Post on 06-Mar-2018
transcript
ENGINEERING SERVICES PROFILE- 2014
www.atecindia.com
A/303, Pranik chambers, 3 rd Floor, E-mail:- enquiry@atecindia.com, project@atecindia.com
Sakinaka Junction, Saki-Vihar Road, hrd@atecindia.com , mahendra@atecindia.com
Sakinaka, Andheri (E), Mumbai - 400 072 India. Tel No. : +91 8655 016 814 /15/ 16
Web: www.atecindia.com Contact person: Mr. Mahenrda A. Matele. - +91 9892 470355
ENGINEERING SERVICES PROFILE- 2014
www.atecindia.com
ABOUT ARYATECH
AryaTech Engineering & Consultancy.
AryaTech is fully focused innovative in basic & detail engineering, project management services provider as well as manpower outsourcing & skill development through Training based in the financial
hub of India Mumbai.
In a Short Span of time AryaTech has earned trust & confidence of its clients with expertise in plant
design.
We provide services for oil & gas, refineries, process plants, petrochemicals, pharmaceuticals, power plants, pigments and other chemical industries.
AryaTech has well experienced and trained staff with a capacity of 10,000 man Hrs per
month. Our Team strength of “35+” technical personnel includes engineers as piping, process, mechanical, 3D/ modelers, designers, structural /civil checkers and draftsmen.
We are well conversant with Indian, ASME standards. AryaTech has most modern amenities that ensure our clients are served with utmost satisfaction.
AryaTech has secured the faith of our customers through efficient functioning; value added services,
adherence and commitment to quality standards that has ensured clients absolute trust on us.
AryaTech team is always willing to take challenge, maybe it is for complex structures, tight delivery
schedules with customized and job specific services.
OUR VISION & MISSION To provide error free engineering services within schedule & effective cost.
We strive to achieve our vision through,
• Deep integrity, Commitment & Ethical code of business.
• Developing leadership through result oriented culture.
• Focus on 100% client satisfaction.
To become single point contact for our client for all its engineering requirements.
ENGINEERING SERVICES PROFILE- 2014
www.atecindia.com
OUR CORE PROFESSIONAL TEAM
Name & Designation
Brief Profile
Mr. S. D.
BARDE
PROCESS
Mr. Barde is the Visionary leader at AryaTech Engineering and Consultancy with
more than 33 years of experience in Chemical Industry, A Chemical Engineer
from LIT Nagpur He has worked with industry leaders like…
• Konkan chemicals Pvt. Ltd.
• Savita chemicals Pvt. Ltd.,
• Oil & Natural Gas Commission,
• Chemtex Engineering of India Ltd. as a HOD.
ISO Exposure
Major contribution in Company’s Quality Management Systems and ISO-9000 certification.
Involved in the development of company standard procedures.
Fully involved in the standardization of DuPont Polyester Technology Package.
He was one of the Nominees for DuPont’s Excellence award for the contribution
in Standardization of Technology package.
Mr. R. P.
SAMANT
PIPING
Mr. Samant is having more than 26 years of working experience at various
capacities with companies & Clients like….
• M/S. Petroleum Consulting Engineers pvt. Ltd.,
• SAUDI ARABIAN OIL COMPANY (SAUDI ARAMCO), (KOC) KUWAIT
OIL COMPANY.
• Gujrat Alkalies And Chemicals Ltd. (GACL),M/S. Desmet Bellestra,
Mumbai,
• M/S. Tata Consultancy, Mumbai,
• M/S. Voltas Limited, Thane.
His knowledge of International codes and standards in various fields like Pressure
vessels, Storage tanks, Piping, NDT, Welding, Materials, Inspection, Painting and
coating and cathodic protection is an asset to our company.
Mr. M. A.
MATELE
Business
development
Mr. Matele is a Chemical Engineer, With more than 08 years of experience; He
has worked with industry leaders like IBI Chematur Ltd. His all rounded career
has spanned variety of functions like Project Co-ordination, Execution and
Consultancy, Marketing, Engineering Services. He has handle Plant Design of
various projects
• Gujarat Narmada Fertilizer Corporation (GNFC)
• Poly Propylene oxide(PC2) by SNC –Lavalin ltd (A Saudi Aramco project)
• DIPA , Isopropyl Alcohol , DFPCL,Taloja
• Ethanol (biostill) 60KLPD (In-house project of IBIC)
• Acetic Acid & Ethyl Acetate (In-house project of IBIC)
Mr. V. S.
PITALE
2D & 3D
DESIGN
Mr. Pitale is a Great experience holder combined with cross functional capabilities
Onshore/Offshore site survey and other engineering works.
• M/s. Qatar General Petroleum Corp.,
• M/s. Gramhereme International Ltd.,
• M/s. Sharkat Hani L.L.C., Muscat, Sultanat of Oman,
• M/s. Sigma Offshore Mussafaa, Humphreys & Glasgow Consultant Pvt. Ltd.,
• M/s. Indabrator Ltd. Hindustan Dorr-Oliver Limited.
In his career spanning more than 24 years.
Mr.S.
V.NAIK PROCESS
Mr. Naik is a Great experience holder combined with cross functional capabilities
Onshore/Offshore site survey and other engineering works. He has worked with wide spectrum of companies like
• Chemtex Engineering of India Ltd
• Daelim Industrial Co., Ltd, Korea
• UHDE India Ltd, Pune, Maharashtra, India
• In his career spanning more than 27 years.
ENGINEERING SERVICES PROFILE- 2014
www.atecindia.com
Mr. A. N.SHAH MECHANICAL
& PIPING
Mr. Shah is a Great experience holder combined with cross functional capabilities Onshore/Offshore site survey and other engineering works. He has
more than 30 years Experienced in Oil & Gas Projects.
• IBI Chematur
• His knowledge of International codes and standards in various fields like
Pressure vessels, Storage tanks, Piping, NDT, Welding, Materials,
Inspection, Painting and coating and cathodic protection is an asset to our
company.
Mr.GAURANG SHAH
PROJECT MANAGER
Responsible to timely deliverable of engineering documents. Coordinating with
Client, PMC, design Office (In Mumbai) & Site. Finalizing of conceptual plot
layout based on site survey report in consultation with client. Participated in
HAZOP and constructability review study. Closely interacting with site to
arrange engineering document (IFC) as per site plan. Follow-up with client to obtain timely approval on drawings and documents.
Closely interacting with detail engineering group to deliver drawings /
documents. Taking part in progress review meeting and monitored progress on
regular basis.
Mr. FAISAL
KHAN
PROJECT
COORDINATOR
Coordinating with Client, PMC, design Office (In Mumbai) & Site.
Coordinating with detail engineering group to deliver drawings / documents.
Coordinating progress review meeting and monitored progress on regular basis.
Follow-up with client to obtain timely approval on drawings and documents.
SERVICES OFFERED BY ARYATECH
• DETAIL ENGINEERING SERVICES.
• MANPOWER OUTSOURCING.
• TRAINING & SKILL ENHANCEMENT.
ENGINEERING SERVICES
• BASIC ENGINEERING.
• MULTI-DISCIPLINARY DETAIL ENGINEERING.
• PROCUREMENT ASSISTANCE
• DRAWINGS CONVERSION TO AUTOCAD. {MANUAL TO CAD}
• ENERGY AUDITS.
• PLANT TROUBLESHOOTING.
• HAZOP STUDY.
• AS BUILT SERVICES / DRAFTING SERVICES.
ENGINEERING SERVICES PROFILE- 2014
www.atecindia.com
BASIC ENGINEERING PACKAGE
• GENERAL DESIGN BASIS & SPECIFICATION FOR MAJOR
EQUIPMENT.
• PROCESS FLOW SHEETS, HEAT & MATERIAL BALANCE.
• PRELIMINARY PFD & P&ID DEVELOPMENT.
• PRELIMINARY PLOT PLANS, EQUIPMENT LAYOUT & CIVIL
INFORMATION DRAWINGS.
• ELECTRICAL LOAD LIST, INSTRUMENT LIST.
MULTI-DISCIPLINE DETAIL ENGINEERING
• PROCESS ENGINEERING.
• INSTRUMENTATION ENGINEERING.
• ELECTRICAL ENGINEERING.
• MECHANICAL ENGINEERING.
• PIPING ENGINEERING.
• CIVIL & STRUCTURE ENGINEERING.
PROCESS ENGINEERING
• PREPARATION OF PROCESS FLOW DIAGRAMS (PFD), PIPING AND
INSTRUMENT DIAGRAMS (P & ID), EQUIPMENT PROCESS DATA
SHEET INSTRUMENT PROCESS DATA SHEETS ETC.,
• DESIGN OF PLANT HYDRAULICS & PUMPING SYSTEM.
• PROCESS DESIGN OF COLUMNS, EXCHANGER, SEPARATORS, KO
DRUMS ETC.
• SAFETY VALVE & FLARE NETWORK STUDIES.
• UTILITY & SYSTEM PACKAGES
• TECHNICAL BID ANALYSIS AND VENDOR DATA REVIEW
• HAZOP & SAFETY STUDIES, COMMISSIONING & PLANT
TROUBLESHOOTING.
ENGINEERING SERVICES PROFILE- 2014
www.atecindia.com
INSTRUMENTATION ENGINEERING
• PREPARATION OF CONTROL PHILOSOPHY, DETAILED EXECUTION
DRAWINGS.
• PREPARATION OF INTERLOCK LOGIC DIAGRAMS, INSTRUMENT
INDEX
• SPECIFICATIONS OF CONTROLS SYSTEM (DCS/PLC) & FIELD
INSTRUMENT.
• PREPARATION OF JUNCTION BOX TERMINATION DRAWINGS,
INSTRUMENT HOOK UP DRAWING,WIRING DIAGRAMS, CABLE
SCHEDULE ETC,
• PREPARATION OF CABLE TRAY / CABLE TRENCH LAYOUTS DESIGN OF PLANT.
ELECTRICAL ENGINEERING
• PREPARATION OF ELECTRICAL SINGLE LINE DIAGRAM.
• SELECTION OF HV/LV SWITCHGEAR, MOTOR CONTROL CENTERS.
• LAYOUT FOR SWITCHYARD / TRANSFORMER LAYOUTS,
SWITCHGEAR / MCC ROOM LAYOUT,
• BATTERY ROOM LAYOUTS. CABLE TRAY / TRENCH LAYOUTS,
CABLE ROUTING LAYOUTS.
MECHANICAL ENGINEERING
• DESIGN OF COMPLETE RANGE OF PROCESS EQUIPMENTS. (TANK,
VESSEL, REACTOR)
• MECHANICAL DESIGN & DETAILED ENGINEERING USING THE
INTERNATIONAL CODES &STANDARD E.G. ASME SEC. VIII DIV. 1 &
2, API 650 ETC.
• STRESS ANALYSIS, THERMAL ANALYSIS FOR EQUIPMENT LIFE
EVALUATION USING FINITE ELEMENT ANALYSIS.
• PREPARATION OF TECHNICAL BID FOR THE PROJECTS.
• DEVELOPMENT OF FABRICATION DRAWINGS & NOZZLE
ORIENTATION DRAWINGS.
CIVIL & STRUCTURE ENGINEERING
• PREPARATION DETAILED FOUNDATION DRAWINGS FOR
EQUIPMENTS.
• DESIGN CALCULATIONS AND PREPARATION OF DETAILED
STRUCTURAL DRAWINGS, FABRICATIONDRAWINGS AND BOM.
• ENGINEERING OF SKIDS AND MODULAR STRUCTURES & MTO.
ENGINEERING SERVICES PROFILE- 2014
www.atecindia.com
PIPING ENGINEERING
• PLOT PLAN DEVELOPMENT & CONCEPTUAL PIPE ROUTING.
• PREPARATION OF EQUIPMENT GA AND PIPING GA
• PREPARATION OF ISOMETRICS WITH BOM/MTO
• PIPING MATERIAL SELECTION AND SPECIFICATION.
• STATIC & DYNAMIC STRESS ANALYSIS
• DESIGNING SUPPORT SPECIFICATIONS & DRAWING.
• PLANT 3-D MODELING AND CLASH DETECTION.
• EXTRACTION OF ISOMETRIC FROM 3-D MODEL WITH BOM/MTO.
2D DRAWINGS & 3D- MODELS
ENGINEERING SERVICES PROFILE- 2014
www.atecindia.com
AS BUILT DOCUMENTATION & DRAFTING SERVICES
• PREPARATION OF ALL DOCUMENTATION REQUIRED FOR ASBUILT
ENGINEERING.
• PREPARATION OF PLOT PLAN, EQUIPMENT LAYOUT, PIPING GA AS
PER THE SITE MARKS –UP.
• PREPARATION OF P & ID.
• CREATE DRAWINGS FROM MARK-UPS, SKETCHES.
• CREATE NEW DRAWING AS PER SPECIFICATIONS AND STANDARDS.
• DEPUTATION OF PROFESSIONAL AUTOCAD DRAUGHTSMAN, SR.
DESIGNERS FOR CARRYING OUT
• ABOVE WORK AT CLIENT SITE.
ENGINEERING SERVICES PROFILE- 2014
www.atecindia.com
MANPOWER OUTSCORING
AryaTech Provide Skilled & Technical Manpower to various EPC, Engineering
Consultancy Firms & Chemical Process Plants for speedy Execution of Project.
We have pool of Skilled & Experienced Engineers & Designers from all Disciplines for Short & long
Term Deputation or for full-time Employment.
Depending on Client Requirements, we also undertake Projects at Client Location/Site. This helps clients
to retain his valuable data within its premises & effectively monitor the schedule With Proper Co-
ordination within Project Teams.
FEATURES WORKING AREA
STRONG CLIENT REFERRALS ENGINEERING DESIGN
COST SAVING PROCUREMENT
FAST AND QUALITY
MANPOWER EXPEDITING
FLEXIBILITY IN HIRING PROJECT SUPERVISION /
MANAGEMENT
FOCUS OF CORE
COMPETENCIES
CONSTRUCTION SUPERVISION /
MANAGEMENT
NO PERMANENT LIABILITIES INSPECTION/ SAFETY/HAZOP
GOVERNMENTSTATUTORY
COMPLIANCE
START-UP, PRE-COMMISSIONING &
COMMISSIONING
LOW HEAD COUNT SHUTDOWN / TURN AROUND/
OPERATIONS & MAINTENANCE
OUR SERVICES CATER TO DEPUTATION FOR FOLLOWING ACTIVITIES
• DESIGN & DETAILED ENGINEERING FOR ALL THE DISCIPLINE OF
ENGINEERING.
• 2D DRAFTING. (AUTOCAD/MICRO STATION/SMART SKETCH)
• 3D DESIGNERS & MODELERS. (PDS/PDMS/CAD WORK/AUTO PLANT)
• PROJECT CO-ORDINATION/ MANAGEMENT.
• PROCUREMENT/INSPECTION/EXPEDITING.
• ERECTION / CONSTRUCTION SUPERVISION.
• COMMISSIONING ASSISTANCE.
ENGINEERING SERVICES PROFILE- 2014
www.atecindia.com
INDUSTRIAL TRAINING
Engineering is the discipline, art and profession of acquiring and applying technical,
Scientific and mathematical knowledge to design and implement materials, Structures, machines, devices, systems, and processes that safely realize a desired Objective or invention.
Our aim is to develop the competency of engineering professionals in order to meet Fast growing demand of engineering sector in India & Worldwide.
We undertake Individual as well as corporate Training & Skill Development of Professional for their
career benefit & long term employment.
TRAINING COURSES
• CHEMICAL PROCESS DESIGN ENGINEERING. (CDPE)
• PIPING DESIGN ENGINEERING. (PDE)
• INSTRUMENT DESIGN ENGINEERING. (IDE)
• ELECTRICAL DESIGN ENGINEERING. (EDE)
• PROCESS EQUIPMENT DESIGN ENGINEERING. (PEDE)
• SOFTWARE TRAINING FOR CORPORATE AS WELL AS INDIVIDUALS.
• (PDMS/ PDS, CAESAR II, SP P& ID, SPI, SP3D, SP EL, PV ELITE/CADWORXS
ETC.)
PDMS 3D MODEL
Visit us on www.atecindia.com
ENGINEERING SOFTWARE & TOOLS
PROCESS ENGINEERING
HYSYS Process Simulation
Pipe Net Hydraulic Analysis
Smart Plant P & ID Generation
MECHANICAL/PIPING
ENGINEERING
PDMS/PDS Plant 3D Modeling
CADWORX / Isogen Piping Isometric
Caesar II Stress Analysis/PV Elite
Pressure Vessel Design
ELECTRICAL ENGINEERING
SPEL Smart Plant Electrical
ETAP Electrical System Design
INSTRUMENTATION ENGINEERING
IN TOOLS Instrumentation Spec
CIVIL & STRUCTURAL
ENGINEERING.
STADD Structural Analysis
X-Steel Structural Detailing
PROJECT MANAGEMENT
Primavera Project Planning & Control MS Project
Visit us on www.atecindia.com
Engineering Projects
SR.
NO
CLIENT
PROJECT DESCRIPTION
PERIOD
1
MICAS
Organic, Vapi
Revamping of Pigment & Dye
Plant 3D Modeling
1 year
2
TCE- Cadbury Prep. As built DWG 6 Month
3
TCE – IGCAR
Project –OSBL
Preparation of Isometric
Piping Layout.
6 Month
4
JAI-SHIV
Revamping & As built DWG 1 year
5
TOYO Auto
Cad drafting work
1Month
6
ENQUIOX
P & ID Drafting 1Month
7
LIBRA As built work on P & IDs &
Equipment/Piping Layout
4 Months
8
INVENSYS
Logic development job,
Integration with model DCS &
Logic testing
6 Month
9
NEON InfoTech
South East Asia
Corporate training
PV Elite Pressure Vessel
CADWORX/PDMS/PDS Plant 3D Modeling. Caesar II.
1 year
10
TATA
Consulting
Engineering
(TCE)
Corporate training
IN TOOLS Instrumentation
Smart Plant P & ID Generation.
6 Month
11 INVENSYS HMI Development Work 01 Year
12 ACE Energy &
Infra
Detail Engineering 01 Year
13 ONGC Drafting of Instruments & Electrical Logic Diagram
01 Year
14 Metso & Ctm Drafting of Instruments & Electrical Logic Diagram
01 Year
15 Blue star IBR Piping Detail Engineering
06 Months