Post on 19-Feb-2021
transcript
Material handling machine
PRELIMINARY
TIER I
Vf em
ission
stand
ards
25 m
261 kW / 268 kW
102–135 t
2
Technical data, equipment R
SLEWING DRIVEGearbox Compact planetary gear with slant-axis hyd-
raulic motor, integrated brake valves
Parking brake Spring-loaded multi-disk brake
Slewing ring External gear slewing ring with 360° protec-tion and pinion gear lubrication
Slewing speed 0–5 rpm, variable
UPPERCARRIAGEDesign Torsion-resistant box design, precision crafted,
steel boom bushingsVery service-friendly design, longitudinal engine
Central lubrication
Automatic central lubrication for equipment and slewing gear raceway
Electrical system
Central electrical distributor, battery disconnect switch
Cooling system 3-circuit cooling system with high cooling output, thermostatically regulated fan drive for oil cooler and water cooler, fan reversal for cleaning
Options Slewing gear brake via foot pedal Peripheral uppercarriage railing for additional safety
LED lighting package Fire extinguisher Maritime climate varnish as corrosion protection
Electric heater for hydraulic tank Low-temperature package for use at temperatures below -20 °C
Hydraulically driven magnetic generator 15 kW/20 kW
HYDRAULIC SYSTEMLoad sensing/LUDV hydraulic system, hydraulicpilot-controlled work functions, load limit sensing control
Pump type Swashplate-type variable-displacement piston pump, load pressure-independent fl ow distri-bution for simultaneous, independent control of work functions
Pump control Zero-stroke control, on-demand fl ow control – the pumps only pump as much oil as will actually be used, pressure purging, load limit sensing control
Operating pressure
max. 350 bar
Filtration High-performance fi ltration with long change interval
Hydraulic tank 900 lControl system Proportional, precision hydraulic actuation of
work movements, 2 hydraulic servo joysticks for the work functions, additional functions via switches and foot pedals
Safety Hydraulic circuits with safety valves, secured emergency lowering of the equipment at engine standstill, pipe fracture safety valves for lift cylinder and stick cylinder
Options Bio-oil – environmentally friendly ToolControl for programming the pressure/rate for up to 10 tools
Additional hydraulic circuit for shear attach-ment
Load moment warning with capacity utili-zation indicator
Overload safeguard with shutdown 60 μm pressure fi lter for attachments 3 μm hydraulic micro-fi lter - SENNEBOGEN HydroClean
ENGINEPower 261 kW/355 hp at 1,800 rpm (TIER IVf)
268 kW/364 hp at 1,500 rpm (TIER IIIa)
Model Cummins QSL 12-C350 Stage IVDirect injection, turbocharged, charge-air coo-ler, reduced emissions, EcoMode, automatic idle, auto-stop, fuel preheating
Cooling Water-cooled, cooler fan reversal
Diesel fi lter With water separator and heating system
Air fi lter Dry fi lter with integrated pre-separator, automatic dust discharge, main element and safety element, contamination indicator
Fuel tank 1000 lDEF tank 100 lElectrical system
24 V
Batteries 2 x 180 Ah, battery disconnect switchOptions Engine block heater
Electric fuel pump
MACHINE TYPEModel (type) 870
PRELIMINARY
3
Technical data, equipment
Subject to change.
R
ATTACHMENTSDesign Decades of experience, state-of-the-art
computer simulation, highest level of stabili-ty, longest service life, large-dimensioned and low-maintenance bearing points, sealed special bearing bushes, precision-crafted, quick-release couplings on the connections - open/close/rotate grapple
Cylinders Hydraulic cylinders with high-quality sealing and guide elements, end position damping, sealed bearing points
Options Ball valves in the hydraulic lines for quick and easy grapple switching
Kinematics position II for greater working depth
Maritime climate varnishing Maritime climate coating of all cylinders, nickel-plated and chrome-plated
Float position of the equipment Hoisting limiter / stick limitation adjustable for stop settings, e.g. in the hall
CAB Cab type Hydraulically elevating cab E270
Cab equipment Sliding door, excellent ergonomics, automatic climate control, heated, air-suspension com-fort seat, fresh/circulating air fi lter, joystick control, 12 V/24 V connections, SENCON
Options Cab E300/260 can be elevated 300 cm and moved forward 260 mm hydraulically
Auxiliary heating system with timer Active charcoal cab fi lter for fresh/recircu-lating air ideal for waste recycling applica-tions
Steering wheel with adjustable steering column
Sliding window in operator door Armored glass windshield, additional safety
Armored glass roof window, additional safety
Safety side window and rear window Floor window for a better view Rolling shade for roof window and winds-hield
Protective roof grating FOPS protective roof grating Protective front grating Radio and CD player with speakers Enlarged industrial cab with undivided armored glass windshield
ELECTRIC DRIVE Option Power: 250 kW, 400 V, 50 Hz
Total connected load: 270 kVA, 355 A fuse not included (alternatively 400 A with magnet system) for 400 V – star-delta motor starter
Advantages: Lowest operating costs, quiet and virtually vibration-free work, long service life of hydraulic components
OPERATING WEIGHTMass
Notice
approx. 93,500 kg870 R basic machine withK18 equipment and3,000 l multi-shell grab
Operating weight variesby design.
UNDERCARRIAGEDesign Wide-gauge crawler undercarriage in a stab-
le, torsion-resistant box design.
Drive Hydraulic traction drive for each crawler integrated in the chassis and connected by a compact planetary gear to an axial piston motor.
Parking brake Spring-loaded, hydraulically ventilated disk brakes. Hydraulic brake valves protect the traction motors when going downhill.
Traveling gear R83-450 telescopic crawler undercarriage with 2.8–4.5 m mechanical track adjustment and maintenance-free B8b C63 crawler track, 7,000 mm long, with canted 800 mm triple grouser track shoes.
Speed 0 - 1.6 km/h Level I: 0 - 3 km/h Level IIOptions Maintenance-free B8b crawler track with
rounded 900 mm fl at track shoes Maintenance-free B8b crawler track with canted 900 mm triple grouser track shoes
R90-550 special undercarriage with integ-rated 2 m pylon
P136-585 crawler gantry with 5 m clearance
PRELIMINARY
4
Load ratings
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
12,512,5
11,11 66
10,5,5
12,5
14,3 11,1 55555
Undercarriage R83-450 Compact boom 10.8 mLoading stick 7.8 m
Cab Maxcab E300/260, hydraulic elevation and tilt feature
Technical features and dimensions subject to change.
Machine shown reversed
R
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
PRELIMINARY
K18
20160126143625
5
Load ratings
Technical features and dimensions subject to change.
Undercarriage R83-450 Compact boom 11.8 mLoading stick 8.8 m
Cab Maxcab E300/260, hydraulic elevation and tilt feature
R
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
PRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
17,27,2
19,3
12,2 0,410,410,4
,410,40,4
K20
Machine shown reversed
20160126143720
6
Load ratings
Undercarriage R90-550Pylon 3.0 m
Compact boom 12.5 mLoading stick 10.8 m
Cab Skylift 900 with Maxcab Industry, cab with hydraulic elevation feature (option)
Technical features and dimensions subject to change.
R
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
PRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
11,2,11 22
9,9,99,55
K22
Machine shown reversed
20160126150946
7
Load ratings
.
Technical features and dimensions subject to change.
Undercarriage ST88Pylon 3.0 m
Compact boom 14.0 mLoading stick 12.3 m
Cab Skylift 700 with Mastercab, cab with hydraulic elevation feature (option)
R
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
PRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
12,61 6
9,99 99
11,7,7
12,21
5555
8,33
7,,66
K25
Machine shown reversed
20160126163349
8
Load ratings
Technical features and dimensions subject to change.
Undercarriage R83-450 Compact boom 13.5 mLoading stick 9.8 m
Cab Maxcab E300/260, hydraulic elevation and tilt feature
R
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
PRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
8,1118,1188,1 15,8,8,8115 8
10,31 310 31010
9,9 7
66666
7
5
20160126144749
Machine shown reversed
B21
9
Load ratings
Technical features and dimensions subject to change.
Undercarriage R90-550Pylon 1.0 m
Compact boom 13.5 mLoading stick 9.8 m
Cab Maxcab E300/260, hydraulic elevation and tilt feature
R
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
PRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
23,33
19,21
10,010,
9,449 449 4
9,5
9,7
9,9
10,910 9
10,9
10,88
9,44
20160126144335
Machine shown reversed
B21
10
Load ratings
Technical features and dimensions subject to change.
RPRELIMINARY
Undercarriage R90-550Pylon 2.0 m
Compact boom 13.5 mLoading stick 12.3 m
Cab Skylift 700 with Mastercab, cab with hydraulic elevation feature (option)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
11,2
0,999910,90,9
9,999
10,1
55555
0
33
20160126150530
Machine shown reversed
B24
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
11
Load ratings
Technical features and dimensions subject to change.
RPRELIMINARY
Undercarriage R90-550Pylon 3.0 m
Compact boom 13.5 mLoading stick 12.3 m
Cab Skylift 700 with Mastercab, cab with hydraulic elevation feature (option)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
21,8221,8 18,21
1111
0
1
20160126150356
Machine shown reversed
B24
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
12
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
22,6622222 18,7
Load ratings
Technical features and dimensions subject to change.
R
Undercarriage P136-585 Compact boom 13.5 mLoading stick 12.3 m
Cab Skylift 700 with Mastercab, cab with hydraulic elevation feature (option)
Machine shown reversed
B24
20160126150743
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
PRELIMINARY
13Technical features and dimensions subject to change.
Dimensions R
870 R with R83-450 undercarriage and Maxcab E300/260 with hydraulic elevation and tilt feature
870 R with R83-450 undercarriage and Maxcab E270 with hydraulic elevation feature
3600(Transport)
1370
525
(675) 3400
4500
5300
5630
2800
3600(Transport)
800
1370
525
(675) 3400
4500
5300
5630
2800
5850
7000
4460
4400
3610
6270
34402600
3725 44
60
4400
3626
3000
6650
344034403440260026002600
3725
3725
3725 44
6044
6044
60
440044004400
3626
3626
3626
3000
3000
3000
PRELIMINARY
14
Dimensions
Technical features and dimensions subject to change.
RPRELIMINARY
870 R with R90-550 undercarriage, Skylift 700, Mastercab with hydraulic elevation feature, and 2.0 m pylon
870 R with R90-550 undercarriage, Maxcab E300/260 with hydraulic elevation and tilt feature, and 1.0 m pylon
6020
6570
3000
9570
4568
6640 73
75
4415
6890
8030
5600
3335
3465
7600
5570
5500
6400
6695
5085
5560
5500
550
6400
6695
3370
3400
5560
15Technical features and dimensions subject to change.
Dimensions R
870 R with P136-585 undercarriage, Skylift 900 and Maxcab Industry cab with hydraulic elevation feature
870 R with ST88 undercarriage, Skylift 700, Mastercab with hydraulic elevation feature, and 3.0 m pylon
44155820
54003
335
5600
9155 98
95
72808425
2175
4395
4765
6350
1133
490
4914
5500
6500
3400
5560
5135
5000
7090
3650449058507210
9000
3400
5560
PRELIMINARY
16
Dimensions R
870 R with R90-550 undercarriage, Skylift 900 and Maxcab Industry cab with hydraulic elevation feature
5500
6400
6695
900 608
5
441565
70
4395
4
1101
0
9100
550
Technical features and dimensions subject to change.
PRELIMINARY
17Technical features and dimensions subject to change.
Transport dimensions R
Load boom Grapple stick Transport length (L) Transport height (H)
K18 10.8 m 7.8 m 15.85 m 3.90 mK20 11.8 m 8.8 m 16.9 m 4.00 m21b 13.5 m 9.8 m 18.3 m 3.95 m*
L
H
* Stick removed
PRELIMINARY
18
Recommended grapples
Dimensions in [mm]
Design / sizeGrapple capa-
city
Weight1 Maximum load capacityShell shape 2
HO G
SGM l kg kg t800.50 800 2420 2610
10.0
1000.50 1000 2480 2655
1500.50 1500 2645 2930
2000.50 2000 2800 3160
2500.50 2500 3130 3615
3000.50 3000 3250 3875
3500.50 3500 3420 4140
Type series / model Power DeadweightBreakaway
forceLoad-bearing capacity in kg
WOKO kW kg kN Slab(safety factor 2)
S-RLB 15 11.7 2400 380 19000
S-RLB 17 17.8 3300 640 32000
S-RLB 19 22.0 5090 790 39500
Recommended magnetic generator: 20–25 kW
SGM multi-shell grab (5 shells)
Design / size Grapple capacity Weight1 Maximum load capacity
SGZ l kg t
2500.60 2500 3350
12.03000.60 3000 3530
3500.60 3500 3720
4000.60 4000 3920
Double-shell grab SGZ
Magnetic plates
SGM multi-shell grab (4 shells)
1) Weight information without grapple suspension , stick bolts, hose system
2) Half-open shells: shell sheet steel width 400 mm, 500 mm wide for 1250 l capacity and higher
*) Available upon request
Design / sizeGrapple capa-
city
Weight1 Maximum load capacityShell shape
HO G
SGM l kg kg t800.50-4 800 2245 2490
10.01000.50-4 1000 2345 2585
1500.50-4 1500 2475 2830
2000.50-4 2000 2660 3075
Detailed information on grapples, as well as log grapples, quick-release systems, and other attachments can be found in the "Attachments" brochure
RPRELIMINARY
19
www.sennebogen.com
SENNEBOGEN Maschinenfabrik GmbH Sennebogenstraße 1094315 Straubing, Germany
Tel. +49 9421 540-144/146Fax +49 9421 43 882marketing@sennebogen.de
This catalog describes machine models, scopes of equipment of individual models, and confi guration options (standard equipment and optional equipment) of the machines supplied by SENNEBOGEN Maschinenfabrik. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment. All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may violate the rights of the owners.Please contact your local SENNEBOGEN sales partner for information concerning the equipment variants off ered. Requested performance characteristics are only binding if they are expressly stipulated upon conclusion of the contract. Delivery options and technical features are subject to change. Errors and omissions excepted. Equipment is subject to change, and rights of advancement are reserved. © SENNEBOGEN Maschinenfabrik GmbH, Straubing/Germany. Reproduction in whole or in part only with written consent of SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany.
Orde
r no.
195
302
870R
-E-0
4161
5
/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages false /GrayImageMinResolution 150 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 333 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.31832 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages false /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Average /MonoImageResolution 300 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /FlateEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier (FOGRA27) /PDFXOutputCondition () /PDFXRegistryName (http://www.color.org) /PDFXTrapped /False
/CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > > /FormElements true /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MarksOffset 6.000950 /MarksWeight 0.250000 /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /WorkingCMYK /PageMarksFile /RomanDefault /PreserveEditing true /UntaggedCMYKHandling /UseDocumentProfile /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice