Post on 21-Jan-2021
transcript
Page 1
276.728.2064 sales@cryocomp.com
A DIVISION OF CRYOFAB, INC
KEEP YOUR COOL
www.CRYOCOMP.com
www.cryocomp.com • 276.728.2064 • sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 2
Welcome to Cryocomp®
KEEPING YOUR COOL IS ALL ABOUT HEAT LEAK
From rocket science to Hollywood blockbusters, Cryocomp®, a division of
Cryofab, Inc., offers the specialized cryogenic and vacuum components
you need to guarantee a reliable, efficient, long-life cryogenic system.
Our valves and accessories are designed and fabricated to the highest
standards for original equipment manufacturers involved in the fabrication and
rehabilitation of:
• Vacuum Insulated Pipe
• Tankage
• Helium Transfer Lines
• Flexible Lines
• Cryogenic Pumps
• Dewars
• and other specialized systems
AT CRYOCOMP® WE STRIVE FOR
• Quality
• Availability
• Reasonable Prices
We pride ourselves on getting you the product you need before the other
guy can even get you a quote.
sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 3
I. CRYOGENIC VALVES
• C2000 Globe, Angle and Y Pattern
- Manual and Actuated
- ½” through 2”
- Variations
• C3000 (same as C2000 but improved)
- Heat Leak for LHe Service
• C5000 (replaced C1000. CV9 style)
- Globe and Angle
• Part Number System
II. ACCESSORIZE YOUR VALVES
III. VALVE SIZING
• Flow Calculation
IV. VACUUM VALVES
• V1000 Vacuum Seal-off Valves
and Valve Operators
- ¼” through 3”
• V2000 Spring Loaded Poppets
• Part Number System
V. CRYOGENIC BAYONETS
• Linde Style, Tube Size
- ¼” ODT to ½” ODT
• Tolerance, Pipe Size
- ½” NPS through 1½” NPS
• Part Number System
VI. SPECIALTY EQUIPMENT
• Vapor Vent
• Manifolds
• Vapor Vent Heater
Catalog Tour
www.cryocomp.com • 276.728.2064 •
sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 4
Cryocomp® Cryogenic Valves are available in ½” through 2” pipe size weld ends. These valves are also available in different body configurations as well as manual and actuated designs. Below are examples of our manual designs:
CRYOGENIC VALVES
C2000 Valve Series – Manual Valves
Manual Valves½” Pipe
MODEL C2041-M21 MODEL C2042-M21 MODEL C2043-M21
Manual Valves1” Pipe
MODEL C2081-M21 MODEL C2082-M21 MODEL C2043-M21
Manual Valves1 ½” Pipe
MODEL C2121-M21
Manual Valves2” Pipe
MODEL C2161-M21
www.cryocomp.com • 276.728.2064 •
sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 5
Cryocomp® Actuated Cryogenic Valves are available in ½” through 2” pipe size weld ends. Below are examples of our actuated valve designs:
C2000 Valve Series – Actuated Valves
Actuated Valves½” Pipe
MODEL C2041-A21 MODEL C2042-A21 MODEL C2043-A21
Actuated Valves1” Pipe
MODEL C2081-A21 MODEL C2082-A21 MODEL C2083-A21
Actuated Valves1 ½” Pipe
MODEL C2041-A21
Actuated Valves2” Pipe
MODEL C2041-A21
CRYOGENIC VALVES
www.cryocomp.com • 276.728.2064 •
sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 6
C3000 Liquid Helium Valve Series
Manual Valves½” Pipe
MODEL C3041-M23 MODEL C3042-M23
Manual Valves1” Pipe
MODEL C3081-M23
Actuated Valves½” Pipe
MODEL C3041-A23 MODEL C3042-A23
Actuated Valves1” Pipe
MODEL C3081-A23
CRYOGENIC VALVES
Cryocomp® Liquid Helium Cryogenic Valves are available in ½” through 2” pipe size weld ends. These valves are also available in different body configurations as well as manual and actuated designs. Below you will see examples of both manual and actuated designs for the industrial helium series:
www.cryocomp.com • 276.728.2064 •
sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 7
Cryocomp® also offers small liquid helium cryogenic valves which are available in ½” through 2” pipe size weld ends. These valves are also available in different body configurations as well as manual and actuated designs. Below you will see examples of both manual and actuated designs for the small liquid helium valve series as well as an adapter kit to switch a valve from a manual valve to an actuator.
C5000 Liquid Helium Valve Series
Manual Valves½” Tube
MODEL C5041-M11 MODEL C5042-M11
Actuated Valves½” Pipe
MODEL C5041-A11 MODEL C5042-A11
Adapter Kit:Manual
To Actuator
C5000 ACTUATOR
ADAPTER KIT
CRYOGENIC VALVES
www.cryocomp.com • 276.728.2064 •
sales@cryocomp.comA DIVISION OF CRYOFA B, INC.
Page 8
Purge Port: 1 = No Port2 = Port with Pipe Plug3 = Port with Relief Valve (150 PSIG)4 = Port with Relief Valve (XXX PSIG) (specify with order)
Vacuum Jacket: 1 = Full Jacket2 = No Jacket3 = Cold Box Jacket4 = Special
Other Features: A = Flow Plug (EQ%)B = Flow Plug (Linear)X = Specify with OrderT = Gas Trap
Design Series: C2000 Series = CV3 ReplacementC3000 Series = LHE ValveC5000 Series = CV9/C1000 Replacement
Size: 04 = ½” (4/8)06 = ¾” (6/8)08 = 1” (8/8)12 = 1½” (12/8)
Body: 1 = Globe Butt Weld Ends2 = Right Angle Butt Weld Ends3 = Y Pattern Butt Weld Ends
Operation: M = ManualA = Actuated/Pneumo/NCB = Actuated/Pneumo/NOC = Actuated/Pneumo/SpecialD = Actuated Valve Assembly without ActuatorE = Actuator with SolenoidF = Actuator with Solenoid and Filter/RegulatorK= Check Valve
Other Feature (specify)JacketPurge PortOperation
Body ShapeSize (⅛”)Design Series: C2000 = Industrial Jacketed Series
C3000 = Industrial Helium SeriesC5000 = Small Helium Valves
C = All Vacuum Jacketed Style Cryogenic Valves
C0000( )-X00XModel Number:
VACUUM JACKETED STYLE CRYOGENIC VALVES
CRYOGENIC VALVES
Part Number System
P = MPTF = FPTT = TubeA = AN Male
M = Butt Weld TubeS = Socket Weld PipeB = Soc Weld TubeC = Soc Solder CopperN = Flare Tube and Nut
www.cryocomp.com • 276.728.2064 •
sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 9
ACTUATOR
ANGLEGLOBE Y-PATTERN
SOLENOID VALVE
FILTER REGULATOR
ACTUATOR with POSITIONER I-P and P-P
LIMIT SWITCHES
RELIEF VALVE
Downstream Thermal Expansion Protection
Relief Valve►
023 45 67 89 10 20 30 40 50 60
7080
90100
20
40
60
80
100
% O
F LI
FT
PERCENT OF MAX. FLOW
EQUAL PERCENTAGE
LINEAR
QUICK OPENING
10
30
50
70
90
Typical Lift Flow Curves
=►
CHARACTERIZED FLOW PLUGS
Characterized Flow Plugs
Equal Percentand Linear
ACCESSORIZE YOUR VALVES
www.cryocomp.com • 276.728.2064 •
sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 10
CV = QL CV = Flow CoefficientQL = Flow (GPM)ρ (Rho) = Density (#/cu.ft.)P1 = Upstream Press (PSIA)P2 = Downstream Press (PSIA)
ρ (Rho)
(P1-P2)(62.4)
BASIC LIQUID FLOW FORMULA
C2000 & C3000 Globe Angle Y Pattern½” 2.6 5.7 5.61” 16.3 28.6 25
1½” 31 37 422” 42.3 54 N/A
C5000 Globe Angle Y Pattern½” 1.1 2.3 N/A
CV
TABLE OF FLOW COEFFICIENTS
DENSITY TABLE FOR COMMON FLUIDS (ρ)
Water 62.4 #/cu.ft.LN2 50.4 #/cu.ft.LH2 4.4 #/cu.ft.LHe 7.8 #/cu.ft.LAr 87.4 #/cu.ft.LO2 71.2 #/cu.ft.
VALVE SIZING
Flow Calculations
www.cryocomp.com • 276.728.2064 •
sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 11
VACUUM VALVES
V1000 Series
¼” - 3” Vacuum
Seal-off Valves
V1000 SEAL-OFF VALVE V1000 SEAL-OFF VALVE WITH SIDE PORT
¼” - 3” Vacuum
Seal-off Valves and Operators
V1000 VALVE OPERATOR
2” Spring Loaded Vacuum
Seal-off Valves and Operators
V2000 SEAL-OFF VALVE V2000 VALVE OPERATOR
Cryocomp® offers two styles of vacuum valves for applications where a user requires a vacuum entry which is simple, reliable and tamper resistant.
The V1000 Vacuum Valve series is simple, inexpensive and reliable. This design ranges in size from ¼” through 3” with matching operators.
The V2000 Vacuum Valve is a larger, spring loaded valve design which has been used for many years on large vacuum spaces like MRI magnets, dewars and cold boxes. With the V2000 Vacuum Valve reliability and simplicity are the important design factors.
V2000 Series
www.cryocomp.com • 276.728.2064 •
sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 12
VACUUM VALVES
Model Number:
Special Detail Seal-off Valve or OperatorBody MaterialSize (⅛”)Design Series
V = All Vacuum Valves and Valve Operators
V0000-0-0
Seal Off Valve or Operator: 1 = Seal-off Valve2 = Valve Operator with Tube End3 = Valve Operator with ISO Flange End (add –XX for ISO size)4 = Valve Operator with ¾” Tube End
Special Detail: 0 = No Side Port1 = ⅛” FPT/TC Port2 = View Port3 = Non-reliving/Snap Ring Groove
or Plug Arrestor Accessory4 =5 =
10 =16 =25 =40 =50 =
Design Series: V1000 Series = SV8/VO8 ReplacementV2000 Series = SV7/VO7 ReplacementV3000 Series = Relief Disc
Size: 04 = ½” (4/8)06 = ¾” (6/8)88 = 1” (8/8)12 = 1-½” (12/8)16 = 2” (16/8)
Body Material: 1 = Aluminum2 = Brass/Bronze5 = Stainless Steel
ISO Flange Size
VACUUM SEAL-OFF VALVES
Part Number System
www.cryocomp.com • 276.728.2064 •
sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 13
CRYOGENIC BAYONETS
CB700 Series
Tube Size Cryogenic
Connection for Vacuum Insulated
Piping and Flex Line Applications
CB700 CRYOGENIC BAYONET
Pipe Size Cryogenic
Connection for Vacuum Insulated Piping Systems
B3000 CRYOGENIC BAYONET
Cryocomp® manufactures the CB700 tube size series and B3000 pipe size series of Cryogenic Bayonets.
The CB700 Cryogenic Bayonet design is a tube size high efficiency cryogenic connection for vacuum insulated piping and flex line applications. This series utilizes a threaded connection nut to facilitate easy connection and separation functions, a nose seal design to maximize efficiency and a silicone o-ring to assure tight sealing at cryogenic temperatures.
The B3000 Cryogenic Bayonet is a high efficiency cryogenic connection for vacuum insulated piping systems. The design utilizes an extremely close fit between the male and mating female bayonet, establishing a gas pocket between the liquid interface and the flange seal. The very small gas pocket and the thin stainless elements contribute to the high efficiency of this design. The primary seal is a silicone o-ring at the ambient flange location. The close design tolerances eliminate the necessity of a nose seal.
B3000 Series
www.cryocomp.com • 276.728.2064 •
sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 14
Length (standards): 3 = 3” Thermal Length6 = 6” Thermal Length9 = 9” Thermal Length15 = 15” Thermal Length
Function: B (or no number) = Bayonet (standard)A = VJ Cap or Plug with Pipe OutletC = VJ Cap or Plug, Blank D = NJ Cap or Plug (pressure only, no cryo)E = NJ Cap or Plug with ¼” FPT (pressure only, no cryo)P = Protective Cover (usually plastic, vented)
Example: VJ Plug, Blank for ½” x 3” Female Bayonet = CB704-5M3C VJ Cap for ½” x 6” Male Bayo with Pipe Outlet = CB704-5F6A
Size: 04 = ½” (4/8)03 = ⅜” (3/8)02 = ¼” (2/8)
Material: 5 = Stainless8 = Plastic
Gender: M = MaleF = FemaleS = Set
FunctionLength (thermal length in inches)Gender Material Size (⅛”)Design Series (all Linde Style Bayonets)
CB700-000XModel Number:
Part Number System
CB7 LINDE STYLE BAYONETS
CRYOGENIC BAYONETS
www.cryocomp.com • 276.728.2064 •
sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 15
Gender: M = MaleF = FemaleS = Set (includes male, female, seal and v-band)
Function: B = Bayonet (standard)A = VJ Cap or Plug with Pipe OutletC = VJ Cap or Plug Blank D = NJ Cap or Plug (pressure only, no cryo)E = NJ Cap or Plug with ¼” FPT (pressure only, no cryo) E-25 = Pressure Plug with KF-25 FlangeP = Protective Cover (usually plastic, vented)
Example: VJ Plug, Blank for ½” Female Bayonet = B3049-MC VJ Cap for Male Bayonet with Pipe Outlet = B3049-FA
Design Series: B3000 Series = CB300 Replacement
Size: 04 = ½” (4/8)06 = ¾” (6/8)12 = 1-½” (12/8)16= 2” (16/8)
Length (standards): 9 = 9” Thermal Length12 = 12” Thermal Length
FunctionGender Length (thermal)Size (⅛”)Design SeriesB = All Bayonets
B0000-00Model Number:
CRYOGENIC BAYONETS
STANDARD BAYONETS
Part Number System
www.cryocomp.com • 276.728.2064 •
sales@cryocomp.comA DIVISION OF CRYOFAB, INC.
Page 16
SPECIALTY EQUIPMENT
½" Vacuum Insulated
Liquid Level Keepfull
K2041 MALE PIPE CONNECTION / K2042 MALE BAYONET CONNECTION
H1300 Vapor Vent Heater
Vacuum Insulated Custom Manifolds
Vapor Vents
The Cryocomp® vapor vent gets rid of vapor and maintains liquid level, usually at a remote location in a piping system or on a container. The vapor vent, otherwise known as a "liquid keepfull" device, allows the boiled off gases to vent but not the liquid. Cryocomp® offers this vacuum insulated vapor vent in two versions:
• The K2041 with a ½” pipe inlet• The K2042 with a ½” tube style bayonet inlet
The pipe inlet design can be installed in any liquid nitrogen system and the bayonet design can be designed into a vacuum insulated piping system for a more efficient interface. The Cryocomp® vapor vent is a fully mechanical system requiring no electrical or pressure assistance.
www.cryocomp.com • 276.728.2064 •