10 - Architetto DI LEO LEONARDO FERRO BATTUTO...A ruego, en las mismas medidas de los aros del...

transcript

ringsleaveshandles

Stamped leaves

Hot forged leaves

Cast iron leaves

Rosettes and leaves

Gates ornaments

Iron handles and knockers

Gates supports and hinges

Forged aluminium articles

Gates wheels and hinges

cerchifogliemaniglie

Cerchi

Foglie stampate

Foglie stampate a caldo

Foglie in ferro fuso

Rosette e foglie

Ornamenti per cancelli

Maniglie e battenti in ferro

Supporti e cardini per cancelli

Articoli in alluminio fucinato

Ruote e cardini per cancelli

i diri

tti ri

CALANDRATURA - Roller level ing (calandering)Kalandern - Calandrado - Calandrage

É un tipo di piegatura del ferro che tramite apposite macchine serve a conferire al pezzo forme ad arco ocurvilinee.

It is a special method for bending the iron by means of apposite machines for getting arc and curvilinearshapes.

Es ist ein Vorgang mit dem das Eisen, mit entsprechenden Maschinen, in Bogen- oder Kurvernform gebo-gen wird.

Es un tipo de doblado del hierro que por medio de máquinas apropriadas sirve para conferir a la pieza for-mas de arcos o curvilineas.

Il s’agit d’un type de pliage du fer qui, au moyen de machines appropriées, done à la pièce des formes d’arcou curviligne.

Esecuzione foglie con maglio(art. 10.605)Leaves manufacturing by means of power hammer (art. 10.605)

Esecuzione cerchio in automaticoAutomatic rings manufacturing

Rifinitura ornamenti per cancelliGates ornaments finishing

cerchi - fogliemaniglie rings - leaves - handles

i diri

tti ri

10.1CERCHI in piatto E RIGATIFlat and ruled r ings

i diri

tti ri

MartellatoHammered

Rifinito a caldoHot finished

Particolare finituraFinish detail

Forgiato a manoHand forged

■ 16 x 4 5/8”x 1/8”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10050-0901005010050-1101005110052100531005410050-250

■ 20 x 4 3/4”x 1/8”

10055-0901005510055-1101005610057100581005910055-250

■ 20 x 6 3/4”x 1/4”

10060-0901006010060-1101006110062100631006410060-250

■ 12 x 6 1/2”x 1/4”

10065-0901006510065-1101006610067100681006910065-250

■ 14 x 5 9/16”x 3/16”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10301-090103011030210303103041030510301-19010301-250

■ 16 x 6 5/8”x 1/4”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10310-0901031010310-11010311103121031310310-19010310-250

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

■ 14 x 6 9/16”x 1/4”

10306-09010306-10010306-11010306-12010306-13010306-16010306-19010306-250

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

■ 16 x 8 5/8”x 5/16”

10315-09010315-10010315-11010315-12010315-13010315-16010315-19010315-250

■ 12 x 6 1/2”x 1/4”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10065-090R10065-100R10065-110R10065-120R10065-130R10065-160R10065-190R10065-250R

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

■ 14 x 6 9/16”x 1/4”

10306-090R10306-100R10306-110R10306-120R10306-130R10306-160R10306-190R10306-250R

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

■ 16 x 4 5/8”x 1/8”

10050-090R10050-100R10050-110R10050-120R10050-130R10050-160R10050-190R10050-250R

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

■ 16 x 6 5/8”x 1/4”

10310-090R10310-100R10310-110R10310-120R10310-130R10310-160R10310-190R10310-250R

■ 20 x 4 3/4”x 1/8”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10055-090R10055-100R10055-110R10055-120R10055-130R10055-160R10055-190R10055-250R

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

■ 20 x 6 3/4”x 1/4”

10060-090R10060-100R10060-110R10060-120R10060-130R10060-160R10060-190R10060-250R

■ 8 5/16”

10340-090R10340-100R10340-110R10340-120R10340-130R10340-160R10340-190R10340-250R

■ 10 3/8”

10350-090R10350-100R10350-110R10350-120R10350-130R10350-160R10350-190R10350-250R

Su richiesta, nelle misure dei cerchi si forniscono anche semi-cerchi. Il codice di ogni articolo ha estensione “S”.La misura del diametro dei cerchi è esterna.

By request, we can supply half-rings in the same sizes of ourcatalogue’s rings. The diameter of rings is outside.

In den selben Abmessungen der Ringe im Katalog könnenwir, auf Wunsch, auch Halbringe liefern.Der Durchmesser den Ringen ist extern.

A ruego, en las mismas medidas de los aros del catalogo,hacemos semi-aros. El diametro de los circulos es exterior.

Nous pouvons fournir, sur demande, des demi-cercles avecles mêmes mesures des cercles du catalogue. Le diamètre descercles est extérieur.

10.1CERCHI in quadro e battuti Square and hammered r ings

Ferro pieno piattoFlat iron

■Ferro pieno quadroSquare iron

Ferro pieno tondoRound iron

i diri

tti ri

■ 8 5/16”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10340-0901034010340-1101034110340-1301034310340-19010340-250

■ 10 3/8”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10350-0901035010350-11010351103521035410350-19010350-250

■ 12 1/2”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10355-0901035510355-11010356103571035810355-19010355-250

■ 14 9/16”

Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 140 5-1/2”Ø 160 6-1/4”Ø 190 7-1/2”

1036010360-1101036110362103631036510366

■ 16 5/8”

Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 140 5-1/2”Ø 160 6-1/4”Ø 190 7-1/2”

10368-10010368-11010368-12010368-13010368-14010368-16010368-190

■ 14 x 5 9/16”x 3/16”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10301-090B10301-100B10301-110B10301-120B10301-130B10301-160B10301-190B10301-250B

■ 14 9/16”

Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 140 5-1/2”Ø 160 6-1/4”Ø 190 7-1/2”

10360-100B10360-110B10360-120B10360-130B10360-140B10360-160B10360-190B

■ 16 x 8 5/8”x 5/16”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10315-090B10315-100B10315-110B10315-120B10315-130B10315-160B10315-190B10315-250B

■ 12 1/2”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10355-090B10355-100B10355-110B10355-120B10355-130B10355-160B10355-190B10355-250B

■ 16 5/8”

Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 140 5-1/2”Ø 160 6-1/4”Ø 190 7-1/2”

10368-100B10368-110B10368-120B10368-130B10368-140B10368-160B10368-190B

10.1CERCHI in quadro e battuti Square and hammered r ings

i diri

tti ri

MartellatoHammered

● 8 5/16”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10379-09010379-10010379-11010379-12010379-13010379-16010379-19010379-250

● 10 3/8”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10380-0901038010380-1101038110382103831038410380-250

● 12 1/2”

Ø 90 3-1/2”Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 160 6-1/4”Ø 190 7-1/2”Ø 250 9-7/8”

10385-0901038510385-1101038610387103881038910385-250

● 14 9/16”

Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 140 5-1/2”Ø 160 6-1/4”Ø 190 7-1/2”

1039010390-110103911039210390-1401039310394

● 16 5/8”

Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 140 5-1/2”Ø 160 6-1/4”Ø 190 7-1/2”

10395-10010395-11010395-12010395-13010395-14010395-16010395-190

● 12 1/2”

Ø 90 - ”Ø 100 - ”Ø 110 - ”Ø 120 - ”Ø 130 - ”Ø 160 - ”Ø 190 - ”Ø 250 - ”

10385-090B10385-100B10385-110B10385-120B10385-130B10385-160B10385-190B10385-250B

● 14 9/16”

Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 140 5-1/2”Ø 160 6-1/4”Ø 190 7-1/2”

10390-100B10390-110B10390-120B10390-130B10390-140B10390-160B10390-190B

● 16 5/8”

Ø 100 4”Ø 110 4-3/8”Ø 120 4-3/4”Ø 130 5”Ø 140 5-1/2”Ø 160 6-1/4”Ø 190 7-1/2”

10395-100B10395-110B10395-120B10395-130B10395-140B10395-160B10395-190B

10.2OVALIOvals

i diri

tti ri

■ 12 x 6 1/2”x 1/4”

100 x 190 h 4”x 7-1/2” h110 x 190 h 4-3/8”x 7-1/2” h120 x 190 h 4-3/4”x 7-1/2” h

10290-06310291-06310292-063

■ 14 x 5 9/16”x 3/16”

10290-06410291-06410292-064

100 x 190 h 4”x 7-1/2” h110 x 190 h 4-3/8”x 7-1/2” h120 x 190 h 4-3/4”x 7-1/2” h

■ 16 x 6 5/8”x 1/4”

10290-06910291-06910292-069

■ 12 x 6 1/2”x 1/4”

100 x 190 h 4”x 7-1/2” h110 x 190 h 4-3/8”x 7-1/2” h120 x 190 h 4-3/4”x 7-1/2” h

10290-063B10291-063B10292-063B

■ 14 x 5 9/16”x 3/16”

10290-064B10291-064B10292-064B

100 x 190 h 4”x 7-1/2” h110 x 190 h 4-3/8”x 7-1/2” h120 x 190 h 4-3/4”x 7-1/2” h

■ 16 x 6 5/8”x 1/4”

10290-069B10291-069B10292-069B

10.3FOGLIE stampateStamped leaves

i diri

tti ri

MartellatoHammered

mm 86 x 98 h 3-3/8”x 3-7/8” h

sp 3 th 1/8” th 1/8” th 1/8” th 1/8”9650

mm 86 x 98 h 3-3/8”x 3-7/8” h

sp 39651

mm 70 x 103 h 2-3/4”x 4” h

sp 39655

mm 70 x 103 h 2-3/4”x 4” h

sp 39656

mm 58 x 75 h 2-1/4”x 3” h

sp 3 th 1/8” th 1/8” th 1/8” th 1/8”9660

mm 58 x 75 h 2-1/4”x 3” h

sp 39661

mm 100 x 95 h 4”x 3-3/4” h

sp 310042

mm 100 x 95 h 4”x 3-3/4” h

sp 310043

mm 70 x 60 h 2-3/4”x 2-3/8” h

sp 3 th 1/8” th 1/8” th 1/8” th 1/8”10044

mm 70 x 60 h 2-3/4”x 2-3/8” h

sp 310047

mm 40 x 110 h 1-5/8”x 4-3/8” h

sp 310048

mm 40 x 110 h 1-5/8”x 4-3/8” h

sp 310049

i diri

tti ri

mm 30 x 90 h 1-3/16”x 3-1/2” h

sp 2 th 1/16” th 1/16” th 1/8” th 1/8”10048-1dx

mm 30 x 90 h 1-3/16”x 3-1/2” h

sp 210048-1sx

mm 55 x 160 h 2-3/16”x 6-1/4” h

sp 310048-3dx

mm 55 x 160 h 2-3/16”x 6-1/4” h

sp 310048-3sx

mm 65 x 180 h 2-9/16”x 7” h

sp 3 th 1/8” th 1/8” th 1/8” th 1/8”10048-4dx

mm 65 x 180 h 2-9/16”x 7” h

sp 310048-4sx

mm 50 x 90 h 2”x 3-1/2” h

sp 410465 01

mm 50 x 90 h 2”x 3-1/2” h

sp 410465 02

mm 30 x 85 h 1-3/16”x 3-3/8” h

sp 0,5 th ” th ” th 1/8” th 1/8”10465-1sx

mm 30 x 85 h 1-3/16”x 3-3/8” h

sp 0,510465-1dx

mm 60 x 120 h 2-3/8”x 4-3/4” h

sp 410468-1sx

mm 60 x 120 h 2-3/8”x 4-3/4” h

sp 410468-1dx

i diri

tti ri

MartellatoHammered

mm 130 x 140 h 5-1/8”x 5-1/2” h

sp 5 th 3/16” th 3/16” th 1/8” th 1/8”10470 01

mm 130 x 140 h 5-1/8”x 5-1/2” h

sp 510470 02

mm 100 x 80 h 4”x 3-1/8” h

sp 410471-1sx

mm 100 x 80 h 4”x 3-1/8” h

sp 410471-1dx

mm 100 x 110 h 4”x 4-3/8” h

sp 4 th 1/8” th 1/8” th 1/8” th 1/8”10471-2sx

mm 100 x 110 h 4”x 4-3/8” h

sp 410471-2dx

mm 130 x 120 h 5-1/8”x 4-3/4” h

sp 410471-3sx

mm 130 x 120 h 5-1/8”x 4-3/4” h

sp 410471-3dx

mm 170 x 200 h 6-3/4”x 8” h

sp 4 th 1/8”10472-1dx

mm 170 x 200 h 6-3/4”x 8” h

sp 4 th 1/8”10472-1sx

i diri

tti ri

mm 160 x 135 h 6-1/4”x 5-3/8” h

sp 4 th 1/8”10474-1dx

mm 160 x 135 h 6-1/4”x 5-3/8” h

sp 4 th 1/8”10474-1sx

mm 150 x 390 h 5-7/8”x 15-3/8” h

sp 4 th 1/8”9652

mm 75 x 240 h 3”x 9-1/2” h

sp 4 th 1/8”9653

mm 80 x 100 h 3-1/8”x 4” h

sp 4 th 1/8”10480

mm 95 x 160 h 3-3/4”x 6-1/4” h

sp 4 th 1/8”10485

mm 54 x 95 h 2-1/8”x 3-3/4” h

sp 4 th 1/8”9654

i diri

tti ri

MartellatoHammered

mm 140 x 230 h 5-1/2”x 9” h

sp 4 th 1/8”9658

mm 140 x 230 h 5-1/2”x 9” h

sp 4 th 1/8”9659

mm 82 x 137 h 3-1/4”x 5-3/8” h

sp 4 th 1/8”10479

mm 70 x 220 h 2-3/4”x 8-5/8” h

sp 4 th 1/8”9657

3/4”mm 40

1-5/8”

10.4FOGLIE stampate a caldoHot forged leaves

i diri

tti ri

mm 60 x 160 h 2-3/8”x 6-1/4” h

sp 3 th 1/8”10508

mm 45 x 190 h 1-3/4”x 7-1/2” h

sp 4 th 1/8”10522

mm 60 x 220 h 2-3/8”x 8-5/8” h

sp 4 th 1/8”10524

mm Ø 14 x 175 h Ø 9/16”x 6-7/8” h

mm 95 x 180 h 3-3/4”x 7” h

● 8 5/16”10501

mm 100 x 210 h 4”x 8-1/4” h

sp 5 th 3/16”10505

i diri

tti ri

MartellatoHammered

mm 110 x 370 h 4-3/8”x 14-1/2” h

sp 4 th 1/8”10529

mm 140 x 200 h 5-1/2”x 8” h

sp 6 th 1/4”10552

mm 140 x 200 h 5-1/2”x 8” h

sp 6 th 1/4”10553

mm 100 x 380 h 4”x 15” h

sp 4 th 1/8”10527

mm 210 x 135 h 8-1/4”x 5-3/8” h

sp 6 th 1/4”10550

mm 210 x 135 h 8-1/4”x 5-3/8” h

sp 6 th 1/4”10551

i diri

tti ri

mm 185 x 415 h 7-1/4”x 16-3/8” h

sp 6 th 1/4”10560

mm 185 x 415 h 7-1/4”x 16-3/8” h

sp 6 th 1/4”10561

mm 140 x 215 h 5-1/2”x 8-1/2” h

sp 6 th 1/4”10554

mm 140 x 215 h 5-1/2”x 8-1/2” h

sp 6 th 1/4”10556

i diri

tti ri

MartellatoHammered

mm 260 x 310 h 10-1/4”x 12-1/4” h

sp 6 th 1/4”10565

mm 400 h 15-3/4” h

■ 14 9/16”10620

mm 400 h 15-3/4” h

■ 14 9/16”10625

mm 150 h 6” h

■ 14 - sp 4 9/16” - th 1/8”10605

mm 200 h 8” h

● 10 - sp 4 3/8” - th 1/8”10610

i diri

tti ri

mm 125 x 170 h 4-7/8”x 6-3/4” h

sp 3 th 1/8”10578-300

mm 80 x 140 h 3-1/8”x 5-1/2” h

sp 3 th 1/8”10578-100

mm 80 x 170 h 3-1/8”x 6-3/4” h

mm 120 x 200 h 4-3/4”x 8” h

mm 70 x 130 h 2-3/4”x 5-1/8” h

mm 80 x 160 h 3-1/8”x 6-1/4” h

mm 65 x 170 h 2-9/16”x 6-3/4” h

mm 70 x 190 h 2-3/4”x 7-1/2” h

mm 70 x 78 h 2-3/4”x 3-1/16” h

sp 3 th 1/8”10575

mm 108 x 120 h 4-1/4”x 4-3/4” h

sp 3 th 1/8”10576

mm 145 x 160 h 5-3/4”x 6-1/4” h

sp 3 th 1/8”10577

10.5FOGLIE in ferro fusoCast steel leaves

i diri

tti ri

MartellatoHammered

mm 90 x 60 h 3-1/2”x 2-3/8” h

sp 4 th 1/8”10568

mm 84 x 181 h 3-5/16”x 7-1/8” h

sp 4 th 1/8”10570-sx

mm 84 x 181 h 3-5/16”x 7-1/8” h

sp 4 th 1/8”10570-dx

mm 120 x 163 h 4-5/8”x 6-3/8” h

sp 4 th 1/8”10571-sx

mm 120 x 163 h 4-5/8”x 6-3/8” h

sp 4 th 1/8”10571-dx

mm 160 x 160 h 6-1/4”x 6-1/4” h

sp 4 th 1/8”10567

i diri

tti ri

mm 104 x 234 h 4”x 9-1/4” h

sp 4 th 1/8”10569

mm 130 x 230 h 5”x 9” h

sp 4 th 1/8”10572-sx

mm 130 x 230 h 5”x 9” h

sp 4 th 1/8”10572-dx

mm 100 x 220 h 4”x 8-5/8” h

sp 4 th 1/8”10573-dx

mm 100 x 220 h 4”x 8-5/8” h

sp 4 th 1/8”10573-sx

i diri

tti ri

MartellatoHammered

mm 156 x 245 h 6-1/8”x 9-5/8” h

sp 4 th 1/8”10574-sx

mm 156 x 245 h 6-1/8”x 9-5/8” h

sp 4 th 1/8”10574-dx

10.6ROSETTE e FOGLIERosettes and leaves

i diri

tti ri

sp 0,5 th 0,02”

70 x 75 h 2-3/4”x 3” h10070

sp 0,5 th 0,02”

95 x 105 h 3-3/4”x 4-1/8” h10071

sp 0,5 th 0,02”

190 x 195 h 7-1/2”x 7-5/8” h10072

sp 0,5 th 0,02”

40 x 170 h 1-5/8”x 6-3/4” h10073

sp 0,5 th 0,02”

27 x 60 h 1-1/16”x 2-3/8” h10075

sp 0,5 th 0,02”

35 x 70 h 1-3/8”x 2-3/4” h10076

sp 0,5 th 0,02”

47 x 90 h 1-7/8”x 3-9/16” h10077

sp 0,5 th 0,02”

40 x 120 h 1-5/8”x 4-3/4” h10074

sp 0,5 th 0,02”

28 x 59 h1”x 2-3/16” h

10078-001

sp 0,5 th 0,02”

24 x 44 h7/8”x 1-5/8” h

10078-101

sp 0,5 th 0,02”

35 x 65 h1-3/8”x 2-9/16” h

10078-102

sp 0,5 th 0,02”

34 x 60 h1-3/16”x 2-3/8” h

10078-201

10.6ROSETTE e FOGLIERosettes and leaves

i diri

tti ri

MartellatoHammered

sp 0,5 th 0,02”

26 x 44 h1”x 1-5/8” h

10078-301

sp 0,5 th 0,02”

34 x 59 h1-3/16”x 2-3/16” h

10078-302

sp 0,5 th 0,02”

37 x 80 h1-3/8”x 3-1/8” h

10078-401

sp 0,5 th 0,02”

88 x 97 h3-3/8”x 3-3/4” h

10079-401

sp 0,5 th 0,02”

55 x 57 h2-3/16”x 2-3/16” h

10079-001

sp 0,5 th 0,02”

72 x 72 h2-3/4”x 2-3/4” h

10079-002

sp 0,5 th 0,02”

74 x 76 h2-3/4”x 3” h

10079-201

sp 0,5 th 0,02”

94 x 97 h3-1/2”x 3-3/4” h

10079-202

sp 0,5 th 0,02”

59 x 48 h2-3/16”x 3-3/4” h

10079-301

sp 0,5 th 0,02”

104 x 86 h3-7/8”x 3-3/8” h

10079-302

sp 0,5 th 0,02”

80 x 190 h 3-1/8”x 7-1/2” h10082

sp 0,5 th 0,02”

20 x 118 h3/4”x 4-1/2” h28 x 163 h1”x 6-1/4” h

10083-001

10083-002

10.6ROSETTE e FOGLIE Rosettes and leaves

i diri

tti ri

sp 0,5 th 0,02”

18 x 67 h22 x 75 h

11/16”x 2-9/16”7/8”x 3” h

10083-30210083-303

sp 0,5 th 0,02”

78 x 22 h3”x 7/8” h

10084-001

sp 0,5 th 0,02”

90 x 40 h3-1/2”x 1-5/8” h

10084-002

sp 0,5 th 0,02”

120 x 100 h4-3/4”x 4” h

10084-201

sp 0,5 th 0,02”

30 x 62 h1-3/16”x 2-3/8” h

10083-501

sp 0,5 th 0,02”

32 x 87 h1-3/16”x 3-3/8” h

10083-502

sp 0,5 th 0,02”

20 x 72 h3/4”x 2-3/4” h

10083-601

sp 0,5 th 0,02”

26 x 89 h1”x 3-3/8” h

10083-602

sp 0,5 th 0,02”

Ø 60 hØ2-3/8” h

10084-301

sp 0,5 th 0,02”

50 x 95 h65 x 130 h

2”x 3-3/4” h2-9/16”x 5-1/8” h

1008010081

sp 0,5 th 0,02”

Ø 40 x 40 h 1-5/8”x 1-5/8” h10085

sp 0,5 th 0,02”

Ø 55 x 35 h 2-3/16”x 1-3/8” h10086

10.6ROSETTE E FOGLIE Rosettes and leaves

i diri

tti ri

MartellatoHammered

sp 16 th 5/8”

Ø 125 Ø 4-7/8”10091

sp 14 th 9/19”

Ø 90 Ø 3-1/2”10092

sp 8 th 5/16”

Ø 55 Ø 2-3/16”10093

sp 2 th 1/16”

Ø 60 Ø 2-3/8”10095

sp 0,5 th 0,02”

Ø 65 x 30 h 2-9/16”x 1-3/16” h10087

sp 0,5 th 0,02”

Ø 90 x 70 h 3-1/2”x 2-3/4” h10088

sp 2 th 1/16”

Ø 80 x 50 h 3-1/8”x 2” h10089

sp 2 th 1/16”

Ø 60 2-3/8” h10090

sp 2 th 1/16”

Ø 60 Ø 2-3/8”10094-060

sp 2 th 1/16”

Ø 70 Ø 2-3/4”10094-070

sp 2 th 1/16”

Ø 85 Ø 3-3/8”10094-085

sp 2 th 1/16”

Ø 80 Ø 3-1/8”10097

i diri

tti ri

sp 8 th 5/16”

Ø 90 Ø 3-1/2”10098

sp 8 th 5/16”

Ø 55 Ø 2-3/16”10099

sp 2 th 1/16”

60 x 105 h 2-3/8”x 4-1/8” h 10102

sp 2 th 1/16”

125 x 175 h4-7/8”x 6-7/8”h

10102-002

sp 2 th 1/16”

Ø 50 Ø 2”10103

sp 4 th 1/8”

Ø 90 Ø 3-1/2”10109

sp 2 th 1/16”

Ø 90 Ø 3-1/2”10105

sp 2 th 1/16”

Ø 130 Ø 5-1/8”10104

sp 2 th 1/16”

Ø 50❍ 4

Ø 2”

❍ 1/8”

10101-050

sp 2 th 1/16”

Ø 65❍ 8,5

Ø 2-9/16”

❍ 3/8”

10101-065

sp 2 th 1/16”

Ø 85❍ 10,5

Ø 3-3/8”

❍ 7/16”

10101-085

sp 2 th 1/16”

Ø 60 Ø 2-3/8”10100

i diri

tti ri

MartellatoHammered

sp 4 th 1/8”

Ø 120 Ø 4-3/4”10106

sp 4 th 1/8”

Ø 135 Ø 5-3/8”10107

sp 3 th 1/8”

Ø 85 Ø 3-5/8”10108 Ø 88 x 17 h Ø 3-1/2”x 11/16”h 10110

sp 3 th 1/8”

Ø 95 Ø 3-3/4”10111

sp 3 th 1/8”

Ø 65 Ø 2-9/16”10112

sp 2 th 1/16”

Ø 50 Ø 2”10113

sp 3 th 1/8”

Ø 65 Ø 2-9/16”10114

sp 0,5 th 0,02”

Ø 90 x 15 h Ø 3-1/2”x 5/8” h10115

sp 0,5 th 0,02”

Ø 55 x 10 h Ø 2-3/16x 3/8” h 10116

sp 1 th 0,04”

80 x 158 h 3-1/8”x 6-1/4” h10118

sp 0,5 th 0,02”

30 x 40 h 1-3/16”x 1-5/8” h10119

i diri

tti ri

sp 5 th 3/8”

Ø 60 Ø 2-3/8”10255

sp 5 th 3/8”

Ø 95 Ø 3-3/4”10256

sp 5 th 3/8”

Ø 95 Ø 3-3/4”10257

sp 3 th 1/8”

Ø 90 Ø 3-1/2”10250

sp 0,5 th 0,02”

Ø 65 x 20 hØ 2-9/16”x 3/4” h

10272-002

sp 0,5 th 0,02”

Ø 50 x 36 hØ 2”x 1-3/8” h

10275-001

sp 0,5 th 0,02”

Ø 56 x 33 hØ 2-3/16”x 1-3/16” h

10275-002

sp 0,5 th 0,02”

Ø 95 x 62 hØ 3-3/4”x 2-3/8” h

10278-001

Ø 95 Ø 3-3/4”10252 Ø 120 Ø 4-3/4”10252-005

sp 0,5 th 0,02”

Ø 85 Ø 3-3/8”10270-001

sp 0,5 th 0,02”

Ø 48 x 18 hØ 1-3/4”x 11/16” h

10272-001

10.6FIORI forgiati Forged flowers

i diri

tti ri

MartellatoHammered

Ø 55 x 47 h 2-3/16”x 1-7/8” h10164 Ø 55 x 47 h 2-3/16”x 1-7/8” h10165 Ø 32 x 45 h 1-1/4”x 1-3/4” h 10166 30 x 45 h 1-3/16”x 1-3/4” h 10169

● 6 1/4”

55 x 300 h 2-3/16”x 12”h 10160

● 6 1/4”

120 x 300 h 4-3/4”x 12” h10161

● 6 1/4”

32 x 300 h 1-1/4”x 12” h10163

● 6 1/4”

140 x 300 h 5-1/2”x 12” h10162

i diri

tti ri

● 8 5/16”

80 x 300 h 3-1/8”x 12” h 10175

● 6 1/4”

120 x 220 h 4-3/4”x 8-5/8” h 10168

● 6 1/4”

30 x 230 h 1-3/16”x 9” h 10167

● 8 5/16”

20 x 300 h 3/4”x 12” h 10176

i diri

tti ri

MartellatoHammered

● 8 5/16”

90 x 300 h 3-1/2”x 12” h 10178

● 8 5/16”

80 x 300 h 3-1/8”x 12” h 10179

● 8 5/16”

60 x 300 h 2-3/8”x 12” h 10180

● 8 5/16”

40 x 300 h 1-5/8”x 12” h 10181

10.7ORNAMENTI per cancelliGates ornaments

i diri

tti ri

mm 100 x 100 h 4”x 4” h

sp 1 th 0,04”10650

mm 55 x 90 h 2-3/16”x 3-1/2” h

sp 0,8 th 0,03”10651

mm 85 x 135 h 3-3/8”x 5-3/8” h

sp 1,5 th 1/16”10652

mm 140 x 200 h 5-1/2”x 8” h

sp 1,5 th 1/6”10653

mm 80 x 160 h 3-1/8”x 6-1/4” h

sp 0,8 th 0,03”10654-001

mm 73 x 150 h 2-7/8”x 6” h

sp 3 th 1/8”10654-002

i diri

tti ri

MartellatoHammered

mm 150 x 270 h 6”x 10-5/8” h

sp 0,8 th 0,03”10658

mm 130 x 335 h 5-1/8”x 13-1/4” h

sp 0,8 th 0,03”10659

mm 140 x 190 h 5-1/2”x 7-1/12” h

sp 0,8 th 0,03”10655

mm 95 x 205 h 3-3/4”x 8” h

sp 0,8 th 0,03”10656

mm 100 x 230 h 4”x 9” h

sp 0,8 th 0,03”10657

i diri

tti ri

mm 90 x 320 h 3-1/2”x 12-5/8” h

sp 8 th 5/16”10720

mm 130 x 350 h 5-1/8”x 13-3/4” h

sp 8 th 5/16”10722

mm 100 x 185 h 4”x 7-1/4” h

sp 12 th 1/2”10701

mm 250 x 100 h 10”x 4” h

sp 12 th 1/2”10705

mm Ø 90 Ø 3-1/2”

sp 8 th 5/16”10730

ORNAMENTI IN GHISACAST IRON ORNAMENTS

10.8MANIGLIE e BATTENTI in ferroIron handles and knockers

i diri

tti ri

MartellatoHammered

mm Ø 60 Ø 2-3/8”

mm Ø 66 Ø 2-5/8”

10135-018

mm Ø 65 Ø 2-9/16”

mm 135 5-3/8”

mm 56 x 250 h 2-1/4”x 10”

10135-001

mm 56 x 250 h 2-1/4”x 10”

10135-005

mm 602-3/8”

mm 135 5-3/8”

i diri

tti ri

mm Ø 66 Ø 2-5/8”

72 h 2-7/8” h10125

mm Ø 50 Ø 2”

10125-016

mm Ø 50 Ø 2”

10125-018

mm Ø 50 Ø 2”

10125-019

mm 38 x 252 h Ø 1-1/2”x 10”

10125-001

2-9/16”

mm 142 5-5/8”

8”mm 142 Ø 5-5/8”

10125-003

i diri

tti ri

MartellatoHammered

mm 38 x 252 h 1-1/2”x 9-7/8” h

10134-001

mm 38 x 252 h 1-1/2”x 9-7/8” h

10134-005

mm 160 6-1/4”

mm Ø 50 Ø 2

10125-016 10125-018 10125-019

i diri

tti ri

mm 110 4-3/8”

mm Ø 50 Ø 2”

10125-016 10125-018 10125-019

mm 38 x 252 h 1-1/2”x 8” h

10136-001

mm 38 x 252 h 1-1/2”x 8” h

10136-005

mm 110 4-3/8”

i diri

tti ri

MartellatoHammered

mm 36 x 185 h 1-7/16”x 7-1/4”h

10136-010

mm 34 x 140 h 1-3/8”x 5-1/8”

10136-011

mm 40 x 160 h 1-5/8”x 6-1/4” h

10147 01

mm 34 x 140 h 1-3/8”x 5-1/8”

10147 02

mm 40 x 160 h 1-5/8”x 6-1/4” h

10135-010

mm 40 x 160 h 1-5/8”x 6-1/4” h

10135-011

i diri

tti ri

mm 50 x 280 h 2”x 11” h

mm 90 x 345 h 1/2”x 13-5/8” h

mm 50 x 230 h 2”x 9” h

mm 60 x 270 h 2-3/8”x 10-5/8” h

mm Ø 110 x 160 h Ø 4-3/8”x 6-1/4” h

10.8MANIGLIE in ottone brunitoBurnished brass handles

i diri

tti ri

MartellatoHammered

mm Ø 70 x 58 h Ø 2-3/4”x 2-1/4” h

mm Ø 50 Ø 2”

mm 40 x 260 h 1-5/8”x 10-1/4” h

10146 01

mm 34 x 70 h 1-3/8”x 2-3/4” h

10147 03

mm 50 x 120 L 2”x 4-3/4” L

10146 02

10.8MANIGLIE non verniciateHandles without pa int

i diri

tti ri

mm 85 x 125 L 3-3/8”x 5” L

10159-202

mm 80 x 165 L 3-1/8”x 6-1/2” L

10159-203

mm 90 x 150 L 3-1/2”x 6” L

10159-215

mm 125 4-7/8”

mm 75 x 125 L 3”x 5”

10159-201

mm 125 4-7/8”

mm 165 6-1/2”

mm 125 4-7/8”

i diri

tti ri

MartellatoHammered

mm 75 x 200 h 3”x 8”

10159-401

mm 115 x 300 h 4-1/2”x 12”

10159-405

mm 65 x 70 h 2-9/16”x 2-3/4”h

10159-101

mm 85 x 70 h 3-3/8”x 2-3/4”h

10159-102

mm 301-3/16”

mm 853-3/8”

mm 301-3/16”

i diri

tti ri

mm 45 x 280 h 1-3/4”x 11” h

10159-410

mm 40 x 200 h 1-5/8”x 8” h

10159-701

mm 110 x 150 h 4-3/8”x 6” h

10159-601

mm 75 x 150 h 3”x 6” h

10159-708

10.9SUPPORTI e CARDINI per cancelliGates supports and h inges

i diri

tti ri

MartellatoHammered

Ø 6 x 30 hØ 6 x 35 hØ 6 x 40 hØ 6 x 20 hØ 6 x 25 hØ 8 x 20 hØ 8 x 25 hØ 8 x 30 hØ 8 x 35 hØ 8 x 40 hØ 8 x 50 h

1/4”x 1-3/16” h1/4”x 1-3/8” h1/4”x 1-5/8” h1/4”x 3/4” h1/4”x 1” h5/16”x 3/4” h5/16”x 1” h5/16”x 1-3/16” h5/16”x 1-3/8” h5/16”x 1-5/8” h5/16”x 2” h

1020010201102021020510206102081020910210102111021210213

Ø 12 x 23 hØ 15 x 25 hØ 20 x 28 h

Ø 1/2”x 7/8” hØ 5/8”x 1” hØ 3/4”x 1-1/8” h

102201022110222

15 x1520 x 20

5/8”x 5/8”3/4”x 3/4”

1022510226

Ø mm 65 Ø 2-9/16”

❍ 12 1/2”10400

mm 110 x 120 h 4-3/8”x 4-3/4” h

■ 16 5/8”10401

mm 110 x 120 h 4-3/8”x 4-3/4” h

■ 16 5/8”10402

Ferro pieno piattoFlat solid iron

■Ferro pieno quadroSquare solid iron

i diri

tti ri

mm 95 x 180 h 3-3/4”x 7” h

■ 14 9/16”10403

mm 80 x 150 h 3-1/8”x 6” h

■ 12 1/2”10404-125B

mm 75 x 230 h 3”x 9” h

■ 12 1/2”10404-225B

mm 130 x 125 h 5-1/8”x 5” h

❍ 10■ 12■ 40 x 6

3/8”1/2”1-5/8”x 1/4”

10404-525

mm 130 x 125 h 5-1/8”x 5” h

❍ 10■ 12■ 40 x 6

3/8”1/2”1-5/8”x 1/4”

10404-525B

mm 110 4-3/8”

mm 85 3-3/8”

mm 60 2-3/8”

mm 75 3”

i diri

tti ri

MartellatoHammered

mm 100 x 300 h 4”x 12” h

sp 8 th 5/16”10405

mm 80 x 230 h 3-1/8”x 9” h

sp 6 th 1/4”10406

mm 60 x 60 h 2-3/8”x 2-3/8” h

❍ 10■ 30 x 8

3/8”1-3/16”x 5/16”

10407-282B

mm 130 x 50 h 5-1/8”x 2” h

❍ 10■ 30 x 8

3/8”1-3/16”x 5/16”

10407-182 3/8”1-3/16”x 5/16”

mm 130 x 50 h 5-1/8”x 2” h

❍ 10■ 30 x 8

10407-182B

mm 60 x 60 h 2-3/8”x 2-3/8” h

❍ 10■ 30 x 8

3/8”1-3/16”x 5/16”

10407-282

mm 70 2-3/4”

mm 60 2-3/8”

i diri

tti ri

mm 170 h 6-3/4” h

sp 10 th 3/8”10410

mm 110 h 4-3/8” h

sp 10 th 3/8”10411

mm 170 h 6-3/4” h

sp 10 th 3/8”10415

mm 150 h 6” h

■ 40 x 4 1-5/8”x 1/8” 2”x 3/8” 1-5/8”x 1/8” 2”x 3/8”10417-086

mm 170 h 6-3/4” h

■ 50 x 1010417-091B

mm 150 h 6” h

■ 40 x 410417-586

mm 170 h 6-3/4” h

■ 50 x 1010417-591B

mm 120 x 260 h 4-3/4”x 10-1/4” h

sp 3 th 1/8”10454

i diri

tti ri

MartellatoHammered

mm 160 x 270 h 6-1/4”x 10-5/8” h

sp 3 th 1/8”10450

mm 160 x 270 h 6-1/4”x 10-5/8” h

sp 3 th 1/8”10451

i diri

tti ri

mm 130 x 320 h 5-1/8”x 12-5/8” h

sp 4 th 1/810456

mm 100 x 320 h 4”x 12-5/8” h

sp 4 th 1/810455

th 1/8

mm 130 x 410 h 5-1/8”x 16-1/8” h

sp 410459

i diri

tti ri

MartellatoHammered

mm 100 h 4” h

Ø 20 3/4”12200

mm 122 h 4-7/8” h

Ø 24 15/16”12201

mm 146 h 5-3/4” h

Ø 30 1-3/16”12203

mm 146 h 5-3/4” h

Ø 30 1-3/16”12205 Ø 20 3/4”Ø 25 1”Ø 30 1-3/16”

110 h 4-3/8” h130 h 5-1/8” h160 h 6-1/4” h

12206-02012206-02512206-030

10.10RICCI IN ALLUMINIOAluminium scrolls

i diri

tti ri

■Ferro pieno tondoRound iron

●Ferro pieno quadroSquare iron

1001-A63 ■ 12 x 6 1/2”x1/4”

mm 80 x 180 h 3-1/8”x 7” h

1015-A63 ■ 12 x 6 1/2”x1/4”

mm 60 x 115 h 2-3/8”x 4-1/2” h

1005-A63 ■ 12 x 6 1/2”x1/4”

mm 70 x 140 h 2-3/4”x 5-1/2” h

4” mm

1030-A63 ■ 12 x 6 1/2”x1/4”

mm 120 x 220 h 4-3/4”x 8-5/8” h

mm 652-9/6”

1035-A63 ■ 12 x 6 1/2”x1/4”

mm 120 x 290 h 4-3/4”x 11-3/8” h

mm 702-3/4”

1040-A63 ■ 12 x 6 1/2”x1/4”

mm 125 x 360 h 5”x 14-1/8” h mm 250 x 720 h 10”x 28-3/9” h mm 250 x 900 h 10”x 32-1/4” h

mm 753”

3230-A25 ■ 12 1/2” 3232-A25 ■ 12 1/2”

10.10SAGOMATI IN ALLUMINIOAluminium shaped balusters

i diri

tti ri

MartellatoHammered

mm 2108-1/4”

5065-A255065-A26

■ 12■ 14

1/2”9/16”

mm 1000 h39-3/8” h

5065-A455065-A46

● 12● 14

1/2”9/16”

mm 1000 h39-3/8” h

5115-A255115-A26

■ 12■ 14

1/2”9/16”

mm 1000 h39-3/8” h

5115-A455115-A46

● 12● 14

1/2”9/16”

mm 1000 h39-3/8” h

10.10SAGOMATI IN ALLUMINIOAluminium shaped balusters

i diri

tti ri

mm 2108-1/4”

6030-A256030-A26

■ 12■ 14

1/2“9/16”

mm 1000 h39-3/8” h

5232-A455232-A46

● 12● 14

1/2“9/16”

mm 1000 h39-3/8” h

5232-A255232-A26

■ 12■ 14

1/2“9/16”

mm 1000 h39-3/8” h

6031-A256031-A26

■ 12■ 14

1/2“9/16”

mm 1000 h39-3/8” h

6035-A256035-A26

■ 12■ 14

1/2”9/16”

mm 1000 h39-3/8” h

6036-A256036-A26

■ 12■ 14

1/2“9/16”

mm 1000 h39-3/8” h

10.10TORCILIONI E PALETTI IN ALLUMINIOAluminium twisted bars and balusters

i diri

tti ri

MartellatoHammered

RegolabileAdjustable

8026-A258026-A26

■ 12■ 14

1/2”9/16”

mm 1000 h39-3/8” h

8025-A258025-A26

■ 12■ 14

1/2”9/16”

mm 1000 h39-3/8” h

8026-A458026-A46

● 12● 14

1/2”9/16”

mm 1000 h39-3/8” h

8025-A458025-A46

● 12● 14

1/2”9/16”

mm 1000 h39-3/8” h

10.10PALETTI SPINATI IN ALLUMINIO“Herring-bone” alumin ium balusters

i diri

tti ri

8205-A458205-A46

● 12 1/2”

● 14 9/16”

mm 30 x 1000 h1-3/16”x 39-3/8” h

8205-A258205-A26

mm 30 x 1000 h1-3/16”x 39-3/8” h

8210-A258210-A26

■ 12 1/2”

■ 14 9/16”

■ 12 1/2”

■ 14 9/16”

mm 30 x 1000 h1-3/16”x 39-3/8” h

8210-A458210-A46

● 12 1/2”

● 14 9/16”

mm 30 x 1000 h1-3/16”x 39-3/8” h

1/4”

PIATTI E CORRIMANI IN ALLUMINIOAluminium flat bars and handrails

i diri

tti ri

MartellatoHammered

3000 h 118” h9529-A87

■ 40 x 8 1-5/8”x 5/16”

■ 40 x 8 1-5/8”x 3/16”P1 9529-A87

mm 140 x 250 h 5-1/2”x 10” h

■ 30 x 8 1-3/16”x 5/16”

■ 40 x 8 1-5/8”x 5/16”

9540-A829540-A87

mm 3000 h 118” h

■ 12 1/2”

■ 14 9/16”■ 25 1”

9545-A259545-A269545-A31

mm 3000 h 118” h

PIATTO BATTUTO SU 4 SPIGOLIHAMMERED ALL 4 EDGES FLAT BAR

QUADRO BATTUTO SU SPIGOLIHAMMERED EDGES SQUARE BAR

10.10CERCHI IN ALLUMINIOAluminium r ings

i diri

tti ri

■ 12 x 6 1/2”x 1/4”

Ø 100 4”10065-A100

■ 14 x 5 9/16”x 3/16”

10301-A100 Ø 100 4”

■ 12 1/2”

Ø 100 4”10355-A100

■ 14 9/16”

10360-A100 Ø 100 4”

● 12 1/2”

Ø 100 4”10385-A100

● 14 9/16”

10390-A100 Ø 100 4”

10.11RUOTE e CARDINI per cancelliGates accessories

i diri

tti ri

Senza ForoWithout hole

ForatoWith hole

PortataCapacity

zincato - galvanized

mm 22 x 22 7/8”x 7/8”

78-3/4” L78-3/4” L

2000 L2000 L

39-3/8” L1000 L1228112282

mm 12 x 30 1/2”x 1-3/16”

completa di distanzialispacers included

Ø 80 x 20 Ø 3-1/8”x 3/4”V 1c 200 450Ø 90 x 20 Ø 3-1/2”x 3/4”V 1c 200 450Ø 100 x 20 Ø 3-7/8”x 3/4”V 1c 200 450Ø 120 x 20 Ø 4-3/4”x 3/4”V 1c 200 450Ø 120 x 30 Ø 4-3/4”x 1-3/16”V 2c 400 900Ø 140 x 30 Ø 5-1/2”x 1-3/16”V 2c 400 900Ø 160 x 30 Ø 6-1/4”x 1-3/16”V 2c 500 1100

Ø 90 x 20 Ø 3-1/2”x 3/4”U 1c 200 450Ø 100 x 20 Ø 4”x 3/4”U 1c 200 450Ø 120 x 20 Ø 4-3/4”x 3/4”

U 1c 200 450

Ø 120 x 30 Ø 4-3/4”x 1-3/16”U 2c 400 900Ø 140 x 30 Ø 5-1/2”x 1-3/16”U 2c 400 900Ø 160 x 30 Ø 6-1/4”x 1-3/16”U 2c 500 1100

Ø 90 x 20 Ø 3-1/2”x 3/4”V 1c 200 450Ø 100 x 20 Ø 4”x 3/4”V 1c 200 450Ø 120 x 30 Ø 4-3/4”x 3/4”V 2c 400 900Ø 140 x 30 Ø 4-3/4”x 1-3/16”V 2c 500 1100

Ø 90 x 20 Ø 3-1/2”x 3/4”U 1c 200 450Ø 100 x 20 Ø 4”x 3/4”U 1c 200 450Ø 120 x 30 Ø 4-3/4”x 3/4”U 2c 400 900Ø 140 x 30 Ø 4-3/4”x 1-3/16”U 2c 500 1100

Ø 90 x 20 Ø 3-1/2”x 3/4”V 1c 200 450Ø 120 x 20 Ø 4-3/4”x 3/4”V 1c 200 450Ø 120 x 30 Ø 4-3/4”x 1-3/16”V 2c 400 900

Ø 90 x 20 Ø 3-1/2”x 3/4”U 1c 200 450Ø 120 x 20 Ø 4-3/4”x 3/4”U 1c 200 450

10.11RUOTE e CARDINI per cancelliGates wheels and h inges

Due cuscinettiTwo bearings2c

Un cuscinettoOne bearing1c

PortataCapacity

12301-M120

12301-M124

Ø 30 x 40 h

M24120 x 120 h 4-3/4”x 4-3/4” h

150 x 150 h 6”x 6” h

12305-M120

12305-M124

M20Ø 30 x 40 h Ø 1-3/16”x1-5/8”hM24Ø 30 x 40 h Ø 1-3/16”x1-5/8”h

zincato - galvanizedzincato - galvanized

79 x 79 - 60 h3-1/8”x 3-1/8” - 2-3/8” h85 x 85 - 70 h3-3/8”x 3-3/8” - 2-3/4” h95 x 95 - 80 h3-3/4”x 3-3/4” - 3-1/8” h

Ø 20Ø 3/4”Ø 23Ø 7/8”Ø 28Ø 1-1/8”

Ø 30 x 40 h120 x 120 hØ 30 x 40 h120 x 120 h

Ø 1-3/16”x 1-5/8” h4-3/4”x 4-3/4” hØ 1-3/16”x 1-5/8” h4-3/4”x 4-3/4” h

12307-M120

12307-M124

■ 301-3/16”

■ 351-3/8”

■ 401-5/8”

Ø 30 x 60 h Ø1-3/16”x 2-3/8”h Ø 35 x 69 hØ1-3/8”x 2-3/4”hØ 40 x 80 hØ1-5/8”x 3-1/8”h

■ 351-3/8”

■ 401-5/8”

Ø 30 x 69 hØ 1-3/16”x 2-3/4”hØ 35 x 80 hØ 1-3/8”x 3-1/8”h

i diri

tti ri

Ø 1-3/16”x 1-5/8”

12302-M120

12302-M124

Ø 30 x 40 h

Ø 1-3/16”x 1-5/8”

Ø 30 x 35 hØ 1-5/16”x 1-5/8”hØ 35 x 35 hØ 1-3/8”x 1-3/8”hØ 40 x 35 hØ 1-5/8”x 1-3/8”h

Ø 19Ø 3/4”Ø 22Ø 7/8”Ø 27Ø 1-1/16”

Ø 19Ø 3/4”Ø 22Ø 7/8”Ø 22Ø 7/8”Ø 27Ø 1-1/16”

Ø 24Ø 15/16”Ø 29Ø 1-1/8”Ø 34Ø 1-3/8”Ø 34Ø 1-3/8”

Ø 30 x 50 hØ 1-3/16”x 2” hØ 35 x 50 hØ 1-3/8”x 2” hØ 35 x 50 hØ 1-3/8”x 2” hØ 40 X 50 hØ 1-5/8”x 2” h

i diri

tti ri

Senza ForoWithout hole

ForatoWith hole

12344-00112344-00212344-003

A= 1-3/16”A= 1-3/8”A= 1-5/8”

A= 30A= 35A= 40

12345-MB20 A= 40 A= 1-5/8”M20 x 1,5

12348-MB118 M118 x 1,5

55÷75

2”÷3”

100 4”

40÷601-5/8”÷2-3/8”

1-5/8” h4-3/4”x 4-3/4”2” h6”x 6”

12354-MB20

12354-MB24

M20 x 1,5 40 h120 x 120M24 x 2 50 h150 x 150

1-5/8” h

2” h

12352-MB20

12352-MB24

M20 x 1,540 hM24 x 250 h

1-5/8” h

2” h

12350-MB20

12350-MB24

M20 x 1,540 hM24 x 250 h

12360-001

12360-002

70 x 70 x 50 h2-3/4”x 2-3/4”x 2” hA= 30÷50 A= 1-3/4”÷ 2”85 x 85 x 60 h3-3/8”x 3-3/8”x 2-3/8”hA= 45÷65 A= 1-3/4”÷ 2-9/16”

12361-001

12361-002

75 x 75 x 70 h3”x 3”x 2-3/4” hA= 30÷50 A= 1-3/16”÷ 2”90 x 90 x 80 h3-1/2”x 3-1/2”x 3-1/8”hA= 45÷65 A= 1-3/4”÷ 2-9/16”

1-5/8” h

2” h

12356-MB20

12356-MB24

M20 x 1,540 hM24 x 250 h

zincato - galvanized zincato - galvanized

12415-001

12416-001 105 x 120 x 150 h4-1/8”x 4-3/4”x 6” h

100 x 130 h4”x 5-1/8” h

12425-001 70 x 170 h2-3/4”x 6-3/4” h

Ø 34 x 30 hØ 1-3/8”x 1-3/16” hØ 40 x 44 hØ 1-5/8”x 1-3/4” hØ 30 x 40 hØ 1-3/16”x 1-5/8” hØ 40 x 60 hØ 1-5/8”x 2-3/8” h

M10 M10

12380123811238212383123841238512386

40 x 40 h50 x 50 h60 x 60 h80 x 80 h100 x 100 h120 x 120 h150 x 150 h

1-5/8”x 1-5/8” h2”x 2” h2-3/8”x 2-3/8” h3-1/8”x 3-1/8” h4”x 4” h4-3/4”x 4-3/4” h6”x 6” h

3/4”x 3/4” h1-3/16”x 1-3/16” h1-5/8”x 1-5/8” h2”x 2” h2-3/8”x 2-3/8” h3-1/8”x 3-1/8” h

4”x 4” h4-3/4”x 4-3/4” h6”x 6” h6-7/8”x 6-7/8” h7-7/8”x 7-7/8” h

123871238812389123901239112392

20 x 20 h30 x 30 h40 x 40 h50 x 50 h60 x 60 h80 x 80 h

1239312394123951239612397

100 x 100 h120 x 120 h150 x 150 h175 x 175 h200 x 200 h

100 x 110 x 45 h4”x 4-3/8”x 1-3/4” h115 x 140 x 55 h4-1/2”x 5-1/2”x 2-3/16” h

12412-001

12412-002

i diri

tti ri

12420-001

12420-002

100 x 150 x 230 h A= 130÷2004”x 6”x 9” h A= 5-1/8”÷ 8”120 x 180 x 330 h A= 130÷3004-3/4”x 7-1/8”x 13”h A= 5-1/8”÷ 12”

mm 502”

10 - Architetto DI LEO LEONARDO FERRO BATTUTO...A ruego, en las mismas medidas de los aros del...

Documents