Post on 15-Jan-2016
description
transcript
4.5K Powering signalsMQY, MQM, D2
L8D2 Q4 Q5 Q6
Glyn Kirby
CDD Layout drawings4.5K L8LHCLSD8_0002 & 3
Cold mass ID’s8L 605 Q6
MQM 008
MQML 003
MCBCA 007
606 Q5
MQM 006
MQM 005
MCBCB 012
MCBCA 014
MCBCB 015
605 606 607
607 Q4
MQY 001
MQY 002
MCBYB 001
MCBYA 002
MCBYB 003
List connecting cold masses with magnet ID’s
Signals
LHC main page select:
LHC
Hardware Commissioning
Electrical Circuits
Then select
Then select “Link to signals------”
This page give circuit data
Entities and Signals naming Database
Signals naming
What will we doSignal ID’s for magnet voltage taps
Compare with10KHz SM18 data
Set up the signals to generate the plots
LHC 200 Hz from LHC So less sensitive
Factor of 50 less points
Need plot
generating
program
Need comparison
program !
Temperature sensorshttp://cs-ccr-oas3.cern.ch/Timber
Hi Glyn,
The link that you refer to is our "Naming Database", which is a kind of dictionary, but far from complete.
If you want to see the actual data that is logged, you need to look at the interface on the logging system called Timber http://cs-ccr-oas3.cern.ch/Timber
For more details, it is better to give me a ring.
Ronny Billen
Still to Do!• 605 Q6• MQM 008• MQML 003• MCBCA 007
• 607 Q4• MQY 001• MQY 002• MCBYB 001• MCBYA 002• MCBYB 003
• 606 Q5• MQM 006• MQM 005• MCBCB 012• MCBCA 014• MCBCB 015
Different types of cold mass have different circuits we still need to extract this list from the sm18 voltage traces.
There will be several sets for each cold mass.
From Testing the quench heaters to full current quenches'.
D2 we don’t have anything to compare with as it was tested in the US.
We are asking for data now!