Date post: | 25-Jun-2015 |
Category: |
Documents |
Upload: | fluxtrol-inc |
View: | 1,108 times |
Download: | 0 times |
Fluxtrol Machining
An Overview of the Machinability of Fluxtrol Induction Magnetic Flux Concentrators
Fluxtrol.com 1-248-393-2000
Machinable Induction Magnetic Flux Concentrators
Fluxtrol Offers Complete CNC Machining Capabilities
Fluxtrol.com 1-248-393-2000
Drilling Fluxtrol’s InductionMagnetic Flux Concentrators
All of the Fluxtrol soft magnetic concentrators or controllers can have holes drilled in them
Fluxtrol.com 1-248-393-2000
A wide variety of drilling characteristics and parameters can be used to effectively remove material
Turning of Fluxtrol Induction Magnetic Flux Concentrators
All of the Fluxtrol soft magnetic concentrators or controllers can be cut using a lathe or turning machine
Fluxtrol.com 1-248-393-2000
A wide variety of turning characteristics and parameters can be used to effectively remove material
Milling of Fluxtrol Induction Magnetic Flux ConcentratorsAll of the Fluxtrol soft magnetic concentrators or controllers can be cut using a milling machine.
Fluxtrol.com 1-248-393-2000
A wide variety of milling characteristics and parameters can be used to effectively remove material.
Sawing Fluxtrol Induction Magnetic Flux Concentrators
All of the Fluxtrol soft magnetic concentrators or controllers can be cut using a band saw.
Fluxtrol.com 1-248-393-2000
A wide variety of band saw characteristics and parameters can be used to effectively cut the material.
Machining Magneto-Dielectric Materials
Fluxtrol.com 1-248-393-2000
Completely machinable into virtually any shape!
Induction Coil Channel Concentrators
Fluxtrol induction channel concentrators come in virtually any shape or size.
Fluxtrol.com 1-248-393-2000
Direct Internal Water Cooling for Induction Magnetic Field Concentrators
When extra cooling is needed Fluxtrol concentrators can be tapped directly to achieve internal water cooling, although we recommend the installation of a threaded insert for improved strength.
Fluxtrol.com 1-248-393-2000
Fluxtrol.com 1-248-393-2000
Fluxtrol Induction Magnetic Flux Concentrator Material Can Be Threaded
Machining Induction Magnetic Field Concentrators
Fluxtrol can machine its magnetic flux
concentrators into nearly any shape you need
Fluxtrol.com 1-248-393-2000
Fluxtrol magnetic flux concentrators can be cut into virtually any shape.
Fluxtrol.com 1-248-393-2000
Fluxtrol Concentrators Can Be Cut Into Any Geometry
For help machining Fluxtrol induction heating concentrators
just contact us at:
Fluxtrol.com
1-248-393-2000
Fluxtrol.com 1-248-393-2000
Machining Induction ConcentratorsFluxtrol’s CNC Machining Centers can cut any geometry to your requirements
Fluxtrol.com 1-248-393-2000
Induction Concentrator Thin Side Shields
Fluxtrol can produce magnetic shields as thin as 1.3 mm.
Fluxtrol.com 1-248-393-2000
Intricate Milling of Induction Concentrator
Fluxtrol’s CNC Machining Centers can cut delicate and unusual geometries
Fluxtrol.com 1-248-393-2000