+ All Categories

The top documents of fluxtrol-inc

Chapter 7: Fluxtrol Induction Heating Case Studies and Success Stories
Chapter 7: Fluxtrol Induction Heating Case Studies and Success Stories
7.598 views
Simulation of Induction System for Brazing of Squirrel Cage Rotor - HES 2013
Simulation of Induction System for Brazing of Squirrel Cage Rotor - HES 2013
1.256 views
Chapter 1B: Fluxtrol Basics of Induction Techniques Part 2
Chapter 1B: Fluxtrol Basics of Induction Techniques Part 2
7.685 views
Fluxtrol AlphaForm Moldable Magnetic Flux Concentrators
Fluxtrol AlphaForm Moldable Magnetic Flux Concentrators
2.110 views
MODELING AND OPTIMIZATION OF COLD CRUCIBLE FURNACES FOR MELTING METALS
MODELING AND OPTIMIZATION OF COLD CRUCIBLE FURNACES FOR MELTING METALS
3.469 views
Effect of Spray Quenching Rate on Distortion and Residual Stresses during Induction Hardening of a Full-Float Truck Axle
Effect of Spray Quenching Rate on Distortion and Residual Stresses during Induction Hardening of a Full-Float Truck Axle
1.976 views
Recent Design and Operational Developments of Cold Wall Induction Melting Crucibles for Reactive Metals Processing
Recent Design and Operational Developments of Cold Wall Induction Melting Crucibles for Reactive Metals Processing
4.723 views
Recognizing and Eliminating Flux Concentrator Failures
Recognizing and Eliminating Flux Concentrator Failures
1.637 views
Use of Frequency Control to Optimize Induction Axle Scan Hardening
Use of Frequency Control to Optimize Induction Axle Scan Hardening
7.904 views
ASM 2013 Fluxtrol Presentation - Innovations in Soft Magnetic Composites and their Applications in Induction Systems
ASM 2013 Fluxtrol Presentation - Innovations in Soft Magnetic Composites and their Applications in Induction Systems
3.322 views
Computer Simulation for Fundamental Study and Practical Solutions to Induction Heating Problems
Computer Simulation for Fundamental Study and Practical Solutions to Induction Heating Problems
3.121 views
Virtual Prototyping of Induction Heat Treating
Virtual Prototyping of Induction Heat Treating
11.823 views
Innovations in Soft Magnetic Composites and their Applications in Induction Systems
Innovations in Soft Magnetic Composites and their Applications in Induction Systems
1.493 views
Composite Materials for Magnetic Field Control in EPM
Composite Materials for Magnetic Field Control in EPM
8.501 views
The Machinability of Fluxtrol Induction Magnetic Flux Concentrators
The Machinability of Fluxtrol Induction Magnetic Flux Concentrators
1.108 views
ASM 2013 Fluxtrol Paper - Innovations in Soft Magnetic Composites and their Applications in Induction Systems
ASM 2013 Fluxtrol Paper - Innovations in Soft Magnetic Composites and their Applications in Induction Systems
1.182 views
Optimal Design of Internal Induction Coils
Optimal Design of Internal Induction Coils
8.792 views
Increasing Inductor Lifetime by Predicting Coil Copper Temperatures Paper
Increasing Inductor Lifetime by Predicting Coil Copper Temperatures Paper
236 views
ASM 2013 Fluxtrol Presentation - Enhancing Inductor Coil Reliability
ASM 2013 Fluxtrol Presentation - Enhancing Inductor Coil Reliability
3.019 views
Magnetic Flux Controllers in Induction Heating and Melting by Robert Goldstein of Fluxtrol Inc.
Magnetic Flux Controllers in Induction Heating and Melting by Robert Goldstein of Fluxtrol Inc.
270 views