PROCESS IS SIMPLE AND STRAIGHTFORWARD: » Discuss your product idea and/or business need with an Arrow Sales

representative. Our consultative approach will ensure the ideal solution to almost any material handling challenge.

» Arrow’s engineers will complete a design using Solid Works 3D CAD design software for review, collaborate with your team on design specifications until consensus is achieved, and you sign off on the final design.

» Arrow manufactures and ships your custom attachment directly out of our centrally located Lenexa, Kansas facility.

CALL TODAY at 800-821-7563 TO GET STARTED ON YOUR ENGINEERED-TO-ORDER PROJECT


LAN

D C

LEAR

ING


CUSTOMER SUPPORT

ARROW CONDUCTS REGULAR CUSTOMER SATISFACTION SURVEYS – HIGHLIGHTS INCLUDE:

» 94% of Customers would recommend Arrow to a friend or colleague

» 93% of Customers rate the quality of Arrow products as High or Very High Quality

» 95% of Customers are Very or Extremely likely to purchase an Arrow product again

» 87% of Customers say Arrow is Very or Extremely responsive to Questions or Concerns

THE BEST COMPLIMENTS COME DIRECTLY FROM OUR CUSTOMERS. IN THEIR OWN WORDS…

» “Awesome buying experience”

» “My Sales Rep is great, very knowledgeable, very professional, make ordering parts easy and can get them to me when I need them.”

» “It is a pleasure to do business with Arrow. My Rep knows the product very well and is always willing to help. Wish we all had more employees like her!”

Arrow Material Handling provides quality products and services designed to meet or exceed customer needs and expectations. Our experienced team focuses daily on supplying you the right product at the right time for the right price; i.e. the Lowest Cost of Ownership and the Highest Return on Investment.

Our CUSTOMER SERVICE TEAM is available for any questions or concerns at

913-495-4803 or [email protected]


All Arrow purchases are covered by our comprehensive warranty.

The complete warranty details can be found online at ArrowMHP.com/Warranty.

NEED HELP WITH A RETURN?

While returns are rare, they can and do happen. Contact Arrow Customer Service for complete information and instructions on handling returns at 913-495-4803 or [email protected]

WARRANTYFORK INCHES-TO-MILIMETERS CONVERSION TABLE

Visit ArrowMHP.com Today!

in (nom) mm (act)

0.75 20

1 25

1.25 32

1.375 35

1.575 40

1.75 45

2 50

2.25 60

2.375 60

2.5 65

2.75 70

3 75

3.25 85

3.5 90

3.75 95

4 100

4.25 110

4.5 115

4.75 120

5 125

5.25 135

5.5 140

5.75 145

6 150


in (nom) 8 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8

in (nom)

mm (act) 200 25 40 50 65 75 90 100 115 125 140 150 165 180 190 200

0.75 20 2,400 300 460 600 800 1,000 1,000 1,200 1,400 1,600 1,600 1,800 2,000 2,200 2,200 2,400

1.00 25 4,400 540 820 900 1,400 1,500 2,000 2,100 2,400 2,800 3,000 3,200 3,600 3,800 4,000 4,400

1.25 32 6,800 800 1,200 1,800 2,200 2,600 3,000 3,000 3,800 4,200 4,600 5,200 5,600 6,000 6,400 6,800

1.38 35 8,200 1,000 1,600 2,000 2,600 3,000 3,600 4,200 4,600 5,200 5,600 6,200 6,600 7,200 7,800 8,200

1.58 40 10,800 1,400 2,000 2,800 3,400 3,800 4,800 5,200 6,000 6,400 7,400 7,800 8,800 9,000 10,200 10,800

1.75 45 13,400 1,600 2,600 3,400 4,200 5,000 5,800 6,000 7,600 8,000 9,200 10,000 10,800 11,200 12,600 13,400

2.00 50 15,000 2,200 2,900 4,400 5,400 6,600 7,600 8,000 9,800 10,000 12,000 12,500 14,200 13,700 16,400 15,000

2.25 60 24,600 3,000 4,600 6,200 7,600 9,200 10,800 12,200 13,800 15,400 16,800 15,800 20,000 21,400 23,000 24,600

2.38 60 24,600 3,000 4,600 6,200 7,600 9,200 10,800 12,000 13,800 15,400 16,800 18,400 20,000 21,400 23,000 24,600

2.50 65 28,000 3,400 5,200 6,800 8,600 10,200 12,000 13,000 15,400 16,200 18,800 21,000 22,200 23,800 25,600 28,000

2.75 70 33,000 4,200 6,200 8,200 10,200 12,400 14,400 16,400 18,600 20,600 22,600 23,600 26,800 28,800 30,800 33,000

3.00 75 37,400 5,000 7,400 9,800 12,200 14,800 17,200 19,600 22,000 24,600 27,000 27,400 31,800 35,000 36,800 37,400

3.25 85 46,000 5,800 8,600 11,600 14,400 17,200 20,200 23,000 25,800 28,800 31,600 27,400 37,400 40,200 43,200 46,000

3.50 90 54,000 6,600 10,000 13,400 16,600 20,000 23,400 26,600 30,000 33,400 36,600 40,000 43,400 46,600 50,000 54,000

3.75 95 61,200 7,600 11,400 15,400 19,200 23,000 26,800 30,600 34,400 38,200 42,200 46,000 49,800 53,600 57,400 61,200

4.00 100 66,600 8,600 12,800 17,200 21,400 25,800 30,000 34,200 38,600 42,800 47,200 51,400 55,600 60,000 64,200 66,600

4.25 110 77,400 9,600 14,600 19,400 24,200 29,000 33,800 38,600 43,600 48,400 53,200 58,000 62,800 67,600 72,600 77,400

4.50 115 84,400 10,800 16,200 21,600 27,200 32,600 38,000 43,400 48,800 54,200 59,600 65,000 70,400 75,800 81,400 84,400

4.75 120 96,600 12,000 18,200 24,200 30,200 36,200 42,200 48,400 54,400 60,400 66,400 72,400 78,600 84,600 90,600 96,600

5.00 125 107,000 13,400 20,000 26,800 33,400 40,200 46,800 53,600 60,200 67,000 73,600 80,400 87,000 93,600 100,400 107,000

5.25 135 118,000 14,800 22,200 29,600 36,800 44,200 51,600 59,000 66,400 73,800 81,200 88,600 96,000 103,400 110,600 118,000

5.50 140 129,600 16,200 24,200 32,400 40,400 48,600 56,600 64,800 72,800 81,000 89,000 97,200 105,200 113,400 121,400 129,600

5.75 145 141,600 17,800 26,600 35,400 44,200 53,200 62,000 70,800 79,600 88,600 97,400 106,200 115,000 124,000 132,800 141,600

6.00 150 154,200 19,200 29,000 38,600 48,200 57,800 67,400 77,200 86,800 96,400 106,000 115,600 125,200 135,000 144,600 154,200

CAPACITY CHART


in (nom) 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 15.5 16

in (nom)

mm (act) 215 230 240 250 265 280 290 300 320 330 340 355 370 380 390 405

0.75 20 2,600 2,800 3,000 3,000 3,200 3,400 3,600 3,600 3,800 4,000 4,200 4,200 4,400 4,600 4,800 5,000

1.00 25 4,600 5,000 5,200 5,400 5,800 6,000 6,200 6,600 6,800 7,000 7,400 7,600 7,800 8,200 8,400 8,800

1.25 32 7,200 7,600 8,000 8,600 9,000 9,400 9,800 10,200 10,600 11,000 11,400 12,000 12,400 12,800 13,200 13,600

1.38 35 8,800 9,200 9,800 10,200 10,800 11,400 11,800 12,400 12,800 13,400 13,800 14,400 15,000 15,400 16,000 16,400

1.58 40 11,400 12,200 12,800 13,000 14,200 14,800 15,600 15,400 16,800 17,600 18,200 19,000 19,600 20,200 21,000 21,600

1.75 45 14,200 15,000 15,800 15,950 17,600 18,400 19,200 19,200 20,800 21,600 22,600 23,400 24,200 25,000 25,800 26,600

2.00 50 18,600 19,600 20,600 20,800 22,800 24,000 25,000 26,200 27,200 28,400 29,400 30,400 31,600 32,600 33,800 34,800

2.25 60 26,200 27,600 29,200 30,800 32,200 33,800 35,400 36,800 38,400 40,000 41,400 43,000 44,600 46,000 47,600 49,200

2.38 60 26,200 27,600 29,200 30,800 32,200 33,800 35,400 36,800 38,400 40,000 41,400 43,000 44,600 46,000 47,600 49,200

2.50 65 29,000 30,600 32,400 34,000 35,800 37,400 39,200 38,000 42,600 44,200 46,000 47,600 49,400 51,000 52,800 52,000

2.75 70 35,000 37,000 39,200 41,200 43,200 45,200 47,400 49,400 51,400 53,600 55,600 57,600 59,800 61,800 63,800 65,800

3.00 75 41,600 44,200 46,600 49,000 51,400 54,000 56,400 58,800 61,200 63,800 66,200 68,600 71,000 73,600 76,000 78,400

3.25 85 48,800 51,800 54,600 57,600 60,400 63,200 66,200 69,000 71,800 74,800 77,600 80,600 83,400 86,200 89,200 92,000

3.50 90 56,600 60,000 63,400 66,800 70,000 73,400 76,800 76,400 83,400 86,800 90,000 93,400 96,800 100,000 103,400 106,800

3.75 95 65,000 69,000 72,800 76,600 80,400 84,200 88,000 91,800 95,800 99,600 103,400 107,200 111,000 114,800 118,600 122,600

4.00 100 72,800 77,200 81,400 79,000 90,000 94,200 98,600 102,800 107,000 111,400 115,600 120,000 124,200 128,600 132,800 137,000

4.25 110 82,200 87,000 91,800 96,800 101,600 106,400 111,200 116,000 120,800 125,800 130,600 135,400 140,200 145,000 150,000 154,800

4.50 115 92,200 97,600 103,000 105,400 113,800 119,200 124,600 126,400 135,600 141,000 146,400 151,800 157,200 162,600 168,000 173,400

4.75 120 102,600 108,800 114,800 120,800 126,800 132,800 139,000 145,000 151,000 157,000 163,000 169,200 175,200 181,200 187,200 193,200

5.00 125 113,800 120,400 127,200 130,000 140,600 147,200 154,000 156,200 167,400 174,000 180,800 187,400 194,000 200,800 207,400 214,200

5.25 135 125,400 132,800 140,200 147,600 155,000 162,400 169,800 177,000 184,400 191,800 199,200 206,600 214,000 221,400 228,800 236,200

5.50 140 137,600 145,800 153,800 162,000 170,000 178,200 186,200 194,400 202,400 210,600 218,600 226,800 234,800 243,000 251,000 259,200

5.75 145 150,400 159,400 168,200 177,000 185,800 194,800 203,600 212,400 221,200 230,200 239,000 247,800 256,600 265,600 274,400 283,200

6.00 150 163,800 173,400 183,200 192,800 202,400 212,000 221,600 231,400 241,000 250,600 260,200 269,800 279,400 289,200 298,800 308,400

FOR SIZE AND CAPACITY ADVICE CALL OUR EXPERIENCED SALES TEAM AT 800-821-7563


NOTES:

AMHP-C-200508



16000 West 108th Street Lenexa, KS 66219800-821-7563 | Arrowmhp.com | [email protected]